Sale in the name of Klaus Vanderheyden GmbH i.L. A professional grade, compact waterproof housing for Olympus OM-D E-M10 Mark III mirrorless micro four-thirds cameras. Perfect for any application in or around the water from scuba to surf to pool. This housing requires the addition of a compatible DLM Lens Port for waterproof operation. Lens Port not included. The Olympus OM-D E-M10 Mark III is a powerful compact interchangeable lens camera. Customizable controls, a TTL flash hotshoe, and a titling LCD screen make it a good choice for underwater use. The E-M10 Mark III features a 16MP CMOS sensor, 4K/UHD video at 24p and 30p, and a 121-point contrast-detect AF system. True TTL exposure Proper strobe exposure is the #1 most important contributor to sharp and colorful underwater photos, particularly below 30ft/10m. This is the only housing to include an integrated TTL circuit fine-tuned to the Olympus O-MD E-M10 Mark III flash exposure protocol for the fastest and most accurate exposure possible. TTL communication by electrical sync cord improves camera battery life and recycle time, meaning you get many times more strobe-lit shots when you need them.  The TTL circuit is powered by the strobe for zero maintenance and no batteries to change. Exposure compensation in TTL mode is supported using the camera's built-in control. At this time, only Ikelite DS strobes are capable of powering the TTL circuitry. Non-Ikelite strobes featuring an electrical bulkhead may be attached by sync cord but must be used in manual exposure modes only. Built-in Flash The camera's built-in flash may be used to trigger external fiber optic strobes. Two fiber optic ports are provided on the top of the housing for attachment of compatible fiber optic cords (see compatibility information below). The built-in flash is not suitable for lighting a subject underwater.  Constant-On Lighting A bright constant-on video light can be used instead of or in addition to a flash. A constant-on light is not as bright as a strobe flash. Constant-on lights do provide added versatility because they can be used for focus assist and for improved colors when shooting video. Light is absorbed as it travels through even short distances underwater, making colors appear dull or monochromatic. To preserve the natural colors of your subject, it's important to stay within arm's reach—no more than 3-4 feet (1m) away. There is a simple rule that brighter is better underwater. A high-quality lighting system can produce magazine quality results with almost any camera system. Extensive Lens Support High quality yet affordable optics are available for an extensive range of micro four-thirds lenses from wide angle fisheye to macro.  The DLM port system is designed to be tough enough for heavy surf and without complex mechanisms for supreme reliability in remote locations. Our custom optical grade acrylic domes provide the color, clarity, and durability of glass at a fraction of the travel weight and cost. Glass flat ports are available for macro lenses. Lens port sold separately. A compatible lens port is required for waterproof use. Controls and Ergonomics A trigger-type shutter lever control is designed for optimal sensitivity and a natural motion when shooting underwater. The standard control hugs the side of the housing for comfortable use when hand holding. The AEL/AFL button is accessed by a lever for convenient access to customizable functions. Try using back button focus via the AFL button for shooting small or fast moving subjects. Both shutter and AEL/AFL / Fn1 levers can be easily extended using the optional Shutter Trigger Extension # 4077.95 for more comfortable reach when using a handle grip.  Soft-touch knobs are easy to grip with or without gloves on and provide quick access to important controls including front and rear dials and the mode control.  Hard anodized aluminum push buttons are extremely lightweight and resistant to salt build-up and corrosion. The video record start/stop button is bright red anodized to stand out so that you never miss the action. The back of the housing features laser engraved control symbols which will never fade or fall off. Camera Installation The camera mount is front-loading for easy installation and removal. A small mounting plate attaches to the bottom of the camera and secures in the front of the housing. The camera mounting plate does not need to be removed from the camera for surface use or when changing the battery or memory cards. The mounting plate features a 1/4-20 threaded mount on the bottom so that it can be attached to a tripod on the surface. Viewfinders The included Supereye Viewfinder provides an enhanced view of the camera's optical viewfinder when viewed through a dive mask. Get the brightest and sharpest view of the camera's OLED EVF by adding an optional Magnified Viewfinder. The Supereye removes quickly and easily for the attachment of an Straight Magnified Viewfinder # 6890 or 45° Magnified Viewfinder (Type 1) # 6891.1. The camera's large, super-bright LCD screen is viewable through the back of the housing and can be tilted prior to installation in the housing for a a better view underwater. Accessory Mounting Two 1/4-20 threaded mounting points are included on the bottom of the housing for the attachment of a tray and handle grips. Handles provide improved ergonomics underwater and are the foundation for your lighting mounts. If you're shooting with two strobe or lighting arms, then a top handle can be added to carry to and from the dive site. Top handles are available in a Cable Grip # 4080.07 or Aluminum Top Handle # 4080.08. The rigid aluminum version provides additional mounting points for lighting and accessories. Sealing and Testing  There is no greater assurance than being able to see your camera and o-ring seal through the back of the housing. Our signature open-groove design suspends the rear o-ring in a natural position that is easier to maintain and more reliable than forcing the o-ring into a channel. Once the housing is closed you can see the o-ring form a solid, waterproof seal. A spare 1/2-20 threaded accessory port is provided on the side of the housing for easily installation of the optional Vacuum Kit # 47012. A hand pump with gauge allows you to draw a vacuum on the housing to simulate water pressure and check for leaks prior to entering the water. Every unit is water pressure tested to 200 feet (60m) before it leaves our facility in Indianapolis. Durability and Corrosion Free Performance A custom ABS-PC blend housing provides strength and performance year after year with minimal maintenance. The ABS-PC material is fundamentally corrosion-proof and considerably lighter than aluminum. The specially formulated color deflects the sun to keep your camera running cooler, longer. Compared to black or clear housings, the light color provides superior contrast for enhanced view of the camera, LCD screen, and o-ring seal.  Made in USA Ikelite products are designed, built and tested in the USA. We use locally sourced, top-grade materials. Our housings are built by hand and individually tested for fit and function. We back our products with over 50 years of experience and the best reputation for service within the dive Industry. Compatibility Differences in lens and control placement prevent the older Olympus O-MD E-M10 Mark I or II cameras from being used in this housing. The E-M10 Mark III camera is not compatible in any other Ikelite housing models.

Die Olympus OM-D E-M5 Mark III Kamera Mit einem Gewicht von unter einem Pfund hat die E-M5 Mark III einen großen Auftritt. Die E-M5 Mark III ist mit dem gleichen 20 Megapixel Live MOS Sensor und Dual F.A.S.T. Autofokus System ausgestattet wie die größere OM-D E-M1 Mark II. Neu bei der Mark III ist ein 121-Punkt-Hybrid-AF-System, das in Kombination mit dem leistungsstarken TruePic VIII-Prozessor die Aufnahme von 10 Bildern pro Sekunde im Serienbildmodus mit AF-C ermöglicht. Der EVF der Mark III wurde auf ein OLED-Display mit einer Bildwiederholrate von 60fps aufgerüstet. Die 5-Achsen-Körperstabilisierung wurde um 0,5 Blendenstufen auf 5,5EV verbessert. Die E-M5 Mark III bietet auch in der Videokategorie DCI 4K mit 24p oder stabilisiertes UHD 4K mit 30p, wobei die volle Breite des Sensors genutzt wird, um den Bildausschnitt zu erhalten. Der HDMI-Ausgang unterstützt den 1.4-Standard mit 8-Bit 4:2:2 bei einer Qualität von bis zu 30p. Wichtigste Kamera-Spezifikationen 20MP Live MOS Four Thirds Sensor 121-Punkt-Hybrid-AF-System 10 fps Serienbildaufnahme mit AF-C DCI 4K/24p und UHD 4K/30p Video HDMI-Ausgang 5,5EV Bildstabilisierung (CIPA-Rating) 2,36M-Punkt OLED EVF Mit der OM-D E-M5 Mark III bringt Olympus eine Vielzahl von Funktionen seiner Four Thirds-Flaggschiff-Modelle in ein kostengünstiges und kompaktes Paket, das sich ideal für den reisenden Bildermacher eignet. Das Nauticam Unterwassergehäuse für die OM-5 und Olympus OM-D E-M5 Mark III Die Olympus OM-D E-M5 Mark III platziert die Leistung ihres Vorgängers, der E-M1 Mark II in einem kompakten, reisefreundlichen Paket. Ebenso macht es auch das Unterwassegehäuse NA-EM5III von Nauticam: Das NA-EM5III baut auf eine starken Palette an spiegellosen Kameragehäusen auf und ist ein funktionsreiches Unterwassersystem. DieMission Control-Designphilosophie stellt sicher, dass kritische Bedienelemente klar gekennzeichnet und durch intuitive Platzierung leicht zugänglich sind. DasNA-EM5III ist um das umfangreiche N85-Portsystem herum aufgebaut. Optimierte Portlösungen für eine Vielzahl von Micro Four Thirds-Objektiven und der Zugang zu Unterwasser-Korrektionsoptiken machen das Nauticam NA-EM5III Unterwassergehäuse zu einer überlegenen Plattform für Ihre Aufnahmen.  Versteifungshalterungen aus Edelstahl und eine Auslöserverlängerung, die mit den optionalen Easitray II- oder Flexitray II-Tray-Systemen kompatibel sind, sind im Lieferumfang der NA-EM5III enthalten. Ein Zubehörmontagepunkt mit M10-Gewinde ist auch für die Aufnahme der optionalen M10 Blitzmontagekugel bereit, um zusätzliche Flexibilität bei der Zubehörmontage zu gewährleisten. HDMI-Konnektiviät Für das optionale HDMI 1.4-Bulkhead kann ein vorderes M16-Bulkhead für die Verwendung mit externen Monitorgehäusen wie dem NA-502 oder dem NA-502B für die SmallHD 502 und 502 Bright-Monitore verwendet werden.  Siehe Zubehör für empfohlene Konfigurationen. Sucher-Optionen De Olympus E-M5-Mark III hat einen verbesserten elektronischen OLED-Sucher.  Ein klarer Blick für Feinfokussierung und Komposition ist für eine erfolgreiche Unterwasserfotografie entscheidend, und nichts geht über einen vergrößernden Sucher. Diese Sucher verwenden die Entfernung, nicht die Nahsicht, und bieten eine große, klare Sicht auf den hochauflösenden elektronischen Sucher von Olympus. Beide Sucher sind in den Formaten 45º (NA32205) und 180º (NA32204) erhältlich und verfügen über eine externe Dioptrieneinstellung für eine perfekte, auf das Sehvermögen des Fotografen abgestimmte Korrektur. Optische Blitzauslösung in Schnellauslösung Die E-M5 Mark III-Kamera mit dem mitgelieferten FL-LM3-Blitz ist auf Serienaufnahmen mit 2-3 Bildern pro Sekunde begrenzt, selbst wenn im Blitzmenü der Kamera eine geringe manuelle Leistung gewählt wurde. In Situationen, in denen kontinuierliche optische Aufnahmen erforderlich sind, kann der Mini-Blitzauslöser von Nauticam für Olympus (NA26306) externe Blitze über Glasfaser mit bis zu 10 Bildern pro Sekunde auslösen! Der Auslöser wird durch eingebaute Lithiumbatterien im Münzformat betrieben, wobei Tausende von Blitzen aus einem Satz zur Verfügung stehen.   Das NA-EM5III Unterwassergehäuse von Natuciam ist faseroptisch vorbereitet und kann mit Standard Sea&Sea Steckern verbunden werden. Die Nauticam Universal-Glasfaserkabel bieten eine außergewöhnliche Lichtübertragung für präzise TTL-Leistung. Die elektrische Auslösung von alten kabelgebundenen Blitzsystemen ist über ein elektrisches Nikonos-Bulkhead (optional) möglich. Integriertes Vakuumprüf- und Freuchtigkeitswarnsystem Das Nauticam Vakuumkontroll- und Lecksuchsystem ist beim NA-EM5III als Standardausrüstung erhältlich. In Kombination mit einem optionalen Vakuumventil (NA25624 oder NA25625) liefert dieses Überwachungssystem ständige Updates über den wasserdichten und tauchsicheren Status des Gehäuses. Ein einfaches kodiertes LED-Beleuchtungssystem lässt den Benutzer wissen, dass das Vakuum solide ist, oder dass das Gehäuse Vakuum verliert. Die Leckerkennung ist in den gleichen Schaltkreis eingebaut, so dass bei einem Wassereinbruch eine akustische und visuelle Anzeige erfolgt.

