Mini Flash Trigger for Sony

The long awaited Sony a7S III brings high frame-rate 4K video with incredible low-light sensitivity to the A7 full frame mirrorless lineup. The video-centric follow up to the a7S II adds internal 10-bit 4:2:2 4K capture at up to 120fps while building on the a7S II's already segment leading low-light capabilities. Upgrades also extend to the 9.44M dot OLED viewfinder, 759-point phase detection autofocus and reduced rolling shutter. THE SONY ALPHA  A7S III CAMERA Built around a new 12.1MP Exmor RS BSI CMOS sensor coupled with a BIONZ XR image processor, the a7S III is a powerful video oriented mirrorless full-frame camera. The long awaited follow up to the a7 SII, which set the standard for low-light capabilities in the full-frame mirrorless segment, brings not only improvements to that key spec but also a host of other notable upgrades. Key Camera Specs 12.1MP Exmor RS BSI CMOS sensor ISO sensitivity of 40-409600 4K Video Capture at up to 120fps Internal recording at up to 10-bit 4:2:2 color sampling No recording time limit 16-bit raw video output over HDMI-A 759-Point phase-detection autofocus with 92% coverage Dual UHS-II card slots S-Log2/3 or HLG/BT.2020 gamma curves 5.5 Stop IBIS The new sensor features 759 phase-detection and 425 contrast-detection autofocus points that cover approximately 92% of the image area and promises sensitivity down to -6 EV. Customizable seven-step AF transition speed and five-step AF subject shift sensitivity allows for fine tuning of the autofocus system. As expected, ISO sensitivity is expanded to ISO 40-409600. A 5-axis in-body stabilization system provides 5.5 stops of camera movement, even with adapted lenses, which combined with the 120fps frame-rates help deliver ultra-smooth handheld video. Video can be recorded in either All-I XAVC S-I at up to 600Mbps or XAVC HS which uses H.265 compression for smaller file sizes. Internal 4K recording uses 1:1 pixel readout at up to 120fps with 10-bit 4:2:2 sampling. The a7S III offers extensive color customization including the S-Log2 and S-Log3 gamma curves that can deliver 15+ stops of dynamic range. HLG and BT.2020 color spaces are also available. Recording time limits have been removed and improved heat dissipation has been added to the camera body's design. Internal recording is to UHS-II rated dual card slots that support CFexpress Type A or SD cards. External recording of 16-bit raw video is possible via the full size HDMI port when used with compatible Recorders. NAUTICAM NA-A7SIII UNDERWATER HOUSING Nauticam is the leader in producing intuitively designed precision manufactured aluminum underwater housings for the Sony a7 camera line and continues to innovate with the new NA-A7SIII housing.  The NA-A7SIII is designed to maximize the video-centric capabilities of the Sony a7S III camera while maintaining it's strong still image potential.  The NA-A7SIII is built around the N100 port system that is shared with the rest of the Nauticam housing lineup for the Sony full-frame mirrorless a7 series.  The N100 system includes a dull range of both macro and wide-angle ports as well as delivering access to the lineup of Nauticam's professional wet optics that are optimized for underwater imaging such as the WACP-1/2 and the SMC-1/2 lenses.  These optics deliver unparalleled image quality underwater expanding what is possible with the powerful a7S III camera. HDMI Output The a7S III can output 16-bit raw video signal over HDMI and the NA-A7SIII features an M24 bulkhead that supports the HDMI 2.0 standard.  This allows the NA-A7SIII to be used in conjunction with either a recording monitor such as the Atomos Ninja V in the NA-NinjaV housing  via HDMI 2.0 or standalone monitors such as the SmallHD 502 Bright in the NA-502B housings via HDMI 1.4.   Optional Magnifying Viewfinder The a7S III camera features an updated 9.44M-dot OLED viewfinder with a 120fps refresh rate.  Nauticam's line of optional magnifying viewfinders, available in both an angled 45º (32203) or straight 180º (NA32201) configuration provide enhanced viewing ability as well as a dioptric adjustment knob that can used underwater.  Installation can be achieved without tools in less than a minute.   Mission Control Nauticam engineer's Mission Control design philosophy means controls are intuitively placed where they are needed most regardless of their position on the camera.  The NA-A7SIII features a double thumb lever within easy reach of the right handle that triggers the AF-ON and RECORD controls of the camera.  A thumb lever on the left side toggles the PLAYBACK button.  The back panel of the housing provides access to all other rear camera controls including a multidirectional pad. Vacuum Check and Leak Detection System The Nauticam vacuum check and leak detection system is shipped with NA-A7SIII as standard equipment. With the addition of the optional M14 Vacuum Valve (NA25624) this monitoring system provides constant updates on the water tight and safe-to-dive status of the housing. A simple color coded LED lighting system lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur. The Nauticam system is temperature compensated, eliminating false alarms caused by a change in outside temperature, or from a camera heating up on an action packed dive.

