Manual Flash trigger for Canon

Of course, a camera of this size deserves the best housing to take it underwater. Existing NA-5DMKIII housing owners - stop reading here, because this housing will work just fine with the 5DS. But Nauticam can't rest on laurels, so they simply had to produce the NA-5DSR and refine the NA-5DMKIII housing even more. The Nauticam NA-5DMKIII is incredibly popular and well-liked by their users. Many of the controls for the NA-5DSR are based on the NA-MKIII and take advantage of how stable this housing is. However, the Nauticam designers were able to make improvements. Small ¨changes, of course, but each incredibly well thought out - designed by underwater photographers, for underwater photographers. As an example of a small but important ¨change, the right side of the housing has been made less "ücluttered" by moving the video/still switch to the top of the housing and combining the ISO and DOF preview buttons into a tactile rocker that makes accessing both controls especially easy. Perhaps the biggest change is the addition of the patent-pending Multi-Controller. This brings the joystick controls closer to the right hand for easier access. The piano keys für Set and Q have been beautifully designed to make room for them, creating a user interface that is both beautiful and functional. Simple buttons such as Menü, Picture Style, Rate, Zoom Out, and Trash have been adjusted so that you can reach these buttons more easily with your left hand. The shutter is in the new paddle style - exceptionally easy to use, even with thick gloves, while maintaining amazing tactile feel for using the half-pressure of the 5DS shutter. The NA-5DSR includes strobe mounting balls and lightweight laser-cut stabilitäts mounts.  System Specifications: Flash output dual Nikonos connectors pre-installed. Spare O-ring 90134 Vacuum system electronics pre-installed Use with Canon 5DMKIII Because the 5DS, 5DS R, and 5D Mark III share the same basic body housing, this housing can be used with all three cameras. This provides incredible flexibility.... Shoot for high resolutions with the 5DS R on a dive, then switch to the 5D Mark III for its excellent low-light capabilities. Finally, the NA-5DS is slightly lighter than the original NA-5DMKIII.... so much so that the additional lift required for most applications is reduced or eliminated. The result is a housing that is a dream for underwater use.. View finder The standard optical glass viewfinder is very good and travel-friendly, but many photographers prefer the convenience of a magnified viewfinder with adjustable diopters. Nauticam produces a "straight" 180º magnifying viewfinder and a 45º angled magnifying viewfinder to facilitate the tight-space work often associated with macro shooting. Both viewfinders feature high-quality optics and allow bright viewing of the entire image. A patented external diopter adjustment allows for personalized, pin-sharp adjustment underwater. Viewfinder changes can be performed in less than 30 seconds without tools. Exceptional composition and focus accuracy have never been so accessible.. High-quality professional optics. Experienced photographers know that a camera is only as good as the lens in front of it, and the same goes for the choice of optics for an underwater camera system. Four optically coated glass dome ports (diameters 250mm, 230mm, 180mm and 140mm) and a range of acrylic ports support common lenses from Canon, Sigma and Tokina.  Port configurations are extensively tested at Nauticam to determine the ideal extension ring length for best performance.. For macro and super macro photography, the Nauticam Super Macro Converter is a revolutionary accessory. It is a completely proprietary design optimized for use in water. Water contact correction provides the highest overall sharpness, free of chromatic aberration and violet fringing, with imaging ratios of more than 2:1 when used with an EF 100mm f/2.8L IS USM macro lens..

Die wichtigsten Kamerasteuerungen sind von den ergonomischen, gummierten Griffen aus leicht erreichbar.  Eine unglaubliche Menge an Designressourcen gehen in die Entwicklung dieses Layouts ein, aber dieser Aufwand zahlt sich mit einer beispiellosen Benutzerfreundlichkeit aus. Die Bedienelemente am Gehäuse sind genau dort platziert, wo sie für den einfachsten Zugang im Wasser sein sollten, unabhängig vom Kamerabau. Ein großer, geformter Auslöserhebel befindet sich am rechten Griff für die Zeigefingerbedienung und verfügt über einen patentierten Zahnradmechanismus, der die Empfindlichkeit für das taktile Gefühl von halbem und vollem Durchdrücken verbessert. Der rechte Daumenhebel wurde durch eine ergonomischere Positionierung verbessert.  Dieser Hebel greift sowohl auf AF-On als auch auf die Videoaufzeichnung zu. Das Multi-Controller-Pad ermöglicht die volle multidirektionale Nutzung des 8-Wege-Controllers, während gleichzeitig das hintere Befehlsrad auf der rechten Seite des Gehäuses verlagert werden kann. Kein anderes Gehäuse kommt an diese Art von ergonomischem Zugang zu diesen kritischen Bedienelementen heran. Es gibt sogar eine praktische Ein-/Aus-Taste und ein Anzeigefenster für die Verwendung mit dem optionalen TTL-Blitztrigger für Canon (26321). SUCHER Der standardmäßige optische Glassucher ist sehr gut und reisefreundlich, aber viele Fotografen bevorzugen die Erleichterungen eines vergrößerten Suchers mit einstellbaren Dioptrien. Nauticam produziert einen "geraden" 180º vergrößernden Sucher und einen um 45º abgewinkelten vergrößernden Sucher, um die Arbeit auf engstem Raum zu erleichtern, die häufig mit Makroaufnahmen verbunden ist. Beide Sucher verfügen über eine hochwertige Optik und ermöglichen eine helle Betrachtung des gesamten Bildes. Eine patentierte externe Dioptrienverstellung ermöglicht eine persönliche, gestochen scharfe Anpassung unter Wasser. Sucherwechsel können in weniger als 30 Sekunden ohne Werkzeug durchgeführt werden. Außergewöhnliche Zusammensetzung und Fokusgenauigkeit waren noch nie so zugänglich. HOCHWERTIGE PROFESSIONELLE OPTIK Erfahrene Fotografen wissen, dass eine Kamera nur so gut ist wie das Objektiv vor ihr, und das Gleiche gilt für die Wahl der Optik für ein Unterwasserkamerasystem. Vier optisch beschichtete Glaskuppelports (Durchmesser 250 mm, 230 mm, 180 mm und 140 mm) und eine Reihe von Acrylports unterstützen gängige Objektive von Canon, Sigma und Tokina.  Die Anschlusskonfigurationen werden bei Nauticam ausgiebig getestet, um die ideale Verlängerungsringlänge für beste Leistung zu ermitteln INTEGRIERTES VAKUUMPRÜF- UND LECKERKENNUNGSSYSTEM Das Nauticam Vakuumprüf- und Leckerkennungssystem ist serienmäßig mit NA-6DMKII erhältlich. In Kombination mit einem optionalen Vakuumventil liefert dieses Überwachungssystem ständige Updates zum wasserdichten und tauchsicheren Zustand des Gehäuses. Der Bediener kann auf einen Blick den wasserdichten und tauchsicheren Zustand des Gehäuses erkennen. Ein einfaches, codiertes LED-Beleuchtungssystem zeigt dem Benutzer an, ob das Vakuum stabil ist oder ob das Gehäuse Vakuum verliert. Die Leckageerkennung ist im gleichen Stromkreis integriert, so dass bei Wassereintritt eine akustische und optische Anzeige erfolgt. Das Nauticam-System ist temperaturkompensiert und eliminiert Fehlalarme, die durch eine Änderung der Außentemperatur oder durch die Erwärmung einer Kamera bei einem actionreichen Tauchgang verursacht werden.

THE CANON EOS R5C CAMERA The Canon EOS R5C is the latest in Canon's full-frame mirrorless camera lineup which has gained unprecedented demand.  It features the RF lens mount which has the same large 54mm diameter but the ability to have larger rear lens elements that are closer to the sensor gives increased corner and outer edge sharpness.  The R5C uses an all new 45MP CMOS sensor with in-body image stabilization which can reduce shake by up to 8 stops.  The camera's Dual Pixel autofocus system uses 1053 autofocus points across the entire frame.   It is also capable of recording 8K video at 24p or 30p and 4K at up to 120p.   The EOS R5C can also use the large EF-mount lens lineup via three optional adapters, a simple EF to R adapter, one which supports the customizable control ring and another that features a drop-in filter mount. Key Camera Specifications 45MP full-frame Dual Pixel CMOS sensor 8K Video, with option for RAW or 10-bit 4:2:2 C-log or HDR PQ Up to 4K/120p, or oversampled 4K up to 30p 100% coverage Dual Pixel II AF system 12 fps / 20 fps burst (mechanical / electronic shutter) 5.76M-dot OLED EVF with 120fps max refresh rate 3.2" 2.1M-dot fully articulating touchscreen 10-bit HDR photos in HEIF format 1x CFExpress slot, 1x UHS-II SD slot Weather sealing   THE NAUTICAM NA-R5C UNDERWATER HOUSING FOR THE CANON EOS R5C CAMERA The NA-R5C underwater housing follows suit with Nauticam's drive for innovation. Both the Canon EOS R5C and EOS R present shooters with the ability to use both the available legacy EF lenses via an adapter in addition to their native RF optics.  To support both the legacy and native lenses, Nauticam has integrated the NA-R5 into the N120 port system. Canon's EF to RF mount adapters can be affixed to the camera before insertion into the housing. When using the EOS RC5 inside the housing with the adapter and a supported EF lens, the port and extension ring arrangement will be identical to the same setup on a Nauticam Canon N120 DSLR. As the RF lens lineup emerges, dedicated port and extension ring combinations will be listed on the Port Chart. Two lens release buttons, one for RF and one for EF lenses used with the optional Canon adapter, are located on the front of the housing to make lens removal through the port opening simple. Mission Control Nauticam engineers are obsessed with getting the underwater image maker unfettered access to all the necessary controls, with as many within easy reach of the ergonomic rubberized handles. This Mission Control philosophy extends to the NA-R5C where a dual thumb lever and dual sub-lever are placed by the right handle. The upper thumb lever activates the "AF-On" and the lower the "Q" buttons while the sub-lever corresponds to the "M-Fn" and "Record" buttons. Near the left handle is a thumb lever for "Playback" as well as a dedicated switch to change from using LCD to the EVF. Large knurled and rubberized control dials access the camera's "main" and "sub" command dials. The two-stage trigger allows for smooth focus and firing activation. Additional buttons for "Menu", "Focus Point Selection" and others are also easily reached from the handles. An additional control wheel is located on the left side of the housing and will interface with the control ring on the supported EF to EOS R Mount Adapter with Control Ring using the optional gear (NA19561). Flash Triggering Flash triggering is achieved via one of two optional Flash Triggers, a manual LED trigger (NA26301) or a TTL Flash Trigger (NA26321) that use the built-in fiber optic bulkheads with optional fiber-optic cables to trigger supported strobes. For controlling strobes that do not support fiber optic flash triggering, a variety of legacy hot-shoe flash control bulkheads are available. INTEGRATED VACUUM CHECK AND LEAK DETECTION SYSTEM The Nauticam vacuum check and leak detection electronics are shipped with the NA-R5C as standard equipment. Combined with an accessory vacuum valve this monitoring system provides constant updates on the water tight and safe-to-dive status of the housing. A simple color coded LED lighting system lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur. The Nauticam system is temperature compensated, eliminating false alarms caused by a change in outside temperature, or from a camera heating up on an action packed dive.

Introducing NA-1DXIII The Canon EOS-1D X MARK III Camera  The Canon EOS-1D X Mark III is the brand's flagship DSLR camera is constructed around a redesigned 20.1MP CMOS full-frame sensor.  The new sensor is designed to give the camera both exceptional still and motion picture capabilities that satisfy the professional image and filmmaker's criteria.   Resolution, Speed and Sensitivity The 20.1MP CMOS sensor has the highest ISO range of any Canon EOS camera at 100-102,400 with expandability options for a low of 50 and a high of 819,200 equivalent.  In Live View the Mark III will capture 20fps, even with mechanical shutter and has a continuous burst rate of 1,000 RAW or RAW+JPEG images thanks to the enhanced DIGIC X processor and the use of CFexpress 2.0 recording media. Autofocus Canon's legendary Dual Pixel autofocus is the benchmark for underwater imaging.  With the Mark III, Canon has increased the number of AF zones to 525 and adds Servo AF for moving subjects and claims their Movie Servo AF can now operate down to -6 EV during video recording. Video Recording With 12-bit 5.5K RAW 60p internal recording, the EOS-1D X Mark III has positioned itself to not just maintain but also to grow the already large following it has in the underwater filmmaker community.  While RAW may not be for everyone, the Mark III can also record DCI 4K at 60p from the full sensor width in 10-bit 4:2:2 using the H.265 HEVC codec.  The ability to shoot using the full sensor was not possible with the Mark II and returns the full field-of-view so essential in wide-angle underwater video.  There is still the option to shoot cropped DCI 4K as well (using about 75% of the camera's sensor width) , giving some extra magnification when using macro lenses or even a little more zoom for wide-angle.  Video can be captured with the cinema Canon Log OETF profile.  This profile, developed for the C300 and C500 cinema cameras allows capture of the full 12 T-stop exposure latitude of the new sensor.   Durability and Battery The EOS-1D X Mark III has a 500,000 shutter release rating with reduced black-out and mirror bounce characteristics in addition to extensive weather sealing in keeping with it's position as the flagship DSLR.  For those migrating or adding the Mark III to a workflow containing the Mark II will rejoice in the Mark III's use of the same LP-E19 battery which delivers up to 2 hours of RAW or compressed 4K recording or a CIPA rated 2,850 still images using the viewfinder or 610 shots in Live View.  This is a dramatic increase from the Mark II which was rated at 1,210 and 260 shots respectively.  This long record time gives the Mark III a distinct advantage over mirrorless systems that may record similar quality levels but offer shorter battery life. The Nauticam NA-1DXIII Underwater Housing Nauticam has been providing innovative aluminum housings since the original EOS-1D X with each evolution adapting to the ever changing role this camera plays in underwater image making.  The NA-1DXIII adds a host of video-centric enhancements as well as more refined ergonomics and control access for all shooting situations.   Video Recording While the EOS-1D X Mark III can capture incredible 5.5K 12-bit RAW internally, it can also output uncompressed DCI or UHD 4K video over HDMI at up to 30p.  For those that prefer to use a more edit-friendly codec such as ProRes or DNX, the addition of an external monitor or recorder is an option.  