for Strobes and Lights

on stock

Fiber Optic Calble for Remote Control

You need this fibre optic cable to operate the remote control on the matching Weefine lamps comfortably from the handle of your housing. The cable is not recommended for use with underwater flashes!

€48.00*

on stock

Adapter for fibre optic cable to INON

Adapter to connect fibre optic cables with connectors (Sea&Sea standard) to INON flashes.

€6.50*

Remote Control for Weefine lights

With this remote control you can operate the matching Weefine lamps conveniently from the handle of your housing. To use this remote control you need a CR123A battery and fibre optic cable (both not included).

€81.00*

Adapter for fibre-optic cable to Nauticam

Adapter for connecting fibre optic cables with plugs (Sea&Sea standard) to Nauticam underwater housings.

€6.50*

on stock

O-rings for 1 inch ball head (blue)

Standard clamp for mounting two arms, base adapters and flash adapters.

€9.90*

Rubber Bush Type L

An angled type rubber bush which is packaged in Optical D Cable Type L Double Hole Rubber Bush Set.

€12.00*

on stock

Lens Holder with M52&M67

Vorsatzlinsenhalterung für Linsen sowohl mit M67 als auch mit M52 Schraubgewinde. Diese Halterung lässt sich sowohl an der Klemme PRO als auch der Griffschiene von Weefine festschrauben.

€26.50*

on stock

Z Adapter MV

An adapter to attach S220/Z-330/D-200/S-2000/Z-240/D-2000 strobe or Double Light Holder LE/Strobe Light Holder LE on an arm body or Direct Base III etc. via clamp. The ball-joint is made from plastic to provide flexible strobe positioning without loosening a clamp to provide comfortable strobe aiming.

€24.90*

on stock

M67 Lens Holder for Float Arm by Inon

A lens holder attached on a Float Arm/Mega Float Arm/Mega Float Tube or on the "M5 Joint" installed on a Stick Arm/Multi Ball Arm (*1) to carry M67 series/28M67 series attachment lens to help comfortable multiple lens handling underwater. The lens holder is screwed on an arm or M5 Joint through center screw hole. (*1) "Multi Ball Arm SS" is not compatible with the "M5 Joint". "Stick Arm XS-T" and "Multi Ball Arm S" can hold the "M5 Joint" but not compatible with a lens holder.

€29.00*

on stock

Cover for INON Strobes

Eine Blitzabdeckung aus Neopren, wie sie auch bei den Unterwasseranzügen verwendet wird. Diese Hülle schützt den Blitz vor unbeabsichtigten Beschädigungen beim Tauchen sowie beim Transport durch das gepolsterte Material. Zwei Schlitze auf beiden Seiten sind für eine effektive Wärmeabstrahlung ausgelegt.

€29.00*

Lens holder (M67) with ball head

The M67 Lens Arm is attached on ball-joint arm system enabling M67 Mount Base non-compatible underwater housing to use INON close-up lens "UCL-330"/ "UCL-165M67".

€49.00*

on stock

Z Joint by INON

A joint adapter to attach Z-330/D-200/S-2000/Z-240/D-2000 strobe on YS type arm head including Grip Base D4/Grip Base M1/D Holder/Shoe Base II/YS Adapter MV/YS Arm/Direct Base YS RT etc. Also usable to attach an LED flashlight product on YS type arm head in combination with Double Light Holder LE/Quad Light Holder LE/Strobe Light Holder LE/Strobe Light Holder LF. Compatible strobe/light etc. Z-330, D-200, S-2000, Z-240, D-2000, D-2000S, D-2000W/Wn, D-180 (*1), D-180S, Z-220 (*1), Z-220F, Z-220S (*1), Strobe Light Holder LE, Double Light Holder LE, Quad Light Holder LE, Strobe Light Holder LF, SD Front Mask for HERO5/6/7, SD Front Mask STD, SD Mount Cage for HERO3/3+/4, SD Mount Base for TG-Tracker, SD Mount Base UWH1 Compatible base/arm etc. Shoe Base II, YS Adapter MV, Double YS Adapter MV, YS Adapter WB MV, YS Adapter, YS Arm M ,YS Arm MS ,Bar Mount, Grip Base D4, Grip Base M1, D Holder, D Holder Extension Bar, Port Arm for MRS, Port Arm for UFL-MR130 EFS60, Direct Base YS RT, Direct Base YS

€24.00*

Ball Joint adaptor (90° angle)

Ball joint of 25mm with 90° angle mount.

€37.00*

on stock

O-rings for 1 inch ball head (green)

Coloured O-rings for 1-inch ball head in green.

€9.90*

Strobe Cover for YS-D1/D2

Strobe protection cover made of fine-mesh outer shell (upper material) and neoprene (lining).

on stock

Ball Joint 45° angle for T-Socket

Ball joint of 25mm with 45° front angle mount.

€42.50*

on stock

Fluorodiving Mask

This yellow fluoro mask and strap is specially designed to precisely match coral fluorescent wavelengths.

€29.90*

on stock

Ersatz-O-Ringe für 1-Zoll-Kugelköpfe

Set von 4 Ersatz-O-Ringe für 1-Zoll-Kugelköpfe von Sea&Sea

€8.95*

on stock

O-rings for 1 inch ball head (red)

Coloured O-rings for 1-inch ball head in red.

€9.90*

on stock

Direct Base III

The Direct Base III is a fundamental part to attach arm system. Directly attached on the Grip Base D4 / Grip Base M1 / D Holder / SD Front Mask for HERO5/6/7 / Weight Plate or via optional M6 Plate Direct Base III or M5 Plate Direct Base III on a housing or other base products. It is also possible to attach the Direct Base III on the middle of the Stick Arm or Multi Ball Arm via optional M6 Joint. The Direct Base III is attached on a strobe as well. Its ball-joint is made of metal, to provide rigid strobe positioning only by lightly fasten the Clamp III.

€24.90*

Spare battery 3*18650 Li-Ion, 3400mAh

Replacement battery for video lamp Smart Focus 2500, Smart Focus 3500

€79.00*

on stock

Eyedaptor M67-F52

Makes it possible to mount wetlenses and filters with 52mm thread on underwater cameras with 67mm lens thread.. Important Note: Please make sure the accessory lens or filter is compatible with your camera body before purchasing. Note that while almost any wet 52mm threaded lens or filter can be mounted to a 67mm threaded mount with this adapter, some of these optical accessories may not be compatible with your camera or housing for various reasons. .

€29.00*

Connector for Goodman Handle

Mounting plate for Goodman Handle by BigBlue Dive Lights.

€13.90*

on stock

Z Adapter II

The Z Adapter II is an optional product to add INON Arm II compatible ball-joint on a strobe, light holder or base. An arm product is combined in combination with a clamp. Metal body enhances stability of combined arm. It is useful when handling long arm via this accessory as the Z Adapter II attached on the Grip Base D4/M1 will have its ball-joint vertically or horizontally.

€34.90*