Strobe Light Holder LF

The INON Z-330 provides powerful Guide Number 33, high performance and multifunction in its compact body. Its built-in optically designed dome lens offering both high power and wide 110 degree coverage underwater without any diffuser which can sacrifice power. For digital cameras, film cameras, optical connection and sync cable connection, the Z-330 strobe supports every camera system with unparalleled features. Dome Lens Provides Both Powerful Light and Underwater 110 degree Coverage Yet lightweight and compact body, the Z-330 is designed to produce powerful G.N. 33 (*1). Precisely designed front dome lens (*2) together with INON's unique patented "T-shape Twin Flash" successfully manages both powerful strobe light without sacrifice any power and circular 110 degree coverage UNDERWATER. Not as like a conventional translucent diffuser which can widen coverage while it has to sacrifice power and store heat inside, this specially designed dome lens diffuses light thanks to reflection ratio of air, acrylic and water to attain UNDERWATER coverage 110 degree with almost all powerful output coming through. Furthermore, the Z-330 has overcame drawback of high-power strobe which has long flash duration and reaches to FULL power after start flashing in significantly short period of time. Together with flashing system in sync with pre-flash and main flash of camera’s built-in flash, the Z-330 can deliver full dump even at 1/1000 high shutter speed setting without cutting power (*1) Measurement in air/ ISO100·m, Nominal value (*2) PAT. P on the dome lens system to widen underwater coverage. (*1) Messung in Luft / ISO100?m, Nennwert (*2) PAT. P auf dem Kuppellinsensystem zur Erweiterung der Unterwasserabdeckung. S-TTL Auto /13 Steps Manual Flash Mode Proven and reliable INON's unique super accurate auto exposure system "S-TTL" Auto mode (patented) is onboard to support easy and solid underwater shooting with appropriate exposure. In addition, optimized high performance slave sensor never miss camera's trigger signal even with faint signal or partially damaged fiber optics cable can still trigger the strobe not to bother you with unstable flashing. Precise 1/2EV. increment 13 steps Manual flash control is onboard as well to support professional use where fine power adjustment is required to provide highly accurate lighting. EV. Controller to Adjust Exposure of S-TTL Auto It is simple to fine-tune flash power in S-TTL Auto by dialing the EV. Control Switch on the back control panel. Adjustable range is 3 steps to increase and 6 steps to decrease. It is easy and simple to suit to your intended exposure or different exposure control characteristics among camera models. Bundled "Strobe Light Shade" to Prevent Shining Camera Lens The "Strobe Light Shade" is bundled as standard accessory to cut a part of strobe light to benefit to dramatically suppress flare or ghost by not shining camera lens directly and backscatter when a strobe is positioned to vicinity or ahead of lens port by blocking light between lens port and subject not to shine suspended particles. The flange part rotates 360 degree. Intuitive operation and comfortable adjustment is supported with light clicks even underwater while you shoot.   220 lumen, Shutter Linked Auto OFF Focus Light The built-in "Shutter-linked Auto-Off Focus Light" delivers 220lm brightness to support when focusing a subject and cease in synch with the shutter release then automatically turns ON again. To aim optical axis of the Focus Light in line with strobe light’s optical axis, the Focus Light has a fresnel lens in front supporting more accurate strobe aiming and improved usability as an aiming light. Conspicuous Phosphorescence Back Panel - Improved Intuitive Control Dials Using white base high-intensity phosphorescence material for the back panel to improve visibility both during day and night dive. Also control dials are enlarged for user-friendly controllability even through thick gloves during cold water diving. The "EV. Control Switch" stops at minimum and maximum power setting telling you current switch position without seeing the switch itself.   Radiation System to Release Generated Heat Inside The Z-330 strobe is equipped with circular metal heatsink carrying high thermal conductivity around light emitting area. The heatsink is directly connected to inner circuit component to release generated heat from strobe usage effectively. Improved heat tolerance has resolved heat problem typically accompanied with powerful strobe. No stress with sudden stop of flashing to cool down. Minimum Recycle Time "approx. 1.6 sec." at Full Flash Minimum recycle time at full flash (how fast the strobe ready lamp shines and the strobe is ready after making full flash) is approx. 1.6 sec.