Large buoyancy double ball arm with 1 inch ball head connection. Diameter 7 cm Length 20 cm Buoyancy 340 g Made from CNC machined aluminium and then anodised black sea water resistant.

Large buoyancy double ball arm with 1-inch ball head connection Diameter 5 cm Length 20 cm Buoyancy 150 g Made from CNC machined aluminium and then anodised black sea water resistant.

Great buoyancy The Float Arm uses weather-resistant ABS material for its component arm body to lighten total weight creating extraordinary buoyancy comparing to existing solid arm type float system together with its hollow arm body design. The hollow arm body enables not only helping weight trimming but also provide extra buoyancy. Wide variety of Float Arm Float Arm system have line-up total 5 different type; [Float Arm] of standard φ50mm / 2in with three different length and [Mega Float Arm] of 95mm / 3.8in with two different length. New INON Float Arm system including existing [Arm Float S]provides perfect solution to benefit desired underwater weight of your camera system depending on shooting style, conditions. Secure and stable gripping The Float Arm is fully compatible with existing INON Arm II system with its high-precision machined aluminum alloy ball joint providing perfect balance between stable clamping and stress-free handling thanks to ozone-proof and weather-proof silicon rubber O-ring. Your INON Arm II system is fully compatible with new Float Arm. Inon float arm with attachment lens holder (optional) Inon float arm with hot shoe mount (optional)

Double ball head arm, 22.5 cm length. The ball head diameter is 25 mm (1 inch).  All products are made from CNC machined aluminium and are then anodised black to be seawater resistant. The arm length to choose depends on the type of photography you want to do. If you only do macro, then you want a small, compact arm. If you're only doing wide angle, then you want your flashes away from the camera to reduce the floaters you get when the flashes light up the water in front of your subject. If you want to do both types of photography, then there will be a need to implement the length that will allow for wide angle photography and not get in the way of macro photography.

Large buoyancy double ball arm with 1 inch ball head connection. Diameter 7 cm Length 25 cm Buoyancy 465 g Made from CNC machined aluminium and then anodised black sea water resistant.

Large buoyancy double ball arm with 1-inch ball head connection Diameter 5 cm Length 25 cm Buoyancy 210 g Made from CNC machined aluminium and then anodised black sea water resistant.

Great buoyancy The Float Arm uses weather-resistant ABS material for its component arm body to lighten total weight creating extraordinary buoyancy comparing to existing solid arm type float system together with its hollow arm body design. The hollow arm body enables not only helping weight trimming but also provide extra buoyancy. Wide variety of Float Arm Float Arm system have line-up total 5 different type; [Float Arm] of standard φ50mm / 2in with three different length and [Mega Float Arm] of 95mm / 3.8in with two different length. New INON Float Arm system including existing [Arm Float S]provides perfect solution to benefit desired underwater weight of your camera system depending on shooting style, conditions. Secure and stable gripping The Float Arm is fully compatible with existing INON Arm II system with its high-precision machined aluminum alloy ball joint providing perfect balance between stable clamping and stress-free handling thanks to ozone-proof and weather-proof silicon rubber O-ring. Your INON Arm II system is fully compatible with new Float Arm. Inon float arm with attachment lens holder (optional) Inon float arm with hot shoe mount (optional)

Double ball head arm, 30 cm length. The ball head diameter is 25 mm (1 inch).  All products are made from CNC machined aluminium and are then anodised black to be seawater resistant. The arm length to choose depends on the type of photography you want to do. If you only do macros, then you want a small, compact arm. If you're only doing wide angle, then you want your flashes away from the camera to reduce the floaters you get when the flashes light up the water in front of your subject. If you want to do both types of photography, then there will be a need to implement the length that will allow for wide angle photography and not get in the way of macro photography. 

Great buoyancy The Float Arm uses weather-resistant ABS material for its component arm body to lighten total weight creating extraordinary buoyancy comparing to existing solid arm type float system together with its hollow arm body design. The hollow arm body enables not only helping weight trimming but also provide extra buoyancy. Wide variety of Float Arm Float Arm system have line-up total 5 different type; [Float Arm] of standard φ50mm / 2in with three different length and [Mega Float Arm] of 95mm / 3.8in with two different length. New INON Float Arm system including existing [Arm Float S]provides perfect solution to benefit desired underwater weight of your camera system depending on shooting style, conditions. Secure and stable gripping The Float Arm is fully compatible with existing INON Arm II system with its high-precision machined aluminum alloy ball joint providing perfect balance between stable clamping and stress-free handling thanks to ozone-proof and weather-proof silicon rubber O-ring. Your INON Arm II system is fully compatible with new Float Arm. Inon float arm with attachment lens holder (optional) Inon float arm with hot shoe mount (optional)  

200mm aluminum arm with standard 1" ball mounts on either end. The Nauticam Light Mounting System features a complete array of industry standard 1" ball mount arms, clamps, floats and accessories for attaching a variety of lighting solutions to your housing.