The AOI UH-OM-1 underwater housing at a glance Features of the AOI UH-OM-1 underwater housing Durable, shockproof design Lightweight and compact Additional protection through a vacuum analysis and moisture warning system (VWS) and a secure locking mechanism Enhanced ergonomics allow use with gloves with thumb rest, finger grip and accessible controls including an extended release lever Clearly labeled controls allow full access to essential camera functions Ready to use, including body, lens mount and lens accessories. Full accessory pack available: Compatible with most popular underwater housing accessories that use these connection points: 1/4'' tripod thread, hot shoe mount, LCD monitor bezel rails, strap loops, 67mm lens mount threads, QRS slots and fiber optic cable connectors. An underwater housing that grows with your capabilities: Discover expanded possibilities with dedicated camera lenses and AOI's PEN-mount lens Mounts.

This housing is fully compatible with the OM System OM-1 Mark II Camera. The OM Systems OM-1, the first high-end Micro Four Thirds mirrorless camera from OM Digital Solutions. The OM-1 features a 20MP quad-pixel AF stacked CMOS sensor.  It is paired with the latest TruePic X processor to deliver 3x faster processing speeds and is capable of 120 fps shooting with the electronic shutter. The O-M1 can also capture 4K UHD or DCI at 60p in the OM-Log profile for great color grading range. The OM-1 camera by Olympus Reviving the 'OM' moniker on it's 50th anniversary, OM System is releasing the OM-1 Micro Four Thirds camera aimed at the "on-the-go pro".  The OM-1 features a new stacked CMOS 20MP sensor.  The stacked design offers faster readout speeds and improved autofocus capabilities over previous BSI sensors.  Billed as a true hybrid-shooter the OM-1 can capture up to 10-bit DCI or UHD aspect ratio 4K video at up to 60p and HD at 240fps.  Over HDMI, the OM-1's output can be recorded as ProRes RAW on the Ninja V and Ninja V+ recorders from Atomos.  Key Camera Specs 20MP Stacked CMOS Sensor 1053 X-type AF points Up to 120 fps with electronic shutter Image stabilization rated to 7EV of correction (up to 8EV with compatible lenses) Large 5.76M-dot OLED electronic viewfinder Dual UHS-II SD card slots UHD or DCI 4K/60p video, 1080 up to 240 fps Weather sealing rated to IP53 Olympus OM-1 underwater housing by Nauticam The OM Systems OM-1 is characterized by its combination of extreme customizability and impressive stabilization in a compact hybrid-shooting package. The Nauticam NA-OM1, similar to the OM-1 is a refinement of it's predecessors. Nauticam has produced housings for wide range of Micro Four Thirds cameras from Olympus and Panasonic. Throughout the evolution of Micro Four Thirds cameras, Nauticam has adapted our design to help image makers get take full advantage of every camera advancement. More than a simple waterproof case, the NA-OM1 integrates with the OM-1 to adapt and improve upon the camera's features for underwater shooting. MISSION CONTROL Regardless of where a dial or button may be found on the camera body, Nauticam engineers make sure it is located where it is needed most on the housing. This Mission Control philosophy drives the design of every housing and provides for the most intuitive and easy to use housings available. The NA-OM1 features a thumb lever, easily accessed from the ergonomic rubberized right handle that actuates the AF-ON control.  This back-button autofocus method prevents the camera from refocusing between shots, allowing the user fine control over a shot's focus and is critical whether shooting macro or fast moving wide-angle subjects. FLASH TRIGGERING The OM-1 can be used with the optional Olympus FL-LM3 flash inside the NA-OM1 underwater housing by Nauticam to provide accurate TTL flash triggering through the integrated Sea&Sea style fiber optic bulkheads. For high-speed manual flash triggering, the optional Mini Flash Trigger for Olympus (26306) can be used. The trigger is powered by onboard coin style lithium batteries, with thousands of flashes available from a set. Electrical triggering of legacy wired strobe systems is possible via an electrical Nikonos style bulkhead (optional). PREMIUM PROFESSIONAL OPTICS A camera system is only as good as the optics placed in front of it. Nauticam's extensive line of dome and flat ports support a wide variety of Micro Four Thirds lenses. For even higher image quality and versatility, the NA-OM1 can be used in conjunction with Nauticam's lineup of Water Contact Optics. For example, with the Olympus 14-42mm f/3.5-5.6 EZ Lens, the Nauticam WWL-1 provides a full zoom through ultra wide-angle 130º field of view. MAGNIFYING VIEWFINDERS A clear view for fine focus and composition is critical for successful underwater photography, and nothing beats a magnifying viewfinder. These viewfinders use distance, not closeup vision, and provide a large, clear view of the high resolution Olympus electronic viewfinder. Available in Angled 45º (PN 32205 or 32213) and Straight 180º (PN 32204 or 32211) formats, both viewfinders have external dioptric adjustments for dialing in perfect correction matched to the photographer’s eyesight.  The Full Frame Angle Viewfinder 32°/ 1:1 (32213) or the Full Frame Straight Viewfinder 32°/ 1:1 (32211) requires the 32215 Viewfinder Collar Adaptor. INTEGRATED VACUUM CHECK AND LEAK DETECTION SYSTEM The Nauticam Vacuum check and leak detection system is available with NA-OM1 Underwater Housing as standard equipment. Combined with an optional vacuum valve (PN 25624), this monitoring system provides constant updates on the water tight and safe-to-dive status of the housing. A simple coded LED lighting system lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur.

THE SONY A7CII & A7CR CAMERAS Sony's newest additions to its ultra-compact full-frame lineup are the Sony A7CII and the Sony A7CR, which pack a punch. Let's dive in and take a look at the specs of each of these cameras.  A7CII Specifications 33.0MP full-frame Exmor R back-illuminated CMOS sensor Outstanding 4K 4:2:2 10-bit movie recording up to 60p/50p High-resolution XGA OLED electronic viewfinder with 120fps display Wide-area, high-density autofocus with 759 phase-detection AF point Continuous still shooting at up to 10 fps19 with AF/AE tracking A7CR Specifications Full-frame 61.0 megapixel Exmor R image sensor Advanced 5-axis optical image stabilization with up to 7-steps5 of compensation High-resolution XGA OLED electronic viewfinder with 120fps display Continuous shooting with AF/AE tracking at up to 8 fps Wide-area, high-density autofocus with 759 phase-detection AF Points THE NAUTICAM NA-A7CII/R UNDERWATER HOUSING Nauticam is the industry leader in mirrorless interchangeable lens underwater camera support. Nauticam has housed more mirrorless cameras, and more Sony E Mount cameras than any other housing manufacturer. This experience results in the most evolved housing line with broadest range of accessories available today. Pioneering optical accessories elevate performance to a new level. Magnifying viewfinders, the sharpest super macro accessory lenses ever made, and now the highest quality water contact wide angle lenses (the WWL-1 and WACP-1) combine with the NA-A7CII/R housing to form a complete imaging system. Nauticam is known for ergonomics, and an unmatched experience. Key controls are placed at the photographer’s fingertips. The housing and accessories are light weight, and easy to assemble. The camera drops in without any control presetting, and lens port changes are effortless. NA-A7CII/R features an integrated handle system. This ergonomic style provides exceptional control access, even with thick gloves, with ideal placement of the shutter release and a thumb-lever to actuate the AF-ON button from the right handle. Nauticam build quality is well known by underwater photographers around the globe. The housing is machined from a solid block of aluminum, then hard anodized making it impervious to salt water corrosion. Marine grade stainless and plastic parts complete the housing, and it is backed by a two year warranty against manufacturing defects. PREMIUM OPTICS Several in-house Nauticam optical designs, designed by founder and Managing Director Edward Lai, are the perfect lenses to pair with an a7C underwater system. The magic of the water contact lenses is their tremendous versatility, paired with outstanding in-water performance. Both macro and super wide angle optics are available to the underwater photographer on the same dive. These lenses are completely engineered for use in water, providing the highest image quality available today in a water contact optic.  While there are many options, we'll focus on the most compact and versatile setup to match the travel friendly size of the a7C.   WWL-1 is a wide angle conversion lens, compatible with the Sony FE 28-60mm f/4-5.6 lens, providing 130 degree diagonal field of view with full zoom through! The WWL-1 offers class leading center sharpness, corner sharpness, and contrast resulting in some of the best wide angle images possible underwater. CMC-1 and CMC-2 provide the best macro performance for the Sony FE 28-60mm f/4-5.6 lens, with two different magnification strengths, suitable for a wide variety of macro subjects.  CMC-2 is less strong, making it easier to use with more accurate autofocus. CMC-1 is best suited for the smallest of macro subjects. Macro enthusiasts will surely want both! FAST AND RELIABLE FLASH TRIGGERING Reliable rapid fire manual flash triggering is available with the NA-A7CII/R for a variety of optically fired flashes when used with the LED Flash Trigger (NA26302). The NA-A7C comes fiber optic ready and accepts the Universal Fiber Optic Cable (NA26216). Strobes and light arms can be attached to the housing via included 1″ accessory mounting balls.  Electrical strobe triggering is still an option for those with an investment in legacy lighting gear, requiring the purchase of an accessory electrical bulkhead (NA25056). INTEGRATED VACUUM CHECK AND LEAK DETECTION SYSTEM The Nauticam vacuum check and leak detection system is available with NA-A7C as standard equipment. Combined with an optional vacuum valve (NA25624), this monitoring system provides constant updates on the water tight and safe-to-dive status of the housing. A simple coded LED lighting system lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur.

