Ball Mounts

on stock

GoPro Mount with 1″ Ball head

This GoPro® camera mount with 1″ ball allows for easy attachment to a Bigblue light using a Clip-02 (sold separately).

€29.90*

Strobe mounting ball for cold shoe

Standard 1" ball mount that attaches to the cold-shoe mount of compatible housings. Specially designed metal plate prevents the ball mount from slipping off even if it becomes slightly loose.

€48.00*

on stock

YS-Ballhead-Adaptor (6cm)

The Bigblue accessories series employs the latest designs that cater to different photographic and video systems. Utilizing the best possible materials on the market, such as T6061 aluminum.

€22.00*

on stock

SA8 Strobe Head S

Used to mount a YS series strobe.

€29.95*

M5 Strobe Mounting Ball for Housing

Strobe mounting ball that attaches to M5 threaded mount on select housings. Installation Guide: Nauticam M5 & M10 Strobe Mounting Balls from Nauticam on Vimeo.

€27.00*

on stock

Z Adapter MV

An adapter to attach S220/Z-330/D-200/S-2000/Z-240/D-2000 strobe or Double Light Holder LE/Strobe Light Holder LE on an arm body or Direct Base III etc. via clamp. The ball-joint is made from plastic to provide flexible strobe positioning without loosening a clamp to provide comfortable strobe aiming.

€24.90*

on stock

Ball head with YS mounting plate

Universal ball with a 8mm diameter hole that allows to easily attach different underwater strobes (sea&sea and similar) to to strobe arms and other devices. It is made of anticorodal aluminum and anodized with 40 microns (military standard) to ensure the maximum durability and excellent resistance to wear and to sea salt. An o-ring placed at the center of the ball acts like a clutch: the ball tightened by the clamp can be loosened so as to move the arm in the water without having to re-tighten it.

€20.00*

on stock

Ball head with M6 Screw

1-inch ball head adapter with M6 threaded screw

€28.00*

on stock

Ball head with M8 Screw

Ball joint of diam. 25mm threaded M8 with locking system.

€28.00*

on stock

M10 Strobe Mounting Ball for Housing

Provides an additional ball mount for housings with available M10 threaded mount. Installation Guide: Nauticam M5 & M10 Strobe Mounting Balls from Nauticam on Vimeo.

€40.00*

Kugelkopf mit Edelstahlschraube (M6)

1-Zoll-Kugelkopf mit Edelstahlschraube mit M6-Gewinde. Gefertigt aus salzwasserbeständigen Aluminium, mit 40 Mikron eloxiert (Militärstandard), um maximale Haltbarkeit und ausgezeichnete Beständigkeit gegen Verschleiß und Meersalz zu gewährleisten. Der Kugelkopf kann leicht an verschiedene Halterungen, Blitze, Lichter usw. angepasst werden.

€20.00*

on stock

Hot Shoe Ball Base

With these 1-inch ball head mounts, you can attach the matching strobes and lamps directly to the hot shoe of your underwater housing.

€37.00*

on stock

Z Joint by INON

A joint adapter to attach Z-330/D-200/S-2000/Z-240/D-2000 strobe on YS type arm head including Grip Base D4/Grip Base M1/D Holder/Shoe Base II/YS Adapter MV/YS Arm/Direct Base YS RT etc. Also usable to attach an LED flashlight product on YS type arm head in combination with Double Light Holder LE/Quad Light Holder LE/Strobe Light Holder LE/Strobe Light Holder LF. Compatible strobe/light etc. Z-330, D-200, S-2000, Z-240, D-2000, D-2000S, D-2000W/Wn, D-180 (*1), D-180S, Z-220 (*1), Z-220F, Z-220S (*1), Strobe Light Holder LE, Double Light Holder LE, Quad Light Holder LE, Strobe Light Holder LF, SD Front Mask for HERO5/6/7, SD Front Mask STD, SD Mount Cage for HERO3/3+/4, SD Mount Base for TG-Tracker, SD Mount Base UWH1 Compatible base/arm etc. Shoe Base II, YS Adapter MV, Double YS Adapter MV, YS Adapter WB MV, YS Adapter, YS Arm M ,YS Arm MS ,Bar Mount, Grip Base D4, Grip Base M1, D Holder, D Holder Extension Bar, Port Arm for MRS, Port Arm for UFL-MR130 EFS60, Direct Base YS RT, Direct Base YS

€24.00*

Ball Joint adaptor (90° angle)

Ball joint of 25mm with 90° angle mount.

€37.00*

on stock

Coldshoe Gopro Adaptor

Easily attach your GoPro to the hot shoe of your underwater housing.

€29.00*

Ballhead with GoPro adapter

Ball with GoPro adapter tripod. It is made out of anticorodal aluminum and anodized 40 microns to ensure the maximum durability and excellent resistance to wear and to sea salt. This special ball allows to mount the GoProcamera to all Carbonarm systems such as polecams, grips, arms, clamps, etc. ... An o-ring at the center of the ball is placed to provide optimal flexibility.

€29.00*

on stock

Ball Joint 45° angle for T-Socket

Ball joint of 25mm with 45° front angle mount.

€42.50*

on stock

Direct Base III

The Direct Base III is a fundamental part to attach arm system. Directly attached on the Grip Base D4 / Grip Base M1 / D Holder / SD Front Mask for HERO5/6/7 / Weight Plate or via optional M6 Plate Direct Base III or M5 Plate Direct Base III on a housing or other base products. It is also possible to attach the Direct Base III on the middle of the Stick Arm or Multi Ball Arm via optional M6 Joint. The Direct Base III is attached on a strobe as well. Its ball-joint is made of metal, to provide rigid strobe positioning only by lightly fasten the Clamp III.

€24.90*

Mounting Ball Set for Tripod

This kit allows for the secure mounting of industry standard 1" ball mounts directly onto the NA-A9 housing that provides a low-profile attachment point for tripod legs or accessory light arms.

€77.00*

on stock

Z Adapter II

The Z Adapter II is an optional product to add INON Arm II compatible ball-joint on a strobe, light holder or base. An arm product is combined in combination with a clamp. Metal body enhances stability of combined arm. It is useful when handling long arm via this accessory as the Z Adapter II attached on the Grip Base D4/M1 will have its ball-joint vertically or horizontally.

€34.90*

1/4" thread male adapter

The Bigblue accessories series employs the latest designs that cater to different photographic and video systems. Utilizing the best possible materials on the market, such as T6061 aluminum. 1″ ball 2.5″ overall height

€21.00*

Hot Shoe Ball

Ball, composed of a ball SF/MC with a diameter 25 mm and a flat contact flash adapter threaded M6, both made out of anticorodal aluminum and anodized 40 microns to ensure the maximum durability and excellent resistance to wear and to sea salt. This ball is very useful to mount many accessories directly on housing's hot shoe.

€29.00*

on stock

Housing Mounting Ball with 1/4'' Screws

This standard 1" mounting ball is designed to work with housings that feature the 1/4-20 threaded mounting locations such as the NA-E2 and NA-BMPCC6K. NOTE: please confirm the housing you wish to use with this ball mount features the 1/4-20 threading before purchase.

€43.00*

on stock

Strobe Mounting Ball for Easitray & Flexitray

A standard 1" ball mount for Easi/Flexitray handles.

€20.00*