for Wetlenses

on stock

M67 to Bayonet Mount Converter II

This Bayonet Mount Converter II is designed for M67 threaded ports to use with Water Contact Optics. This works with 1st generation bayonet mount optics as well as the new 2nd generation (WWL-C).

€100.00*

on stock

Bayonet Mount Adaptor for SMC/CMC

In order to use the CMC/SMC with the Bayonet Mount System this adapter is required. It threads onto the CMC or SMC.

€55.00*

on stock

Neoprene Dome Cover A4

A4 Neoprene Dome Protective Cover for Wet Wide Lenses and Dome Lens Ports UWL-400F Wide Angle Lens (Cat. No. 5140) UWL-400Q Wide Angle Lens (Cat. No. 5142)

€20.00*

on stock

Adapter M52 (female) to M67 (male)

Adapter 52mm (female) to 67mm (male) by Weefine

€20.00*

on stock

Adaptor M52 (Ports) to M67 (Lens/Filter)

Adapter 52mm (male) to 67mm (female) by Weefine

€19.50*

on stock

Bayonet Lens Holder for Inon Float Arms

This adapter mounts to INON arms and provides a secure attachment point for a Bayonet Mount or Bayonet Mount II optic.

€85.00*

on stock

Lens Holder with M52&M67

Vorsatzlinsenhalterung für Linsen sowohl mit M67 als auch mit M52 Schraubgewinde. Diese Halterung lässt sich sowohl an der Klemme PRO als auch der Griffschiene von Weefine festschrauben.

€26.50*

on stock

M67 Lens Holder for Float Arm by Inon

A lens holder attached on a Float Arm/Mega Float Arm/Mega Float Tube or on the "M5 Joint" installed on a Stick Arm/Multi Ball Arm (*1) to carry M67 series/28M67 series attachment lens to help comfortable multiple lens handling underwater. The lens holder is screwed on an arm or M5 Joint through center screw hole. (*1) "Multi Ball Arm SS" is not compatible with the "M5 Joint". "Stick Arm XS-T" and "Multi Ball Arm S" can hold the "M5 Joint" but not compatible with a lens holder.

€29.00*

M67 Makro-Port-Deckel

Diese Hartplastikkappe wird auf 67mm Makro-Ports aufgeschraubt. Mit praktischer Öse zur Befestigung eines Sicherungbandes!

€25.00*

M67 Double Flip Holder for M67 Ports

This dual flip holder allows for use of two M67 wet-mate optics like the SMC-1 or CMC-1 on M67 Macro Ports. Only one lens can be flipped-down at a time and is securely held in place by the bottom clip.

€475.00*

M67 Flip Holder for M67 Ports

This flip holder allows for use of one M67 wet-mate optic like the SMC-1 or CMC-1 on M67 Macro Ports.

€285.00*

on stock

Lens Shade for CMC and SMC

Lens shade for CMC-1, CMC-2 and SMC- 1 from Nauticam

€25.00*

on stock

FC-01 Float Collar for Wide Angle Lenses

Compatibility / Total Weight Underwater: UWL-09: 60 grams / 2.1 oz Positively Buoyant UWL-09PRO: 270 grams / 9.5 oz Negatively Buoyant

€42.00*

on stock

Neoprene Cover for WWL-C

Nauticam's WWL-C wide-angle attachment lens is protected on land by a sturdy hard plastic hood. In the water it can be difficult to store this safely. Therefore, a neoprene protector is now available that reliably protects the lens of the WWL-C.

€30.00*

Front Cover 110

A cover to protect front dome lens of INON Z-330 / D-200 strobe. Designed to fit to the strobe with “Strobe Light Shade” being attached. Usable underwater as the cover is made of neoprene as same as wetsuits. Also usable for an INON wide lens attached with a lens hood.

€28.00*

on stock

Snap-on Lens Cap (M67)

The Snap-on Lens Cap M67 is a plastic lens cap for close-up lenses and digital SLR housing lens ports to protect front optical element. Spring loaded center tabs provide easy installation and removal only by squeezing the tabs. Packaged lanyard to avoid loss of the lens cap when not being attached on a lens/port.

€19.00*

on stock

Eyedaptor M67-F52

Makes it possible to mount wetlenses and filters with 52mm thread on underwater cameras with 67mm lens thread.. Important Note: Please make sure the accessory lens or filter is compatible with your camera body before purchasing. Note that while almost any wet 52mm threaded lens or filter can be mounted to a 67mm threaded mount with this adapter, some of these optical accessories may not be compatible with your camera or housing for various reasons. .

€29.00*

on stock

Hard Cap for WWL-1B

This is a replacement hard cap for the front of the WWL-1B.

€110.00*

on stock

Lens Holder for Smart Housing

Attachment lens holder with M67 thread for the Smart Housing from Weefine

€62.00*

Magnetic lens holder (M67)

Set of male and female magnetic holder for attachment lenses with M67 screw thread.

€146.00*

AD Lens Holder for Float Arm

A attachment lens holder attached to a float arm or to the "M5 joint" installed on the rod arm/multi-ball arm (*1) to hold the AD series/28AD series attachment lens and facilitate comfortable handling of multiple lenses underwater. The lens holder is screwed onto an arm or the M5 joint through the centre screwöhole. . It can also be used to accommodate SD Mount series attachment lenses for GoPro®. (*1) "Multi Ball Arm SS" is not compatible with the "M5 joint". The "Stick Arm XS-T" and the "Multi Ball Arm S" can hold the "M5 joint" but are not compatible with a lens holder. .

€19.00*

on stock

Neoprene Cover for WWL-1B

The WWL-1B wide-angle attachment lens from Nauticam is protected on land by a sturdy hard plastic cap. In the water, it can be difficult to stow this safely. That's why this now comes with a neoprene protector that reliably protects the glass of the WWL-1B.

€37.00*

on stock

Adjustable Lanyard with Hook for WWL-C

Secure your wet lens WWL-C from Nauticam with a snap hook on your handle rail or your BCD

€30.00*

on stock

Bayonet Mount II Lens Holder for Arm

This adapter mounts to standard arms and provides a secure attachment point for a Bayonet Mount or Bayonet Mount II optic.

€85.00*