The NA-1DXIII features the large-bore M28 bulkhead that supports Nauticam's HDMI 2.0 cable system and supported monitors/recorders such as the Atomos Ninja V.  The system also supports the HDMI 1.4 standard for use with non-recording monitor solutions such as the SmallHD 502 Bright and comes with an M28 to M16 step-down adapter pre-installed.  See the sidebar for recommended monitor housings and necessary connection accessories. Mission Controll Regardless of where a button or control dial may lie on the camera body, Nauticam engineers obsess over making sure that access to that control on the housing be intuitively placed for ease of use to insure no shot is missed while searching for a button or dial.  The NA-1DXIII features a double-action thumb lever reachable from the right handle that actuates the AF-ON and RECORD buttons on the rear of the camera.  A recessed dual-action lever that rests between the right handle and the housing triggers ISO and the M.Fn controls.  A dual-action thumb lever on the left side is for PLAYBACK/INFO and another dual-action lever on the front left of the housing os for the customizable PV and FN controls.  Large textured control dials on the right side access the main and sub command dials and a large dial on the left side is for controlling lenses equipped with manual focus or manual zoom gears. Flash Triggering The NA-1DXIII supports flash triggering via the built-in fiber-optic bulkheads atop the housing through the use of Nauticam's Manual or TTL flash triggers.  The manual flash trigger provides high speed optical triggering of supported strobes using LEDs powered by an internal user-replaceable battery.  For TTL, the Nauticam Canon TTL Flash Trigger can be used.  The NA-1DXIII also comes with two M14 5-pin Nikonos bulkheads pre-installed along with a Canon to dual Nikonos bulkhead hot-shoe cable for electronic strobe triggering.  The M14 bulkhead is installed along with an M16 to M14 step-down adapter. Integrated Vaccum Check and Leak Detection System The Nauticam vacuum check and leak detection system is shipped with NA-1DXIII as standard equipment. Combined with an accessory vacuum valve (PN 25625 for M16 or 25624 for M14), this monitoring system provides constant updates on the water tight and safe-to-dive status of the housing. A simple color coded LED lighting system lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur. The Nauticam system is temperature compensated, eliminating false alarms caused by a change in outside temperature, or from a camera heating up on an action packed dive. Premium Professional Optics Optical performance is just as necessary as camera performance and this becomes even more critical given the challenges of filming underwater.  The Nauticam NA-1DXIII uses the same N120 Port System as the previous NA-1DXII which makes for a seamless transition for those upgrading to the Mark III.  While this system provides exceptional optical-glass and flat port solutions for a wide variety of EF-mount lenses, the real power of the EOS-1D X Mark III can be realized using Nauticam's Water Contact Optics.  This lineup of dry and wet lenses are conceived using commercial lens-design software to achieve truly unparalleled underwater image quality both for stills and video in both macro and wide-angle situations.  The WACP-1 and WACP-2 achieve ultra-wide 130º fields-of-view with reduced distortion over conventional optics while featuring ~0" minimum focus distances, zoom through capabilities and unbeatable corner sharpness at even wide-open apertures such as F5.6.  The SMC-1 and SMC-2 macro wet-optics, when used with the Canon 100mm F2.8 macro lens provide 2x and 4x magnification respectively and the SMC-1 actually provides a resulting image with increased contrast and sharpness than the 100mm lens itself can achieve in air without a magnifier.

THE CANON EOS-5D MARK IV 5D Mark IV is the embodiment of a hybrid camera system, providing compelling feature sets for still photo and video capture underwater. Never before has there been a camera that excels so well at both disciplines. Still photographers will love the 61 point autofocus system shared with 1DX Mark II for its fast acquisition and reliable tracking of moving subjects. The new 30 megapixel sensor with on chip analog-to-digital conversion offers plenty of resolution with high dynamic range capture ideal for pulling shadow and mid-tone detail out of strongly backlit images. The 5D Mark IV motion capture feature set might provide even more motivation to upgrade! Previous 5D versions were acclaimed for their faithful color representation in a wide range of underwater shooting scenarios. 