Float arm Mega M 200 x 95 mm (650 g bouyancy)
Photos show accessories that are not part of your order. Only the content of the tab "What's in the box" is relevant.
on stock
Product number:
IN3960
Available stock:
1
Great buoyancy
The Float Arm uses weather-resistant ABS material for its component arm body to lighten total weight creating extraordinary buoyancy comparing to existing solid arm type float system together with its hollow arm body design. The hollow arm body enables not only helping weight trimming but also provide extra buoyancy.
Wide variety of Float Arm
Float Arm system have line-up total 5 different type; [Float Arm] of standard φ50mm / 2in with three different length and [Mega Float Arm] of 95mm / 3.8in with two different length. New INON Float Arm system including existing [Arm Float S]provides perfect solution to benefit desired underwater weight of your camera system depending on shooting style, conditions.
Secure and stable gripping
The Float Arm is fully compatible with existing INON Arm II system with its high-precision machined aluminum alloy ball joint providing perfect balance between stable clamping and stress-free handling thanks to ozone-proof and weather-proof silicon rubber O-ring. Your INON Arm II system is fully compatible with new Float Arm.
Inon float arm with attachment lens holder (optional)
Inon float arm with hot shoe mount (optional)
| Arm Attachment: | 1-inch ballhead |
|---|---|
| Body Material: | ABS material |
Technical data
- Buoyancy: 650 g
- Weight: 295 g
- Outer diameter: 97 mm
- Full length: 224 vm
- Effective length: 200 mm
- Material: aluminium
- Nominal depth: 70 metres
Scope of delivery
Floating arm Mega M 200 x 95 mm (+650 g) by INON
Login
There aren't any asked questions yet.
on stock
M67 Lens Holder for Float Arm by Inon
€29.00*
A lens holder attached on a Float Arm/Mega Float Arm/Mega Float Tube or on the "M5 Joint" installed on a Stick Arm/Multi Ball Arm (*1) to carry M67 series/28M67 series attachment lens to help comfortable multiple lens handling underwater. The lens holder is screwed on an arm or M5 Joint through center screw hole.
(*1) "Multi Ball Arm SS" is not compatible with the "M5 Joint". "Stick Arm XS-T" and "Multi Ball Arm S" can hold the "M5 Joint" but not compatible with a lens holder.
Bayonet Lens Holder for Inon Float Arms
€85.00*
This adapter mounts to INON arms and provides a secure attachment point for a Bayonet Mount or Bayonet Mount II optic.
Similar products
on stock
Float Arm 90 x 220mm (buoyancy 720g) carbon fiber/aluminum
€180.00*
The Nauticam Carbon Fiber Float Arms series are manufactured from a high quality carbon fiber tubing with molded plastic end caps and machined aluminum balls. O-Ring seals ensure water tight integrity and each arm includes an aluminum spine that ties the entire assembly together, making the arm stronger than one machined from solid aluminum alone. This robust design is why we are able to guarantee these arms' watertightness for life!
NAUTICAM CARBON FIBER FLOAT ARM SYSTEM
One approach that some underwater photographers have taken to lighten the load underwater is through the use of floats made of a special type of foam that compresses less than conventional foam. While this can be a useful option, foam does have its drawbacks. Typical "incompressible" foam blocks begin to noticeably compress at 100' and by 200' have completely lost effectives, and have begun to permanently deform. Foam can also break down over time and make something of a mess. Nauticam Carbon Fiber arms do not measurably compress even at 100 meters/330 feet, and look more streamlined than chunky foam blocks.
Carbon fiber doesn't just look cool. It is five times as strong as steel, yet weighs about two-thirds less. Lighter means more net buoyancy for the same volume. In the 60mm diameter class, for example, the Nauticam arm provides 50% more buoyancy than competitors aluminum tubing arms. The 90mm diameter arms are perfect for systems demanding even more lift.
on stock
Float arm 90 x 170 mm (buoyancy 450 g) carbon fibre/aluminium
€155.00*
The Nauticam Carbon Fiber Float Arms series are manufactured from a high quality carbon fiber tubing with molded plastic end caps and machined aluminum balls. O-Ring seals ensure water tight integrity and each arm includes an aluminum spine that ties the entire assembly together, making the arm stronger than one machined from solid aluminum alone. This robust design is why we are able to guarantee these arms' watertightness for life!
Carbon fiber doesn't just look cool. It is five times as strong as steel, yet weighs about two-thirds less. Lighter weight means more net buoyancy for the same volume.
