The housing for Sony Cyber-shot RX100 Mark V / RX100 Mark VA allows to capitalize on the camera full potential and to capture amazing pictures underwater. Product details An easy to use, highly professional product has been created through techniques and innovations gained from years of experience. The housing for  Sony Cyber-shot RX100 Mark V / RX100 Mark VA perfect handling by means of an adjustable strips. Easy access to all key/main camera controls by means of clearly labelled laser-engraved longlasting buttons. An easy and quick release camera mounting plate allows the camera positioning; the back door has a large window for a fine camera display view and it is entirely detached from the front body to make easier the camera fitting. ONE HAND OPEN/CLOSE It's very easy to open and close Sony Cyber-shot RX100 Mark V / RX100 Mark VA, without any efforts by the user thanks to the side helicoid screw and the bottom centered pins; the camera is placed easily into the housing on a sliding tray that keeps the camera robustly in place. A lever locks the tray safely inside the housing. The housing stands with great stability due to sturdy and wide rubber feet located on the bottom. PORT, CLOSE-UP AND WIDE-ANGLE LENSES Front portholes are built with high quality standards of materials to ensure a perfect image quality. A removable flat port is fitted thanks to markers and a bayonet connection to Sony Cyber-shot RX100 Mark V / RX100 Mark VA housing. A M67 threaded end allows the use of additional wet wide angle lenses and macro lenses.  LIGHTING Sony Cyber-shot RX100 Mark V / RX100 Mark VA own strobe lighting can be used fitting an outside diffuser on the porthole. For better performance with wide angle lenses, one or two external strobes can be connected by optical fiber using the adaptor included. CONSTRUCTION AND SAFETY Only the best materials are used to manufacture our housings such anodized aluminum which is anticorodal and thermo-coated and stainless steel. A longlasting product that requires easy and simple maintenance by the user. So small and so rich in technology! Dual high precision and quality O-Ring seals protect and ensure a perfect and secure watertight for all movable and / or removable parts; a red alarm for humidity/water inside the housing is powered by a battery replaceable by the user. Working depth is 100 metres. An hole positioned on the bottom allows to secure the housing for Sony Cyber-shot RX100 Mark V / RX100 Mark VA with a line/strap. Different accessories can be fitted by means of an upper sliding tray and double threaded M6 holes and one 1/4W on the bottom. Controls ON/OFF of Sony Cyber-shot RX100 Mark V / RX100 Mark VA Own camera strobe open/close Ergonomic camera focusing and shutter button for an easy use with gloves Shutter speed priority Lens aperture Highlights  All Sony Cyber-shot RX100 Mark V / RX100 Mark VA key main controls M16x1 hole for vacuum system or external monitor Easy one hand housing open/close Moisture sensor Double high precision and quality O-Ring seals

Are you looking for adrenaline even underwater and have you relied on GoPro to tackle demanding challenges? Trust us, we give you the best in terms of safety, quality and challenges. Our housing will be able to follow you up to 200 meters deep even in the coldest waters or adverse condition to show you the unexplored. Product details Isotta Underwater Housing GoPro Hero 9 Black and GoPro Hero 10 With the two raised buttons on the case, you can manage all the functions of the actioncam quickly and easily even with gloves. The two displays on the GoPro are perfectly visible thanks to the large openings protected by scratch-resistant methacrylate, shaped on the shape of the screens, and a removable rear lens hood that ensures optimal viewing of the display in any light condition or situation. ONE HAND OPEN/CLOSE The quick opening with one hand allows you to be operational in a few minutes; the rear cap detaches completely from the front body, so the inserting of the GoPro is free of obstacle. PORT The flat port on the housing have the same size of the original GoPro Hero 9 Black housing, so that you can use all the original and universal accessories. CONSTRUCTION AND SAFETY The materials used for the construction and assembly of the housing are of high quality such as anticorodal anodized aluminum and stainless steel. The double O-rings guarantee the hermetic seal of all the moving and removable parts of the housing up to a guaranteed depth of 200 meters. An hole located at the bottom allows you to secure the case with a safety strap. An upper slide and two different holes, one M6 and one 1/4 W, on the bottom support the use of various accessories. Controls Shutter button; Mode button ON and OFF Highlights All GoPro Hero9/Hero10/Hero11 key main controls Easy one hand housing open/close Double high precision and quality O-Ring seals

The housing for Sony Cyber-shot RX100 Mark VI / RX100 Mark VII allows to capitalize on the camera full potential and to capture amazing pictures underwater. Product details An easy to use, highly professional product has been created through techniques and innovations gained from years of experience. The housing for  Sony Cyber-shot RX100 Mark VI / RX100 Mark VII perfect handling by means of an adjustable strips. Easy access to all key/main camera controls by means of clearly labelled laser-engraved longlasting buttons. An easy and quick release camera mounting plate allows the camera positioning; the back door has a large window for a fine camera display view and it is entirely detached from the front body to make easier the camera fitting. ONE HAND OPEN/CLOSE It's very easy to open and close Sony Cyber-shot RX100 Mark VI / RX100 Mark VII, without any efforts by the user thanks to the side helicoid screw and the bottom centered pins; the camera is placed easily into the housing on a sliding tray that keeps the camera robustly in place. A lever locks the tray safely inside the housing. The housing stands with great stability due to sturdy and wide rubber feet located on the bottom. PORT, CLOSE-UP AND WIDE-ANGLE LENSES The housing is equipped with a square port which allows the user to make use of the full range of the built-in camera zoom. The port is made of high quality materials to ensure a perfect image quality. This flat port is mounted via a secure bayonet mount to the housing. There is also an alternative port with an M67 thread that allows the usage of macro diopters (AS739). Alternatively, the standard compact port with M67 thread can be used, enabling the use of other M67 accessories but limits the range of the camera zoom (AS761) LIGHTING Sony Cyber-shot RX100 Mark VI / RX100 Mark VII own strobe lighting can be used fitting an outside diffuser on the porthole. For better performance with wide angle lenses, one or two external strobes can be connected by optical fiber using the adaptor included. CONSTRUCTION AND SAFETY Only the best materials are used to manufacture our housings such anodized aluminum which is anticorodal and thermo-coated and stainless steel. A longlasting product that requires easy and simple maintenance by the user. So small and so rich in technology! Dual high precision and quality O-Ring seals protect and ensure a perfect and secure watertight for all movable and / or removable parts; a red alarm for humidity/water inside the housing is powered by a battery replaceable by the user. Working depth is 100 metres. An hole positioned on the bottom allows to secure the housing for Sony Cyber-shot RX100 Mark VI / RX100 Mark VII with a line/strap. Different accessories can be fitted by means of an upper sliding tray and double threaded M6 holes and one 1/4W on the bottom. Controls ON/OFF of Sony Cyber-shot RX100 Mark VI / RX100 Mark VII Own camera strobe open/close Ergonomic camera focusing and shutter button for an easy use with gloves Shutter speed priority Lens aperture Exposure

The Isotta underwater housing for the Sony A7R V Controls On/off lever for the Sony Alpha 7R V Ergonomic lever for focusing and releasing the camera, easy to use even with gloves on Lens release lever Front command dialC1 button; C2 button; C3 button; C4/delete button Mode dial Still Picture/Movie/S&Q lever Zoom knob Connection safety lever Movie (REC) lever AF-ON lever Rear L dial rear control dial R Lock button rear control dial R Menu button AEL button Multi-selector playback button Buttons on the control wheel Fn button  