5D Mark IV still has that unmatched “Canon Color”, and is now Capable of recording 4K at 30 fps with usable autofocus thanks to the Canon Dual Pixel AF system. Canon 5D Mark IV Key Specifications New 30.4MP CMOS full-frame sensor with Dual Pixel AF DCI 4K 30/24p video using Motion JPEG + 4K Frame Grab 61-point AF system with 41 cross-type sensors (center point sensitive to -3 EV) Dual Pixel AF (sensitive to -4EV) for continuous Servo AF in stills (first for a full-frame Canon camera) and video ISO 100-32000 (expandable to 102400) 7 fps continuous shooting Dual Pixel Raw (image microadjustment, bokeh shift, ghosting reduction) 150,000-pixel RGB+IR metering sensor 1.62M-dot 3.2″ full-time touchscreen Wi-Fi w/ NFC + GPS Built-in bulb timer interval timers Improved weather-sealing THE NAUTICAM NA-5DMKIV UNDERWATER HOUSING While physically extremely similar to the 5D Mark III and 5DS cameras that came before it, small dimensional changes in the Mark IV body forced a new housing design. The core control layout, proven by generations of existing housings in the field, is retained here. This design consistency results in immediate familiarity with the control layout for people that have used Nauticam housings before, and a thoroughly refined and field tested design for newcomers to the brand. The new Nauticam NA-5DMIV housing incorporates technology from the Nauticam housings that came before it, but features enhanced ergonomics, more and better control access, and reduced size/weight thanks to cutting edge manufacturing processes. SYSTEM SPECIFICATIONS: Flash Triggering Dual Nikonos Bulkheads Pre-Installed Replacement O-Ring 90134 Vacuum System Pre-installed FLASH FIRING The NA-5DMKIV Housing comes standard with twin Nikonos flash connectors for electrical strobe triggering. An optional LED flash trigger is available for rapid fire optical triggering (manual power), and a new TTL Flash Trigger enables automatic flash exposure with compatible strobes. The Nauticam TTL Flash Trigger is an ideal accessory for the still photographer. This hotshoe mounted optical flash trigger provides automatic TTL Flash when used with Inon S-TTL and Sea & Sea DS-TTL Strobes connected by fiber optic cables. The TTL trigger also offers manual triggering, including rear curtain sync, with any compatible slave strobe. Accurate automatic TTL flash exposure has been a favorite feature of Nauticam photographers using cameras with pop up flashes, and the TTL Trigger unlocks this feature set in the NA-5DMKIV Housing. Powered by a single Canon NB-13L rechargeable battery, the TTL Trigger provides approximately 150 full power flashes. New in NA-5DMKIV, a window allows the flash trigger status LED to be clearly viewed, and the housing features a power button. This LED provides important status info, and the power button allows the trigger to be activated underwater. Optical TTL Strobe Compatibility: Inon S-2000, D-2000, and Z-240 Sea & Sea YS-D1, YS-D2, and YS-01 EASE OF USE No competing system is easier to assemble or break down. The camera drops into the housing with a quick release camera tray. No controls need to be preset, as housing functions for dials and switches align automatically (on/off, af-m, still photo/video). The large 120mm housing port opening allows even the largest popular pro Canon wide angle lens (11-24mm f/4) to be used, and the camera can even be mounted in the housing with this large lens attached. VIEWFINDERS The standard optical glass viewfinder is very good and travel friendly, but many photographers prefer the ease of a magnified viewfinder with adjustable diopter. Nauticam produces a “straight” 180º enlarging viewfinder and a 45º angled enlarging viewfinder to enhance the ease of close quarters work often associated with macro shooting. Both viewfinders have high quality optics, and allow bright viewing of the entire image. A patented external dioptric adjustment allows personal adjustment to a sharp-as-a-tack standard underwater and viewfinder changes can be executed in less than 30 seconds without using tools. Exceptional composition and focus accuracy have never been more accessible. PREMIUM PROFESSIONAL OPTICS Experienced shooters know a camera is only as good as the lens in front of it, and the same is true when choosing optics for an underwater camera system. Four optically coated glass dome ports (250mm, 230mm, 180mm, and 140mm diameters) and a series of acrylic ports support popular lenses from Canon, Sigma, and Tokina. Port configurations are extensively tested at Nauticam to determine the ideal extension ring length for best performance. For macro and super macro shooting, the Nauticam Super Macro Converter is a revolutionary accessory. This is an entirely in-house design, optimized for use in water. The water contact correction offers the highest overall sharpness, free from chromatic aberration and purple fringing, with reproduction ratios exceeding 2:1 when used with a EF 100mm f/2.8L IS USM Macro Lens. INTEGRATED VACUUM CHECK AND LEAK DETECTION SYSTEM The Nauticam vacuum check and leak detection system is shipped with NA-5DMKIV as standard equipment. Combined with an accessory vacuum valve (PN 25625), this monitoring system provides constant updates on the water tight and safe-to-dive status of the housing. A simple color coded LED lighting system lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur. The Nauticam system is temperature compensated, eliminating false alarms caused by a change in outside temperature, or from a camera heating up on an action packed dive.

