Nikon D6 Underwater housing by Nauticam

This item is discontinued. Please find accessories and technical data here.

Product number: NA17225
HAN: NA-D6

The Nikon D6 is the brand's latest professional level DSLR that packs incredible autofocus capabilities and superior image quality to allow for capturing images and video in even the most challenging lighting situations or during the fastest action.  The D6';s rugged exterior is built around a full-frame 20MP CMOS sensor paired with Nikon's 105-point triple-sensor autofocus system that can allow the D6 to focus at even -4.5EV.  The D6 can also capture UHD 4K video at up to 30fps with a 1.5x crop.

THE NIKON D6 DSLR CAMERA

Nikon's professional DSLR camera bodies are designed to give the highest possible image quality along with industry leading intelligent autofocus in a package that is robust and reliable regardless of the conditions.  The 20MP CMOS sensor, powered by Nikon's latest EXPEED 6 processor works in tandem with the brand's most powerful autofocus system to insure sharp images with incredible detail and the lowest levels of noise and distortion possible.

Camera Specs

  • 20.8 MP CMOS Sensor with EXPEED 6 Processor
  • 100-102,400 ISO (expandable to 3,280,000)
  • 105-point Autofocus System
  • 14fps continuos shooting
  • UHD 4K 30p video with ~1.5x crop

The 105-point cross-type AF system reduces the amount of non-AF-sensitive areas in the frame and with the new 17 custom Group Area AF function, autofocus can be tuned to match the scene type.  The D6 can shoot at up to 14fps continuous shooting at ISO levels up to 102,400 (expandable to 3,280,000).

In addition to still images, the D6 captures UHD 4K video with an ~1.5x crop factor at up to 30p.  An HDMI output allows for the use of external monitors and recorders.  A 1000BASE-T LAN connection also allows for external control or image transfer at speeds up to 15% faster than with the D5.

The Nikon D6 features 14 customizable controls, allowing the user quick access to their most needed functions.  The Custom Settings Menu can hold up to four custom shooting combinations making switching between different scene types faster and more reliable.  

The EN-EL18c Li-ion battery delivers up to 3,580 shots per charge or up to 105 minutes of video recording. The D6 features dual XQD/CFexpress card slots which can be setup to record in an overflow or backup configuration.

THE NAUTICAM NA-D6 UNDERWATER HOUSING

Nauticam-17225-Nikon-D6-9

Nauticam's lineup of aluminum housings are designed with the user in mind offering easy assembly, proven durability, intuitive control placement and an extensive range of optics and accessories.  The NA-D6 is designed specifically for the Nikon D6 to take advantage of the camera's customizability and powerful autofocus features.

MISSION CONTROL

The NA-D6 is designed with the Mission Control philosophy, placing the most used controls within easy reach from the ergonomic handles.  The NA-D6 features double thumb levers at the rear of the housing that trigger the AF-ON and REC buttons of the camera on the right side and PLAYBACK/INFO on the left.  Nested levers for ISO and the 'Pv' control are also located near the right handle for easy access.  A dual action lever for 'Fn1' and 'Fn2' customizable buttons a the front of the camera has been redesigned for enhanced usability over the NA-D5 version.

HMDI AND ETHERNET

Connectivity to external monitors via HDMI or external controls over Ethernet are facilitated through the bulkheads of the NA-D6.  The housing has M28 and M14 bulkheads at the front and a rear M16.  Check the Resources section for compatible monitor and ethernet configurations.

FLASH TRIGGERING

The NA-D6 ships with a pre-installed manual LED flash trigger which provides reliable flash triggering for the majority of optically triggered external underwater strobes.  A TTL version of the flash trigger (NA26308) is also available to provide automatic exposure control with compatible strobes.

OPTICS AND ACCESSORIES

The Nauticam N120 Port System supports a wide variety of Nikon F Mount lenses with both optical glass and acrylic port options.  The NA-D6 can also take advantage of Nauticam's water-contact optics such as the WACP-1, WACP-2 as well as the SMC-1 and SMC-2 which are designed to deliver the highest image quality possible underwater for both wide-angle and macro. Nauticam's magnifying viewfinders, available in both 45º and 180º versions allow for easier use of the D6's large bright optical viewfinder and can be installed in minuted without tools.

Nauticam-17225-Nikon-D6-8

Arm Attachment: 1-inch ballhead
Body Material: aluminum
Camera System: DSLR
Camera manufacturer: Nikon
Strobe connector: optical Sea&Sea
Tripod connection: Thread ¼
portsystem: N120
Weiterlesen
Technical data

  • Dimensions: 368 mm (W) x 233 mm (H) x 147 mm (D)

  • Weight in air: 3.8 kg

  • Weight in water: 0.05 kg (incl. camera and battery)

  • Depth Rating: 100 m

  • Port Mount: N120

Scope of delivery

  • Nikon D6 Underwater housing by Nauticam

  • 1x Manual LED flash trigger_ pre installed

  • 90134 Spare main O-ring, O-ring remover and lubricant

  • 2x Optical bulkhead caps

  • 2x Handles with mounting balls

  • Panasonic CR-2450 Battery (for moisture alarm)

  • Set of Allen Keys

  • Manual instruction card

  • Padded housing bag and shoulder strap

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.
TTL Converter for Nikon
This flash trigger offers both optical and electrical triggering  Optical triggering is recommended for flashes equipped in this way. Compatible housings: NA-D5 NA-D6 NA-D500 NA-D850 NA-Z7 NA-Z7II NA-Z8 Compatible flashes: Ikelite DS-160, DS-161, DS-161 Inon Z-240, Z-330 Sea&Sea YS-250, YS-D1, YS-D2, YS-D2J, YS-D3II RetraFlash PRO, PRO X To trigger your flash units electrically, add the appropriate electrical connections and connect them to the flash trigger board via two red Micro-MaTch connectors. Two new electrical connections have been created for this purpose. NA26074 Nikonos style connector NA26075 Ikelite style connector

€540.00*
on stock
M16 Vacuum Valve II
Installing vacuum valve to housing Remove the plug of the M16 accessory port from the housing. Remove the cap from the vacuum valve. Tighten the vacuum valve to the housing with the tool provided.   Building up vacuum Remove the cap of the vacuum valve. Connect the hand pump to the valve and pump several times until it reaches the target vacuum level. The LED light will turn flashing yellow while vacuum is building up, then steady green when the target vacuum level is reached. Attention: After the target vacuum is reached, i.e. steady green light, attach the cap back to the vacuum valve. It is recommended to leave the housing for at least 20mins to ensure it is sealed. If the LED light changes from steady green light to rapidly flashing yellow light, that means there is a leakage and please check every O-ring and conduct the vacuum test again. Please ensure that the cap is attached back to the vacuum valve before going underwater. Vacuum can be released by pushing the red release button. Attention: Please DO NOT attempt to go over the designated vacuum level, i.e. stop pumping when the LED turn green. Excessive vacuum level may lead to the malfunction of the camera and lens. Note: Although the vacuum indicator is designated to compensate for a certain amount of temperature variation, it is recommended to conduct the vacuum test in an environment where the temperature is stable.   After set up, the meaning of the LED indicator in the housing: Flashing “Blue” light: Standby mode. The moisture alarm is active, and the system is ready for vacuum indication whenever a vacuum is detected. Flashing “Red” light with beeping sound:Moisture is detected. Flashing “Yellow” light: Some vacuum is detected, target vacuum level is not reached. Steady “Green” light: Target vacuum level is reached. Rapidly flashing “Yellow” light: Vacuum is dropping. (Will occur only after target vacuum level is reached) Rapidly flashing “Red” light: Vacuum is totally lost. Circuit stalled until switched off. (Will occur only after target vacuum level is reached)

€205.00*
45° viewfinder for Nauticam SLR housing
Nauticam's improved 45°angle viewfinder is the perfect complement to your housing, providing a bright, clear and undistorted 1:1 image of the camera's viewfinder, as well as a 45°viewing angle. The viewfinder can be rotated to any angle, which is important when shooting in a vertical orientation. The 45º viewfinder also provides more clearance for your regulator, allowing for a more comfortable viewing position. Introducing the NAUTICAM 45° VIEWFINDER . Long- or short-sightedness? The viewfinder features an external knob for vision compensation; easy diopter adjustment can now be made underwater without disassembling the viewfinder . Proven design The body is made of anodised aluminium and all lens elements and prisms in the viewfinder are precision ground and multi-layer coated to ensure optimum light transmission and no distortion . INSTALLING THE SEARCHER . With Nauticam housings, it is easy to switch between the standard 0.66x and Enhanced 45° viewfinder, in most cases without tools or adapters. With optional adapter kits, it can also be adapted to the housings of Ikelite, Aquatica, Sea & Sea and Nexus. Note: Because some newer camera models have higher magnifications and a decreasing eye point, there may be a slight reduction in view from edge to edge when using a Nauticam magnification viewfinder. The extent varies, but the benefits of the magnification viewfinder remain.

€1,210.00*
on stock
M28-M16 Step Down Adapter
Step down adapter to convert an M28 to an M16 size bulkhead.

€71.00*
M14 Nikonos 5-pin Bulkhead with Micro Connector for Nikon TTL Converter
M14-Anschluss zur elektrischen Auslösung von 5-poligen Blitzen im Nikon-Stil und ist speziell für den Einsatz mit dem Nikon TTL-Wandler ausgelegt und mit den Gehäusen NA-D5/D500/D850/Z7 kompatibel.

€160.00*
Monitor Housing Mounting Adaptor
This kit replaces the standard handle top plates to allow the mounting of Nauticam monitor housings to compatible Nauticam underwater housings.

€190.00*
M28 HDMI 2.0 Adaptor
For attaching HDMI 2.0 cable to M28 ports

€64.00*
Ethernet Surface Cable Set (45m)
Ethernet cable for use with an external monitor

€1,950.00*
M28C1R215-M28A1R170 HDMI 2.0 Cable
Dies ist das HDMI 2.0 Kabel, das notwendig ist, um das NA-Ninja V Gehäuse mit dem NA-1DXIII Gehäuse über den M28-Anschluss zu verwenden.  

Housing Lemo Bulkhead with Integrated Ethernet Cable
Housing Lemo Bulkhead with Integrated Ethernet Cable (for NA-D6)

€750.00*