Front Cover 110
Photos show accessories that are not part of your order. Only the content of the tab "What's in the box" is relevant.
on stock
Product number:
IN8989
Available stock:
3
A cover to protect front dome lens of INON Z-330 / D-200 strobe. Designed to fit to the strobe with “Strobe Light Shade” being attached. Usable underwater as the cover is made of neoprene as same as wetsuits. Also usable for an INON wide lens attached with a lens hood.
| Body Material: | Neoprene |
|---|
Technical data
Material: Neopren
Scope of delivery
Front Cover 110 by INON
Login
There aren't any asked questions yet.
Dome Lens Unit II for UWL-S100 ZM80
Dedicated super dome option for UWL-S100 ZM80 wide conversion lens to increase underwater view angle by simply attached it on the compatible wide conversion lens to provide "more wide angle image" and "more close-up image" comparing to sole use of the UWL-S100 ZM80 underwater.
Maximum angle of view underwater is [149.8°] with "UWL-S100 ZM80" wide conversion lens .
Unique optical design allows to shorten minimum focal distance with super wide view angle thus effective for ultra wide macro imaging and capturing clear image even in poor visibility condition.
The Dome Lens Unit II is specially designed for the UWL-S100 ZM80 wide conversion lens making it compact and lightweight.
Its optical glass has anti-reflection multi-coating and antifouling coating on its inner surface to suppress flare and ghost and enhance durability while outer surface has hard coating to prevent accidental scratches.
The packaged protector shades unnecessary light to get clear image in addition to prevent accidental damage on the lens surface.
Usage of the Dome Lens Unit II for UWL-S100 ZM80
*This product cannot be used by itself and must be used with compatible INON wide conversion lens.
*As same as using UWL-S100 ZM80 itself, set to zoom position 80mm (35mm film equivalent) until no vignetting is observed. Do not zoom beyond necessity as it will sacrifice view angle not to appreciate optimal performance of the lens.
*Generally, set Macro Mode to [ON]. However, for some cameras, depending on the particular focus range and aperture capabilities, some subjects at farther distances may not be in focus. In such cases, set Macro Mode to [OFF].
on stock
UFL-G140 SD Underwater Semi-fisheye Conversion Lens
€299.00*
Ultra Wide Even Underwater
Though an action camera is equipped with ultra wide lens, its coverage underwater will dramatically narrow down due to different refraction ratio between air and water.
For example, maximum angle of view of GoPro® HERO10 Black is approx. 151° on land which will narrow down to approx. 94° when we put the camera in genuine dive housing and bring it underwater due to different refraction index. The INON UFL-G140 SD provides ultra wide semi-fisheye imaging with angle of view 140° underwater enabling wild underwater video work only with action cameras.
* Measured angle of view by INON or calculated angle of view underwater based on the measured angle of view. Not confirmed by camera manufacture. The measured angle of view of “HERO3+ Silver Edition” is approx. 142°(air) which is less wide than the “Black Edition”. So angle of view underwater with this lens is less than 140°. The “HERO3+ White Edition” has not been tested.
Dynamic CFWA Imaging
Shooting through the INON UFL-G140 SD lens enables you to shoot a subject at close range to benefit deformed and/or perspective result.
The native depth of field (DoF) of the GoPro® HERO10 Black on land is approx. 60cm/2ft to 8. With the INON UFL-G140 SD, DoF underwater will be extended to 4cm/1.6in to 8 closer to camera side.
* DoF on land is based on focal length/aperture of camera lens and pixel pitch of the image sensor. DoF underwater is measured from "the forefront of the lens".