Mini Flash Trigger for Olympus

Compared to the previous OM-D E-M1, and all other Olympus Micro Four Thirds cameras, the E-M1 II is an improvement in every way. The new 20MP Live MOS sensor provides a useful bump in resolution. Dual quad core processors combine to allow 60 fps burst shooting (18 fps with autofocus). An incredibly advanced autofocus system (121 focus points covering 75-80% of the frame) grabs subjects instantly without hunting, and doesn’t let go when tracking. THE OLYMPUS OM-D EM1 MARK II It takes more than just headline grabbing specs on paper to make a great underwater camera system, and the E-M1 Mark II does many of the less obvious things right. The “2×2” dial and button structure doubles the functionality of the control dials and assignable push buttons. Typically these dials control shutter speed and aperture when shooting in manual mode, but with a flick of the 2×2 lever they are reassigned to other parameters (like ISO and Exposure Compensation, as an example). The control dials provide the easiest way to access frequently used camera settings directly, and Olympus has doubled their usefulness! It seems to be a trend among camera makers to sacrifice battery life and handling in an effort to to reduce overall size. Olympus didn’t make this mistake with E-M1 Mark II. The substantial hand grip provides exceptional handling, even with larger lenses, and makes space to accommodate a large battery that offers an exceptional 440 shots per charge (based on the CIPA rating, and many more are likely in real world use). Also new, and notable, is a high bitrate UHD (4K) video recording mode coupled with very capable image stabilization. The camera offers HDMI output to an external monitor, providing an upgraded display for framing, exposure check, and focus confirmation. KEY CAMERA SPECIFICATIONS 20MP Live MOS sensor 5-axis in-body image stabilization system 121-pt hybrid AF system 60 fps burst shooting (18 fps with continuous AF, 10 fps with flash) Fully articulating 3? LCD display High-res electronic viewfinder Cinema (DCI) and UHD 4K video 50MP High-Res Shot mode Weather-sealed body USB 3 (Type-C) THE NA-EM1II UNDERWATER HOUSING BY NAUTICAM A camera of this caliber deserves an exceptional underwater housing. Five and a half years ago, Nauticam entered the Micro Four Thirds underwater housing segment. 17 housing models later, Nauticam is proud to have produced more mirrorless underwater camera housings than any other manufacturer. The Nauticam NA-EM1II isn’t a new design, it is a refinement of the housings that have come previously. The system is field tested, and underwater photographer approved. The housing is small, but not at the expense of functionality or ergonomics. Integrated handles provide a sturdy and comfortable base to operate the system from. An ergonomic shutter release lever, thumb lever for AE-L / AF-L, and well placed control dials provide the same operational feel as any Nauticam DSLR housing. Control buttons are placed within easy reach of the handles, with sufficient spacing to allow easy operation, even by feel. The ergonomic experience of this system is clearly influenced by Nauticam DSLR systems, with class leading control access and feel. More than just good looking, this is a rugged housing, ready to tackle thousands of hours of underwater abuse. Crafted from solid aircraft aluminum, the housing can reach depths of 100m with ease. The secure single rotating housing latch opens the housing back. The camera drops in easily. The rear mounted housing o-ring makes maintenance simple. Dual fiber optic synch ports are standard and take advantage of the camera included FL-LM3 flash for strobe triggering. To make the most of the E-M1 Mark II’s excellent electronic view finder (EVF), Nauticam allows for installation of the acclaimed 45º and 180º magnified viewfinders, providing the ultimate in composition and focus ability. The NA-EM1II is a professional grade underwater housing, supporting the pro-level E-M1 II camera body to its full potential. PREMIUM PROFESSIONAL OPTICS It’s all about the glass, and lenses are the key to terrific photography. This has always been a strength of Olympus systems, and the lineup is now stronger than ever thanks to the Nauticam Wet Wide Lens (WWL-1). WWL-1, paired with an Olympus 14-42mm f/3.5-5.6 EZ Lens or ED 12-50mm F3.5-6.3 EZ*, provides a full zoom through ultra wide angle field of view. In our tests, this combination exceeds the corner sharpness and clarity of even very good micro four thirds wide angle lenses behind dome ports. WWL-1 will focus on its front element for unmatched close focus wide angle performance, and full zoom through means you can zoom to crop in camera for tighter framing. WWL-1 is mounted via a quick change bayonet system that allows fast and easy one handed mounting