(*3) achieving fast recycle time even delivers powerful light. (*3) With recommended Panasonic "eneloop pro", BK-HCD, 1.2V, Min.2,500mAh. Recycle time based on INON test data. Wide Variety of Dome Filters The Z-330 strobe has a bayonet system to hold a strobe dome filter to attach/remove easily. Besides bundled "Strobe Dome Filter SOFT" to protect dome lens surface and soften strobe light, optional "Strobe Dome Filter ND" which steps down at -4EV, "Strobe Dome Filter [4600K]" which changes native color temperature to 4600K and "Strobe Dome Filter [4900K]" which changes to 4900K will be available in 2018. Both Optical/Electrical Trigger Supported Optical connection system widely supports from underwater housings for compact digital cameras to a digital SLR housings with built-in flash or SLRs housing with built-in LED trigger circuitry regardless of make or model. The strobe is equipped with Nikonos 5 pin type cable compatible sync connector to shoot in TTL Auto mode with a film camera or in Manual mode for a digital SLR housing with a bulk head (*4). (*4) Usable function may vary depending on camera system and connection method On-board Wireless TTL The high sensitive slave sensor enables wireless S-TTL Auto mode using a mirror instead of an optical cable. Attaching optional Wireless Connection Kit on the Z-330 and combined with an underwater housing via Shoe Base Set or Grip Base D4 Set creates a handy S-TTL Auto shooting set. * Not compatible with camera's on-board wireless system such as Olympus wireless RC flash system or Nikon creative lighting system as wireless flash system differs. Integral Pre-flash Mode Detecting Function Fully compatible with a camera which alters number of pre-flash between once or twice making total flashes twice or three times depending on shooting condition. The Z-330 automatically detects number of pre-flash to activate adequate program to support proper functioning of Manual as well as highly accurate S-TTL Auto mode. INON unique Advanced Cancel Circuit benefits you with faster recycle time and more images per battery set to eliminate drawbacks when using Manual Flash mode with a pre-flash type digital camera where the built-in flash always burst full dump.  

Following the latest features of the Z-330 flash, the D-200 underwater flash is designed for a maximum guide number of 20 and an optical trigger system. The built-in dome lens is optically designed to provide wide 110-degree underwater coverage without a diffuser that can affect performance. High performance, multi-functionality and user-friendly handling with the lightest underwater weight support your underwater photography with superior Performance. Extended underwater coverage 110 degrees through dome lens The precisely designed front dome (*1) together with INON's unique patented "T-Shape Twin Flash" successfully creates both a strong guide number of 20 (*2) and circular 110 degree coverage underwater without sacrificing power. Without the use of a diffuser, the D-200 flash is well designed to deliver high power and wide coverage. Unlike a conventional translucent diffuser that can widen coverage while blocking some of the power and trapping heat inside, this specially designed dome lens diffuses light thanks to the reflective ratio of air, acrylic and water to achieve 110 degrees of UNDERWATER coverage with almost all of the powerful output passing through it. In addition, the D-200 has overcome the disadvantage of the high-power flash, which has a long flash duration and reaches full power in a significantly short time after starting the flash. Together with the flash system synchronised with the pre-flash and main flash of the camera's built-in flash, the D-200 can deliver full power even at a high shutter speed of 1/1000 without reducing output. (*1) PAT. P on the dome lens system to extend underwater coverage. (*2) Measurement in air / ISO100?m, nominal value.   Easy to handle under water, buoyancy only 4 grams The D-200 strobe light provides buoyancy at 4 g (*3) underwater, including 4 x AA eneloop batteries and Strobe Light Shade, making the strobe light easily buoyant underwater. By attaching an adapter such as "Z Adapter MV" or "Z Joint", the buoyancy can be almost neutral in salt water. (*3) The buoyancy measured in fresh water is about 4g. The calculated buoyancy in seawater is about 23g. Includes 4 x "eneloop" batteries and Strobe Light Shade. S-TTL automatic /13 power levels in manual flash mode Proven and reliable INON's unique, super-accurate automatic exposure system "S-TTL" Auto mode (patented) is on board to support simple and solid underwater photography with balanced exposure. What's more, even if the signal is weak or the fibre optic cable is partially damaged, the optimised, high-performance slave sensor never misses the camera's trigger signal so as not to hinder you with fickle flashes. Manual flash control with precise 1/2 f-stops