+49 2501 9292419
shop@panoceanphoto.com
Shop in Münster
Go to homepage
Wishlist
Shopping cart €0.00*

Olympus OM-D E-M5 III/OM-5 Underwater housing by Nauticam

Olympus OM-D E-M5 III/OM-5 Underwater housing by Nauticam
Olympus OM-D E-M5 III/OM-5 Underwater housing by Nauticam
Olympus OM-D E-M5 III/OM-5 Underwater housing by Nauticam
Olympus OM-D E-M5 III/OM-5 Underwater housing by Nauticam
Olympus OM-D E-M5 III/OM-5 Underwater housing by Nauticam
Photos show accessories that are not part of your order. Only the content of the tab "What's in the box" is relevant.
Olympus OM-D E-M5 III/OM-5 Underwater housing by Nauticam
Olympus OM-D E-M5 III/OM-5 Underwater housing by Nauticam
Olympus OM-D E-M5 III/OM-5 Underwater housing by Nauticam
Olympus OM-D E-M5 III/OM-5 Underwater housing by Nauticam
Olympus OM-D E-M5 III/OM-5 Underwater housing by Nauticam
on stock

€2,075.00*

Prices incl. VAT plus shipping costs

1 in stock

Free shipping

Delivery time: 1-3 working days*

Product number: NA17815
HAN: NA-EM5III
Available stock: 1

THE OLYMPUS OM-D E-M5 MARK III CAMERA

Weighing in at under one pound, the E-M5 Mark III packs an outsized punch. The E-M5 Mark III is built around the same 20Mp Live MOS sensor and Dual F.A.S.T Autofocus system as the larger OM-D E-M1 Mark II. New for the Mark III is the addition of a 121-point hybrid AF system which, combined with the powerful TruePic VIII processor allows for 10fps burst mode capture with AF-C. The Mark III's EVF has been upgraded to an OLED display with 60fps refresh rate. The 5-axis in-body stabilization also receives an 0.5 stop bump to 5.5EV.

The E-M5 Mark III also steps up in the video category with DCI 4K at 24p or stabilized UHD 4K at 30p using the full width of the sensor to maintain field-of-view. HDMI output supports the 1.4 standard with 8-bit 4:2:2 at up to 30p quality.

Key Camera Specs

  • 20MP Live MOS Four Thirds Sensor
  • 121-point Hybrid AF System
  • 10 fps burst shooting with AF-C
  • DCI 4K/24p and UHD 4K/30p video
  • HDMI Output
  • 5.5EV of image stabilization (CIPA-rating)
  • 2.36M-dot OLED EVF
  • With the OM-D E-M5 Mark III, Olympus brings a host of features from their flagship Four Thirds models into an economical and compact package that is ideal for the traveling image maker.

nauticam-NA-EM5III-6

THE NAUTICAM NA-EM5III UNDERWATER HOUSING

The OM-D E-M5 Mark III places the power of the E-M1 Mark II in a compact travel-friendly package and so does the NA-EM5III. Building on our strong lineup of mirrorless camera housings, the NA-EM5III is a feature-rich underwater imaging tool. Our Mission Control design philosophy insures that critical controls are clearly labeled and easy to access with intuitive placement.

The NA-EM5III is built around the extensive N85 port system. Optimized port solutions for a wide variety of Micro Four Thirds lenses and access to our Underwater Corrective Optics makes the Nauticam NA-EM5III a superior image-making platform.

Stainless steel stiffening brackets and a shutter release extension, which are compatible with the optional Easitray II or Flexitray II tray systems are included with the NA-EM5III. An M10 threaded accessory mounting point is also ready to accept the optional M10 strobe mounting ball for additional accessory mounting flexibility.

HDMI CONNECTIVITY

A forward M16 bulkhead can be used for the optional HDMI 1.4 Bulkhead for use with external monitor housings such as the NA-502 or NA-502B for the SmallHD 502 and 502 Bright monitors. See sidebar for recommended configurations.

VIEWFINDER OPTIONS

The E-M5 mark III has an upgraded OLED Electronic Viewfinder. A clear view for fine focus and composition is critical for successful underwater photography, and nothing beats a magnifying viewfinder. These viewfinders use distance, not closeup vision, and provide a large, clear view of the high resolution Olympus electronic viewfinder. Available in Angled 45º (PN 32205) and Straight 180º (PN 32204) formats, both viewfinders have external dioptric adjustments for dialing in perfect correction matched to the photographer’s eyesight.