and removal. An optional lens caddy provides a place to park the WWL-1 lens when not in use. For closeup and macro work, the Nauticam Compact Macro Converter (CMC-1, PN 81301) allows images smaller than 1? wide to be captured. Ultra wide, mid-range and macro imaging capability, all on the same dive! There are many more options for the underwater photographer, including any of the several 14-42mm options, the Panasonic Lumix G X VARIO 12-35mm F2.8 ASPH. POWER O.I.S., Olympus M.ZUIKO DIGITAL ED 12-40mm f/2.8 PRO, Panasonic Lumix G Vario 12-32mm f/3.5-5.6 ASPH, Panasonic Lumix G 14mm F2.5 ASPH, and the Leica DG Macro Elmarit 45mm F2.8 ASPH. *12-50 is usable with WWL-1 from approximately 15.5mm – 50mm with WWL-1. VIEWFINDER OPTIONS  A clear view for fine focus and composition is critical for successful underwater photography, and nothing beats a magnifying viewfinder. These viewfinders use distance, not closeup vision, and provide a large, clear view of the high resolution Olympus electronic viewfinder. Available in Angled 45º (PN 32205) and Straight 180º (PN 32204) formats, both viewfinders have external dioptric adjustments for dialing in perfect correction matched to the photographer’s eyesight. INTEGRATED VACUUM CHECK AND LEAK DETECTION SYSTEM The Nauticam vacuum check and leak detection system is available with NA-EM1II as standard equipment. Combined with an optional vacuum valve (PN 25624), this monitoring system provides constant updates on the water tight and safe-to-dive status of the housing. A simple coded LED lighting system lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur. FLASH CONNECTORS FOR OPTICAL TTL Reliable automatic flash exposure is available with the NA-EM1II and a variety of optically fired flashes. The Inon Z-240, D-2000, S-2000, and Sea & Sea YS-D1/YS-D2 strobes provide automated lighting, precisely reproducing the camera’s FL-LM3 flash at a proportionally greater intensity. This system yields accurate automatic TTL flash performance – even in manual exposure mode – with no electrical sync cables to flood! The NA-EM1II comes fiber optic ready and accepts standard Sea & Sea style bushing connections. Nauticam Fiber Optic cables, available for both Inon and Sea & Sea strobes, provide exceptional light transmission for accurate TTL Performance. RAPID FIRE OPTICAL TRIGGERING The E-M1 Mark II camera with FL-LM3 flash is limited to 2-3 fps continuous shooting, even when a low manual power is selected in the camera flash menu. In situations where continuous optical shooting is required, Nauticam’s Mini Flash Trigger (26306) can trigger external strobes over fiber optic at up to 10 frames per second! The trigger is powered by onboard coin style lithium batteries, with thousands of flashes available from a set. Electrical triggering of legacy wired strobe systems is possible via an electrical Nikonos style bulkhead (optional).

Nauticam begnügt sich einfach nicht damit, sich auf früheren Erfolgen wie dem renommierten NA-EM5 auszuruhen. Angesichts der großen Anzahl von dicht gepackten Bedienelementen an der Kamera stellte das E-M1-Gehäuse an sich eine Herausforderung dar. Die Designer und Ingenieure von Nauticam wollten sich dieser Herausforderung nicht nur stellen, sondern auch die Mensch-Maschine-Schnittstelle einen Schritt weiter entwickeln und sich nicht darauf konzentrieren, das Gehäuse leichter zu machen, sondern auch die Bedienung des Gehäuses zu erleichtern. Ein Beispiel ist das neue integrierte Griffsystem; mit Blick auf den Profi-Fotografen ist dieses Gehäuse so konzipiert, dass es mit der Hand am Griff verwendet werden kann, wie es von Nauticam SLR-Gehäusen bekannt ist. Das Ergebnis ist ein Gehäuse, das leichter zu halten und stabiler ist und leichter zu bedienen ist. Eines der Markenzeichen von Nauticam-Gehäusen war schon immer das sichere Port-Verriegelungssystem, das einzigartig ist, da es ein internes Bajonettsystem verwendet. Die Spiegelreflexgehäuse von Nauticam sind seit jeher mit einem roten Verriegelungshebel ausgestattet, der zum Symbol für die Innovation von Nauticam geworden ist. Diese berühmte Steuerung ist nun in die spiegellose Welt eingegangen und macht Portwechsel schneller, einfacher und ebenso sicherer. Die wichtigsten Bedienelemente für die Aufnahme sind alle mit der rechten Hand leicht zugänglich und erfordern nur sehr wenig Fingerbewegung. Da praktisch alle Bedienelemente dieser Kamera programmierbar sind, kann der Fotograf genau anpassen, wie das Rigg auf die Berührung reagiert. Nehmen Sie auf, ändern Sie die Blende, nehmen Sie auf, ändern Sie die Verschlusszeit, wechseln Sie zu Video, ändern Sie die Verschlusszeit, starten Sie die Aufnahme, ändern Sie die ISO - alles leicht zugänglich, und das alles ohne große Reichweiten, die zu verschwommenen Bildern, Fehlbildern und verwackelten Videos führen können.