Sony has been at the forefront of the mirrorless evolution, offering cameras with specifications that are truly geared towards meeting the disparate needs of today's image makers while maintaining a similar, if not almost identical form factor. With the a7R IV, Sony introduced the highest resolution full frame mirrorless camera to date and with the a9 II it took speed image quality to another level. Luckily, for those wishing to take their cameras underwater, the a7R IV and the a9 II have extremely similar body size and control placement. For this reason, Nauticam is offering the NA-a2020 housing that offer full support for both cameras in the same housing without modification. THE SONY A7R IV AND SONY A9 II CAMERAS While both the a7R IV and the a9 II feature the same size sensor and body, they are two very different cameras. With the NA-a2020 Underwater Housing, you now can choose the right camera for the job while using the same housing, lenses and ports. Both cameras share 5-axis in-body stabilization (IBIS) providing up to 5.5 stops of stabilization and the ability to record 4K video either from the full sensor width or a Super35 crop at up to 30p to dual UHS-II SD card slots. Both cameras are capable of clean HDMI video output up to UHD 4K 4:2:2 8-bit at up to 25p. THE SONY A7R IV CAMERA The Sony a7R IV is the company's fourth generation, high-resolution full-frame mirrorless camera. The 61.0-megapixel full-frame Exmor R CMOS sensor combined with BIONZ X imaging engine delivers unprecedented resolution, fine gradation, and low noise. Relative to previous generations, it promises more robust build quality, refined controls, the company's latest autofocus. The a7R IV also received a serious upgrade from a7R III to its electronic viewfinder (EVF) in a 1.6x bump in resolution to an impressive 5.76-million-dots of UXGA OLED display, the highest of any mirrorless full-frame camera. Sony Alpha a7R IV Key Specifications 61MP BSI CMOS full-frame sensor Fast Hybrid AF with tracking 10 fps burst shooting (12-bit Raw mode) with AF Tracking 5.76M dot OLED viewfinder 4K video from full sensor width (sub-sampled) or oversampled from Super35 crop S-Log 2, S-Log 3 and 'HLG' video modes (8-bit only) THE SONY A9 II CAMERA The a9 II is the flagship full-frame mirrorless camera in Sony's lineup and features a 24.2MP Exmor RS BSI CMOS sensor. The original a9 set the bar for high speed shooting with an incredible 20fps without EVF blackout, a trait passed on to the a9 II. It's 693 phase-detection pints cover over 93% of the sensor's surface which, combined with the BIONZ X processor leads to fast and accurate autofocus, even while tracking. Placing only 24.2 megapixels on the sensor, the a9 II prioritizes dynamic range and excellent low-light sensitivity over resolution. Sony Alpha a9 II Key Specifications 24.2MP BSI CMOS full-frame sensor 20fps continuous shooting without EVF blackout Fast Hybrid AF with Tracking 3.69M dot OLED viewfinder 4K video from full sensor width (sub-sampled) or oversampled from Super35 crop THE NAUTICAM NA-?2020 UNDERWATER HOUSING Nauticam has supported the Sony Alpha full-frame line since the original a7 with professional grade aluminum housings that offer intuitive access to all the controls and functions of the cameras. As the cameras have evolved, so have the Nauticam housings. The Nauticam NA-a2020 takes our commitment to the Sony full-frame mirrorless line to another level by delivering the first housing that will support both the a9 II and the a7R II with full access to all controls without modification or restriction. Integrated DSLR-housing styled handles with ergonomic rubberized grips and stainless steel stiffening brackets add stability and accessory mounting points. The NA-a2020 also features dual rear thumb-levers that are easily reached from the handle that access three of the most-used controls on the rear of the camera. The right lever actuates the AF-ON and RECORD buttons while the left lever is mapped to the PLAY button. Atop the housing on the left side are controls specific to the a9II in the form of a MODE dial and FOCUS mode lever. The C1, C2 buttons as well as the EV compensation dial also have direct access from the top of the housing. The C3, which is typically assigned to control switching between the EVF and the LCD screen is easily reachable on the rear of the housing from the left handle. ACCESSORY PORTS The NA-a2020 has both and M24 port at the front of the housing for both HDMI 1.4 and HDMI 2.0 connectivity (see sidebar for recommendations) as well as an M14 at the rear for the optional Vacuum Valve (25624). The housing comes with electronics pre-installed for Nauticam's Vacuum Check and Leak Detection system. This monitoring system provides constant updates on the water tight and safe-to-dive status of the housing. A simple color coded LED lighting system lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur. The Nauticam system is temperature compensated, eliminating false alarms caused by a change in outside temperature, or from a camera heating up on an action packed dive. PREMIUM PROFESSIONAL OPTICS Nauticam's wide range of ports and in-house corrective optics are the perfect compliment to the NA-a2020's inherent flexibility. Built around the N100 Port System, the NA-a2020 supports a wide variety of Sony FE mount lenses, as well as EF mount lenses via adapters. In addition, there are several options available to use the groundbreaking WACP and WACP-2 wide-angle corrective lenses as well as the more compact and in-water removable WWL-1. For example, With the Sony SEL1635GM FE 16-35mm F2.8 GM, the WACP 2 brings the original 105º field-of-view to an impressive 128º with sharper corners, an ~0" minimum focus distance and a more natural looking image than would be provided by a standard glass dome port. FLASH TRIGGERING Both fiber-optic and electrical strobe triggering options are available. The Nauticam Universal Fiber Optical cables attach to the built-in bulkheads atop the housing and feature modular connections for both Sea&Sea-style bushings and INON threaded connections. Triggering is achieved using the optional Nauticam Mini Flash Trigger for Sony (26302) which uses LEDs powered by an on-board coin-cell battery to generate a manual signal that is transmitter via the optical cables to compatible strobes.