RAPID FIRE OPTICAL FLASH TRIGGERING

The E-M5 Mark III camera with the included FL-LM3 flash is limited to 2-3 fps continuous shooting, even when a low manual power is selected in the camera flash menu. In situations where continuous optical shooting is required, Nauticam’s Mini Flash Trigger for Olympus (26306) can trigger external strobes over fiber optic at up to 10 frames per second! The trigger is powered by onboard coin style lithium batteries, with thousands of flashes available from a set.

The NA-EM5III comes fiber optic ready and accepts standard Sea & Sea style bushing connections. Nauticam Universal Fiber Optic cables provide exceptional light transmission for accurate TTL performance.

Electrical triggering of legacy wired strobe systems is possible via an electrical Nikonos style bulkhead (optional).

INTEGRATED VACUUM CHECK AND LEAK DETECTION SYSTEM

The Nauticam vacuum check and leak detection system is available with NA-EM5III as standard equipment. Combined with an optional vacuum valve (NA25624 or NA25625), this monitoring system provides constant updates on the water tight and safe-to-dive status of the housing. A simple coded LED lighting system lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur.

Body Material: aluminum
Camera System: Mirrorless (MIL)
Camera manufacturer: Olympus
Strobe connector: optical Sea&Sea
Tripod connection: Thread ¼
portsystem: N85
Weiterlesen
Technical data

  • Dimensions: 196mm(W) x 166mm (H) x 99mm(D)

  • Weight in air: 1.4kg

  • Weight in water: 0.18kg (incl. camera and battery)

  • Depth rating: 100m

  • Port opening: N85


Only the components of the item that are listed here will be delivered. Accessories and/or decoration shown in our images are for demonstration purposes only. In particular, we would like to point out that the purchase of an underwater housing does not include a camera and often not a port nor an external viewfinder. If you have any questions about the configuration of your system, do not hesitate to contact us.

Scope of delivery

  • Olympus  OM-D E-M5 III and OM-5 Underwater housing by Nauticam

  • 2x Optical bulkhead plugs (Pre-mounted)

  • Spare O-ring, O-ring remover and Lubricant

  • Panasonic CR-2032 Battery (for Moisture alarm)

  • A set of Allen key

  • Set of handle brackets with shutter release extension


0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.

Flash Trigger

on stock
Mini Flash Trigger for Olympus
Mini Flash Trigger for Olympus
Nauticam flash trigger units allow the use of robust and reliable fiber optic cables to fire external strobes, providing dependable, rapid-fire flash triggering over fiber. Flash triggers allow motor drive shooting sequences, perfect for fast moving action. This flash trigger plugs into the compatible camera hotshoe and provides an optical signal for fast, continuous strobe firing. Automatic TTL flash control is not supported by this flash trigger, flash power is set manually on the strobe itself.

€295.00*
TTL-Converter for OLYMPUS in NAUTICAM housings
TTL-Converter for OLYMPUS in NAUTICAM housings
Optoelectronic TTL-Converter for OLYMPUS for NAUTICAM NA-OM1, EM1 III, EM10 IV, EM1X, EM5 II, EM5 III underwater housings (22 mm between optical socket centers). New style Hot Shoe (5 pins+frame) of m4/3 system. TTL-Converter does not need a battery. Compatible housings: NA-OM1, EM1 III, NA-EM1 IV. NA-EM1X,NA-EM5 II, NA-EM5 III (22 mm version). Compatible underwater strobes: Inon Z-330 / Z-240 / S-2000, Sea&Sea YS-D1 / YS-D3 Mark II/ YS-250, Ikelite DS-230 / DS-162 / DS161 /, DS160 / DS-125, Subtronic Pro-160, Retra Pro X (including HSS).

