XD Lens Holder M5

Great buoyancy The Float Arm uses weather-resistant ABS material for its component arm body to lighten total weight creating extraordinary buoyancy comparing to existing solid arm type float system together with its hollow arm body design. The hollow arm body enables not only helping weight trimming but also provide extra buoyancy. Wide variety of Float Arm Float Arm system have line-up total 5 different type; [Float Arm] of standard φ50mm / 2in with three different length and [Mega Float Arm] of 95mm / 3.8in with two different length. New INON Float Arm system including existing [Arm Float S]provides perfect solution to benefit desired underwater weight of your camera system depending on shooting style, conditions. Secure and stable gripping The Float Arm is fully compatible with existing INON Arm II system with its high-precision machined aluminum alloy ball joint providing perfect balance between stable clamping and stress-free handling thanks to ozone-proof and weather-proof silicon rubber O-ring. Your INON Arm II system is fully compatible with new Float Arm. Inon float arm with attachment lens holder (optional) Inon float arm with hot shoe mount (optional)  

Great buoyancy The Float Arm uses weather-resistant ABS material for its component arm body to lighten total weight creating extraordinary buoyancy comparing to existing solid arm type float system together with its hollow arm body design. The hollow arm body enables not only helping weight trimming but also provide extra buoyancy. Wide variety of Float Arm Float Arm system have line-up total 5 different type; [Float Arm] of standard φ50mm / 2in with three different length and [Mega Float Arm] of 95mm / 3.8in with two different length. New INON Float Arm system including existing [Arm Float S]provides perfect solution to benefit desired underwater weight of your camera system depending on shooting style, conditions. Secure and stable gripping The Float Arm is fully compatible with existing INON Arm II system with its high-precision machined aluminum alloy ball joint providing perfect balance between stable clamping and stress-free handling thanks to ozone-proof and weather-proof silicon rubber O-ring. Your INON Arm II system is fully compatible with new Float Arm. Inon float arm with attachment lens holder (optional) Inon float arm with hot shoe mount (optional)

The M5 Joint is an optional product to attach a Lens Holder for Float Arm (*2) or the Shoe Base (via Shoe Base Spacer) on a Stick Arm or Multi Ball Arm (*1).   (*1) Unable to attach on the "Multi Ball Arm SS". (*2) "Stick Arm XS-T" and "Multi Ball Arm S" is only compatible with the "Shoe Base Spacer" but not compatible with a lens holder.

Great buoyancy The Float Arm uses weather-resistant ABS material for its component arm body to lighten total weight creating extraordinary buoyancy comparing to existing solid arm type float system together with its hollow arm body design. The hollow arm body enables not only helping weight trimming but also provide extra buoyancy. Wide variety of Float Arm Float Arm system have line-up total 5 different type; [Float Arm] of standard φ50mm / 2in with three different length and [Mega Float Arm] of 95mm / 3.8in with two different length. New INON Float Arm system including existing [Arm Float S]provides perfect solution to benefit desired underwater weight of your camera system depending on shooting style, conditions. Secure and stable gripping The Float Arm is fully compatible with existing INON Arm II system with its high-precision machined aluminum alloy ball joint providing perfect balance between stable clamping and stress-free handling thanks to ozone-proof and weather-proof silicon rubber O-ring. Your INON Arm II system is fully compatible with new Float Arm. Inon float arm with attachment lens holder (optional) Inon float arm with hot shoe mount (optional)  

Great buoyancy The Float Arm uses weather-resistant ABS material for its component arm body to lighten total weight creating extraordinary buoyancy comparing to existing solid arm type float system together with its hollow arm body design. The hollow arm body enables not only helping weight trimming but also provide extra buoyancy. Wide variety of Float Arm Float Arm system have line-up total 5 different type; [Float Arm] of standard φ50mm / 2in with three different length and [Mega Float Arm] of 95mm / 3.8in with two different length. New INON Float Arm system including existing [Arm Float S]provides perfect solution to benefit desired underwater weight of your camera system depending on shooting style, conditions. Secure and stable gripping The Float Arm is fully compatible with existing INON Arm II system with its high-precision machined aluminum alloy ball joint providing perfect balance between stable clamping and stress-free handling thanks to ozone-proof and weather-proof silicon rubber O-ring. Your INON Arm II system is fully compatible with new Float Arm. Inon float arm with attachment lens holder (optional) Inon float arm with hot shoe mount (optional)  