Sony's latest full frame mirrorless camera, the a7C offers the underwater image maker one of the most compact and travel friendly full frame systems available on the market today.  The a7C features Sony's latest stellar autofocus and a much improved battery life thanks to its use of the larger Z series battery. The BIONZ X processor delivers superb low-light performance and faster image processing. For video shooters, the a7C features internal UHD 4K capture in the wide-dynamic range HLG image profile at up to 30p. THE SONY A7C FULL FRAME CAMERA The 24MP Sony a7C is Sony's newest and smallest full frame camera.  It resembles a body size closer to the APS-C sensor Sony a6600, yet offers the same hybrid, real-time tracking autofocus system as the higher-end alpha models from Sony.  It offers 5-axis image stabilization and can shoot bursts up to 10fps with auto focus.   Key Camera Specs 24MP BSI CMOS full frame sensor "Real-time tracking" AF System Oversampled 4K video up to 30p (1.2x crop), including 8-bit S-Log and HLG Continuous shooting up 10fps 3.0" 921.6k-Dot Vari-Angle Touchscreen 2.36m-Dot OLED Electronic Viewfinder 5-Axis In-Body Image Stabilization Large 'Z-type' battery, rated to 740 shots per charge While the a7C shares a great deal in common with the a7 III, the biggest standout difference is the size.  According to Sony, the a7C is the world's smallest full frame interchangeable lens camera with in body stabilization.  Not only is it much smaller, but the a7C also gained Sony's latest auto focus technology making this a clear competitor in the compact mirrorless market.  Along with the a7C, Sony also introduced the compact FE 28-60mm f/4-5.6 lens which is fully compatible with both the Nauticam WWL-1 and WACP-1.     THE NAUTICAM NA-A7C UNDERWATER HOUSING Nauticam is the industry leader in mirrorless interchangeable lens underwater camera support. Nauticam has housed more mirrorless cameras, and more Sony E Mount cameras than any other housing manufacturer. This experience results in the most evolved housing line with broadest range of accessories available today. Pioneering optical accessories elevate performance to a new level. Magnifying viewfinders, the sharpest super macro accessory lenses ever made, and now the highest quality water contact wide angle lenses (the WWL-1 and WACP-1) combine with the NA-A7C housing to form a complete imaging system. Nauticam is known for ergonomics, and an unmatched experience. Key controls are placed at the photographer’s fingertips. The housing and accessories are light weight, and easy to assemble. The camera drops in without any control presetting, and lens port changes are effortless. NA-A7C features an integrated handle system. This ergonomic style provides exceptional control access, even with thick gloves, with ideal placement of the shutter release and a thumb-lever to actuate the AF-ON button from the right handle. Nauticam build quality is well known by underwater photographers around the globe. The housing is machined from a solid block of aluminum, then hard anodized making it impervious to salt water corrosion. Marine grade stainless and plastic parts complete the housing, and it is backed by a two year warranty against manufacturing defects. PREMIUM OPTICS Several in-house Nauticam optical designs, designed by founder and Managing Director Edward Lai, are the perfect lenses to pair with an a7C underwater system. The magic of the water contact lenses is their tremendous versatility, paired with outstanding in-water performance. Both macro and super wide angle optics are available to the underwater photographer on the same dive. These lenses are completely engineered for use in water, providing the highest image quality available today in a water contact optic.  While there are many options, we'll focus on the most compact and versatile setup to match the travel friendly size of the a7C.   WWL-1 is a wide angle conversion lens, compatible with the Sony FE 28-60mm f/4-5.6 lens, providing 130 degree diagonal field of view with full zoom through! The WWL-1 offers class leading center sharpness, corner sharpness, and contrast resulting in some of the best wide angle images possible underwater. CMC-1 and CMC-2 provide the best macro performance for the Sony FE 28-60mm f/4-5.6 lens, with two different magnification strengths, suitable for a wide variety of macro subjects.  CMC-2 is less strong, making it easier to use with more accurate autofocus. CMC-1 is best suited for the smallest of macro subjects. Macro enthusiasts will surely want both! FAST AND RELIABLE FLASH TRIGGERING Reliable rapid fire manual flash triggering is available with the NA-A7C for a variety of optically fired flashes when used with the LED Flash Trigger (NA26302). The NA-A7C comes fiber optic ready and accepts the Universal Fiber Optic Cable (NA26216). Strobes and light arms can be attached to the housing via included 1″ accessory mounting balls.  Electrical strobe triggering is still an option for those with an investment in legacy lighting gear, requiring the purchase of an accessory electrical bulkhead (NA25056). INTEGRATED VACUUM CHECK AND LEAK DETECTION SYSTEM The Nauticam vacuum check and leak detection system is available with NA-A7C as standard equipment. Combined with an optional vacuum valve (PN 25624), this monitoring system provides constant updates on the water tight and safe-to-dive status of the housing. A simple coded LED lighting system lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur.