Mit jeder neuen Kamerageneration macht Sony riesige Fortschritte in der Art und Weise, wie Bilder aufgenommen und verarbeitet werden.  Die Sony a7R V verfügt über denselben 61-MP-Sensor wie die vorherige a7R IV, hat aber enorme Fortschritte bei der Verarbeitungskapazität gemacht, was zu Verbesserungen auf der ganzen Linie führt. Mit einer neu entwickelten KI-Verarbeitungseinheit bietet die Sony a7R V ein völlig neues Autofokussystem, das auf einer intelligenteren Motivverfolgung und -erkennung aufbaut. Die Sony a7R V verfügt über eine 8-stufige Bildstabilisierung und beeindruckende Videofunktionen wie die interne 8K-10-Bit-Aufnahme und die externe 16-Bit-RAW-Aufnahme über HDMI, die sie zu einer beliebten Wahl bei Unterwasserfotografen machen werden. Die Sony alpha A7R V Kamera Die Sony a7R V ist die fünfte Generation der hochauflösenden spiegellosen Vollformatkamera von Sony. Der 61,0-Megapixel-Vollformat-CMOS-Sensor mit rückwärtiger Belichtung in Kombination mit dem BIONZ XR-Bildprozessor bietet eine noch nie dagewesene Auflösung, feine Abstufungen und geringes Rauschen bei einer um das 8-fache höheren Verarbeitungsgeschwindigkeit als bei der a7R IV. Im Vergleich zu den Vorgängergenerationen verspricht sie eine robustere Bauqualität, verfeinerte Bedienelemente und den neuesten Autofokus des Unternehmens. Der neue Prozessor sorgt dafür, dass die Motiverkennungsfähigkeiten der Kamera für den Autofokus deutlich verbessert werden. Die a7R IV war in der Lage, Menschen, ihre Gesichter und Augen zu erkennen und zu priorisieren, aber die a7R V geht hier noch viel weiter. Die a7R V ist so konzipiert, dass sie menschliche Motive besser erkennt, aber auch darauf trainiert ist, ein breiteres Spektrum an nicht-menschlichen Motiven zu erkennen. Zusätzlich zu den 8K-Aufnahmen bietet die 4K-Videokamera Oversampling von 6,2k Pixeln ohne Binning, um maximale Details zu liefern, und bietet bis zu 60p-Aufnahmen und S-Cinetone für einen überragenden filmischen Ausdruck. Die Kamera bietet außerdem die kreative Freiheit, kontinuierlich bis zu 583 komprimierte RAW-Bilder mit 10 fps aufzunehmen. Wichtigste Kamera-Spezifikationen: 61,0 MP Vollformat rückwärtig belichteter Exmor R™ CMOS-Sensor AF der nächsten Generation mit KI-Autofokus mit Echtzeit-Erkennung und Deep Learning 4K 16-Bit Rohdatenausgabe; S-Log3/S-Cinetone 8K 24p, 4K 60p, FHD 120p 10-Bit Video 3,2" 4-Achsen Multi-Angle Touchscreen LCD 8-stufige 5-Achsen-Bildstabilisierung Kontinuierliche Aufnahme von bis zu 583 komprimierten RAW-Bildern mit 10 Bildern pro Sekunde EVF mit 9,44 Mio. Punkten und einer Bildwiederholrate von 120 Bildern pro Sekunde  Beispiel-Setup Das Nauticam Unterwassergehäuse für die Sony A7R V Das Unterwassergehäuse NA-A7RV bietet Zugriff auf alle wichtigen Kamerabedienelemente in einem robusten und zuverlässigen Aluminium-Unterwassergehäuse. Der ergonomische Zugang zu den Kamerabedienelementen ist eine der größten Stärken von Nauticam-Gehäusen, und das NA-A7RV setzt diese Tradition fort. Die wichtigsten Kameraparameter lassen sich an den Griffen ändern, ohne dass man umständlich danach greifen muss. Das NA-A7RV-Unterwassergehäuse von Nauticam übernimmt die zentralen Designelemente der Nauticam Pro-DSLR-Serie und bündelt sie in einem kompakteren Paket. Ein patentierter Verriegelungshebel für den Anschluss ermöglicht einen Objektivwechsel in Sekundenschnelle. Das Öffnen des Gehäuses für einen schnellen Batterie- und Medienwechsel ist dank der verschließbaren Gehäuseverriegelungen schnell und einfach. Alle Aspekte des Systems sind eine nahtlose Erweiterung der Kamera. Bedienung Verpasse nie eine Aufnahme, wenn du nach einer Taste oder einem Regler suchst.  Unabhängig davon, wo sich die Bedienelemente an der Kamera befinden, haben die Nauticam-Ingenieure sie dort am Gehäuse angebracht, wo sie am meisten gebraucht werden.  Wichtige Einstellräder und Knöpfe sind durch die verstärkten, ergonomischen Griffe leicht zu erreichen.  Oben am Gehäuse befindet sich ein neuer Hebel, mit dem du schnell zwischen den Modi Standbild, Film und S&Q (VFR Video) wechseln kannst.  Ein doppelter Daumenhebel in der Nähe des rechten Griffs betätigt die REC- und AF-ON-Tasten und ein einzelner Hebel in der Nähe des linken Griffs dient der WIEDERGABE.   Kompabilität mit A7IV Das NA-A7RV Unterwassergehäuse ist sowohl mit der Sony a7R V als auch mit der Sony a7 IV kompatibel. Um die Sony a7 IV zu verwenden, ist das NA17433UK Conversion Kit erforderlich.   HDMI 2.0 An der Vorderseite des Gehäuses befindet sich ein M24-Bulkhead mit großer Bohrung für den Anschluss von externen Monitoren und Recordern mit HDMI 2.0 oder HDMI 1.4 (mit einem Step-down-Adapter auf M16). Eine zusätzliche M10-Gewindeposition in der Nähe der vorderen Gehäusemitte macht die Verwendung eines externen Monitors noch einfacher.  Die a7R V kann 16-Bit-RAW-Videos mit bis zu 4K 60p an externe Rekorder ausgeben. In der Ressourcen-Seitenleiste findest du weitere Details und empfohlene Setups. Professionelle Unterwasseroptiken Das NA-A7RV Unterwassergehäuse von Nauticam basiert auf dem N100 Port System für Sony E-Mount und unterstützt eine Vielzahl von nativen Objektiven mit einer Auswahl an optischen Glas- und Acrylanschlüssen. Über die konventionelle Optik hinaus kann die NA-A7RV die unvergleichliche optische Qualität der Nauticam-Wasserkontakt-Optik nutzen, wie z. B. die WACP-1 oder WWL-1B, die ein Sichtfeld von bis zu 130°, vollen Zoom und einen minimalen Fokusabstand von fast 0" mit den unterstützten Objektiven bietet.  Im Makrobereich bieten die SMC-1 und SMC-2 mit dem 90-mm-Makroobjektiv von Sony eine gestochen scharfe Super-Makrovergrößerung von bis zu 4x. Optische Sucher Präzision erfordert Weitsicht: Eine Kamera wie die Sony A7RV erfordert einen perfekten Fokus für optimale Ergebnisse. Glücklicherweise hat Nauticam die benutzerfreundlichsten austauschbaren Sucher auf dem Markt entwickelt. Der standardmäßige optische Glassucher ist sehr gut und reisefreundlich, aber viele Fotografen bevorzugen die Erleichterungen eines vergrößerten Suchers mit einstellbaren Dioptrien. Nauticam produziert einen "geraden" 180º vergrößernden Sucher und einen um 45º abgewinkelten vergrößernden Sucher, um die Arbeit auf engstem Raum zu erleichtern, die häufig mit Makroaufnahmen verbunden ist. Beide Sucher verfügen über eine hochwertige Optik und ermöglichen eine helle Betrachtung des gesamten Bildes. Eine patentierte externe Dioptrienverstellung ermöglicht eine persönliche, gestochen scharfe Anpassung unter Wasser. Sucherwechsel können in weniger als 30 Sekunden ohne Werkzeug durchgeführt werden. Außergewöhnliche Zusammensetzung und Fokusgenauigkeit waren noch nie so zugänglich. Integriertes Vakuumrüf- und Leckageerkennungssystem Das Nauticam Vakuumprüf- und Leckerkennungssystem ist serienmäßig mit NA-A7RV Unterwassergehäuse von Nauticam erhältlich. In Kombination mit einem optionalen Vakuumventil liefert dieses Überwachungssystem ständige Updates zum wasserdichten und tauchsicheren Zustand des Gehäuses. Der Bediener kann auf einen Blick den wasserdichten und tauchsicheren Zustand des Gehäuses erkennen. Ein einfaches, codiertes LED-Beleuchtungssystem zeigt dem Benutzer an, ob das Vakuum stabil ist oder ob das Gehäuse Vakuum verliert. Die Leckageerkennung ist im gleichen Stromkreis integriert, so dass bei Wassereintritt eine akustische und optische Anzeige erfolgt.  Das Nauticam-System ist temperaturkompensiert und eliminiert Fehlalarme, die durch eine Änderung der Außentemperatur oder durch die Erwärmung einer Kamera bei einem actionreichen Tauchgang verursacht werden. Blitzsteuerung Die Auslösung von externen Blitzgeräten erfolgt über die integrierten Glasfaseranschlüsse, wenn du den optionalen Mini Flash Trigger für Sony (NA26302) verwendest.  Die elektronische Auslösung erfolgt auch über ein optionales Nikonos-Bulkhead. Beachte, dass du für die Verwendung mit dem Vakuumventil den optionalen M14 Offset Connector mit Vakuumventil II (NA25026) benötigst.

