Panasonic Lumix GH6/GH7 Underwater Housing by Nauticam

on stock

€3,935.00*

1 in stock

Free shipping

Delivery time: 1-3 working days*

Product number: NA17720
HAN: NA-GH6
Available stock: 1

The Panasonic GH5 brought high-end video specs to the micro four thirds platform, setting the bar for what was possible in this compact form-factor. Since the GH5, the open-source MFT actor has grown, with a massive variety of lenses available and camera specifications that rival or exceed some of their larger siblings. The GH6 follows closely in the GH5's footsteps, adding incredible new video features and even some notable still image enhancements. The GH5, GH5s, and GH5II have been well represented in the underwater imaging space and the arrival of the GH6 is sure to be met with serious enthusiasm given the spec sheet and early reviews.

The Panasonic GH6 Camera

The GH6 is built around a brand-new 25MP CMOS sensor paired to Panasonic's Venus processor. The new sensor, assisted by the addition of a CFExpress B card slot and a built-in cooling fan, can capture up to 5.7K video in the edit-friendly ProRes codec. While ProRes is currently limited to the 17:9 full 5.7K at 29.97p frame-rate recording mode, future firmware updates promised expanding this to all 4K and HD modes as well. While not in ProRes, the GH6 can record 10-bit 4:2:0 DCI or UHD 4K at up to 120fps using LongGOP H.264 compression. Dropping that frame rate to 60p allows for 4:2:2 chroma subsampling, All-i recording at a heavy 800Mbps bitrate.

If 120fps is not slow enough, switching to HD opens up the possibility of 10-bit H.264 video at 240fps and even up to 300fps using Variable Frame Rate (VFR) mode which does not allow for audio recording. The menu for the various recording modes can be filtered to ease finding your desired mode and a personalized menu or 'My List' of selected modes can be created.

When shooting at 60fps or lower, the GH6's Dynamic Range Boost mode can be activated. This mode uses both a low-gain and high-gain simultaneous readout from the sensor to create a final image with up to 13-stops of dynamic range. The GH6 also features Panasonic's full V-log profile which maximizes dynamic range for post-processing. The GH5 model only had a limited version of this profile.

With a full-size HDMI port, the GH6 plays well with external monists and recorders, outputting a clean 4K/60p signal. Future firmware updates promise 4K/120P RAW output over HDMI.

Not just a video camera, the GH6 also has notable improvements for still imaging. A new handheld mode for the high-resolution 100MP imaging mode expands the situations in which this can be used as previous versions required a tripod.

For both stills and video, improvements in Autofocus and lower noise levels promise even better performance and image quality than was found in the GH5. Controls such as the prominent Record button remain similar aside from a button that gives direct access to the camera's audio settings and an additional custom function button on the front of the camera. The screen receives a refresh, as does the electronic viewfinder.

THE NAUTICAM NA-GH6 UNDERWATER HOUSING

The NA-GH6 builds on the pioneering NA-GH5 which supports the GH5, GH5S and GH5II camera models. Designed around the N85 Port System, the range of lens and port combinations for the NA-GH6 is unparalleled. Image quality can be improved even further with Nauticam's lineup of water-contact optics. These lenses, such as the WWL-1 and WWL-1B are designed to increase field-of-view, maximize corner sharpness and close-focus capability, all while maintaining zoom-through functionality. Using our unique bayonet mount system, these ultra-wide lenses can be switched for the powerful CMC-1 and CMC-2 macro optics underwater. This system makes the NA-GH6 the perfect underwater imaging system for both stills and video allowing for unparalleled wide and macro performance on the same dive without compromising image quality.

MISSION CONTROL

Designed with our Mission Control philosophy, the controls of the NA-GH6 are placed where they are needed most with essential controls for exposure and focus located within easy reach of the handles. A dual thumb lever near the right handle provides easy access to the 'REC' and 'AF-ON' buttons. A dual-action lever that triggers the 'Fn1' and 'Fn2' buttons is easily reached forward of the right handle as well.

HDMI VIDEO OUTPUT

With an M24 bulkhead and an M10 threaded mount, the NA-GH6 is easily paired with an external monitor or recorder over HDMI 2.0 or 1.4. With future firmware updates promising RAW video output at up to 4K/120p over HDMI, the NA-GH6 will be ready to meet that Need.

MANUAL OPTICAL STROBE TRIGGERING

Rapid fire manual triggering is available with the 26309 Mini Flash Trigger.  The Panasonic DMW FL-70 Flash Unit is not compatible with the GH6.  

VACUUM CHECK AND LEAK DETECTION SYSTEM

The NA-GH6 underwater housing by Nauticam comes with electronics pre-installed for Nauticam's Vacuum Check and Leak Detection system, requiring only the optional M14 Vacuum Valve (25624). This monitoring system provides constant updates on the water tight and safe-to-dive status of the housing. A simple color coded LED lighting system lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur. The Nauticam system is temperature compensated, eliminating false alarms caused by a change in outside temperature, or from a camera heating up on an action packed dive.

Arm Attachment: 1-inch ballhead
Body Material: aluminum
Camera System: Mirrorless (MIL)
Camera manufacturer: Panasonic
Strobe connector: optical Sea&Sea
Tripod connection: Thread ¼
portsystem: N85
Weiterlesen
Technical data

  • Dimensions: 331mm(W) x 176mm (H) x 136mm(D)

  • Weight in air: 2.8 kg

  • Buoyancy in water: -0.5kg (incl. camera and batt)

  • Depth Rating: 100m

Scope of delivery

  • Panasonic Lumix GH6/GH7 Underwater Housing by Nauticam

  • Spare Main O-ring, O-ring remover and lubricant

  • Two plugs for optical fiber cable ports

  • 2x handles with mounting balls

  • Panasonic CR-2032 Batter (for moisture alarm)

  • Set of Allen Keys

  • Manual Instruction Card

  • Padded Housing Bag with shoulder strap



Only the components of the item that are listed here will be delivered. Accessories and/or decoration shown in our images are for demonstration purposes only. In particular, we would like to point out that the purchase of an underwater housing does not include a camera and often not a port nor an external viewfinder. If you have any questions about the configuration of your system, do not hesitate to contact us.


0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.

Spare parts

on stock
Port Opening Cap for MIL Camera Housings (N85)
Protect the housing's port-sealing surface and prevent dust infiltration into the housing when not in use with this replacement housing cap for MIL housings.

€35.00*
on stock
M14 plug for housing (with o-ring)
Plug for M14 bulkhead on underwater housings.

€23.00*
on stock
Housing o-ring 90122
Spare housing O-ring for the following Nauticam underwater housings: NA-7D NA-80D NA-D7100 NA-D7200 NA-D7500 NA-GH5 NA-GH6 NA-G9 NA-REDLT NA-Z7II/Z6II Furthermore, this O-ring also fits N200 ports from Nauticam.

€22.00*
on stock
Full Frame Angle Viewinder 32°/ 1:1
The next generation Nauticam Full Angle Straight Viewfinder is the perfect addition to your housing as it provides a bright, clear and undistorted 1:1 image of the camera’s viewfinder and is essential for precise focusing and artistic composition.  This viewfinder is also available in an 0.8:1 version that can also accommodate viewing of the entire image field on cameras with larger EVFs such as the Sony A1. The Full Frame Angle Viewfinder also provides more clearance for your regulator allowing for more a more comfortable viewing position, installs in seconds without tools and retains the hassle-free underwater dioptric adjustment feature. The viewfinder can also be rotated when using the camera in a portrait orientation. INTRODUCING NAUTICAM FULL FRAME ANGLE VIEWFINDER 32°/ 1:1 For over a decade, Nauticam’s Enhanced Viewfinders have been known for superior optics, tack sharp performance and first-of-its-kind underwater dioptric adjustment. Anyone who has used these instruments has grown to appreciate what an asset they can be to any underwater photographer. But the camera world has seen radical changes in technology in the last ten years, including ever increasing size and resolution of Electronic Viewfinders (EVFs) found in the latest high-end mirrorless cameras. These newer EVFs challenge even the finest enhanced viewfinders for underwater housings. In response to this technological evolution, Nauticam is excited to introduce the next generation of Enhanced Viewfinders designed to meet and exceed the requirements of all the current digital camera EVFs, as well as what is expected in the near future. The new Full Frame Straight Viewfinder employs entirely new optics to allow distortion free viewing without clipping the image frame. With the new viewfinders, reviewing images in playback or navigating the menus through the EVF has never been so easy. 32º/1:1 VS. 42º/0.8:1 Because different photographers have different needs and priorities, Nauticam offers the Full Frame Angle Viewfinder in two options. The 1:1 viewfinder option offers the most magnification available for underwater viewing while preserving the image field and surrounding data on most cameras. This viewfinder is a breakthrough in performance on high resolution EVFs and is an absolute joy on traditional DSLRs. The level of detail rendered is unequaled in the industry. For those utilizing cameras with known EVF challenges such as the Sony’s A1 and A7SIII cameras, or just for the photographer who wants as much working room on the viewfinder field-of-view as possible, Nauticam offers the new 0.8:1 version. The 0.8:1 viewfinder offers an equally crisp and bright EVF display as the 1:1 viewfinder, with slightly less magnification for uncompromising corner to corner image viewing or better imaging of shooting data. HASSLE-FREE UNDERWATER DIOPTRIC ADJUSTMENT The much-loved dioptric adjustment is still featured and allows for easy eyesight adjustment in-water without disassembly of the viewfinder.  as well as the simple installation and removal that takes only seconds. TOOL FREE INSTALLATION The Nauticam Full Frame Angle Viewfinder can be installed in seconds without any tools.  The viewfinder is a direct replacement of the stock 0.66X viewfinder on DSLR and many full-frame mirrorless housings but requires an easily installed adapter on certain MIL housings. The viewfinder can also be rotated when using the camera in a portrait orientation. Whether future proofing a viewfinder purchase for your current rig, or patiently waiting for a viewfinder worthy of the latest pro mirrorless camera you are diving, these cutting-edge viewfinders are the new industry standard to be looking at. <iframe width="560" height="315" src="https://www.youtube-nocookie.com/embed/1AeT-02Mrdo?controls=0" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" allowfullscreen></iframe>  

€1,590.00*

Flash Trigger

Mini Flash Trigger for Panasonic Housings
Nauticam flash trigger units allow the use of robust and reliable fiber optic cables to fire external strobes, providing dependable, rapid-fire flash triggering over fiber. Flash triggers allow motor drive shooting sequences, perfect for fast moving action. This flash trigger plugs into the camera hotshoe and provides an optical signal for fast, continuous strobe firing. Automatic TTL flash control is not supported by this flash trigger, flash power is set manually on the strobe itself.

€295.00*
on stock
o-Turtle MANUAL trigger for Olympus and Panasonic systems
A reliable Manual trigger for underwater photographers that works via fiber optic cable or sync cord. o-TURTLE  MANUAL This Manual trigger was developed for Olympus and Panasonic MILC camera systems. The o-TURTLE MANUAL is the perfect choice for the demanding underwater photographer who needs an easy to use, affordable, and reliable trigger that works with the most popular underwater strobes (Inon, Ikelite, Sea&Sea, Subtronic, OneUW, Retra, Backscatter miniflash etc). Features: 1st or 2nd curtain, HSS mode (Over 1/160 shutter speed the TURTLE switch to HSS mode.). The Internal charging system works via a USB AB connector. Compatible camera models are the Olympus and Panasonic Mirrorless cameras. Compatible strobes (as of 01.09.2020.): Ikelite DS160, Inon Z240/Z330, Sea&Sea YS-250, YS-D1, YS-D2, D2J, YS-D3, YS-110a, Subtronic Pro 160, Pro 270, One UW, Retra (old and new models).    Retra PRO (HSS mode available!) The o-TURTLE MANUAL is a user-friendly trigger: you simply connect the LED or the sync cord connector and you can take hundreds of shots without charging. The TURTLE MANUAL triggers fit into the most popular underwater housings (tested with Nauticam, Subal, Hugyfot, Isotta, Ikelite, Seacam, Saltedline models). If you want to connect your strobe via fiber optic cable we recommend using multicore cable! (Please write Us which kind of connection do you use. We also recommend writing us what kind of underwater strobe will you control with the TURTLE trigger so we can be sure you got a product which fulfills your needs.) There is also a USB cable in the package for charging.

€275.00*
on stock
i-Turtle 2 Smart TTL Trigger for Panasonic and OM Systems
A reliable TTL and Manual trigger which works via fiber optic cable or sync cord. i-TURTLE 2 SMART underwater photo trigger for Nikon mirrorless camera models This underwater TTL trigger was developed for Nikon mirrorless camera systems. The new i-TURTLE 2 SMART TTL trigger works in i-TTL Unified mode where it's possible to change between Manual and TTL modes from the camera. The i-TURTLE 2 SMART underwater flash trigger is the perfect choice for the demanding underwater photographer who needs a reliable TTL converter that works with the most popular underwater strobes. The i-TURTLE 2 SMART has a new, more durable metal hot shoe.  Compatible camera models (as of 11.2022.): Nikon Z30, Z50, Z6, Z6-2, Z7, Z7-2, Z9 Compatible strobes  (as of 09.2021.): Ikelite DS160, Inon Z240/Z330, Sea&Sea D2J, YS-D3, Retra Pro X and Backscatter Mini Flash 2 (HSS mode available in manual (FP) mode!) As we regularly add new models please download and run the software before purchasing, to check the compatible camera and strobe types.  The i-TURTLE 2 SMART is a state-of-the-art user-friendly TTL converter that can be upgraded by the user via the USB port. You can set the strobe characteristic and some special features too. Upon upgrading you simply choose the strobe and the camera model from the software and download the setup to the TURTLE's memory. The TURTLE SMART triggers fit into the most popular underwater housings (tested with Nauticam, Subal, Hugyfot, Isotta, Ikelite, and Seacam models).  The Internal charging system works via a USB AB connector and the included USB cable.  The package contains the i-TURTLE 2 SMART TTL trigger for Nikon mirrorless cameras and the LED panel (with the new, brighter 150 cd LEDs) or the special cable for sync cord connection. If you want to connect your strobe via fiber optic cable we recommend using multicore cable! (Please write Us about which kind of connection you use. We also recommend writing us about what kind of underwater strobe will you control with the TURTLE trigger so we can set up the unit you ordered.)  The setup software for PC is downloadable from this website: https://www.trt-electronics.com/content/media/docs/i_turtle_2_smart_setup_software.zip  Mac version is coming soon!  There is also a USB cable in the package for charging and upgrading.

€365.00*
on stock
M14 Vacuum Valve II
Installing vacuum valve to housing Remove the plug of the M14 accessory port from the housing. Remove the cap from the vacuum valve. Tighten the vacuum valve to the housing with the tool provided. Building up vacuum Remove the cap of the vacuum valve. Connect the hand pump to the valve and pump several times until it reaches the target vacuum level. The LED light will turn flashing yellow while vacuum is building up, then steady green when the target vacuum level is reached. Attention: After the target vacuum is reached, i.e. steady green light, attach the cap back to the vacuum valve. It is recommended to leave the housing for at least 20mins to ensure it is sealed. If the LED light changes from steady green light to rapidly flashing yellow light, that means there is a leakage and please check every O-ring and conduct the vacuum test again. Please ensure that the cap is attached back to the vacuum valve before going underwater. Vacuum can be released by pushing the red release button. Attention: Please DO NOT attempt to go over the designated vacuum level, i.e. stop pumping when the LED turn green. Excessive vacuum level may lead to the malfunction of the camera and lens. Note: Although the vacuum indicator is designated to compensate for a certain amount of temperature variation, it is recommended to conduct the vacuum test in an environment where the temperature is stable. After set up, the meaning of the LED indicator in the housing: Flashing “Blue” light: Standby mode. The moisture alarm is active, and the system is ready for vacuum indication whenever a vacuum is detected. Flashing “Red” light with beeping sound:Moisture is detected. Flashing “Yellow” light: Some vacuum is detected, target vacuum level is not reached. Steady “Green” light: Target vacuum level is reached. Rapidly flashing “Yellow” light: Vacuum is dropping. (Will occur only after target vacuum level is reached) Rapidly flashing “Red” light: Vacuum is totally lost. Circuit stalled until switched off. (Will occur only after target vacuum level is reached)

€205.00*
45° viewfinder for Mirrorless housing from Nauticam
Nauticam's enhanced 45° angle viewfinder is the perfect complement to your MIL housing, providing a bright, clear and undistorted 1:1 image of the camera's viewfinder and a 45° viewing angle. The viewfinder can be rotated to any angle, which is important when shooting in a vertical orientation. The 45º viewfinder also provides more clearance for your controller and allows for a more comfortable viewing position. Introducing the Nauticam 45° viewfinder. Long or short sighted? The viewfinder features an external knob for vision adjustment; hassle-free diopter adjustment can now be easily made underwater without having to disassemble the viewfinder. Proven construction The body is made of anodised aluminium and all lens elements and prisms in the viewfinder are precision ground and multi-layer coated to ensure optimum light transmission and no distortion. Installing the viewfinder With Nauticam housings, it is easy to switch between the standard 0.66x and Enhanced 45° viewfinder, in most cases without tools or adapters. With optional adapter kits, it can also be adapted to Ikelite, Aquatica, Sea & Sea and Nexus housings.

€1,210.00*

HDMI 1.4

Underwater Monitor WED-7 Pro
The WED-7 Pro is a professional HD monitor specially designed for underwater photographer. The product is made of aluminum alloy, with carbon-fiber trim panels and delicate stainlesssteelchrome-plated buttons. It is High-end and professional product. The underwater monitor uses a full HD FHD display, plays for 4K HDMI input and outout,and is configuredwith a variety of auxiliary tools, so that the photographer is more freely and with ease in shooting. Professional auxiliary shooting function: The product has a variety of professional shooting functions, such as: brightness histogram, audio column, auxiliary focus, false color, exposure prompt, monochrome display, nine grid, square, etc., all can better help the photographer effectively monitor and control the picture to the process of shooting and creating works. Long back-up life: The product is powered by two 18650 lithium batteries, the longest working time can be up to 3.5 hours, and the product has a battery indicator light, so that the photographer can observe the battery power at any time. 4K signal transmission: The product supports 4K HDMI input and output, and high-definition pictures of the camera can be displayed on the monitor in real time through 4K signal transmission of HDMI. 7-inch FHD: The product features a 7-inch full HD screen with 1920x1200 resolution and 440PPI pixel density, as well as 500CD /m² high brightness and 1200:1 high contrast. Ultra-wide viewing Angle: The choice of IPS display has an ultra-wide viewing Angle of 160°, which allows the photographer to easily get a clear picture when adjusting the position. True color: The product uses the trustworthy Rec.709 high-definition color standard in the professional field, and accurately restore the color without distortion or color bias, it shows the real image. Hood: The product design has a professional hood, so that the photographer can get the ideal viewing effect when using in the outdoor bright light. Excellent image processing engine: the product is matched with an independent image processing engine, which improves the light and dark effect and contrast of the picture, so that the picture quality is more exquisite. Excellent deep waterproofing effect: UP to 80m/263ft IP68 waterproofing grade: professional waterproofing design, full process technology and quality control, as well as real simulation of various deep water conditions of pressure testing.

€1,568.00*
on stock
HDMI (D-A) Cable in 20mm length
This 200 mm HDMI cable is used for internal connection between the HDMI housing connector and the HDMI camera output.

€84.00*
on stock
WED-5 Underwater Monitor
5-inch HD Underwater Monitor by Weefine A lightweight made of aluminium that is travel-friendly and practical. This is how the WED-5 underwater monitor from Weefine presents itself. With a brightness of just under 500 nits and 16.7 million colours, it allows you to fully assess your shots even in the water. The monitor housing is milled from aluminium in the highest precision and then protected with a solid surface anodisation. This makes the monitor resistant to salt water and overheating.

€998.00*

Tripod

Mounting Ball Set for Tripod (for NA-GH5/G9/GH6)
This kit allows for the secure mounting of industry standard 1? ball mounts directly onto the NA-GH5/GH6/G9 housing that provides a low-profile attachment point for tripod legs or accessory light arms.

€77.00*
Stativplatte für NA-A7S/GH4/A7II/GH5/A9
Stativplatte, die an der Unterseite des Gehäuses befestigt wird und drei Standard 1 Zoll Kugelköpfe für Stativbeine oder anderes Zubehör bietet. HINWEIS: Eignet sich nicht für die Cinema-Gehäuse von Nauticam

€580.00*

HDMI 2.0

Atomos Ninja V Underwater housing by Nauticam
With more cameras offering high quality HDMI video output, the Atomos Ninja V steps in, not only as a stunning monitor but also as a recorder of 4K 60p 4:2:2 10-bit video to on-board SSD drives in edit-friendly ProRes or Avid formats. The Nauticam NA-Ninja V, when used with supported housings and cameras, allows for the connection of the Ninja V over HDMI 2.0 in addition to providing easy access to the Ninja V controls underwater. Atomos Ninja V The Atomos Ninja V is an exceptional monitor, featuring a bright 1000 nit 10-bit HDR 5.2" screen that can display over 10 stops of dynamic range with compatible cameras. The monitor includes a variety of exposure and focus assist tools to insure your footage is properly exposed with critical focus. In addition to being an extremely capable monitor, the Ninja V is also a recorder. When used with compatible cameras over HDMI 2.0, the Ninja V can record 4K at 60p in 10-bit 4:2:2 ProRes or DNxHR formats to Atomos AtomX SSDmini solid state drives. With a 1TB SSDmini drive, the Ninja V can record up to 150 minutes of 4K video. EXPOSURE TOOLS  The Ninja V exposure guides include a Waveform for luminance, RGB Parade for color balance, and Vector Scope for hue and saturation. These tools, especially useful for the underwater filmmaker, allow accurate and fast judging of exposure, even in the most uncooperative lighting scenarios. Even when recording Log or HDR footage, using Rec.709 or HLG monitoring displays the video on the screen adjusted to the levels of the chosen standard.. FOCUS TOOLS Critical focus can be achieved using various peaking tools. Focus Peaking Color displays the original color image with the sharpest areas outlined in a selectable color. Focus Peaking Mono provides the same overlay but on a monochrome image. Focus Assist Outline shows only the false color outline on a black background of the sharpest Areas.   THE NAUTICAM NA-NINJA V UNDERWATER HOUSING The Nauticam NA-Ninja V builds on the strong foundation Nauticam has built with previous Atomos monitor/recorder housings but is built around the new M28 large-bore bulkhead that supports HDMI 2.0. The Ninja V is easily mounted in the housing, dropping in without trays or other mounting accessories and is held in place by two rotating locking levers. The Ninja V features both an HDMI 2.0 input as well as an output and the NA-Ninja V supports both as well. With dual M28 bulkheads, a second HDMI cable can be run to another monitor. The Ninja V allows for the application of. cube format 3D LUTs to this output signal. The NA-Ninja V supports up to the NP-F970 size battery which provides up to two hours of run time. A CR-2032 battery powers the vacuum check and leak detection system. When used with the included Vacuum Valve, the system gives real-time feedback about the watertight integrity of the housing through an easily visible multi-color LED on the top of the housing. Access to the touchscreen controls of the Ninja V are handled via a series of buttons and a selector knob beneath the screen of the housing including PLAY, REC, MON, RGB, PEAK and the Muti-Selector Lever.  

€2,435.00*
on stock
HDMI 2.0 Cable M24A2R200-M28A1R170 by Nauticam
This is the HDMI 2.0 cable necessary to use the Housings NA-alpha1, NA-GH6 und NA-A9III with the 17922 Nauticam Atomos Ninja V Housing for Atomos Ninja V 5” 4Kp60 4:2:2 10-bit Reorder/Monitor/Player. Note: this cable supports RAW 16bit 4.2K (4264 x 2408) up to 59.94p output but actual capture quality is subject to recorder capabilities.

€295.00*

Ball heads

on stock
M10 Strobe Mounting Ball for Housing
Provides an additional ball mount for housings with available M10 threaded mount. Installation Guide: Nauticam M5 & M10 Strobe Mounting Balls from Nauticam on Vimeo.

€40.00*
Monitor Housing Mounting Adaptor to use with NA-GH4/GH5S/V/GH6
This kit replaces the standard handle top plates to enable the monitor housing to be mounted on the NA-GH4/5/6 underwater housings.

€190.00*
on stock
Strobe mounting ball for cold shoe
Standard 1" ball mount that attaches to the cold-shoe mount of compatible housings. Specially designed metal plate prevents the ball mount from slipping off even if it becomes slightly loose.

€48.00*
on stock
M5 Strobe Mounting Ball for Housing
Strobe mounting ball that attaches to M5 threaded mount on select housings. Installation Guide: Nauticam M5 & M10 Strobe Mounting Balls from Nauticam on Vimeo.

€27.00*