+49 2501 9292419
shop@panoceanphoto.com
Shop in Münster
Go to homepage
Wishlist
Shopping cart €0.00*

Sony Cybershot RX100VII ProPackage by Nauticam

Sony Cybershot RX100VII ProPackage by Nauticam
Sony Cybershot RX100VII ProPackage by Nauticam
Sony Cybershot RX100VII ProPackage by Nauticam
Photos show accessories that are not part of your order. Only the content of the tab "What's in the box" is relevant.
Sony Cybershot RX100VII ProPackage by Nauticam
Sony Cybershot RX100VII ProPackage by Nauticam
Sony Cybershot RX100VII ProPackage by Nauticam

€1,895.00*

Prices incl. VAT plus shipping costs

Free shipping

Delivery time: 9 days*

Product number: NA17424P
HAN: NA-RX100VII ProPackage

NA-100VII ProPackage by Nauticam

  • NA-RX100VII UNDERWATER HOUSING
  • flexitray, right handle, two mounting balls
  • M14 vacuum valve
  • shutter extension
  • big padded travelling bag

THE SONY CYBERSHOT DSC RX100 VII CAMERA

The continuation of the longer 24-200mm equivalent zoom lens with the RX100 VII (same as the RX100VI) sets this camera apart from the very popular RX100 V. It hosts a redesigned 20.1MP 1" Exmor RS CMOS sensor, along with an improved BIONZ X image processor, and highly-accurate 357-point hybrid autofocus system. With 5-axis image stabilization and the 20fps blackout free silent shooting (with autofocus), the RX100 VII is going to track your subjects more accurately in photo and video modes.

The RX100 VII captures UHD 4K 30/24fps video that downsamples from the entire sensor width giving extremely sharp details. For slow-motion capture, there is 120fps Full HD, as well as a dedicated HFR mode that allows the camera to record frame rates up to 960fps. Also offering "Steady Shot Active Mode", the RX100VII combines in camera and lens stabilization to give a smooth look to your videos even when making big movements, and with the addition of a microphone jack, video shooters will certainly want to give this camera a second look.

Key Camera Specifications

  • 20.1MP 1"Exmor RS BSI CMOS sensor
  • BIONZ X Image Processor & Front-End LSI
  • ZEISS Vario-Sonnar T* f/2.8-4.5 Lens
  • 24-200mm (35mm Equivalent)
  • Up to 20-fps Blackout-Free Shooting
  • UHD 4K video at 30/24p with HLG & S-Log3 Gammas
  • 0.39" 2.36m-Dot OLED Pop-Up EVF
  • 3.0" 921.6k-Dot 180° Tilting Touchscreen
  • Fast Hybrid AF, 357 Phase-Detect Points
  • Real-Time Tracking and Eye-AF

THE NA-RX100VII UNDERWATER HOUSING

Nauticam has supported every version of the Sony RX100 lineup and with the RX100 VII the housing continues with the N50 interchangeable port system. The NA-RX100VII features the same innovative and user-friendly rotary-latch locking system and two-stage trigger from previous versions as well as the clearly-labeled and intuitive buttons and dials.

MISSION CONTROL

The NA-RX100VII follows Nauticam's design philosophy of placing the camera controls where they are most needed and easily accessible. The record button is colored red and within easy reach of the right side of the housing, even when using an optional tray system. The pop-up flash can be activated or stowed with the camera inside the housing, eliminating the need to preset the flash before inserting the camera and allowing quick changes between artificial and ambient lighting scenarios.

The shutter speed and aperture controls feature easy-to-use control wheels, with the front dial sporting large grooves to facilitate fingertip control without having to reach forward.

INTERCHANGEABLE N50 PORT

To maximize the added flexibility of the longer zoom lens on the RX100 VII, the NA-RX100VII features an interchangeable N50 port. The Standard Port that is included with the housing allows for the use of the full zoom range and is compatible with the NA25107 M67 Flip Diopter Holder. At 90mm equivalent and above, the RX100VII can be used with the SMC-1 wet-optic to achieve true super-macro capability.

PREMIUM PROFESIONAL OPTICS

For super wide-angle, the standard port can be changed for 38702 N50 Short Port with Bayonet Mount. This port is ready to support the WWL-1 Wet-Wide Lens with the intuitive and convenient bayonet-mounting system. Zoom range is still accessible but is limited to 65mm equivalent. The WWL-1 can be changed underwater with the CMC-1 or CMC-2 to give macro capabilities on the same dive.

