Filter
available
Auftriebsringe (150 g Auftrieb)
Dieser Ring besteht aus geschlossenzelligem, hochdichtem Polyurethanschaum, der bis zu -100 m nicht komprimierbar ist und einen Auftrieb von ca. 150 g bietet. Er hat eine zentrale Bohrung mit 25 mm Durchmesser, die für die meisten auf dem Markt erhältlichen Aluminiumarme geeignet ist.

€19.00*
available
Float Belt FB10 by Stixx
Large circular buoyancy belt/circular flotation belt for straight lens ports for underwater housings with a diameter of 4 inches (100 mm), including Nauticam. The 10 segments of the belt can be adjusted to provide up to one kilogram of buoyancy. Travel weight: 122 grams.

€65.00*
available
Float ring (125 g buoyancy)
Floating ring made of closed cell high density polyurethane foam, uncompressible until -250 m and provides a buoyancy of about 125 g . It has a central hole Ø25 suitable for most arms available on the market.

€19.00*
available
Auftriebsringe KIT ? 4 Ringe (500 g Auftrieb)
Dieser Bausatz besteht aus 4 Auftriebsringen. Jeder Ring besteht aus geschlossenzelligem, hochdichtem Polyurethanschaum, der bis zu -250 m nicht komprimierbar ist und einen Auftrieb von ca. 125 g bietet. Er hat eine zentrale Bohrung mit 25 mm Durchmesser, die für die meisten auf dem Markt erhältlichen Aluminiumarme geeignet ist.

€69.00*
available
Float Tube + 565 g (220 mm, Ø 70 mm)
The floating tube system allows to expand on 25mm diameter float arms, adding buoyancy to your system when you make changes to its weight. The fastening system closes the sealed chamber and keeps the float tube in a steady position.

€145.00*
available
Floating Rings Kit 600 g
This kit consists of 4 floating rings.  Each ring is made of closed cell high density polyurethane foam, uncompressible until -100 mt and provides a buoyancy of about 150 g . It has a central hole Ø25 suitable for most arms available on the market.

€69.00*
available
Mega Float Tube S
Exclusively designed for Carbon Telescopic Arm to generate extraordinary buoyancy underwater with weather resistant ABS material which carries lower specific gravity, and hollow design. Maximum two Mega Float Tubes can be attached on both ends of the Carbon Telescopic Arm. The Float Tube is designed to screw on Carbon Telescopic Arm and fixed with the dedicated lock ring. The Float Tube can hold a Lens Holder for Float Arm or a Shoe Base Spacer on its side. Attaching a Mega Float Tube on the side without grip of the Carbon Telescopic Arm won’t have minimum extension.

€77.00*
Float Belt FB12 by StiX
Large circular buoyancy belt. Large circular buoyancy belt for straight lens mounts for underwater housings with a slightly larger diameter of 4.8 inches (120 mm), including Nauticam. The 12 segments of the belt can be adjusted to provide up to one kilogram of buoyancy. Travel weight: 190 grams.

€69.00*
available
Float board
This float board is made of closed-cell, high-density polyurethane foam that is incompressible up to -250 m and provides a buoyancy of approx. 2.3 kg. 

€89.00*
available
Mega Float Tube M
Exclusively designed for Carbon Telescopic Arm to generate extraordinary buoyancy underwater with weather resistant ABS material which carries lower specific gravity, and hollow design. Maximum two Mega Float Tubes can be attached on both ends of the Carbon Telescopic Arm. The Float Tube is designed to screw on Carbon Telescopic Arm and fixed with the dedicated lock ring. The Float Tube can hold a Lens Holder for Float Arm or a Shoe Base Spacer on its side. Attaching a Mega Float Tube on the side without grip of the Carbon Telescopic Arm won’t have minimum extension.

€95.00*
Buoyancy Collar for MWL-1
The Nauticam WWL-1 wide wet lens has an equivalent weight underwater of 0.62kg. With the buoyancy collar mounted, the equivalent weight is reduced to 160g / 5.6 ounce. The WWL-1 is supplied with a neoprene dome cover. The neoprene cover cannot be used satisfactorily on the WWL-1 when the buoyancy collar is installed. The Nauticam Hard Cap for WWL-1 may be used with, or without, the buoyancy collar installed.

€395.00*
Buoyancy Collar for WWL-1
The Nauticam WWL-1 wide wet lens has an equivalent weight underwater of 0.62kg. With the buoyancy collar mounted, the equivalent weight is reduced to 160g / 5.6 ounce. The WWL-1 is supplied with a neoprene dome cover. The neoprene cover cannot be used satisfactorily on the WWL-1 when the buoyancy collar is installed. The Nauticam Hard Cap for WWL-1 may be used with, or without, the buoyancy collar installed.

€65.00*
Float Tube +155 g (80 mm, Ø 70 mm)
The floating tube system allows to expand on 25mm diameter float arms, adding buoyancy to your system when you make changes to its weight. The fastening system closes the sealed chamber and keeps the float tube in a steady position.

€115.00*
Float Tube +265 g (120 mm, Ø 70 mm)
The floating tube system allows to expand on 25mm diameter float arms, adding buoyancy to your system when you make changes to its weight. The fastening system closes the sealed chamber and keeps the float tube in a steady position.

€125.00*
Float Tube +355 g (150 mm, Ø 70 mm)
The floating tube system allows to expand on 25mm diameter float arms, adding buoyancy to your system when you make changes to its weight. The fastening system closes the sealed chamber and keeps the float tube in a steady position.

€135.00*
Float Tube +455 g (180 mm, Ø 70 mm)
The floating tube system allows to expand on 25mm diameter float arms, adding buoyancy to your system when you make changes to its weight. The fastening system closes the sealed chamber and keeps the float tube in a steady position.

€140.00*