"XD Mount" makes it easy The newly developed " XD Mount " enables one-touch lens attachment and removal. The "XD Mount" has high durability, thin design not to spoil optical performance of the lens, lock function to prevent slipping off. Using the " XD Mount " on housing enables you to attach and remove a lens at once. Compact and Handy Compact size with 90mm outer diameter and 48.5mm length makes it easy to carry around. Thanks to the thin "XD Mount" design which does not sacrifice lens optical performance, the overall set size remains compact when attached on a housing. Dual use land/underwater Maximum view angle underwater is 95° which gets widen to 159° when using on land providing fisheye images without complicated and expensive gears. Super wide Option Optional Dome Lens Unit IIIA, Dome Lens Unit IIIG widens original view angle to approx. 141°. Newly designed optics provides quality underwater images Totally renewed optical design effectively suppresses flare/ghost even in backlit condition to provide sharp and high quality image together with optimal lens positioning relative to camera master lens. Minimum Focusing Distance 0 cm A subject just in front of the lens or distant seascape never get out of focus. The lens won’t limit shooting distance. Usable with All Zoom Range Unlike conventional wide conversion lenses, which are recommended to be used only at zoom wide end as zooming results in poor image quality in peripheral areas, this lens manages to keep high quality image regardless of camera's zoom setting. Optical Anti-Reflection Coating (AR-Coating) All component lenses are finished with optical anti-reflective coating, which thoroughly suppresses flare and ghosting providing stable image quality in backlit scenes where flare and ghosting are likely to occur.

A close-up lens that offers comfortable high magnification and a longer working distance to easily fill the light. The lens has been specifically designed for underwater use to achieve high image quality and a particularly compact body with the HR lens. The UCL-90 is suitable as a macro lens for both full-frame SLR systems and compact digital cameras. Compatible lenses: 60mm-100mm macro lens for full frame SLRs (*1) 40mm-60mm macro lens exclusively for APS-C (*1) 45mm-60mm macro lens (*1), standard zoom lens (*2) for Micro Four Thirds Compact digital camera with maximum optical zoom 5x or less (*2) (*1) Vignetting may occur in housing systems where the distance between the main lens of the camera and the surface of the port, or between this product and the port, is very large. (*2) The usable zoom range is between 60 mm and 100 mm (35 mm film equivalent). Outside this range, there is vignetting at wide angle and poorer image quality at telephoto. High magnification with a focal length of 90 mm (+11 diopters). The maximum magnification when using this lens with a 100 mm macro lens for a full-frame SLR system is x2.23 (area ratio x4.98) (*3), which is an intermediate performance between "UCL-67" (+15 diopters) and "UCL-165" (+6 diopters). The UCL-67 offers high magnification and a long working distance at the same time. When used with a 100 mm macro lens for SLR cameras, the working distance is 69 mm at minimum focal length (*3). Together with its compact size, the lens provides friendly illumination even at minimum focusing distance. (*3) When used with the AF-S VR Micro-Nikkor 105mm f/2.8G IF-ED. Designed exclusively for underwater use, the lens effectively suppresses aberrations throughout the focal range to deliver sharp, high-contrast images even at close shooting distances. (*4). (*4) This lens is designed for underwater use only. When used on land, the subject will not be enlarged and distortion will occur at the edges of the image or vignetting, etc. The use of HR glass makes the lens compact and suitable for a wide range of camera systems, from 100mm macro SLR lenses to compact digital cameras (*5). The compact lens body also means there are fewer lighting restrictions, so you can use a variety of lighting techniques. (*5) The usable zoom range is between 60 mm and 100 mm (35 mm film equivalent). Beyond this range, there is vignetting in the wide-angle range and poorer image quality in the telephoto range. The lens consists of 3 elements in 2 groups and effectively suppresses chromatic aberration by using an achromatic lens inside. An anti-reflective coating on all lens surfaces also suppresses flare/glare. The optional "Lens Adapter Ring for UCL-67" attaches to the M65 thread of the UCL-67 and allows the INON M67 series "UCL-165M67"/"UCL-330" to be stacked on the front of the UCL-67 for even higher magnification for super macro photography. (*6) (*6) Other close-up lenses with higher magnification, such as "UCL-67 M67","UCL-90 M67" or "UCL-100M67", are not recommended due to deterioration of image quality. The lens mount is the versatile "XD Mount" bayonet mount.

Great buoyancy The Float Arm uses weather-resistant ABS material for its component arm body to lighten total weight creating extraordinary buoyancy comparing to existing solid arm type float system together with its hollow arm body design. The hollow arm body enables not only helping weight trimming but also provide extra buoyancy. Wide variety of Float Arm Float Arm system have line-up total 5 different type; [Float Arm] of standard φ50mm / 2in with three different length and [Mega Float Arm] of 95mm / 3.8in with two different length. New INON Float Arm system including existing [Arm Float S]provides perfect solution to benefit desired underwater weight of your camera system depending on shooting style, conditions. Secure and stable gripping The Float Arm is fully compatible with existing INON Arm II system with its high-precision machined aluminum alloy ball joint providing perfect balance between stable clamping and stress-free handling thanks to ozone-proof and weather-proof silicon rubber O-ring. Your INON Arm II system is fully compatible with new Float Arm. Inon float arm with attachment lens holder (optional) Inon float arm with hot shoe mount (optional)

“XD Mount" for one-touch lens attachment and removal The newly developed "XD Mount" enables one-touch lens attachment and removal. The "XD Mount" on a lens provides high durability, thin design without compromising lens optical performance and speedy lens attachment/removal in combination with XD Mount on housing side which has reasonable price and anti-slip lock function. Features The UCL-67 XD underwater close-up lens is designed to deliver high magnification yet superior image quality best suited to full frame SLR macro lenses of focal length 60mm - 100mm with comfortable long working distance enabling easy lighting. The lens also supports mirrorless as well as compact system. Compatible Lens A telephoto macro lens with a minimum focus distance longer than 20cm is recommended (*1)(*2) Using short minimum focus distance lenses will reduce the magnification. (*1) Vignetting may be observed depends on the distance between master lens and lens port glass and/or UCL-67 and lens port glass. (*2) Only usable when the focal length is between 60mm and 100mm range at 35mm film equivalent. Beyond this range, there will be vignetting at the wide side and deteriorated image quality at the telephoto side. CANON RF100mm F2.8 L MACRO IS USM without close-up lens CANON RF100mm F2.8 L MACRO IS USM with UCL-67 XD   Powerful magnification with underwater focal length 67mm (+15 diopter). Maximum magnification of the UCL-67 with range of 100mm macro lens for full frame SLR is 2.76x (area ratio: 7.65x) at the minimum focusing distance. (*3)   While the UCL-67 delivers high magnification, it still offers long working distance. When using with 100mm range macro lens for SLR, working distance is 52mm (83.4mm from housing port surface) at minimum focusing distance (*3). Together with its compact size, the lens supports friendly lighting even at minimum focusing distance. (*3) When using for AF-S VR Micro-Nikkor 105mm f/2.8G IF-ED. The lens is consists of 4 elements in 3 groups using high refractive index glass to accommodate with a macro lens for full-frame digital SLR with compact body yet delivering high magnification and superior image quality.   Employing achromatic lens effectively suppresses chromatic aberration and anti-reflection coating on all surfaces suppresses flare/ghost. Designed sole use underwater to provide effectively suppressed aberrations in all focal range and unparalleled high quality image on any supported shooting range. (*4) (*4) This lens is designed for underwater use only. Using on land will have less magnification, distortion, vignetting etc.   Optional "Lens Adapter Ring for UCL-67/90" is attached on the front end of the UCL-67 lens barrel allowing to stack INON M67 series, "UCL-165M67"/"UCL-330" to support even higher magnification for super macro imaging needs. (*5) (*5) Other higher magnification close-up lens, "UCL-67 M67", "UCL-90 M67" and "UCL-100M67"are not usable as those combinations will have significantly degrade image Quality.

“XD Mount" for one-touch lens attachment and removal The newly developed "XD Mount" enables one-touch lens attachment and removal. The "XD Mount" on a lens provides high durability, thin design without compromising lens optical performance and speedy lens attachment/removal in combination with XD Mount on housing side which has reasonable price and anti-slip lock function. A high magnification close-up lens providing 165mm focal length (+6 diopter) where 165mm shooting distance from lens surface when camera’s focus position is set to infinity. Using minimum focusing distance will shorten minimum focus distance allowing you to get closer to a subject enabling high magnification close-up photography. Dual use underwater/land and usable with all zoom range. Even at same shooting distance, it is easy to capture a subject at desired size by adjusting zoom setting.