Die Sony Alpha 1 richtet sich direkt an professionelle Fotografen und bietet einen 50-MP-Sensor, der Serienaufnahmen mit 30 Bildern pro Sekunde und 8K-Videos ermöglicht.  Sie verfügt über Sonys neuestes Autofokussystem, einen unglaublichen EVF mit 9,44 Mio. Punkten und eine Blitzsynchronisationsgeschwindigkeit von 1/400 Sek. mit dem mechanischen Verschluss. Egal, ob Sie an Fotos oder Videos interessiert sind, diese Kamera kann so ziemlich alles, was Sie brauchen.   Die Sony alpha 1 Kamera Die Sony a1 ist das Flaggschiff unter den Vollformat-Wechselobjektivkameras des Unternehmens.  Mit dem neuen 50,1 MP Exmor RS BSI CMOS Sensor und dem BIONZ XR Prozessor ist die a1 eine Kamera, die wirklich alles kann.  Ihr 759 Punkte schnelles Hybrid-Autofokus-System bietet fortschrittliche Motivverfolgung und Echtzeit-Augen-Autofokus bei Menschen und Tieren.  Die optimierte Verarbeitung in der a1 ermöglicht Serienaufnahmen mit 30 Bildern pro Sekunde bei voller Auflösung sowie 8K 30p und 4K 120p 10-Bit-Videoaufnahmen.    Bei 8K 30p wird die volle Breite des Sensors ausgenutzt, bei 4K 120p wird ein 10%iger Ausschnitt verwendet.  Durch einen Super-35-Crop ist auch eine überabgetastete 4K-Aufnahme über einen 5,8K-Aufnahmebereich möglich.  Für Fotografen, die mehr Flexibilität in der Postproduktion benötigen, ist eine 4,3K-Rohdatenaufzeichnung mit 16 Bit auf einem externen Rekorder über den HDMI-A-Anschluss der Kamera in voller Größe möglich.   Die a1 hat im Vergleich zu ihren Vorgängermodellen auch wichtige Verbesserungen erhalten, darunter einen OLED-EVF mit 9,44 Mio. Bildpunkten und einer Bildwiederholrate von 240 Bildern pro Sekunde.  Der neu gestaltete Verschluss ermöglicht Blitzsynchronisationsgeschwindigkeiten von bis zu 1/400 s und das Gehäuse verfügt über zwei Kartensteckplätze, die entweder CFexpress Typ A oder SD UHS-II Speicherkarten unterstützen.   Hauptmerkmale Sony alpha 1 50,1MP Exmor RS BSI CMOS Vollformatsensor 759 Punkte Fast Hybrid AF mit Nachführung Serienbildaufnahme mit 30 B/s und elektronischem Verschluss 9,44 Mio. Punkte OLED-Sucher mit einer Bildwiederholrate von 240 B/s 8K 30p und 4K 120p Video in 10-bit 4,3K 16-Bit Raw-Videoausgabe Zwei UHS-II / CFexpress-Kartensteckplätze Typ A Das Sony alpha 1 Unterwassergehäuse von Nauticam Nauticam unterstützt die Sony Alpha Vollformat-Linie seit der ursprünglichen a7 mit professionellen Aluminiumgehäusen, die intuitiven Zugang zu allen Bedienelementen und Funktionen der Kameras bieten. So wie sich die Kameras weiterentwickelt haben, haben sich auch die Nauticam-Gehäuse weiterentwickelt. Das NA-a1 Unterwassergehäuse bietet mit den Fingerspitzen Zugriff auf alle wichtigen Kamerabedienelemente in einem robusten und zuverlässigen Aluminium-Unterwassergehäuse. Ergonomischer Zugriff auf die Kamerabedienelemente ist eine der entscheidenden Stärken eines Nauticam-Gehäuses, und das NA-a1 setzt diese Tradition fort. Integrierte Griffe im Stil eines DSLR-Gehäuses mit ergonomischen gummierten Griffen und Versteifungsbügeln aus Edelstahl sorgen für zusätzliche Stabilität und Befestigungspunkte für Zubehör. Die NA-a1 verfügt außerdem über zwei rückseitige Daumenhebel, die vom Griff aus leicht zu erreichen sind und Zugriff auf drei der am häufigsten verwendeten Bedienelemente auf der Rückseite der Kamera bieten. Der rechte Hebel betätigt die Tasten AF-ON und RECORD, während der linke Hebel der Taste PLAY zugeordnet ist. Oben auf dem Gehäuse auf der linken Seite befinden sich Bedienelemente in Form eines MODE-Wahlrads und eines FOCUS-Modushebels. Die Tasten C1, C2 sowie das Einstellrad für die Belichtungskompensation sind ebenfalls direkt von der Gehäuseoberseite aus zugänglich. Die C3, die typischerweise für die Steuerung des Umschaltens zwischen EVF und LCD-Bildschirm belegt ist, ist auf der Rückseite des Gehäuses vom linken Griff aus leicht zu erreichen. Zubehöranschlüsse Die NA-a1 verfügt sowohl über einen M24-Anschluss an der Vorderseite des Gehäuses für HDMI 1.4- und HDMI 2.0-Verbindungen (siehe Seitenleiste für Empfehlungen) als auch über einen M14-Anschluss an der Rückseite für das optionale Vakuumventil (25624). Das Gehäuse wird mit vorinstallierter Elektronik für das Nauticam Vakuumprüf- und Leckerkennungssystem geliefert. Dieses Überwachungssystem liefert ständige Updates über den wasserdichten und tauchsicheren Status des Gehäuses. Ein einfaches farbcodiertes LED-Beleuchtungssystem zeigt dem Benutzer an, dass das Vakuum stabil ist oder dass das Gehäuse Vakuum verliert. Die Leckerkennung ist in denselben Schaltkreis integriert, so dass bei einem Wassereinbruch eine akustische und optische Anzeige erfolgt. Das Nauticam-System ist temperaturkompensiert, so dass Fehlalarme aufgrund von Änderungen der Außentemperatur oder der Erwärmung der Kamera bei einem actionreichen Tauchgang vermieden werden. Hochwertige professionelle Optiken Die große Auswahl an Ports und die hauseigenen Korrekturoptiken von Nauticam sind die perfekte Ergänzung zur Flexibilität der NA-a1. Basierend auf dem N100 Port-System unterstützt die NA-a1 eine Vielzahl von Sony FE-Mount-Objektiven sowie EF-Mount-Objektive über Adapter. Darüber hinaus stehen mehrere Optionen zur Verfügung, um die bahnbrechenden Weitwinkel-Korrekturobjektive WACP und WACP-2 sowie das kompaktere und im Wasser abnehmbare WWL-1B zu verwenden. Mit dem Sony SEL1635GM FE 16-35mm F2.8 GM zum Beispiel bringt das WACP 2 das ursprüngliche 105º-Sichtfeld auf beeindruckende 128º mit schärferen Ecken, einem ~0" minimalen Fokusabstand und einem natürlicher wirkenden Bild, als es ein Standard-Glasdome-Port bieten würde. Blitzauslösung Es sind sowohl faseroptische als auch elektrische Blitzauslösungsoptionen verfügbar. Die Nauticam Universal-Glasfaserkabel werden an den eingebauten Gewinde oben auf dem Gehäuse befestigt und verfügen über modulare Anschlüsse sowohl für Sea&Sea-Stecker als auch für INON-Gewindeanschlüsse. Die Auslösung erfolgt mit dem optionalen Nauticam Mini-Blitzauslöser für Sony (NA26302), der mit Hilfe von LEDs, die von einer eingebauten Knopfzellenbatterie gespeist werden, ein manuelles Signal erzeugt, das über die optischen Kabel an kompatible Blitze übertragen wird.

Sale in the name of Klaus Vanderheyden GmbH i.L. Finds Pit Our finds pit with old treasures - all parts are new and unused. All housings receive a new housing O-ring before delivery. For newcomers who want to take their first steps in underwater photography as inexpensively as possible with the camera they may still have. The discounted prices refer to the last known list price of the product. A full featured and durable waterproof housing for Sony Alpha a7 II, a7R II, and a7S II mirrorless cameras. Suitable for scuba, snorkel, surf, pool, and any application in or around the water. This housing requires the addition of a compatible Four Lock (FL) Lens Port for waterproof operation. Lens Port not included. Full-frame, low-light performance in a packable package. True Sony TTL We would like to introduce an important term that has been missing from all previous discussions about taking the Sony Alpha 7 series underwater: TTL. When your subject is quickly approaching, you'll be glad to have the only housing that provides TTL support for Alpha 7 cameras. An integrated TTL circuit features model-specific encoding, which has been fine-tuned to Sony's latest flash exposure protocol. The circuit is powered by the strobe for zero maintenance and no batteries to change. Exposure compensation in TTL mode is supported using the camera's built-in control. At this time, only Ikelite DS strobes are capable of powering the circuitry. SEA&SEA, INON, and Nikonos strobes will still enjoy fast recycle times and improved battery life, but must be used in manual exposure modes only. A fast and reliable strobe connection is essential to getting the shot underwater. This housing provides a direct electrical connection to the camera's external flash hot shoe. Cord attachment is as easy as screwing in a lightbulb, and the threaded fit prevents accidental detachment during use. The bulkhead connection has been moved to the top of the housing to keep cords out of your way and reduce strain on the cord ends. A variety of sync cord terminations are available for Ikelite, SEA&SEA, INON, or Nikonos strobes for ultimate versatility. The Lens Support You Want It couldn't be faster to change ports than this system—just press the port on and snap the four locks closed. This housing accepts a variety of ports to accommodate all of the most popular zoom, macro, and wide angle lenses from Sony, Canon, Sigma, and more. Our custom optical grade acrylic domes provide the color, clarity, and durability of glass at a fraction of the travel weight. Our new soft touch lobed zoom knob puts a unique system of universal zoom gears right at your fingertips. We provide two zoom sets with each housing, one for use with most popular larger diameter zoom lenses and a second designed for use with smaller diameter zoom lenses. Both sets are lightweight and easy to install with no modification to the lens required. A variety of dome and flat ports attach with four locking latches for maximum security and quick changes between dives. Great Handling A compact mounting tray attaches to the camera's tripod attachment point and slides into the front of the housing simply and securely. The mounting tray features a 1/4-20 tripod mount so that it doesn't need to be removed when you switch to surface photography. Sony created a fantastic control set for this camera series, mimicked in the housing by larger controls and push buttons which are easy to access even with thick gloves. Whenever possible, controls are located in the same configuration as on the camera to replicate the muscle memory and familiarity you've developed with your camera on the surface. Control symbols laser engraved into the back of the housing will never peel off or fade even with years of use. With a system of this caliber, a tray with handle is essential for the attachment of lighting and comfortable handling in a wide variety of shooting scenarios. This housing includes a balanced aluminum tray with our signature quick release handle for easy attachment and removal of strobes and video lights. This unique handle is curved slightly to fit the natural curvature of your hand, and features a soft over-mold which makes it a delight to hold. The complete tray and handle detaches quickly with the removal of two screws for travel. A new modular tray provides a 1/4-20 tripod mount and allows for the attachment of a second right-hand handle to the existing tray. See the O-Ring Seal An o-ring works best when it's true to its original form. Our signature open-groove design suspends the rear o-ring in a natural position that is easier to maintain and more reliable than forcing the o-ring into a channel. For added reassurance, there's no substitute for inspecting the actual o-ring seal through the back of your housing once it is closed. Polycarbonate is fundamentally corrosion-resistant for easy maintenance year after year. We are proud to offer the only housing and lighting system for Sony Alpha a7 series cameras that is 100% designed, built, and tested in the USA. Our housings are handmade and individually inspected for fit, function and waterproof integrity. The average assembly technician is a certified scuba diver and has over 16 years of experience building Ikelite products. We back our products with over 50 years of experience and the most accessible and responsive customer service staff in the dive industry. Compatibility The newer Mark II generation of a7-series cameras are very similar to the the original a7-series cameras, but not interchangeable. Differences in size and lens placement prevent the Sony Alpha a7 Mark I, a7R Mark I, or a7S Mark I cameras from being used in this housing. Please see product # 6843.71.