The new Canon EOS R5 promises a revolution in photography and cinema. By employing new technologies, including artificial intelligence for AF and an image stabilizer that comes with up to 8 stops* of protection against vibration, Canon aims to make users forget what they knew about Mirrorless cameras. 45-megapixel photos at 20 frames per second, 4K/120P full frame video and a choice of ISO 100-51200. This camera promises outstanding photos in any conditions.  With the built-in, always-on Bluetooth Low Energy connection, establishing a fast Wi-Fi connection with a smart device and reviewing your shots already on the way back is a snap.  * 8 stops based on standard CIPA tests with RF 24-105mm F4 L IS USM at a focal length of 105mm. Product details Canon EOS R5 Underwater Housing by Isotta The housing respects all the key points of Isotta's line of housings: one-handed opening, double O-ring seals for greater safety, the use of high quality materials and the made in Italy craftsmanship. The housing was created to follow the lines of the camera, resulting small and manageable, while ensuring complete control of camera functions and absolute freedom in the use of accessories. MAN BEFORE MACHINE! The focus in the study of the housing goes to the diver who decides to use it. The comfort in the use and management of the machine in water is a fixed point, studied in every detail. The handles are ergonomic, adjustable and interchangeable*. if necessary; the housing is compact and lightweight, so you won't tire your arm too much and have an excellent control over stability. All buttons are conveniently reachable from the grip position of the handles ensuring maximum management of the camera with minimum effort. The rear back offers a full view of the camera screen so that you can shoot in live view unobstructed and in comfort and it detaches completely from the front body so that it is easy to insert the camera and perform operations inside the housing. The presence of the viewfinder allows you to take pictures framing in the classic way and to replace it with a magnifier. The closing knob is Single-hand actionable. MORE AND MORE CUSTOMIZABLE! Supplied with only the connections for the optical fiber, the housing has been designed with three M16x1 connections and one M24x1 connection, for total freedom in the choice of the conformation of the equipment. When ordering, you can select your preferred lighting control system choosing between Trigger, Sincro N5 or S6 and your right port system. Through the different combinations between ports and extension rings it is possible to use most of the lenses on the market. Various accessories can be used by means of an M8 hole located at the top of the case and two M6 threaded holes located at the bottom. To make it even more unique, have your name or logo engraved. SAFETY IS IMPORTANT! The locking pins on the back are made of stainless steel and penetrate the shell for added strength and security. The housing is made of aluminum, resistant and anti-corrosion, anodized in the unmistakable red color. The classic double o-ring seal is on all moving and removable parts ensures an optimal watertight seal. The camera is held straight, centered and in place by a mounting plate with a safety catch, which slips nimbly into the housing. NNo risk of sudden infiltration. A red humidity alarm inside the case is powered by a user-replaceable battery and instantly signals an increase in humidity in a critical area. Watertightness is guaranteed up to a maximum depth of 100 meters. Highlights Ergonomic side handles, adjustable (via optional accessory) Two built-in fiber optic connectors Two standard electrical sync cord bulkheads Nikonos N5 or S6 not included Back housing completely detachable from the front housing Tray with lock for an easy fitting of the camera Single-hand closing knob for back housing Three M16x1 port for installation of accessories, e.g. vacuum valves or monitors One M24x1 port for installation of accessories, e.g. monitor Aluminum buttons and knobs and levers marked in the near with symbols identical to those of the machine in use Wide back display viewfinder glass Viewfinder Dual O-Ring seals on all buttons and removable parts Moisture sensor with LED and audible indicator (replaceable battery) Removable port - 120mm bayonet Ports security latch to prevent accidental opening Wide, rubber covered feet for solid footing M8 hole located on upper side of the housing for various accessories such as focus lights Two M6 holes located on housing bottom side for different accessories such as brackets for strobes or tripods External viewfinders can be mounted, INON compatible

The housing for Canon Powershot G7X Mark III allows to capitalize on the camera full potential and to capture amazing pictures underwater. Product details An easy to use, highly professional product has been created through techniques and innovations gained from years of experience. The housing for  Canon Powershot G7X Mark III perfect handling by means of an adjustable strips. Easy access to all key/main camera controls by means of clearly labelled laser-engraved longlasting buttons. An easy and quick release camera mounting plate allows the camera positioning; the back door has a large window for a fine camera display view and it is entirely detached from the front body to make easier the camera fitting. One Hand open/close It's very easy to open and close Canon Powershot G7X Mark III, without any efforts by the user thanks to the side helicoid screw and the bottom centered pins; the camera is placed easily into the housing on a sliding tray that keeps the camera robustly in place. A lever locks the tray safely inside the housing. The housing stands with great stability due to sturdy and wide rubber feet located on the bottom. Port, Close-up and Wide-angle Lenses Front portholes are built with high quality standards of materials to ensure a perfect image quality. A removable flat port is fitted thanks to markers and a bayonet connection to Canon Powershot G7X Mark III housing. A M67 threaded end allows the use of additional wet wide angle lenses and macro lenses. For extreme additional wide angle lens a shorter porthole is available. Lighting Canon Powershot G7X Mark II own strobe lighting can be used fitting an outside diffuser on the porthole. For better performance with wide angle lenses, one or two external strobes can be connected by optical fiber using the adaptor included. Construction and Safety Only the best materials are used to manufacture our housings such anodized aluminum which is anticorodal and thermo-coated and stainless steel. A longlasting product that requires easy and simple maintenance by the user. So small and so rich in technology! Dual high precision and quality O-Ring seals protect and ensure a perfect and secure watertight for all movable and / or removable parts; a red alarm for humidity/water inside the housing is powered by a battery replaceable by the user. Working depth is 100 metres. An hole positioned on the bottom allows to secure the housing for Canon Powershot G7X Mark III with a line/strap. Different accessories can be fitted by means of an upper sliding tray and double threaded M6 holes and one 1/4W on the bottom. Controls ON/OFF of Canon PowerShot G7X Mark III; Own camera strobe open/close; Ergonomic camera focusing and shutter button for an easy use with gloves; Shutter speed priority; Lens aperture;  

Techniques and innovations based on years of experience have resulted in an easy-to-use, highly professional product. Easy access to all major camera controls, even with gloves, through clearly labelled, laser-etched, durable buttons. The back door has a large window glass for a fine camera display and optical viewfinder, and is completely separated from the front body to facilitate camera mounting. The enclosure is very stable due to the sturdy and wide rubber feet on the underside. Open and close with one hand It is very easy to open and close the Sony a7III without any effort by the user thanks to the upper spiral channel and the lower centring pins; the camera is simply placed in the housing on a sliding carriage that holds the camera sturdily in place. Ports and extension rings A range of ports and extension rings are available in the relevant section. The detachable port mounts to the Sony a7III body thanks to markers and a 120mm bayonet mount. The interchangeable ports and extension rings allow the use of most lenses on the market for maximum versatility and Performance. Light Two fibre optic ports allow the use of external flashes through the manual trigger. The housing has three M16 holes for the installation of accessories, e.g. synchro cables, vacuum valves, monitors. Construction and safety Only the best materials are used in the manufacture of our enclosures, such as anodised aluminium, which is corrosion-resistant and thermally coated, and stainless steel. A durable product that requires easy and quick maintenance by the user. Two high precision and high quality O-ring seals protect and ensure perfect and safe watertightness for all moving and / or removable parts; a red moisture / water alarm inside the housing is powered by a user replaceable battery. The working depth is 100 metres. Various accessories can be mounted directly on the handles or by means of an M8 upper threaded hole, with the Isotta upper handle or via the M6 and M8 threaded holes on the bottom. Operation Sony a7 III ON/OFF Ergonomic camera focus and shutter release for easy gloved operation Lens release Rear control panel Upper control panel All controls are on the body Special features Ergonomic side handles, adjustable (via optional accessories); Two fibre optic ports;  Three M16 holes for installation of accessories, e.g. synchro cables, vacuum valves, monitors;  The rear enclosure is fully detachable from the front enclosure; Locking compartment for easy camera insertion; One-handed locking button for the rear housing; Aluminium buttons and dials with engraved symbols identical to the camera controls; Viewfinder glass with wide back; Double O-ring seals on all buttons and removable parts; Humidity sensor with LED indicator (replaceable battery); Detachable port -120 mm bayonet; Safety lock on ports to prevent accidental opening; Wide, rubberised feet for firm footing on boat bottoms or seabed; M8 hole at the top of the housing for various accessories such as focusing lights; Two M6 holes on the bottom of the housing for various accessories such as brackets for strobes or tripods; External viewfinders can be mounted, INON X-2 compatible;