The Nauticam Carbon Fiber Float Arms series are manufactured from a high quality carbon fiber tubing with molded plastic end caps and machined aluminum balls. O-Ring seals ensure water tight integrity and each arm includes an aluminum spine that ties the entire assembly together, making the arm stronger than one machined from solid aluminum alone. This robust design is why we are able to guarantee these arms' watertightness for life! Carbon fiber doesn't just look cool. It is five times as strong as steel, yet weighs about two-thirds less. Lighter weight means more net buoyancy for the same volume.  NAUTICAM CARBON FIBER FLOAT ARM SYSTEM One approach that some underwater photographers have taken to lighten the load underwater is through the use of floats made of a special type of foam that compresses less than conventional foam. While this can be a useful option, foam does have its drawbacks. Typical "incompressible" foam blocks begin to noticeably compress at 100' and by 200' have completely lost effectiveness, and have begun to permanently deform. Foam can also break down over time and make something of a mess. Nauticam Carbon Fiber arms do not measurably compress even at 100 meters/330 feet, and look more streamlined than chunky foam blocks. Carbon fiber doesn't just look cool. It is five times as strong as steel, yet weighs about two-thirds less. Lighter weight means more net buoyancy for the same volume.  The Nauticam system of arms, clamps, trays and other mounting hardware allows a huge range of possibilities for arranging lighting.  DIALING IN YOUR BUOYANCY With a variety of lengths and widths, the Nauticam carbon fiber float arm system lets you dial in the buoyancy you want.  Each arm has a clearly rated net buoyancy (lift) and with the wide selection of attachment options, it's finally possible to get your rig perfectly balanced for your shooting style.   

Tube of 50mm diameter with 25mm balls.

The Nauticam Carbon Fiber Float Arms series are manufactured from a high quality carbon fiber tubing with molded plastic end caps and machined aluminum balls. O-Ring seals ensure water tight integrity and each arm includes an aluminum spine that ties the entire assembly together, making the arm stronger than one machined from solid aluminum alone. This robust design is why we are able to guarantee these arms' watertightness for life!Carbon fiber doesn't just look cool. It is five times as strong as steel, yet weighs about two-thirds less. Lighter weight means more net buoyancy for the same volume.  NAUTICAM CARBON FIBER FLOAT ARM SYSTEM One approach that some underwater photographers have taken to lighten the load underwater is through the use of floats made of a special type of foam that compresses less than conventional foam. While this can be a useful option, foam does have its drawbacks. Typical "incompressible" foam blocks begin to noticeably compress at 100' and by 200' have completely lost effectiveness, and have begun to permanently deform. Foam can also break down over time and make something of a mess. Nauticam Carbon Fiber arms do not measurably compress even at 100 meters/330 feet, and look more streamlined than chunky foam blocks.Carbon fiber doesn't just look cool. It is five times as strong as steel, yet weighs about two-thirds less. Lighter weight means more net buoyancy for the same volume.  The Nauticam system of arms, clamps, trays and other mounting hardware allows a huge range of possibilities for arranging lighting.  DIALING IN YOUR BUOYANCY With a variety of lengths and widths, the Nauticam carbon fiber float arm system lets you dial in the buoyancy you want.  Each arm has a clearly rated net buoyancy (lift) and with the wide selection of attachment options, it's finally possible to get your rig perfectly balanced for your shooting style.   

Double ball arm, 7.5 cm long. The ball head diameter is 25 mm (1 inch).  All products are made from CNC machined aluminium and are then anodised black to be seawater resistant. The arm length to choose depends on the type of photography you want to do. If you only do macros, then you want a small, compact arm. If you're only doing wide angle, then you want your flashes away from the camera to reduce the floaters you get when the flashes light up the water in front of your subject. If you want to do both types of photography, then there will be a need to implement the length that will allow for wide angle photography and not get in the way of macro photography. 

Large buoyancy double ball arm with 1-inch ball head connection Diameter 5 cm Length 30 cm Buoyancy 260 g Made from CNC machined aluminium and then anodised black sea water resistant.

The Nauticam Carbon Fiber Aluminum Buoyancy Arm Series is made from a high quality carbon fiber tube with molded plastic end caps and machined aluminum balls. Each arm includes an aluminum backer that connects the entire assembly together, making the arm stronger than one made from solid aluminum alone. This sturdy construction allows these arms to be waterproof for a long time! Nauticam Carbon Fiber Buoyancy Arm System One approach that some underwater photographers have taken to reduce downforce is to use buoyancy arms made of a special type of foam that compresses less than conventional foam. While this can be a useful option, foam has its drawbacks. Typical "incompressible" foam bladders begin to compress noticeably at 30 m diving depth and by 60 m have lost völl effectiveness and begin to deform permanently. Foam can also degrade over time. Nauticam carbon fiber arms do not compress measurably, even at 100 meters, and appear more streamlined than chunky foam bladders.  Carbon fiber doesn't just look cool, though. It is five times as strong as steel, yet weighs about two-thirds less. Lighter means more net lift for the same volume. In the 60 mm diameter class, for example, the Nauticam arm offers 50% more buoyancy than other competing aluminum tube arms. The 90 mm diameter arms are perfect for systems that require even more buoyancy. The Nauticam system of arms, clamps, trays and other mounting hardware offers a variety of lighting arrangement options. The additional carbon fiber arms allow the underwater shooter even more flexibility in dialing in the rig he or she wants.

The Nauticam Carbon Fiber Float Arms series are manufactured from a high quality carbon fiber tubing with molded plastic end caps and machined aluminum balls. O-Ring seals ensure water tight integrity and each arm includes an aluminum spine that ties the entire assembly together, making the arm stronger than one machined from solid aluminum alone. This robust design is why we are able to guarantee these arms' watertightness for life! Carbon fiber doesn't just look cool. It is five times as strong as steel, yet weighs about two-thirds less. Lighter weight means more net buoyancy for the same volume.  NAUTICAM CARBON FIBER FLOAT ARM SYSTEM One approach that some underwater photographers have taken to lighten the load underwater is through the use of floats made of a special type of foam that compresses less than conventional foam. While this can be a useful option, foam does have its drawbacks. Typical "incompressible" foam blocks begin to noticeably compress at 100' and by 200' have completely lost effectiveness, and have begun to permanently deform. Foam can also break down over time and make something of a mess. Nauticam Carbon Fiber arms do not measurably compress even at 100 meters/330 feet, and look more streamlined than chunky foam blocks. Carbon fiber doesn't just look cool. It is five times as strong as steel, yet weighs about two-thirds less. Lighter weight means more net buoyancy for the same volume.  The Nauticam system of arms, clamps, trays and other mounting hardware allows a huge range of possibilities for arranging lighting.  DIALING IN YOUR BUOYANCY With a variety of lengths and widths, the Nauticam carbon fiber float arm system lets you dial in the buoyancy you want.  Each arm has a clearly rated net buoyancy (lift) and with the wide selection of attachment options, it's finally possible to get your rig perfectly balanced for your shooting style.  

Large buoyancy double ball arm with 1 inch ball head connection. Diameter 7 cm Length 30 cm Buoyancy 600 g Made from CNC machined aluminium and then anodised black sea water resistant.

100mm aluminum arm with standard 1" ball mounts on either end. The Nauticam Light Mounting System features a complete array of industry standard 1" ball mount arms, clamps, floats and accessories for attaching a variety of lighting solutions to your housing.

A 125mm aluminum arm with standard 1" ball mounts on either end. The Nauticam Light Mounting System features a complete array of industry standard 1" ball mount arms, clamps, floats and accessories for attaching a variety of lighting solutions to your housing.

300mm aluminum arm with standard 1" ball mounts on either end. The Nauticam Light Mounting System features a complete array of industry standard 1" ball mount arms, clamps, floats and accessories for attaching a variety of lighting solutions to your housing.

75mm aluminum arm with standard 1" ball mounts on either end. The Nauticam Light Mounting System features a complete array of industry standard 1" ball mount arms, clamps, floats and accessories for attaching a variety of lighting solutions to your housing.

Isotta float arms are made of robust aluminium and have 1-inch ball heads with an O-ring for good stability.

The Nauticam Carbon Fiber Float Arms series are manufactured from a high quality carbon fiber tubing with molded plastic end caps and machined aluminum balls. O-Ring seals ensure water tight integrity and each arm includes an aluminum spine that ties the entire assembly together, making the arm stronger than one machined from solid aluminum alone. This robust design is why we are able to guarantee these arms' watertightness for life! Carbon fiber doesn't just look cool. It is five times as strong as steel, yet weighs about two-thirds less. Lighter weight means more net buoyancy for the same volume.  NAUTICAM CARBON FIBER FLOAT ARM SYSTEM One approach that some underwater photographers have taken to lighten the load underwater is through the use of floats made of a special type of foam that compresses less than conventional foam. While this can be a useful option, foam does have its drawbacks. Typical "incompressible" foam blocks begin to noticeably compress at 100' and by 200' have completely lost effectiveness, and have begun to permanently deform. Foam can also break down over time and make something of a mess. Nauticam Carbon Fiber arms do not measurably compress even at 100 meters/330 feet, and look more streamlined than chunky foam blocks. Carbon fiber doesn't just look cool. It is five times as strong as steel, yet weighs about two-thirds less. Lighter weight means more net buoyancy for the same volume.  The Nauticam system of arms, clamps, trays and other mounting hardware allows a huge range of possibilities for arranging lighting.  DIALING IN YOUR BUOYANCY With a variety of lengths and widths, the Nauticam carbon fiber float arm system lets you dial in the buoyancy you want.  Each arm has a clearly rated net buoyancy (lift) and with the wide selection of attachment options, it's finally possible to get your rig perfectly balanced for your shooting style.