The Canon EOS R1 marks a groundbreaking evolution by delivering the professional-grade features of the DSLR 1DX series to Canon's mirrorless RF-mount lineup. Built with professionals in mind, the R1 excels in autofocus speed and precision, maintaining exceptional image quality even in fast-paced action or challenging low-light conditions. Boasting Canon's brightest and highest-resolution electronic viewfinder (EVF) to date, along with revolutionary autofocus enhancements, the EOS R1 stands as a testament to innovation and is undoubtedly worth the anticipation. The Canon EOS R1 Camera The Canon EOS R1 is powered by a 24.2MP full-frame backside-illuminated stacked CMOS sensor with Canon's advanced Dual Pixel autofocus system. Its groundbreaking Cross-Type line-detection AF technology promises unparalleled autofocus speed and precision across Canon’s mirrorless lineup.  The R1’s electronic viewfinder (EVF) raises the bar, offering an exceptional 9.44 million-dot resolution on a 0.9x magnification OLED display, making it Canon's most impressive EVF to date. The optional electronic shutter minimizes rolling shutter effects and supports blackout-free shooting, while the first-curtain electronic shutter achieves an X-sync speed of 1/320, dropping to 1/200 with the fully mechanical shutter. For video enthusiasts, the R1 delivers internally recorded RAW footage at up to 6K/60fps and supports 4K/120fps in compressed 4:2:2 10-bit formats. A pre-record mode of 3 or 5 seconds ensures you capture decisive moments in fast-paced action. Enhanced by a refined DIGIC Accelerator processor and improved image stabilization, the EOS R1 excels in producing exceptional video and stills, even in challenging low-light conditions. Canon EOS R1 Specifications: 24.2MP Full-Frame Stacked BSI CMOS Sensor DIGIC Accelerator Processing Dual Pixel Intelligent AF, Eye Control 6K 60 Raw and 4K 120 10-Bit Video 9.44m-Dot EVF with OVF Sim. View Assist Dual CFexpress Type B Memory Card Slots The Nauticam NA-R1 Underwater Housing When it comes to professional underwater imaging, Nauticam housings set the industry standard. Renowned for their intuitive design, unmatched reliability, and a wide range of precision-engineered optics, Nauticam remains the top choice for elite image-makers worldwide. The newest addition to the Canon RF lineup, the NA-R1, brings seamless underwater control to the Canon EOS R1, offering thoughtfully positioned controls, ergonomic handles, and precision dials and levers. The NA-R1 provides full access to all essential controls and customizable buttons, allowing professionals to tailor the housing to their exact needs.  Nauticam Optics To harness the full potential of the R1's 24.2MP CMOS sensor, pairing it with Nauticam's cutting-edge underwater optics is essential. Whether using high-quality glass and acrylic dome ports, the revolutionary WACP series, or the new FCP system, Nauticam optics ensure unparalleled image quality, no matter the subject or conditions. Enhanced Viewfinders The Canon R1’s 9.44M-dot EVF is elevated further with Nauticam’s Enhanced Viewfinders, which provide crystal-clear edge-to-edge viewing in both angled and straight designs, ensuring comfort and accuracy underwater. Flash Triggering For lighting, the NA-R1 supports external flash triggering via built-in fiber optic bulkheads, with optional manual or TTL flash triggers. Hardwired cable connections are also available using additional bulkheads for maximum flexibility when using strobes that don’t support fiber-optic triggering. HDMI Output The R1’s clean 6K HDMI output can be transmitted to external monitors or recorders through Nauticam’s HDMI 1.4 and 2.0 bulkheads and supported monitor housings, making it a complete solution for underwater professionals. Vacuum Check and Leak Detection System The Nauticam vacuum check and leak detection system comes standard with the NA-R1, ensuring unparalleled peace of mind for underwater photographers. When paired with an optional vacuum valve, this advanced monitoring system continuously updates the housing's watertight integrity and dive-ready status. A simple, color-coded LED display allows users to instantly verify if the vacuum is secure or detect if the housing is losing pressure.  Integrated leak detection further enhances safety, providing both audible and visual alerts in the event of water intrusion. The system’s temperature compensation feature prevents false alarms caused by environmental temperature shifts or heat generated by the camera during intense shooting sessions. With this robust technology, divers can focus on capturing stunning images, confident that their equipment is protected.

The Canon EOS R5 Mark II camera The Canon EOS R5II is the next iteration of the widely popular Canon EOS R5 and retains many of the features that were attractive to underwater image makers. Firstly, and most excitingly video shooters now have access to 8K 60 Raw/4K 60 SRAW/4K 120 10-bit Video. The Canon EOS R5II retains its 45MP full-frame mirrorless sensor that utilizes Canon's new RF lens mount and also has next-generation Dual Pixel autofocus. The most important technical data of the camera 45MP Full-Frame Stacked BSI CMOS Sensor DIGIC Accelerator Processing Dual Pixel Intelligent AF, Eye Control 8K 60 Raw/4K 60 SRAW/4K 120 10-Bit Video Up to 30 fps, Pre-Continuous Shoot Mode 5.76m-Dot EVF with OVF Sim. View Assist 3.2" Vari-Angle Touchscreen LCD In-Camera Upscaling to 179MP CFexpress & SD UHS-II Memory Card Slots Wi-Fi 6E/Wi-Fi 6 Support The Nauticam NA-R5II underwater housing for the Canon EOS R5 II The NA-R5II underwater housing follows Nauticam's drive for innovation. Mission control The engineers at Nauticam are obsessed with providing the underwater photographer with unhindered access to all the necessary controls, as many of which as possible are within reach of the ergonomic, rubberised handles. This Mission Control philosophy also applies to the NA-R5II, which has a double thumb lever and a double lower lever on the right handle. The upper thumb lever activates the "AF-On" buttons and the lower one the "Q" buttons, while the lower lever corresponds to the "M-Fn" and "Record" buttons. Near the left handle is a thumb lever for "Playback" and a special switch to switch from using the LCD to the EVF. Large and rubberised control dials allow access to the camera's main and secondary control dials. The two-stage shutter release enables smooth focussing and release. Additional buttons for "menu", "focus point selection" and others are also easily accessible from the grips. An additional control wheel is located on the left side of the housing and can be connected to the control ring of the supported EF to EOS R mount adapter with control ring via the optional gearbox (NA19561). Integrated vacuum test and leak detection system The Nauticam vacuum control and leak detection electronics are part of the standard equipment of the NA-R5. In combination with an optional vacuum valve, this monitoring system constantly provides up-to-date information on the watertight and submersible condition of the housing. A simple, colour-coded LED light system indicates to the user that the vacuum is stable or that the housing is losing vacuum. Leak detection is integrated into the same circuit so that an audible and visual signal is emitted in the event of water ingress. The Nauticam system is temperature compensated, eliminating false alarms due to changes in external temperature or heating of the camera during an action-packed dive.

The Canon EOS R6 Mark II may look like it's predecessor, but it offers a lot of new features attractive to underwater image makers. It has a new 24MP full frame sensor, it is capable of recording UHD 4K/60p without any crop factor internally and also supports ProRes RAW recording up to 6K to an external recorder such as the Ninja V. The Canon EOS R6 II Camera The Canon EOS R6 Mark II is one of the latest in Canon's full-frame mirrorless camera lineup which has gained unprecedented demand.  It features the RF lens mount which has the same large 54mm diameter but the ability to have larger rear lens elements that are closer to the sensor gives increased corner and outer edge sharpness.  TThe R6 Mark II uses an all new 24MP CMOS sensor which boosts the resolution from its predecessor and also significantly improves its rolling shutter performance. It offers in-body image stabilization rated at up to 8 stops of correction. The camera's Dual Pixel CMOS AF II autofocus system uses 1053 autofocus points across the entire frame. It is also capable of recording 4K video at up to 60p internally and 6K 60p extern The EOS R6 Mark II can also use the large EF-mount lens lineup via the Canon RF to EOS R Adapter. Key specifications 24.2MP full-frame CMOS sensor UHD 4K shooting up to 60p, 1080 at up to 120p, 6K ProRes RAW recording externally up to 60p 100% coverage Dual Pixel II AF system 12 fps / 40 fps burst (mechanical / electronic shutter) 3.69M-dot OLED EVF 3" 1.62M-dot vari-angle touchscreen LCD 580 shot-per-charge battery rating Dual UHS-II SD Slots The Nauticam Underwater Housing for the Canon EOS R6 Mark II Camera The NA-R6II underwater housing follows suit with Nauticam's drive for innovation and it supports both the Canon EOS R6 and R6 Mark II. A conversion kit is required for the original R6 and will be provided upon request. Like its predecessors, the NA-R6II presents shooters with the ability to use both the available legacy EF lenses via an adapter in addition to their native RF optics. To support both the legacy and native lenses, Nauticam has integrated the NA-R6II into the N120 port system. Canon's EF to RF mount adapters can be affixed to the camera before insertion into the housing. When using the EOS R6 Mark II inside the housing with the adapter and a supported EF lens, the port and extension ring arrangement will be identical to the same setup on a Nauticam Canon N120 DSLR. With the ever growing RF lens lineup, you can also follow the dedicated N120 Canon RF port chart that is being updated and expanded with each new lens release. Please note that the Canon Control Ring and Drop-in Filter EF to EOS R adapters are not accessible within the housing. Mission Control Nauticam engineers are obsessed with getting the underwater image maker unfettered access to all the necessary controls, with as many within easy reach of the ergonomic rubberized handles. This Mission Control philosophy extends to the NA-R6II where a dual thumb lever and sub-lever are placed by the right handle. The dual thumb lever on the front right side activates the "M-Fn" and "Rec" buttons while the sub-lever on the right rear side corresponds to the "AF-ON" button. Near the left handle is a thumb lever for "Playback" for easy image review. Large knurled and rubberized control dials access the camera's "main" and "sub" command dials. The two-stage trigger allows for smooth focus and firing activation. Additional buttons for "Menu", "Focus Point Selection" and others are also easily reached from the handles Flash Triggering Flash triggering is achieved via one of two optional Flash Triggers, a manual LED trigger (NA26301) or a TTL Flash Trigger (NA26321) that use the built-in fiber optic bulkheads with optional fiber-optic cables to trigger supported strobes. For controlling strobes that do not support fiber optic flash triggering, a variety of legacy hot-shoe flash control bulkheads are available. Integrated Vacuum Check and Leak Detection System The Nauticam vacuum check and leak detection electronics are shipped with the NA-R6 as standard equipment. Combined with an accessory vacuum valve (NA25625) this monitoring system provides constant updates on the water tight and safe-to-dive status of the housing. A simple color coded LED lighting system lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur. The Nauticam system is temperature compensated, eliminating false alarms caused by a change in outside temperature, or from a camera heating up on an action packed dive.  

Underwater housing X-2 R6 Mark II by INON A housing for Canon EOS R6 Mark II INON strobe compatible ultra-accurate multi-functional built-in "TTL Converter" as standard feature Control flash amount directly from camera 12 shots/sec. continuous shooting supported Equipped with “Quick Shoe System” for quick switch between horizontal and vertical camera composition Standard “Vacuum Leak Sensor (PAT. P)" checks housing sealing in only 5 minutes MRS port further evolves to support fine manual focusing Optional two viewfinders provide bright and clear finder image Lightweight and compact ultra-precision cast aluminum body Ultra-accurate multi-functional built-in "TTL Converter"    The "TTL Converter" equipped as a standard feature, triggers INON strobe optically to enjoy fully automatic TTL. Exclusively developed for INON strobe based on its flash protocol to optimize its performance for underwater use. As an underwater strobe manufacturer, we successfully achieved the TTL Converter that provides constant, stable and highly accurate TTL exposure. Strobe manual power is directly adjustable from camera INON strobe manual power is directly adjustable from camera ranging between 1/64 and FULL at 1/3EV. increments. Useful when strobe is positioned away like on long strobe arm or when shooting with backlit technique. 12 shots/sec. continuous strobe firing ***** The TTL Converter fully supports [High speed continuous][High speed continuous+]. With ultra-accurate TTL shooting is now available for continuous shooting based on electricity stored in a capacitor6. INON TTL Converter strives efficiency in battery consumption not to miss precious moment and successfully provides more than 100,000 flash triggering only by two CR2032 coin batteries.   Built-in "Vacuum leak sensor" confirms housing sealing in 5 minutes The "Vacuum Leak Sensor" ensures housing sealing by monitoring air pressure inside of the housing during leak check and warns accidental flooding with LED blinks and buzzer during diving. The onboard pressure sensor changes sensitivity for leak check and diving by variable control program (PAT. P).  The supersensitive pressure sensor detects even fine leakage. Not as like conventional leak sensors, it drastically shortens test time (from 30 seconds to 5 minutes). The sensitivity of the dive mode eliminates false alarm even when ambient temperature changes. New S-MRS Port Newly developed S-MRS (Magnetic Rotary System) controls focusing and zooming by magnetic attraction. The new S-MRS provides smoother operation with less play or rattle comparing to the previous model. By combining the EOS R5 with an RF lens, the MF Peaking function can also be used during full-time manual focusing. Together with the focus guide function, this enables ultra-precise focusing.  Maximum three MRS Control Rings can be installed to control the Control Ring, Focus Ring and SA Control Ring. Lightweight and compact ultra-precision cast aluminum body The X-2 R6 II is made from corrosion resistance aluminum alloy by ultraprecise cast manufacturing technique to fuse design, weight and durability in higher dimension. The cast manufacturing technique enables thin body plate with complicated curved design which is not possible with machining. Lightweight and durable aluminum alloy body has acquired reliability, durability and controllability even in severe underwater.

With Canon EOS R6 IIthe producer has focused on the photographer's creativity, wanting to support the user in his artistic flair with a camera defined as "radical". With silent shooting at 20 fps, Dual Pixel CMOS AF II sensors and ISO 102,400 this camera promises to meet expectations even under water, allowing you to photograph moving subjects even in low-light. The image stabilizer, 20 megapixel photos and the ability to shoot 4K video, make this camera complete. Built for speed, it produces up to 240 images in RAW format. The possibility of using the double memory card certainly helps to shoot more lightly. Product details Canon EOS R6 II Underwater Housing by Isotta The housing respects all the key points of Isotta's line of housings: one-handed opening, double O-ring seals for greater safety, the use of high quality materials and the made in Italy craftsmanship. The housing was created to follow the lines of the camera, resulting small and manageable, while ensuring complete control of camera functions and absolute freedom in the use of accessories. MAN BEFORE MACHINE! The focus in the study of the housing goes to the diver who decides to use it. The comfort in the use and management of the machine in water is a fixed point, studied in every detail. The handles are ergonomic, adjustable and interchangeable*. if necessary; the housing is compact and lightweight, so you won't tire your arm too much and have an excellent control over stability. All buttons are conveniently reachable from the grip position of the handles ensuring maximum management of the camera with minimum effort. The rear back offers a full view of the camera screen so that you can shoot in live view unobstructed and in comfort and it detaches completely from the front body so that it is easy to insert the camera and perform operations inside the housing. The presence of the viewfinder allows you to take pictures framing in the classic way and to replace it with a magnifier. The closing knob is Single-hand actionable. MORE AND MORE CUSTOMIZABLE! Supplied with only the connections for the optical fiber, the housing has been designed with three M16x1 connections and one M24x1 connection, for total freedom in the choice of the conformation of the equipment. When ordering, you can select your preferred lighting control system choosing between Trigger, Sincro N5 or S6 and your right port system. Through the different combinations between ports and extension rings it is possible to use most of the lenses on the market. Various accessories can be used by means of an M8 hole located at the top of the case and two M6 threaded holes located at the bottom. To make it even more unique, have your name or logo engraved. SAFETY IS IMPORTANT! The locking pins on the back are made of stainless steel and penetrate the shell for added strength and security. The housing is made of aluminum, resistant and anti-corrosion, anodized in the unmistakable red color. The classic double o-ring seal is on all moving and removable parts ensures an optimal watertight seal. The camera is held straight, centered and in place by a mounting plate with a safety catch, which slips nimbly into the housing. NNo risk of sudden infiltration. A red humidity alarm inside the case is powered by a user-replaceable battery and instantly signals an increase in humidity in a critical area. Watertightness is guaranteed up to a maximum depth of 100 meters. Highlights Red color anodized aluminum body 
 ergonomic side handles, adjustable (via optional accessory) Two fiber optic connections standard(to use the flash needs an optional trigger) Two M16 holes and one M24 for installation of accessories, e.g. syncro cords, vacuum valves, Monitors 
 Back housing completely detachable from the front housing Tray with lock for the easy insertion of the camera Single-hand closing knob for the back of the housing Aluminum buttons and dials with engraved symbols identical to camera controls Wide back display viewfinder glass Double O-Ring seals on all buttons and removable parts Moisture sensor with LED indicator (replaceable battery) 
 Removable port 120 mm bayonet 
 Ports security latch to prevent accidental Opening 
 Wide, rubber covered feet for solid footing on boat floors or sea Floor M8 hole located on upper side of the housing for various accessories such as focus Lights 
 Two M6 holes located on housing bottom side for different accessories such as brackets for strobes or tripods Prepared for ISOTTA vacuum (not included) External viewfinders can be mounted, INON X-2 compatible

Underwater housing X-2 R6 by INON A housing for Canon EOS R6 INON strobe compatible ultra-accurate multi-functional built-in "TTL Converter" as standard feature Control flash amount directly from camera 12 shots/sec. continuous shooting supported Equipped with “Quick Shoe System” for quick switch between horizontal and vertical camera composition Standard “Vacuum Leak Sensor (PAT. P)" checks housing sealing in only 5 minutes MRS port further evolves to support fine manual focusing Optional two viewfinders provide bright and clear finder image Lightweight and compact ultra-precision cast aluminum body Ultra-accurate multi-functional built-in "TTL Converter"    The "TTL Converter" equipped as a standard feature, triggers INON strobe optically to enjoy fully automatic TTL. Exclusively developed for INON strobe based on its flash protocol to optimize its performance for underwater use. As an underwater strobe manufacturer, we successfully achieved the TTL Converter that provides constant, stable and highly accurate TTL exposure. Strobe manual power is directly adjustable from camera INON strobe manual power is directly adjustable from camera ranging between 1/64 and FULL at 1/3EV. increments. Useful when strobe is positioned away like on long strobe arm or when shooting with backlit technique. 12 shots/sec. continuous strobe firing ***** The TTL Converter fully supports [High speed continuous][High speed continuous+]. With ultra-accurate TTL shooting is now available for continuous shooting based on electricity stored in a capacitor6. INON TTL Converter strives efficiency in battery consumption not to miss precious moment and successfully provides more than 100,000 flash triggering only by two CR2032 coin batteries.   Built-in "Vacuum leak sensor" confirms housing sealing in 5 minutes The "Vacuum Leak Sensor" ensures housing sealing by monitoring air pressure inside of the housing during leak check and warns accidental flooding with LED blinks and buzzer during diving. The onboard pressure sensor changes sensitivity for leak check and diving by variable control program (PAT. P).  The supersensitive pressure sensor detects even fine leakage. Not as like conventional leak sensors, it drastically shortens test time (from 30 seconds to 5 minutes). The sensitivity of the dive mode eliminates false alarm even when ambient temperature changes. New S-MRS Port Newly developed S-MRS (Magnetic Rotary System) controls focusing and zooming by magnetic attraction. The new S-MRS provides smoother operation with less play or rattle comparing to the previous model. By combining the EOS R5 with an RF lens, the MF Peaking function can also be used during full-time manual focusing. Together with the focus guide function, this enables ultra-precise focusing.  Maximum three MRS Control Rings can be installed to control the Control Ring, Focus Ring and SA Control Ring. Lightweight and compact ultra-precision cast aluminum body The X-2 R6 is made from corrosion resistance aluminum alloy by ultraprecise cast manufacturing technique to fuse design, weight and durability in higher dimension. The cast manufacturing technique enables thin body plate with complicated curved design which is not possible with machining. Lightweight and durable aluminum alloy body has acquired reliability, durability and controllability even in severe underwater.