An ergonomic highly professional product entirely Made in Italy that offers the highest quality and enhanced performance underwater. The Nikon Z7 II / Z6 II Underwater Housing by Isotta The durable anodized aluminum protects the camera from water and other damaging elements and its stylish, compact and ergonomic design has been specifically created for the breakthrough models of mirrorless Nikon Z7 / Z6 and Nikon Z7 II / Z6 II. The perfect handling of the Isotta signature-red color Nikon Z7/6 housing is possible by means of adjustable handles crafted to match the human hand and make holding the camera very comfortable even throughout long dives. Easy access to all key/main camera controls by means of clearly labelled laser-engraved longlasting buttons, even with gloves and drysuit gloves. An quick release camera mounting plate allows the camera positioning and a lever locks the tray inside the housing. The back door has a large window anti-scratch glass for a fine camera display and optical viewfinder view and it is entirely detached from the front body to make easier the camera fitting. External viewfinders can be mounted, INON X-2 compatible. ONE HAND OPEN/CLOSE The Isotta underwater housing for Nikon Z7 II / 6 II is closed with Isotta’s single handed one-turn knob. It’s the only single latch closing mechanism in the DSLR housing market. It’s fast, simple and secure thanks to its double steel pins at the bottom of the housing. PORTS AND EXTENSION RING A series of ports and extension rings are available in dedicated section. The removable port is fitted thanks to markers and a bayonet 120 mm connection to the Nikon Z7 II / Z6 II. The housing has been made on purpose to fit the Nikon FTZ adapter, which does let you use Nikon F-mount lenses on the Z7 – with varying degrees of compatibility. The interchangeable port bodies and extensions rings combine to allow the use of most of lenses on the market for maximum versatility and performance. CONSTRUCTION AND SAFETY Only the best materials are used to manufacture our housings such anodized aluminum which is anticorodal and thermo-coated and stainless steel. A longlasting product that requires easy and simple maintenance by the user. Dual high-quality O-Ring seals protect and ensure a perfect and secure watertight for all movable and / or removable parts; a red alarm for humidity/water inside the housing is powered by a battery replaceable by the user. Working depth is 100 metres. Different accessories can be fitted by means of one M8 hole positioned on the upper side of the housing and two threaded M6 holes located on housing bottom side. Three M16 x1 threaded holes can be used for different needs such as to accomodate a vacuum. Controls ON/OFF of Nikon Z7 II / Z6 II Ergonomic camera focusing and shutter button for an easy use with gloves Lens release Rear control panel Upper control panel All controls are available on the housing Highlights Ergonomic side handles, adjustable (via optional accessory) Two fiber optic connections Two optional electrical sync cord bulkheads Back housing completely detachable from the front housing Dedicated REC lever and ISO button Tray with lock for an easy fitting of the camera Single-hand closing knob for back housing Three M16 hole for installation of accessories, e.g. vacuum valves or monitors Aluminum buttons and dials with engraved symbols identical to camera controls All camera controls are external Wide back display viewfinder glass Optical viewfinder Double O-Ring seals on all buttons and removable parts Moisture alarm with LED and an acoustic warning signal (replaceable battery) Removable port - 120mm bayonet Ports security latch to prevent accidental opening Wide, rubber covered feet for solid footing One M8 hole located on upper side of the housing for various accessories such as focus lights Two M6 holes located on housing bottom side for different accessories such as brackets for strobes or tripods External viewfinders can be mounted, INON X-2 compatible

The housing for Sony Alpha 7S III allows to capitalize on the camera full potential and to capture amazing pictures underwater. Product details An easy to use highly professional product has been created through techniques and innovations gained from years of experience. Easy access to all key/main camera controls, even with gloves, by means of clearly labelled lasered long life buttons. The back door has a large window glass for a fine camera display and optical viewfinder view and it is entirely detached from the front body to make easier the camera fitting. The housing stands with great stability due to sturdy and wide rubber feet located on the bottom. One Hand open/close It's very easy to open and close Sony Alpha 7S III, without efforts by the user thanks to the upper helicoid and the bottom centered Pins; the camera is placed easily into the housing on a sliding tray that keeps the camera robustly in place. Ports and Extensionrings A series of ports and extension rings are available in the dedicated section. The removable port is fitted thanks to markers and a bayonet 120 mm connection to the Sony Alpha 7S III housing. The interchangeable port bodies and extensions rings allow the use of most of lenses on the market for maximum versatility and Performance. Lighting Two fiber optic connections allow the use of external strobe through the manual trigger (optional). The housing features two M16 holes and one M24 hole for installation of accessories, e.g. syncro cords, vacuum valves, monitors. Construction and Safety Only the best materials are used to manufacture our housings such as anodized aluminum, which is anticorodal and thermo-coated, and stainless steel. A longlasting product that requires easy and simple maintenance by the user. Dual high precision and quality O-Ring seals protect and ensure a perfect and secure watertight for all movable and / or removable parts; a red alarm for humidity/water inside the housing is powered by a battery replaceable by the user. Working depth is 100 metres. Different accessories can be fitted directly on the handles or by means of an M8 upper threaded hole, using the Isotta top handle or via the M6 threaded holes on the bottom. Controls ON/OFF of Sony Alpha 7S III Ergonomic camera focusing and shutter button for an easy use with gloves Lens release Rear control panel Upper control panel All controls are available on the housing Specifications Ergonomic side handles, adjustable (via optional accessory) Two fiber optic connections Two M16 holes and one M24 for installation of accessories, e.g. syncro cords, vacuum valves, monitors Back housing completely detachable from the front housing Tray with lock for the easy insertion of the camera Single-hand closing knob for the back of the housing Aluminum buttons and dials with engraved symbols identical to camera controls Wide back display viewfinder glass Double O-Ring seals on all buttons and removable parts Moisture sensor with LED indicator (replaceable battery) Removable port -120 mm bayonet Ports security latch to prevent accidental opening Wide, rubber covered feet for solid footing on boat floors or sea floor M8 hole located on upper side of the housing for various accessories such as focus lights Two M6 holes located on housing bottom side for different accessories such as brackets for strobes or tripods External viewfinders can be mounted, INON X-2 compatible