NAUTICAM CARBON FIBER FLOAT ARM SYSTEM
One approach that some underwater photographers have taken to lighten the load underwater is through the use of floats made of a special type of foam that compresses less than conventional foam. While this can be a useful option, foam does have its drawbacks. Typical "incompressible" foam blocks begin to noticeably compress at 100' and by 200' have completely lost effectiveness, and have begun to permanently deform. Foam can also break down over time and make something of a mess. Nauticam Carbon Fiber arms do not measurably compress even at 100 meters/330 feet, and look more streamlined than chunky foam blocks.
Carbon fiber doesn't just look cool. It is five times as strong as steel, yet weighs about two-thirds less. Lighter weight means more net buoyancy for the same volume.
The Nauticam system of arms, clamps, trays and other mounting hardware allows a huge range of possibilities for arranging lighting.
DIALING IN YOUR BUOYANCY
With a variety of lengths and widths, the Nauticam carbon fiber float arm system lets you dial in the buoyancy you want. Each arm has a clearly rated net buoyancy (lift) and with the wide selection of attachment options, it's finally possible to get your rig perfectly balanced for your shooting style.
on stock
Float arm 70 x 250 mm (buoyancy 520 g) carbon fibre/aluminium
€155.00*
The Nauticam Carbon Fiber Float Arms series are manufactured from a high quality carbon fiber tubing with molded plastic end caps and machined aluminum balls. O-Ring seals ensure water tight integrity and each arm includes an aluminum spine that ties the entire assembly together, making the arm stronger than one machined from solid aluminum alone. This robust design is why we are able to guarantee these arms' watertightness for life!
Carbon fiber doesn't just look cool. It is five times as strong as steel, yet weighs about two-thirds less. Lighter weight means more net buoyancy for the same volume.
NAUTICAM CARBON FIBER FLOAT ARM SYSTEM
One approach that some underwater photographers have taken to lighten the load underwater is through the use of floats made of a special type of foam that compresses less than conventional foam. While this can be a useful option, foam does have its drawbacks. Typical "incompressible" foam blocks begin to noticeably compress at 100' and by 200' have completely lost effectiveness, and have begun to permanently deform. Foam can also break down over time and make something of a mess. Nauticam Carbon Fiber arms do not measurably compress even at 100 meters/330 feet, and look more streamlined than chunky foam blocks.
Carbon fiber doesn't just look cool. It is five times as strong as steel, yet weighs about two-thirds less. Lighter weight means more net buoyancy for the same volume.
The Nauticam system of arms, clamps, trays and other mounting hardware allows a huge range of possibilities for arranging lighting.
DIALING IN YOUR BUOYANCY
With a variety of lengths and widths, the Nauticam carbon fiber float arm system lets you dial in the buoyancy you want. Each arm has a clearly rated net buoyancy (lift) and with the wide selection of attachment options, it's finally possible to get your rig perfectly balanced for your shooting style.
on stock
Float Arm 70 x 300mm (buoyancy 670g) carbon fiber/aluminum
€180.00*
The Nauticam Carbon Fiber Float Arms series are manufactured from a high quality carbon fiber tubing with molded plastic end caps and machined aluminum balls. O-Ring seals ensure water tight integrity and each arm includes an aluminum spine that ties the entire assembly together, making the arm stronger than one machined from solid aluminum alone.
NAUTICAM CARBON FIBER FLOAT ARM SYSTEM
One approach that some underwater photographers have taken to lighten the load underwater is through the use of floats made of a special type of foam that compresses less than conventional foam. While this can be a useful option, foam does have its drawbacks. Typical "incompressible" foam blocks begin to noticeably compress at 100' and by 200' have completely lost effectives, and have begun to permanently deform. Foam can also break down over time and make something of a mess. Nauticam Carbon Fiber arms do not measurably compress even at 100 meters/330 feet, and look more streamlined than chunky foam blocks.
Carbon fiber doesn't just look cool. It is five times as strong as steel, yet weighs about two-thirds less. Lighter means more net buoyancy for the same volume. In the 60mm diameter class, for example, the Nauticam arm provides 50% more buoyancy than competitors aluminum tubing arms. The 90mm diameter arms are perfect for systems demanding even more lift.
The Nauticam system of arms, clamps, trays and other mounting hardware allows a huge range of possibilities for arranging lighting. The addition of the Carbon Fiber Arms allows the underwater shooter even more flexibility in dialing in the exact rig desired.
on stock
Float arm S 150 x 50 mm (+75 g)
€55.00*
Great buoyancy
The Float Arm uses weather-resistant ABS material for its component arm body to lighten total weight creating extraordinary buoyancy comparing to existing solid arm type float system together with its hollow arm body design. The hollow arm body enables not only helping weight trimming but also provide extra buoyancy.