THE FUJIFILM GFX 100 II CAMERA The GFX100 II introduces a revolutionary 102-megapixel large-format sensor. With the GFX100 II, you will experience precise subject detection and tracking AF and unparalleled video capabilities never seen in any previous GFX system or X Series camera. Enhanced by upgraded AI-developed autofocus algorithms and a cutting-edge 9.44-million dot EVF, photographers gain unparalleled accuracy. Filmmakers will benefit from full-width 4k/60, 4:2:2 ProRes Video. Key Camera Specifications New 102mp CMOS II HS and X-processor 5 9.44 million dot EVF Full width 4k60 4:2:2 ProRes Multiple Cinema Formats: FUJINON, PREMISTA,35mm, and 35mm Anamorphic  Worlds first: Natively enabled for Frame.io Camera-to-cloud integration with no accessory requirements  The GF-mount lens lineup continues to grow, with more and more lenses meeting the criteria underwater image-makers are after. Paired with the camera's medium-format 102MP sensor, which is 68% larger than a full-frame sensor, the resulting images have lower noise and greater dynamic range for a given exposure value. The GFX100 II features the latest X-Processor 5 chip which powers the improved autofocus system that covers virtually 100% of the image area. The camera's large built-in OLED viewfinder has a 9.44M-dot resolution and features variable refresh rates and resolution to enhance battery life. Video from the GFX100 II uses the full sensor width, preserving the original field-of-view of the lens, and can be recorded internally as 4K 60p video. Over HDMI the GFX100 II can output either an uncompressed 16-bit raw or 10-bit 4:2:2 4K video signal, excellent news for those using external monitors/recorders such as the Atomos Ninja V. With dedicated settings for both still or video modes, switching between shooting modes is quick and easy via a lever atop the camera. The camera's "Q" menu can be customized to provide the most valuable information as either an overlay on the live-view representation or as the entire LCD area. The NA-GFX100II Underwater Housing by Nauticam The NA-GFX100 II is built with the singular focus of creating an underwater housing that blends ergonomic design, intuitive control placement, and rugged field-tested durability. The resulting machined aluminum housing can be further refined with the addition of accessories from magnifying viewfinders to external monitors/recorders. Achieving the full benefit of the stunning 102MP resolution requires the use of underwater optics that are designed with high-resolution lenses in mind to deliver the highest optical quality possible. Mission controll design The NA-GFX100 II is designed with our Mission Control philosophy which dictates placing controls where they are needed most, meaning no more missed shots fumbling for a control or dial. The majority of exposure and focus controls are within easy reach of the ergonomic handles that feature stainless steel stiffening brackets to reduce any unwanted movement even when using large strobes or video lights. A multi-direction pad on the upper right of the rear panel gives access to the camera's joystick. A double lever near the right handle activates the 'AF-ON' and 'Q' controls. Also on the right side are levers for Focus and View modes. Also, a new front lever to quickly switch between aperture and ISO sensitivity. The left side has a double lever for 'PLAYBACK' and 'DISP' as levers for turning the EF-X20 TTL flash on or off and a front double lever to access Fn5 & Fn6. On top of the housing is a lever for switching between 'STILL' and 'VIDEO' modes. Premium proffesional Optics Built around the N120 Port System, the NA-GFX100 II supports a variety of GF-mount lenses with a selection of optical-quality glass and acrylic ports as well as access to Nauticam's lineup of premium professional optics. These optics are designed using industrial lens design software to provide unparalleled optical quality and impressive fields of view. The Wide-Angle Conversion Port 2 or WACP2, when used with the Laowa 17mm f/4 GFX Zero-D lens can achieve an impressive 140º FOV with an almost 0" minimum focus distance and incredible corner sharpness even at wider-open apertures such as f/5.6. Flash Triggering Flash triggering is via the optional 26351 Flash Trigger for Fujifilm and built-in fiber-optic bulkheads. An option for electronic strobe connection without TTL is also possible using the optional M14 Nikonos bulkhead with a universal hot shoe. HDMI Output The GFX100 II can output high-quality uncompressed 4K video over HDMI and the NA-GFX100 II is compatible with the Nauticam HDMI 2.0 system via the front M24 bulkhead. Even when recording video internally, the use of an external monitor over either HDMI 1.4 or 2.0 is a great tool to help with composition or image review. Vacuum Check and Leak detection system The NA-GFX100 II comes with the Nauticam vacuum check and leak detection system as standard equipment. Combined with an optional accessory vacuum valve this monitoring system provides constant updates on the water-tight and safe-to-dive status of the housing. A simple color-coded LED lighting system lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur. The Nauticam system is temperature compensated, eliminating false alarms caused by a change in outside temperature, or from a camera heating up on an action-packed dive.

The Nikon Z6III camera The Nikon Z6III is pushing the limits in video capabilities now offering 6K 60p N-RAW, 6K 30p ProRes RAW & improved Autofocus to the like of the Z9 & Z8. The Nikon Z6III offers the same legendary Nikon sensors with the versatility of an electronic viewfinder and the more compact form factor of a mirrorless system. With the release of the NA-Z6III underwater housing, you can now take your underwater videography and photography to the next level. The ergonomic housing design ensures each essential control is re-routed to the left and right handles. This makes on-the-fly setting adjustments easier than ever.  Main features of the camera 24.5MP Partially-Stacked CMOS Sensor EXPEED 7 Image Processor 6K 60p N-RAW, 6K 30p ProRes RAW 4K 120p, Full HD 240p Slow Motion Video Up to 20 fps Raw, 60 fps JPEG Shooting Blackout-Free, 5760k-Dot EVF 493-Point AF, AI-Based Subject Detection 3.2" 4-Axis Tilting Touchscreen LCD CFexpress Type B & SD Memory Card Slots Camera-to-Cloud Direct Connectivity The  NA-Z6IIII underwater housing from Nauticam The NA-Z6III underwater housing follows Nauticam's drive for innovation. Nikon F-Mount & Z-Moint lens support The Nauticam NA-Z6III is designed to accomodate both Z-Mount and F-Mount lenses.  With the new compact design of the NA-Z6III housing, there are newly released zoom and focus gears which will drive off the main zoom/focus knob on the housing.  There is also the 22225 N120 FTZ Adapter ER 25 with Knob which will allow you to use previous generation Z-Mount zoom and focus gear along with F-Mount lenses and their corresponding gears.  For complete compatibility details, you can view the NA-Z6III Port Chart.   Intelligent operation Nauticam engineers are obsessed with functionality, and this is evident in the placement of the most important controls. Regardless of where the controls are located on the camera, the Nauticam housing puts them where you need them underwater. High-quality professional optics Optical performance is just as important as camera performance, and this becomes even more important given the challenges of filming underwater. This range of dry and wet lenses has been developed using commercial lens design software to achieve truly unrivalled underwater image quality for both stills and video in macro and wide-angle situations. The WACP-1 and WACP-2 achieve an ultra-wide 130º field of view with less distortion than conventional optics and offer a minimum focus distance of ~0", zoom through and unbeatable corner sharpness even at wide open apertures such as F5.6. The SMC-1 and SMC-2 macro wet lenses offer 2x and 4x magnification respectively when combined with the Nikon 105mm f/2.8G VR macro lens. The SMC-1 even delivers an image with higher contrast and sharpness than the 105mm lens itself can achieve in air without magnification.

The Z 7II and Z 6II, Nikon's next generation full-frame mirrorless cameras, offer underwater shooters the same legendary Nikon sensors with improved autofocus and continuous shooting speed performance. The NA-Z7II supports both the Z 7II and Z 6II models and features the larger-bore M28 bulkhead that supports HDMI 2.0 connections needed for the Atomos Ninja V Recorder/Monitor. THE NIKON Z 6II AND Z 7II CAMERAS For many full-frame Nikon shooters the appeal of a mirrorless camera had been tempered by the thought of having to invest in and master a new system by moving to another ecosystem such as Sony. For those awaiting a mirrorless system that utilized Nikon imaging technology and ergonomics, the wait is over. The Z 6II and Z 7II cameras feature an identical body, differing only in their feature sets, an ideal feature when it comes to housing the camera for underwater use.  Each camera also features dual EXPEED 6 image processor to significantly improve autofocus and continuous speed shooting.   Both camera bodies are built around Nikon's Z-mount. With an incredibly wide 55mm mount diameter (17% larger than F-mount) and very short flange distance, the Z-mount is able to offer a maximum aperture of F0.95. While the current range of Z-mount lenses continues to grow, almost the entire line of F-mount lenses is usable with the optional Nikon FTZ Adapter. When using the adapter, even non VR lenses benefit from the camera's in-body stabilization. VR and Z-Mount lenses receive 5-axis stabilization whereas non-VR F-mount lenses have access to 3-axis stabilization. There is also a dedicated e-VR (electronic VR) that combines optical and electronic stabilization for video shooting. Both the Z 6II and Z 7II will be able to capture internal UHD 4K at 60fps or 1080 HD at up to 120fps.  The Z 6II will be able to record 4K/60P early in 2021 through an expected firmware update.  In addition to N-Log, both cameras also feature HLG (hybrid-log gamma for HDR) which work in 10-bit 4:2:2 over HDMI 2.0 to an external recorder such as the Ninja V.   The OLED electronic viewfinder (EVF) of both the Z 6II and Z 7II gives 100% frame coverage at Quad-VGA (3.69M dot) resolution. When triggering external flashes, both cameras feature a 1/200 X-sync shutter speed. THE NIKON Z 7II CAMERA The Z 7II features a high resolution 45.7MP FX-format sensor that can shoot at up to 10FPS. The Z 7II features a wide ISO range of 64-25,600. Autofocus is achieved with 493 on-sensor AF points that cover 90% of the frame and the camera intelligently switches between contrast-detection and phase-detection points to achieve accurate focus regardless of light conditions. KEY CAMERA SPECS: 45.7MP FX Format Sensor with no OLPF 10 FPS continuous shooting 64-25,600 ISO Range UHD 4K 60p recording with 1.08x crop 10bit UHD 4K N-log output via HDMI with start/stop support 5-axis VR stabilization (with Z lenses) 3.69M-dot EVF, 3.2" 2.1M-dot rear screen -3EV focusing with F2.0 lens 1 CFExpress / XQD card slot, 1 UHS-II SD card slot THE NIKON Z 6II CAMERA The Z 6II is equipped with a 24.5MP FX-format sensor capable of up to 14FPS continuous shooting with an ISO range of 100-51,200. Video is currently recorded internally at up to UHD 4K 30p.  UHD 4K 60p with a 1.6x crop will be available in early 2021 through a firmware update. 273 on-sensor focus points cover 90% of the fame and the Z 6II intelligently switches between contrast-detection and phase-detection points to assure accurate autofocus. KEY CAMERA SPECS: 24.5MP FX Format Sensor with OLPF 14 FPS continuous shooting 100-51,200 ISO Range Full Sensor UHD 4K 30p  UHD 4K 60p recording with 1.6x crop (firmware update early 2021) 10bit N-log UHD 4K output via HDMI with start/stop support 5-axis VR stabilization (with Z-mount lenses) 3.6m-Dot OLED Electronic Viewfinder Two card slots (1x CFexpress/XQD, 1x UHS-II SD) THE NAUTICAM NA-Z7II UNDERWATER HOUSING The NA-Z7II underwater housing follows suit with Nauticam's drive for innovation. Both the Nikon Z 6II and Z 7II present shooters with the ability to use both the available legacy F Mount lenses via the FTZ adapter in addition to their native Z Mount optics.  To support both the legacy and native lenses, Nauticam has integrated the NA-Z7II into the N120 port system.  This is critical as the new Z mount lenses are being phased in over the next few years. The Nauticam NA-Z7II housing features two lens release buttons that correspond to either F or Z mount lenses. When switching between F and Z mount lenses, the camera must be removed from the housing to remove the adapter. When working within either the F or Z mount system use the appropriate lens release button to switch lenses without having to remove the camera from the housing. A vacuum system reset switch is located below the tray as well so there is no need to open the rear of the housing during lens or port changes. The NA-Z7II is part of the N120 port system which allows for full support of Nikon F mount lenses with the same ports needed for their application on Nikon SLR housings. As more Z mount lenses become available Nauticam will add supported configurations. INTELLIGENT CONTROL PLACEMENT Nauticam engineers are obsessed with functionality and this is evident in the location of essential controls. Regardless of where the control is located on the camera, the Nauticam housing puts them where you need them to be underwater. For those switching between photo and video modes, an easily reachable switch is located on the right rear of the housing. The right side double thumb lever, easily reached from the right handle features access to the AF-on and Record buttons respectively. Between the double thumb lever and the multi-stage shutter release is an ISO lever allowing quick changes to sensitivity. The left double thumb lever accesses the DISP and Playback controls. The Zoom In and Zoom Out controls, located on the right rear of the camera body is relocated to the left side of the housing to a location more familiar to Nauticam housing users. The switch that allows for switching between the LCD display and the EVF, a crucial and much used control with mirrorless systems is located close to the left handle within easy reach. Front and rear control dials are readily accessible by the familiar large knurled dials at the right handle. The ergonomic housing handles are rubberized and feature stainless steel stiffening brackets to ensure a stable platform when using large strobes or video lights attached to the pre-installed 1" mounting balls. FLASH TRIGGERING The NA-Z7II comes with Nauticam's self powered manual flash trigger preinstalled. The flash trigger plugs into the hot-shoe of the camera and uses LED lights recessed into each of the two optical bulkheads to trigger supported underwater flashes when used with the correct fiber optic connection. The flash trigger is powered by coin cell batteries that provide thousands of flashes per battery. The flash trigger can be upgraded to support TTL triggering (PN 26308 TTL Converter for Nikon). INTEGRATED VACUUM CHECK AND LEAK DETECTION SYSTEM The Nauticam vacuum check and leak detection system is shipped with NA-Z7II as standard equipment. Combined with an accessory M16 vacuum valve (PN 25625), this monitoring system provides constant updates on the water tight and safe-to-dive status of the housing. A simple color coded LED lighting system lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur. The Nauticam system is temperature compensated, eliminating false alarms caused by a change in outside temperature, or from a camera heating up on an action packed dive. PREMIUM PROFESSIONAL OPTICS Optical performance is just as necessary as camera performance and this becomes even more critical given the challenges of filming underwater. The Nauticam NA-Z7II uses the same N120 Port System as the previous NA-Z7 which makes for a seamless transition for those upgrading to the "II." While this system provides exceptional optical-glass and flat port solutions for a wide variety of F and Z Mount lenses, the real power of the Z 6II and Z 7II can be realized using Nauticam's Water Contact Optics. This lineup of dry and wet lenses are conceived using commercial lens-design software to achieve truly unparalleled underwater image quality both for stills and video in both macro and wide-angle situations. The WACP-1 and WACP-2 achieve ultra-wide 130º fields-of-view with reduced distortion over conventional optics while featuring ~0" minimum focus distances, zoom through capabilities and unbeatable corner sharpness at even wide-open apertures such as F5.6. The SMC-1 and SMC-2 macro wet-optics, when used with the Nikon 105mm f/2.8G VR macro lens provide 2x and 4x magnification respectively and the SMC-1 actually provides a resulting image with increased contrast and sharpness than the 105mm lens itself can achieve in air without a magnifier.

