Canon EOS R5II Underwater Housing by Nauticam

Photos may show accessories not included in your order. Only the content of the tab "Scope of delivery" is relevant.

on stock

€5,090.00*

Prices incl. VAT plus shipping costs

1 in stock

Free shipping

Delivery time: 1-3 working days*

M16 Vacuum Valve II

€205.00*

Hand Strap for handles

€45.00*

Full Frame Angle Viewinder 40°/ 0.8:1

€1,720.00*

Cooling Fan Set for NA-R5II Housing

€590.00*

Product number: NA17341

HAN: NA-R5II

Available stock: 1

The Canon EOS R5 Mark II camera

The Canon EOS R5II is the next iteration of the widely popular Canon EOS R5 and retains many of the features that were attractive to underwater image makers. Firstly, and most excitingly video shooters now have access to 8K 60 Raw/4K 60 SRAW/4K 120 10-bit Video. The Canon EOS R5II retains its 45MP full-frame mirrorless sensor that utilizes Canon's new RF lens mount and also has next-generation Dual Pixel autofocus.

The most important technical data of the camera

45MP Full-Frame Stacked BSI CMOS Sensor
DIGIC Accelerator Processing
Dual Pixel Intelligent AF, Eye Control
8K 60 Raw/4K 60 SRAW/4K 120 10-Bit Video
Up to 30 fps, Pre-Continuous Shoot Mode
5.76m-Dot EVF with OVF Sim. View Assist
3.2" Vari-Angle Touchscreen LCD
In-Camera Upscaling to 179MP
CFexpress & SD UHS-II Memory Card Slots
Wi-Fi 6E/Wi-Fi 6 Support

The Nauticam NA-R5II underwater housing for the Canon EOS R5 II

The NA-R5II underwater housing follows Nauticam's drive for innovation.

Mission control

The engineers at Nauticam are obsessed with providing the underwater photographer with unhindered access to all the necessary controls, as many of which as possible are within reach of the ergonomic, rubberised handles. This Mission Control philosophy also applies to the NA-R5II, which has a double thumb lever and a double lower lever on the right handle. The upper thumb lever activates the "AF-On" buttons and the lower one the "Q" buttons, while the lower lever corresponds to the "M-Fn" and "Record" buttons. Near the left handle is a thumb lever for "Playback" and a special switch to switch from using the LCD to the EVF.

Large and rubberised control dials allow access to the camera's main and secondary control dials. The two-stage shutter release enables smooth focussing and release. Additional buttons for "menu", "focus point selection" and others are also easily accessible from the grips.

An additional control wheel is located on the left side of the housing and can be connected to the control ring of the supported EF to EOS R mount adapter with control ring via the optional gearbox (NA19561).

Integrated vacuum test and leak detection system

The Nauticam vacuum control and leak detection electronics are part of the standard equipment of the NA-R5. In combination with an optional vacuum valve, this monitoring system constantly provides up-to-date information on the watertight and submersible condition of the housing. A simple, colour-coded LED light system indicates to the user that the vacuum is stable or that the housing is losing vacuum. Leak detection is integrated into the same circuit so that an audible and visual signal is emitted in the event of water ingress.

The Nauticam system is temperature compensated, eliminating false alarms due to changes in external temperature or heating of the camera during an action-packed dive.

Technical data

Dimensions: 357mm(W)x 200mm(H) x 167mm(D)

Depth Rating: 100m

Weight in air: 3.64kg

Weight in water: Positive 0.1kg (includes camera and battery)

Port Opening: N120

Scope of delivery

Canon EOS R5II Underwater Housing by Nauticam

Spare main o-ring, lubricant and removal tool

2x Optical bulkhead caps

2x Handles with mounting balls

Set of allen keys

CR2032 battery for leak detector

Padded housing bag and shoulder strap

Only the components of the item that are listed here will be delivered. Accessories and/or decoration shown in our images are for demonstration purposes only. In particular, we would like to point out that the purchase of an underwater housing does not include a camera and often not a port nor an external viewfinder. If you have any questions about the configuration of your system, do not hesitate to contact us.