€499.00*
on stock
o-Turtle MANUAL trigger for Olympus and Panasonic systems
o-Turtle MANUAL trigger for Olympus and Panasonic systems
A reliable Manual trigger for underwater photographers that works via fiber optic cable or sync cord. o-TURTLE  MANUAL This Manual trigger was developed for Olympus and Panasonic MILC camera systems. The o-TURTLE MANUAL is the perfect choice for the demanding underwater photographer who needs an easy to use, affordable, and reliable trigger that works with the most popular underwater strobes (Inon, Ikelite, Sea&Sea, Subtronic, OneUW, Retra, Backscatter miniflash etc). Features: 1st or 2nd curtain, HSS mode (Over 1/160 shutter speed the TURTLE switch to HSS mode.). The Internal charging system works via a USB AB connector. Compatible camera models are the Olympus and Panasonic Mirrorless cameras. Compatible strobes (as of 01.09.2020.): Ikelite DS160, Inon Z240/Z330, Sea&Sea YS-250, YS-D1, YS-D2, D2J, YS-D3, YS-110a, Subtronic Pro 160, Pro 270, One UW, Retra (old and new models).    Retra PRO (HSS mode available!) The o-TURTLE MANUAL is a user-friendly trigger: you simply connect the LED or the sync cord connector and you can take hundreds of shots without charging. The TURTLE MANUAL triggers fit into the most popular underwater housings (tested with Nauticam, Subal, Hugyfot, Isotta, Ikelite, Seacam, Saltedline models). If you want to connect your strobe via fiber optic cable we recommend using multicore cable! (Please write Us which kind of connection do you use. We also recommend writing us what kind of underwater strobe will you control with the TURTLE trigger so we can be sure you got a product which fulfills your needs.) There is also a USB cable in the package for charging.

€275.00*
i-Turtle 2 Smart TTL Trigger for Panasonic and OM Systems
i-Turtle 2 Smart TTL Trigger for Panasonic and OM Systems
A reliable TTL and Manual trigger which works via fiber optic cable or sync cord. i-TURTLE 2 SMART underwater photo trigger for Nikon mirrorless camera models This underwater TTL trigger was developed for Nikon mirrorless camera systems. The new i-TURTLE 2 SMART TTL trigger works in i-TTL Unified mode where it's possible to change between Manual and TTL modes from the camera. The i-TURTLE 2 SMART underwater flash trigger is the perfect choice for the demanding underwater photographer who needs a reliable TTL converter that works with the most popular underwater strobes. The i-TURTLE 2 SMART has a new, more durable metal hot shoe.  Compatible camera models (as of 11.2022.): Nikon Z30, Z50, Z6, Z6-2, Z7, Z7-2, Z9 Compatible strobes  (as of 09.2021.): Ikelite DS160, Inon Z240/Z330, Sea&Sea D2J, YS-D3, Retra Pro X and Backscatter Mini Flash 2 (HSS mode available in manual (FP) mode!) As we regularly add new models please download and run the software before purchasing, to check the compatible camera and strobe types.  The i-TURTLE 2 SMART is a state-of-the-art user-friendly TTL converter that can be upgraded by the user via the USB port. You can set the strobe characteristic and some special features too. Upon upgrading you simply choose the strobe and the camera model from the software and download the setup to the TURTLE's memory. The TURTLE SMART triggers fit into the most popular underwater housings (tested with Nauticam, Subal, Hugyfot, Isotta, Ikelite, and Seacam models).  The Internal charging system works via a USB AB connector and the included USB cable.  The package contains the i-TURTLE 2 SMART TTL trigger for Nikon mirrorless cameras and the LED panel (with the new, brighter 150 cd LEDs) or the special cable for sync cord connection. If you want to connect your strobe via fiber optic cable we recommend using multicore cable! (Please write Us about which kind of connection you use. We also recommend writing us about what kind of underwater strobe will you control with the TURTLE trigger so we can set up the unit you ordered.)  The setup software for PC is downloadable from this website: https://www.trt-electronics.com/content/media/docs/i_turtle_2_smart_setup_software.zip  Mac version is coming soon!  There is also a USB cable in the package for charging and upgrading.