is also built in to support professional use when fine-tuning of power is required for high-precision lighting. Power controller for setting the exposure of the S-TTL automatic system Fine-tuning the flash output in S-TTL auto mode is easy by selecting EV. control switch on the back of the control panel. The setting range can be increased in 3 steps and decreased in 6 steps. It is simple and straightforward to adjust to the intended exposure or the different exposure control characteristics of different camera models. Bundled "flash baffle" to prevent illuminated camera lens The "flash hood" (included) "cuts off" a portion of the flash light to dramatically reduce flash or ghosting by not directly illuminating the camera lens. It also prevents floating particles when a flash is positioned near or in front of the lens port, as the water between the port and the subject is less illuminated. The flange part can be rotated 360 degrees. Intuitive operation and comfortable adjustment is supported by easy clicks even under water during shooting.   Trigger-coupled auto OFF focus light with 220 lumens The built-in "Shutter-linked Auto-Off Focus Light" provides 220 lumens of brightness that assists the camera in focusing on a subject and stops in sync with the shutter release, then automatically turns back on. To align the optical axis of the focusing light with the optical axis of the flash, the focusing light has a Fresnel lens in front of it, which supports more accurate aiming of the flash and better usability as an aiming light. Eye-catching fluorescent back panel - Improved intuitive controls Use of high-intensity white-based phosphorescent material for the back panel to improve visibility during both day and night dives. The control buttons are also enlarged to allow user-friendly control even through thick gloves when cold-water diving. The "EV. Control Switch" stops at the minimum and maximum power setting and shows you the current switch position without seeing the switch itself. Radiation System for releasing the generated heat inside The D-200 underwater flash is equipped with a circular metal heat sink that has high thermal conductivity around the light-emitting surface. The heat sink is directly connected to the inner circuit component to effectively dissipate the heat generated when using the underwater flash. Improved heat tolerance has solved the heat problem normally associated with a powerful underwater flash. No stress with sudden stop of the flash to cool down. Minimum recycling time "approx. 1.6 sec." at full flash output The minimum repetition time at full flash (how quickly the flash-ready lamp lights up and the flash is ready after full flash) is approx. 1.6 sec(*3), giving a fast repetition time that even provides strong light. (*3) With recommended Panasonic "Eneloop Pro", BK-HCD, 1.2V, Min.2.500mAh. Recycling time based on INON test data. Large selection of dome filters The Z-330 underwater flash has a bayonet system to accept a dome flash filter, which is easy to attach/remove. In addition to the bundled "Strobe Dome Filter SOFT" for protecting the dome lens surface and softening the flash, the "Strobe Dome Filter ND", which drops at -4EV, the "Strobe Dome Filter [4600K]", which changes the native colour temperature to 4600K, and the "Strobe Dome Filter [4900K]", which changes to 4900K, are optionally available. Simple yet secure optical cable connection The INON optical connection system is flood-free and provides a simple but reliable connection between flash unit and camera system, including compact digital camera housings, housings for digital SLR cameras with built-in flash or SLR housings with built-in LED trigger circuit, regardless of brand or model. Integrated wireless TTL The high-sensitivity slave sensor enables wireless S-TTL auto mode using a mirror instead of an optical cable. Attaching the optional wireless connection kit to the D-200 and combining it with an underwater housing via the Shoe Base or Grip Base Set D4 creates a practical S-TTL auto shooting kit. * Not compatible with the camera's wireless on-board system such as Olympus' wireless RC flash system or Nikon's creative lighting system as the wireless flash system is different. Integrated pre-flash mode detection function Fully compatible with a camera that changes the number of pre-flashes between once and twice, and flashes two or three times in total depending on the shooting condition. The D-200 automatically detects the number of pre-flashes to activate a suitable programme that supports both manual and high-precision S-TTL auto modes. The unique INON Advanced Cancel Circuit benefits you with faster recycle time and more images per set of batteries to eliminate disadvantages when using manual flash mode with a digital camera with pre-flash, where the built-in flash always fires at full.

