Z CAM E2-M4/S6/F6/F8 Underwater Housing by Nauticam

Product number: NA16505

Manufacturer: Nauticam

Our benefits

More than 1,000 items in stock
free shipping from € 200 within the EU
Partner for Film and TV Productions

THE Z CAM LINEUP

The Z Cam flagship lineup is comprised of four models, the E2-F8, E2-F6, E2-S6, and the E2-M4. The Nauticam NA-E2F housing will accommodate all four models.

Key Camera Specifications:

E2-F8

8K 30fps, 6K 30fps, 4K 60fps, 10-bit color
12-Bit ProRes RAW Recording over HDMI to Atomos Ninja V
Full Frame CMOS Sensor
Dual native ISO
14 stops dynamic range
ZRAW supported
EF Mount
Gigabit Ethernet for data, control, and live preview

E2-F6

6K 60fps, 4K 120fps, 10-bit color
12-Bit ProRes RAW Recording over HDMI to Atomos Ninja V
Full Frame CMOS Sensor
15 stops dynamic range
ZRAW supported
EF Mount
Gigbit Ethernet for data, control, and live preview

E2-S6

6K 60fps, 4K 100fps, 10-bit color
12-Bit ProRes RAW Recording over HDMI to Atomos Ninja V
Super 35 CMOS Sensor
14 stops dynamic range
ZRAW supported
EF Mount
Gigabit Ethernet for data, control, and live preview

E2-M4

4K 160fps, 10-bit color
12-Bit ProRes RAW Recording over HDMI to Atomos Ninja V
4/3" WDR CMOS Sensor
13-15 stops dynamic range (16 stops with WDR enabled)
ZRAW (partial debayer)
MFT Mount
Gigabit Ethernet for data, control, and live preview

THE NAUTICAM NA-E2F HOUSING

The NA-E2F follows suit with the original NA-E2 as one of the lightest and smallest raw-capable cinema housings ever produced. Nauticam has been a leader in cinema housings with offerings for RED, ARRI, Canon, PhantomFlex, Sony and now Z Cam.

The NA-E2F uses the N120 Cinema port system, shared with Nauticam's other N120 platform cameras which allows for easy transition to the NA-E2F from other N120 Nauticam systems. The N120 system also provides access to Nauticam's line of professional premium optics such as the WACP-1/2 and SMC-1/2.

16505-NA-E2F-8

The Z Cam E2-M4 can be used with either the Z Cam EF Mount or using the native MFT mount with Metabones EF-MFT Speed Booster Ultra 0.71x Adaptor. When using the Metabones Speed Booster, the mounting position of the camera tray must be adjusted by the user.

There are 17 LANC control buttons ergonomically placed around the housing including dedicated iris+/iris-, record, focus near/focus far, eND+/eND-, and many more. 1/4"-20 size mounting threads are located on the top and bottom of the housing for easy mounting of cinema accessories.

The NA-E2F supports an ethernet surface feed in 5m (pole cam) and 45m (studio) lengths. The Z Cam E2 lineup offers a wide range of remote control options including live preview over ethernet. This opens up the option of using an ethernet to lighting adaptor, then having an iPad or iPhone on the surface to allow monitoring and full control via the Z Cam app.

The housing also features adjustable handles with cinema style zoom and focus knobs.

The E2 lineup supports Sony NP-F series batteries and the NA-E2F matches this compatibility up to and including the FP-970.

As with the NA-BMPCC2 and NA-E2, the NA-E2F allows for the internal mounting of a Samsung T-5 SSD drive as recording media making the transition from capture to edit seamless.

The Z Cam E2 lineup requires an external monitor and Nauticam produces several options for both SmallHD and Atomos monitors. To access the 12-Bit ProRes RAW Recording, you will need to use the Atomos Ninja V monitor with the Nauticam Ninja V housing. The NA-E2F features both an M28 and four M16 bulkheads supporting both HDMI 2.0 (M28) and HDMI 1.4 (M16) connections.

16505-NA-E2F-9

HDMI OUTPUT

Required accessories for HDMI 2.0 Cable System

25079 M28A2R210-M28A1R170 HDMI 2.0 Cable (for NA-GH5V/E2/E2F to use with Ninja V housing)
25088 Cable Clamp for NA-E2/E2F Housing with Screws

Required accessories for HDMI 1.4 Cable System

16243 HDMI A-D Cable in 0.5m Length for RED DSMC2/C200/EVA1/E2 (for internal connection)
25033 standard HDMI bulkhead with M16 thread

Recommended monitor housing

17922 Nauticam Atomos Ninja V Housing for Atomos Ninja V 5? Recorder/Monitor (with HDMI 2.0 support)
17920 NA-502B-H Housing for SmallHD 502 Bright Monitor (with HDMI 1.4 input support)

Properties

Arm Attachment:	1-inch ballhead
Body Material:	aluminum
Camera System:	Cinema
Camera manufacturer:	Z Cam
Tripod connection:	Thread ¼
portsystem:	N120 (Cinema)

Data according to manufacturer. Errors and changes reserved.

Technical data

Dimensions (with handles). 336 mm (W)x 185 mm(H) x 242 mm(D)

Weight in Air. 3.58 kg

Weight in Water (incl. camera and battery): -0.27 kg

Depth Ratin: 100m

Port Opening:N120

Scope of delivery

Z CAM E2-M4/S6/F6/F8 Underwater Housing by Nauticam

90139 Housing O-ring, lubricant, O-ring remover

2x Handles with mounting balls

CR2032 Battery (for moisture alarm and vacuum system)

Padded Travel Case

Allen Wrench Set

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Be the first to share your insights.

Please enter a valid email address.

Your question *

Please enter a valid question.

I agree that my data will be processed to answer the question. I have taken note of the Privacy Policy and agree to the information described therein.*

Fields marked with * are mandatory.

There aren't any asked questions yet.

0.5kg Trim Weights for Housing Skids (4pcs)

Four pieces of 0.5kg trim weights for Housing Skids

€445.00*

available

M10 Strobe Mounting Ball for Housing

Provides an additional ball mount for housings with available M10 threaded mount.

€40.00*

available

M16 Vacuum Valve II by Nauticam

Installing vacuum valve to housing Remove the plug of the M16 accessory port from the housing. Remove the cap from the vacuum valve. Tighten the vacuum valve to the housing with the tool provided. Building up vacuum Remove the cap of the vacuum valve. Connect the hand pump to the valve and pump several times until it reaches the target vacuum level. The LED light will turn flashing yellow while vacuum is building up, then steady green when the target vacuum level is reached. Attention: After the target vacuum is reached, i.e. steady green light, attach the cap back to the vacuum valve. It is recommended to leave the housing for at least 20mins to ensure it is sealed. If the LED light changes from steady green light to rapidly flashing yellow light, that means there is a leakage and please check every O-ring and conduct the vacuum test again. Please ensure that the cap is attached back to the vacuum valve before going underwater. Vacuum can be released by pushing the red release button. Attention: Please DO NOT attempt to go over the designated vacuum level, i.e. stop pumping when the LED turn green. Excessive vacuum level may lead to the malfunction of the camera and lens. Note: Although the vacuum indicator is designated to compensate for a certain amount of temperature variation, it is recommended to conduct the vacuum test in an environment where the temperature is stable. After set up, the meaning of the LED indicator in the housing: Flashing “Blue” light: Standby mode. The moisture alarm is active, and the system is ready for vacuum indication whenever a vacuum is detected. Flashing “Red” light with beeping sound:Moisture is detected. Flashing “Yellow” light: Some vacuum is detected, target vacuum level is not reached. Steady “Green” light: Target vacuum level is reached. Rapidly flashing “Yellow” light: Vacuum is dropping. (Will occur only after target vacuum level is reached) Rapidly flashing “Red” light: Vacuum is totally lost. Circuit stalled until switched off. (Will occur only after target vacuum level is reached)

€205.00*

Set of four 0.25kg trim weights

Set of four 0.25kg trim weights for NA16227 (Epic/LT Housing Skids)

€350.00*

HDMI A-D Kabel für RED DSMC2/C200/EVA1

internes HDMI A-D Kabel für RED DSMC2/C200/EVA1 (0,5 Meter Länge)

€165.00*

M28A2R210-M28A1R170 HDMI 2.0 Cable

Dies ist das HDMI 2.0 Kabel, das notwendig ist, um das NA-Ninja V Gehäuse mit dem NA-GH5V Gehäuse über den M28-Anschluss zu verwenden.

€315.00*

Details

Cable Clamp with Screws

Insures proper routing of the HDMI cable with the NA-E2/E2F housing.

available

Housing Mounting Ball with 1/4'' Screws

This standard 1" mounting ball is designed to work with housings that feature the 1/4-20 threaded mounting locations such as the NA-E2 and NA-BMPCC6K. NOTE: please confirm the housing you wish to use with this ball mount features the 1/4-20 threading before purchase.

€43.00*

NA-E2F Housing Skids

These 300mm long skids attach to the integrated mounting locations on Nauticam NA-E2F housings. M5 mounting balls can also be mounted to the skids. (sold separately)

€820.00*

Conversion Kit for E2C to Use in NA-E2 Housing

Dieses Umbau-Set wird benötigt, um die Z CamE2C in dem Z CAM E2-M4/S6/F6/F8 Unterwassergehäuse von Nauticam nutzen zu können.

€695.00*

Details

Replacement of Housing Lemo Bulkhead with Integrated Ethernet Cable

€695.00*

Ethernet Surface Cable Set in 45m length

Ethernet cable for use with an external monitor

€1,950.00*

Top Handle for E2/F/C70/BGH1/BMPCC Housings

A top handle for cinema housings that can be mounted in either forward or rear facing orientation. Top handle for Cinema System Top Handle for E2/F/C70/BGH1/BMPCC Housings.

€230.00*

Similar products

Z CAM E2/E2C 4K Cinema Underwater Housing by Nauticam

The Z Cam E2 The Z Cam E2 range consists of three models, the namesake E2, the E2C and the E2G. The E2 is the true powerhouse of the range, featuring a 4/3" WDR CMOS sensor that produces 10-bit colour with up to 16 dynamic levels. C4K can be shot at up to 160 frames per second in a variety of ProRes flavours, as well as Z Cam's RAW codec ZRAW partial-debayer. An MFT lens mount means the E2 can be used with a wide range of open-source lenses from Panasonic, Olympus and Sigma. Important camera specifications: Micro Four Third (MFT) WDR CMOS sensor. MFT lens mount 10-bit C4K at 160fps ProRes 422HQ or ZRAW The Nauticam NA-E2 Underwater Geäuse The NA-E2 sets the standard as the lightest and smallest RAW-ready cinema underwater gear ever produced. Nauticam is a leading supplier of Cinema underwater housings with offerings for RED, ARRI, Canon, PhantomFlex, Blackmagic, Sony and now Z Cam. The NA-E2 uses the N85 port system, which is shared with Nauticam's other MFT platform cameras, allowing easy transition to the NA-E2 from other MFT Nauticam systems. The N85 system also provides access to Nauticam's premium professional optics such as WWL-1 and CMC-1/2. A dedicated mounting lever is located on the right side of the walker within easy reach of the adjustable ergonomic grips. 1/4"-20 mounting threads are located on the top and bottom of the walker, allowing easy mounting of cinematic accessories. The E2 supports the CMC-1/2. The E2 supports Sony NP-F series batteries and the NA-E2 matches this compatibility up to and including the FP-970. As with the NA-BMPCC2, the NA-E2 allows a Samsung T-5 SSD drive to be mounted internally as a recording medium, making the transition from recording to editing seamless. The Z Cam E2 requires an external monitor and Nauticam offers several options for SmallHD and Atomos monitors. The NA-E2 has both one M28 and two M16 ports, supporting both HDMI 2.0 (M28) and HDMI 1.4 (M16) connections. HDMI output Required accessories for the HDMI 2.0 cable system NA25079 M28A2R210-M28A1R170 HDMI 2.0 cable (for NA-GH5V/E2 for use with Ninja V housing) *A special positioning cable clamp für NA25079 is required. Required accessories for HDMI 1.4 cable system NA16243 HDMI A-D cable in 0.5m length for RED DSMC2/C200/EVA1/E2 (for internal connection) NA25033 standard HDMI connector with M16 thread. (NA25033 is included in NA-058/502H/FHD5/502B-H Monitorgehüuse). Recommended monitor housing NA17920 NA-502B-H Housing for SmallHD 502 Bright Monitor (with HDMI 1.4 input support) NA17922 Nauticam Atomos Ninja V Gehäuse für Atomos Ninja V 5" 4Kp60 4:2:2 10-bit Reorder/Monitor/Player (without HDMI 2.0 cable) *With camera firmware 0.87, the maximum recording format for the Ninja V with 25079 HDMI 2.0 cable is 4K30P.

Z CAM E2-M4/S6/F6/F8 Underwater Housing by Nauticam

THE Z CAM LINEUP

Key Camera Specifications:

E2-F8

E2-F6

E2-S6

E2-M4

THE NAUTICAM NA-E2F HOUSING

HDMI OUTPUT

Recommended monitor housing

Login

Ask a question

Previously asked questions