Manuals

NA17333_Canon EOS R5 Product Unterwassergehäuse Bedienungsanleitung von Nauticam-en.pdf

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Be the first to share your insights.

Please enter a valid email address.

Your question *

Please enter a valid question.

I agree that my data will be processed to answer the question. I have taken note of the Privacy Policy and agree to the information described therein.*

Fields marked with * are mandatory.

There aren't any asked questions yet.

USB-C

on stock

USB-C Bulkhead with USB-C Connector

Nauticam USB-C Bulkhead with USB-C Connector

€165.00*

on stock

M24-M16 Adapter for USB-C Bulkhead

M24 - M16 adapter for use with USB-C Bulkhead with USB-C Connector (NA26325)

€58.00*

M16 Vacuum Valve II

Installing vacuum valve to housing Remove the plug of the M16 accessory port from the housing. Remove the cap from the vacuum valve. Tighten the vacuum valve to the housing with the tool provided. Building up vacuum Remove the cap of the vacuum valve. Connect the hand pump to the valve and pump several times until it reaches the target vacuum level. The LED light will turn flashing yellow while vacuum is building up, then steady green when the target vacuum level is reached. Attention: After the target vacuum is reached, i.e. steady green light, attach the cap back to the vacuum valve. It is recommended to leave the housing for at least 20mins to ensure it is sealed. If the LED light changes from steady green light to rapidly flashing yellow light, that means there is a leakage and please check every O-ring and conduct the vacuum test again. Please ensure that the cap is attached back to the vacuum valve before going underwater. Vacuum can be released by pushing the red release button. Attention: Please DO NOT attempt to go over the designated vacuum level, i.e. stop pumping when the LED turn green. Excessive vacuum level may lead to the malfunction of the camera and lens. Note: Although the vacuum indicator is designated to compensate for a certain amount of temperature variation, it is recommended to conduct the vacuum test in an environment where the temperature is stable. After set up, the meaning of the LED indicator in the housing: Flashing “Blue” light: Standby mode. The moisture alarm is active, and the system is ready for vacuum indication whenever a vacuum is detected. Flashing “Red” light with beeping sound:Moisture is detected. Flashing “Yellow” light: Some vacuum is detected, target vacuum level is not reached. Steady “Green” light: Target vacuum level is reached. Rapidly flashing “Yellow” light: Vacuum is dropping. (Will occur only after target vacuum level is reached) Rapidly flashing “Red” light: Vacuum is totally lost. Circuit stalled until switched off. (Will occur only after target vacuum level is reached)

€205.00*

Hand Strap for handles

This hand strap is attached to handle 28113, which fits the following housings with the standard handles .

€45.00*

Full Frame Angle Viewinder 40°/ 0.8:1

The next generation Nauticam Full Frame Angle Viewfinder is the perfect addition to housings for cameras with the latest generation of larger Electronic Viewfinders such as the Sony A1 and A7SII as it provides a bright, clear and undistorted image of the camera’s viewfinder with it's 0.8:1 magnification. This enhanced viewfinder is essential for precise focusing and artistic composition. This viewfinder is also available in a 1:1 version that can also accommodate viewing of the entire image field on cameras with standard EVFs such as most DSLR and Mirrorless cameras. The Full Frame Angle Viewfinder also provides more clearance for your regulator allowing for more a more comfortable viewing position, installs in seconds without tools and retains the hassle-free underwater dioptric adjustment feature. The viewfinder can also be rotated when using the camera in a portrait orientation. INTRODUCING NAUTICAM FULL FRAME ANGLE VIEWFINDER 40°/ 0.8:1 For over a decade, Nauticam’s Enhanced Viewfinders have been known for superior optics, tack sharp performance and first-of-its-kind underwater dioptric adjustment. Anyone who has used these instruments has grown to appreciate what an asset they can be to any underwater photographer. But the camera world has seen radical changes in technology in the last ten years, including ever increasing size and resolution of Electronic Viewfinders (EVFs) found in the latest high-end mirrorless cameras. These newer EVFs challenge even the finest enhanced viewfinders for underwater housings. In response to this technological evolution, Nauticam is excited to introduce the next generation of Enhanced Viewfinders designed to meet and exceed the requirements of all the current digital camera EVFs, as well as what is expected in the near future. The new Full Frame Angle Viewfinder employs entirely new optics to allow distortion free viewing without clipping the image frame. With the new viewfinders, reviewing images in playback or navigating the menus through the EVF has never been so easy. 32º/1:1 VS. 42º/0.8:1 Because different photographers have different needs and priorities, Nauticam offers the Full Frame Angle Viewfinder in two options. The 1:1 viewfinder option offers the most magnification available for underwater viewing while preserving the image field and surrounding data on most cameras. This viewfinder is a breakthrough in performance on high resolution EVFs and is an absolute joy on traditional DSLRs. The level of detail rendered is unequaled in the industry. For those utilizing cameras with known EVF challenges such as the Sony’s A1 and A7SIII cameras, or just for the photographer who wants as much working room on the viewfinder field-of-view as possible, Nauticam offers the new 0.8:1 version. The 0.8:1 viewfinder offers an equally crisp and bright EVF display as the 1:1 viewfinder, with slightly less magnification for uncompromising corner to corner image viewing or better imaging of shooting data. HASSLE-FREE UNDERWATER DIOPTRIC ADJUSTMENT The much-loved dioptric adjustment is still featured and allows for easy eyesight adjustment in-water without disassembly of the viewfinder. as well as the simple installation and removal that takes only seconds. TOOL FREE INSTALLATION The Nauticam Full Frame Angle Viewfinder can be installed in seconds without any tools. The viewfinder is a direct replacement of the stock 0.66X viewfinder on DSLR and many full-frame mirrorless housings but requires an easily installed adapter on certain MIL housings. The viewfinder can also be rotated to allow the camera to be used in portrait orientation. Whether future proofing a viewfinder purchase for your current rig, or patiently waiting for a viewfinder worthy of the latest pro mirrorless camera you are diving, these cutting-edge viewfinders are the new industry standard to be looking at. <iframe width="560" height="315" src="https://www.youtube-nocookie.com/embed/1AeT-02Mrdo?controls=0" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" allowfullscreen></iframe>

€1,720.00*

Cooling Fan Set for NA-R5II Housing

€590.00*

Ball heads

on stock

M10 Strobe Mounting Ball for Housing

Provides an additional ball mount for housings with available M10 threaded mount. Installation Guide: Nauticam M5 & M10 Strobe Mounting Balls from Nauticam on Vimeo.

€45.00*

on stock

M5 Strobe Mounting Ball for Housing

Strobe mounting ball that attaches to M5 threaded mount on select housings. Installation Guide: Nauticam M5 & M10 Strobe Mounting Balls from Nauticam on Vimeo.

€30.00*

Monitor Housing Mounting Adaptor

This kit replaces the standard handle top plates to allow the mounting of Nauticam monitor housings to compatible Nauticam underwater housings.

€190.00*

on stock

Housing Mounting Ball with 1/4'' Screws

This standard 1" mounting ball is designed to work with housings that feature the 1/4-20 threaded mounting locations such as the NA-E2 and NA-BMPCC6K. NOTE: please confirm the housing you wish to use with this ball mount features the 1/4-20 threading before purchase.

€43.00*

HDMI 1.4

on stock

Underwater Monitor WED-7 Pro

The WED-7 Pro is a professional HD monitor specially designed for underwater photographer. The product is made of aluminum alloy, with carbon-fiber trim panels and delicate stainlesssteelchrome-plated buttons. It is High-end and professional product. The underwater monitor uses a full HD FHD display, plays for 4K HDMI input and outout,and is configuredwith a variety of auxiliary tools, so that the photographer is more freely and with ease in shooting. Professional auxiliary shooting function: The product has a variety of professional shooting functions, such as: brightness histogram, audio column, auxiliary focus, false color, exposure prompt, monochrome display, nine grid, square, etc., all can better help the photographer effectively monitor and control the picture to the process of shooting and creating works. Long back-up life: The product is powered by two 18650 lithium batteries, the longest working time can be up to 3.5 hours, and the product has a battery indicator light, so that the photographer can observe the battery power at any time. 4K signal transmission: The product supports 4K HDMI input and output, and high-definition pictures of the camera can be displayed on the monitor in real time through 4K signal transmission of HDMI. 7-inch FHD: The product features a 7-inch full HD screen with 1920x1200 resolution and 440PPI pixel density, as well as 500CD /m² high brightness and 1200:1 high contrast. Ultra-wide viewing Angle: The choice of IPS display has an ultra-wide viewing Angle of 160°, which allows the photographer to easily get a clear picture when adjusting the position. True color: The product uses the trustworthy Rec.709 high-definition color standard in the professional field, and accurately restore the color without distortion or color bias, it shows the real image. Hood: The product design has a professional hood, so that the photographer can get the ideal viewing effect when using in the outdoor bright light. Excellent image processing engine: the product is matched with an independent image processing engine, which improves the light and dark effect and contrast of the picture, so that the picture quality is more exquisite. Excellent deep waterproofing effect: UP to 80m/263ft IP68 waterproofing grade: professional waterproofing design, full process technology and quality control, as well as real simulation of various deep water conditions of pressure testing.

€1,568.00*

on stock

WED-5 Underwater Monitor

5-inch HD Underwater Monitor by Weefine A lightweight made of aluminium that is travel-friendly and practical. This is how the WED-5 underwater monitor from Weefine presents itself. With a brightness of just under 500 nits and 16.7 million colours, it allows you to fully assess your shots even in the water. The monitor housing is milled from aluminium in the highest precision and then protected with a solid surface anodisation. This makes the monitor resistant to salt water and overheating.

€998.00*

on stock

HDMI (D-A) Cable (200mm0

This 200 mm HDMI cable is used for internal connection between the HDMI housing connector and the HDMI camera output.

€125.00*

Flash Trigger

on stock

TTL Converter for Canon in Naurticam and Hugyfot housings

Optoelectronic flash trigger for Canon cameras in Nauticam and Hugyfot housings. The world's first TTL converter that is compatible with all Canon DSLR and DSLM cameras, regardless of model or TTL protocol version. Compatible underwater flashes: Inon Z330, Z240; Ikelite DS-161, DS-160; Sea&Sea YS-D1, YS-D2 (made-in-China), YS-250, RetraFlash PRO and Prime (including HSS support). The product supports 4 pcs TTL outputs: 2 pcs optical bulkheads + 2 pcs electrical bulkheads can be connected. TTL converter has automatic on/off, incredible battery life 5 years. Easy installation by the user. TTL and HSS on RetraFlash Fantastic TTL accuracy allows photographers to relax and rely completely on automatic flash exposure control. Many creative tasks are made possible by using extremely fast HSS shutter speeds of up to 1/8000 with the Retra Pro flash in manual mode. The TTL converter firmware also has some other important updates related to its common functionality. The Retra PRO profile can be set by the user üvia the TTL converter's built-in rotary switch. The TTL/M modes can be switched underwater simply by using the camera name or the flash button. In manual mode, the flash intensity can be adjusted manually üvia the camera wheel/scale, but also üvia the flash control knob. (+/-) TTL flash compensation is supported by the firmware, the full range is available via the camera control in the range -3ev......+3ev. The firmware supports sync settings for the 1-st /2-nd curtain and the rear curtain. Continuous (serial) recording is supported. The HSS firmware of the TTL converter supports the HSS functionality of the Retra Pro flash. The built-in rotary switch must be set to the Retra Pro profile (position - "7"). Available HSS shutter speeds for Sony A7-A9: 1/320 ....1/8000 sec. The Retra flash allows the HSS flash intensity to be set using the rotary knob. In the updated firmware, switching to HSS shutter speeds is also included in the general functionality of the TTL converter (also for all other positions of the rotary switch), - usable for shooting with ambient light at high shutter speeds if required. However, the X-Sync speed limit (1/250 for Sony A7-A9) is still automatically supported for TTL modes, as required for mono flash TTL underwater flash. Incredibly long battery life in the TTL converter: 1-3 years of continuous operation. The product has extremely low power consumption. The converter features an automatic on/off switching module that saves battery power. No mechanical switch is required to switch UW Technics TTL converters on and off. The TTL converter firmware includes TTL profiles for the following underwater flashes: Retra Pro, Inon Z-330/ Z-240/S-2000, Sea&Sea YS-D2/ YS-D1/ YS-250, Ikelite DS-161/ DS-160 and Subtronic Pro-270/Pro-160. Each profile can be easily set by the user üvia an onboard switch.

€589.00*

Manual Flash trigger for Canon

Flash emitters enable fast shooting sequences, perfect for fast motion sequences. Since the pop-up flash is not used, the camera doesn't have to wait for the pop-up flash to recycle, which means faster shooting, less heat buildup, and longer camera battery life. Shoot as fast as your external flashes can. This flash output is manual only; automatic flash exposure (TTL) is not currently possible. Supported flashes include all RetraFlashes, the Inon Z-240 Type 4, D-2000 Type 4, S-2000, Sea&Sea YS-250*, YS-01, and YS-D1. Photographing with fiber optic cables means shooting safely. There are no sync cords to get damaged in floods or corrosion, which means much higher reliability, and the flash can even be removed from the rig while underwater to allow for off-camera lighting. The flash can even be removed from the rig while underwater to allow for off-camera lighting. The flash output for Canon weighs less than 70 grams, including batteries, and attaches to the hot shoe of the camera, which is fixed with a locking lever. It uses 2x CR3032 batteries, which in combination with the highly efficient LED trigger lights provide thousands of flashes (10000 estimated). An LED status indicator informs the user üabout the functionality of the device. It fits perfectly into the supported housings listed below. New housings for Canon SLR cameras also support flash Output. SUPPORTED HOUSINGS: NA-R5 NA-R5C NA-R3 NA-5DMKIII NA-1DX NA-6D NA-7DMKII NA-5DSR NA-1DXII NA-5DIV * 2013 model YS-250 strobes have been tested and function properly. Earlier models may have less sensitive slave sensors and be incompatible. * Nauticam Flash Trigger is not compatible with Sea&Sea YS-D2 strobe.

€290.00*

TTL Flash Trigger for Canon

The optical flash trigger is mounted on the hot shoe in the housing and triggers the flashes via fibre optic cable. Automatic TTL flash is possible with Sea&Sea DS-TTL or Inon S-TTL flashes. The TTL trigger also offers manual and rear curtain synchronisation. Battery and charger are not included. Uses the common Canon NB-13L battery. Charge the NB-13L with the Canon CB-2LH charger.

€640.00*

on stock

Adapter for fibre-optic cable to Nauticam

Adapter for connecting fibre optic cables with plugs (Sea&Sea standard) to Nauticam underwater housings.

€6.50*

TTL Flash Trigger for Canon II

Nauticam TTL Flash Trigger Compatible Cameras Canon EOS R3 Canon EOS R5 Canon EOS R6 Canon EOS 5D Mark IV Installation Guide: Nauticam 26322 TTL Flash Trigger from Nauticam on Vimeo.

Spare parts

on stock

M16 plug for housing (with o-ring)

To cover an M16 socket on an underwater housing from Nauticam.

€23.00*

Housing o-ring 90121

Spare O-ring for the following Nauticam housings: NA-5DIII NA-645DF NA-6D NA-70D NA-D300 NA-D300S NA-D700 NA-D800 NA-D81 NA-D600 NA-H4D NA-R6

€25.00*

Housing cap (N120)

Protect the housing's port sealing surface and prevent dust infiltration into the housing when not in use with this Housing Cap that also has a bayonet ring allowing it to be locked in place as a port would.

€58.00*

HDMI 2.0

Atomos Ninja V(+)/Ultra Underwater housing by Nauticam

With more cameras offering high quality HDMI video output, the Atomos Ninja V steps in, not only as a stunning monitor but also as a recorder of 4K 60p 4:2:2 10-bit video to on-board SSD drives in edit-friendly ProRes or Avid formats. The Nauticam NA-Ninja V, when used with supported housings and cameras, allows for the connection of the Ninja V over HDMI 2.0 in addition to providing easy access to the Ninja V controls underwater. Atomos Ninja V The Atomos Ninja V is an exceptional monitor, featuring a bright 1000 nit 10-bit HDR 5.2" screen that can display over 10 stops of dynamic range with compatible cameras. The monitor includes a variety of exposure and focus assist tools to insure your footage is properly exposed with critical focus. In addition to being an extremely capable monitor, the Ninja V is also a recorder. When used with compatible cameras over HDMI 2.0, the Ninja V can record 4K at 60p in 10-bit 4:2:2 ProRes or DNxHR formats to Atomos AtomX SSDmini solid state drives. With a 1TB SSDmini drive, the Ninja V can record up to 150 minutes of 4K video. EXPOSURE TOOLS The Ninja V exposure guides include a Waveform for luminance, RGB Parade for color balance, and Vector Scope for hue and saturation. These tools, especially useful for the underwater filmmaker, allow accurate and fast judging of exposure, even in the most uncooperative lighting scenarios. Even when recording Log or HDR footage, using Rec.709 or HLG monitoring displays the video on the screen adjusted to the levels of the chosen standard.. FOCUS TOOLS Critical focus can be achieved using various peaking tools. Focus Peaking Color displays the original color image with the sharpest areas outlined in a selectable color. Focus Peaking Mono provides the same overlay but on a monochrome image. Focus Assist Outline shows only the false color outline on a black background of the sharpest Areas. THE NAUTICAM NA-NINJA V UNDERWATER HOUSING The Nauticam NA-Ninja V builds on the strong foundation Nauticam has built with previous Atomos monitor/recorder housings but is built around the new M28 large-bore bulkhead that supports HDMI 2.0. The Ninja V is easily mounted in the housing, dropping in without trays or other mounting accessories and is held in place by two rotating locking levers. The Ninja V features both an HDMI 2.0 input as well as an output and the NA-Ninja V supports both as well. With dual M28 bulkheads, a second HDMI cable can be run to another monitor. The Ninja V allows for the application of. cube format 3D LUTs to this output signal. The NA-Ninja V supports up to the NP-F970 size battery which provides up to two hours of run time. A CR-2032 battery powers the vacuum check and leak detection system. When used with the included Vacuum Valve, the system gives real-time feedback about the watertight integrity of the housing through an easily visible multi-color LED on the top of the housing. Access to the touchscreen controls of the Ninja V are handled via a series of buttons and a selector knob beneath the screen of the housing including PLAY, REC, MON, RGB, PEAK and the Muti-Selector Lever.

€2,435.00*

M24 Adaptor for HDMI 2.0 Cable (to use with 25087 with NA-A7RIV+SIII)

€65.00*

Atomos Ninja V(+)/Ultra (SDI) Underwater Housing by Nauticam

This version is suitable to accommodate the Atomos AtomX SDI module. With more cameras offering high quality HDMI video output, the Atomos Ninja V steps in, not only as a stunning monitor but also as a recorder of 4K 60p 4:2:2 10-bit video to on-board SSD drives in edit-friendly ProRes or Avid formats. The Nauticam NA-Ninja V, when used with supported housings and cameras, allows for the connection of the Ninja V over HDMI 2.0 in addition to providing easy access to the Ninja V controls underwater. Atomos Ninja V The Atomos Ninja V is an exceptional monitor, featuring a bright 1000 nit 10-bit HDR 5.2" screen that can display over 10 stops of dynamic range with compatible cameras. The monitor includes a variety of exposure and focus assist tools to insure your footage is properly exposed with critical focus. In addition to being an extremely capable monitor, the Ninja V is also a recorder. When used with compatible cameras over HDMI 2.0, the Ninja V can record 4K at 60p in 10-bit 4:2:2 ProRes or DNxHR formats to Atomos AtomX SSDmini solid state drives. With a 1TB SSDmini drive, the Ninja V can record up to 150 minutes of 4K video. EXPOSURE TOOLS The Ninja V exposure guides include a Waveform for luminance, RGB Parade for color balance, and Vector Scope for hue and saturation. These tools, especially useful for the underwater filmmaker, allow accurate and fast judging of exposure, even in the most uncooperative lighting scenarios. Even when recording Log or HDR footage, using Rec.709 or HLG monitoring displays the video on the screen adjusted to the levels of the chosen standard.. FOCUS TOOLS Critical focus can be achieved using various peaking tools. Focus Peaking Color displays the original color image with the sharpest areas outlined in a selectable color. Focus Peaking Mono provides the same overlay but on a monochrome image. Focus Assist Outline shows only the false color outline on a black background of the sharpest areas. THE NAUTICAM NA-NINJA V UNDERWATER HOUSING The Nauticam NA-Ninja V builds on the strong foundation Nauticam has built with previous Atomos monitor/recorder housings but is built around the new M28 large-bore bulkhead that supports HDMI 2.0. The Ninja V is easily mounted in the housing, dropping in without trays or other mounting accessories and is held in place by two rotating locking levers. The Ninja V features both an HDMI 2.0 input as well as an output and the NA-Ninja V supports both as well. With dual M28 bulkheads, a second HDMI cable can be run to another monitor. The Ninja V allows for the application of. cube format 3D LUTs to this output signal. The NA-Ninja V supports up to the NP-F970 size battery which provides up to two hours of run time. A CR-2032 battery powers the vacuum check and leak detection system. When used with the included Vacuum Valve, the system gives real-time feedback about the watertight integrity of the housing through an easily visible multi-color LED on the top of the housing. Access to the touchscreen controls of the Ninja V are handled via a series of buttons and a selector knob beneath the screen of the housing including PLAY, REC, MON, RGB, PEAK and the Muti-Selector Lever.

€2,710.00*

HDMI 2.0 Cable M24A2R200-M28A1R170 by Nauticam

This is the HDMI 2.0 cable necessary to use the Housings NA-alpha1, NA-GH6 und NA-A9III with the 17922 Nauticam Atomos Ninja V Housing for Atomos Ninja V 5” 4Kp60 4:2:2 10-bit Reorder/Monitor/Player. Note: this cable supports RAW 16bit 4.2K (4264 x 2408) up to 59.94p output but actual capture quality is subject to recorder capabilities.

€375.00*

Canon EOS R5II Underwater Housing by Nauticam

The Canon EOS R5 Mark II camera

The most important technical data of the camera

The Nauticam NA-R5II underwater housing for the Canon EOS R5 II

Mission control

Integrated vacuum test and leak detection system

Login

Ask a question

Previously asked questions