Wide variety of Float Arm
Float Arm system have line-up total 5 different type; [Float Arm] of standard φ50mm / 2in with three different length and [Mega Float Arm] of 95mm / 3.8in with two different length. New INON Float Arm system including existing [Arm Float S]provides perfect solution to benefit desired underwater weight of your camera system depending on shooting style, conditions.
Secure and stable gripping
The Float Arm is fully compatible with existing INON Arm II system with its high-precision machined aluminum alloy ball joint providing perfect balance between stable clamping and stress-free handling thanks to ozone-proof and weather-proof silicon rubber O-ring. Your INON Arm II system is fully compatible with new Float Arm.
Inon float arm with attachment lens holder (optional)
Inon float arm with hot shoe mount (optional)
on stock
Float Arm M 200 x 50 mm (+135 g)
€58.00*
Great buoyancy
The Float Arm uses weather-resistant ABS material for its component arm body to lighten total weight creating extraordinary buoyancy comparing to existing solid arm type float system together with its hollow arm body design. The hollow arm body enables not only helping weight trimming but also provide extra buoyancy.
Wide variety of Float Arm
Float Arm system have line-up total 5 different type; [Float Arm] of standard φ50mm / 2in with three different length and [Mega Float Arm] of 95mm / 3.8in with two different length. New INON Float Arm system including existing [Arm Float S]provides perfect solution to benefit desired underwater weight of your camera system depending on shooting style, conditions.
Secure and stable gripping
The Float Arm is fully compatible with existing INON Arm II system with its high-precision machined aluminum alloy ball joint providing perfect balance between stable clamping and stress-free handling thanks to ozone-proof and weather-proof silicon rubber O-ring. Your INON Arm II system is fully compatible with new Float Arm.
Inon float arm with attachment lens holder (optional)
Inon float arm with hot shoe mount (optional)
on stock
Float arm ML 260 x 50 mm (+210 g)
€69.90*
Great buoyancy
The Float Arm uses weather-resistant ABS material for its component arm body to lighten total weight creating extraordinary buoyancy comparing to existing solid arm type float system together with its hollow arm body design. The hollow arm body enables not only helping weight trimming but also provide extra buoyancy.
Wide variety of Float Arm
Float Arm system have line-up total 5 different type; [Float Arm] of standard φ50mm / 2in with three different length and [Mega Float Arm] of 95mm / 3.8in with two different length. New INON Float Arm system including existing [Arm Float S]provides perfect solution to benefit desired underwater weight of your camera system depending on shooting style, conditions.
Secure and stable gripping
The Float Arm is fully compatible with existing INON Arm II system with its high-precision machined aluminum alloy ball joint providing perfect balance between stable clamping and stress-free handling thanks to ozone-proof and weather-proof silicon rubber O-ring. Your INON Arm II system is fully compatible with new Float Arm.
Inon float arm with attachment lens holder (optional)
Inon float arm with hot shoe mount (optional)
on stock
Float arm Mega S 150 x 95 mm (390 g bouyancy)
€55.00*
Great buoyancy
The Float Arm uses weather-resistant ABS material for its component arm body to lighten total weight creating extraordinary buoyancy comparing to existing solid arm type float system together with its hollow arm body design. The hollow arm body enables not only helping weight trimming but also provide extra buoyancy.
Wide variety of Float Arm
Float Arm system have line-up total 5 different type; [Float Arm] of standard φ50mm / 2in with three different length and [Mega Float Arm] of 95mm / 3.8in with two different length. New INON Float Arm system including existing [Arm Float S]provides perfect solution to benefit desired underwater weight of your camera system depending on shooting style, conditions.
Secure and stable gripping
The Float Arm is fully compatible with existing INON Arm II system with its high-precision machined aluminum alloy ball joint providing perfect balance between stable clamping and stress-free handling thanks to ozone-proof and weather-proof silicon rubber O-ring. Your INON Arm II system is fully compatible with new Float Arm.
Inon float arm with attachment lens holder (optional)
Inon float arm with hot shoe mount (optional)
on stock
Float arm 90 x 200 mm (610 g buoyancy)
€95.00*
Large buoyancy double ball arm with 1 inch ball head connection.
Diameter 9 cm
Length 20 cm
Buoyancy 610 g
Made from CNC machined aluminium and then anodised black sea water resistant.