Max. 2400 lumen 12 Power Setting Powerful Underwater Light for Wide Imaging Maximum 2400 lumen and 12 steps power setting controlled by user-friendly rotary switches. An optically designed dome lens delivers super wide 100 degree coverage underwater supporting capturing wide scene. The torch runs on 6 x AA batteries stored in a cylindrical cartridge making overhaul size compact. Powerful lighting source supports you as a handheld light or as serious lighting device for photography/videography. The rotary switch on the back end of the unit controls ON/OFF and power setting over between[FULL]/[LOW]. The "Selector Ring LF" (red ring switch) on the light head provides each 6 steps power setting for FULL and LOW making 12 steps power setting in total. The maximum power is 2400 lumen at level 6 of FULL mode. The LOW mode is about -1.5EV of the FULL mode. Each click of the "Selector Ring LF" provides about 1.0EV increments (FULL) or about 0.9EV (LOW). The rotary switch is equipped with a lock ring to prevent accidental activation of the light. Underwater coverage is super wide 100 degree thanks to the optically designed dome lens which effectively widen LED beam without sacrificing native brightness from LED modules. Using optical dome lens provides ideal light distribution for video shooters with its seamless gradation and less spotting on the center. Ideal lighting device for aiming or macro imaging thanks to carefully selected white LED chip producing quality light with enhanced color reproducibility and color temperature 6500K. perated by easily obtainable 6x AA batteries. Using compatible rechargeable batteries like "eneloop" or "eneloop pro" enables you to share same battery charger with an INON strobe to enhance mobility and minimize your luggage space. The rated practical burn time (*) with "eneloop pro" (BK-3HCD) rechargeable batteries, is approx. 45 minutes at level 6 of FULL mode (max. power setting) or approx. 3,185 minutes (53 hrs 05 min) at level 1 of LOW mode (minimum power setting). (*) Average time to get half brightness comparing to initial performance when using "eneloop pro" batteries (Model code: BK-3HCD).

The INON Z-330 provides powerful Guide Number 33, high performance and multifunction in its compact body. Its built-in optically designed dome lens offering both high power and wide 110 degree coverage underwater without any diffuser which can sacrifice power. For digital cameras, film cameras, optical connection and sync cable connection, the Z-330 strobe supports every camera system with unparalleled features. Dome Lens Provides Both Powerful Light and Underwater 110 degree Coverage Yet lightweight and compact body, the Z-330 is designed to produce powerful G.N. 33 (*1). Precisely designed front dome lens (*2) together with INON's unique patented "T-shape Twin Flash" successfully manages both powerful strobe light without sacrifice any power and circular 110 degree coverage UNDERWATER. Not as like a conventional translucent diffuser which can widen coverage while it has to sacrifice power and store heat inside, this specially designed dome lens diffuses light thanks to reflection ratio of air, acrylic and water to attain UNDERWATER coverage 110 degree with almost all powerful output coming through. Furthermore, the Z-330 has overcame drawback of high-power strobe which has long flash duration and reaches to FULL power after start flashing in significantly short period of time. Together with flashing system in sync with pre-flash and main flash of camera’s built-in flash, the Z-330 can deliver full dump even at 1/1000 high shutter speed setting without cutting power (*1) Measurement in air/ ISO100·m, Nominal value (*2) PAT. P on the dome lens system to widen underwater coverage. (*1) Messung in Luft / ISO100?m, Nennwert(*2) PAT. P auf dem Kuppellinsensystem zur Erweiterung der Unterwasserabdeckung. S-TTL Auto /13 Steps Manual Flash Mode Proven and reliable INON's unique super accurate auto exposure system "S-TTL" Auto mode (patented) is onboard to support easy and solid underwater shooting with appropriate exposure. In addition, optimized high performance slave sensor never miss camera's trigger signal even with faint signal or partially damaged fiber optics cable can still trigger the strobe not to bother you with unstable flashing. Precise 1/2EV. increment 13 steps Manual flash control is onboard as well to support professional use where fine power adjustment is required to provide highly accurate lighting. EV. Controller to Adjust Exposure of S-TTL Auto It is simple to fine-tune