€365.00*

Similar products

Olympus E-M5 Mark III Underwater Housing by Isotta
Olympus E-M5 Mark III Underwater Housing by Isotta
The housing for Olympus OM-D E-M5 Mark III allows to capitalize on the camera full potential and to capture amazing pictures underwater. The Underwater housing for Olympus E-M5 Mark II by Isotta An easy to use highly professional product has been created through techniques and innovations gained from years of experience. Easy access to all key/main camera controls, even with gloves, by means of clearly labelled lasered long life buttons. The back door has a large window glass for a fine camera display and optical viewfinder view and it is entirely detached from the front body to make easier the camera fitting. The housing stands with great stability due to sturdy and wide rubber feet located on the bottom. ONE HAND OPEN/CLOSE It's very easy to open and close Olympus OM-D E-M5 Mark III, without efforts by the user thanks to the upper helicoid and the bottom centered pins; the camera is placed easily into the housing on a sliding tray that keeps the camera robustly in place. PORTS AND EXTENSION RING A series of ports and extension rings are available in dedicated section. The removable port is fitted thanks to markers and a bayonet 102mm connection to the Olympus OM-D E-M5 Mark III housing. The interchangeable port bodies and extensions rings combine to allow the use of most of lenses on the market for maximum versatility and performance.  LIGHTING Two fiber optic connections are placed in front of the built-in flash and allow the use of external strobe. CONSTRUCTION AND SAFETY Only the best materials are used to manufacture our housings such as anodized aluminum, which is anticorodal and thermo-coated, and stainless steel. A longlasting product that requires easy and simple maintenance by the user. Dual high precision and quality O-Ring seals protect and ensure a perfect and secure watertight for all movable and / or removable parts; a red alarm for humidity/water inside the housing is powered by a battery replaceable by the user. Working depth is 100 metres. Different accessories can be fitted by means of an M8 upper threaded hole, using the Isotta top handle or via the M6 and M8 threaded holes on the bottom. Controls ON/OFF of Olympus OM-D E-M5 Mark III Own camera strobe open/close Ergonomic camera focusing and shutter button for an easy use with gloves Lens release Rear control panel Upper control panel All controls are available on the housing Product Highlights Two fiber optic connectors One M16 port for installation of accessories, e.g. vacuum valves or monitors Back housing completely separable from the front housing Tray with lock for the easy insertion of the camera Single-hand closing knob for back housing Aluminum buttons and dials with engraved symbols identical to camera controls Wide back display viewfinder glass with optical viewfinder Double o-ring seal on all buttons and removable parts Moisture sensor with LED indicator (replacable battery) Removable port - 102mm bayonet Ports security latch to prevent accidental opening Wide, rubber covered feet for solid footing on boat floors or sea floor M8 hole located on upper side of the housing for various accessories such as focus lights Two M6 holes located on housing bottom side for different accessories such as brackets for strobes or tripods External viewfinders can be mounted, INON X-2 compatible

€1,590.00*

HDMI 1.4

Underwater Monitor WED-7 Pro
Underwater Monitor WED-7 Pro
The WED-7 Pro is a professional HD monitor specially designed for underwater photographer. The product is made of aluminum alloy, with carbon-fiber trim panels and delicate stainlesssteelchrome-plated buttons. It is High-end and professional product. The underwater monitor uses a full HD FHD display, plays for 4K HDMI input and outout,and is configuredwith a variety of auxiliary tools, so that the photographer is more freely and with ease in shooting. Professional auxiliary shooting function: The product has a variety of professional shooting functions, such as: brightness histogram, audio column, auxiliary focus, false color, exposure prompt, monochrome display, nine grid, square, etc., all can better help the photographer effectively monitor and control the picture to the process of shooting and creating works. Long back-up life: The product is powered by two 18650 lithium batteries, the longest working time can be up to 3.5 hours, and the product has a battery indicator light, so that the photographer can observe the battery power at any time. 4K signal transmission: The product supports 4K HDMI input and output, and high-definition pictures of the camera can be displayed on the monitor in real time through 4K signal transmission of HDMI. 7-inch FHD: The product features a 7-inch full HD screen with 1920x1200 resolution and 440PPI pixel density, as well as 500CD /m² high brightness and 1200:1 high contrast. Ultra-wide viewing Angle: The choice of IPS display has an ultra-wide viewing Angle of 160°, which allows the photographer to easily get a clear picture when adjusting the position. True color: The product uses the trustworthy Rec.709 high-definition color standard in the professional field, and accurately restore the color without distortion or color bias, it shows the real image. Hood: The product design has a professional hood, so that the photographer can get the ideal viewing effect when using in the outdoor bright light. Excellent image processing engine: the product is matched with an independent image processing engine, which improves the light and dark effect and contrast of the picture, so that the picture quality is more exquisite. Excellent deep waterproofing effect: UP to 80m/263ft IP68 waterproofing grade: professional waterproofing design, full process technology and quality control, as well as real simulation of various deep water conditions of pressure testing.

€1,568.00*
on stock
HDMI (D-D) Cable in 200mm Length
HDMI (D-D) Cable in 200mm Length
This 200mm long HDMi (D-D) cable is designed for the internal connection from the HDMI bulkhead of the housing to the Fujifilm XT2/HX1/A6400 camera HDMI output.

€81.00*
on stock
WED-5 Underwater Monitor
WED-5 Underwater Monitor
5-inch HD Underwater Monitor by Weefine A lightweight made of aluminium that is travel-friendly and practical. This is how the WED-5 underwater monitor from Weefine presents itself. With a brightness of just under 500 nits and 16.7 million colours, it allows you to fully assess your shots even in the water. The monitor housing is milled from aluminium in the highest precision and then protected with a solid surface anodisation. This makes the monitor resistant to salt water and overheating.

€998.00*
45° viewfinder for Mirrorless housing from Nauticam
45° viewfinder for Mirrorless housing from Nauticam
Nauticam's enhanced 45° angle viewfinder is the perfect complement to your MIL housing, providing a bright, clear and undistorted 1:1 image of the camera's viewfinder and a 45° viewing angle. The viewfinder can be rotated to any angle, which is important when shooting in a vertical orientation. The 45º viewfinder also provides more clearance for your controller and allows for a more comfortable viewing position. Introducing the Nauticam 45° viewfinder. Long or short sighted? The viewfinder features an external knob for vision adjustment; hassle-free diopter adjustment can now be easily made underwater without having to disassemble the viewfinder. Proven construction The body is made of anodised aluminium and all lens elements and prisms in the viewfinder are precision ground and multi-layer coated to ensure optimum light transmission and no distortion. Installing the viewfinder With Nauticam housings, it is easy to switch between the standard 0.66x and Enhanced 45° viewfinder, in most cases without tools or adapters. With optional adapter kits, it can also be adapted to Ikelite, Aquatica, Sea & Sea and Nexus housings.

€1,210.00*
on stock
M14 Vacuum Valve II
M14 Vacuum Valve II
Installing vacuum valve to housing Remove the plug of the M14 accessory port from the housing. Remove the cap from the vacuum valve. Tighten the vacuum valve to the housing with the tool provided. Building up vacuum Remove the cap of the vacuum valve. Connect the hand pump to the valve and pump several times until it reaches the target vacuum level. The LED light will turn flashing yellow while vacuum is building up, then steady green when the target vacuum level is reached. Attention: After the target vacuum is reached, i.e. steady green light, attach the cap back to the vacuum valve. It is recommended to leave the housing for at least 20mins to ensure it is sealed. If the LED light changes from steady green light to rapidly flashing yellow light, that means there is a leakage and please check every O-ring and conduct the vacuum test again. Please ensure that the cap is attached back to the vacuum valve before going underwater. Vacuum can be released by pushing the red release button. Attention: Please DO NOT attempt to go over the designated vacuum level, i.e. stop pumping when the LED turn green. Excessive vacuum level may lead to the malfunction of the camera and lens. Note: Although the vacuum indicator is designated to compensate for a certain amount of temperature variation, it is recommended to conduct the vacuum test in an environment where the temperature is stable. After set up, the meaning of the LED indicator in the housing: Flashing “Blue” light: Standby mode. The moisture alarm is active, and the system is ready for vacuum indication whenever a vacuum is detected. Flashing “Red” light with beeping sound:Moisture is detected. Flashing “Yellow” light: Some vacuum is detected, target vacuum level is not reached. Steady “Green” light: Target vacuum level is reached. Rapidly flashing “Yellow” light: Vacuum is dropping. (Will occur only after target vacuum level is reached) Rapidly flashing “Red” light: Vacuum is totally lost. Circuit stalled until switched off. (Will occur only after target vacuum level is reached)

€205.00*
on stock
Adjustable Right Handle for Easitray & Flexitray II
Adjustable Right Handle for Easitray & Flexitray II
An adjustable right-side handle is designed to fit the Nauticam Easitray and Nauticam Flexitray system. The right handle is shipped ready to mount to the Flexitray II and Easitray II. Included are two marine grade stainless steel screws to mount the right handle to your tray. This right side handle, as with the left side handle, is designed to accept the Nauticam base ball 1″ ball adapter. The right side handle can be adjusted for spacing both left-to-right and front-to-back. If additional length is needed, add an optional Nauticam 20mm Extension or Nauticam 30mm Extension is available.

€55.00*
on stock
Flexitray II with Left Handle
Flexitray II with Left Handle
The Nauticam Flexitray II is a very versatile and easy to use camera tray. Flexitray II W adds two 1/4-20 threaded tripod mounting holes to the popular Flexitray II. The Flexitray II W does not have the anti-rotation feature of the Flexitray II. For compact and point-and-shoot housings that have only one tripod mounting screw, please use the Flexitray II. Comparing Flexitray II (top) with Flexitray II W (bottom) Note the tripod mounting holes in the middle of the Flexitray II W. The left handle of the Flexitray II is adjustable for width (length of tray). If additional length is desired, you may add optional Nauticam 20mm extension or Nauticam 30mm extension to this tray. The handle is also adjustable front and back. This adjustment means the ability to adjust your Flexitray II for much more comfort and camera control than ordinary camera trays. The bottom side of the tray is designed to lay flat. On the top side of the tray is a rubber insert which can reduce the possibility of scratching your housing and, more importantly, increase friction between the camera housing and the tray for improved stability. The Flexitray II is supplied with 1/4 – 20 thumbscrews which fit most tripod mount threads. Thumbscrews in thread #12-24 (Ikelite housings) and 6mm thumbscrews are available. Optional T-groove plates and 1 inch ball adapters are custom designed to fit these handles. An adjustable right side handle is available that quickly mounts to this tray. With the optional Nauticam right-handle kit added the distance from handle to handle can be adjusted from 8+3/4 inch to 10+1/4 inch (center to center measurement).

€175.00*

Spare parts

Port Opening Cap for MIL Camera Housings (N85)
Port Opening Cap for MIL Camera Housings (N85)
Protect the housing's port-sealing surface and prevent dust infiltration into the housing when not in use with this replacement housing cap for MIL housings.

€35.00*
on stock
M14 plug for housing (with o-ring)
M14 plug for housing (with o-ring)
Plug for M14 bulkhead on underwater housings.

€23.00*
on stock
Gummistopfen (4 Stck.) für Sea&Sea Glasfaserkabel-Adapter (optisch)
Gummistopfen (4 Stck.) für Sea&Sea Glasfaserkabel-Adapter (optisch)
Gummistopfen (4 Stck.) für Sea&Sea Glasfaserkabel-Adapter (optisch) von Nauticam

€19.00*
on stock
Housing o-ring 90139
Housing o-ring 90139
Spare O-ring for the following Nauticam underwater housings NA-EM5II NA-FX3 NA-A7C NA-ZVE1

€28.00*

Tripod

Stativplatte für NA-A7S/GH4/A7II/GH5/A9
Stativplatte für NA-A7S/GH4/A7II/GH5/A9
Stativplatte, die an der Unterseite des Gehäuses befestigt wird und drei Standard 1 Zoll Kugelköpfe für Stativbeine oder anderes Zubehör bietet. HINWEIS: Eignet sich nicht für die Cinema-Gehäuse von Nauticam

€580.00*

Ball heads

on stock
M10 Strobe Mounting Ball for Housing
M10 Strobe Mounting Ball for Housing
Provides an additional ball mount for housings with available M10 threaded mount. Installation Guide: Nauticam M5 & M10 Strobe Mounting Balls from Nauticam on Vimeo.

€40.00*
on stock
Strobe mounting ball for cold shoe
Strobe mounting ball for cold shoe
Standard 1" ball mount that attaches to the cold-shoe mount of compatible housings. Specially designed metal plate prevents the ball mount from slipping off even if it becomes slightly loose.

€48.00*