An ergonomic highly professional product entirely Made in Italy that offers the highest quality and enhanced performance underwater. Isotta's Nikon Z8 Underwater Housing The durable anodized aluminum protects the camera from water and other damaging elements and its stylish, compact and ergonomic design has been specifically created for the breakthrough models of mirrorless Nikon Z8. The perfect handling of the Isotta signature-red color Nikon Z8 housing is possible by means of adjustable handles crafted to match the human hand and make holding the camera very comfortable even throughout long dives. Easy access to all key/main camera controls by means of clearly labelled laser-engraved longlasting buttons, even with gloves and drysuit gloves. An quick release camera mounting plate allows the camera positioning and a lever locks the tray inside the housing. The back door has a large window anti-scratch glass for a fine camera display and optical viewfinder view and it is entirely detached from the front body to make easier the camera fitting. External viewfinders can be mounted, INON X-2 compatible. ONE HAND OPEN/CLOSE The housing for Nikon Z8 is closed with Isotta’s single handed one-turn knob. It’s the only single latch closing mechanism in the DSLR housing market. It’s fast, simple and secure thanks to its double steel pins at the bottom of the housing. PORTS AND EXTENSION RING A series of ports and extension rings are available in dedicated section. The removable port is fitted thanks to markers and a bayonet 120 mm connection to the Nikon Z8. The interchangeable port bodies and extensions rings combine to allow the use of most of lenses on the market for maximum versatility and performance. CONSTRUCTION AND SAFETY Only the best materials are used to manufacture our housings such anodized aluminum which is anticorodal and thermo-coated and stainless steel. A longlasting product that requires easy and simple maintenance by the user. Dual high-quality O-Ring seals protect and ensure a perfect and secure watertight for all movable and / or removable parts; a red alarm for humidity/water inside the housing is powered by a battery replaceable by the user. Working depth is 100 metres. Different accessories can be fitted by means of one M8 hole positioned on the upper side of the housing and two threaded M6 holes located on housing bottom side. Three M16 x1 threaded holes can be used for different needs such as to accomodate a vacuum. Controls On and off lever of the Nikon Z8 Ergonomic camera focusing and shutter lever, easy to use with gloves Lens release lever Front dial Fn1 lever Fn2 lever Fn3 lever ISO button MODE button BKT button Flash button +/- button Focus mode button Quick release-mode button Zoom knob Port safety lever Movie lever (REC) AF-ON lever Rear dial R Release mode knob I (info) button Menu button AEL button DISP. button Multi-selector Playback, Viewing pictures button Zoom-in (+) button Zoom-out (-) button Qual button WB button Delete button Fn4 button Photo/video selector On/Off Display lever Highlights Ergonomic side handles, adjustable (via optional accessory) Two fiber optic connections standard (to shoot it needs an additional trigger) Three M16 holes and one M28 for installation of accessories, e.g. syncro cords, vacuum valves, monitors Back housing completely detachable from the front housing Tray with lock for the easy insertion of the camera Single-hand closing knob for the back of the housing Aluminum buttons and dials with engraved symbols identical to camera controls Wide back display viewfinder glass Double O-Ring seals on all buttons and removable parts Moisture sensor with LED indicator (replaceable battery) Removable port 120 mm bayonet Ports security latch to prevent accidental opening Wide, rubber covered feet for solid footing on boat floors or sea floor M8 hole located on upper side of the housing for various accessories such as focus lights Two M6 holes located on housing bottom side for different accessories such as brackets for strobes or tripods External viewfinders can be mounted, INON X-2 compatible

The Z8 is arguably the most hotly anticipated full-frame mirrorless camera from Nikon and the first to feature the '8' series badging.  Featuring a high-resolution 45.7MP sensor that will also capture 8K/60p N-RAW video while delivering incredible autofocus and dynamic range.  The Z8's 3690k-dot OLED EVF packs a fast refresh rate for blackout free shooting thanks to the camera's electronic shutter. The Nauticam NA-Z8 is the latest release in the world's finest line of underwater camera housings and builds on the field-proven housings for other Nikon 'Z-series' cameras . Nauticam is the market leader in ergonomics, build quality, and reliability that are built on a foundation of innovative product design and modern manufacturing technology. The NA-Z8 is the ultimate accessory for the powerful Nikon Z8. THE NIKON Z8 The excitement for the Nikon Z8 rivals that of the release of the Nikon D850. Nikon shooters have been eagerly waiting for what this "mini" Z9. The D850 long ruled the Nikon roost for incredible image quality, amazing autofocus and a wide dynamic range all in a high-resolution package.  While the Z6/7 and Z9 have bracketed the spectrum of specs, the Z8 is the system that many D850 shooters have been waiting for. The Nikon Z8 features a 45.7MP stacked CMOS sensor that is delivers incredible still and moving image performance.  The Z8's electronic shutter means true zero blackout continuous shooting when using the camera's EVF and the wide range of autofocus options insure there's the right mode for every situation. For video shooters, the Z8 can capture up to 8K/60p or oversampled 4K/120p internally in their ultra-efficient 12-bit N-RAW format or a variety of ProRes formats including ProRes RAW.  The Z8 also adds pro-level video features such as a waveform monitor, focus peaking, and the ability to fine tune ISO at 1/6EV steps.  There's also a convenient 'Video Info Display' and Red Record Border. Setup example THE NAUTICAM NA-Z8 Underwater Housing The Nauticam NA-Z8 is the most intuitive and reliable underwater housing available for the Nikon Z8.  Building on the successful and field-tested designs for the NA-Z6/7 and Z9 housings the NA-Z8 embodies Nauticam's Mission Control design philosophy placing essential controls within easy reach of the reinforced molded handles. F AND Z MOUNT COMPATIBLE The NA-Z8 underwater housing for the Nikon Z8 utilizes the N120 Port System for Z-mount full-frame lenses. However, the NA-Z8 is also designed to accommodate the use of F-mount lenses, thanks to the FTZ adapter. This allows the same port configuration as found on an F-mount DSLR system like the NA-D6 or NA-D850. The NA-Z8 housing is equipped with convenient lens release buttons for both F and Z mounts, making lens changes a breeze, regardless of the lens platform. You can quickly and easily switch between different lenses without having to remove the camera from the housing, except when installing or removing the FTZ adapter. ENHANCED VIEWFINDERS Electronic viewfinders are constantly achieving higher resolution and better dynamic range and the Z8 features a 3690k-dot OLED 0.5" viewfinder.  Pair the Z8's EVF with Nauticam's Full Frame Enhanced Viewfinders for unrestricted viewing of the entire EVF in either a straight or angled configuration.  The added working distance from the back of the housing makes for a more comfortable and natural position underwater.  Edge to edge visibility and a dioptric adjustment make for easier composition and tack-sharp focus. PREMIUM PROFESSIONAL OPTICS Nauticam's lineup of optics insure the sharpest, most natural looking images underwater whether it's super-macro or wide-angle.  The WACP-1 Wide Angle Conversion Lens works flawlessly with the Nikkor Z 28-75mm f/2.8 lens to deliver an impressive 130º field-of-view at 28mm and 83º at 48mm.  A ~0" minimum focus distance and small front element makes composition and lighting even easier. Those looking for a more compact system can use the new WACP-C with the Sony SEL2870 28-70mm f3.5-5.6 OSS lens plus the Megadap ETZ 21 adapter which delivers full zoom through and a 130º to 59º field-of-view. Want greater than 1:1 magnification with unmatched sharpness?  The SMC-1 and SMC-2 provide 2.2x and 3.6x magnification respectively with the Nikkor Z MC 105mm f/2.8 VR S Macro lens and can be easily mounted with the Nauticam flips system allowing for fast deployment as well as secure and accurate placement of the optic. HDMI OUTPUT The Nikon Z8 promises clean full-resolution HDMI output using an HDMI type A connector and the NA-Z8 features an M24 bulkhead that can accommodate an HDMI 2.0 connection to a monitor/recorder such as the Atomos Ninja5+ in the NA-Ninja5 housing.  INTEGRATED VACUUM CHECK AND LEAK DETECTION SYSTEM The Nauticam vacuum check and leak detection system is shipped with NA-Z8 as standard equipment. Combined with an accessory vacuum valve (NA25624), this monitoring system provides constant updates on the water tight and safe-to-dive status of the housing. A simple color coded LED lighting system lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur.The Nauticam system is temperature compensated, eliminating false alarms caused by a change in outside temperature, or from a camera heating up on an action packed dive.