THE CANON EOS R3 CAMERA The Canon EOS R3 in all respects appears to be the mirrorless sibling of the 1DX Mark III DSLR, clearly aimed at fulfilling many of the same roles while offering some additional capabilities through the use of the electronic viewfinder and the larger RF lens mount.  The full-frame 24.1MP Stacked CMOS sensor, in addition to having incredible low-light performance, can also capture full-width 6K video in both Raw and compressed formats at up to 60fps.  The R3 is paired to Canon's industry leading Dual Pixel AF system with 100% frame coverage and the now revived Eye AF system. DUAL PIXEL AF II Canon's Dual Pixel autofocus system has long been a favorite of underwater users, especially when it comes to tacking subjects.  With the R3, the system adds an additional 'Animal' recognition mode which might make the system even more reliable at following moving subjects.  Frame coverage is 100% with 1053 zones to ensure accurate focus wherever the subject may be. LOW LIGHT PERFORMANCE The ability to increase a camera's ISO with little penalty is of critical importance to underwater shooters for both stills and video as shooting with higher F-stop values delivers sharper corners and higher shutter speeds mean less motion blur.  The higher video frame rates also benefit by allowing the shooter to maintain a 180º shutter while still maintaining adequate aperture values.  When using color correction filters, which can often remove more than a full stop of light, compensation via ISO is not as much of an issue for overall image quality.  Maintaining dynamic range, even at high ISO levels is also important for those shooting still images using natural light or in poor water conditions. ENHANCED CONTROLS The R3 features an additional control wheel located at the upper right rear of the camera which doubles as the mode control.  This wheel can be assigned a variety of functions such as ISO and is adjusted by a dedicated control wheel on the housing within easy reach of the right handle.   VIDEO CAPABILITIES The Canon R3 can capture 6K video at up to 60fps in either Raw or more compressed formats.  The 6K capture uses the full sensor width which means no loss in field-of-view.  12-bit 6K capture is possible in both uncompressed Canon Raw or compressed Raw light formats.  10-bit H.265 is also possible in both the HDR PQ and Canon Log3 gamma curves to maximize dynamic range for post processing while maintaining smaller file sizes than a Raw format.  It's also possible (when using supported cards) to simultaneously record 10-bit 4:2:2 DCI 4K 60p video.  For those looking for higher frame rates, 10-bit 4:2:2 compressed 4K/120fps can also be captured, downsampled from the full sensor width.  A natively sampled 4K S35 crop is also an option, allowing for more magnification or the use of APS-C lenses.  The R3 also outputs a clean 6K signal over HDMI via an HDMI Micro Type D connector.  Direct custom white balance in live view is also now possible, making a critical function for underwater video even easier. STABILIZATION The R3 features 5-axis In Body Image Stabilization (IBIS) which can offer up to 8 stops of correction allowing for even smoother video and less camera movement related blur. LARGE ELECTRONIC VIEWFINDER The R3's EVF is an OLED 5.76M-dot that features an OVF simulation mode which leverages. the large dynamic range of the OLED screen to reproduce a scene the way it would look through an optical viewfinder.  The lower dynamic range of electronic viewfinders has always made them more difficult to use underwater, especially in high contrast or backlit scenes. This function can easily be switched on and off by assigning it to a custom function button.  When using the Electronic Shutter, which has an X-Sync speed of 1/180sec, the EVF delivers true no-blackout shooting up to 30fps.   Example setup THE NAUTICAM NA-R3 UNDERWATER HOUSING The Nauticam NA-R3 professional aluminum underwater housing for the Canon EOS R3 mirrorless full frame camera is a tru hybrid shooting solution, just as the R3 itself.  Nauticam has continuously supported both the Canon pro-level DSLR lineup as well as the growing full-frame RF-mount mirrorless cameras with innovative underwater housings and the new NA-R3 is the combination of all those technologies.  Blending elements of our 1D series housings with those for the R series, the NA-R3 will be the most capable housing for the R3 available. MISSION CONTROL Nauticam engineers design each housing to insure that controls are placed where they are needed most and within easy reach of a natural hand position.  The NA-R3 features large knurled control dials for the main and sub-command dials as well as an additional shoulder dial for the customizable control wheel of the R3.  A fourth control wheel, near the front of the left handle can articulate the ring of the optional EF-to-RF lens adapter when using EF lenses.  There is a dual thumb lever on the right side for Record and AF-ON as well as single levers for M-Fn and Fn2.  A lever on the left side actuates the Pv control which can change between exposure preview and OVF simulation modes on the EVF.  An additional dual thumb lever on the left side is for Playback and Magnification. HDMI 2.0 AND MOUNTING POINTS The R3 can output clean 6K 60p over HDMI and the NA-R3 features a large bore M24 bulkhead to support an HDMI 2.0 connection to an external monitor or recorder.  Mounting the monitor or recorder or other accessories is even easier with 3x 1/4"-20 mounting holes as well as an additional M10 mounting point atop the housing.  Check the resources sidebar for supported monitor/recorder housings and recommended accessories. FLASH TRIGGERING Flash triggering can be accomplished via the two included M14 electronic bulkheads (One is pre-installed in the M24 bulkhead via a removable M26-M14 adapter).  If using fiber-optic triggering, the built-in fiber optic bulkheads can be used with either the optional manual LED or TTL-flash triggers to provide the desired type of strobe power control. PREMIUM PROFESSIONAL OPTICS The NA-R3 is built around the N120 Canon RF-mount Port System which supports a wide array of Canon RF mount lenses with a selection of optical glass and acrylic ports.  With lens-removal controls for both EF and RF mount lenses, the NA-R3 can support both lens mount types without modification to the housing.  The EF-RF lens adapter is accommodated inside the housing which allows for the use of the N120 Canon EF-mount Port System without any additional extension rings.  When switching between an EF and RF lens, the camera must be removed to install or remove the adapter.  The Nauticam lineup of Premium Professional Optics can deliver unparalleled optical quality and expanded creative options. When used with the Canon RF 14-35 F/4 IL USM lens, the WACP-2 creates a stunning 140º field-of-view while maintaining an incredibly natural looking image and excellent corner sharpness.  The SMC-1 delivers 2.3x macro magnification to the RF 100mm macro lens while the SMC-2 delivers 3.3x. VACUUM CHECK AND LEAK DETECTION SYSTEM The housing comes with electronics pre-installed for Nauticam's Vacuum Check and Leak Detection system, requiring only the optional M16 Vacuum Valve (25625). This monitoring system provides constant updates on the water tight and safe-to-dive status of the housing. A simple color coded LED lighting system lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur. The Nauticam system is temperature compensated, eliminating false alarms caused by a change in outside temperature, or from a camera heating up on an action packed dive.

Der NA-1DX stellt die Bedienelemente, die wichtig sind, dorthin, wo sie leicht zu bedienen sind - keine unangenehmen Zugänge sind für alle wichtigen Bedienelemente erforderlich. Das Greifen der bekannten gummierten Griffe ist erst der Anfang der Verbindung, die sich zwischen Fotograf und Gehäuse entwickelt. Ohne den Griff loszulassen, aktiviert der rechte Zeigefinger einfach den patentierten zweistufigen Auslöser von Nauticam. Sowohl die obere als auch die hintere Bedienskala befinden sich einzigartig an der Seite des Gehäuses - leicht zugänglich, ohne die Hand von den Griffen zu nehmen. Der rechte Daumen kann schnell eine neue Doppelpaddelhebelanordnung aktivieren, die die Aufnahmefunktion oben und die AF-ON-Funktion am unteren Hebel aktiviert. Die ISO-Steuerung entlehnt dem brillanten NA-5DMKIII-Gehäuse mit einem Hebel, der mit dem Daumen an der rechten Hand leicht erreichbar ist - wiederum ohne die Hand vom Griff zu nehmen. Diese kritische Entwicklung verbessert die Videofähigkeit erheblich, da die ISO-Variation für die Videobelichtungssteuerung unerlässlich ist. Zweistufiger Auslöser Natürlich sind die wichtigsten Bedienelemente abgedeckt - präzise platzierter zweistufiger Auslöser: prüfen. Befehlswahlschalter direkt auf Knopfdruck: prüfen. AF-ON befindet sich dort, wo es leicht aktiviert werden kann, ohne den Finger vom Verschluss zu nehmen: überprüfen. ISO verfügbar, ohne die Hand zu bewegen: überprüfen. Aber Nauticam hört nicht nur mit den primären Kontrollen auf. Jede Kontrolle wird sorgfältig geprüft. So werden beispielsweise die AF-Punktwahl und die wichtige programmierbare Taste "*" nach oben und rechts verschoben, um sie mit dem rechten Daumen leichter erreichbar zu machen. Mit den Tasten Quick Mode und Set erhalten Sie die legendären Klaviertasten von Nauticam. Das Menü ist mit der linken Hand leicht erreichbar, mit Info und Wiedergabe auf einem Doppelpaddel (ähnlich den Paddles auf der rechten Seite), so dass die Bildbetrachtung, einschließlich Histogramm, verfügbar ist, ohne die linke Hand vom Griff zu nehmen. Die Kamera verfügt über einen Joystick, den einige andere Hersteller ignorieren könnten, da es schwierig ist, eine Steuerung dafür zu entwickeln. Die Designer von Nauticam beherrschten nicht nur diese Steuerung, sondern konnten ihre komplexe Funktionalität sogar näher an die rechte Hand heranführen, um sie für den Unterwasserfotografen nutzbar zu machen. Dieser Joystick wird zum Schwenken während der Wiedergabe benötigt, und die Fünf-Tasten-Lösung des NA-1DX für die Steuerung ermöglicht das Überprüfen von Details mit Schwenken nicht nur, sondern auch ganz einfach. Alle diese ergonomischen Verfeinerungen verfolgen ein Ziel: das ergonomischste Unterwasser-Bildgebungssystem, das möglich ist. Die Nauticam NA-1DX ermöglicht es dem Bediener der Kamera, mit den Händen an den Griffen und dem Blick auf den Sucher oder den externen Videomonitor auf alle wichtigen Kamerasteuerungen zuzugreifen. Nauticam hat auch erhebliche Anstrengungen in Funktionen unternommen, die ein einfacheres Laden der Kamera ermöglichen. Keine Kontrollen erfordern eine Voreinstellung vor dem Einbau einer Kamera in das Gehäuse, wodurch die Möglichkeit von vergeudeten Tauchgängen aufgrund einer falschen Kamerainstallation ausgeschlossen ist. Professionelle Qualität bedeutet, bereit zu sein, wenn Sie es sind. Benutzerfreundlichkeit Kein System ist einfacher zu montieren oder zu zerlegen. Die Kamera hält mit einem Schnellverschluss in das Gehäuse. Es müssen keine Bedienelemente voreingestellt werden, da sich die Gehäusefunktionen für Drehregler und Schalter automatisch ausrichten (ein/aus, AF-M, Standfoto/Video). Die große 120-mm-Gehäuseöffnung ermöglicht den Einsatz auch des größten gängigen Canon-Weitwinkelobjektivs (11-24mm f/4), und die Kamera kann sogar mit diesem großen Objektiv im Gehäuse montiert werden. Sucher Der standardmäßige optische Sucher ist sehr gut und reisefreundlich, aber viele Fotografen bevorzugen die Einfachheit eines vergrößerten Suchers mit einstellbarem Dioptrien. Nauticam produziert einen "geraden" vergrößernden Sucher und einen um 45º abgewinkelten vergrößernden Sucher, um die Arbeit auf engstem Raum zu erleichtern, die häufig mit Makroaufnahmen verbunden ist. Beide Sucher verfügen über eine hochwertige Optik und ermöglichen eine helle Betrachtung des gesamten Bildes. Eine patentierte externe Dioptrienverstellung ermöglicht die persönliche Anpassung an ein scharfes Bild.

THE CANON EOS R5 CAMERA The Canon EOS R5 is the latest in Canon's full-frame mirrorless camera lineup which has gained unprecedented demand.  It features the RF lens mount which has the same large 54mm diameter but the ability to have larger rear lens elements that are closer to the sensor gives increased corner and outer edge sharpness.  The R5 uses an all new 45MP CMOS sensor with in-body image stabilization which can reduce shake by up to 8 stops.  The camera's Dual Pixel autofocus system uses 1053 autofocus points across the entire frame.   It is also capable of recording 8K video at 24p or 30p and 4K at up to 120p.   The EOS R5 can also use the large EF-mount lens lineup via three optional adapters, a simple EF to R adapter, one which supports the customizable control ring and another that features a drop-in filter mount. Key Camera Specifications 45MP full-frame Dual Pixel CMOS sensor 8K Video, with option for RAW or 10-bit 4:2:2 C-log or HDR PQ Up to 4K/120p, or oversampled 4K up to 30p 100% coverage Dual Pixel II AF system 12 fps / 20 fps burst (mechanical / electronic shutter) 5.76M-dot OLED EVF with 120fps max refresh rate 3.2" 2.1M-dot fully articulating touchscreen 10-bit HDR photos in HEIF format 1x CFExpress slot, 1x UHS-II SD slot Weather sealing   THE NAUTICAM NA-R5 UNDERWATER HOUSING FOR THE CANON EOS R CAMERA The NA-R5 underwater housing follows suit with Nauticam's drive for innovation. Both the Canon EOS R5 and EOS R present shooters with the ability to use both the available legacy EF lenses via an adapter in addition to their native RF optics.  To support both the legacy and native lenses, Nauticam has integrated the NA-R5 into the N120 port system. Canon's EF to RF mount adapters can be affixed to the camera before insertion into the housing. When using the EOS R5 inside the housing with the adapter and a supported EF lens, the port and extension ring arrangement will be identical to the same setup on a Nauticam Canon N120 DSLR. As the RF lens lineup emerges, dedicated port and extension ring combinations will be listed on the Port Chart. Two lens release buttons, one for RF and one for EF lenses used with the optional Canon adapter, are located on the front of the housing to make lens removal through the port opening simple. Mission Control Nauticam engineers are obsessed with getting the underwater image maker unfettered access to all the necessary controls, with as many within easy reach of the ergonomic rubberized handles. This Mission Control philosophy extends to the NA-R5 where a dual thumb lever and dual sub-lever are placed by the right handle. The upper thumb lever activates the "AF-On" and the lower the "Q" buttons while the sub-lever corresponds to the "M-Fn" and "Record" buttons. Near the left handle is a thumb lever for "Playback" as well as a dedicated switch to change from using LCD to the EVF. Large knurled and rubberized control dials access the camera's "main" and "sub" command dials. The two-stage trigger allows for smooth focus and firing activation. Additional buttons for "Menu", "Focus Point Selection" and others are also easily reached from the handles. An additional control wheel is located on the left side of the housing and will interface with the control ring on the supported EF to EOS R Mount Adapter with Control Ring using the optional gear (NA19561). Flash Triggering Flash triggering is achieved via one of two optional Flash Triggers, a manual LED trigger (NA26301) or a TTL Flash Trigger (NA26321) that use the built-in fiber optic bulkheads with optional fiber-optic cables to trigger supported strobes. For controlling strobes that do not support fiber optic flash triggering, a variety of legacy hot-shoe flash control bulkheads are available. Integrated vacuum check and leak detection system The Nauticam vacuum check and leak detection electronics are shipped with the NA-R5 as standard equipment. Combined with an accessory vacuum valve this monitoring system provides constant updates on the water tight and safe-to-dive status of the housing. A simple color coded LED lighting system lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur. The Nauticam system is temperature compensated, eliminating false alarms caused by a change in outside temperature, or from a camera heating up on an action packed dive.