An ergonomic highly professional product entirely Made in Italy that offers the highest quality and enhanced performance underwater. Isotta's Nikon Z8 Underwater Housing The durable anodized aluminum protects the camera from water and other damaging elements and its stylish, compact and ergonomic design has been specifically created for the breakthrough models of mirrorless Nikon Z8. The perfect handling of the Isotta signature-red color Nikon Z8 housing is possible by means of adjustable handles crafted to match the human hand and make holding the camera very comfortable even throughout long dives. Easy access to all key/main camera controls by means of clearly labelled laser-engraved longlasting buttons, even with gloves and drysuit gloves. An quick release camera mounting plate allows the camera positioning and a lever locks the tray inside the housing. The back door has a large window anti-scratch glass for a fine camera display and optical viewfinder view and it is entirely detached from the front body to make easier the camera fitting. External viewfinders can be mounted, INON X-2 compatible. ONE HAND OPEN/CLOSE The housing for Nikon Z8 is closed with Isotta’s single handed one-turn knob. It’s the only single latch closing mechanism in the DSLR housing market. It’s fast, simple and secure thanks to its double steel pins at the bottom of the housing. PORTS AND EXTENSION RING A series of ports and extension rings are available in dedicated section. The removable port is fitted thanks to markers and a bayonet 120 mm connection to the Nikon Z8. The interchangeable port bodies and extensions rings combine to allow the use of most of lenses on the market for maximum versatility and performance. CONSTRUCTION AND SAFETY Only the best materials are used to manufacture our housings such anodized aluminum which is anticorodal and thermo-coated and stainless steel. A longlasting product that requires easy and simple maintenance by the user. Dual high-quality O-Ring seals protect and ensure a perfect and secure watertight for all movable and / or removable parts; a red alarm for humidity/water inside the housing is powered by a battery replaceable by the user. Working depth is 100 metres. Different accessories can be fitted by means of one M8 hole positioned on the upper side of the housing and two threaded M6 holes located on housing bottom side. Three M16 x1 threaded holes can be used for different needs such as to accomodate a vacuum. Controls On and off lever of the Nikon Z8 Ergonomic camera focusing and shutter lever, easy to use with gloves Lens release lever Front dial Fn1 lever Fn2 lever Fn3 lever ISO button MODE button BKT button Flash button +/- button Focus mode button Quick release-mode button Zoom knob Port safety lever Movie lever (REC) AF-ON lever Rear dial R Release mode knob I (info) button Menu button AEL button DISP. button Multi-selector Playback, Viewing pictures button Zoom-in (+) button Zoom-out (-) button Qual button WB button Delete button Fn4 button Photo/video selector On/Off Display lever Highlights Ergonomic side handles, adjustable (via optional accessory) Two fiber optic connections standard (to shoot it needs an additional trigger) Three M16 holes and one M28 for installation of accessories, e.g. syncro cords, vacuum valves, monitors Back housing completely detachable from the front housing Tray with lock for the easy insertion of the camera Single-hand closing knob for the back of the housing Aluminum buttons and dials with engraved symbols identical to camera controls Wide back display viewfinder glass Double O-Ring seals on all buttons and removable parts Moisture sensor with LED indicator (replaceable battery) Removable port 120 mm bayonet Ports security latch to prevent accidental opening Wide, rubber covered feet for solid footing on boat floors or sea floor M8 hole located on upper side of the housing for various accessories such as focus lights Two M6 holes located on housing bottom side for different accessories such as brackets for strobes or tripods External viewfinders can be mounted, INON X-2 compatible

The housing for OM Systems OM-1 allows to capitalize on the camera full potential and to capture amazing pictures underwater. Product details An easy to use highly professional product has been created through techniques and innovations gained from years of experience. Easy access to all key/main camera controls, even with gloves, by means of clearly labelled lasered long life buttons. The back door has a large window glass for a fine camera display and optical viewfinder view and it is entirely detached from the front body to make easier the camera fitting. The housing stands with great stability due to sturdy and wide rubber feet located on the bottom. ONE HAND OPEN/CLOSE It's very easy to open and close OM Systems OM-1, without efforts by the user thanks to the upper helicoid and the bottom centered pins; the camera is placed easily into the housing on a sliding tray that keeps the camera robustly in place. PORTS AND EXTENSION RING A series of ports and extension rings are available in dedicated section. The removable port is fitted thanks to markers and a bayonet 102mm connection to the OM Systems OM-1 housing. The interchangeable port bodies and extensions rings combine to allow the use of most of lenses on the market for maximum versatility and performance.  LIGHTING Two fiber optic connections are placed in front of the built-in flash and allow the use of external strobe. CONSTRUCTION AND SAFETY Only the best materials are used to manufacture our housings such as anodized aluminum, which is anticorodal and thermo-coated, and stainless steel. A longlasting product that requires easy and simple maintenance by the user. Dual high precision and quality O-Ring seals protect and ensure a perfect and secure watertight for all movable and / or removable parts; a red alarm for humidity/water inside the housing is powered by a battery replaceable by the user. Working depth is 100 metres. Different accessories can be fitted by means of an M8 upper threaded hole, using the Isotta top handle or via the M6 and M8 threaded holes on the bottom. Controls ON/OFF of OM Systems OM-1; Own camera strobe open/close; Ergonomic camera focusing and shutter button for an easy use with gloves; Lens release; Rear control panel; Upper control panel;  All controls are available on the housing;

Details of the Isotta underwater housing for Sony Alpha 7 IV Techniques and innovations gained from years of experience have resulted in an easy-to-use, highly professional product. Easy access to all camera buttons/main controls, even when wearing gloves, through clearly labelled, laser-etched buttons with long life. The back cover has a large viewing window for a good overview of the camera and optical viewfinder and is completely detachable from the front housing to facilitate camera mounting. The housing is very stable due to the robust and wide rubber grippers on the underside. One-handed opening/closing Opening and closing the Isotta underwater housing for the Sony Alpha 7 IV is very easy and effortless thanks to the upper screw bolt and the lower centred pins; the camera is simply placed in the housing on a sliding tray that holds the camera stably in position. Ports and extensions A number of ports and extension rings are available in the designated area. The detachable port is attached to the underwater housing of the Sony Alpha 7 IV thanks to markings and a 120mm bayonet mount. The interchangeable ports and extension rings allow the use of most lenses on the market for maximum versatility and performance. Light control Two fibre optic ports allow the use of an external strobe via the manual output (optional). The housing has M28 and M16 holes for the installation of accessories, e.g. synchro cables, vacuum valves, monitors. Construction and safety Only the best materials are used in the manufacture of our housings, such as anodised aluminium, which is anti-corodal and thermo-coated, and stainless steel. A durable product that requires easy and simple maintenance by the user. Two high precision and high quality O-ring seals protect and ensure a perfect and secure seal of all moving and / or removable parts; a red alarm for moisture / water inside the housing is powered by a user replaceable battery. The working depth is 100 metres. Various accessories can be attached directly to the handles or via an upper M8 threaded hole, via the Isotta top handle or via the M6 threaded holes on the underside.