It's been three years since the release of the Sony α7III full-frame mirrorless camera and the followup α7IV delivers many of the new features we've seen in other models packaged into this true hybrid imaging system.  A new high-resolution 33MP BSI sensor powered by the BIONZ XR processor delivers 4k60p internal capture without crop in 4:2:2 10-bit 600Mbps quality or 30p downsampled from the full 7K sensor width.  Paired with massively improved autofocus, 15+ stops of dynamic range and new Active Mode 5-axis stabilization makes this a powerful high resolution photo and video platform worthy of the α7 badging. THE SONY ALPHA 7 IV Camera The Sony α7 line of full-frame mirrorless cameras has long been at the forefront of offering a variety of models with similar form factor that are geared towards different shooting styles.  With the α7 RIII and RIV, the focus was on low-light video-centric and ultra high resolution respectively while the α7IV marries the two to create a true hybrid shooting platform.  The Exmor R backside-illuminated 33MP full-frame sensor delivers high resolution still photos while leveraging the large sensor size to provide ultra-sharp and color-rich video downsampled from the full 7K sensor width. Camera Specs 33MP full-frame Exmor R™ BSI CMOS sensor with BIONZ XR™ processor 4K 60p 10-bit 4:2:2 video without crop 4K 30p 10-bit 4:2:2 downsampled from full sensor width 7K w/o pixel binning Real-time Eye-AF for humans and animals S-Log3 gamma for maximum Dyanmic Range capture 5-axis in-body image stabilization AUTOFOCUS The α7IV's improved autofocus system borrows heavily from Sony's other α series releases of late using their Fast Hybrid AF system which combines phase-detection and contrast-detection to provide fast and accurate focus.  The AF area is expanded to cover almost 94% of the frame with 759 AF-points.  Sony's latest Real Time Tracking and Eye AF modes promise to provide both accurate focus tracking for stills and video.  A new Focus Map feature allows for easier visualization of depth of field when filming. to help insure the critical parts of your subject are sharp. 4K VIDEO 4K 60p video captured with 10-bit 4:2:2 quality at up yo 600Mbps without crop sets the α7IV squarely with its peers in video capabilities.  Adding in the option to capture 30p downsampled from the full 7K sensor width gives the user the option to choose the right mode for their shooting style.  Capturing video in the S-Log3 gamma profile gives access to the camera's full 15+ stops of dynamic range for increased latitude in post processing. IMPROVED CONTROLS In addition to upgrading the autofocus, video and still capture  capabilities of the camera, the α7IV also now has the option to maintain discrete settings for video and still modes.  The dedicated dial atop the camera makes switching between modes hassle free.  The menu system has also been upgraded to make navigation easier and more similar to other recent models. NAUTICAM NA-A7IV UNDERWATER HOUSING The NA-A7IV underwater housing by Nauticam is designed as an optimized solution for both underwater still and moving image capture.  Outfitted with Nauticam's extensive lineup of accessories, the NA-A7IV can be customized to excel in either role.  The latest in a long lineup of Sony mirrorless system housings, the NA-A7IV features the same intuitively placed controls, easy setup, and rugged reliability user's have come to expect. MISSION CONTROL Never miss a shot looking for a button or dial.  Regardless of where the control may be found on the camera, Nauticam engineers have placed that control on the housing where it is needed most.  Essential dials and buttons are within easy reach of the reinforced ergonomic handles.  Atop the housing, a new dedicated lever allows quick switching between Still, Movie and S&Q (VFR Video) modes.  A dual thumb lever near the right handle actuates the REC and AF-ON buttons and a single lever near the left handle is for PLAYBACK.   HDMI 2.0 A large bore M24 bulkhead is located at the front of the housing for use with HDMI 2.0 or HDMI 1.4 (with a step-down adapter to M16) external monitors and recorders.  An additional M10 threaded mounting position near the front center of the housing also makes using an external monitor even easier.  The A7IV can output 4:2:2 10-bit 4K at up to 60fps to external recorders allowing for recording in edit-friendly codecs such as ProRes.  See the resources sidebar for additional details and recommended setups. PREMIUM PROFESSIONAL OPTICS Built around the N100 Port System for Sony E-Mount, the NA-A7IV can support a wide variety of native lenses with a selection of Optical Glass and Acrylic ports.  When used with an E-Mount to EF-mount lens adapter and an N100 to N120 adapter (see Resources sidebar for supported adapters), the NA-A7IV can be used with the Canon N120 EF-Mount port system, expanding the capabilities of the system even further.  Going beyond conventional optics the NA-A7IV can leverage the unparalleled optical quality of Nauticam's Water Contact optics such as the WACP-1 which offers up to 130º field-of-view, full zoom through, an almost 0" minimum focus distance with supported lenses.  For macro, the SMC-1 and SMC-2 deliver tack-sharp super-macro magnification levels up to 4x with the Sony 90mm macro lens. VACUUM CHECK AND LEAK DETECTION The housing comes with electronics pre-installed for Nauticam's Vacuum Check and Leak Detection system, requiring only the optional M14 Vacuum Valve (25624). This monitoring system provides constant updates on the water tight and safe-to-dive status of the housing. A simple color coded LED lighting system lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur. The Nauticam system is temperature compensated, eliminating false alarms caused by a change in outside temperature, or from a camera heating up on an action packed dive. STROBE TRIGGERING Triggering of external strobes is accomplished via the integrated fiber-optic bulkheads when using the optional Mini Flash Trigger for Sony (26302).  Electronic triggering is also via an optional Nikonos Bulkhead.  Note that when using this with the Vacuum Valve will require the optional M14 Offset Connector with Vacuum Valve II (25026).

Aimed squarely at professional image makers, the Sony Alpha 1 provides a 50MP sensor capable of 30fps burst shooting and 8K video.  It features Sony's latest autofocus system, an incredible 9.44M-dot EVF and a 1/400 sec flash sync speed with the mechanical shutter. Whether you are interested in still photos or video, this camera can do just about anything you need it to.   SONY ALPHA 1 CAMERA The Sony a1 is the company's flagship full-frame interchangeable lens camera.  Designed around the new 50.1MP Exmor RS BSI CMOS sensor and the BIONZ XR processor, the a1 is truly a camera which can do it all.  It's 759 point Fast Hybrid Autofocus system offers advanced subject tracking and real-time eye autofocus on both humans and animals.  The optimized processing within the a1 allows it to achieve 30fps continuous shooting at full resolution along with 8K 30p and 4K 120p 10-bit video recording.    8K 30p recording is possible using the full width of the sensor while 4K 120p uses a 10% crop.  Through a Super 35 crop, oversampled 4K recording is also achievable, via an 5.8K capture area.  For shooters who demand more post production flexibility, 4.3K raw 16-bit recording is possible to an external recorder using the camera's full size HDMI A port.   The a1 has also received major upgrades compared to its predecessors, including a 9.44M-dot OLED EVF with a 240fps refresh rate.  The newly designed shutter allows for flash sync speeds up to 1/400 sec and the body includes dual card slots supporting either CFexpress Type A or SD UHS-II memory cards.   SONY ALPHA A1 KEY SPECIFICATIONS 50.1MP Exmor RS BSI CMOS full-frame sensor 759 point Fast Hybrid AF with tracking 30 fps burst shooting with electronic shutter 9.44M dot OLED viewfinder with 240fps refresh rate 8K 30p and 4K 120p video in 10-bit 4.3K 16-bit Raw video output Dual UHS-II / CFexpress Type A card slots THE NAUTICAM NA-a1 UNDERWATER HOUSING Nauticam has supported the Sony Alpha full-frame line since the original a7 with professional grade aluminum housings that offer intuitive access to all the controls and functions of the cameras. As the cameras have evolved, so have the Nauticam housings. The NA-a1 underwater housing provides fingertip access to all key camera controls in a rugged and reliable aluminum underwater housing. Ergonomic camera control access is one of the defining strengths of a Nauticam housing, and the NA-a1 continues this tradition. Integrated DSLR-housing styled handles with ergonomic rubberized grips and stainless steel stiffening brackets add stability and accessory mounting points. The NA-a1 also features dual rear thumb-levers that are easily reached from the handle that access three of the most-used controls on the rear of the camera. The right lever actuates the AF-ON and RECORD buttons while the left lever is mapped to the PLAY button. Atop the housing on the left side are controls in the form of a MODE dial and FOCUS mode lever. The C1, C2 buttons as well as the EV compensation dial also have direct access from the top of the housing. The C3, which is typically assigned to control switching between the EVF and the LCD screen is easily reachable on the rear of the housing from the left handle. ACCESSORY PORTS The NA-a1 has both an M24 port at the front of the housing for both HDMI 1.4 and HDMI 2.0 connectivity (see sidebar for recommendations) as well as an M14 at the rear for the optional Vacuum Valve (25624). The housing comes with electronics pre-installed for Nauticam's Vacuum Check and Leak Detection system. This monitoring system provides constant updates on the water tight and safe-to-dive status of the housing. A simple color coded LED lighting system lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur. The Nauticam system is temperature compensated, eliminating false alarms caused by a change in outside temperature, or from a camera heating up on an action packed dive. PREMIUM PROFESSIONAL OPTICS Nauticam's wide range of ports and in-house corrective optics are the perfect compliment to the NA-a1's inherent flexibility. Built around the N100 Port System, the NA-a1 supports a wide variety of Sony FE mount lenses, as well as EF mount lenses via adapters. In addition, there are several options available to use the groundbreaking WACP and WACP-2 wide-angle corrective lenses as well as the more compact and in-water removable WWL-1B. For example, With the Sony SEL1635GM FE 16-35mm F2.8 GM, the WACP 2 brings the original 105º field-of-view to an impressive 128º with sharper corners, an ~0" minimum focus distance and a more natural looking image than would be provided by a standard glass dome port. FLASH TRIGGERING Both fiber-optic and electrical strobe triggering options are available. The Nauticam Universal Fiber Optical cables attach to the built-in bulkheads atop the housing and feature modular connections for both Sea&Sea-style bushings and INON threaded connections. Triggering is achieved using the optional Nauticam Mini Flash Trigger for Sony (26302) which uses LEDs powered by an on-board coin-cell battery to generate a manual signal that is transmitter via the optical cables to compatible strobes.

With each new generation of camera, Sony continues to make giant strides in the way images are taken and processed.  The Sony a7R V shares the same 61MP sensor as the previous a7R IV, however it has made huge advancements in processing capacity which brings improvements across the board.  With a newly developed AI processing unit, the Sony a7R V brings an all new autofocus system which builds upon more intelligent subject tracking and recognition.   The a7R V features 8 stops of image stabilization and an impressive array of video capabilities including 8K 10-Bit internal recording and 16-Bit RAW external recording over HDMI which are sure to make this a popular choice among underwater shooters. The Sony alphy 7R V Camera The Sony a7R V is Sony’s fifth generation, high-resolution full-frame mirrorless camera. The 61.0-megapixel full-frame back-illuminated Exmor R CMOS sensor combined with BIONZ XR imaging engine delivers unprecedented resolution, fine gradation, and low noise at a processing speed increased by 8x that of the a7R IV. Relative to previous generations, it promises more robust build quality, refined controls, and the company's latest autofocus. The new processor brings the power to significantly enhance the camera's subject recognition capabilities for auto focus. The a7R IV had the ability to recognize and prioritize people, their faces and eyes, but the a7R V takes this much further. The a7R V is designed to better recognize human subjects but also trained to recognize a wider range of non-human subject types. In addition to 8K shooting, 4K video is oversampling from 6.2k pixels without binning, to deliver maximum detail, and offers up to 60p shooting and S-Cinetone for superior cinematic expression. The camera also gives the creative freedom to continuously shoot up to 583 compressed RAW images at 10 fps. Camera Specs 61.0 MP full-frame back-illuminated Exmor R™ CMOS sensor Next-generation AF with Real-time Recognition autofocus deep learning AI 4K 16-Bit Raw Output; S-Log3/S-Cinetone 8K 24p, 4K 60p, FHD 120p 10-Bit Video 3.2" 4-Axis Multi-Angle Touchscreen LCD 8-Stop 5-Axis Image Stabilization Continuously shoot up to 583 compressed RAW images at 10 fps 9.44m-Dot EVF with 120 fps Refresh Rate Setup-Example Nauticam NA-A7R V Underwater Housing The NA-A7RV underwater housing provides fingertip access to all key camera controls in a rugged and reliable aluminum underwater housing. Ergonomic camera control access is one of the defining strengths of a Nauticam housing, and the NA-A7RV continues this tradition. Essential camera parameter changes are made from the handles, without awkward reaches. The NA-A7RV housing inherits the core design elements from the Nauticam pro DSLR range, and bundles them in a more compact package. A patented port locking lever allows lens changes to be made in seconds. Opening the housing for quick battery and media changes is fast and easy with the locking housing latches. All aspects of the system are a seamless extension of the camera. MISSION CONTROL The NA-A7RV underwater housing provides fingertip access to all key camera controls in a rugged and reliable aluminum underwater housing. Ergonomic camera control access is one of the defining strengths of a Nauticam housing, and the NA-A7RV continues this tradition. Essential camera parameter changes are made from the handles, without awkward reaches. The NA-A7RV housing inherits the core design elements from the Nauticam pro DSLR range, and bundles them in a more compact package. A patented port locking lever allows lens changes to be made in seconds. Opening the housing for quick battery and media changes is fast and easy with the locking housing latches. All aspects of the system are a seamless extension of the camera. CAMERA COMPATIBILITY The NA-A7RV housing is compatible with both the Sony a7R V and the Sony a7 IV.  To use the Sony a7 IV, the NA17433UK Conversion Kit is required. HDMI 2.0 A large bore M24 bulkhead is located at the front of the housing for use with HDMI 2.0 or HDMI 1.4 (with a step-down adapter to M16) external monitors and recorders.  An additional M10 threaded mounting position near the front center of the housing also makes using an external monitor even easier. The Sony a7R V can output 16-bit RAW video output to external recorders at up to 4K 60p.  See the resources sidebar for additional details and recommended setups. PREMIUM PROFESSIONAL OPTICS Built around the N100 Port System for Sony E-Mount, the NA-A7RV can support a wide variety of native lenses with a selection of Optical Glass and Acrylic ports.  When used with an E-Mount to EF-mount lens adapter and an N100 to N120 adapter (see Resources sidebar for supported adapters), the NA-A7RV can be used with the Canon N120 EF-Mount port system, expanding the capabilities of the system even further.  Going beyond conventional optics the NA-A7RV can leverage the unparalleled optical quality of Nauticam's Water Contact optics such as the WACP-1 or WWL-1B which offers up to 130º field-of-view, full zoom through, an almost 0" minimum focus distance with supported lenses.  For macro, the SMC-1 and SMC-2 deliver tack-sharp super-macro magnification levels up to 4x with the Sony 90mm macro lens. VACUUM CHECK AND LEAK DETECTION The housing comes with electronics pre-installed for Nauticam's Vacuum Check and Leak Detection system, requiring only the optional M14 Vacuum Valve (NA25624). This monitoring system provides constant updates on the water tight and safe-to-dive status of the housing. A simple color coded LED lighting system lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur. The Nauticam system is temperature compensated, eliminating false alarms caused by a change in outside temperature, or from a camera heating up on an action packed dive. STROBE TRIGGERING Triggering of external strobes is accomplished via the integrated fiber-optic bulkheads when using the optional Mini Flash Trigger for Sony (NA26302).  Electronic triggering is also available via an optional Nikonos or Ikelite Style Bulkhead.  

Take your underwater videography to new depths with the NA-ZVE1 designed for the Sony ZV-E1 Camera. With its compact size, 12.1 MP Full Frame Back Illuminated sensor, advanced image processing, and AI subject recognition, this housing and camera combination unlocks limitless creative possibilities. It's the world's most lightweight and compact full-frame camera with interchangeable lenses. The NA-ZVE1 was built with the image maker in mind making sure all essential camera controls are positioned at your finger tips. ensuring ease of use in challenging environments.  THE SONY ZV-E1 CAMERA The Sony ZV-E1 is a compact and lightweight camera that packs a punch with its high-end video specifications. It features a 12MP Quad Bayer BSI full frame sensor and an ISO range of 80-102,400, extendable to 40-409,600. The ZV-E1 is capable of recording 4K 60p with no sensor crop and 4K 120p with a small 1.1x crop, offering 10-bit 4:2:2 internal recording with S-Log2, S-Log3, and S-Cinetone. It has a single card slot compatible with SD UHS-II. The camera lacks a viewfinder, instead featuring a rear LCD monitor with advanced touch screen capabilities. The ZV-E1 is equipped with a dedicated AI processing unit that can recognize subjects more in-depth, making it a powerful tool for videography. It also introduces a new option for image stabilization, and offers unique features such as Breathing Compensation and CineVlog mode. The release of the ZV-E1 is exciting because it brings high-end video specifications, previously only available in more expensive models like the Sony A7S III, to a more affordable and compact package. This makes advanced videography more accessible to a broader range of creators. Key Camera Specs 12MP full-frame CMOS sensor with no mechanical shutter UHD 4K video at up to 60p without crop Full HD (1080) footage at up to 120p 10-bit 4:2:2 capture (All-I or LongGOP) 4K/120p and 1080/240 will be added later (a paid upgrade in some regions) 5-axis image stabilization UVC 4K/30p video stream when plugged in as USB device Unlimited 4K/30p, 30 minutes 4K/60p (at 25°C) Single UHS-II SD slot Micro HDMI slot 483g including battery NAUTICAM NA-ZVE1 UNDERWATER HOUSING Nauticam is the industry leader in mirrorless interchangeable lens underwater camera support. Nauticam has housed more mirrorless cameras, and more Sony E Mount cameras than any other housing manufacturer. This experience results in the most evolved housing line with broadest range of accessories available today. Pioneering optical accessories elevate performance to a new level. Magnifying viewfinders, the sharpest super macro accessory lenses ever made, and now the highest quality water contact wide angle lenses (the WWL and WACP family) combine with the NA-ZVE1 housing to form a complete imaging system. Nauticam is known for ergonomics, and an unmatched experience. Key controls are placed at the photographer’s fingertips. The housing and accessories are light weight, and easy to assemble. The camera drops in without any control presetting, and lens port changes are effortless. NA-ZVE1 features an integrated handle system. This ergonomic style provides exceptional control access, even with thick gloves, with ideal placement of the shutter release and a thumb-lever to actuate the AF-ON button from the right handle. Nauticam build quality is well known by underwater photographers around the globe. The housing is machined from a solid block of aluminum, then hard anodized making it impervious to salt water corrosion. Marine grade stainless and plastic parts complete the housing, and it is backed by a two year warranty against manufacturing defects. HDMI CONNECTIVITY The NA-ZVE1 features an M24 bulkhead which supports the Nauticam HDMI 2.0/1.4 cable system which can be paired with supported external monitors/recorders. Two of the most popular external monitors setups are the Atomos Ninja V and the newly released SmallHD Ultra 5.   PREMIUM PROFESSIONAL OPTICS Optical performance is just as necessary as camera performance and this becomes even more critical given the challenges of filming underwater. The Nauticam NA-ZVE1 uses the same N100 Port System as other Sony full-frame mirrorless housings which makes for a seamless transition for those upgrading or looking to add an additional camera to their lineup. While this system provides exceptional optical-glass and flat port solutions for a wide variety lenses, the real power can be realized using Nauticam's Water Contact Optics. This lineup of dry and wet lenses are conceived using commercial lens-design software to achieve truly unparalleled underwater image quality both for stills and video in both macro and wide-angle situations. While there are many options, we'll focus on the most compact and versatile setup to match the travel friendly size of the ZV-E1.   WWL-1B is a wide angle conversion lens, compatible with the Sony FE 28-60mm f/4-5.6 lens, providing 130 degree diagonal field of view with full zoom through! The WWL-1B offers class leading center sharpness, corner sharpness, and contrast resulting in some of the best wide angle images possible underwater. CMC-1 and CMC-2 provide the best macro performance for the Sony FE 28-60mm f/4-5.6 lens, with two different magnification strengths, suitable for a wide variety of macro subjects.  CMC-2 is less strong, making it easier to use with more accurate autofocus. CMC-1 is best suited for the smallest of macro subjects. Macro enthusiasts will surely want both! The WACP-C and WACP-1 achieve ultra-wide 130º fields-of-view with reduced distortion over conventional optics while featuring ~0" minimum focus distances, zoom through capabilities and unbeatable corner sharpness at even wide-open apertures such as F5.6.   VACUUM CHECK AND LEAK DETECTION The Nauticam vacuum check and leak detection system is shipped with NA-ZVE1 as standard equipment. With the addition of the optional M14 Vacuum Valve (25624) this monitoring system provides constant updates on the water tight and safe-to-dive status of the housing. A simple color coded LED lighting system lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur. The Nauticam system is temperature compensated, eliminating false alarms caused by a change in outside temperature, or from a camera heating up on an action packed dive.

THE SONY A7CII & A7CR CAMERAS Sony's newest additions to its ultra-compact full-frame lineup are the Sony A7CII and the Sony A7CR, which pack a punch. Let's dive in and take a look at the specs of each of these cameras.  A7CII Specifications 33.0MP full-frame Exmor R back-illuminated CMOS sensor Outstanding 4K 4:2:2 10-bit movie recording up to 60p/50p High-resolution XGA OLED electronic viewfinder with 120fps display Wide-area, high-density autofocus with 759 phase-detection AF point Continuous still shooting at up to 10 fps19 with AF/AE tracking A7CR Specifications Full-frame 61.0 megapixel Exmor R image sensor Advanced 5-axis optical image stabilization with up to 7-steps5 of compensation High-resolution XGA OLED electronic viewfinder with 120fps display Continuous shooting with AF/AE tracking at up to 8 fps Wide-area, high-density autofocus with 759 phase-detection AF Points THE NAUTICAM NA-A7CII/R UNDERWATER HOUSING Nauticam is the industry leader in mirrorless interchangeable lens underwater camera support. Nauticam has housed more mirrorless cameras, and more Sony E Mount cameras than any other housing manufacturer. This experience results in the most evolved housing line with broadest range of accessories available today. Pioneering optical accessories elevate performance to a new level. Magnifying viewfinders, the sharpest super macro accessory lenses ever made, and now the highest quality water contact wide angle lenses (the WWL-1 and WACP-1) combine with the NA-A7CII/R housing to form a complete imaging system. Nauticam is known for ergonomics, and an unmatched experience. Key controls are placed at the photographer’s fingertips. The housing and accessories are light weight, and easy to assemble. The camera drops in without any control presetting, and lens port changes are effortless. NA-A7CII/R features an integrated handle system. This ergonomic style provides exceptional control access, even with thick gloves, with ideal placement of the shutter release and a thumb-lever to actuate the AF-ON button from the right handle. Nauticam build quality is well known by underwater photographers around the globe. The housing is machined from a solid block of aluminum, then hard anodized making it impervious to salt water corrosion. Marine grade stainless and plastic parts complete the housing, and it is backed by a two year warranty against manufacturing defects. PREMIUM OPTICS Several in-house Nauticam optical designs, designed by founder and Managing Director Edward Lai, are the perfect lenses to pair with an a7C underwater system. The magic of the water contact lenses is their tremendous versatility, paired with outstanding in-water performance. Both macro and super wide angle optics are available to the underwater photographer on the same dive. These lenses are completely engineered for use in water, providing the highest image quality available today in a water contact optic.  While there are many options, we'll focus on the most compact and versatile setup to match the travel friendly size of the a7C.   WWL-1 is a wide angle conversion lens, compatible with the Sony FE 28-60mm f/4-5.6 lens, providing 130 degree diagonal field of view with full zoom through! The WWL-1 offers class leading center sharpness, corner sharpness, and contrast resulting in some of the best wide angle images possible underwater. CMC-1 and CMC-2 provide the best macro performance for the Sony FE 28-60mm f/4-5.6 lens, with two different magnification strengths, suitable for a wide variety of macro subjects.  CMC-2 is less strong, making it easier to use with more accurate autofocus. CMC-1 is best suited for the smallest of macro subjects. Macro enthusiasts will surely want both! FAST AND RELIABLE FLASH TRIGGERING Reliable rapid fire manual flash triggering is available with the NA-A7CII/R for a variety of optically fired flashes when used with the LED Flash Trigger (NA26302). The NA-A7C comes fiber optic ready and accepts the Universal Fiber Optic Cable (NA26216). Strobes and light arms can be attached to the housing via included 1″ accessory mounting balls.  Electrical strobe triggering is still an option for those with an investment in legacy lighting gear, requiring the purchase of an accessory electrical bulkhead (NA25056). INTEGRATED VACUUM CHECK AND LEAK DETECTION SYSTEM The Nauticam vacuum check and leak detection system is available with NA-A7C as standard equipment. Combined with an optional vacuum valve (NA25624), this monitoring system provides constant updates on the water tight and safe-to-dive status of the housing. A simple coded LED lighting system lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur.