Panasonic Lumix GH5 (II) / GH5S Underwater housing by Nauticam

This item is discontinued. Please find accessories and technical data here.

Product number: NA17713V
HAN: NA-GH5V

Panasonic hybrid camera systems have revolutionized all levels of motion imaging capture. Pairing high quality interchangeable lenses with compact camera bodies, the video camera of choice for underwater filmmakers has undergone an incredible transformation in recent years. It has become the Panasonic GH5 and GH5S. An exceptional hybrid housing to complement an exceptional hybrid camera, the NA-GH5V is a video-centric version of the NA-GH5 housing that supports HDMI 2.0 output via the new M28 bulkhead.

THE PANASONIC GH5 (II) AND GH5S

The Panasonic GH5 is a new camera body, positioned above the successful GH4, and improving it in every way. At the core is a 20 megapixel sensor with completely revamped video functionality. When shooting motion, GH5 reads the entire 5K sensor, then resamples in camera to create each individual 4K frame. This results in increased sharpness with no change in lens angle of coverage! Panasonic didn’t stop there, unlocking UHD video capture at up to 29.97 fps with 4:2:2 10-bit chroma sub-sampling. Simply put, this means the GH5 can capture twice the color information with 64x the precision of a 4:2:0 8-bit system. The GH5S, featuring the same body as the GH5 is even more video focused than its sibling. The GH5S features an anamorphic 10.2MP sensor featuring Dual Native ISO technology borrowed from the high end VariCam that can record DCI 4K internally at up to 30fps with 10-bit 4:2:2 color and HDR Hybrid Log Gamma support.

Panasonic GH5 Key Features

  • 20MP Four Thirds sensor (no OLPF)
  • 5-axis in-body image stabilization system with 'Dual IS 2' support
  • All 4K footage taken using full width of sensor (oversampled from 5.1K footage)
  • Internal 4K/30p 10-bit 4:2:2 video capture
  • 4K/59.94p and 50p shooting with 10-bit 4:2:2 output or 8-bit, 4:2:0 internal recording

Panasonic GH5S Key Features

  • 10MP Anamorphic sensor
  • Dual Native ISO of 400 and 2,500
  • DCI 4K 10-bit 4:2:2 at 30fps internal recording with simultaneous 10-bit 4:2:2 feed through HDMI out
  • 1.8x crop factor vs 2.0x crop factor of GH5

Panasonic GH5 II

The updated Venus processor allows the 203.MP sensor to record full-sensor oversampled 4K 10-bit 4:2:0 video at up to 50/60p or 4:2:2 DCI 4K at 30p/25p.  There is also the option to record at VFR DCI 4K/60p for smoother post-processing workflow.  

Other notable improvements to the interface are the ability to resize the waveform exposure assistance tool and the ability to view the vectorscope when setting white balance.  The viewfinder's refresh rate has also been increased to 120hz and the LCD is 1.5x brighter with a wider color space.

The GH5 II will also allow for simultaneous output over HDMI while recording internally at 4K/60p.  The NA-GH5SV is compatible with the Nauticam HDMI2.0/1.4 system to allow for the use of supported external recorders/monitors. 

THE NAUTICAM NA-GH5V UNDERWATER HOUSING

The NA-GH5V housing is small, but not at the expense of functionality or ergonomics. Integrated handles provide a sturdy and comfortable base to operate the system from. A sculpted shutter release lever, thumb lever for AE-L / AF-L, and well placed control dials provide the same operational feel as any Nauticam DSLR housing. Control buttons are placed within easy reach of the handles, with sufficient spacing to allow easy operation, even by feel. The NA-GH5 is a professional grade underwater housing, built with cutting edge manufacturing technology, supporting the pro-level GH5/GH5S camera bodies to its full potential.

The GH5/GH5S feature four custom White Balance Presets allowing the video shooter to store settings for various depths as well as natural/artificial light scenes and switch between them quickly on a dive. Access to these presets is a breeze with the NA-GH5 mission control layout. A second thumb lever on the right side of the housing, easily accessed from the handle, brings up the white balance presets. Simply scroll to the desired preset and film away.

PREMIUM PROFESSIONAL OPTICS

The variety of optics solutions for the NA-GH5 are staggering. Whether you're choosing a MFT open-source standard lens such as the Panasonic 8mm Fisheye or the ultra-fast Olympus 60mm macro lens there is an N85 port system port for you.

Looking for zoom-through capability and both macro and wide on the same dive? The WWL-1 and CMC wet-mate system allows for unmatched corner sharpness for your wide angle and ridiculous reproduction ratios for your macro. The bayonet mount system allows for switching underwater.

TTL AND MANUAL OPTICAL STROBE TRIGGERING

Add the optional Panasonic DMW-FL70 Flash inside the housing for reliable, accurate triggering of optical TTL compatible strobes. Rapid fire manual triggering is also available with the Nauticam Mini Flash Trigger.

HDMI 2.0 OUTPUT

The NA-GH5V housing is a version of the NA-GH5 housing that features the M28 bulkhead connection that supports HDMI 2.0 connections for use with the NA-NinjaV housing for the Atomos Ninja V recorder. This allows for 4K 60p 10-bit 4:2:2 output and recording. The standard NA-GH5 housing supports up to HDMI 1.4.  

INTEGRATED TRIPOD MOUNTS

The NA-GH5 has integrated mounting points on the bottom for industry standard 1" ball-mounts that can be used to attach tripod legs.

Arm Attachment: 1-inch ballhead
Body Material: aluminum
Camera System: Mirrorless (MIL)
Camera manufacturer: Panasonic
Monitor connection: HDMI
Strobe connector: optical Sea&Sea
Tripod connection: Thread ¼
portsystem: N85
Weiterlesen
Technical data

  • Depth Rating. 100m

  • Weight: 2.36kg

  • Dimensions: 331mm (W) × 184mm (H) × 110mm (D)

  • Port Opening: N85

Scope of delivery

  • Panasonic Lumix GH5 / GH5S Underwater housing by Nauticam

  • Spare Main O-ring

  • O-ring Remover

  • CR-2450 Battery (for Moisture Alarm)

  • Lubricant

  • Set of Allen Keys


Only the components of the item that are listed here will be delivered. Accessories and/or decoration shown in our images are for demonstration purposes only. In particular, we would like to point out that the purchase of an underwater housing does not include a camera and often not a port nor an external viewfinder. If you have any questions about the configuration of your system, do not hesitate to contact us.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.

Spare parts

on stock
M16 plug for housing (with o-ring)
To cover an M16 socket on an underwater housing from Nauticam.

€23.00*
on stock
Strobe Mounting Ball for Handle
Attaches to housing handles providing a standard 1" ball mount.

€30.00*
on stock
Housing o-ring 90122
Spare housing O-ring for the following Nauticam underwater housings: NA-7D NA-80D NA-D7100 NA-D7200 NA-D7500 NA-GH5 NA-GH6 NA-G9 NA-REDLT NA-Z7II/Z6II Furthermore, this O-ring also fits N200 ports from Nauticam.

€22.00*

Flash Trigger

Mini Flash Trigger for Panasonic Housings
Nauticam flash trigger units allow the use of robust and reliable fiber optic cables to fire external strobes, providing dependable, rapid-fire flash triggering over fiber. Flash triggers allow motor drive shooting sequences, perfect for fast moving action. This flash trigger plugs into the GH5 camera hotshoe and provides an optical signal for fast, continuous strobe firing. Automatic TTL flash control is not supported by this flash trigger, flash power is set manually on the strobe itself.

€295.00*
on stock
TTL-Converter for Panasonic in Nauticam NA-GH5 housing
TTL-Converter for PANASONIC GH5 for NAUTICAM NA-GH5 underwater housing. New style Hot Shoe (5 pins) of m4/3 system. TTL-Converter does not need a battery. Compatible housings: NA-GH5. Compatible underwater strobes: Inon Z-330 / Z-240, Sea&Sea YS-D1 / YS-D3 Mark II / YS-250, Ikelite DS-230 / DS-162 / DS161 /, DS160 / DS-125, Subtronic Pro-160, Retra Pro X (HSS is NOT supported).

€499.00*

Ball heads

on stock
M10 Strobe Mounting Ball for Housing
Provides an additional ball mount for housings with available M10 threaded mount. Installation Guide: Nauticam M5 & M10 Strobe Mounting Balls from Nauticam on Vimeo.

€40.00*
Monitor Housing Mounting Adaptor to use with NA-GH4/GH5S/V/GH6
This kit replaces the standard handle top plates to enable the monitor housing to be mounted on the NA-GH4/5/6 underwater housings.

€190.00*
on stock
Strobe mounting ball for cold shoe
Standard 1" ball mount that attaches to the cold-shoe mount of compatible housings. Specially designed metal plate prevents the ball mount from slipping off even if it becomes slightly loose.

€48.00*
M5 Strobe Mounting Ball for Housing
Strobe mounting ball that attaches to M5 threaded mount on select housings. Installation Guide: Nauticam M5 & M10 Strobe Mounting Balls from Nauticam on Vimeo.

€27.00*

HDMI 1.4

HDMI (D-A) Cable in 190mm Length
This 190mm long HDMI cable is for the internal connection between the HDMI Bulkhead and the GH5 (II) camera output.

Underwater Monitor WED-7 Pro
The WED-7 Pro is a professional HD monitor specially designed for underwater photographer. The product is made of aluminum alloy, with carbon-fiber trim panels and delicate stainlesssteelchrome-plated buttons. It is High-end and professional product. The underwater monitor uses a full HD FHD display, plays for 4K HDMI input and outout,and is configuredwith a variety of auxiliary tools, so that the photographer is more freely and with ease in shooting. Professional auxiliary shooting function: The product has a variety of professional shooting functions, such as: brightness histogram, audio column, auxiliary focus, false color, exposure prompt, monochrome display, nine grid, square, etc., all can better help the photographer effectively monitor and control the picture to the process of shooting and creating works. Long back-up life: The product is powered by two 18650 lithium batteries, the longest working time can be up to 3.5 hours, and the product has a battery indicator light, so that the photographer can observe the battery power at any time. 4K signal transmission: The product supports 4K HDMI input and output, and high-definition pictures of the camera can be displayed on the monitor in real time through 4K signal transmission of HDMI. 7-inch FHD: The product features a 7-inch full HD screen with 1920x1200 resolution and 440PPI pixel density, as well as 500CD /m² high brightness and 1200:1 high contrast. Ultra-wide viewing Angle: The choice of IPS display has an ultra-wide viewing Angle of 160°, which allows the photographer to easily get a clear picture when adjusting the position. True color: The product uses the trustworthy Rec.709 high-definition color standard in the professional field, and accurately restore the color without distortion or color bias, it shows the real image. Hood: The product design has a professional hood, so that the photographer can get the ideal viewing effect when using in the outdoor bright light. Excellent image processing engine: the product is matched with an independent image processing engine, which improves the light and dark effect and contrast of the picture, so that the picture quality is more exquisite. Excellent deep waterproofing effect: UP to 80m/263ft IP68 waterproofing grade: professional waterproofing design, full process technology and quality control, as well as real simulation of various deep water conditions of pressure testing.

€1,568.00*
on stock
WED-5 Underwater Monitor
5-inch HD Underwater Monitor by Weefine A lightweight made of aluminium that is travel-friendly and practical. This is how the WED-5 underwater monitor from Weefine presents itself. With a brightness of just under 500 nits and 16.7 million colours, it allows you to fully assess your shots even in the water. The monitor housing is milled from aluminium in the highest precision and then protected with a solid surface anodisation. This makes the monitor resistant to salt water and overheating.

€998.00*

Similar products

Panasonic GH5 (II) / GH5S Underwater Housing by Isotta
The housing for Panasonic Lumix GH5 (II) / Panasonic Lumix DC-GH5S allows to capitalize on the camera full potential and to capture amazing pictures underwater. Product details Underwater Housing Panasonic GH5 (II) / GH5S An easy to use highly professional product has been created through techniques and innovations gained from years of experience. Easy access to all key/main camera controls, even with gloves, by means of clearly labelled lasered long life buttons. The back door has a large window anti-scratch glass for a fine camera display and optical viewfinder view and it is entirely detached from the front body to make easier the camera fitting. The housing stands with great stability due to sturdy and wide rubber feet located on the bottom.  ONE HAND OPEN/CLOSE It’s very easy to open and close Panasonic Lumix GH5 / Panasonic Lumix DC-GH5S, without efforts by the user thanks to the upper helicoid and the bottom centered pins; the camera is placed easily into the housing on a sliding tray that keeps the camera robustly in place. PORTS AND EXTENSION RING A series of ports and extension rings are available in dedicated section. The removable port is fitted thanks to markers and a bayonet 102mm connection to the Panasonic Lumix GH5 /  Panasonic Lumix DC-GH5S housing. The interchangeable port bodies and extensions rings combine to allow the use of most of lenses on the market for maximum versatility and performance. Light and flash trigger Two fibre optic connections are located in front of the built-in flash and allow the use of external flash units. They have a manual flash triggering system that can be used with standard over-optical connections. CONSTRUCTION AND SAFETY Only the best materials are used to manufacture our housings such as anodized aluminum, which is anticorodal and thermo-coated, and stainless steel. A longlasting product that requires easy and simple maintenance by the user. Dual high precision and quality O-Ring seals protect and ensure a perfect and secure watertight for all movable and / or removable parts; a red alarm for humidity/water inside the housing is powered by a battery replaceable by the user. Working depth is 100 metres. Different accessories can be fitted directly on the handles, using the Isotta top handle or the M6 and M8 threaded holes on the bottom. Controls ON/OFF of Panasonic Lumix GH5 / Panasonic Lumix DC-GH5S; Own camera strobe open/close; Ergonomic camera focusing and shutter button for an easy use with gloves; Lens release; Rear control panel; Upper control panel; All controls are available on the housing; Features Ergonomic side handles, adjustable (via optional accessory); Two fiber optic connectors; Manual Flash Trigger included; Two M16 halls to be use optionally with electrical sync cord bulkheads and for installation of accessories, e.g. vacuum valves or monitors; Back housing completely separable from the front housing; Tray with lock for the easy fitting of the camera; Single-hand closing knob for back housing; Aluminum buttons and dials with engraved symbols identical to camera controls; Wide back display viewfinder glass with optical viewfinder; Dual O-Ring seals on all buttons and removable parts; Moisture sensor with LED indicator and acoustic signal (replaceable battery); Removable port - 102mm bayonet; Ports security latch to prevent accidental opening; Wide, rubber covered feet for solid footing on boat floors or sea floor; M8 hole located on upper side of the housing for various accessories such as focus lights; Two M6 holes positioned on housing bottom side for different accessories such as brackets for strobes or tripods; External viewfinders can be mounted, INON X-2 compatible;

€3,100.00*
45° viewfinder for Mirrorless housing from Nauticam
Nauticam's enhanced 45° angle viewfinder is the perfect complement to your MIL housing, providing a bright, clear and undistorted 1:1 image of the camera's viewfinder and a 45° viewing angle. The viewfinder can be rotated to any angle, which is important when shooting in a vertical orientation. The 45º viewfinder also provides more clearance for your controller and allows for a more comfortable viewing position. Introducing the Nauticam 45° viewfinder. Long or short sighted? The viewfinder features an external knob for vision adjustment; hassle-free diopter adjustment can now be easily made underwater without having to disassemble the viewfinder. Proven construction The body is made of anodised aluminium and all lens elements and prisms in the viewfinder are precision ground and multi-layer coated to ensure optimum light transmission and no distortion. Installing the viewfinder With Nauticam housings, it is easy to switch between the standard 0.66x and Enhanced 45° viewfinder, in most cases without tools or adapters. With optional adapter kits, it can also be adapted to Ikelite, Aquatica, Sea & Sea and Nexus housings.

€1,210.00*
on stock
M14 Vacuum Valve II
Installing vacuum valve to housing Remove the plug of the M14 accessory port from the housing. Remove the cap from the vacuum valve. Tighten the vacuum valve to the housing with the tool provided. Building up vacuum Remove the cap of the vacuum valve. Connect the hand pump to the valve and pump several times until it reaches the target vacuum level. The LED light will turn flashing yellow while vacuum is building up, then steady green when the target vacuum level is reached. Attention: After the target vacuum is reached, i.e. steady green light, attach the cap back to the vacuum valve. It is recommended to leave the housing for at least 20mins to ensure it is sealed. If the LED light changes from steady green light to rapidly flashing yellow light, that means there is a leakage and please check every O-ring and conduct the vacuum test again. Please ensure that the cap is attached back to the vacuum valve before going underwater. Vacuum can be released by pushing the red release button. Attention: Please DO NOT attempt to go over the designated vacuum level, i.e. stop pumping when the LED turn green. Excessive vacuum level may lead to the malfunction of the camera and lens. Note: Although the vacuum indicator is designated to compensate for a certain amount of temperature variation, it is recommended to conduct the vacuum test in an environment where the temperature is stable. After set up, the meaning of the LED indicator in the housing: Flashing “Blue” light: Standby mode. The moisture alarm is active, and the system is ready for vacuum indication whenever a vacuum is detected. Flashing “Red” light with beeping sound:Moisture is detected. Flashing “Yellow” light: Some vacuum is detected, target vacuum level is not reached. Steady “Green” light: Target vacuum level is reached. Rapidly flashing “Yellow” light: Vacuum is dropping. (Will occur only after target vacuum level is reached) Rapidly flashing “Red” light: Vacuum is totally lost. Circuit stalled until switched off. (Will occur only after target vacuum level is reached)

€205.00*
on stock
Strobe Mounting Ball for Handle
Attaches to housing handles providing a standard 1" ball mount.

€30.00*
HDMI 2.0 Cable M28A2R210-M28A1R170
This is the HDMI 2.0 cable required to use the NA-Ninja V housing with the NA-GH5V housing via the M28 bulkhead.

€315.00*

Tripod

Kugelkopf-Set für Stativ (für NA-GH5/G9) von Nauticam
Dieser Bausatz ermöglicht die sichere Montage von Kugelmontagen nach Industriestandard 1 Zoll direkt auf das NA-GH5-Gehäuse, das einen flachen Befestigungspunkt für Stativbeine oder Zubehör-Leuchtenarme bietet.

€77.00*
Stativplatte für NA-A7S/GH4/A7II/GH5/A9
Stativplatte, die an der Unterseite des Gehäuses befestigt wird und drei Standard 1 Zoll Kugelköpfe für Stativbeine oder anderes Zubehör bietet. HINWEIS: Eignet sich nicht für die Cinema-Gehäuse von Nauticam

€580.00*
Universal Quadra-Pod Plate
  A stable filming platform is crucial to capturing many underwater scenes. While larger cinema systems such as the NA-C200, RED Komodo and RED DSMC2 housings feature integrated stabilization options, many Nauticam DSLR and Mirrorless systems now have an option for a similar level of support with the Universal Quadra-Pod Plate. INTRODUCING UNIVERSAL QUADRA-POD PLATE FOR NAUTICAM HOUSINGS   Featuring a flexible housing mounting position, the Quadra-Pod attaches via the integrated threaded mounts on the bottom of supported housings with large knurled thumb screws. The Quadra-Pod can be used in either Quadrapod or Tripod configurations. QUADRAPOD CONFIGURATION TRIPOD CONFIGURATION There are five separate positions with which the Quadra-Pod can be mounted relative to the housing extending either more towards the front or rear of the housing. This flexible positioning allows for the use of various ports and accessories without interference. Four 1" ball mounts can be used to attach a variety of leg options and configurations such as Nauticam double ball arms. The Nauticam Universal Quadra-Pod gives DSLR and Mirrorless users a flexible solution to achieving a more stable filming position underwater while maintaining the low profile that makes these systems appealing.

€375.00*