The underwater housing for the Sony Alpha 1 allows you to exploit the camera's full potential and capture amazing images underwater. Details of the Isotta underwater housing for Sony Alpha 1 Technology and Innovation gained from years of experience has resulted in an easy-to-use, highly professional product. Easy access to all the camera's buttons/main controls, even when wearing gloves, thanks to clearly labelled, laser-etched buttons with a long service life. The rear panel has a large viewing window for a good overview of the camera and optical viewfinder and is completely detachable from the front housing to facilitate camera mounting. The housing is very stable thanks to robust and wide rubber feet on the underside. One-handed open/close Opening and closing the Sony Alpha 1 is very easy and effortless thanks to the upper screw bolt and the lower centred pins; the camera is simply placed in the housing on a sliding tray that holds the camera stably in Position. Ports and extensions A range of ports and extension rings are available in the designated area. The detachable port is attached to the body of the Sony Alpha 1 Underwater housing by Isotta thanks to markings and a 120mm bayonet mount. The interchangeable ports and extension rings allow the use of most lenses on the market for maximum versatility and Performance. Light control Two fibre optic connections allow the use of an external strobe via the manual trigger (optional). The Isotta undewater housing for Sony alpha 1has one M28 and M16 holes for the installation of accessories, e.g. synchro cables, vacuum valves, monitors. Construction and safety Only the best materials are used in the manufacture of our enclosures, such as anodised aluminium, which is anti-corodal and thermo-coated, and stainless steel. A durable product that requires easy and simple maintenance by the user. Two high precision and high quality O-ring seals protect and ensure a perfect and secure seal of all moving and / or removable parts; a red alarm for moisture / water inside the housing is powered by a user replaceable battery. The working depth is 100 metres. Various accessories can be attached directly to the handles or via an upper M8 threaded hole, via the Isotta top handle or via the M6 threaded holes on the bottom. Controls On and off lever of the della Sony Alpha 1; Ergonomic camera focusing and shutter lever, easy to use with gloves; Lens release lever; Aperture knob; C1 lever; C2 button; Mode knob; Focus selector knob; Zoom knob; Port safety lever; REC lever; AF-ON lever; Multi-shot selector knob; Shutter speed knob; Exposure knob; Lock/unlock exposure dial button; Rear control panel of the camera; Technical data Red color anodized aluminum body; Ergonomic side handles, adjustable (via optional accessory); Two fiber optic connections standard;* Two M16 holes and one M28 for installation of accessories, e.g. syncro cords, vacuum valves, monitors; Back housing completely detachable from the front housing; Tray with lock for the easy insertion of the camera; Single-hand closing knob for the back of the housing; Aluminum buttons and dials with engraved symbols identical to camera controls; Wide back display viewfinder glass; Double O-Ring seals on all buttons and removable parts; Moisture sensor with LED indicator (replaceable battery); Removable port 120 mm bayonet; Ports security latch to prevent accidental opening; Wide, rubber covered feet for solid footing on boat floors or sea floor; M8 hole located on upper side of the housing for various accessories such as focus lights; Two M6 holes located on housing bottom side for different accessories such as brackets for strobes or tripods; External viewfinders can be mounted, INON X-2 compatible; Depth rated to 100 metres;

An ergonomic highly professional product entirely Made in Italy that offers the highest quality and enhanced performance underwater. Isotta's Nikon Z9 Underwater Housing The durable anodized aluminum protects the camera from water and other damaging elements and its stylish, compact and ergonomic design has been specifically created for the breakthrough models of mirrorless Nikon Z7 / Z6. The perfect handling of the Isotta signature-red color Nikon Z7/6 housing is possible by means of adjustable handles crafted to match the human hand and make holding the camera very comfortable even throughout long dives. Easy access to all key/main camera controls by means of clearly labelled laser-engraved longlasting buttons, even with gloves and drysuit gloves. An quick release camera mounting plate allows the camera positioning and a lever locks the tray inside the housing. The back door has a large window anti-scratch glass for a fine camera display and optical viewfinder view and it is entirely detached from the front body to make easier the camera fitting. External viewfinders can be mounted, INON X-2 compatible. ONE HAND OPEN/CLOSE The housing for Nikon Z7 / Z6 is closed with Isotta’s single handed one-turn knob. It’s the only single latch closing mechanism in the DSLR housing market. It’s fast, simple and secure thanks to its double steel pins at the bottom of the housing. PORTS AND EXTENSION RING A series of ports and extension rings are available in dedicated section. The removable port is fitted thanks to markers and a bayonet 120 mm connection to the Nikon Z9. The housing has been made on purpose to fit the Nikon FTZ adapter, which does let you use Nikon F-mount lenses on the Z7 – with varying degrees of compatibility. The interchangeable port bodies and extensions rings combine to allow the use of most of lenses on the market for maximum versatility and performance. CONSTRUCTION AND SAFETY Only the best materials are used to manufacture our housings such anodized aluminum which is anticorodal and thermo-coated and stainless steel. A longlasting product that requires easy and simple maintenance by the user. Dual high-quality O-Ring seals protect and ensure a perfect and secure watertight for all movable and / or removable parts; a red alarm for humidity/water inside the housing is powered by a battery replaceable by the user. Working depth is 100 metres. Different accessories can be fitted by means of one M8 hole positioned on the upper side of the housing and two threaded M6 holes located on housing bottom side. Three M16 x1 threaded holes can be used for different needs such as to accomodate a vacuum. Controls On and off lever of the Nikon Z9 Ergonomic camera focusing and shutter lever, easy to use with gloves Lens release lever Front dial Fn1 lever Fn2 lever Fn3 lever ISO button MODE button BKT button Flash button +/- button Focus mode button Quick release-mode button Zoom knob Port safety lever Movie lever (REC) AF-ON lever Rear dial R Release mode knob I (info) button Menu button AEL button DISP. button Multi-selector Playback, Viewing pictures button Zoom-in (+) button Zoom-out (-) button Qual button WB button Delete button Fn4 button Photo/video selector On/Off Display lever Highlights Ergonomic side handles, adjustable (via optional accessory) Two fiber optic connections standard (to shoot it needs an additional trigger) Three M16 holes and one M28 for installation of accessories, e.g. syncro cords, vacuum valves, monitors Back housing completely detachable from the front housing Tray with lock for the easy insertion of the camera Single-hand closing knob for the back of the housing Aluminum buttons and dials with engraved symbols identical to camera controls Wide back display viewfinder glass Double O-Ring seals on all buttons and removable parts Moisture sensor with LED indicator (replaceable battery) Removable port 120 mm bayonet Ports security latch to prevent accidental opening Wide, rubber covered feet for solid footing on boat floors or sea floor M8 hole located on upper side of the housing for various accessories such as focus lights Two M6 holes located on housing bottom side for different accessories such as brackets for strobes or tripods External viewfinders can be mounted, INON X-2 compatible

The housing for Olympus OM-D E-M5 Mark II allows to capitalize on the camera full potential and to capture amazing pictures underwater. Product details An easy to use highly professional product has been created through techniques and innovations gained from years of experience. Easy access to all key/main camera controls, even with gloves, by means of clearly labelled lasered long life buttons. The back door has a large window glass for a fine camera display and optical viewfinder view and it is entirely detached from the front body to make easier the camera fitting. The housing stands with great stability due to sturdy and wide rubber feet located on the bottom. ONE HAND OPEN/CLOSE It's very easy to open and close Olympus OM-D E-M5 Mark II, without efforts by the user thanks to the upper helicoid and the bottom centered pins; the camera is placed easily into the housing on a sliding tray that keeps the camera robustly in place. PORTS AND EXTENSION RING A series of ports and extension rings are available in dedicated section. The removable port is fitted thanks to markers and a bayonet 102mm connection to the Olympus OM-D E-M5 Mark II housing. The interchangeable port bodies and extensions rings combine to allow the use of most of lenses on the market for maximum versatility and performance.  LIGHTING Two fiber optic connections are placed in front of the built-in flash and allow the use of external strobe. CONSTRUCTION AND SAFETY Only the best materials are used to manufacture our housings such as anodized aluminum, which is anticorodal and thermo-coated, and stainless steel. A longlasting product that requires easy and simple maintenance by the user. Dual high precision and quality O-Ring seals protect and ensure a perfect and secure watertight for all movable and / or removable parts; a red alarm for humidity/water inside the housing is powered by a battery replaceable by the user. Working depth is 100 metres. Different accessories can be fitted by means of an M8 upper threaded hole, using the Isotta top handle or via the M6 and M8 threaded holes on the bottom. Controls ON/OFF of Olympus OM-D E-M5 Mark II; Own camera strobe open/close; Ergonomic camera focusing and shutter button for an easy use with gloves; Lens release; Rear control panel; Upper control panel;  All controls are available on the housing;

The underwater housing for Canon Powershot G5XII allows to capitalize on the camera full potential and to capture amazing pictures underwater. The Isotta Underwater Housing for Canon Powershot G5XII  An easy to use, highly professional product has been created through techniques and innovations gained from years of experience. The housing for  Canon Powershot G5X perfect handling by means of an adjustable strips. Easy access to all key/main camera controls by means of clearly labelled laser-engraved longlasting buttons. An easy and quick release camera mounting plate allows the camera positioning; the back door has a large window for a fine camera display view and it is entirely detached from the front body to make easier the camera fitting. ONE HAND OPEN/CLOSE It's very easy to open and close Canon Powershot G5XII, without any efforts by the user thanks to the side helicoid screw and the bottom centered pins; the camera is placed easily into the housing on a sliding tray that keeps the camera robustly in place. A lever locks the tray safely inside the housing. The housing stands with great stability due to sturdy and wide rubber feet located on the bottom. PORT, CLOSE-UP AND WIDE-ANGLE LENSES Front portholes are built with high quality standards of materials to ensure a perfect image quality. A removable flat port is fitted thanks to markers and a bayonet connection to Canon Powershot G5XII housing.  LIGHTING Canon Powershot G5XII own strobe lighting can be used fitting an outside diffuser on the porthole. For better performance with wide angle lenses, one or two external strobes can be connected by optical fiber using the adaptor included.   CONSTRUCTION AND SAFETY Only the best materials are used to manufacture our housings such anodized aluminum which is anticorodal and thermo-coated and stainless steel. A longlasting product that requires easy and simple maintenance by the user. So small and so rich in technology! Dual high precision and quality O-Ring seals protect and ensure a perfect and secure watertight for all movable and / or removable parts; a red alarm for humidity/water inside the housing is powered by a battery replaceable by the user. Working depth is 100 metres. An hole positioned on the bottom allows to secure the housing for Canon Powershot G5XII with a line/strap. Different accessories can be fitted by means of an upper sliding tray and double threaded M6 holes and one 1/4W on the bottom. Controls ON/OFF of Canon PowerShot G5X Mark II Own camera strobe open/close Ergonomic camera focusing and shutter button for an easy use with gloves Shutter speed priority Lens aperture   Product Highlights All Canon Powershot G5aX Mrk II key main controls M16x1 hole for vacuum system or external monitor Easy one hand housing open/close Moisture sensor Double high precision and quality O-Ring seals

Techniques and innovations based on years of experience have resulted in an easy-to-use, highly professional product. Easy access to all major camera controls, even with gloves, through clearly labelled, laser-etched, durable buttons. The rear flap has a large window glass for a fine camera display and optical viewfinder and is completely separated from the front body to facilitate camera mounting. The enclosure is very stable due to the sturdy and wide rubber feet on the underside. Can be opened and closed with one hand It is very easy to open and close the Sony a7R III without the user having to do so using the top spiral and bottom centring pins; the camera is simply placed in the housing on a sliding carriage that holds the camera securely in place. Ports and extension ring A range of port and extension rings are available in the relevant section. The detachable port mounts to the Sony a7R III body thanks to markers and a 120mm bayonet mount. The interchangeable port bodies and extension rings allow the use of most lenses on the market for maximum versatility and Performance. Light Two fibre optic ports allow the use of an external flash via the manual trigger. The housing has three M16 holes for the installation of accessories, e.g. synchro cables, vacuum valves, monitors. Construction and safety Only the best materials are used in the manufacture of our enclosures, such as anodised aluminium, which is corrosion-resistant and thermally coated, and stainless steel. A durable product that requires easy and quick maintenance by the user. Two high precision and high quality O-ring seals protect and ensure perfect and safe watertightness for all moving and / or removable parts; a red moisture / water alarm inside the housing is powered by a user replaceable battery. The working depth is 100 metres. Various accessories can be mounted directly on the handles or by means of an M8 upper threaded hole, with the Isotta upper handle or via the M6 and M8 threaded holes on the Bottom. Operation Sony a7R III ON/OFF Ergonomic camera focus and shutter release for easy gloved operation Lens release Rear control panel Upper control Panel All controls are on the body Features: Ergonomic side handles, adjustable (via optional accessories); Two fibre optic ports; Three M16 holes for installation of accessories, e.g. synchro cables, vacuum valves, monitors;  The rear enclosure is fully detachable from the front enclosure; Locking compartment for easy camera insertion; One-handed locking button for the rear housing; Aluminium buttons and dials with engraved symbols identical to the camera controls; Viewfinder glass with wide back; Double O-ring seals on all buttons and removable parts; Humidity sensor with LED indicator (replaceable battery); Detachable port -120 mm bayonet; Safety lock on ports to prevent accidental opening; Wide, rubberised feet for firm footing on boat bottoms or seabed; M8 hole at the top of the housing for various accessories such as focusing lights; Two M6 holes on the bottom of the housing for various accessories such as brackets for strobes or tripods; External viewfinders can be mounted, INON X-2 compatible;

The housing for Olympus OM-D E-M5 Mark II allows to capitalize on the camera full potential and to capture amazing pictures underwater. Product details An easy to use highly professional product has been created through techniques and innovations gained from years of experience. Easy access to all key/main camera controls, even with gloves, by means of clearly labelled lasered long life buttons. The back door has a large window glass for a fine camera display and optical viewfinder view and it is entirely detached from the front body to make easier the camera fitting. The housing stands with great stability due to sturdy and wide rubber feet located on the bottom. ONE HAND OPEN/CLOSE It's very easy to open and close Olympus OM-D E-M5 Mark II, without efforts by the user thanks to the upper helicoid and the bottom centered pins; the camera is placed easily into the housing on a sliding tray that keeps the camera robustly in place. PORTS AND EXTENSION RING A series of ports and extension rings are available in dedicated section. The removable port is fitted thanks to markers and a bayonet 102mm connection to the Olympus OM-D E-M5 Mark II housing. The interchangeable port bodies and extensions rings combine to allow the use of most of lenses on the market for maximum versatility and performance.  LIGHTING Two fiber optic connections are placed in front of the built-in flash and allow the use of external strobe. CONSTRUCTION AND SAFETY Only the best materials are used to manufacture our housings such as anodized aluminum, which is anticorodal and thermo-coated, and stainless steel. A longlasting product that requires easy and simple maintenance by the user. Dual high precision and quality O-Ring seals protect and ensure a perfect and secure watertight for all movable and / or removable parts; a red alarm for humidity/water inside the housing is powered by a battery replaceable by the user. Working depth is 100 metres. Different accessories can be fitted by means of an M8 upper threaded hole, using the Isotta top handle or via the M6 and M8 threaded holes on the bottom. Controls ON/OFF of Olympus OM-D E-M5 Mark II; Own camera strobe open/close; Ergonomic camera focusing and shutter button for an easy use with gloves; Lens release; Rear control panel; Upper control panel;  All controls are available on the housing;

The housing for Olympus OM-D E-M1 Mark II allows to capitalize on the camera full potential and to capture amazing pictures underwater. Product details An easy to use highly professional product has been created through techniques and innovations gained from years of experience. Easy access to all key/main camera controls, even with gloves, by means of clearly labelled lasered long life buttons. The back door has a large window glass for a fine camera display and optical viewfinder view and it is entirely detached from the front body to make easier the camera fitting. The housing stands with great stability due to sturdy and wide rubber feet located on the bottom. Ergonomic side handles are included. ONE HAND OPEN/CLOSE It's very easy to open and close Olympus OM-D E-M1 Mark II, without efforts by the user thanks to the upper helicoid and the bottom centered pins; the camera is placed easily into the housing on a sliding tray that keeps the camera robustly in place. PORTS AND EXTENSION RING A series of ports and extension rings are available in dedicated section. The removable port is fitted thanks to markers and a bayonet 102 mm connection to the Olympus OM-D E-M1 Mark II housing. The interchangeable port bodies and extensions rings combine to allow the use of most of lenses on the market for maximum versatility and performance.  LIGHTING Two fiber optic connections are placed in front of the built-in flash and allow the use of external strobe. CONSTRUCTION AND SAFETY Only the best materials are used to manufacture our housings such as anodized aluminum, which is anticorodal and thermo-coated, and stainless steel. A longlasting product that requires easy and simple maintenance by the user. Dual high precision and quality O-Ring seals protect and ensure a perfect and secure watertight for all movable and / or removable parts; a red alarm for humidity/water inside the housing is powered by a battery replaceable by the user. Working depth is 100 metres. Different accessories can be fitted directly on the handles or by means of an M8 upper threaded hole, using the Isotta top handle or via the M6 and M8 threaded holes on the bottom. Controls ON/OFF of Olympus OM-D E-M1 Mark II; Own camera strobe open/close; Ergonomic camera focusing and shutter button for an easy use with gloves; Lens release; Rear control panel; Upper control panel; All controls are available on the housing;

With Canon EOS R6 the producer has focused on the photographer's creativity, wanting to support the user in his artistic flair with a camera defined as "radical". With silent shooting at 20 fps, Dual Pixel CMOS AF II sensors and ISO 102,400 this camera promises to meet expectations even under water, allowing you to photograph moving subjects even in low-light. The image stabilizer, 20 megapixel photos and the ability to shoot 4K video, make this camera complete. Built for speed, it produces up to 240 images in RAW format. The possibility of using the double memory card certainly helps to shoot more lightly. Product details Canon EOS R6 Underwater Housing by Isotta The housing respects all the key points of Isotta's line of housings: one-handed opening, double O-ring seals for greater safety, the use of high quality materials and the made in Italy craftsmanship. The housing was created to follow the lines of the camera, resulting small and manageable, while ensuring complete control of camera functions and absolute freedom in the use of accessories. MAN BEFORE MACHINE! The focus in the study of the housing goes to the diver who decides to use it. The comfort in the use and management of the machine in water is a fixed point, studied in every detail. The handles are ergonomic, adjustable and interchangeable*. if necessary; the housing is compact and lightweight, so you won't tire your arm too much and have an excellent control over stability. All buttons are conveniently reachable from the grip position of the handles ensuring maximum management of the camera with minimum effort. The rear back offers a full view of the camera screen so that you can shoot in live view unobstructed and in comfort and it detaches completely from the front body so that it is easy to insert the camera and perform operations inside the housing. The presence of the viewfinder allows you to take pictures framing in the classic way and to replace it with a magnifier. The closing knob is Single-hand actionable. MORE AND MORE CUSTOMIZABLE! Supplied with only the connections for the optical fiber, the housing has been designed with three M16x1 connections and one M24x1 connection, for total freedom in the choice of the conformation of the equipment. When ordering, you can select your preferred lighting control system choosing between Trigger, Sincro N5 or S6 and your right port system. Through the different combinations between ports and extension rings it is possible to use most of the lenses on the market. Various accessories can be used by means of an M8 hole located at the top of the case and two M6 threaded holes located at the bottom. To make it even more unique, have your name or logo engraved. SAFETY IS IMPORTANT! The locking pins on the back are made of stainless steel and penetrate the shell for added strength and security. The housing is made of aluminum, resistant and anti-corrosion, anodized in the unmistakable red color. The classic double o-ring seal is on all moving and removable parts ensures an optimal watertight seal. The camera is held straight, centered and in place by a mounting plate with a safety catch, which slips nimbly into the housing. NNo risk of sudden infiltration. A red humidity alarm inside the case is powered by a user-replaceable battery and instantly signals an increase in humidity in a critical area. Watertightness is guaranteed up to a maximum depth of 100 meters. Highlights Ergonomic side handles, adjustable (via optional accessory) Two built-in fiber optic connectors Two standard electrical sync cord bulkheads Nikonos N5 or S6 not included Back housing completely detachable from the front housing Tray with lock for an easy fitting of the camera Single-hand closing knob for back housing Three M16x1 port for installation of accessories, e.g. vacuum valves or monitors One M24x1 port for installation of accessories, e.g. monitor Aluminum buttons and knobs and levers marked in the near with symbols identical to those of the machine in use Wide back display viewfinder glass Viewfinder Dual O-Ring seals on all buttons and removable parts Moisture sensor with LED and audible indicator (replaceable battery) Removable port - 120mm bayonet Ports security latch to prevent accidental opening Wide, rubber covered feet for solid footing M8 hole located on upper side of the housing for various accessories such as focus lights Two M6 holes located on housing bottom side for different accessories such as brackets for strobes or tripods External viewfinders can be mounted, INON compatible

The housing for Olympus OM-D E-M5 Mark III allows to capitalize on the camera full potential and to capture amazing pictures underwater. The Underwater housing for Olympus E-M5 Mark II by Isotta An easy to use highly professional product has been created through techniques and innovations gained from years of experience. Easy access to all key/main camera controls, even with gloves, by means of clearly labelled lasered long life buttons. The back door has a large window glass for a fine camera display and optical viewfinder view and it is entirely detached from the front body to make easier the camera fitting. The housing stands with great stability due to sturdy and wide rubber feet located on the bottom. ONE HAND OPEN/CLOSE It's very easy to open and close Olympus OM-D E-M5 Mark III, without efforts by the user thanks to the upper helicoid and the bottom centered pins; the camera is placed easily into the housing on a sliding tray that keeps the camera robustly in place. PORTS AND EXTENSION RING A series of ports and extension rings are available in dedicated section. The removable port is fitted thanks to markers and a bayonet 102mm connection to the Olympus OM-D E-M5 Mark III housing. The interchangeable port bodies and extensions rings combine to allow the use of most of lenses on the market for maximum versatility and performance.  LIGHTING Two fiber optic connections are placed in front of the built-in flash and allow the use of external strobe. CONSTRUCTION AND SAFETY Only the best materials are used to manufacture our housings such as anodized aluminum, which is anticorodal and thermo-coated, and stainless steel. A longlasting product that requires easy and simple maintenance by the user. Dual high precision and quality O-Ring seals protect and ensure a perfect and secure watertight for all movable and / or removable parts; a red alarm for humidity/water inside the housing is powered by a battery replaceable by the user. Working depth is 100 metres. Different accessories can be fitted by means of an M8 upper threaded hole, using the Isotta top handle or via the M6 and M8 threaded holes on the bottom. Controls ON/OFF of Olympus OM-D E-M5 Mark III Own camera strobe open/close Ergonomic camera focusing and shutter button for an easy use with gloves Lens release Rear control panel Upper control panel All controls are available on the housing Product Highlights Two fiber optic connectors One M16 port for installation of accessories, e.g. vacuum valves or monitors Back housing completely separable from the front housing Tray with lock for the easy insertion of the camera Single-hand closing knob for back housing Aluminum buttons and dials with engraved symbols identical to camera controls Wide back display viewfinder glass with optical viewfinder Double o-ring seal on all buttons and removable parts Moisture sensor with LED indicator (replacable battery) Removable port - 102mm bayonet Ports security latch to prevent accidental opening Wide, rubber covered feet for solid footing on boat floors or sea floor M8 hole located on upper side of the housing for various accessories such as focus lights Two M6 holes located on housing bottom side for different accessories such as brackets for strobes or tripods External viewfinders can be mounted, INON X-2 compatible

The Isotta underwater housing for Sony a660 allows to capitalize on the camera full potential and to capture amazing pictures underwater. An easy to use highly professional product has been created through techniques and innovations gained from years of experience. Easy access to all key/main camera controls, even with gloves, by means of clearly labelled lasered long life buttons. The back door has a large window glass for a fine camera display and optical viewfinder view and it is entirely detached from the front body to make easier the camera fitting. The housing stands with great stability due to sturdy and wide rubber feet located on the bottom. ONE HAND OPEN/CLOSE It's very easy to open and close Sony a6600, without efforts by the user thanks to the upper helicoid and the bottom centered pins; the camera is placed easily into the housing on a sliding tray that keeps the camera robustly in place. PORTS AND EXTENSION RING A series of ports and extension rings are available in the dedicated section. The removable port is fitted thanks to markers and a bayonet 102 mm connection to the Sony a6600 underwaterhousing. The interchangeable port bodies and extensions rings allow the use of most of lenses on the market for maximum versatility and performance. LIGHTING Two fiber optic connections allow the use of external strobe through the manual trigger. The housing features three M16 holes for installation of accessories, e.g. syncro cords, vacuum valves, monitors. CONSTRUCTION AND SAFETY Only the best materials are used to manufacture our housings such as anodized aluminum, which is anticorodal and thermo-coated, and stainless steel. A longlasting product that requires easy and simple maintenance by the user. Dual high precision and quality O-Ring seals protect and ensure a perfect and secure watertight for all movable and / or removable parts; a red alarm for humidity/water inside the housing is powered by a battery replaceable by the user. Working depth is 100 metres. Different accessories can be fitted directly on the handles or by means of an M8 upper threaded hole, using the Isotta top handle or via the M6 and M8 threaded holes on the bottom. Controls ON/OFF of Sony a6600 Ergonomic camera focusing and shutter button for an easy use with gloves Lens release Rear control panel Upper control panel All controls are available on the housing Highlights Two fiber optic connections Three M16 holes for installation of accessories, e.g. syncro cords, vacuum valves, monitors Back housing completely detachable from the front housing Tray with lock for the easy insertion of the camera Single-hand closing knob for the back of the housing Aluminum buttons and dials with engraved symbols identical to camera controls Wide back display viewfinder glass Double O-Ring seals on all buttons and removable parts Moisture sensor with LED indicator (replaceable battery) Removable port -120 mm bayonet Ports security latch to prevent accidental opening Wide, rubber covered feet for solid footing on boat floors or sea floor M8 hole located on upper side of the housing for various accessories such as focus lights Two M6 holes located on housing bottom side for different accessories such as brackets for strobes or tripods External viewfinders can be mounted, INON X-2 compatible

The housing for Olympus OM-D E-M1 Mark III allows to capitalize on the camera full potential and to capture amazing pictures underwater. Product details An easy to use highly professional product has been created through techniques and innovations gained from years of experience. Easy access to all key/main camera controls, even with gloves, by means of clearly labelled lasered long life buttons. The back door has a large window glass for a fine camera display and optical viewfinder view and it is entirely detached from the front body to make easier the camera fitting. The housing stands with great stability due to sturdy and wide rubber feet located on the bottom. Ergonomic side handles are included. ONE HAND OPEN/CLOSE It's very easy to open and close Olympus OM-D E-M1 Mark III, without efforts by the user thanks to the upper helicoid and the bottom centered pins; the camera is placed easily into the housing on a sliding tray that keeps the camera robustly in place. PORTS AND EXTENSION RING A series of ports and extension rings are available in dedicated section. The removable port is fitted thanks to markers and a bayonet 102 mm connection to the Olympus OM-D E-M1 Mark III housing. The interchangeable port bodies and extensions rings combine to allow the use of most of lenses on the market for maximum versatility and performance.  LIGHTING Two fiber optic connections are placed in front of the built-in flash and allow the use of external strobe. CONSTRUCTION AND SAFETY Only the best materials are used to manufacture our housings such as anodized aluminum, which is anticorodal and thermo-coated, and stainless steel. A longlasting product that requires easy and simple maintenance by the user. Dual high precision and quality O-Ring seals protect and ensure a perfect and secure watertight for all movable and / or removable parts; a red alarm for humidity/water inside the housing is powered by a battery replaceable by the user. Working depth is 100 metres. Different accessories can be fitted directly on the handles or by means of an M8 upper threaded hole, using the Isotta top handle or via the M6 and M8 threaded holes on the bottom. Controls ON/OFF of Olympus OM-D E-M1 Mark III; Own camera strobe open/close; Ergonomic camera focusing and shutter button for an easy use with gloves; Lens release; Rear control panel; Upper control panel; All controls are available on the housing;

With the same attention to detail and robustness as the Isotta DSLR housings, the Isotta underwater housing for the GoPro Hero8 Black is a professional photographer's tool for underwater use. Easy access to all important camera controls, even with gloves on. The rear flap has a large window for a good view of the camera display and is completely separated from the front body; a rubber contour makes GoPro Hero8 Black camera attachment easy. A removable rear bonnet provides an excellent view of the display in any condition. Opening and closing with one hand It is very easy to open and close GoPro Hero8 Black without any effort by the user thanks to the button and the centring pins; the camera is absolutely stable and secure. Port, close-up AND wide-angle lenses The front port, which is equipped with high quality standards of materials, ensure perfect image quality. The flat housing port for the underwater housing by Isotta for the GoPro Hero8 Black has been created in the same size as the original, so you can use most of the accessories available on the market. Construction and safety Only the best materials are used in the manufacture of Isotta underwater enclosures, such as anodised aluminium, which is anti-corodal and thermally coated, and stainless steel. A durable product that requires only simple and quick maintenance by the user. Two high-precision and high-quality O-ring seals protect and ensure a perfect and safe watertightness for all moving and / or removable parts. The nominal depth is 200 metres. A hole on the bottom of the housing allows the GoPro Hero8 Black housing to be attached with a grip plate/strap. Various accessories can be mounted using the Isotta top handle or the M6 and 1/4 inch threaded holes on the bottom. Operating option GoPro Hero8 Black ON/OFF Shutter button Mode button