Dieses Gehäuse entspricht seinem Vorgänger NA-EM5: Hochgradig konfigurierbar durch das separate Griffdesign. Dieses Design ermöglicht es dem Benutzer, die Griffe unabhängig voneinander zu konfigurieren. Eine sehr beliebte Option ist es, das Gehäuse mit einem einzigen linken Griff (Flexitray oder Easitray) auszustatten, begleitet von einer Handschlaufe auf der rechten Seite. Dies hilft, das Rigg so klein wie möglich zu machen, mit dem Komfort und der Sicherheit einer Handschlaufe.  Die mühelose (aber sichere), einzeln drehbare Gehäuseverriegelung öffnet den Gehäuseboden. Die Kamera lässt sich leicht einbauen, ohne dass die Bedienelemente voreingestellt werden müssen. Zwei faseroptische Synchronisationsanschlüsse sind Standard und nutzen die Vorteile des Olympus-Zubehörblitzes. Um das Beste aus dem exzellenten elektronischen Sucher (EVF) des E-M5 herauszuholen, hat Nauticam ein optionales hinteres Acrylglasfenster entwickelt, das eine Halterung für die Installation der beliebten 45º und 180º vergrößernden Sucher von Nauticam beinhaltet und somit die ultimative Komposition und Fokussierbarkeit bietet. Ergonomie Wie bei allen Nauticam-Gehäusen wird besonderes Augenmerk auf die Ergonomie gelegt. Tasten und Zifferblätter sind leicht zugänglich und erfordern nur eine minimale Reichweite. Die Haupt- und Subskalen von Olympus sind mit Daumen oder Zeigefinger leicht zugänglich, ohne dass Sie beim Einstellen von Blende und Verschlusszeit den Griff am Gehäuse lösen müssen. Die wichtigen Tasten Fn1 und Fn2 sind ebenso leicht erreichbar und können für eine Vielzahl von Funktionen programmiert werden. Einige der nützlichen Einstellungen sind AF-Sperre, One-Touch-Weißabgleich, manueller Fokus, ISO und Belichtungskorrektur. Die Umschaltung zwischen NS und EVF ist ein Kinderspiel, und durch kurzes Drücken der Info-Taste kann das neue NS-Super-Bedienfeld von Olympus auf dem OLED-Bildschirm ein- oder ausgeblendet werden, um schnellen Zugriff auf viele wichtige Einstellungen zu erhalten. Das Betriebsarten-Einstellrad kann leicht durch den typischen P, A, S, M, Movie-Modus und einige "einfache Aufnahmemodi" gedreht werden. Die Bedienelemente müssen ein richtiges "Gefühl" vermitteln, und der patentierte zweistufige Hebelverschluss von Nauticam ermöglicht eine natürliche, präzise Fokussierung und Aktivierung des Auslösers. Jedes der Features des neuen NA-EM5 wurde mit den gleichen engen Toleranzen wie die der inzwischen berühmten DSLR-Gehäuselinie von Nauticam entwickelt. Diese Qualität wird sich sicherlich in jedem Bild widerspiegeln, das mit diesem außergewöhnlich leistungsstarken Bildgebungssystem aufgenommen wird.  Hochwertige professionelle Optik Das Micro-4/3-System unterstützt eine große Auswahl an hochwertigen Objektiven von Olympus und Panasonic (in Zusammenarbeit mit Leica), und es kommen zunehmend Objektive von Drittanbietern von Sigma zum Einsatz. Es gibt mehrere Objektive, die unter Wasser extrem gut funktionieren (und das zu einem vernünftigen Preis!). Einige Beispiele: Olympus M.ZUIKO DIGITAL ED 12-50mm F3.5-6.3 EZ: Der ultimative Alleskönner, dieses Objektiv deckt einen sehr nutzbaren mittleren Bereich ab und verfügt über einen einzigartigen Makro-Modus. Fotografieren Sie Delfine und Nacktschnecken im selben Tauchgang! Panasonic Lumix G Fisheye 8mm/F3,5: Dieses 180º Fisheye-Objektiv fokussiert nah und ist gestochen scharf. In Kombination mit einem kleinen Port gibt es keine bessere CFWA (Close Focus Wide Angle) Option auf dem Planeten. Olympus M.ZUIKO DIGITAL ED 60mm f/2.8 Makro: Dies ist ein ideales Makroobjektiv für m4/3, und durch das Hinzufügen der Nauticam CMC wird es zu einem Supermakromonster. Stellen Sie sich vor, Sie füllen die gesamte Breite des Rahmens mit etwas nur 8 mm "Großem"! Panasonic Lumix G Vario 7-14mm f/4.0 ASPH: Das 7-14mm ist ein geradliniges Objektiv, ideal für die Aufnahme von Menschen oder Haien oder Wracks.... Objekte, bei denen die Fisheyeverzerrung nicht erwünscht ist. Am breiten Ende ist dieses Objektiv 114º breit, ideal, um in die Nähe von Objekten zu gelangen und die Menge des dazwischen liegenden Wassers zu reduzieren. Aber ein Zoom geht bis zu 75º - ideal, um das etwas schüchterner erscheinende Motiv zu erreichen. Die sehr ähnliche Olympus M.Zuiko Digital ED 9-18mm f/4.0-5.6 kann die gleiche Basisrolle bei geringeren Kosten erfüllen. M.ZUIKO DIGITAL ED 8mm 1:1.8 PRO und M.ZUIKO DIGITAL ED 7-14mm 1:2.8 PRO bieten eine verbesserte Leistung bei schnellerer maximaler Öffnung und werden vollständig vom Nauticam-Portsystem unterstützt. Es gibt viele weitere Optionen für den Unterwasserfotografen, einschließlich einer der mehreren 14-42mm Optionen, der Panasonic Lumix G X VARIO 12-35mm F2.8 ASPH. POWER O.I.S., Olympus M.ZUIKO DIGITAL ED 12-40mm f/2.8 PRO, Panasonic Lumix G Vario 12-32mm f/3.5-5.6 ASPH, Panasonic Lumix G 14mm F2.5 ASPH und das Leica DG Makro Elmarit 45mm F2.8 ASPH. Sucheroptionen Nauticam Sucher sind in den Formaten 45º Winkel und 180º Gerade erhältlich und verfügen beide über externe dioptrische Einstellungen, die perfekt auf das Sehvermögen des Fotografen abgestimmt sind. 

The Olympus OM-D E-M1 Mark III, the latest iteration of the ground-breaking Micro Four Thirds camera brings improvements from the larger E-M1X to the more compact E-M1 form factor. The Mark III features a a 20MP Four Thirds sensor that is paired with the latest TruePic IX processor from the E-M1X to deliver even more autofocus and stabilization horsepower to the already impressive E-M1 system. The E-M1 Mark III can also capture 4K UHD at 30p in the OM-Log profile with excellent autofocus performance. The Olympus OM-D E M1 Mark III The OM-D E-M1 has always stood out from the competition with platform leading image stabilization and the option for exceptional control customization.  The Mark III features the latest TruePic IX processor that is also found on the pro-level E-M1X.  The TruePic IX helps the Mark III deliver exceptional autofocus performance and fast continuous capture of up to 60fps.  The Dual F.A.S.T autofocus system uses a combination of Contrast and Phase Detection autofocus to insure reliable continuous autofocus across a wide range of ambient lighting conditions. The Mark III, similar to the Mark II can capture UHD 4K video at up to 30p leveraging the impressive sensor stabilization and autofocus to generate ultra-sharp buttery-smooth handheld video.  DCI 4K is also possible at 24p with a high 237Mbps bit rate. Key Camera Specs 20MP Four Thirds sensor 121-point autofocus system with TruePic IX Processor Up to 60 fps Raw + JPEG capture Image stabilization rated at 7.0 (CIPA standard), up to 7.5EV with 'Sync IS' lenses Large 2.36M-dot LCD viewfinder able to work at up to 120 fps 420 shots per charge (CIPA) battery life rating Dual SD card slots (1x UHS-I, 1x UHS-II) UHD 4K/30p video and DCI 24p at up to 237Mbps Extensive, IPX1-rated weather sealing With this latest update, the OM-D E-M1 Mark III becomes an even more capable hybrid shooter, combining excellent video and still features in a reliable and portable IPX1 rated platform.   Nauticam NA-EM1III Underwater Housing The Olympus OM-D E-M1 is characterized by its combination of extreme customizability and impressive stabilization in a compact hybrid-shooting package.  The Nauticam NA-EM1III, similar to the E-M1 Mark III is a refinement of it's predecessors. Nauticam has produced housings for wide range of Olympus cameras from the compact Tough TG series to the PEN and OM-D lines.  Throughout the evolution of Olympus' cameras, Nauticam has adapted our design to help image makers get take full advantage of every camera advancement.  More than a simple waterproof case, the NA-EM1III integrates with the EM-1 Mark III to adapt and improve upon the camera's features for underwater shooting. Misson Control Regardless of where a dial or button may be found on the camera body, Nauticam engineers make sure it is located where it is needed most on the housing.  This Mission Control philosophy drives the design of every housing and provides for the most intuitive and easy to use housings available.  The NA-EM1III features a thumb lever, easily accessed from the ergonomic rubberized right handle that actuates the customizable AEL/AFL control.  Typically, for underwater use, this control is assigned to trigger momentary autofocus.  This back-button autofocus method prevents the camera from refocusing between shots, allowing the user fine control over a shot's focus and is critical whether shooting macro or fast moving wide-angle subjects. Flash Triggering The OM-D EM-1 Mark III can be used with the optional Olympus FL-LM3 flash inside the NA-EM1III to provide accurate TTL flash triggering through the integrated Sea&Sea style fiber optic bulkheads.  For high-speed manual flash triggering, the optional Mini Flash Trigger for Olympus (26306) can be used.  The trigger is powered by onboard coin style lithium batteries, with thousands of flashes available from a set.  Electrical triggering of legacy wired strobe systems is possible via an electrical Nikonos style bulkhead (optional). Premium Professional Optics A camera system is only as good as the optics placed in front of it.  Nauticam's extensive line of dome and flat ports support a wide variety of Micro Four Thirds lenses.  For even higher image quality and versatility, the NA-EM1III can be used in conjunction with Nauticam's lineup of Water Contact Optics.  For example, with the Olympus 14-42mm f/3.5-5.6 EZ Lens or ED 12-50mm F3.5-6.3 EZ*, the Nauticam WWL-1 provides a full zoom through ultra wide-angle 130º field of view.  Magnifying Viewfinders A clear view for fine focus and composition is critical for successful underwater photography, and nothing beats a magnifying viewfinder. These viewfinders use distance, not closeup vision, and provide a large, clear view of the high resolution Olympus electronic viewfinder. Available in Angled 45º (PN 32205) and Straight 180º (PN 32204) formats, both viewfinders have external dioptric adjustments for dialing in perfect correction matched to the photographer's eyesight. Integrated Vacuum Check and Leak Detection System The Nauticam vacuum check and leak detection system is available with NA-EM1III as standard equipment. Combined with an optional vacuum valve (PN 25624), this monitoring system provides constant updates on the water tight and safe-to-dive status of the housing. A simple coded LED lighting system lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur.

THE OLYMPUS OM-D E-M5 MARK III CAMERA Weighing in at under one pound, the E-M5 Mark III packs an outsized punch. The E-M5 Mark III is built around the same 20Mp Live MOS sensor and Dual F.A.S.T Autofocus system as the larger OM-D E-M1 Mark II. New for the Mark III is the addition of a 121-point hybrid AF system which, combined with the powerful TruePic VIII processor allows for 10fps burst mode capture with AF-C. The Mark III's EVF has been upgraded to an OLED display with 60fps refresh rate. The 5-axis in-body stabilization also receives an 0.5 stop bump to 5.5EV. The E-M5 Mark III also steps up in the video category with DCI 4K at 24p or stabilized UHD 4K at 30p using the full width of the sensor to maintain field-of-view. HDMI output supports the 1.4 standard with 8-bit 4:2:2 at up to 30p quality. Key Camera Specs 20MP Live MOS Four Thirds Sensor 121-point Hybrid AF System 10 fps burst shooting with AF-C DCI 4K/24p and UHD 4K/30p video HDMI Output 5.5EV of image stabilization (CIPA-rating) 2.36M-dot OLED EVF With the OM-D E-M5 Mark III, Olympus brings a host of features from their flagship Four Thirds models into an economical and compact package that is ideal for the traveling image maker. THE NAUTICAM NA-EM5III UNDERWATER HOUSING The OM-D E-M5 Mark III places the power of the E-M1 Mark II in a compact travel-friendly package and so does the NA-EM5III. Building on our strong lineup of mirrorless camera housings, the NA-EM5III is a feature-rich underwater imaging tool. Our Mission Control design philosophy insures that critical controls are clearly labeled and easy to access with intuitive placement. The NA-EM5III is built around the extensive N85 port system. Optimized port solutions for a wide variety of Micro Four Thirds lenses and access to our Underwater Corrective Optics makes the Nauticam NA-EM5III a superior image-making platform. Stainless steel stiffening brackets and a shutter release extension, which are compatible with the optional Easitray II or Flexitray II tray systems are included with the NA-EM5III. An M10 threaded accessory mounting point is also ready to accept the optional M10 strobe mounting ball for additional accessory mounting flexibility. HDMI CONNECTIVITY A forward M16 bulkhead can be used for the optional HDMI 1.4 Bulkhead for use with external monitor housings such as the NA-502 or NA-502B for the SmallHD 502 and 502 Bright monitors. See sidebar for recommended configurations. VIEWFINDER OPTIONS The E-M5 mark III has an upgraded OLED Electronic Viewfinder. A clear view for fine focus and composition is critical for successful underwater photography, and nothing beats a magnifying viewfinder. These viewfinders use distance, not closeup vision, and provide a large, clear view of the high resolution Olympus electronic viewfinder. Available in Angled 45º (PN 32205) and Straight 180º (PN 32204) formats, both viewfinders have external dioptric adjustments for dialing in perfect correction matched to the photographer’s eyesight. RAPID FIRE OPTICAL FLASH TRIGGERING The E-M5 Mark III camera with the included FL-LM3 flash is limited to 2-3 fps continuous shooting, even when a low manual power is selected in the camera flash menu. In situations where continuous optical shooting is required, Nauticam’s Mini Flash Trigger for Olympus (26306) can trigger external strobes over fiber optic at up to 10 frames per second! The trigger is powered by onboard coin style lithium batteries, with thousands of flashes available from a set. The NA-EM5III comes fiber optic ready and accepts standard Sea & Sea style bushing connections. Nauticam Universal Fiber Optic cables provide exceptional light transmission for accurate TTL performance. Electrical triggering of legacy wired strobe systems is possible via an electrical Nikonos style bulkhead (optional). INTEGRATED VACUUM CHECK AND LEAK DETECTION SYSTEM The Nauticam vacuum check and leak detection system is available with NA-EM5III as standard equipment. Combined with an optional vacuum valve (NA25624 or NA25625), this monitoring system provides constant updates on the water tight and safe-to-dive status of the housing. A simple coded LED lighting system lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur.

This housing is fully compatible with the OM System OM-1 Mark II Camera. The OM Systems OM-1, the first high-end Micro Four Thirds mirrorless camera from OM Digital Solutions. The OM-1 features a 20MP quad-pixel AF stacked CMOS sensor.  It is paired with the latest TruePic X processor to deliver 3x faster processing speeds and is capable of 120 fps shooting with the electronic shutter. The O-M1 can also capture 4K UHD or DCI at 60p in the OM-Log profile for great color grading range. The OM-1 camera by Olympus OM Systems has announced the OM-1. The new camera is supposed to top all previous models and have the absolute "WOW factor". Autofocus, image stabiliser and processor are said to be convincingly better. It will be available from the beginning of March. The OM-1 is to be the new MFT flagship from Olymus. With its 20MP sensor, it is said to be capable of 120 frames/s at full resolution. It also has an extremely fast image sensor. OM System promises that subject tracking and autofocus tracking will be faster and better than ever before. But there's also been a big upgrade in the image stabiliser. Key Camera Specs 20MP Stacked CMOS Sensor 1053 X-type AF points Up to 120 fps with electronic shutter Image stabilization rated to 7EV of correction (up to 8EV with compatible lenses) Large 5.76M-dot OLED electronic viewfinder Dual UHS-II SD card slots UHD or DCI 4K/60p video, 1080 up to 240 fps Weather sealing rated to IP53 Olympus OM-1 underwater housing by Nauticam The OM Systems OM-1 is characterized by its combination of extreme customizability and impressive stabilization in a compact hybrid-shooting package. The Nauticam NA-OM1, similar to the OM-1 is a refinement of it's predecessors. Nauticam has produced housings for wide range of Micro Four Thirds cameras from Olympus and Panasonic. Throughout the evolution of Micro Four Thirds cameras, Nauticam has adapted our design to help image makers get take full advantage of every camera advancement. More than a simple waterproof case, the NA-OM1 integrates with the OM-1 to adapt and improve upon the camera's features for underwater shooting. MISSION CONTROL Regardless of where a dial or button may be found on the camera body, Nauticam engineers make sure it is located where it is needed most on the housing. This Mission Control philosophy drives the design of every housing and provides for the most intuitive and easy to use housings available. The NA-OM1 features a thumb lever, easily accessed from the ergonomic rubberized right handle that actuates the AF-ON control.  This back-button autofocus method prevents the camera from refocusing between shots, allowing the user fine control over a shot's focus and is critical whether shooting macro or fast moving wide-angle subjects. FLASH TRIGGERING The OM-1 can be used with the optional Olympus FL-LM3 flash inside the NA-OM1 underwater housing by Nauticam to provide accurate TTL flash triggering through the integrated Sea&Sea style fiber optic bulkheads. For high-speed manual flash triggering, the optional Mini Flash Trigger for Olympus (26306) can be used. The trigger is powered by onboard coin style lithium batteries, with thousands of flashes available from a set. Electrical triggering of legacy wired strobe systems is possible via an electrical Nikonos style bulkhead (optional). PREIUM PROFESSIONAL OPTICS A camera system is only as good as the optics placed in front of it. Nauticam's extensive line of dome and flat ports support a wide variety of Micro Four Thirds lenses. For even higher image quality and versatility, the NA-OM1 can be used in conjunction with Nauticam's lineup of Water Contact Optics. For example, with the Olympus 14-42mm f/3.5-5.6 EZ Lens, the Nauticam WWL-1 provides a full zoom through ultra wide-angle 130º field of view. MAGNIFYING VIEWFINDERS A clear view for fine focus and composition is critical for successful underwater photography, and nothing beats a magnifying viewfinder. These viewfinders use distance, not closeup vision, and provide a large, clear view of the high resolution Olympus electronic viewfinder. Available in Angled 45º (PN 32205 or 32213) and Straight 180º (PN 32204 or 32211) formats, both viewfinders have external dioptric adjustments for dialing in perfect correction matched to the photographer’s eyesight.  The Full Frame Angle Viewfinder 32°/ 1:1 (32213) or the Full Frame Straight Viewfinder 32°/ 1:1 (32211) requires the 32215 Viewfinder Collar Adaptor. INTEGRATED VACUUM CHECK AND LEAK DETECTION SYSTEM The Nauticam Vacuum check and leak detection system is available with NA-OM1 Underwater Housing as standard equipment. Combined with an optional vacuum valve (PN 25624), this monitoring system provides constant updates on the water tight and safe-to-dive status of the housing. A simple coded LED lighting system lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur.