Sony A7R V Underwater Housing by Nauticam

€3,938.00*

Free shipping

Delivery time: 10 days*

Product number: NA17433
HAN: NA-A7RV

With each new generation of camera, Sony continues to make giant strides in the way images are taken and processed.  The Sony a7R V shares the same 61MP sensor as the previous a7R IV, however it has made huge advancements in processing capacity which brings improvements across the board.  With a newly developed AI processing unit, the Sony a7R V brings an all new autofocus system which builds upon more intelligent subject tracking and recognition.   The a7R V features 8 stops of image stabilization and an impressive array of video capabilities including 8K 10-Bit internal recording and 16-Bit RAW external recording over HDMI which are sure to make this a popular choice among underwater shooters.

The Sony alphy 7R V Camera

The Sony a7R V is Sony’s fifth generation, high-resolution full-frame mirrorless camera. The 61.0-megapixel full-frame back-illuminated Exmor R CMOS sensor combined with BIONZ XR imaging engine delivers unprecedented resolution, fine gradation, and low noise at a processing speed increased by 8x that of the a7R IV. Relative to previous generations, it promises more robust build quality, refined controls, and the company's latest autofocus.

The new processor brings the power to significantly enhance the camera's subject recognition capabilities for auto focus. The a7R IV had the ability to recognize and prioritize people, their faces and eyes, but the a7R V takes this much further. The a7R V is designed to better recognize human subjects but also trained to recognize a wider range of non-human subject types.

In addition to 8K shooting, 4K video is oversampling from 6.2k pixels without binning, to deliver maximum detail, and offers up to 60p shooting and S-Cinetone for superior cinematic expression. The camera also gives the creative freedom to continuously shoot up to 583 compressed RAW images at 10 fps.

Camera Specs

  • 61.0 MP full-frame back-illuminated Exmor R™ CMOS sensor
  • Next-generation AF with Real-time Recognition autofocus deep learning AI
  • 4K 16-Bit Raw Output; S-Log3/S-Cinetone
  • 8K 24p, 4K 60p, FHD 120p 10-Bit Video
  • 3.2" 4-Axis Multi-Angle Touchscreen LCD
  • 8-Stop 5-Axis Image Stabilization
  • Continuously shoot up to 583 compressed RAW images at 10 fps
  • 9.44m-Dot EVF with 120 fps Refresh Rate

B46I0125

Setup-Example

Nauticam NA-A7R V Underwater Housing

The NA-A7RV underwater housing provides fingertip access to all key camera controls in a rugged and reliable aluminum underwater housing. Ergonomic camera control access is one of the defining strengths of a Nauticam housing, and the NA-A7RV continues this tradition. Essential camera parameter changes are made from the handles, without awkward reaches.

The NA-A7RV housing inherits the core design elements from the Nauticam pro DSLR range, and bundles them in a more compact package. A patented port locking lever allows lens changes to be made in seconds. Opening the housing for quick battery and media changes is fast and easy with the locking housing latches. All aspects of the system are a seamless extension of the camera.

MISSION CONTROL

The NA-A7RV underwater housing provides fingertip access to all key camera controls in a rugged and reliable aluminum underwater housing. Ergonomic camera control access is one of the defining strengths of a Nauticam housing, and the NA-A7RV continues this tradition. Essential camera parameter changes are made from the handles, without awkward reaches.

The NA-A7RV housing inherits the core design elements from the Nauticam pro DSLR range, and bundles them in a more compact package. A patented port locking lever allows lens changes to be made in seconds. Opening the housing for quick battery and media changes is fast and easy with the locking housing latches. All aspects of the system are a seamless extension of the camera.

CAMERA COMPATIBILITY

The NA-A7RV housing is compatible with both the Sony a7R V and the Sony a7 IV.  To use the Sony a7 IV, the NA17433UK Conversion Kit is required.

HDMI 2.0

A large bore M24 bulkhead is located at the front of the housing for use with HDMI 2.0 or HDMI 1.4 (with a step-down adapter to M16) external monitors and recorders.  An additional M10 threaded mounting position near the front center of the housing also makes using an external monitor even easier. The Sony a7R V can output 16-bit RAW video output to external recorders at up to 4K 60p.  See the resources sidebar for additional details and recommended setups.

PREMIUM PROFESSIONAL OPTICS

Built around the N100 Port System for Sony E-Mount, the NA-A7RV can support a wide variety of native lenses with a selection of Optical Glass and Acrylic ports.  When used with an E-Mount to EF-mount lens adapter and an N100 to N120 adapter (see Resources sidebar for supported adapters), the NA-A7RV can be used with the Canon N120 EF-Mount port system, expanding the capabilities of the system even further.  Going beyond conventional optics the NA-A7RV can leverage the unparalleled optical quality of Nauticam's Water Contact optics such as the WACP-1 or WWL-1B which offers up to 130º field-of-view, full zoom through, an almost 0" minimum focus distance with supported lenses.  For macro, the SMC-1 and SMC-2 deliver tack-sharp super-macro magnification levels up to 4x with the Sony 90mm macro lens.

VACUUM CHECK AND LEAK DETECTION

The housing comes with electronics pre-installed for Nauticam's Vacuum Check and Leak Detection system, requiring only the optional M14 Vacuum Valve (NA25624). This monitoring system provides constant updates on the water tight and safe-to-dive status of the housing. A simple color coded LED lighting system lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur. The Nauticam system is temperature compensated, eliminating false alarms caused by a change in outside temperature, or from a camera heating up on an action packed dive.

STROBE TRIGGERING

Triggering of external strobes is accomplished via the integrated fiber-optic bulkheads when using the optional Mini Flash Trigger for Sony (NA26302).  Electronic triggering is also available via an optional Nikonos or Ikelite Style Bulkhead.  

Arm Attachment: 1-inch ballhead
Body Material: aluminum
Camera System: Mirrorless (MIL)
Camera manufacturer: Sony
Strobe connector: optical Sea&Sea
Tripod connection: Thread ¼
portsystem: N100
Weiterlesen
Technical data

  • Dimensions: 340mm(W)x 170mm(H) x 127m(D)

  • Weight in air: 2.7kg

  • Weight in water: 0.3kg incl. camera and battery

  • Depth Rating: 100m

  • Compatible Cameras: Sony a7R V camera, a7R IV  with Conversion Kit

  • Port System: N100 Port System for Sony E-Mount Camera System


Scope of delivery

  • Sony A7R V Underwater Housing by Nauticam

  • Spare Main O-ring, o-ring remover and lubricant

  • CR-2032 Battery (for Moisture Alarm)

  • Set of Allen Keys

  • Instruction Manual


Only the components of the item that are listed here will be delivered. Accessories and/or decoration shown in our images are for demonstration purposes only. In particular, we would like to point out that the purchase of an underwater housing does not include a camera and often not a port nor an external viewfinder. If you have any questions about the configuration of your system, do not hesitate to contact us.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.

HDMI 2.0

on stock
M24 Adaptor for HDMI 2.0 Cable (to use with 25087 with NA-A7RIV+SIII)
M24 Adaptor for HDMI 2.0 Cable (to use with 25087 with NA-A7RIV+SIII)

€55.00*
HDMI 2.0 Cable M24A3R140-M28A1R170 by Nauticam
This is the HDMI 2.0 cable necessary to use the NA-A7SIII with the 17922 Nauticam Atomos Ninja V Housing for Atomos Ninja V 5” 4Kp60 4:2:2 10-bit Reorder/Monitor/Player. Note: this cable supports RAW 16bit 4.2K (4264 x 2408) up to 59.94p output but actual capture quality is subject to recorder capabilities.

€265.00*

Spare parts

on stock
M16 plug for housing (with o-ring)
To cover an M16 socket on an underwater housing from Nauticam.

€23.00*
on stock
M14 plug for housing (with o-ring)
Plug for M14 bulkhead on underwater housings.

€23.00*
on stock
Housing o-ring 90120
Housing O-ring for the following Nauticam housings NA-D90 NA-D7000 NA-7000V NA-60D NA-600D NA-650D NA-A7RIV NA-Z50 NA-A1 NA-A7SIII

€22.00*
N100 Gehäusedeckel mit Bajonettfassung
Die Hartplastikkappe schützt die Port-Dichtungsfläche der unterstützten N100-Gehäuse und verhindert das Eindringen von Staub während der Lagerung. Ausgestattet mit einem Bajonettverschluss, der es ermöglicht, ihn mit dem Portverriegelungssystem des Gehäuses zu sichern.

€60.00*
on stock
Spare O-Rings for 1 inch ballheads
Spare O-rings for 1-inch ball heads in the popular Nauticam blue.

€16.00*

Similar products

Sony A7R V Underwater Housing by Isotta
The Isotta underwater housing for the Sony A7R V Controls On/off lever for the Sony Alpha 7R V Ergonomic lever for focusing and releasing the camera, easy to use even with gloves on Lens release lever Front command dialC1 button; C2 button; C3 button; C4/delete button Mode dial Still Picture/Movie/S&Q lever Zoom knob Connection safety lever Movie (REC) lever AF-ON lever Rear L dial rear control dial R Lock button rear control dial R Menu button AEL button Multi-selector playback button Buttons on the control wheel Fn button  

€3,390.00*
Sony a7R V Underwater Housing by Sea&Sea
Universal compatibility(*) with Sony Alpha series. The future-oriented mirrorless SLR compatible housing is now fully loaded. (*) For other Sony Alpha cameras customize kits a needed. Please contact us. Enhancement Customization Kit The shooting mode lever cannot be used. This can be handled by using an optional kit. S&Q cannot be used. Universal design for the future The back panel is designed to be large. The back acrylic panel is more than twice as large as before to improve visibility of the monitor and reduce the underwater weight. Furthermore, it is a sustainable design that can be used with new cameras in the future with minimal parts replacement.  Full range of standard equipment Grip Plus made of silicone material. Robust yet secure fit to hold the housing in place. Lighting can be deployed as desired from the SA8 fixed ball base. Pre-equipped with lanyard hooks for convenient transportation.  Newly designed fiber-optic cable cover Newly designed fiber-optic cable cover included. Prevents optical cable terminals from falling out and smartly protects light-emitting panels and cable terminals. Includes a strap to prevent loss of the cover.  Leak Alarm Unit as standard equipment The Leak Alarm Unit, which was previously available as an option, is now included as standard equipment. It is effective not only for early detection of underwater flooding accidents, but also for protection of equipment by checking its waterproof performance before entry. CR2032 lithium battery included. Strobe Synchro System The fiber-optic cable connection enables manual firing of the YS strobe. Compatible with optional Sea&Seas “Optical YS Converter S1” which converts the strobe light emission signal of the camera to LED light and synchronizes with the SEA&SEA YS strobe. It is a high-performance converter that does not just emit simple light-emitting signals, but also performs TTL auto light Control. YS strobes can be electrically connected with a sync cord with an optional electrical Connection. Please contact us for any futher questions. Focus Point Movement Settings To perform "focus point operation" during shooting, please make a custom setting for the focus point in the dial customization of the camera in advance. The focus point can be moved by operating the front/rear dial. Other Features The Port Lock prevents the port from turning or loosening and the Port Lock lever is specifically located to avoid being unlocked accidentally. The housing is equipped with a lens-lock release button which makes it possible to change lenses easily, without opening the housing. Pulling out the Focus/Zoom Dial gives sufficient room inside the housing to easily accommodate larger diameter lenses. All controls have luminescence stickers which glow in dark environment. Equipped with the Optical Viewfinder 0.5x as standard. Other optional viewfinders such as the VF180 1.2x, VF45 1.2x and Optical Viewfinder 0.66x, 0.8x can be used. ※Some vignetting occurs.When the VF180 1.2x is mounted on housing, the uper part of the camera's viewfinder cannot be viewed due to vignetting. Equipped with two sacrificial zinc diodes (one on the front case and the other on the rear) to prevent electrolysis damage. Tripod screw mount is located on the centre underside of the housing. Equipped with under guard to protect from scrach.

€4,995.00*

Tripod

Stativplatte für NA-A7S/GH4/A7II/GH5/A9
Stativplatte, die an der Unterseite des Gehäuses befestigt wird und drei Standard 1 Zoll Kugelköpfe für Stativbeine oder anderes Zubehör bietet. HINWEIS: Eignet sich nicht für die Cinema-Gehäuse von Nauticam

€580.00*
on stock
Mounting Ball Set for Tripod
This kit allows for the secure mounting of industry standard 1" ball mounts directly onto the NA-A9 housing that provides a low-profile attachment point for tripod legs or accessory light arms. Compatible with Nauticam Housings: NA-A9 NA-A7RIII NA-BMPCC NA-XT3 NA-RIV NA-Z50 NA-XT5

€77.00*
Universal Quadra-Pod Plate
  A stable filming platform is crucial to capturing many underwater scenes. While larger cinema systems such as the NA-C200, RED Komodo and RED DSMC2 housings feature integrated stabilization options, many Nauticam DSLR and Mirrorless systems now have an option for a similar level of support with the Universal Quadra-Pod Plate. INTRODUCING UNIVERSAL QUADRA-POD PLATE FOR NAUTICAM HOUSINGS   Featuring a flexible housing mounting position, the Quadra-Pod attaches via the integrated threaded mounts on the bottom of supported housings with large knurled thumb screws. The Quadra-Pod can be used in either Quadrapod or Tripod configurations. QUADRAPOD CONFIGURATION TRIPOD CONFIGURATION There are five separate positions with which the Quadra-Pod can be mounted relative to the housing extending either more towards the front or rear of the housing. This flexible positioning allows for the use of various ports and accessories without interference. Four 1" ball mounts can be used to attach a variety of leg options and configurations such as Nauticam double ball arms. The Nauticam Universal Quadra-Pod gives DSLR and Mirrorless users a flexible solution to achieving a more stable filming position underwater while maintaining the low profile that makes these systems appealing.

€375.00*

Ball heads

Monitor Housing Mounting Adaptor
This kit replaces the standard handle top-mounting plates to allow for the mounting of the Nauticam Monitor Housings on the Fitting camera housings.

€190.00*
on stock
M10 Strobe Mounting Ball for Housing
Provides an additional ball mount for housings with available M10 threaded mount. Installation Guide: Nauticam M5 & M10 Strobe Mounting Balls from Nauticam on Vimeo.

€40.00*
M5 Strobe Mounting Ball for Housing
Strobe mounting ball that attaches to M5 threaded mount on select housings. Installation Guide: Nauticam M5 & M10 Strobe Mounting Balls from Nauticam on Vimeo.

€27.00*
on stock
M14 Vacuum Valve II
Installing vacuum valve to housing Remove the plug of the M14 accessory port from the housing. Remove the cap from the vacuum valve. Tighten the vacuum valve to the housing with the tool provided. Building up vacuum Remove the cap of the vacuum valve. Connect the hand pump to the valve and pump several times until it reaches the target vacuum level. The LED light will turn flashing yellow while vacuum is building up, then steady green when the target vacuum level is reached. Attention: After the target vacuum is reached, i.e. steady green light, attach the cap back to the vacuum valve. It is recommended to leave the housing for at least 20mins to ensure it is sealed. If the LED light changes from steady green light to rapidly flashing yellow light, that means there is a leakage and please check every O-ring and conduct the vacuum test again. Please ensure that the cap is attached back to the vacuum valve before going underwater. Vacuum can be released by pushing the red release button. Attention: Please DO NOT attempt to go over the designated vacuum level, i.e. stop pumping when the LED turn green. Excessive vacuum level may lead to the malfunction of the camera and lens. Note: Although the vacuum indicator is designated to compensate for a certain amount of temperature variation, it is recommended to conduct the vacuum test in an environment where the temperature is stable. After set up, the meaning of the LED indicator in the housing: Flashing “Blue” light: Standby mode. The moisture alarm is active, and the system is ready for vacuum indication whenever a vacuum is detected. Flashing “Red” light with beeping sound:Moisture is detected. Flashing “Yellow” light: Some vacuum is detected, target vacuum level is not reached. Steady “Green” light: Target vacuum level is reached. Rapidly flashing “Yellow” light: Vacuum is dropping. (Will occur only after target vacuum level is reached) Rapidly flashing “Red” light: Vacuum is totally lost. Circuit stalled until switched off. (Will occur only after target vacuum level is reached)

€205.00*
Handschlaufe für Standard-Handgriffe
Dieser Handschlaufe wird am Griff 28113 befestigt, der auf den folgenden Gehäusen mit den Standardgriffen wie z.B.: NA-1DXII, D500, D5, 80D, 5DIV und A9.

€45.00*

Flash Trigger

on stock
Mini Flash Trigger for Sony
Nauticam flash trigger units allow the use of robust and reliable fiber optic cables to fire external strobes, providing dependable, rapid-fire flash triggering over fiber. Flash triggers allow motor drive shooting sequences, perfect for fast moving action. This flash trigger plugs into the A7 camera hotshoe and provides an optical signal for fast, continuous strobe firing. Automatic TTL flash control is not supported by this flash trigger, flash power is set manually on the strobe itself.

€285.00*
on stock
TTL-Converter for Sony A1/A7/A9-series in Nauticam housings
Optoelectronic TTL converter (for SONY) for NAUTICAM underwater housings NA- NA-A7 II, A7R III, A7RIV, A9, A9 II. Compatible underwater flashes: Inon Z-330 / Z-240 / S-220, Sea&Sea YS-D1 / YS-D3 Mark II / YS-250, Ikelite DS-230 / DS160 / DS160 DS-125, Subtronic Pro-270 / Pro-160, RetraFlash PRO TTL and HSS on the RetraFlash Fantastic TTL accuracy allows photographers to relax and rely entirely on automatic flash exposure control. Many creative tasks are made possible by using extremely fast HSS shutter speeds of up to 1/8000 with the Retra Pro flash in manual mode. The TTL converter firmware also has some other important updates related to its common functionality. The Retra PRO profile can be set by the user üvia the TTL converter's built-in rotary switch. The TTL/M modes can be switched underwater simply by using the camera name or the flash button. In manual mode, the flash intensity can be adjusted manually üvia the camera wheel/scale, but also üvia the flash control knob. (+/-) TTL flash compensation is supported by the firmware, the full range is available via the camera control in the range -3ev......+3ev. The firmware supports sync settings for the 1-st /2-nd curtain and the rear curtain. Continuous (serial) recording is supported. The HSS firmware of the TTL converter supports the HSS functionality of the Retra Pro flash. The built-in rotary switch must be set to the Retra Pro profile (position - "7"). Available HSS shutter speeds for Sony A7-A9: 1/320 ....1/8000 sec. The Retra flash allows the HSS flash intensity to be adjusted with the rotary knob. In the updated firmware, switching to HSS shutter speeds is also included in the general functionality of the TTL converter (also for all other positions of the rotary switch), - usable for shooting with ambient light at high shutter speeds if required. However, the X-Sync speed limit (1/250 for Sony A7-A9) is still automatically supported for TTL modes, as required for mono flash TTL underwater flash. Incredibly long battery life in the TTL converter: 1-3 years of continuous operation. The product has extremely low power consumption. The converter features an automatic on/off switching module that saves battery power. No mechanical switch is required to switch UW Technics TTL converters on and off. The TTL converter firmware includes TTL profiles for the following underwater flashes: Retra Pro, Inon Z-330/ Z-240/S-2000, Sea&Sea YS-D2/ YS-D1/ YS-250, Ikelite DS-161/ DS-160 and Subtronic Pro-270/Pro-160. Each profile can be easily set by the user üvia an onboard switch. Full compatibility with all SONY mirrorless cameras, regardless of model and TTL protocol version.

€499.00*
on stock
Adapter for fibre-optic cable to Nauticam
Adapter for connecting fibre optic cables with plugs (Sea&Sea standard) to Nauticam underwater housings.

€6.50*
on stock
s-TURTLE MANUAL trigger for SONY systems
A reliable Manual trigger for underwater photographers that works via fiber optic cable or sync cord. s-TURTLE  MANUAL This Manual trigger was developed for Sony DSLR and MILC camera systems. The s-TURTLE MANUAL is the perfect choice for the demanding underwater photographer who needs an easy to use, affordable, and reliable trigger that works with the most popular underwater strobes (Inon, Ikelite, Sea&Sea, Subtronic, OneUW, Retra, Backscatter miniflash etc). Features: 1st or 2nd curtain, HSS mode (Switch on the "WL mode"). The Internal charging system works via a USB AB connector. Compatible camera models are the SONY DSLR and Mirrorless cameras. Compatible strobes (as of 01.09.2020.): Ikelite DS160 Inon Z240/Z330 Sea&Sea YS-250, YS-D1, YS-D2, D2J YS-D3, YS-110a, Subtronic Pro 160, Pro 270 One UW Retra old and new models.   Retra PRO (HSS mode available in manual "WL" mode!) The S-TURTLE MANUAL is a user-friendly trigger: you simply connect the LED or the sync cord connector and you can take hundreds of shots without charging. The TURTLE MANUAL triggers fit into the most popular underwater housings (tested with Nauticam, Subal, Hugyfot, Isotta, Ikelite, Seacam, Saltedline models). If you want to connect your strobe via fiber optic cable we recommend using multicore cable! (Please write Us which kind of connection do you use. We also recommend writing us what kind of underwater strobe will you control with the TURTLE trigger so we can be sure you got a product that fulfills your needs.) There is also a USB cable in the package for charging.

€280.00*
on stock
s-Turtle Smart 2 TTL-Trigger for Sony
A reliable TTL and Manual trigger which works via fiber optic cable or sync cord. s-TURTLE 2 SMART underwater photo trigger for Sony camera models This underwater TTL trigger was developed for Sony High-end mirrorless camera systems. The s-TURTLE SMART underwater flash trigger is the perfect choice for the demanding underwater photographer who needs a reliable TTL converter that works with the most popular underwater strobes (Inon, Ikelite, Sea&Sea). Our company was the first on the market that offered a TTL trigger for the popular Sony camera models, and our proven product has some unique features. The s-TURTLE 2 SMART triggers for Sony underwater setups fit into the most popular underwater housings (tested with Nauticam, Subal, Seafrogs, Hugyfot models). Compatible Sony camera models in TTL/MANUAL mode:  A72, A7R2, A7S2 , A73, A7R3, A7S3, A7R4, A74, A1, A7C, 6X00 series (HI+ continuous shooting is available in A74, A1, A7R5, A92 tested) Compatible strobes (as of 01.2022.):  Ikelite DS160, Inon Z240/Z330, Sea&Sea YS-D1, YS-D3 ,Subtronic 270, Retra PRO X and Backscatter Mini Flash 2 (HSS mode available in manual (WL)mode!) As we regularly add new models please download and run the software before purchasing, to check the compatible camera and strobe types. The s-TURTLE 2  SMART is a state-of-the-art user-friendly TTL trigger that can be upgraded by the user via the USB port. It allows you to set up the strobe characteristics, and some special features. You can also check the settings or the battery level.  The user can set up the strobe model and can choose which mode will be used in "WL" mode. "WL" mode is a special manual mode where the trigger doesn't make preflash! It's possible to set this in the camera menu, so the user can easily change the trigger mode from manual/TTL or back under the water.  The WL mode can be configured to: Manual mode with First curtain Manual mode with Second curtain. A special strobe mode (multiflashing expo, more details in manual.) The Internal charging system works via USB AB connector via the USB cable which is in the box.  The package contains the s-TURTLE 2 SMART TTL trigger for Sony cameras and the LED panel (with the new, brighter 150 cd LEDs) or the special cable for sync cord connection. If you want to connect your strobe via fiber optic cable we recommend using multicore (613)cable! (Please write Us about which kind of connection you use. We also recommend writing us about what kind of underwater strobe will you control with the TURTLE trigger so we can set up the unit you ordered.) The setup software for PC is downloadable from our website: you can find it on the right side of the page.  Mac version is coming soon! There is also a USB cable in the package for charging and setup.

€365.00*

HDMI 1.4

HDMI (D-A) cable in 180mm length (for connection from HDMI bulkhead to camera)
This is an HDMI cable for use inside supported housings to convert Type D to Type A HDMI connections with a length of 220mm.

€83.00*
Underwater Monitor WED-7 Pro
The WED-7 Pro is a professional HD monitor specially designed for underwater photographer. The product is made of aluminum alloy, with carbon-fiber trim panels and delicate stainlesssteelchrome-plated buttons. It is High-end and professional product. The underwater monitor uses a full HD FHD display, plays for 4K HDMI input and outout,and is configuredwith a variety of auxiliary tools, so that the photographer is more freely and with ease in shooting. Professional auxiliary shooting function: The product has a variety of professional shooting functions, such as: brightness histogram, audio column, auxiliary focus, false color, exposure prompt, monochrome display, nine grid, square, etc., all can better help the photographer effectively monitor and control the picture to the process of shooting and creating works. Long back-up life: The product is powered by two 18650 lithium batteries, the longest working time can be up to 3.5 hours, and the product has a battery indicator light, so that the photographer can observe the battery power at any time. 4K signal transmission: The product supports 4K HDMI input and output, and high-definition pictures of the camera can be displayed on the monitor in real time through 4K signal transmission of HDMI. 7-inch FHD: The product features a 7-inch full HD screen with 1920x1200 resolution and 440PPI pixel density, as well as 500CD /m² high brightness and 1200:1 high contrast. Ultra-wide viewing Angle: The choice of IPS display has an ultra-wide viewing Angle of 160°, which allows the photographer to easily get a clear picture when adjusting the position. True color: The product uses the trustworthy Rec.709 high-definition color standard in the professional field, and accurately restore the color without distortion or color bias, it shows the real image. Hood: The product design has a professional hood, so that the photographer can get the ideal viewing effect when using in the outdoor bright light. Excellent image processing engine: the product is matched with an independent image processing engine, which improves the light and dark effect and contrast of the picture, so that the picture quality is more exquisite. Excellent deep waterproofing effect: UP to 80m/263ft IP68 waterproofing grade: professional waterproofing design, full process technology and quality control, as well as real simulation of various deep water conditions of pressure testing.

€1,568.00*
on stock
WED-5 Underwater Monitor
5-inch HD Underwater Monitor by Weefine A lightweight made of aluminium that is travel-friendly and practical. This is how the WED-5 underwater monitor from Weefine presents itself. With a brightness of just under 500 nits and 16.7 million colours, it allows you to fully assess your shots even in the water. The monitor housing is milled from aluminium in the highest precision and then protected with a solid surface anodisation. This makes the monitor resistant to salt water and overheating.

€998.00*