HDMI (D-D) Cable in 200mm Length

Sony's line of APS-C mirrorless cameras has long offered top-level specs at an economical price point along with access to an extensive line of interchangeable lenses. For the A6400, Sony has paired the high-resolution 24mp sensor from the A6300 with a new Bionz X processor that borrows technology from the flagship A9. The A6400 can also shoot 4K video downsampled from the full sensor area without the recording time limit of the A6300 and A6500. Improved autofocus and faster camera response make this Sony mirrorless a standout in the APS-C mirrorless camera field. THE SONY A6400 CAMERA Mirrorless cameras have long led the way in hybrid cameras that allow for high-quality still and video recording from a compact interchangeable lens package. The APS-C sensor of the A6400 delivers both 24.2MP still raw images at up to 11fps continuous shooting as well as oversampled 4K video from the full-sensor width recorded in high dynamic range HLG and S-log gamma curves. The A6400 is highly customizable which is made easier by the upgraded menu system. Boot-up time and overall responsiveness of the camera are also improved thanks to the new Bionz X processor. The most notable upgrade to the A6400 is found in the autofocus system. Sony's Real-time Tracking makes using tracking-based autofocus easier. With the A6500 and the A6300 the user would have to decide on subject matter beforehand, switching between Eye-AF where the camera detects and follows a human eye, face detection or simple tracking of an object. With Real-time Tracking, the object that lies in the selected area of the frame will be tracked, regardless of what it is. This is notable for the underwater user that also uses the camera for topside imagery as it eliminates having to reconfigure the autofocus for tracking underwater subjects. For the video shooters, 4K capture at up to 30p is downsampled from the full-width of the sensor (6K). Recording time restrictions have been removed and the use of HLG and S-Log gamma curves is now an option to maximize dynamic range of the footage. Key Camera Specs 24MP APS-C sensor 425-pt phase detection AF system with Real-Time Tracking 2.36M-dot electronic viewfinder New Bionz X processor ISO range from 100-32000 11fps burst shooting 4K/30p video capture with HLG and S-Log THE NA-A6400 UNDERWATER HOUSING Nauticam has created housings for the original A6000, the A6300, A6500 and now the A6400. Drawing on this deep connection to the A6000 family, the NA-A6400 implements the core features that have come to define Nauticam housings such as intelligent control placement, ease of setup and rugged build quality. Mission Control The NA-A6400 features integrated ergonomic handles with stainless steel stiffening brackets that provide a solid shooting platform and attachment point for lighting accessories. The handles can be adjusted outwards to accommodate larger hands or thick gloves. A large dual-stage trigger is easily reached from the right handle and provides accurate actuation of autofocus and shutter release. A thumb lever on the right side of the housing triggers the Magnify control key which can be used to control AF/MF-AEL. This control can be customized in-camera to lock or activate autofocus. This back-button autofocus control is a favorite of underwater users as it separates autofocus activation from the shutter release to prevent unwanted refocusing during sequential shots or during video shooting. A dedicated record button to trigger video recording is within easy reach of the right handle and colored red for easy identification. Switching between the high-resolution Electronic Viewfinder (EVF) and the LCD display is accomplished with a clearly marked lever to the right of the housing's viewfinder. The camera is securely mounted on a tray using a knurled thumb screw that attaches it to the tripod mounting hole on the camera. The LCD can be used in an angled configuration on the tray, making it easier to see underwater and reduce the effects of glare. The tray locks into place inside the housing, preventing it from falling out when the housing is opened and ensuring proper control alignment. Flash Trigger Flash triggering is handled via the A6400's pop-up on-board flash. A lever on the top of the NA-A6400 can be used to open or close the flash inside the housing, eliminating the need to remember engaging the flash before placing the camera in the housing. Sea&Sea-style fiber optic cable connectors are built-in to the forward facing edge of the housing above the port. HDMI Output The NA-A6400 can be used with external monitors such as the SmallHD 502B and the Nauticam NA-502B housing via the Nauticam HDMI 1.4 system. Premium Professional Optics and Accessories A camera system is just that, a system, which means that access to premium optics and accessories can limit the true functionality of even a top-level camera. Nauticam's line of water-contact optics provide true wide-angle and macro performance. The innovative bayonet mounting system or single and dual-flip adapters make installation simple. 45º and 180º magnifying viewfinders enhance the usabliity of the camera's electronic viewfinder.

FUJIFILM X-T3 The Fujifilm X-T3 features an APS-C CMOS 4 X-Trans 26.1MP Sensor. The X-T3 is powered by an upgraded X Processor 4 that is 3x faster and allows for 1.5x faster sensor readout than the X-T3. The base ISO has been lowered from 200 to 160. Oversampled DCI or UHD 4K (using full sensor width) is possible at 30p whereas 60p can be recorded with a minor 1.18x crop. The 60p footage can be captured as 10 bit 4:2:0 H.265 at 200 Mbps and recorded internally. This increases to 4:2:2 when output over HDMI. The X-T3 also features F-Log capture to maximize dynamic range, protecting highlights and shadows for editing. The X-T3 features a Natural Liveview mode when recording F-log that more closely resembles a standard monitoring LUT. Zebra warnings and focus peaking overlays as well as magnification during shooting are all improvements that video shooters will appreciate. Three custom white balance slots are available in addition to the 7 presets. The electronic viewfinder of the X-T3 is vastly improved with 3.69M dots as compared to the 2.36M dots of the X-T2. Battery life has also been improved. The X-T3 can achieve 20fps continuous shooting with Autofocus and this increases to 30fps when shooting from a 1.25x crop area. A Sport Finder mode will show this cropped area inside the EVF. Phase-detection autofocus has been increased to 98% of the sensor area. The X-T3 also features a fast 1/250 X-sync speed. Key Camera Specifications 26MP BSI 'X-Trans CMOS 4' sensor 425-point hybrid AF system 20 fps shooting with AF (11 fps with mechanical shutter) 3.69M-dot electronic viewfinder 10 bit 4:2:0 H.265 internal video capture (4:2:2 over HDMI) UHD/DCI 4K/60p from 1.18x crop region UHD/DCI 4K/30p using full width of sensor Internal F-Log capture Dual UHS-II SD card slots USB C-type connector can be used for charging battery THE NAUTICAM NA-XT3 UNDERWATER HOUSING Nauticam has supported X-T1 and X-T2 cameras and continues to create innovative and ultra-functional housings for this line with the NA-XT3. More than just an updated badge, the NA-XT3 is a complete redesign of the series. With a form factor more closely resembling the NA-A9 for Sony's A9 mirrorless camera, the NA-XT3 features DSLR-style housing and port lock mechanisms as well as integrated ergonomic handles. An optional hand strap (NA28130) can be added to the handles. The housing is designed with our Mission Control concept of placing the most important camera controls as close to the handles as possible to facilitate effortless and quick camera operation to ensure you don't miss the shot. The NA-XT3 features thumb levers near both handles, with the left thumb lever actuating the playback function and the right thumb lever the AF-L control. The housing includes two M14 and one M24 bulkhead openings and an M5 threaded hole on top (underneath the cold shoe) for an additional ball mount. The NA-XT3 uses the N100 Port System shared with the Fujifilm XH1 system. A selection of port options are available for a variety of lenses. VIDEO RECORDING FEATURES The impressive video specs of the X-T3 prompted the addition of some video-centric features to the NA-XT3. The base of the housing can accept Nauticam's Mounting Ball Set for Tripod (PN 25218), the same part as for the NA-A9. As the X-T3 can output DCI/UHD 4K at 60p with 4:2:2 quality over HDMI, a new M24 bulkhead has been incorporated into the housing to support an HDMI 2.0 connection to the Nauticam Atomos Ninja V housing (HDMI 2.0) for Atomos Ninja V 5” 4Kp60 4:4:2 10-bit Recorder/Monitor/Player (17922). Video shooting can decrease battery life so the NA-XT3 is compatible with an optional 2500 mAh USB-C Battery Pack (NA36335) that sits below the camera tray inside the housing. FLASH TRIGGERING Reliable automatic flash exposure is available with the NA-XT3 and a variety of optically fired flashes, precisely reproducing the camera’s included EF-X8 flash at a proportionally greater intensity. This system yields accurate automatic TTL flash performance – even in manual exposure mode – with no electrical sync cables to flood! The NA-XT3 is also compatible with the Nauticam Mini Flash Trigger for Panasonic/Fujifilm (PN 26305). The Flash Trigger allows for rapid fire manual flash firing via fiber optic, with no camera battery drain. The NA-XT3 comes fiber optic ready and accepts standard Sea & Sea style bushing connections. Nauticam Universal fiber optic cable system (NA26216) for Inon, Sea&Sea strobes, provide exceptional light transmission for accurate TTL performance. INTEGRATED VACUUM CHECK AND LEAK DETECTION SYSTEM The Nauticam vacuum check and leak detection system is pre-installed in the NA-XT3 as standard equipment. Combined with an optional M14 Vacuum Valve II (NA25624), this monitoring system provides constant updates throughout the dive as to watertight integrity of the housing via a multi-color LED on the rear of the housing.Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry's standard dummy text ever since the 1500s, when an unknown printer took a galley of type and scrambled it to make a type specimen book.

Das neue Gehäuse für die A7 hält, was die A7 verspricht: Vollformatkamera - kleines Gehäuse. Ein neues Port-System wurde für diese Kamera entwickelt.... die für Spiegelreflexkameras verwendete Portöffnung war zu groß, was bedeutet, dass das Gehäuse zu groß geworden wäre. Und die vorhandene Portöffnung für Mirrorless-Kameras ist zu klein für einige der Objektive, die in der neuen Sony FE Objektivreihe erwartet werden. Daher wird eine neue Reihe von Ports mittlerer Größe benötigt und mit diesem Gehäuse geliefert. Das Gehäuse und die neue Portlinie wären nicht komplett mit dem patentierten Nauticam Port-Verriegelungssystem, das, wie bei anderen Nauticam-Gehäusen, ein einzigartiges internes Bajonettsystem verwendet, das den Port sicher und ohne Verdrehen oder Fehlausrichtung verriegelt. Der berühmte rote Hebel ist einfach zu bedienen und lässt den Fotografen sofort erkennen, dass der Port sicher verriegelt ist. Auch die benutzerfreundlichen Gehäuseverriegelungen sind hier zu finden, was den Zusammenbau dieses Gehäuses besonders einfach macht. Der EVF/LCD-Schalter ermöglicht einen schnellen Wechsel zwischen der Verwendung des großen, hellen LCD-Displays und des hochauflösenden elektronischen Suchers (EVF). Das Gehäuse wird mit einem Standard .66x Sucher für den EVF geliefert, der leicht gegen einen der beiden erweiterten Sucher der Nauticam ausgetauscht werden kann. Trotz der geringen Größe ist dies ein sehr einfach zu bedienendes Gehäuse, auch mit Handschuhen. Jede Steuerung ist dort platziert, wo ein Unterwasserfotograf sie haben möchte - schließlich sind die Designer selbst Unterwasserfotografen und bemüht, jedes Nauticam-Gehäuse so ergonomisch wie möglich zu gestalten. Jede Steuerung, ob es nun darum geht, Blende oder Verschlusszeit zu ändern, auf die Autofokussperre zuzugreifen, ISO zu ändern oder die Bildwiedergabe anzusteuern, wird so gestaltet, dass Bewegungen minimiert und die Aufnahme erleichtert wird.  Integriertes elektronisches Vakuumprüf- und Leckerkennungssystem Das Nauticam Vakuumprüf- und Leckerkennungssystem ist serienmäßig mit NA-A7 erhältlich. In Kombination mit einem optionalen Vakuumventil liefert dieses Überwachungssystem ständige Updates zum wasserdichten und tauchsicheren Zustand des Gehäuses. Der Bediener kann auf einen Blick den wasserdichten und tauchsicheren Zustand des Gehäuses erkennen. Ein einfaches, codiertes LED-Beleuchtungssystem zeigt dem Benutzer an, ob das Vakuum stabil ist oder ob das Gehäuse Vakuum verliert. Die Leckageerkennung ist im gleichen Stromkreis integriert, so dass bei Wassereintritt eine akustische und optische Anzeige erfolgt.  Gummierter Zoom-/Fokusknopf: Der neue Zoom-/Fokusknopf ist jetzt gummiert, um das Greifen einfacher und komfortabler zu machen. Nauticam ist der einzige Gehäusehersteller, der umspritzte, gummierte Teile anbietet. Wie bei den vorherigen Nauticam-Griffen erhalten die eingebauten NA-A7-Griffe die Gummierung, die so viele Fotografen zu schätzen gelernt haben. Nikonos Objektivstütze: Alt trifft neu, denn die Nikonos-Objektive werden endlich mit einer Digitalkamera kombiniert, die diesen legendären Wasserkontakt-Objektiven würdig ist. Natürlich ist auch bei diesem Gehäuse die Art von Qualität und Robustheit vorhanden, die zum Synonym für den Namen Nauticam geworden ist. Das Gehäuse ist aus massivem Aluminium gefräst, hat eine Nenntiefe von 100 m und ist langlebig gebaut. Außergewöhnliche Sorgfalt wird verwendet, um jegliche Möglichkeit einer galvanischen Korrosion zu reduzieren, und das Gehäuse ist hart anodisiert, um auch nach Jahren noch gut auszusehen.

Nauticam unterstützt seit langem die spiegellosen Kameras der Fuji "X"-Linie, einschließlich der X-T1 und X-T2, und ist der Branchenführer bei der Unterstützung von spiegellosen Wechselobjektiv-Kameras unter Wasser. Nauticam hat mehr Gehäuse für spiegellose Kameras auf den Markt gebracht als jeder andere Gehäusehersteller. Aus dieser Erfahrung resultiert die am weitesten entwickelte Gehäuselinie mit dem umfangreichsten Angebot an Zubehör, das heute erhältlich ist. Zukunftsweisendes optisches Zubehör hebt die Leistung auf ein neues Niveau. Vergrößernde Sucher, die schärfsten Supermakro-Zubehörobjektive, die je hergestellt wurden, und jetzt das hochwertigste nass montierte Weitwinkelobjektiv (das WWL-1), kombiniert mit dem NA-XH1-Gehäuse, bilden ein komplettes System für jede Aufnahmesituation.  Das N100 Port System unterstützt auch eine Vielzahl von Fuji X-Mount Objektiven. Nauticam ist bekannt für Ergonomie und ein unvergleichliches Erlebnis. Die wichtigsten Bedienelemente befinden sich in unmittelbarer Zugriffsnähe des Fotografen. Das Gehäuse und das Zubehör sind leicht und einfach zu montieren.  Das NA-XH1 verfügt über ein integriertes Griffsystem, das einen außergewöhnlichen Zugang zur Steuerung auch mit dicken Handschuhen ermöglicht und die ideale Platzierung des Auslösers und der kritischen Funktionstasten am rechten Griff ermöglicht. Die Bauqualität von Nauticam ist bei Unterwasserfotografen auf der ganzen Welt bekannt. Das Gehäuse wird aus einem massiven Aluminiumblock gefertigt und anschließend hartanodisiert, wodurch es gegen Salzwasserkorrosion unempfindlich ist.  WWL-1 Kompabilität Drei hauseigene optische Designs von Nauticam, entworfen vom Gründer und Geschäftsführer Edward Lai, sind die perfekten Objektive für ein NA-XH1 Unterwassersystem. Die Magie der Nasslinsen liegt in ihrer enormen Vielseitigkeit, gepaart mit einer hervorragenden Leistung im Wasser. Sowohl Makro- als auch Superweitwinkeloptiken stehen dem Unterwasserfotografen im selben Tauchgang zur Verfügung. Diese Objektive sind vollständig für den Einsatz im Wasser entwickelt worden und bieten die höchste Bildqualität, die heute in einer Nassmontage-Optik verfügbar ist. WWL-1 ist ein Weitwinkel-Konverterobjektiv, das mit mehreren Objektiven des Fuji X-Mount-Systems kompatibel ist. Zusammen mit dem Fujinon XF 23mm F2 oder Fujinon XF 18mm F2 bietet der WWL-1 ein superweites Sichtfeld mit erstklassiger Mittenschärfe, Eckschärfe und Kontrast, was zu klarsten Weitwinkelbildern unter Wasser führt. Blitzauslösung Mit dem NA-XH1 und einer Vielzahl von optisch ausgelösten Blitzen wie den Inon Z-330, Inon Z-240, D-2000, S-2000 und Sea&Sea YS-D1/YS-D2J Blitzen mit dem optionalen Mini-Blitzauslöser für Panasonic/Fujifilm ist eine zuverlässige und schnelle manuelle Blitzbelichtung möglich. Dieses System liefert eine manuelle Blitzleistung ohne elektrische Synchronisationskabel! Der NA-XH1 wird faseroptikfertig geliefert und akzeptiert Standard-Sea&Sea Style Buchsenverbindungen. Nauticam Glasfaserkabel, die sowohl mit Inon- als auch mit Sea&Sea-Blitzen kompatibel sind, bieten die beste Lichtdurchlässigkeit aller Glasfaserkabel auf dem Markt. Blitze und Lampen können über die mitgelieferten 1? Zubehör-Montagekugeln am Gehäuse befestigt werden. INTEGRIERTES VAKUUMPRÜF- UND LECKERKENNUNGSSYSTEM Das Vakuumprüf- und Lecksuchsystem Nauticam ist serienmäßig mit NA-XH1 ausgestattet. In Kombination mit einem optionalen M14-Vakuumventil (PN 25624) informiert dieses Überwachungssystem ständig über den wasserdichten und sicheren Tauchzustand des Gehäuses. Ein einfaches, codiertes LED-Beleuchtungssystem zeigt dem Benutzer an, ob das Vakuum stabil ist oder ob das Gehäuse Vakuum verliert. Die Leckageerkennung ist im gleichen Stromkreis integriert, so dass bei Wassereintritt eine akustische und optische Anzeige erfolgt.

Das neue Gehäuse für die A7 hält, was die A7 verspricht: Vollformatkamera - kleines Gehäuse. Ein neues Port-System wurde für diese Kamera entwickelt.... die für Spiegelreflexkameras verwendete Portöffnung war zu groß, was bedeutet, dass das Gehäuse zu groß geworden wäre. Und die vorhandene Portöffnung für Mirrorless-Kameras ist zu klein für einige der Objektive, die in der neuen Sony FE Objektivreihe erwartet werden. Daher wird eine neue Reihe von Ports mittlerer Größe benötigt und mit diesem Gehäuse geliefert. Das Gehäuse und die neue Portlinie wären nicht komplett mit dem patentierten Nauticam Port-Verriegelungssystem, das, wie bei anderen Nauticam-Gehäusen, ein einzigartiges internes Bajonettsystem verwendet, das den Port sicher und ohne Verdrehen oder Fehlausrichtung verriegelt. Der berühmte rote Hebel ist einfach zu bedienen und lässt den Fotografen sofort erkennen, dass der Port sicher verriegelt ist. Auch die benutzerfreundlichen Gehäuseverriegelungen sind hier zu finden, was den Zusammenbau dieses Gehäuses besonders einfach macht. Der EVF/LCD-Schalter ermöglicht einen schnellen Wechsel zwischen der Verwendung des großen, hellen LCD-Displays und des hochauflösenden elektronischen Suchers (EVF). Das Gehäuse wird mit einem Standard .66x Sucher für den EVF geliefert, der leicht gegen einen der beiden erweiterten Sucher der Nauticam ausgetauscht werden kann. Die NA-A7 beinhaltet einen vorinstallierten 5-poligen Nikonos-Anschluss mit universellem Blitzschuhanschluss (nur x- und Masseanschluss), der eine manuelle Steuerung der gängigsten Blitze, wie beispielsweise des Inon Z-240 oder Sea&Sea YS-D1, ermöglicht. Der Blitz kann auch optisch mit dem Nauticam Blitzauslöser angesteuert werden. Trotz der geringen Größe ist dies ein sehr einfach zu bedienendes Gehäuse, auch mit Handschuhen. Jede Steuerung ist dort platziert, wo ein Unterwasserfotograf sie haben möchte - schließlich sind die Designer selbst Unterwasserfotografen und bemüht, jedes Nauticam-Gehäuse so ergonomisch wie möglich zu gestalten. Jede Steuerung, ob es nun darum geht, Blende oder Verschlusszeit zu ändern, auf die Autofokussperre zuzugreifen, ISO zu ändern oder die Bildwiedergabe anzusteuern, wird so gestaltet, dass Bewegungen minimiert und die Aufnahme erleichtert wird.  Integriertes elektronisches Vakuumprüf- und Leckerkennungssystem Das Nauticam Vakuumprüf- und Leckerkennungssystem ist serienmäßig mit NA-A7 erhältlich. In Kombination mit einem optionalen Vakuumventil liefert dieses Überwachungssystem ständige Updates zum wasserdichten und tauchsicheren Zustand des Gehäuses. Der Bediener kann auf einen Blick den wasserdichten und tauchsicheren Zustand des Gehäuses erkennen. Ein einfaches, codiertes LED-Beleuchtungssystem zeigt dem Benutzer an, ob das Vakuum stabil ist oder ob das Gehäuse Vakuum verliert. Die Leckageerkennung ist im gleichen Stromkreis integriert, so dass bei Wassereintritt eine akustische und optische Anzeige erfolgt. 

Die NA-XT2 übernimmt das Beste aus den bisherigen Spiegereflex- und Mirrorless High-End-Nauticam-Gehäusen und übernimmt gleichzeitig die manuelle Blendensteuerung, die für diese spezielle Kamera erforderlich ist. Das Gehäuse ist klein, jedoch nicht auf Kosten der Funktionalität oder Ergonomie. Integrierte Griffe bieten eine stabile und komfortable Basis für die Bedienung des Systems. Ein ergonomischer Auslösehebel und gut platzierte Drehregler sorgen für ein hervorragendes Tastgefühl. Wichtige Drucktasten befinden sich in Reichweite der Griffe. Die Kamerasteuerungen haben genügend Abstand, um eine einfache Bedienung, auch mit Handschuhen, zu ermöglichen. Zusammen mit dem NA-XT2 wurde ein neues Zubehör-Akkupack auf den Markt gebracht!  Diese Batterie mit größerer Kapazität verlängert die Zeit zwischen den Batteriewechseln erheblich und ermöglicht es, dass das Gehäuse zwischen den Tauchgängen geschlossen bleibt. Der Akkupack schiebt sich bequem in das Unterwassergehäuse unterhalb der Kameramontageplatte. Das Fujinon XF10-24mm F4 R OIS Weitwinkel-Zoomobjektiv und das Zeiss Touit 2.8/50M Makroobjektiv werden unterstützt. Mit Fujis High-End-Objektiven (genannt "XF"-Linie) und dem Zeiss 50mm-Makro wird die Blende nicht elektronisch durch die Kamera, sondern über einen Objektivring gesteuert. Dieser Old-School-Ansatz wird bei jedem ankommen, der zum Beispiel mit älteren Nikon Spiegelreflexkameras vor den Tagen der elektronischen Blende gearbeitet hat. Verwenden Sie den Nauticam-Blendenring (NA36422) für das Zeiss 50mm Makro und (NA36421) die Blende, (NA36441) die Zoomräder für die 10-24mm. Die sichere, einzeln drehbare Gehäuseverriegelung öffnet den Gehäuseboden. Die Kamera lässt sich leicht einführen. Der O-Ring des rückwärtig montierten Gehäuses erleichtert die Wartung. Zwei faseroptische Synchronisationsanschlüsse sind Standard und nutzen die Vorteile des mit der Kamera gelieferten EF-X8-Blitz für die Blitzauslösung. Um das Beste aus dem exzellenten elektronischen Sucher X-T2 (EVF) herauszuholen, ermöglicht Nauticam die Installation der beliebten 45º- und 180º-Vergrößerungssucher, die eine optimale klare Komposition und Fokussierbarkeit bieten. Blitzstecker für Glasfaserkabel TTL Mit dem NA-XT2 und einer Vielzahl von optisch ausgelösten Blitzen ist eine zuverlässige automatische Blitzbelichtung möglich. Die Inon Z-240, D-2000, S-2000 und Sea&Sea YS-D1/YS-D2 Blitze sorgen für eine automatisierte Beleuchtung und reproduzieren präzise den mitgelieferten EF-X8-Blitz der Kamera mit proportional höherer Intensität.  Dieses System liefert eine präzise automatische TTL-Blitzleistung - auch im manuellen Belichtungsmodus - ohne elektrische Synchronisationskabel! Der NA-XT2 ist auch mit dem Nauticam Mini-Blitzauslöser für Panasonic/Fujifilm (NA26305) kompatibel. Der Blitzauslöser ermöglicht eine schnelle manuelle Blitzauslösung über Glasfaser, ohne dass die Batterie der Kamera entladen wird. Der NA-XT2 wird mit Glasfaseranschluss geliefert und akzeptiert Standard-Sea&Sea-Style-Buchsenanschlüsse. Nauticam Universal Glasfaserkabelsystem (#26216) für Inon, Sea&Sea Blitze, bietet außergewöhnliche Lichtübertragung für präzise TTL-Leistung. Sucheroptionen Ein klarer Blick für Feinfokussierung und Komposition ist entscheidend für eine erfolgreiche Unterwasserfotografie, und nichts geht über einen vergrößernden Sucher.  Diese Sucher nutzen die Fernsicht, nicht die Nahsicht, und bieten eine große, klare Sicht auf das hochauflösende, 2,36 Mio. Punkt OLED EVF auf dem X-T2. Beide Sucher sind in den Formaten 45º (NA32205) und Gerade (NA32204) erhältlich und verfügen über eine externe Dioptrieneinstellung zur perfekten Korrektur der Sehkraft des Fotografen. Integriertes  Vakuumprüf- und Lecksuchsystem  Das Vakuumprüf- und Lecksuchsystem von Nauticam ist serienmäßig mit dem NA-XT2 erhältlich. In Kombination mit einem optionalen Vakuumventil (NA25624) informiert dieses Überwachungssystem ständig über den wasserdichten und sicheren Tauchzustand des Gehäuses.  Ein einfaches, codiertes LED-Beleuchtungssystem zeigt dem Benutzer an, ob das Vakuum stabil ist oder ob das Gehäuse Vakuum verliert. Die Leckageerkennung ist im gleichen Stromkreis integriert, so dass bei Wassereintritt eine akustische und optische Anzeige erfolgt.

THE CANON EOS R5C CAMERA The Canon EOS R5C is the latest in Canon's full-frame mirrorless camera lineup which has gained unprecedented demand.  It features the RF lens mount which has the same large 54mm diameter but the ability to have larger rear lens elements that are closer to the sensor gives increased corner and outer edge sharpness.  The R5C uses an all new 45MP CMOS sensor with in-body image stabilization which can reduce shake by up to 8 stops.  The camera's Dual Pixel autofocus system uses 1053 autofocus points across the entire frame.   It is also capable of recording 8K video at 24p or 30p and 4K at up to 120p.   The EOS R5C can also use the large EF-mount lens lineup via three optional adapters, a simple EF to R adapter, one which supports the customizable control ring and another that features a drop-in filter mount. Key Camera Specifications 45MP full-frame Dual Pixel CMOS sensor 8K Video, with option for RAW or 10-bit 4:2:2 C-log or HDR PQ Up to 4K/120p, or oversampled 4K up to 30p 100% coverage Dual Pixel II AF system 12 fps / 20 fps burst (mechanical / electronic shutter) 5.76M-dot OLED EVF with 120fps max refresh rate 3.2" 2.1M-dot fully articulating touchscreen 10-bit HDR photos in HEIF format 1x CFExpress slot, 1x UHS-II SD slot Weather sealing   THE NAUTICAM NA-R5C UNDERWATER HOUSING FOR THE CANON EOS R5C CAMERA The NA-R5C underwater housing follows suit with Nauticam's drive for innovation. Both the Canon EOS R5C and EOS R present shooters with the ability to use both the available legacy EF lenses via an adapter in addition to their native RF optics.  To support both the legacy and native lenses, Nauticam has integrated the NA-R5 into the N120 port system. Canon's EF to RF mount adapters can be affixed to the camera before insertion into the housing. When using the EOS RC5 inside the housing with the adapter and a supported EF lens, the port and extension ring arrangement will be identical to the same setup on a Nauticam Canon N120 DSLR. As the RF lens lineup emerges, dedicated port and extension ring combinations will be listed on the Port Chart. Two lens release buttons, one for RF and one for EF lenses used with the optional Canon adapter, are located on the front of the housing to make lens removal through the port opening simple. Mission Control Nauticam engineers are obsessed with getting the underwater image maker unfettered access to all the necessary controls, with as many within easy reach of the ergonomic rubberized handles. This Mission Control philosophy extends to the NA-R5C where a dual thumb lever and dual sub-lever are placed by the right handle. The upper thumb lever activates the "AF-On" and the lower the "Q" buttons while the sub-lever corresponds to the "M-Fn" and "Record" buttons. Near the left handle is a thumb lever for "Playback" as well as a dedicated switch to change from using LCD to the EVF. Large knurled and rubberized control dials access the camera's "main" and "sub" command dials. The two-stage trigger allows for smooth focus and firing activation. Additional buttons for "Menu", "Focus Point Selection" and others are also easily reached from the handles. An additional control wheel is located on the left side of the housing and will interface with the control ring on the supported EF to EOS R Mount Adapter with Control Ring using the optional gear (NA19561). Flash Triggering Flash triggering is achieved via one of two optional Flash Triggers, a manual LED trigger (NA26301) or a TTL Flash Trigger (NA26321) that use the built-in fiber optic bulkheads with optional fiber-optic cables to trigger supported strobes. For controlling strobes that do not support fiber optic flash triggering, a variety of legacy hot-shoe flash control bulkheads are available. INTEGRATED VACUUM CHECK AND LEAK DETECTION SYSTEM The Nauticam vacuum check and leak detection electronics are shipped with the NA-R5C as standard equipment. Combined with an accessory vacuum valve this monitoring system provides constant updates on the water tight and safe-to-dive status of the housing. A simple color coded LED lighting system lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur. The Nauticam system is temperature compensated, eliminating false alarms caused by a change in outside temperature, or from a camera heating up on an action packed dive.

Mit der PowerShot G5 X Mark II legt Canon die Leistungsmesslatte für seine mit einem 1"-Sensor ausgestatteten Kompaktkameras weiter hoch. Bei dieser zweiten Generation der G5 X ist der 20,1-MP-CMOS-Sensor mit dem schnellen DIGIC 8-Prozessor gekoppelt, der sowohl die Autofokus-Fähigkeit als auch die Serienbildgeschwindigkeit und die Bildverarbeitung deutlich verbessert. Das 24-120-mm-Zoomobjektiv verfügt über eine maximale Blendenöffnung von F1,8 und die optische Bildstabilisierung von Canon. Die G5 X Mark II erhält außerdem 4K 30p UHD-Videoaufnahmen unter Ausnutzung der vollen Sensorbreite und einen sauberen HDMI-Ausgang. Die Nauticam Unterwassergehäuse für die Canon Powershot G5 X Mark II sind so konzipiert, dass sie intuitiv, vielseitig und zuverlässig sind und gleichzeitig ein unvergleichliches Unterwasser-Aufnahme-Erlebnis bieten. Das NA-G5XII baut auf einer langen Reihe von Nauticam-Gehäusen auf, zu denen die ursprüngliche G5 X und drei Versionen ihres Geschwistermodells G7 X gehören. Das Gehäuse ist um das erweiterbare N50-Wechselport-System herum aufgebaut.  DIE CANON POWERSHOT G5 X MARK II Die Maximierung von Leistung, Flexibilität und Portabilität ist das Ziel der Canon G5 X Mark II. Die zweite Iteration des G5 X Modells, die G5 X Mark II, basiert auf einem 20,1MP 1" Stacked CMOS Sensor. Das Stacked-Design ermöglicht eine schnellere Übertragung und Verarbeitung der Bilddaten sowie eine höhere Autofokus- und Serienbildleistung. Wichtige Kamera-Spezifikationen 20,1MP 1"-Typ Stacked CMOS-Sensor DIGIC 8 Bildprozessor 24-120mm Äquivalent F1.8-2.8 Zoomobjektiv Serienaufnahmen mit bis zu 30 Bildern pro Sekunde 4K/30p UHD und 1080/120p HD-Aufnahme Sauberer HDMI-Ausgang USB 3.1 (USB-C) Anschluss zum Laden und Übertragen Autofokus und Serienaufnahmen Dank des weiterentwickelten Stacked-CMOS-Sensors und des DIGIC 8 Bildprozessors kann die G5 X Mark II bei aktivierter Autofokusverfolgung Bilder mit 20 Bildern pro Sekunde aufnehmen. Mit gesperrtem Autofokus gibt es auch einen 30fps RAW Burst Mode. Der DIGIC 8 verspricht auch eine überragende ISO-Leistung. Die G5 X Mark II hat einen ISO-Bereich von 125-6.400, erweiterbar auf 25.600. Die maximale Verschlusszeit beträgt 1/2000sec und 1/25600sec für den elektronischen Verschluss. Videoaufzeichnung Wo die ursprüngliche G5 X auf HD-Aufnahmen beschränkt war, bietet die G5 X Mark II zusätzlich UHD 4K-Aufnahmen bei 30p mit einer respektablen Bitrate von 120 Mbps mit H.264-Kompression auf UHS-1 SDHC- oder SDXC-Karten. Das OIS-stabilisierte Objektiv mit einem Brennweitenbereich von 24-120 mm (äquivalent) verfügt außerdem über einen variablen Neutraldichtefilter mit 3 Blendenstufen, um videofreundliche Verschlusszeiten bei hellen Lichtverhältnissen beizubehalten oder um künstlerische Makroaufnahmen mit geringer Schärfentiefe zu erzielen, während gleichzeitig das Eindringen von Umgebungslicht minimiert wird. Die G5 X Mark II verfügt über einen Micro-HDMI-Anschluss vom Typ D, der saubere 4K- oder HD-Videos übertragen kann. DAS NAUTICAM NA-G5XII UNTERWASSERGEHÄUSE Nauticam-Gehäuse sind so konzipiert, dass sie intuitiv, vielseitig und zuverlässig sind und gleichzeitig eine unvergleichliche Erfahrung bei der Bildaufnahme unter Wasser bieten. Ob für eine Kompaktkamera oder eine Kinokamera, jedes Gehäuse ist so konzipiert, dass es nicht nur ein Gehäuse für die Kamera ist, sondern ein Werkzeug, das die Benutzererfahrung verbessert. Unsere Mission Control-Philosophie zielt darauf ab, wichtige Bedienelemente dort zu platzieren, wo man sie am meisten braucht, und nicht dort, wo sie zufällig auf der Kamera zu finden sind. Das NA-G5XII baut auf einer langen Reihe von Nauticam-Gehäusen auf, zu denen das ursprüngliche G5 X und drei Versionen seines G7 X-Geschwisters gehören. Das Gehäuse ist um das expandierende N50-Wechselportsystem herum aufgebaut. HINWEIS: Das NA-G5XII unterstützt nicht die Verwendung des Pop-Up-EVF der Kamera innerhalb des Gehäuses. Bedienung Der NA-G5XII verfügt über einen zweistufigen Auslöser, einen großen feststellbaren Zoomhebel und gerändelte Einstellräder für die Regler MODE und Belichtungskorrektur.  Ein strukturiertes Einstellrad an der Vorderseite des Unerweassergehäuses, das sich in Reichweite der natürlichen Handposition befindet, steuert den Objektivsteuerring der Kamera. Auf der Rückseite des Gehäuses befinden sich zusätzlich zum Vierwegeregler Tasten für die anpassbare "*"-Taste, die als AF-ON-Steuerung zugewiesen werden kann, um die beliebte Rücktastenmethode der Autofokus-Steuerung sowie die Aufnahmetaste zu erleichtern.  Bei dieser Methode wird die Aktivierung des Autofokus vom Auslöser entfernt und ausschließlich durch Drücken der AF-ON-Steuertaste gesteuert, um eine Neufokussierung durch die Kamera zwischen den Auslöserdrücken zu verhindern. Die RECORD-Taste kann auch mit einer Vielzahl anderer Funktionen belegt werden, wie z.B. der Aktivierung des 30fps RAW Burst-Modus. HDMI-Videoausgang Mit der UHD 4K 30p Clean-Videosignalausgabe über HDMI mit voller Sensorbreite kann der G5 X Mark II mit einem externen Monitor wie dem SmallHD 502 Bright kombiniert werden, um die Komposition und genaue Beurteilung von Fokus und Belichtung zu unterstützen. Der M16-Gewindeanschluus des NA-G5XII-Gehäuses kann so ausgestattet werden, dass es die HDMI-Ausgabe über HDMI 1.4 an Nauticam-Monitorgehäuse wie den NA-502B unterstützt. Einzelheiten finden Sie in der Liste des empfohlenen Zubehörs in der Seitenleiste. Hochwertige professionelle Optik Das N50-Wechselport-System bedeutet, dass die NA-G5XII die Vorteile der erstklassigen professionellen Unterwasseroptik von Nauticam nutzen kann. Das Gehäuse wird mit dem N50-Standardport geliefert, der die Nutzung des vollen 24-120-mm-Äquivalenzzoombereichs der Kamera sowie der CMC-1-, CMC-2- und SMC-1-Makrooptik (2,3-fache Vergrößerung) ermöglicht, wenn sie mit dem optionalen M67-Flip-Dioptrienhalter (NA25107) ausgestattet ist.  Beachten Sie, dass das SMC-1 optimale Ergebnisse liefert, wenn es über die äquivalente Zoomlänge von 90 mm hinaus verwendet wird und bei größeren Sichtfeldern oder größeren Brennweiten vignettiert. Um das ursprüngliche Sichtfeld des Objektivs wiederherzustellen, kann das NA-G5XII mit dem 3,5-Zoll-Acrylglas-Dome-Port N50 verwendet werden. Dieser Port ermöglicht auch die Nutzung des vollen Zoombereichs, kann aber keine Vorsatzlinsen aufnehmen. Die Nauticam WWL-1B (NA83202) und WWL-C (NA83203) Vorsatzlinsen von Nauticam bringen eine professionelle Weitwinkelleistung in das NA-G5XII und bieten ein Sichtfeld von 130º und einen minimalen Fokussierabstand von null Zentimeter.  Das WWL-1 arbeitet innerhalb des Zoombereichs von 28-50 mm, während das WWL-C im Bereich von 24-50 mm arbeitet.  Um das WWL-1 oder WWL-C zu verwenden, benötigt der NA-G5XII den optionalen N50-Kurzport 25 mit Bajonettanschluss (NA38703).  Das Bajonettsystem ermöglicht die einfache Entfernung des Objektivs unter Wasser, um die Flexibilität des Systems weiter zu erhöhen.  Blitzauslösung Die NA-G5XII verfügt über eingebaute optische Anschlüsses, die den internen Blitz der Kamera über optionale universelle Glasfaserkabel (NA26216) an unterstützte externe Blitzgeräte übertragen. Der interne Blitz kann innerhalb des Gehäuses angehoben und abgesenkt werden, um einen schnellen Wechsel zwischen natürlichem und künstlichem Licht zu ermöglichen.   Weiteres Zubehör Der NA-G5XII wird mit Stabilisierungsbügeln aus Edelstahl und einer Auslöserverlängerung geliefert, die mit dem optionalen Flexitray II-System verwendet werden kann.  Das Gehäuse verfügt außerdem über einen Kaltschuh und M10-Gewindehalterungen. Integriertes Vakuumprüf- und Leckagewarnsystem Das Nauticam-Vakuumprüf- und Lecksuchsystem wird standardmäßig mit dem NA-G5XII ausgeliefert. In Kombination mit einem Zubehör M14-Vakuumventil II (optional) liefert dieses Überwachungssystem ständig aktuelle Informationen über den wasserdichten und tauchsicheren Zustand des Gehäuses. Ein einfaches farbcodiertes LED-Beleuchtungssystem lässt den Benutzer wissen, dass das Vakuum fest ist oder dass das Gehäuse das Vakuum verliert. Die Leckerkennung ist in den gleichen Stromkreis integriert, so dass bei Wassereintritt eine akustische und optische Anzeige erfolgt.  Das Nauticam-System ist temperaturkompensiert, so dass Fehlalarme aufgrund einer Änderung der Außentemperatur oder durch eine Kamera, die sich bei einem Tauchgang voller Action aufheizt, vermieden werden.

The Canon PowerShot G7XIII ProPackage consists of: NA-G7XIII underwater housing from Nauticam N50 standard port Grip plate with 1-inch ball heads Mounting for grip plate Shutter release extension Vacuum valve The Canon G7X Mark III Camera Offering multimedia fluency within a compact design, the Canon PowerShot G7X Mark III is a sleek camera distinguished by its advanced sensor design and flexible imaging capabilities. Its 20.1MP 1" CMOS sensor uses a stacked design, which pairs with the DIGIC 8 image processor to realize especially fast focusing performance, full-resolution shooting at up to 20 fps, and UHD 4K30p video recording. Optically, the G7X Mark III houses a 4.2x zoom lens, which covers a 24-100mm equivalent focal length range for wide-angle to short-telephoto fields of view. An f/1.8-2.8 maximum aperture range suits working in difficult lighting conditions as does an Optical Image Stabilizer, which compensates for the effects of camera shake. The camera's slim design also incorporates a 3.0" 180° tilting touchscreen LCD and has both Bluetooth and Wi-Fi for wirelessly connecting to a mobile device. Key Camera Specifications 20.1MP 1"-type BSI CMOS sensor 24-100mm F1.8-F2.8 lens 3" tilting touchscreen LCD 30 fps continuous shooting at 8.8 MP resolution (RAW) 4k/30p 1080/60p video capture The Nauticam G7XIII-ProPackage NA-G7XIII is the latest iteration in a lineup of advanced housings for very capable compact cameras supported by Nauticam. Many features found on professional DSLR systems have been integrated into this system, and the result is an underwater housing that allows the user to harness the full potential of this advanced compact camera in the water. The basic functions and ergonomic enhancements that Nauticam users have grown to know and love are incorporated in NA-G7XIII. The housing is machined from a solid block of aluminum, then hard anodized to seal out corrosive salt water. It is closed via a simple, yet secure locking rotary latch. The right side of the housing is sculpted to fit the palm of the user’s hand, and Nauticam’s two-stage shutter release lever provides clear differentiation between the half press and full press shutter release positions. All functions are clearly labeled. The Nauticam leak alarm and vacuum monitoring system is installed as standard equipment. This system provides an audible and visual alert to any water entry in the housing, the watertight integrity of the system can be tested before ever entering the water and monitored during every dive. Expert product design, modern manufacturing techniques, top quality materials backed by a two-year warranty, and a critical focus on the user experience combine to produce the premier system for Canon Powershot G7X Mark III. The Nauticam NA-G7XMKIII. The N50 Port System The NA-G7X Mark III comes with the "standard" port, but other ports are available through the N50 system.  Included with the body, this port allows full zoom and has a 67mm threaded mount for attaching macro attachment lenses or a swivel adapter. This port is ideal for mid-range portrait photography or close-up and macro photography with additional wet lenses. Integrated vacuum testing and leak detection system The Nauticam vacuum testing and leak detection system is supplied as standard with NA-G7XMKIII. Combined with the included vacuum valve, this monitoring system constantly informs the user of the watertight and safe diving condition of the underwater housing. A simple colour-coded LED lighting system indicates to the user that the vacuum is solid or that the housing is losing vacuum. Leak detection is integrated into the same circuit, providing an audible and visual indication of water ingress. The Nauticam system is temperature compensated and eliminates false alarms caused by a change in outside temperature or by a camera heating up during an action-packed dive. HDMI output The Canon PowerShot G7X Mark III has an HDMI output for video, enabling the use of external monitors that facilitate easier assessment of exposure, focus and composition than when using the camera's built-in LCD monitor. Nauticam has incorporated an M16 connector on the NA-G7XIII to take advantage of HDMI connectivity. By adding the optional Socket Extension (NA25028) and HDMI connector (NA25032), the NA-G7XIII is compatible with external monitor housings such as the NA-502B-H or NA-Ninja V (HDMI 1.4 connector only).

The housing for Olympus OM-D E-M1 Mark III allows to capitalize on the camera full potential and to capture amazing pictures underwater. Product details An easy to use highly professional product has been created through techniques and innovations gained from years of experience. Easy access to all key/main camera controls, even with gloves, by means of clearly labelled lasered long life buttons. The back door has a large window glass for a fine camera display and optical viewfinder view and it is entirely detached from the front body to make easier the camera fitting. The housing stands with great stability due to sturdy and wide rubber feet located on the bottom. Ergonomic side handles are included. ONE HAND OPEN/CLOSE It's very easy to open and close Olympus OM-D E-M1 Mark III, without efforts by the user thanks to the upper helicoid and the bottom centered pins; the camera is placed easily into the housing on a sliding tray that keeps the camera robustly in place. PORTS AND EXTENSION RING A series of ports and extension rings are available in dedicated section. The removable port is fitted thanks to markers and a bayonet 102 mm connection to the Olympus OM-D E-M1 Mark III housing. The interchangeable port bodies and extensions rings combine to allow the use of most of lenses on the market for maximum versatility and performance.  LIGHTING Two fiber optic connections are placed in front of the built-in flash and allow the use of external strobe. CONSTRUCTION AND SAFETY Only the best materials are used to manufacture our housings such as anodized aluminum, which is anticorodal and thermo-coated, and stainless steel. A longlasting product that requires easy and simple maintenance by the user. Dual high precision and quality O-Ring seals protect and ensure a perfect and secure watertight for all movable and / or removable parts; a red alarm for humidity/water inside the housing is powered by a battery replaceable by the user. Working depth is 100 metres. Different accessories can be fitted directly on the handles or by means of an M8 upper threaded hole, using the Isotta top handle or via the M6 and M8 threaded holes on the bottom. Controls ON/OFF of Olympus OM-D E-M1 Mark III; Own camera strobe open/close; Ergonomic camera focusing and shutter button for an easy use with gloves; Lens release; Rear control panel; Upper control panel; All controls are available on the housing;

Sony's latest full frame mirrorless camera, the a7C offers the underwater image maker one of the most compact and travel friendly full frame systems available on the market today.  The a7C features Sony's latest stellar autofocus and a much improved battery life thanks to its use of the larger Z series battery. The BIONZ X processor delivers superb low-light performance and faster image processing. For video shooters, the a7C features internal UHD 4K capture in the wide-dynamic range HLG image profile at up to 30p. THE SONY A7C FULL FRAME CAMERA The 24MP Sony a7C is Sony's newest and smallest full frame camera.  It resembles a body size closer to the APS-C sensor Sony a6600, yet offers the same hybrid, real-time tracking autofocus system as the higher-end alpha models from Sony.  It offers 5-axis image stabilization and can shoot bursts up to 10fps with auto focus.   Key Camera Specs 24MP BSI CMOS full frame sensor "Real-time tracking" AF System Oversampled 4K video up to 30p (1.2x crop), including 8-bit S-Log and HLG Continuous shooting up 10fps 3.0" 921.6k-Dot Vari-Angle Touchscreen 2.36m-Dot OLED Electronic Viewfinder 5-Axis In-Body Image Stabilization Large 'Z-type' battery, rated to 740 shots per charge While the a7C shares a great deal in common with the a7 III, the biggest standout difference is the size.  According to Sony, the a7C is the world's smallest full frame interchangeable lens camera with in body stabilization.  Not only is it much smaller, but the a7C also gained Sony's latest auto focus technology making this a clear competitor in the compact mirrorless market.  Along with the a7C, Sony also introduced the compact FE 28-60mm f/4-5.6 lens which is fully compatible with both the Nauticam WWL-1 and WACP-1.     THE NAUTICAM NA-A7C UNDERWATER HOUSING Nauticam is the industry leader in mirrorless interchangeable lens underwater camera support. Nauticam has housed more mirrorless cameras, and more Sony E Mount cameras than any other housing manufacturer. This experience results in the most evolved housing line with broadest range of accessories available today. Pioneering optical accessories elevate performance to a new level. Magnifying viewfinders, the sharpest super macro accessory lenses ever made, and now the highest quality water contact wide angle lenses (the WWL-1 and WACP-1) combine with the NA-A7C housing to form a complete imaging system. Nauticam is known for ergonomics, and an unmatched experience. Key controls are placed at the photographer’s fingertips. The housing and accessories are light weight, and easy to assemble. The camera drops in without any control presetting, and lens port changes are effortless. NA-A7C features an integrated handle system. This ergonomic style provides exceptional control access, even with thick gloves, with ideal placement of the shutter release and a thumb-lever to actuate the AF-ON button from the right handle. Nauticam build quality is well known by underwater photographers around the globe. The housing is machined from a solid block of aluminum, then hard anodized making it impervious to salt water corrosion. Marine grade stainless and plastic parts complete the housing, and it is backed by a two year warranty against manufacturing defects. PREMIUM OPTICS Several in-house Nauticam optical designs, designed by founder and Managing Director Edward Lai, are the perfect lenses to pair with an a7C underwater system. The magic of the water contact lenses is their tremendous versatility, paired with outstanding in-water performance. Both macro and super wide angle optics are available to the underwater photographer on the same dive. These lenses are completely engineered for use in water, providing the highest image quality available today in a water contact optic.  While there are many options, we'll focus on the most compact and versatile setup to match the travel friendly size of the a7C.   WWL-1 is a wide angle conversion lens, compatible with the Sony FE 28-60mm f/4-5.6 lens, providing 130 degree diagonal field of view with full zoom through! The WWL-1 offers class leading center sharpness, corner sharpness, and contrast resulting in some of the best wide angle images possible underwater. CMC-1 and CMC-2 provide the best macro performance for the Sony FE 28-60mm f/4-5.6 lens, with two different magnification strengths, suitable for a wide variety of macro subjects.  CMC-2 is less strong, making it easier to use with more accurate autofocus. CMC-1 is best suited for the smallest of macro subjects. Macro enthusiasts will surely want both! FAST AND RELIABLE FLASH TRIGGERING Reliable rapid fire manual flash triggering is available with the NA-A7C for a variety of optically fired flashes when used with the LED Flash Trigger (NA26302). The NA-A7C comes fiber optic ready and accepts the Universal Fiber Optic Cable (NA26216). Strobes and light arms can be attached to the housing via included 1″ accessory mounting balls.  Electrical strobe triggering is still an option for those with an investment in legacy lighting gear, requiring the purchase of an accessory electrical bulkhead (NA25056). INTEGRATED VACUUM CHECK AND LEAK DETECTION SYSTEM The Nauticam vacuum check and leak detection system is available with NA-A7C as standard equipment. Combined with an optional vacuum valve (PN 25624), this monitoring system provides constant updates on the water tight and safe-to-dive status of the housing. A simple coded LED lighting system lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur.

THE CANON EOS R5 CAMERA The Canon EOS R5 is the latest in Canon's full-frame mirrorless camera lineup which has gained unprecedented demand.  It features the RF lens mount which has the same large 54mm diameter but the ability to have larger rear lens elements that are closer to the sensor gives increased corner and outer edge sharpness.  The R5 uses an all new 45MP CMOS sensor with in-body image stabilization which can reduce shake by up to 8 stops.  The camera's Dual Pixel autofocus system uses 1053 autofocus points across the entire frame.   It is also capable of recording 8K video at 24p or 30p and 4K at up to 120p.   The EOS R5 can also use the large EF-mount lens lineup via three optional adapters, a simple EF to R adapter, one which supports the customizable control ring and another that features a drop-in filter mount. Key Camera Specifications 45MP full-frame Dual Pixel CMOS sensor 8K Video, with option for RAW or 10-bit 4:2:2 C-log or HDR PQ Up to 4K/120p, or oversampled 4K up to 30p 100% coverage Dual Pixel II AF system 12 fps / 20 fps burst (mechanical / electronic shutter) 5.76M-dot OLED EVF with 120fps max refresh rate 3.2" 2.1M-dot fully articulating touchscreen 10-bit HDR photos in HEIF format 1x CFExpress slot, 1x UHS-II SD slot Weather sealing   THE NAUTICAM NA-R5 UNDERWATER HOUSING FOR THE CANON EOS R CAMERA The NA-R5 underwater housing follows suit with Nauticam's drive for innovation. Both the Canon EOS R5 and EOS R present shooters with the ability to use both the available legacy EF lenses via an adapter in addition to their native RF optics.  To support both the legacy and native lenses, Nauticam has integrated the NA-R5 into the N120 port system. Canon's EF to RF mount adapters can be affixed to the camera before insertion into the housing. When using the EOS R5 inside the housing with the adapter and a supported EF lens, the port and extension ring arrangement will be identical to the same setup on a Nauticam Canon N120 DSLR. As the RF lens lineup emerges, dedicated port and extension ring combinations will be listed on the Port Chart. Two lens release buttons, one for RF and one for EF lenses used with the optional Canon adapter, are located on the front of the housing to make lens removal through the port opening simple. Mission Control Nauticam engineers are obsessed with getting the underwater image maker unfettered access to all the necessary controls, with as many within easy reach of the ergonomic rubberized handles. This Mission Control philosophy extends to the NA-R5 where a dual thumb lever and dual sub-lever are placed by the right handle. The upper thumb lever activates the "AF-On" and the lower the "Q" buttons while the sub-lever corresponds to the "M-Fn" and "Record" buttons. Near the left handle is a thumb lever for "Playback" as well as a dedicated switch to change from using LCD to the EVF. Large knurled and rubberized control dials access the camera's "main" and "sub" command dials. The two-stage trigger allows for smooth focus and firing activation. Additional buttons for "Menu", "Focus Point Selection" and others are also easily reached from the handles. An additional control wheel is located on the left side of the housing and will interface with the control ring on the supported EF to EOS R Mount Adapter with Control Ring using the optional gear (NA19561). Flash Triggering Flash triggering is achieved via one of two optional Flash Triggers, a manual LED trigger (NA26301) or a TTL Flash Trigger (NA26321) that use the built-in fiber optic bulkheads with optional fiber-optic cables to trigger supported strobes. For controlling strobes that do not support fiber optic flash triggering, a variety of legacy hot-shoe flash control bulkheads are available. Integrated vacuum check and leak detection system The Nauticam vacuum check and leak detection electronics are shipped with the NA-R5 as standard equipment. Combined with an accessory vacuum valve this monitoring system provides constant updates on the water tight and safe-to-dive status of the housing. A simple color coded LED lighting system lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur. The Nauticam system is temperature compensated, eliminating false alarms caused by a change in outside temperature, or from a camera heating up on an action packed dive.

The X-T4, Fujifilm's latest APS-C mirrorless hybrid camera, adds a list of significant upgrades when compared to its predecessors.  Some of the most noticeable improvements are in-body stabilization, battery life, and auto focus tracking performance. As still/video hybrids become more popular, Fuji is offering a 26MP, high-resolution electronic viewfinder camera that can record internal 10 bit 4:2:0 H.265 DCI/UHD 4K video or 4:2:2 over HDMI as well as shooting an impressive 20fps of continuous stills. FUJIFILM X-T4 The Fujifilm X-T4 features an APS-C CMOS 4 X-Trans 26.1MP Sensor. The X-T4 is powered by a proven X Processor 4 which provides fast performance and improved responsiveness. Newly added in-body stabilization delivers up to a 6.5EV benefit which is a significant addition for video shooters.  The improved autofocus tracking system now considers color and shape as well as distance information, providing a noticeable improvement over the X-T3.   Oversampled DCI or UHD 4K (using full sensor width) is possible at 30p whereas 60p can be recorded with a minor 1.18x crop. The 60p footage can be captured as 10 bit 4:2:0 H.265 at 200 Mbps and recorded internally. This increases to 4:2:2 when output over HDMI. The X-T4 also features F-Log capture to maximize dynamic range, protecting highlights and shadows for editing. New to the X-T4 is F-Log View Assist which applies a gamma correction to the EVF and LCD, helping to visualize the end result.  Zebra warnings and focus peaking overlays as well as magnification during shooting are all features that video shooters will appreciate. Multiple custom white balance slots along with presets are easily accessible.   Key Camera Specifications 26MP BSI 'X-Trans CMOS 4' sensor In-body image stabilization up to 6.5 EV benefit 20 fps shooting with AF (15 fps with mechanical shutter) 3.68M-dot electronic viewfinder 10 bit 4:2:0 H.265 internal video capture (4:2:2 over HDMI) UHD/DCI 4K/60p from 1.18x crop region UHD/DCI 4K/30p using full width of sensor Internal F-Log capture Dual UHS-II SD card slots USB C-type connector can be used for charging battery New NP-W235 battery THE NAUTICAM NA-XT4 UNDERWATER HOUSING Nauticam has supported X-T1, X-T2, XH-1 and XT-3 cameras and continues to create innovative and ultra-functional housings for this line with the NA-XT4. More than just an updated badge, the NA-XT4 is redesigned and considerably smaller than its NA-XT3 predecessor.  The NA-XT4 features DSLR-style housing and port lock mechanisms as well as integrated ergonomic handles. The housing is designed with our Mission Control concept of placing the most important camera controls as close to the handles as possible to facilitate effortless and quick camera operation to ensure you don't miss the shot. The NA-XT4 features thumb levers near both handles, with the left thumb lever actuating the playback function and the right thumb lever the AF-ON control. The housing includes two M14 and one M24 bulkhead openings to accommodate a variety of accessories. The NA-XT4 uses the N100 Port System shared with the Fujifilm XH1 and XT3 system. A selection of port options are available for a variety of lenses. VIDEO RECORDING FEATURES The impressive video specs of the X-T4 prompted the addition of some video-centric features to the NA-XT4. The base of the housing can accept Nauticam's Mounting Ball Set for Tripod (PN 25218). As the X-T4 can output DCI/UHD 4K at 60p with 4:2:2 quality over HDMI, a new M24 bulkhead has been incorporated into the housing to support an HDMI 2.0 connection to the Nauticam Atomos Ninja V housing (HDMI 2.0) for Atomos Ninja V 5” 4Kp60 4:4:2 10-bit Recorder/Monitor/Player (NA17922).  An M24 Adaptor for HDMI 2.0 Cable (NA25086) is required when using the Nauticam Ninja V housing.   FLASH TRIGGERING Reliable automatic flash exposure is available with the NA-XT4 and a variety of optically fired flashes, precisely reproducing the Fujifilm EF-X8 flash at a proportionally greater intensity. This system yields accurate automatic TTL flash performance – even in manual exposure mode – with no electrical sync cables to flood! The NA-XT4 is also compatible with the Nauticam Mini Flash Trigger for Panasonic/Fujifilm (NA26305). The Flash Trigger allows for rapid fire manual flash firing via fiber optic, with no camera battery drain. The NA-XT4 comes fiber optic ready and accepts standard Sea & Sea style bushing connections. Nauticam Universal fiber optic cable system (NA26216) for Inon, Sea&Sea strobes, provide exceptional light transmission for accurate TTL performance. INTEGRATED VACUUM CHECK AND LEAK DETECTION SYSTEM The Nauticam vacuum check and leak detection system is pre-installed in the NA-XT4 as standard equipment. Combined with an optional M14 Vacuum Valve II (NA25624), this monitoring system provides constant updates throughout the dive as to watertight integrity of the housing via a multi-color LED on the rear of the housing.

The G7X Mark III camera continues to live up to the incredibly high standard set by its predecessor the G7X Mark II. Thanks to its overall image quality, snappy autofocus, excellent manual white balance, and useful built-in macro mode, this little camera makes a big impression. This feature set, paired with the most ergonomic, rugged, and easy to use underwater housing available forms a perfect underwater imaging combination. THE CANON G7X MARK III CAMERA Offering multimedia fluency within a compact design, the Canon PowerShot G7X Mark III is a sleek camera distinguished by its advanced sensor design and flexible imaging capabilities. Its 20.1MP 1" CMOS sensor uses a stacked design, which pairs with the DIGIC 8 image processor to realize especially fast focusing performance, full-resolution shooting at up to 20 fps, and UHD 4K30p video recording. Optically, the G7X Mark III houses a 4.2x zoom lens, which covers a 24-100mm equivalent focal length range for wide-angle to short-telephoto fields of view. An f/1.8-2.8 maximum aperture range suits working in difficult lighting conditions as does an Optical Image Stabilizer, which compensates for the effects of camera shake. The camera's slim design also incorporates a 3.0" 180° tilting touchscreen LCD and has both Bluetooth and Wi-Fi for wirelessly connecting to a mobile device. Key Camera Specifications 20.1MP 1"-type BSI CMOS sensor 24-100mm F1.8-F2.8 lens 3" tilting touchscreen LCD 30 fps continuous shooting at 8.8 MP resolution (RAW) 4k/30p 1080/60p video capture THE NAUTICAM NA-G7XIII HOUSING NA-G7XIII is the latest iteration in a lineup of advanced housings for very capable compact cameras supported by Nauticam. Many features found on professional DSLR systems have been integrated into this system, and the result is an underwater housing that allows the user to harness the full potential of this advanced compact camera in the water. The basic functions and ergonomic enhancements that Nauticam users have grown to know and love are incorporated in NA-G7XIII. The housing is machined from a solid block of aluminum, then hard anodized to seal out corrosive salt water. It is closed via a simple, yet secure locking rotary latch. The right side of the housing is sculpted to fit the palm of the user’s hand, and Nauticam’s two-stage shutter release lever provides clear differentiation between the half press and full press shutter release positions. All functions are clearly labeled. The Nauticam leak alarm and vacuum monitoring system is installed as standard equipment. This system provides an audible and visual alert to any water entry in the housing, and when combined with an accessory M14 Vacuum Valve (#25624) the watertight integrity of the system can be tested before ever entering the water and monitored during every dive. Expert product design, modern manufacturing techniques, top quality materials backed by a two-year warranty, and a critical focus on the user experience combine to produce the premier system for Canon Powershot G7X Mark III. The Nauticam NA-G7XMKIII. THE N50 PORT SYSTEM The NA-G7X Mark III ships with the “Standard” Port but other ports are available from the N50 system. Supplied with the housing, this port allows full zoom through and features a 67mm threaded front for attaching accessory macro lenses or a flip-adapter. This port is ideal for mid-range fish portraiture or close-up and macro work with add on wet-lenses. INTEGRATED VACUUM CHECK AND LEAK DETECTION SYSTEM The Nauticam vacuum check and leak detection system is shipped with NA-G7XMKIII as standard equipment. Combined with an accessory vacuum valve (PN 25624), this monitoring system provides constant updates on the watertight and safe-to-dive status of the housing. A simple color-coded LED lighting system lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur. The Nauticam system is temperature compensated, eliminating false alarms caused by a change in outside temperature, or from a camera heating up on an action-packed dive. OPTIONAL PRO PACKAGE CONFIGURATION The NA-G7XIII is also available in the Pro Package configuration that comes with the Flexitray II, Right Handle, two ball-mounts and M14 vacuum valve pre-installed. The standard NA-G7XIII ships with stainless steel stiffening brackets and shutter release extension should a Nauticam Easitray or Flexitray be added later. HDMI OUTPUT The G7X Mark III has HDMI output for video, allowing for the use of external monitors which make judging exposure, focus and composition easier than using the built-in LCD of the camera. Nauticam has included an m16 port on the NA-G7XIII to take advantage of HDMI connectivity. By adding the optional NA25028 Socket Extension and connection from HDMI bulkhead to camera) *2 *1 M16 extension ring is required, which is included in NA-058/502H/FHD5/502B-H monitor housing. *2 The pop-up flash needs to be in up position in order for the internal cable to work (flash up lever is disabled when using an external monitor)

THE SONY A6600 E-MOUNT APS-C CAMERA The Sony a6600 is the new flagship model of the venerable APS-C mirrorless line. The a6000 series benefits from a large lens selection and bright Electronic Viewfinder paired with a large 24.2MP Exmor CMOS sensor and high-powered latest generation BIONZ X processor in a compact travel-friendly package. For the a6600 Sony is adding a host of features that will benefit the underwater image maker whether shooting video or stills. Key Camera Specs 24.2 APS-C Exmor CMOS Sensor ISO Range of 100-32000 810 shot (CIPA standard) Battery 4K 30p HLG 100Mbps Video Recording Unlimited video record time IMPROVED PROCESSING Sony's 4D autofocus system provides ultra-fast 0.02s and accurate tracking autofocus, taking advantage of the camera's 425 phase-detection autofocus points. With 11fps continuous shooting the a6600 will insure sharp images of fast action scenes. With the new BIONZ X processor comes improved low-light performance and an expanded base ISO range of 100-32,000. With the a6600, when using Auto ISO mode, minimum and maximum ISO values can now be set. 4K VIDEO PERFORMANCE Combined with 5-axis optical image stabilization and HLG 4K 30p video recording, the A6600 is sure to be a video shooter favorite. The 4K footage from the a6500 is oversampled, using the full sensor-width at 24p and downsampling the final result which leads to increased sharpness. For 4K at 30p, the a6600 uses a 1.23x crop. When shooting high-speed FHD at 120p or 100p the footage is from a 1.14x crop. Sony also removed the 30-minute recording time limit restriction. Using the HLG Picture profile for video capture preserves the maximum dynamic range available, allowing for more latitude in post production. ENHANCED CUSTOMIZATION The a6600 has gained a well-placed 'C3' custom button in addition to the existing 'C1' and 'C2' which are located on the top of the housing. The new 'C3" is located on the rear of the housing within thumb's reach. The a6600, similar to its predecessors is greatly customizable to fit the shooter's needs. THE NAUTICAM NA-A6600 UNDERWATER HOUSING Nauticam is the industry leader in mirrorless interchangeable lens underwater camera support. Nauticam has housed more mirrorless cameras, and more Sony E (NEX) Mount cameras than any other housing manufacturer. This experience results in the most evolved housing line with broadest range of accessories available today. Pioneering optical accessories elevate performance to a new level. Magnifying viewfinders, the sharpest super macro accessory lenses ever made, and now the highest quality wet mount wide angle lens (the WWL-1) combine with the NA-A6600 housing to form a complete imaging system. Nauticam is known for ergonomics, and an unmatched experience. Key controls are placed at the photographer’s fingertips. The housing and accessories are light weight, and easy to assemble. The camera drops in without any control presetting, and lens port changes are effortless. NA-A6600 features an integrated handle system. This ergonomic style provides exceptional control access, even with thick gloves, with ideal placement of the shutter release and a thumb-lever to actuate the AE-L / AF-L button from the right handle in addition to the new 'C3' customizable button. Nauticam build quality is well known by underwater photographers around the globe. The housing is machined from a solid block of aluminum, then hard anodized making it impervious to salt water corrosion. Marine grade stainless and plastic parts complete the housing, and it is backed by a two year warranty against manufacturing defects. NOTE: The NA-A6600 is NOT compatible with (36206) N85 to N120 50mm Adapter. It requires the updated (36207) N85 to N120 50mm Port Adapter II. HDMI 1.4 OUTPUT With 4K HDR internal video recording and updated autofocus, pairing the NA-A6600 with an external monitor such as the SmallHD 502 Bright 5" gives video shooters a large, bright screen that features focus and exposure tools. HDMI 1.4 output requires HDMI Bulkhead (25032) as well as a supported monitor housing and internal HDMI cable (25076). WWL-1, CMC-1, AND CMC-2 Three in-house Nauticam optical designs, designed by founder and Managing Director Edward Lai, are the perfect lenses to complete an a6600 underwater system. The magic of the wet lenses is their tremendous versatility, paired with outstanding in-water performance. Both macro and super wide angle optics are available to the underwater photographer on the same dive. These lenses are completely engineered for use in water, providing the highest image quality available today in a wet mount optic. WWL-1 is a wide angle conversion lens, compatible with several lenses in the Sony system. The field of view is widest when paired with the Sigma 19mm f2.8 DN Lens, providing 130 degree diagonal field of view. WWL-1 is also an ideal match for the Sony E 16-50mm F3.5-5.6 PZ OSS lens providing over 100 degree diagonal field of view with full zoom through! With either lens on camera, class leading center sharpness, corner sharpness, and contrast result in the clearest wide angle images possible underwater. CMC-1 and CMC-2 provide the best macro performance available, with two different magnification strengths, suitable for a wide variety of macro subjects. With the popular Sony E 16-50mm F3.5-5.6 PZ OSS lens, CMC-1 is capable of capturing a macro frame 26mm wide, while CMC-2 captures an area 33mm wide. CMC-2 is less strong, making it easier to use with more accurate autofocus. CMC-1 is best suited for the smallest of macro subjects. Macro enthusiasts will surely want both! FAST AND RELIABLE FLASH TRIGGERING Reliable rapid fire manual flash triggering is available with the NA-A6600 for a variety of optically fired flashes when used with a new LED Flash Trigger (36315). The NA-A6600 comes fiber optic ready and accepts standard Sea & Sea style bushing connections. Strobes and light arms can be attached to the housing via included 1? accessory mounting balls. The housing also features a cold-shoe and M10 threaded mount for a focus light or other accessories. Electrical strobe triggering (with power set manually on the flash head) is still an option for those with an investment in legacy lighting gear, requiring the purchase of an accessory electrical bulkhead. BATTERY PACK FOR NA-6600 HOUSING (2500MAH, INC. USB CABLE) (NA36332) The a6600 does feature a larger internal battery but especially when shooting video the benefit of an accessory battery pack greatly extends the time between battery swaps, and allows the housing to remain sealed between dives. The accessory battery pack rests securely below the camera inside the housing and provides power to the camera via USB. INTEGRATED VACUUM CHECK AND LEAK DETECTION SYSTEM The Nauticam vacuum check and leak detection system is available with NA-A6600 as standard equipment. Combined with an optional vacuum valve (PN 25624), this monitoring system provides constant updates on the water tight and safe-to-dive status of the housing. A simple coded LED lighting system lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur.  

THE OLYMPUS OM-D E-M5 MARK III CAMERA Weighing in at under one pound, the E-M5 Mark III packs an outsized punch. The E-M5 Mark III is built around the same 20Mp Live MOS sensor and Dual F.A.S.T Autofocus system as the larger OM-D E-M1 Mark II. New for the Mark III is the addition of a 121-point hybrid AF system which, combined with the powerful TruePic VIII processor allows for 10fps burst mode capture with AF-C. The Mark III's EVF has been upgraded to an OLED display with 60fps refresh rate. The 5-axis in-body stabilization also receives an 0.5 stop bump to 5.5EV. The E-M5 Mark III also steps up in the video category with DCI 4K at 24p or stabilized UHD 4K at 30p using the full width of the sensor to maintain field-of-view. HDMI output supports the 1.4 standard with 8-bit 4:2:2 at up to 30p quality. Key Camera Specs 20MP Live MOS Four Thirds Sensor 121-point Hybrid AF System 10 fps burst shooting with AF-C DCI 4K/24p and UHD 4K/30p video HDMI Output 5.5EV of image stabilization (CIPA-rating) 2.36M-dot OLED EVF With the OM-D E-M5 Mark III, Olympus brings a host of features from their flagship Four Thirds models into an economical and compact package that is ideal for the traveling image maker. THE NAUTICAM NA-EM5III UNDERWATER HOUSING The OM-D E-M5 Mark III places the power of the E-M1 Mark II in a compact travel-friendly package and so does the NA-EM5III. Building on our strong lineup of mirrorless camera housings, the NA-EM5III is a feature-rich underwater imaging tool. Our Mission Control design philosophy insures that critical controls are clearly labeled and easy to access with intuitive placement. The NA-EM5III is built around the extensive N85 port system. Optimized port solutions for a wide variety of Micro Four Thirds lenses and access to our Underwater Corrective Optics makes the Nauticam NA-EM5III a superior image-making platform. Stainless steel stiffening brackets and a shutter release extension, which are compatible with the optional Easitray II or Flexitray II tray systems are included with the NA-EM5III. An M10 threaded accessory mounting point is also ready to accept the optional M10 strobe mounting ball for additional accessory mounting flexibility. HDMI CONNECTIVITY A forward M16 bulkhead can be used for the optional HDMI 1.4 Bulkhead for use with external monitor housings such as the NA-502 or NA-502B for the SmallHD 502 and 502 Bright monitors. See sidebar for recommended configurations. VIEWFINDER OPTIONS The E-M5 mark III has an upgraded OLED Electronic Viewfinder. A clear view for fine focus and composition is critical for successful underwater photography, and nothing beats a magnifying viewfinder. These viewfinders use distance, not closeup vision, and provide a large, clear view of the high resolution Olympus electronic viewfinder. Available in Angled 45º (PN 32205) and Straight 180º (PN 32204) formats, both viewfinders have external dioptric adjustments for dialing in perfect correction matched to the photographer’s eyesight. RAPID FIRE OPTICAL FLASH TRIGGERING The E-M5 Mark III camera with the included FL-LM3 flash is limited to 2-3 fps continuous shooting, even when a low manual power is selected in the camera flash menu. In situations where continuous optical shooting is required, Nauticam’s Mini Flash Trigger for Olympus (26306) can trigger external strobes over fiber optic at up to 10 frames per second! The trigger is powered by onboard coin style lithium batteries, with thousands of flashes available from a set. The NA-EM5III comes fiber optic ready and accepts standard Sea & Sea style bushing connections. Nauticam Universal Fiber Optic cables provide exceptional light transmission for accurate TTL performance. Electrical triggering of legacy wired strobe systems is possible via an electrical Nikonos style bulkhead (optional). INTEGRATED VACUUM CHECK AND LEAK DETECTION SYSTEM The Nauticam vacuum check and leak detection system is available with NA-EM5III as standard equipment. Combined with an optional vacuum valve (NA25624 or NA25625), this monitoring system provides constant updates on the water tight and safe-to-dive status of the housing. A simple coded LED lighting system lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur.

The Canon EOS R5 is attractive to underwater image makers for a variety of reasons. It is a 45MP full frame mirrorless camera that shoots full width 8K video, utilizes Canon's new RF lens mount, and also has next generation Dual Pixel autofocus. The Canon EOS R6 Camera The Canon EOS R6 is one of the latest in Canon's full-frame mirrorless camera lineup which has gained unprecedented demand.  It features the RF lens mount which has the same large 54mm diameter but the ability to have larger rear lens elements that are closer to the sensor gives increased corner and outer edge sharpness.  The R6 uses an 20MP CMOS sensor which is closely related to the one used in the Canon 1D X Mark III flagship camera.  It offers in-body image stabilization rated at up to 8 stops of correction.  The camera's Dual Pixel autofocus system uses 1053 autofocus points across the entire frame.   It is also capable of recording 4K video at up to 60p and 1080 at up to 120p.   The EOS R6 can also use the large EF-mount lens lineup via three optional adapters, a simple EF to R adapter, one which supports the customizable control ring and another that features a drop-in filter mount. Key Camera Specifications 20MP full-frame Dual Pixel CMOS sensor UHD 4K shooting up to 60p, 1080 at up to 120p, 10-bit 4:2:2 internal recording in C-Log or HDR PQ 100% coverage Dual Pixel II AF system 12 fps / 20 fps burst (mechanical / electronic shutter) 3.68M-dot EVF 1.62M-dot fully-articulated rear touchscreen 10-bit HDR photos in HEIF format Dual UHS-II SD slots The Nauticam Underwater Housing for the Canon EOS R6 Camera The NA-R6 underwater housing follows suit with Nauticam's drive for innovation. Both the Canon EOS R5 and EOS R6 present shooters with the ability to use both the available legacy EF lenses via an adapter in addition to their native RF optics.  To support both the legacy and native lenses, Nauticam has integrated the NA-R6 into the N120 port system. Canon's EF to RF mount adapters can be affixed to the camera before insertion into the housing. When using the EOS R6 inside the housing with the adapter and a supported EF lens, the port and extension ring arrangement will be identical to the same setup on a Nauticam Canon N120 DSLR. As the RF lens lineup emerges, dedicated port and extension ring combinations will be listed on the Port Chart. Two lens release buttons, one for RF and one for EF lenses used with the optional Canon adapter, are located on the front of the housing to make lens removal through the port opening simple. Mission Control Nauticam engineers are obsessed with getting the underwater image maker unfettered access to all the necessary controls, with as many within easy reach of the ergonomic rubberized handles. This Mission Control philosophy extends to the NA-R6 where a dual thumb lever and dual sub-lever are placed by the right handle. The upper thumb lever activates the "AF-On" and the lower the "Q" buttons while the sub-lever corresponds to the "M-Fn" and "Record" buttons. Near the left handle is a thumb lever for "Playback" as well as a dedicated switch to change from using LCD to the EVF. Large knurled and rubberized control dials access the camera's "main" and "sub" command dials. The two-stage trigger allows for smooth focus and firing activation. Additional buttons for "Menu", "Focus Point Selection" and others are also easily reached from the handles. An additional control wheel is located on the left side of the housing and will interface with the control ring on the supported EF to EOS R Mount Adapter with Control Ring using the optional gear (NA19561). Flash Triggering Flash triggering is achieved via one of two optional Flash Triggers, a manual LED trigger (NA26301) or a TTL Flash Trigger (NA26321) that use the built-in fiber optic bulkheads with optional fiber-optic cables to trigger supported strobes. For controlling strobes that do not support fiber optic flash triggering, a variety of legacy hot-shoe flash control bulkheads are available. Integrated Vacuum Check and Leak Detection System The Nauticam vacuum check and leak detection electronics are shipped with the NA-R6 as standard equipment. Combined with an accessory vacuum valve (NA25625) this monitoring system provides constant updates on the water tight and safe-to-dive status of the housing. A simple color coded LED lighting system lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur. The Nauticam system is temperature compensated, eliminating false alarms caused by a change in outside temperature, or from a camera heating up on an action packed dive.

With the GFX100S, Fujifilm has transferred the power of the larger medium-format GFX100 into a smaller camera body that is more in line with a standard mirrorless full-frame cameras while also making various performance improvements.  The GFX100S maintains the 102MP BSI CMOS sensor yet features a smaller and lighter in-body image stabilization system, autofocus points that cover virtually 100% of the image frame and is powered by the X-Processor 4 chip. THE FUJIFILM GFX100S CAMERA Fujifilm's mirrorless medium-format (44mm x33mm sensor size) GFX100S camera packs the expected large 102MP pixel count into a camera body more in-line with a full-frame mirrorless system.  Even while reducing overall camera size, the GFX100S receives a more capable in-body image stabilization (IBIS) system as well as supercharged autofocus driven by the latest X-Processor 4 chip.  Key Camera Specs 102MP BSI CMOS Sensor (44mm x 33mm) IBIS rated at 6EV 4K 30p video at up to 400Mbps with full-width readout Uncompressed 10-bit 4:2:2 or 16-but raw video output over HDMI Dual-gain ISO Up to 16-bit uncompressed raw files The GF-mount lens lineup continues to grow, with more and more lenses meeting the criteria underwater image-makers are after.  Paired with the camera's medium-format 102MP sensor, which is 68% larger than a full-frame sensor, the resulting images have lower noise and greater dynamic range for a given exposure value.  Users can choose to record up to 16-bit uncompressed raw image files, preserving the maximum amount of sensor data for post-processing. The GFX100S features the latest X-Processor 4 chip which powers the improved autofocus system that covers virtually 100% of the image area.  The camera's large built-in OLED viewfinder has 3.69M-dot resolution at 0.77x magnifications and features variable refresh rates and resolution to enhance battery life. Video from the GFX100S uses the full sensor width, preserving the original field-of-view of the lens and can be recorded internally as 4K 30p video with a bit-rate of up to 400Mbps.  Over HDMI the GFX100S can output either an uncompressed 16-bit raw or 10-bit 4:2:2 4K video signal, excellent news for those using external monitors/recorders such as the Atomos Ninja V.   With dedicated settings for both still or video modes, switching between shooting modes is quick and easy via a lever atop the camera.  The camera's "Q" menu can be customized to provide the most valuable information as either an overlay on the live-view representation or as the entire LCD area.   Example-Setup The Nauticam NA-GFX100S Underwater Housing  The NA-GFX100S is built with the singular focus of creating an underwater housing that blends ergonomic design, intuitive control placement and rugged field-tested durability.  The resulting machined aluminum housing can be further refined with the addition of accessories from magnifying viewfinders to external monitors/recorders.  To achieve the full benefit of the stunning 102MP resolution requires the use of underwater optics that are designed with high-resolution lenses in mind to deliver the highest optical quality possible.   Mission Control Design The NA-GFX100S is designed with our Mission Control philosophy which dictates placing controls where they are needed most, meaning no more missed shots fumbling for a control or dial.  The majority of exposure and focus controls are within easy reach of the ergonomic handles that feature stainless steel stiffening brackets to reduce any unwanted movement even when using large strobes or video lights.  A multi-direction pad on the upper right of the rear panel gives access to the camera's joystick.  A double lever near the right handle activates the 'AF-ON' and 'Q' controls.  Also on the right side are levers for Focus and View modes.  The left side has a double lever for 'PLAYBACK' and 'DISP' as as levers for turning the EF-X20 TTL flash on or off and one for the cameras 'V-Fn4' control.  On top of the housing is a lever for switching between 'STILL' and 'VIDEO' modes. Premium Professional Optics Built around the N120 Port System, the NA-GFX100S supports a variety of GF-mount lenses with a selection of optical-quality glass and acrylic ports as well as access to Nauticam's lineup of premium professional optics.  These optics are designed suing industrial lens design software to provide unparalleled optical quality and impressive fields-of-view.  The Wide-Angle Conversion Port 2 or WACP2, when used with the Laowa 17mm f/4 GFX Zero-D lens can achieve an impressive 140º FOV with an almost 0" minimum focus distance and incredible corner sharpness even at wider-open apertures such as f/5.6.   Flash Triggering Flash triggering is via the optional Fujifilm EF-X20 TTL flash and built-in fiber-optic bulkheads.  An option for electronic strobe connection without TTL is also possible using the optional M14 Nikonos bulkhead with universal hot-shoe.   HDMI Output The GFX100S can output high-quality uncompressed 4K video over HDMI and the NA-GFX100S is compatible the Nauticam HDMI 2.0 system via the front M24 bulkhead. Even when recording video internally, the use of an external monitor over either HDMI 1.4 or 2.0 is a great tool to help with composition or image review.  Vacuum Check and Leak Detection System The NA-GFX100S comes with the Nauticam vacuum check and leak detection system as standard equipment. This monitoring system, working in tandem with the pre-installed vacuum valve, provides constant updates on the water tight and safe-to-dive status of the housing. A simple color coded LED lighting system lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur. The Nauticam system is temperature compensated, eliminating false alarms caused by a change in outside temperature, or from a camera heating up on an action packed dive.  

This housing is fully compatible with the OM System OM-1 Mark II Camera. The OM Systems OM-1, the first high-end Micro Four Thirds mirrorless camera from OM Digital Solutions. The OM-1 features a 20MP quad-pixel AF stacked CMOS sensor.  It is paired with the latest TruePic X processor to deliver 3x faster processing speeds and is capable of 120 fps shooting with the electronic shutter. The O-M1 can also capture 4K UHD or DCI at 60p in the OM-Log profile for great color grading range. The OM-1 camera by Olympus OM Systems has announced the OM-1. The new camera is supposed to top all previous models and have the absolute "WOW factor". Autofocus, image stabiliser and processor are said to be convincingly better. It will be available from the beginning of March. The OM-1 is to be the new MFT flagship from Olymus. With its 20MP sensor, it is said to be capable of 120 frames/s at full resolution. It also has an extremely fast image sensor. OM System promises that subject tracking and autofocus tracking will be faster and better than ever before. But there's also been a big upgrade in the image stabiliser. Key Camera Specs 20MP Stacked CMOS Sensor 1053 X-type AF points Up to 120 fps with electronic shutter Image stabilization rated to 7EV of correction (up to 8EV with compatible lenses) Large 5.76M-dot OLED electronic viewfinder Dual UHS-II SD card slots UHD or DCI 4K/60p video, 1080 up to 240 fps Weather sealing rated to IP53 Olympus OM-1 underwater housing by Nauticam The OM Systems OM-1 is characterized by its combination of extreme customizability and impressive stabilization in a compact hybrid-shooting package. The Nauticam NA-OM1, similar to the OM-1 is a refinement of it's predecessors. Nauticam has produced housings for wide range of Micro Four Thirds cameras from Olympus and Panasonic. Throughout the evolution of Micro Four Thirds cameras, Nauticam has adapted our design to help image makers get take full advantage of every camera advancement. More than a simple waterproof case, the NA-OM1 integrates with the OM-1 to adapt and improve upon the camera's features for underwater shooting. MISSION CONTROL Regardless of where a dial or button may be found on the camera body, Nauticam engineers make sure it is located where it is needed most on the housing. This Mission Control philosophy drives the design of every housing and provides for the most intuitive and easy to use housings available. The NA-OM1 features a thumb lever, easily accessed from the ergonomic rubberized right handle that actuates the AF-ON control.  This back-button autofocus method prevents the camera from refocusing between shots, allowing the user fine control over a shot's focus and is critical whether shooting macro or fast moving wide-angle subjects. FLASH TRIGGERING The OM-1 can be used with the optional Olympus FL-LM3 flash inside the NA-OM1 underwater housing by Nauticam to provide accurate TTL flash triggering through the integrated Sea&Sea style fiber optic bulkheads. For high-speed manual flash triggering, the optional Mini Flash Trigger for Olympus (26306) can be used. The trigger is powered by onboard coin style lithium batteries, with thousands of flashes available from a set. Electrical triggering of legacy wired strobe systems is possible via an electrical Nikonos style bulkhead (optional). PREIUM PROFESSIONAL OPTICS A camera system is only as good as the optics placed in front of it. Nauticam's extensive line of dome and flat ports support a wide variety of Micro Four Thirds lenses. For even higher image quality and versatility, the NA-OM1 can be used in conjunction with Nauticam's lineup of Water Contact Optics. For example, with the Olympus 14-42mm f/3.5-5.6 EZ Lens, the Nauticam WWL-1 provides a full zoom through ultra wide-angle 130º field of view. MAGNIFYING VIEWFINDERS A clear view for fine focus and composition is critical for successful underwater photography, and nothing beats a magnifying viewfinder. These viewfinders use distance, not closeup vision, and provide a large, clear view of the high resolution Olympus electronic viewfinder. Available in Angled 45º (PN 32205 or 32213) and Straight 180º (PN 32204 or 32211) formats, both viewfinders have external dioptric adjustments for dialing in perfect correction matched to the photographer’s eyesight.  The Full Frame Angle Viewfinder 32°/ 1:1 (32213) or the Full Frame Straight Viewfinder 32°/ 1:1 (32211) requires the 32215 Viewfinder Collar Adaptor. INTEGRATED VACUUM CHECK AND LEAK DETECTION SYSTEM The Nauticam Vacuum check and leak detection system is available with NA-OM1 Underwater Housing as standard equipment. Combined with an optional vacuum valve (PN 25624), this monitoring system provides constant updates on the water tight and safe-to-dive status of the housing. A simple coded LED lighting system lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur.

The X-T5, Fujifilm's latest APS-C mirrorless hybrid camera, adds a list of significant upgrades when compared to its predecessors.  Some of the most noticeable improvements are a new 40.2MP sensor with a processor 2x as fast as the X-T4.  As still/video hybrids become more popular, Fuji is offering a high-resolution camera that can record internal 6.2K 10 bit 4:2:2 video or 12 bit ProRes RAW externally over HDMI in addition to shooting an impressive 20fps of continuous stills. FUJIFILM X-T5 Camera The Fujifilm X-T5 features an APS-C CMOS 4 X-Trans 5 HR BSI 40MP Sensor. The X-T5 is powered by a new X Processor 5 which provides extremely fast performance and improved responsiveness. Improved in-body stabilization delivers up to a 7EV benefit which is a significant benefit for video shooters.  The intelligent 425 point hybrid autofocus tracking system is now sensitive down to -7EV allowing it accurately focus in extreme low light conditions.   The X-T5 allows you to record oversampled 6.2K 30p or 4K 30p with a 1.23x crop factor or subsampled 4K 60p with the full width of the sensor.  When combined with the Atomos Ninja V, the X-T5 can output up to 6.2K 12 bit ProRes RAW.  Like the X-T4, the X-T5 also features HLG and F-Log capture to increase dynamic range, protecting highlights and shadows for editing. New to the X-T5 is F-Log2 which provides you with 13+ stops of dynamic range instead of just 12 stops with F-Log.  Key Camera Specifications 40MP APS-C X-Trans CMOS 5 HR BSI sensor In-body image stabilization up to 7 EV benefit 20 fps shooting with AF (15 fps with mechanical shutter) 3.69M-dot OLED electronic viewfinder 4K 60p, 6.2K 30p 4:2:2 10-Bit Videor Internal F-Log and F-Log2 capture Dual UHS-II SD card slots Two-axis tilt rear screen THE NAUTICAM NA-XT5 UNDERWATER HOUSING Nauticam has supported all the previous X-T cameras and continues to create innovative and ultra-functional housings for this line with the NA-XT5 underwater housing.  The NA-XT5 features DSLR-style housing and port lock mechanisms as well as integrated ergonomic handles. The housing is designed with our Mission Control concept of placing the most important camera controls as close to the handles as possible to facilitate effortless and quick camera operation to ensure you don't miss the shot. The NA-XT5 features thumb levers near both handles, with the left thumb lever actuating the playback function and the right thumb lever the AF-ON control. The housing includes two M14 and one M24 bulkhead openings to accommodate a variety of accessories. The NA-XT5 uses the N100 Port System shared with the Fujifilm XH1, XT3 and XT4 system. A selection of port options are available for a variety of lenses. PREMIUM PROFESSIONAL OPTICS Nauticam's wide range of ports and in-house corrective optics are the perfect compliment to the NA-XT5's inherent flexibility. Built around the N100 Port System, the NA-XT5 supports a wide variety of X-mount lenses. In addition, there are several options available to use the groundbreaking WACP-1 and WACP-C wide-angle corrective lenses as well as the more compact and in-water removable WWL-1B and WWL-C. For example, with the Fuji XF 18-55mm f/2.8-4 R LM OIS lens, the WACP-1 brings the original 75º field-of-view to an impressive 130º with sharper corners, an ~0" minimum focus distance and a more natural looking image than would be provided by a standard glass dome port.  For complete water contact lens compatibility, you can view the port chart here.   HDMI 2.0 A large bore M24 bulkhead is located at the front of the housing for use with HDMI 2.0 or HDMI 1.4 (with a step-down adapter to M16) external monitors and recorders.  The X-T5 can output up to 6.2K 12 bit ProRes RAW over HDMI 2.0.  See the resources sidebar for additional details and recommended setups. FLASH TRIGGERING Reliable automatic flash exposure is available with the NA-XT5 and a variety of optically fired flashes, precisely reproducing the Fujifilm EF-X8 flash at a proportionally greater intensity. This system yields accurate automatic TTL flash performance – even in manual exposure mode – with no electrical sync cables to flood! The NA-XT5 is also compatible with the Nauticam Mini Flash Trigger for Panasonic/Fujifilm (PN 26305). The Flash Trigger allows for rapid fire manual flash firing via fiber optic, with no camera battery drain. The NA-XT5 comes fiber optic ready and accepts standard Sea & Sea style bushing connections. Nauticam Universal fiber optic cable system (PN 26216) for Inon, Sea&Sea strobes, provide exceptional light transmission for accurate TTL performance. External Battery Pack The NA-XT5 housing supports the use of an USB-C battery pack in order to greatly extend the time between battery swaps, and allowing the housing to remain sealed between dives.  The battery compartment at the bottom of the housing supports batteries up to 150mm(W) x 18mm (H) x 72mm (D).  Here is a known compatible battery with more to come: Anker USB-C Portable Charger 10000mAh with 20W Power Delivery, 523 Power Bank (PowerCore 10K).  (180min of additional run time) 25303 USB-C to USB-C Right Angled Cable (in 0.5m length) is recommended for use with USB-C battery packs.   INTEGRATED VACUUM CHECK AND LEAK DETECTION SYSTEM The Nauticam vacuum check and leak detection system is pre-installed in the NA-XT5 as standard equipment. Combined with an optional M14 Vacuum Valve II (PN 25624), this monitoring system provides constant updates throughout the dive as to watertight integrity of the housing via a multi-color LED on the rear of the housing.

Many underwater imaging enthusiasts have been anxious to move beyond the limited performance of their compact camera systems but have been reluctant to give up the compact form factor and simplicity of the genre. Other world travelers have started wondering if there is a way to downsize from their DSLR without giving up too much performance. Nauticam has been listening to this increasing interest and their industry leading engineers have responded with the new NA-R50. The mission statement was clear: Design the most compact and friendly housing possible for Canon’s awarding-winning and remarkably compact EOS R50 mirrorless APS-C camera. The added challenge was making the housing just as simple and straight forward as Nauticam’s legendary compact camera housings, while making it even easier to achieve superior imaging results. The resulting housing represents an entirely new category for Nauticam while maintaining their famous ergonomics and Quality. NAUTICAM NA-R50 UNDERWATER HOUSING FOR THE CANON EOS R50 CAMERA Nauticam has always been at the forefront of underwater housing technology. They consistently push the boundaries to create evolutionary, and sometimes revolutionary, products to make imaging creation easier. The NA-R50 Underwater housing is no exception, integrating everything that makes Nauticam's range of housings a favorite among underwater photographers into a small and lightweight package. The new innovative system is engineered around the Canon RF-S 18-45 F4.5-6.3 IS STM Lens, since this is by far the most versatile and practical RF lens to use on the Canon RF APS-C format underwater. The port is thus integral to housing and requires no additional maintenance, much like Nauticam’s compact camera systems. This lens provides excellent results in the wide to narrow fish portrait FOV range but is easily married to Nauticam’s superb WWL-1 or WWL-C for exceptionally sharp wide angle coverage with full zoom through while still keeping a modest form factor. Nauticam’s Compact Macro Converter water contact optics can be added for a full “do anything and go anywhere” system that easily fits in a traveler's carry on. Constructed from rugged aluminum, the NA-R50 housing is not only lighter but also more compact than any previous Canon APS-C system. It's the perfect choice for photographers who want to capture stunning images and videos with best-in-the-industry auto focus, while enjoying the convenience of minimal bulk and maintenance. The housing comes ready to submerge as even the zoom gear is included. Add the R50 camera and RFS 18-45 and you are ready to shoot. COMPACT AND VERSATILE The NA-R50 underwater housing dimensions are small enough to hand hold without a tray for ultimate freedom if it is required. Measuring just 238mm (9.3in) wide, 150mm (5.9in) in height and 115mm (4.5) in depth. The NA-R50 has an incredibly small footprint compared to previous APS-C camera housings, making it extremely apealing and travel-friendly. WHICH WET LENSES SHOULD I PAIR WITH THE NA-R50? Nauticam has become justifiably famous for their groundbreaking optical designs for underwater. These optics have been a particular passion of Nauticam founder and Managing Director Edward Lai, and several options offer exceptional performance with the NA-R50 underwater system. The magic of the wet lenses is their tremendous versatility, paired with outstanding in-water performance. Both macro and super wide angle interchangeable optics can be available to the underwater photographer on the same dive. A sampling of recommended options are below. The WWL-1B is a wide angle conversion lens that is an excellent match with the Canon  RF-S 18-45 F4.5-6.3 IS STM Lens. The WWL-1B provides a crispy 130 degree diagonal field of view with the lens at 18mm and allows for full zoom through to about 60 degrees at 45mm. Focus down-to-the-glass performance is available at all focal lengths for amazing close focus wide angle capability. The all glass WWL-1B lens provides sharper over-all performance then any wide angle lens behind a dome on a typical system. For those wishing for an even smaller wide angle option without any loss of quality, Nauticam's WWL-C provides a compact all glass optic every bit as sharp as the WWL-1B, but with a zoom range offering 116 degrees at 18mm zooming to about 52 degrees at 45mm. Of course, it also focuses to the front optic.  Macro aficionados have options as well. Nauticam strongly recommends the lightweight CMC-1 & CMC-2 lenses for ultimate image quality and better auto-focus performance. Maximum magnification is achieved at a focal length of 45mm. The CMC-1 offers more magnification but is a bit more challenging. CMC-2 still offers a hefty 0.6X magnification but is a bit more forgiving. FLASH TRIGGERING With the NA-R50 underwater housing, flash triggering is accomplished by utilizing the Canon EOS R50’s pop-up flash making adding strobes that employ fiber optic connections a seamless integration. Strobes that provide STTL capability with fiber optics will provide the option of full TTL compatibility with the R50. INTEGRATED VACUUM CHECK AND LEAK DETECTION SYSTEM The Nauticam vacuum check and leak detection electronics are shipped with the NA-R50 as standard equipment. Combined with an accessory M16 vacuum valve (25625) this monitoring system provides constant updates on the water tight and safe-to-dive status of the housing. A simple color coded LED lighting system lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur. The Nauticam system is temperature compensated, eliminating false alarms caused by a change in outside temperature, or from a camera heating up on an action packed dive.

With the NA-R50 underwater housing, Nauticam introduces its latest innovation, underlining its commitment to pioneering new products with innovative design. The Canon NA-R50 ProPackage consists of: NA-R50 underwater housing from Nauticam Handle plate with 1-inch ball plugs. Fixing for handle plate outlet extension Vacuum valve with hand pump Large padded carrying bag The Canon EOS R50 camera Many underwater photographers wanted to leave the limited performance of their compact camera systems behind, but were reluctant to give up the compact size advantage and simplicity of this system. Other world travellers wonder if there is a way to downsize their DSLR without giving up too much performance. Nauticam has listened to this growing interest and its industry-leading engineers have responded with the new NA-R50. The brief was clear: to create the most compact and friendly housing possible for Canon's award-winning and remarkably compact EOS R50 mirrorless APS-C camera. The additional challenge was to make the housing as simple and straightforward as Nauticam's legendary compact camera housings, while making it even easier to achieve outstanding image results. The resulting housing represents a whole new category for Nauticam, while retaining its renowned ergonomics and quality. Important camera specifications 24.2-megapixel CMOS sensor (APS-C) 4K movie recording without crop at up to 30 frames per second, oversampled from 6K Dual Pixel CMOS AF II Movie für close-up demo mode Electronic first curtain (12 fps) and electronic shutter (15 fps) for continuous shooting Advanced A+ Assist with expanded range of auto-compatible scenes. Longer than 30 minutes of video recording UVC/UAC compatibility for webcams and streaming The Nauticam underwater housing for the Canon EOS R50 Nauticam has always been at the forefront of underwater gear technology. They üre always pushing the boundaries to develop evolutionary and sometimes revolutionary products that make image making easier. The NA-R50 underwater camera is no exception. It combines everything that makes the Nauticam range of housings a favourite among underwater photographers in a small and lightweight design. The new, innovative system allows you to capture images with ease. The new innovative system has been designed around the Canon RF-S 18-45 F4.5-6.3 IS STM lens, as this lens is by far the most versatile and practical RF lens that can be used underwater with the Canon RF APS-C format. The mount is therefore integrated into the housing and requires no additional maintenance, similar to the Nauticam compact camera systems. This lens delivers excellent results in wide to narrow fish portraits, but can easily be combined with Nauticam's excellent WWL-1 or WWL-C to achieve exceptionally sharp wide-angle coverage with full zoom, while maintaining the modest form factor. Nauticam's Compact Macro Converter with water contact optics can be added for a complete system that does it all and can be taken anywhere, fitting easily into a traveller's hand luggage. Made from sturdy aluminium, the NA-R50 body is not only lighter but also more compact than any previous Canon APS-C system. It is the perfect choice for photographers who want to capture stunning images and video with the industry's best autofocus, while enjoying the convenience of minimal bulk and maintenance. The housing comes ready to dive, as even the zoom accessory is included. Add the R50 camera and the RFS 18-45 and you are ready to shoot. Compact and versatile The dimensions of the NA-R50 underwater camera are so small that it can be handheld without a mount for maximum freedom when needed. It measures only 238 mm in width, 150 mm in height and 115 mm in depth. Compared to earlier APS-C camera bodies, the NA-R50 has an incredibly small footprint, which makes it appealing and travel-friendly. Which attachment lens to combine with the NA-R50? Nauticam has become justly famous for its pioneering underwater optical designs. These optics are a particular passion of Nauticam founder and managing director Edward Lai, and the various options offer exceptional performance with the NA-R50 underwater system. The magic of wet lenses lies in their enormous versatility, coupled with outstanding underwater performance. Both macro and super wide-angle interchangeable lenses can be available to the underwater photographer on the same dive. Below you will find a selection of the recommended options. The WWL-1Bis a wide-angle converter that is an excellent match for the Canon RF-S 18-45 F4.5-6.3 IS STM lens. The WWL-1B offers a razor-sharp 130-degree diagonal field of view at 18mm and allows full zoom up to 60 degrees at 45mm. Focusing down to the glass is possible at all focal lengths and provides an amazing wide-angle capability at close range. The all-glass WWL-1B lens offers a sharper overall performance than any wide-angle lens behind a dome on a conventional system. For those who want an even smaller wide-angle option without sacrificing quality, Nauticam offers the WWL-C, a compact all-glass lens that is just as sharp as the WWL-1B but offers a zoom range of 116 degrees at 18mm to about 52 degrees at 45mm. Of course, it also focuses on the front optics. Macro lovers also have a choice. Nauticam recommends the lightweight CMC-1. and CMC-2 lenses for the highest image quality and better autofocus performance. Maximum magnification is achieved at a focal length of 45 mm. The CMC-1 offers more magnification, but is a little more demanding. The CMC-2 still offers a strong 0.6x magnification, but is a little more tolerant.   Flash release The NA-R50 underwater housing uses the pop-up flash of the Canon EOS R50 to provide seamless integration with fibre-optic flashes. Flashes that offer sTTL capability with fibre optics offer the possibility of full TTL compatibility with the R50. Integrated vacuum test and leak detection system The Nauticam vacuum inspection and leak detection electronics are supplied as standard with the NA-R50. Combined with the included M16 vacuum valve, this monitoring system provides constant, up-to-date information on the watertight and submersible condition of the housing. A simple colour-coded LED light system indicates to the user that the vacuum is stable or that the case is losing vacuum. Leak detection is integrated into the same circuitry so that an audible and visual signal is emitted when water is ingressing. The Nauticam system is temperature compensated, so false alarms due to changes in external temperature or camera heating during an action-packed dive are avoided.