Top Handle for E2/F/C70/BGH1/BMPCC Housings

The Z Cam E2 The Z Cam E2 range consists of three models, the namesake E2, the E2C and the E2G.   The E2 is the true powerhouse of the range, featuring a 4/3" WDR CMOS sensor that produces 10-bit colour with up to 16 dynamic levels. C4K can be shot at up to 160 frames per second in a variety of ProRes flavours, as well as Z Cam's RAW codec ZRAW partial-debayer. An MFT lens mount means the E2 can be used with a wide range of open-source lenses from Panasonic, Olympus and Sigma.   Important camera specifications: Micro Four Third (MFT) WDR CMOS sensor. MFT lens mount 10-bit C4K at 160fps ProRes 422HQ or ZRAW The Nauticam NA-E2 Underwater Geäuse The NA-E2 sets the standard as the lightest and smallest RAW-ready cinema underwater gear ever produced. Nauticam is a leading supplier of Cinema underwater housings with offerings for RED, ARRI, Canon, PhantomFlex, Blackmagic, Sony and now Z Cam. The NA-E2 uses the N85 port system, which is shared with Nauticam's other MFT platform cameras, allowing easy  transition to the NA-E2 from other MFT Nauticam systems. The N85 system also provides access to Nauticam's premium professional optics such as WWL-1 and CMC-1/2. A dedicated mounting lever is located on the right side of the walker within easy reach of the adjustable ergonomic grips. 1/4"-20 mounting threads are located on the top and bottom of the walker, allowing easy mounting of cinematic accessories. The E2 supports the CMC-1/2. The E2 supports Sony NP-F series batteries and the NA-E2 matches this compatibility up to and including the FP-970. As with the NA-BMPCC2, the NA-E2 allows a Samsung T-5 SSD drive to be mounted internally as a recording medium, making the transition from recording to editing seamless.   The Z Cam E2 requires an external monitor and Nauticam offers several options for SmallHD and Atomos monitors. The NA-E2 has both one M28 and two M16 ports, supporting both HDMI 2.0 (M28) and HDMI 1.4 (M16) connections. HDMI output Required accessories for the HDMI 2.0 cable system NA25079 M28A2R210-M28A1R170 HDMI 2.0 cable (for NA-GH5V/E2 for use with Ninja V housing) *A special positioning cable clamp für NA25079 is required. Required accessories for HDMI 1.4 cable system NA16243 HDMI A-D cable in 0.5m length for RED DSMC2/C200/EVA1/E2 (for internal connection) NA25033 standard HDMI connector with M16 thread. (NA25033 is included in NA-058/502H/FHD5/502B-H Monitorgehüuse). Recommended monitor housing NA17920 NA-502B-H Housing for SmallHD 502 Bright Monitor (with HDMI 1.4 input support) NA17922 Nauticam Atomos Ninja V Gehäuse für Atomos Ninja V 5" 4Kp60 4:2:2 10-bit Reorder/Monitor/Player (without HDMI 2.0 cable) *With camera firmware 0.87, the maximum recording format for the Ninja V with 25079 HDMI 2.0 cable is 4K30P.

The Canon EOS C70 packs a lot of the features we love about cinema cameras into a small mirrorless style body.  With a Super35 sensor using Canon's next generation Dual Gain Output, the C70 also includes Dual Pixel CMOS AF autofocus, a built in ND filter and is the first EOS cinema camera to use Canon's new RF lens mount.  When you combine that with the "Canon Color" we have come to love underwater, this makes for one of the most compact and capable cinema cameras to date.   THE CANON EOS C70 CINEMA CAMERA The Canon EOS C70 is a compact form-factor cinema camera built around a Super35 Dual Gain Output (DGO) Sensor.  With 16+ stops of high dynamic range the C70 can record DCI 4K up to 60fps and 2K up to 120fps.  Without the extended dynamic range it can capture UHD 4K up to 120fps and 2k up to 180fps.  Integrated into the camera is a motorized 10-stop Neutral Density filter along with an air intake system allowing for unlimited video recording. KEY CAMERA SPECIFICATIONS: Super35 Dual Gain Output (DGO) Sensory DCI 4K 60p, Hi-Speed UHD 4K 120p/2K 180p Dual Pixel CMOS AF 16+ Stops of High Dynamic Range DIG!C DV7 Image Processory Canon Log 2 and Log 3 Gamma Dual SD Card Slots RF Lens Mount Built-in ND Filters  THE NAUTICAM NA-C70 UNDERWATER HOUSING Nauticam has long been producing industry-leading housings for Cinema cameras and have taken that experience to create the most advanced underwater cinema system housings available. Taking advantage of the small form factor of the C70, the Nauticam NA-C70 is ultra-portable yet offers full access to the camera's critical functions.  Regardless of where a button or control dial may lie on the camera body, Nauticam engineers obsess over making sure that access to that control on the housing be intuitively placed for ease of use to insure no shot is missed while searching for a button or dial.  To take this a step further, Nauticam has also integrated the Nauticam to Canon SDK Control Board in the rear door of the housing which places a variety of electronic control functions at your finger tips.  This connects to the camera through pogo pins between the rear housing door and the front camera tray eliminating the risk of straining any cables while opening the housing door for media or battery changes.   The Canon C70 present shooters with the ability to use both the available legacy EF lenses via an adaptor in addition to the native RF optics.  To support both the legacy and native lenses, Nauticam has integrated the NA-C70 into the N120 port system. Canon's EF to EOS R mount adaptors can be affixed to the camera before insertion into the housing. When using the EOS C70 inside the housing with the EF to EOS R adaptor and a supported EF lens, the port and extension ring arrangement will be identical to the same setup on a Nauticam Canon N120 EF-Mount housing.  Two lens release buttons, one for RF and one for EF, are located on the front of the housing to make lens removal through the port opening simple.  In addition to the standard EF to EOS R adaptors, there is also support for the Canon EF to EOS R 0.71x Mount Adaptor through an optional 16702 NA-C70 Camera Tray.   The housing will accommodate the Canon BP-A30 and larger BP-A60 batteries, providing plenty of run time. As with previous Cinema System housings, the Nauticam NA-C70 features large control knobs for focus and zoom which also feature marking disks that can be removed and marked with the desired lens position or focus information. INTEGRATED VACUUM CHECK AND LEAK DETECTION SYSTEM The Nauticam vacuum check and leak detection system is shipped with NA-C70 as standard equipment.  With the optional 25625 M16 Vacuum Valve II, this monitoring system provides constant updates on the water tight and safe-to-dive status of the housing. A simple color coded LED lighting system lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur. The Nauticam system is temperature compensated, eliminating false alarms caused by a change in outside temperature, or from a camera heating up on an action packed dive. PREMIUM PROFESSIONAL OPTICS Optical performance is just as necessary as camera performance and this becomes even more critical given the challenges of filming underwater. The Nauticam NA-C70 uses the same N120 Port System as the previous N120 cinema housings which makes for a seamless transition for those upgrading or looking to add an additional camera to their lineup.  While this system provides exceptional optical-glass and flat port solutions for a wide variety of EF and RF mount lenses, the real power can be realized using Nauticam's Water Contact Optics. This lineup of dry and wet lenses are conceived using commercial lens-design software to achieve truly unparalleled underwater image quality both for stills and video in both macro and wide-angle situations. The WACP-1 and WACP-2 achieve ultra-wide 130º fields-of-view with reduced distortion over conventional optics while featuring ~0" minimum focus distances, zoom through capabilities and unbeatable corner sharpness at even wide-open apertures such as F5.6. The SMC-1 and SMC-2 macro wet-optics, when used with the Canon 100mm F2.8L macro lens provide 2x and 4x magnification respectively and the SMC-1 actually provides a resulting image with increased contrast and sharpness than the 100mm lens itself can achieve in air without a magnifier. HDMI Recommended Configurations For HDMI 2.0 Cable System M24 adaptor for HDMI 2.0 Cable (NA25086) M24A3R140-M28A1R170 HDMI 2.0 Cable (for NA-A7SIII/C70 to use with Ninja V housing) (NA25094) Nauticam Atomos Ninja V Housing for Atomos Ninja V 5” 4Kp60 4:2:2 10-bit Reorder/Monitor/Player (excl. HDMI 2.0 cable) (NA17922) Nauticam Atomos Ninja V-S Housing for Atomos Ninja V 5” 4Kp60 4:2:2 10-bit Reorder/Monitor/Player (excl. HDMI 2.0 cable) with Atomos AtomX SDI Module* (NA17922S) *includes monitor hood, vacuum valve, SDI bulkhead (NA25058+NA25080)and internal SDI cable (NA25060). For HDMI 1.4 Cable System Standard HDMI Cable with M16 Thread (NA25033) M24-M16 Step Down Adaptor (NA25081) HDMI (D-A) 1.4 cable in 220mm Length (for connection from HDMI bulkhead to camera) *new item NA-502H Housing for SmallHD 502 Monitor (NA17906) NA-502B-H Housing for SmallHD 502 Bright Monitor (NA17920) NA-Shinobi-H Housing for Atomos Shinobi 5.2" 4K HDMI Monitor with HDMI 1.4 input (NA17923)

The RED Digital Cinema V-RAPTOR 8K VV is RED's latest flagship camera capable of recording REDCODE RAW in 8K resolution at up to 120 frames per second.  Combined with the Nauticam housing, it creates one of the smallest and easiest-to-use cinema systems on the market.  In addition, the Nauticam Raptor housing offers full control of the RED KOMODO through an optional camera sled.   RED Digital Cinema V-Raptor ST 8 X Cinema System The V-RAPTOR 8K camera features an 8K VV multi-format sensor with the ability to shoot 8K large format or 6K Super 35.  It has a dynamic range of more than 17 stops and can record R3D (REDCODE RAW) files directly onto CFexpress cards, eliminating the need for expensive proprietary media.  It also features Canon's new RF mount with full support for Canon's EF-to-EOS R lens adapter, so a wide range of focal lengths can be used.  The V-RAPTOR 8K VV is RED's most powerful camera to date and also one of the smallest cinema cameras available.  The feature set is clearly aimed at those who require professional specifications in a travel-friendly package, which accurately describes the majority of underwater filmmakers.   Important camera specifications: 8K VV 35,4 Megapixel CMOS Sensor (8192 x 4320) R3D files (REDCODE RAW) 17+ stops dynamic range Recording on CFexpress cards Canon RF lens mount Integrated Micro V-Lock battery interface Dual 12G SDI output Integrated 2.4" LCD screen with touch camera control Wireless control via smart phone Recording formats: REDCODE RAW 8K 8192 x 4320 at 120 fps 7K 7168 x 3780 at 140 fps 6K 6144 x 3240 at 160 fps 5K 5120 x 2700 at 192 fps 4K 4096 x 2160 at 240 fps 3K 3072 x 1620 at 320 fps 2K 2048 x 1080 at 480 fps REDCODE HQ 8K 8192 x 4320p with up to 60 fps  6K 6144 x 3240p up to 96 fps  4K 4096 x 2160p up to 240 fps  2K 2048 x 1080p up to 480 fps  REDCODE MQ 8K 8192 x 4320p up to 60 fps  6K 6144 x 3240p up to 160 fps  4K 4096 x 2160p up to 240 fps  2K 2048 x 1080p up to 480 fps  REDCODE LQ 8K 8192 x 4320p up to 120 fps  6K 6144 x 3240p up to 160 fps  4K 4096 x 2160p up to 240 fps  2K 2048 x 1080p up to 480 fps    RED Digital Cinema V-Raptor ST 8K Underwater Housing by Nauticam The enclosure supports both the RED V-RAPTOR 8K VV and the RED KOMODO through an optional insert (16250).  It has been designed in a similar way to the previous DSMC2 LT and Komodo housings to offer the most compact and travel-friendly system possible.  Raptor offers seamless integration with DSLR lenses and the same N120 connection system used in Nauticam DSLR and Cinema systems.  Enjoy unmatched user-friendly set-up and intuitive operation, including tool-free set-up and tear-down in minutes.  Batteries can be changed without removing the camera from the housing and lens changes are done in seconds.   The Nauticam Raptor housing uses the N120 Cinema Port system, which is shared with the other Nauticam cameras in the N120 platform and allows easy transition from other N120 Nauticam systems to the Nauticam Raptor. The N120 system also provides access to Nauticam's premium professional optics such as the WACP-1/2 and SMC-1/2. The housing also features adjustable handles with easy access to the cinema-style zoom and focus knobs.  On the top of the housing is a 1/4"-20 cheese plate that allows for a variety of accessory mounting points. In addition to Nauticam's traditional fully mechanical controls, the Raptor housing also features a set of backlit electronic controls.  These controls provide access to Iris+/-, Shut+/-, ISO+/-, WB on the left side of the housing and Pre-Record, FPS+/-, Playback, Play/Pause, Magnify and Tools on the top of the housing.   The Nauticam Raptor is covered by Nauticam's 2-year warranty. Lens support The RED V-RAPTOR 8K has a Canon RF lens mount, but Canon EF lenses are also supported through the Canon EF to EOS R adapter.  The Nauticam Raptor housing offers full support for Canon RF lenses along with the Canon EF to EOS R adapter and the Canon EF to EOS R adapter with variable ND filter or control ring.  On the left side of the housing is an easily accessible control wheel for smooth ND changes.  Regardless of the choice of EF or RF lens, changing lenses is quick and easy and requires no tools.  Note that when switching between RF and EF lenses, the camera must be removed from the housing to remove or install the RF-to-EF adapter.  Nauticam is constantly testing new lenses to offer optimised connection and extension combinations. Large cinema-style control wheels on the housing, within easy reach of the handles, allow precise manual focus and zoom control with the supported lenses when used with the appropriate lens kit.   The Nauticam Raptor housing, in conjunction with the 16410 N120-to-N200 port adapter, supports the use of selected cinema lenses and the associated N200 port system, as it is not limited to the use of DSLR lenses.  Installation is quick and easy and requires no tools, allowing seamless lens changes in the field - even when switching between DSLR and cinema lenses. Support for internal monitors In addition to the large viewing window for the Raptor's 2.4" LCD screen, Nauticam offers an optional rear housing for the Portkeys BM5WR monitor (16110).  This allows the monitor to be viewed by the cameraman from a natural filming position and provides an extremely slim system.  On the back of the monitor are control buttons for accessing the various tools of the BM5WR.   Support for external monitors The SmallHD 503 Ultrabright or Atomos Ninja V monitor can be mounted in the external Nauticam NA-503-S or Nauticam Atomos Ninja V-S enclosures and connected via SDI bulkheads and cables, allowing greater flexibility in positioning the monitor on the Nauticam Raptor enclosure.  SDI output Required accessories for the SDI cable system NA25058 M16 SDI-Bulkhead NA25060 SDI cable in 0.3 m length Recommended monitor housing NA17925S Nauticam NA-503-S Housing for Small HD 503 Ultrabright (SDI cable and bulkhead included) NA17922S Nauticam Atomos Ninja V-S Housing (SDI cable and bulkhead sold separately) Battery compatibility The RED V-RAPTOR 8K VV has an integrated Micro V-Lock battery interface.  Changing batteries is as easy as opening the housing, as the camera does not need to be removed to access the batteries.  The following batteries are supported in the housing: REDVOLT Micro-V 98Wh Anton Bauer Titon Micro V-Mount 45Wh/98Wh/140Wh bebob V-MICRO 45Wh/98Wh/150Wh/200Wh Core SWX NANO Micro 98Wh/147Wh Lithium-ion battery (V-mount) Fxlion NANO ONE/TWO Ultra Kompakt 50Wh/98Wh Hawk-Woods Mini V-Lok 14.4V 98Wh/150Wh Li-Ion battery IDX System Technology Imicro-150 14.5V 97Wh/145Wh Li-Ion V-Mount Battery SWIT PB-M98S 14.4V 98Wh Pocket Battery with D-Tap and USB Output (V-Mount) Ethernet remote control The Nauticam Raptor housing is designed to give the operator full control. However, it also supports an Ethernet surface feed in lengths of 5 m (Pole Cam) and 45 m (Studio). There is space in the housing to install a USB-C to Ethernet adapter, which would allow full control of the camera at the surface via the RedControl app.   Recommended Ethernet cables NA16261 Ethernet surface cable set in 45m length (incl. housing lemo bulkhead with integrated internal cable and external Duracell cables). NA16262 Replacement for enclosure Lemo Bulkhead with integrated Ethernet cable NA16263 Ethernet surface cable set in 5 m length (incl. housing Lemo Bulkhead with integrated inner cable and external Duracell cables). Vacuum control and leakage warning system The Nauticam Raptor housing features Nauticam's field-proven vacuum testing and leak detection system, which provides constant information on the housing's watertight and submersible status. By applying a light vacuum inside the housing using a reliable and compact hand pump, the system can ensure watertightness before entering the water and during the dive. A simple colour-coded LED lighting system, clearly visible on the back of the enclosure, indicates to the user if the vacuum is stable or if the enclosure is losing vacuum. Leak detection is integrated into the same circuitry so that an audible and visual signal sounds if water penetrates. The Nauticam system is temperature compensated so that false alarms due to changes in outside temperature or heating of the camera during an action-packed dive are avoided.    

THE Z CAM LINEUP The Z Cam flagship lineup is comprised of four models, the E2-F8, E2-F6, E2-S6, and the E2-M4.  The Nauticam NA-E2F housing will accommodate all four models.   Key Camera Specifications: E2-F8 8K 30fps, 6K 30fps, 4K 60fps, 10-bit color 12-Bit ProRes RAW Recording over HDMI to Atomos Ninja V Full Frame CMOS Sensor Dual native ISO 14 stops dynamic range ZRAW supported EF Mount Gigabit Ethernet for data, control, and live preview E2-F6 6K 60fps, 4K 120fps, 10-bit color 12-Bit ProRes RAW Recording over HDMI to Atomos Ninja V Full Frame CMOS Sensor 15 stops dynamic range ZRAW supported EF Mount Gigbit Ethernet for data, control, and live preview E2-S6 6K 60fps, 4K 100fps, 10-bit color 12-Bit ProRes RAW Recording over HDMI to Atomos Ninja V Super 35 CMOS Sensor 14 stops dynamic range ZRAW supported EF Mount Gigabit Ethernet for data, control, and live preview E2-M4 4K 160fps, 10-bit color 12-Bit ProRes RAW Recording over HDMI to Atomos Ninja V 4/3" WDR CMOS Sensor 13-15 stops dynamic range (16 stops with WDR enabled) ZRAW (partial debayer) MFT Mount Gigabit Ethernet for data, control, and live preview THE NAUTICAM NA-E2F HOUSING The NA-E2F follows suit with the original NA-E2 as one of the lightest and smallest raw-capable cinema housings ever produced. Nauticam has been a leader in cinema housings with offerings for RED, ARRI, Canon, PhantomFlex, Sony and now Z Cam. The NA-E2F uses the N120 Cinema port system, shared with Nauticam's other N120 platform cameras which allows for easy transition to the NA-E2F from other N120 Nauticam systems. The N120 system also provides access to Nauticam's line of professional premium optics such as the WACP-1/2 and SMC-1/2. The Z Cam E2-M4 can be used with either the Z Cam EF Mount or using the native MFT mount with Metabones EF-MFT Speed Booster Ultra 0.71x Adaptor.  When using the Metabones Speed Booster, the mounting position of the camera tray must be adjusted by the user.   There are 17 LANC control buttons ergonomically placed around the housing including dedicated iris+/iris-, record, focus near/focus far, eND+/eND-, and many more.  1/4"-20 size mounting threads are located on the top and bottom of the housing for easy mounting of cinema accessories. The NA-E2F supports an ethernet surface feed in 5m (pole cam) and 45m (studio) lengths.  The Z Cam E2 lineup offers a wide range of remote control options including live preview over ethernet.  This opens up the option of using an ethernet to lighting adaptor, then having an iPad or iPhone on the surface to allow monitoring and full control via the Z Cam app.   The housing also features adjustable handles with cinema style zoom and focus knobs.   The E2 lineup supports Sony NP-F series batteries and the NA-E2F matches this compatibility up to and including the FP-970. As with the NA-BMPCC2 and NA-E2, the NA-E2F allows for the internal mounting of a Samsung T-5 SSD drive as recording media making the transition from capture to edit seamless. The Z Cam E2 lineup requires an external monitor and Nauticam produces several options for both SmallHD and Atomos monitors.  To access the 12-Bit ProRes RAW Recording, you will need to use the Atomos Ninja V monitor with the Nauticam Ninja V housing. The NA-E2F features both an M28 and four M16 bulkheads supporting both HDMI 2.0 (M28) and HDMI 1.4 (M16) connections. HDMI OUTPUT Required accessories for HDMI 2.0 Cable System 25079 M28A2R210-M28A1R170 HDMI 2.0 Cable (for NA-GH5V/E2/E2F to use with Ninja V housing) 25088 Cable Clamp for NA-E2/E2F Housing with Screws Required accessories for HDMI 1.4 Cable System 16243 HDMI A-D Cable in 0.5m Length for RED DSMC2/C200/EVA1/E2 (for internal connection) 25033 standard HDMI bulkhead with M16 thread Recommended monitor housing 17922 Nauticam Atomos Ninja V Housing for Atomos Ninja V 5? Recorder/Monitor (with HDMI 2.0 support) 17920 NA-502B-H Housing for SmallHD 502 Bright Monitor (with HDMI 1.4 input support)