flash power in S-TTL Auto by dialing the EV. Control Switch on the back control panel. Adjustable range is 3 steps to increase and 6 steps to decrease. It is easy and simple to suit to your intended exposure or different exposure control characteristics among camera models. Bundled "Strobe Light Shade" to Prevent Shining Camera Lens The "Strobe Light Shade" is bundled as standard accessory to cut a part of strobe light to benefit to dramatically suppress flare or ghost by not shining camera lens directly and backscatter when a strobe is positioned to vicinity or ahead of lens port by blocking light between lens port and subject not to shine suspended particles. The flange part rotates 360 degree. Intuitive operation and comfortable adjustment is supported with light clicks even underwater while you shoot. 220 lumen, Shutter Linked Auto OFF Focus Light The built-in "Shutter-linked Auto-Off Focus Light" delivers 220lm brightness to support when focusing a subject and cease in synch with the shutter release then automatically turns ON again. To aim optical axis of the Focus Light in line with strobe light’s optical axis, the Focus Light has a fresnel lens in front supporting more accurate strobe aiming and improved usability as an aiming light. Conspicuous Phosphorescence Back Panel - Improved Intuitive Control Dials Using white base high-intensity phosphorescence material for the back panel to improve visibility both during day and night dive. Also control dials are enlarged for user-friendly controllability even through thick gloves during cold water diving. The "EV. Control Switch" stops at minimum and maximum power setting telling you current switch position without seeing the switch itself. Radiation System to Release Generated Heat Inside The Z-330 strobe is equipped with circular metal heatsink carrying high thermal conductivity around light emitting area. The heatsink is directly connected to inner circuit component to release generated heat from strobe usage effectively. Improved heat tolerance has resolved heat problem typically accompanied with powerful strobe. No stress with sudden stop of flashing to cool down. Minimum Recycle Time "approx. 1.6 sec." at Full Flash Minimum recycle time at full flash (how fast the strobe ready lamp shines and the strobe is ready after making full flash) is approx. 1.6 sec.(*3) achieving fast recycle time even delivers powerful light. (*3) With recommended Panasonic "eneloop pro", BK-HCD, 1.2V, Min.2,500mAh. Recycle time based on INON test data. Wide Variety of Dome Filters The Z-330 strobe has a bayonet system to hold a strobe dome filter to attach/remove easily. Besides bundled "Strobe Dome Filter SOFT" to protect dome lens surface and soften strobe light, optional "Strobe Dome Filter ND" which steps down at -4EV, "Strobe Dome Filter [4600K]" which changes native color temperature to 4600K and "Strobe Dome Filter [4900K]" which changes to 4900K will be available in 2018. Both Optical/Electrical Trigger Supported Optical connection system widely supports from underwater housings for compact digital cameras to a digital SLR housings with built-in flash or SLRs housing with built-in LED trigger circuitry regardless of make or model. The strobe is equipped with Nikonos 5 pin type cable compatible sync connector to shoot in TTL Auto mode with a film camera or in Manual mode for a digital SLR housing with a bulk head (*4). (*4) Usable function may vary depending on camera system and connection method On-board Wireless TTL The high sensitive slave sensor enables wireless S-TTL Auto mode using a mirror instead of an optical cable. Attaching optional Wireless Connection Kit on the Z-330 and combined with an underwater housing via Shoe Base Set or Grip Base D4 Set creates a handy S-TTL Auto shooting set. * Not compatible with camera's on-board wireless system such as Olympus wireless RC flash system or Nikon creative lighting system as wireless flash system differs. Integral Pre-flash Mode Detecting Function Fully compatible with a camera which alters number of pre-flash between once or twice making total flashes twice or three times depending on shooting condition. The Z-330 automatically detects number of pre-flash to activate adequate program to support proper functioning of Manual as well as highly accurate S-TTL Auto mode. INON unique Advanced Cancel Circuit benefits you with faster recycle time and more images per battery set to eliminate drawbacks when using Manual Flash mode with a pre-flash type digital camera where the built-in flash always burst full dump.