OPTIONAL PRO PACKAGE CONFIGURATION

The NA-RX100VII is also available in the Pro Package configuration that comes with the Flexitray II, Right Handle, two ball-mounts and M14 vacuum valve pre-installed. The standard NA-RX100VII ships with stainless steel stiffening brackets and shutter release extension should a Nauticam Easitray or Flexitray be added later.

HDMI OUTPUT

The RX100VII has HDMI output for video, allowing for the use of external monitors which make judging exposure, focus and composition easier than using the built-in LCD of the camera. By adding the optional 25028 Socket Extension and 25032 Custom HDMI bulkhead, the NA-RX100VII is compatible with external monitor housings such as the NA-502B-H or NA-Ninja V (HDMI 1.4 connection only).

INTEGRATED VACUUM CHECK AND LEAK DETECTION SYSTEM

The Nauticam vacuum check and leak detection system is shipped with NA-RX100VII as standard equipment. Combined with an accessory M14 Vacuum Valve II (PN 25624), this monitoring system provides constant updates on the water tight and safe-to-dive status of the housing. A simple color coded LED lighting system lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur.

The Nauticam system is temperature compensated, eliminating false alarms caused by a change in outside temperature, or from a camera heating up on an action packed dive.

Attachment lens thread: M67
Body Material: aluminum
Camera System: Compact camera
Camera manufacturer: Sony
Pane material: Optical glass
Port shape: flat port
Strobe connector: optical Sea&Sea
Tripod connection: Thread ¼
portsystem: N50
Weiterlesen
Technical data

  • Dimensions: 151mm(W) x 101mm(H) x 137mm(D)

  • Weight in Air: 1.09 kg

  • Depth Rating: 100m

  • Alarm Battery: CR2032

  • Accessory Ports: 1xM16 (F) and 1xM14(R)

Scope of delivery

  • Sony Cyber-shot DSC-RX100VII Underwater Housing by Nauticam

  • M14 vacuum valve

  • Hand pump

  • Spare O-ring 90135, Removal Tool and Lubricant

  • Allen key Set

  • Padded Travel Case

  • CR2032 Battery (for vacuum system)

  • Set of handle brackets with shutter release trigger

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.

Spare parts

on stock
M16 plug for housing (with o-ring)
M16 plug for housing (with o-ring)
To cover an M16 socket on an underwater housing from Nauticam.

€23.00*
on stock
M14 Vacuum Valve II
M14 Vacuum Valve II
Installing vacuum valve to housing Remove the plug of the M14 accessory port from the housing. Remove the cap from the vacuum valve. Tighten the vacuum valve to the housing with the tool provided. Building up vacuum Remove the cap of the vacuum valve. Connect the hand pump to the valve and pump several times until it reaches the target vacuum level. The LED light will turn flashing yellow while vacuum is building up, then steady green when the target vacuum level is reached. Attention: After the target vacuum is reached, i.e. steady green light, attach the cap back to the vacuum valve. It is recommended to leave the housing for at least 20mins to ensure it is sealed. If the LED light changes from steady green light to rapidly flashing yellow light, that means there is a leakage and please check every O-ring and conduct the vacuum test again. Please ensure that the cap is attached back to the vacuum valve before going underwater. Vacuum can be released by pushing the red release button. Attention: Please DO NOT attempt to go over the designated vacuum level, i.e. stop pumping when the LED turn green. Excessive vacuum level may lead to the malfunction of the camera and lens. Note: Although the vacuum indicator is designated to compensate for a certain amount of temperature variation, it is recommended to conduct the vacuum test in an environment where the temperature is stable. After set up, the meaning of the LED indicator in the housing: Flashing “Blue” light: Standby mode. The moisture alarm is active, and the system is ready for vacuum indication whenever a vacuum is detected. Flashing “Red” light with beeping sound:Moisture is detected. Flashing “Yellow” light: Some vacuum is detected, target vacuum level is not reached. Steady “Green” light: Target vacuum level is reached. Rapidly flashing “Yellow” light: Vacuum is dropping. (Will occur only after target vacuum level is reached) Rapidly flashing “Red” light: Vacuum is totally lost. Circuit stalled until switched off. (Will occur only after target vacuum level is reached)

€205.00*
on stock
M14 plug for housing (with o-ring)
M14 plug for housing (with o-ring)
Plug for M14 bulkhead on underwater housings.

€23.00*
Gummistopfen (4 Stck.) für Sea&Sea Glasfaserkabel-Adapter (optisch)
Gummistopfen (4 Stck.) für Sea&Sea Glasfaserkabel-Adapter (optisch)
Gummistopfen (4 Stck.) für Sea&Sea Glasfaserkabel-Adapter (optisch) von Nauticam

€19.00*
on stock
Housing o-ring 90135
Housing o-ring 90135
Replacement housing O-ring for this underwater housing from Nauticam. NA-RX100III NA-RX100IV NA-RX100V NA-RX100VI NA-RX100VIII NA-G5X NA-G5XII NA-G7X NA-G7XII NA-G7XIII

€21.00*
on stock
Spare cap for vacuum valve II M14/M16
Spare cap for vacuum valve II M14/M16
Spare cap for second generation vacuum valves from Nauticam.

€31.00*
on stock
N50-Port O-Ring
N50-Port O-Ring
Spare O-ring for the N50 port system by Nauticam

€17.00*
on stock
Spare O-Rings for 1 inch ballheads
Spare O-Rings for 1 inch ballheads
Spare O-rings for 1-inch ball heads in the popular Nauticam blue.

€16.00*
Standard Port for LX100(II) und RX100 VI(I) (N50)
Standard Port for LX100(II) und RX100 VI(I) (N50)
Spare Standard Port for LX100(II) und RX100 VI(I) (N50)

€165.00*

Ball heads

on stock
M10 Strobe Mounting Ball for Housing
M10 Strobe Mounting Ball for Housing
Provides an additional ball mount for housings with available M10 threaded mount. Installation Guide: Nauticam M5 & M10 Strobe Mounting Balls from Nauticam on Vimeo.

€40.00*
on stock
Strobe mounting ball for cold shoe
Strobe mounting ball for cold shoe
Standard 1" ball mount that attaches to the cold-shoe mount of compatible housings. Specially designed metal plate prevents the ball mount from slipping off even if it becomes slightly loose.

€48.00*

Macro

Compact Macro Converter CMC-1
Compact Macro Converter CMC-1
The CMC is an extremely powerful super-macro accessory lens optimized for use with both fixed-lens compact, mirrorless interchangeable lens, and DSLR cameras. Part of Nauticam's in-house lineup of wet and dry optics, these accessory lenses are purpose built and rigorously tested to outperform any other optics on the market. Introducing CMC-1 Smaler, lighter, stronger While the Nauticam Super Macro Converter (SMC) design inspired the development of the Compact Macro Converter, the CMC is actually more powerful. The CMC provides more magnification than the SMC with all compatible compact camera systems for which it was designed. As expected, the CMC provides more magnification than any compact camera tested can achieve on its own, and does so with improved working distance. This combination makes CMC ideal for tiny, skittish subjects. Using the popular RX100V as an example, the CMC-1 results in a magnification of 2.3X the smallest subject the camera is capable of photographing with no accessory lens (34.5mm v 80mm), and it does so with 1.4X the working distance (56mm v 80mm). Results with the Canon G7X are even more stunning, providing 3.0X magnification at approximately 2.4X the working distance. To achieve the same image sizes with sealed magnifying lenses a +15 Diopter or stronger would be required, but no +15 Diopter lens can match the overall image quality of CMC-1. This is achieved while maintaining the smallest size and weight possible. Breakthroug Lens Design Prior to the development of the Nauticam accessory macro conversion lenses, achieving super macro underwater meant using tools that were designed for in-air use. These tools simply do not take into account the physics of shooting through water. Thanks to Edward Lai, Managing Director of Nauticam, the CMC-1 takes a radically different approach: hundreds of engineering hours utilizing computer software to model a lens that complements an entire system – camera, lens, port, air, and water – as a whole. This accounts for the critical air-water interfaces in a conversion lens design to achieve the best image quality possible. The improvements are stunning, measurable and a new standard in underwater macro imaging. Uncompromised optical Quality The CMC-1 is constructed from lenses precision crafted of specially formulated low-dispersion optical-grade glass, ground to the most demanding standards. This means greater sharpness and contrast on every shot and extraordinary resolution rivaling a macro lens used in air. Broadband anti-refective coatings effectively reduce common optical issues such as chromatic aberrations, coma, spherical aberration, and field deformation associated with underwater macro photography using traditional magnifying lenses. This means superior light transmission, accurate color and no distortion or vignetting in the most demanding situations. These exceptional optics are assembled in a rugged hard anodized aluminum housing, and nitrogen purged during assembly to eliminate fogging. The CMC-1 is compatible with a variety of camera systems, but the most impressive increase in magnification comes when paired with the Olympus M.ZUIKO DIGITAL ED 60mm f/2.8 Macro Lens for M43 Systems. This combination achieves a 2:1 reproduction ratio. This translates into an image 8.5mm X 6.3MM, and one of the most powerful macro imaging systems available. Optimized for Autofocus By utilizing a specially developed algorithm in the optimization process, the CMC-1 renders superior image quality over the full focusing range of the camera lens. This, combined with the high brightness and contrast of the image, allows the autofocus system of the camera to work well – often better than less powerful close focus lenses. Just as important are the out-of-focus (Bokeh) portions of the image that exhibit the same creamy smooth quality that photographers appreciate when shooting macro in air – all without color fringing common to traditional magnifying lenses. Avoiding Diffraction Due to the overall superior optical performance and precision focus of the CMC-1 it is possible to shoot larger apertures with excellent image quality. This avoids reaching the diffraction limit of high resolution sensors, and allows selective focus effects with narrow depth of field in super macro images. Also compatible with Nikon AF-S 60mm Macro While designed with compact cameras in mind, compatibility with larger formats has proven to be possible in some cases. Nikon AF-S 60mm Macro (not compatible with the earlier SMC-1) provides 1.5 : 1 Reproduction Ratio when with combined CMC-1. This combination is extremely versatile, covering fish portraits, 1:1 macro, and now 1.5:1 super macro on the same dive. Mounting and Using the CMC-1 The CMC-1 ships with the common 67mm threaded lens mount. The CMC-1 has a protruding rear lens element, designed to place the accessory optic as close to the camera lens port as is possible, providing the best overall image quality when used with flip lens adapters. A flush mount adapter ring is used when attaching CMC-1 directly to an underwater housing, and is included with the lens. Flip lens holders, available to suit most Nauticam housings and lens ports, provide the fastest and most convenient lens mount possible. The lens is always threaded in place, and available to be flipped down as needed.

€405.00*
on stock
M67 flip holder for NA-LX100/G5XII/RX100VII standard port
M67 flip holder for NA-LX100/G5XII/RX100VII standard port
This flip holder allows the use of an M67 wet lens optic such as the SMC-1 or CMC-1 on the NA-LX100 (II), NA- G5XII and NA-RX100VI/VII standard port..

€270.00*

Wide Angle

on stock
Short Port 25 with Bayonet-Mount II (N50)
Short Port 25 with Bayonet-Mount II (N50)
This port, designed for the N50 system, comes with a Bayonet Mount on the front for use with the WWL-1B. Please see the N50 Port Chart for supported systems.

€245.00*
3.5 inch acrylic dome port (N50) from Nauticam
3.5 inch acrylic dome port (N50) from Nauticam
This 3.5 inch wide angle dome port is part of the N50 port system and features an acrylic element, anodized aluminum construction and an integrated aluminum port bezel. Designed for fixed-lens compact cameras, this dome port restores the camera's lens field of view in mid-air. Various sized ports are available to support a variety of lenses and housing types. Port extensions or adapters may be required for some ports and housings.

€350.00*
on stock
Wet Wide Lens 1B with float collar (WWL-1B) by Nauticam
Wet Wide Lens 1B with float collar (WWL-1B) by Nauticam
The next generation of WWL-1 is here!  The WWL-1B features the same stunningly sharp optics as the WWL-1, but it now includes an integrated aluminum buoyancy collar to make it nearly neutral in water.  The WWL-1 and now WWL-1B are still the highest quality wet-changeable underwater wide-angle conversion optics ever made, featuring unmatched contrast, overall sharpness, corner sharpness, and clarity. The design is truly full zoom through, allowing zoom to to be used as a tool for framing, and removable in water for close-up and macro shots. INTRODUCING WET WIDE LENS 1B (WWL-1B) 130 DEG. FOV WITH COMPATIBLE 28MM LENSES (INCL. FLOAT COLLAR) The WWL-1 is the highest quality wet-changeable underwater wide-angle conversion optic ever made, featuring unmatched contrast, overall sharpness, corner sharpness, and clarity. The design is truly full zoom through, allowing zoom to to be used as a tool for framing, and removable in water for close-up and macro shots. NA-GX7 & Nauticam WWL-1 Lens Showreel from Nauticam on Vimeo. Breakthrough lens design Every Nauticam lens is a "clean slate" design. These optical systems are engineered entirely as underwater corrective and conversion optics, and not adaptations of in air designs. The process isn't an easy one, but the images captured by WWL-1B and previous Nauticam optical designs prove the effort is well spent. Uncompromised Optical Quality WWL-1B is constructed of 6 precisely ground elements of highly refractive optical glass. All internal elements are coated with a broadband anti reflective coating to keep flare and internal reflections to an absolute minimum. WWL-1 besteht aus 6 präzise geschliffenen Elementen aus hochbrechendem optischem Glas. Alle Innenelemente sind mit einer breitbandigen Anti-Reflexionsschicht beschichtet, um Streulicht und Innenreflexionen auf ein absolutes Minimum zu reduzieren.   Zoom to frame WWL-1B is a full zoom through lens, performing well through the entire zoom range of popular compacts and Micro Four Thirds systems with power zoom lenses. This feature distinguishes this lens from all others on the market, which are designed to be used at a single focal length. The ability to be used with zoom makes WWL-1 extremely versatile! A touch of zoom can be used to crop a subject in camera, or for close-up shots without removing the lens. Stunning field of view 130 degrees of glorious wide angle coverage, and even a bit wider if your camera system allows it! This is a field of view that sits between the popular full frame fisheye lenses (180 degrees diagonal) and ultra wide rectilinear zooms (approximately 110 degrees). This coverage angle was targeted from the very beginning as an ideal coverage angle for a wide variety of underwater imaging scenarios. Big animals, close focus wide angle shots of reef dwelling creatures, and even mid-range fish portraits are all within the range of WWL-1B. Incredible sharpness and contrast The cutting edge optical design employed in WWL-1 results in extremely high overall sharpness, contrast, and edge sharpness. The design is optimized for the high resolution sensors of today, as well as the even higher resolutions sensors of tomorrow. Close focus The ability to focus close is key, and WWL-1B does amazingly well. With all compatible systems at wide angle the lens is able to focus on the front of its dome lens element, maximizing the impact of even small subjects. Amazingly, with the Panasonic 14-42 Power Zoom, the lens is still able to focus on the front of the dome port when zoomed to full telephoto! The best macro images will always be obtained by removing WWL-1 and mounting a macro converter (such as CMC or SMC), but in situations where that is difficult close-up shots can still be obtained without removing the wide angle conversion lens. Compatibility Wet lenses have traditionally been an accessory geared toward compact cameras, but Nauticam set out from the very beginning to support a wider range of systems, with larger sensor sizes. Most impressive is the outstanding performance available with the full frame Sony A7 series cameras using the Sony 28mm /2 Prime lens. In our tests, this combo out-performed all of the Sony wide angle lenses behind dome ports, and is especially well matched to the demanding 42 megapixel sensor in Sony A7R II. Micro four thirds systems used with power zoom lenses are another compelling combination. 130 Degrees on the wide end, with a 3x Zoom Range, and close focus on the front of the dome. This combination is wider, sharper, and has less distortion than the Panasonic 7-14 F/4 and Olympus 7-14 F/2.8 lenses behind a dome port. Twist off the lens, and snap on a CMC for high powered macro photography, capturing an image area 22mm (just under 1?) wide! The full range of compatible systems is listed below. Simple bayonet mounting A new bayonet mounting system has been designed to accompany the WWL-1B release, and maximize ease of use. Lenses snap into place, and are securely locked. A red locking tab releases the lens for removal, and lens holders provide storage for lenses on a strobe arm when not in use. The bayonet mount system has been designed to incorporate vents that quickly flood the space between lens and camera, washing away air bubbles.

€1,395.00*

HDMI 1.4

on stock
HDMI (D-D) cable in 200mm length
HDMI (D-D) cable in 200mm length
HDMI cable with connectors from type D (Micro) to type D (Micro) for connecting a camera to an HDMI socket in 200 mm length (approx. 7.9"). For use with the following underwater cameras by Nauticam: NA-RX100V NA-GH4 NA-A7 NA-A1

€58.00*
Underwater Monitor WED-7 Pro
Underwater Monitor WED-7 Pro
The WED-7 Pro is a professional HD monitor specially designed for underwater photographer. The product is made of aluminum alloy, with carbon-fiber trim panels and delicate stainlesssteelchrome-plated buttons. It is High-end and professional product. The underwater monitor uses a full HD FHD display, plays for 4K HDMI input and outout,and is configuredwith a variety of auxiliary tools, so that the photographer is more freely and with ease in shooting. Professional auxiliary shooting function: The product has a variety of professional shooting functions, such as: brightness histogram, audio column, auxiliary focus, false color, exposure prompt, monochrome display, nine grid, square, etc., all can better help the photographer effectively monitor and control the picture to the process of shooting and creating works. Long back-up life: The product is powered by two 18650 lithium batteries, the longest working time can be up to 3.5 hours, and the product has a battery indicator light, so that the photographer can observe the battery power at any time. 4K signal transmission: The product supports 4K HDMI input and output, and high-definition pictures of the camera can be displayed on the monitor in real time through 4K signal transmission of HDMI. 7-inch FHD: The product features a 7-inch full HD screen with 1920x1200 resolution and 440PPI pixel density, as well as 500CD /m² high brightness and 1200:1 high contrast. Ultra-wide viewing Angle: The choice of IPS display has an ultra-wide viewing Angle of 160°, which allows the photographer to easily get a clear picture when adjusting the position. True color: The product uses the trustworthy Rec.709 high-definition color standard in the professional field, and accurately restore the color without distortion or color bias, it shows the real image. Hood: The product design has a professional hood, so that the photographer can get the ideal viewing effect when using in the outdoor bright light. Excellent image processing engine: the product is matched with an independent image processing engine, which improves the light and dark effect and contrast of the picture, so that the picture quality is more exquisite. Excellent deep waterproofing effect: UP to 80m/263ft IP68 waterproofing grade: professional waterproofing design, full process technology and quality control, as well as real simulation of various deep water conditions of pressure testing.

€1,568.00*
on stock
WED-5 Underwater Monitor
WED-5 Underwater Monitor
5-inch HD Underwater Monitor by Weefine A lightweight made of aluminium that is travel-friendly and practical. This is how the WED-5 underwater monitor from Weefine presents itself. With a brightness of just under 500 nits and 16.7 million colours, it allows you to fully assess your shots even in the water. The monitor housing is milled from aluminium in the highest precision and then protected with a solid surface anodisation. This makes the monitor resistant to salt water and overheating.

€998.00*

Similar products

Sony RX100 VI and VII Underwater Housing by Fantasea
Sony RX100 VI and VII Underwater Housing by Fantasea
Designed for Sony RX100 VI & RX100 VII (24-66mm* zoom) The FRX100 VI Limited Edition Housing features a stylish and ergonomic design, specifically created for the Sony RX100 VI & RX100 VII digital cameras.  The housing's flat port features a 67mm thread, allowing the use of "wet" wide angle and macro conversion lenses, thus capturing a variety of compositions within one single dive.  The housing allows operating the camera lens within an ideal focal range of 24-66mm*.This focal range enables utilizing the most powerful capabilities of the camera for underwater photography.  The housing is manufactured to the highest professional standards of function, style and durability. It is depth rated to 60m/200 feet and features ergonomically designed and labeled controls. The Fantasea FRX100 VI Limited Edition Housing is the ultimate waterproof home for the Sony RX100 VI & RX100 VII.  The FRX100 VI Limited Edition Housing is ideal for outdoor and underwater photography. Underwater photographers can dive or snorkel and capture all the excitement of this fascinating world, while outdoor photographers also have the option of capturing the action of activities such as white water paddle sports, sailing, boating, surfing, fishing, hunting, backpacking and camping.  The FRX100 VI Limited Edition Housing is shock resistant and protects the camera from water, sand, dust, frost and other damaging elements. The FRX100 VI Limited Edition Housing was designed to be compatible with a complete accessory system, enabling photographers to enhance the quality of their images. Features Highlights: Camera lens focal range is limited to 24-66mm*  Depth rated to 60m/200 feet**  Ergonomic design Made from durable injection molded Polycarbonate Full access to all essential camera controls and functions with clearly labeled controls  Dedicated video control button for easy video filming in any shooting mode Shock resistant  Double O-ring main seal  Special cold-shoe mount for lighting accessories  Removable double fiber optic cable connection  Removable flash diffuser Removable anti-glare hood for the LCD screen  Easy and secure installation of camera  Moisture Detector and Alarm  Lens Port Cover  Hand Strap  67mm thread on flat port allows for mounting conversion lenses  Compatible with a wide range of underwater photo accessories Manufacturer’s warranty  * In depths greater than 40 meters, maximum focal length is limited to 60mm ** Using the RX100 VII camera deeper than 50 meters / 180 feet may result in unintentional camera controls activation

Sony Cyber-shot DSC-RX100VII Underwater Housing by Nauticam
Sony Cyber-shot DSC-RX100VII Underwater Housing by Nauticam
THE SONY CYBERSHOT DSC RX100 VII CAMERA The continuation of the longer 24-200mm equivalent zoom lens with the RX100 VII (same as the RX100VI) sets this camera apart from the very popular RX100 V. It hosts a redesigned 20.1MP 1" Exmor RS CMOS sensor, along with an improved BIONZ X image processor, and highly-accurate 357-point hybrid autofocus system. With 5-axis image stabilization and the 20fps blackout free silent shooting (with autofocus), the RX100 VII is going to track your subjects more accurately in photo and video modes. The RX100 VII captures UHD 4K 30/24fps video that downsamples from the entire sensor width giving extremely sharp details. For slow-motion capture, there is 120fps Full HD, as well as a dedicated HFR mode that allows the camera to record frame rates up to 960fps. Also offering "Steady Shot Active Mode", the RX100VII combines in camera and lens stabilization to give a smooth look to your videos even when making big movements, and with the addition of a microphone jack, video shooters will certainly want to give this camera a second look. Key Camera Specifications 20.1MP 1"Exmor RS BSI CMOS sensor BIONZ X Image Processor & Front-End LSI ZEISS Vario-Sonnar T* f/2.8-4.5 Lens 24-200mm (35mm Equivalent) Up to 20-fps Blackout-Free Shooting UHD 4K video at 30/24p with HLG & S-Log3 Gammas 0.39" 2.36m-Dot OLED Pop-Up EVF 3.0" 921.6k-Dot 180° Tilting Touchscreen Fast Hybrid AF, 357 Phase-Detect Points Real-Time Tracking and Eye-AF   THE NA-RX100VII UNDERWATER HOUSING Nauticam has supported every version of the Sony RX100 lineup and with the RX100 VII the housing continues with the N50 interchangeable port system. The NA-RX100VII features the same innovative and user-friendly rotary-latch locking system and two-stage trigger from previous versions as well as the clearly-labeled and intuitive buttons and dials. Example setup MISSION CONTROL The NA-RX100VII follows Nauticam's design philosophy of placing the camera controls where they are most needed and easily accessible. The record button is colored red and within easy reach of the right side of the housing, even when using an optional tray system. The pop-up flash can be activated or stowed with the camera inside the housing, eliminating the need to preset the flash before inserting the camera and allowing quick changes between artificial and ambient lighting scenarios. The shutter speed and aperture controls feature easy-to-use control wheels, with the front dial sporting large grooves to facilitate fingertip control without having to reach forward. INTERCHANGEABLE N50 PORT To maximize the added flexibility of the longer zoom lens on the RX100 VII, the NA-RX100VII features an interchangeable N50 port. The Standard Port that is included with the housing allows for the use of the full zoom range and is compatible with the 25107 M67 Flip Diopter Holder. At 90mm equivalent and above, the RX100VII can be used with the SMC-1 wet-optic to achieve true super-macro capability. PREMIUM PROFESIONAL OPTICS For super wide-angle, the standard port can be changed for 38702 N50 Short Port with Bayonet Mount. This port is ready to support the WWL-1 Wet-Wide Lens with the intuitive and convenient bayonet-mounting system. Zoom range is still accessible but is limited to 65mm equivalent. The WWL-1 can be changed underwater with the CMC-1 or CMC-2 to give macro capabilities on the same dive. OPTIONAL PRO PACKAGE CONFIGURATION The NA-RX100VII is also available in the Pro Package configuration that comes with the Flexitray II, Right Handle, two ball-mounts and M14 vacuum valve pre-installed. The standard NA-RX100VII ships with stainless steel stiffening brackets and shutter release extension should a Nauticam Easitray or Flexitray be added later. HDMI OUTPUT The RX100VII has HDMI output for video, allowing for the use of external monitors which make judging exposure, focus and composition easier than using the built-in LCD of the camera. By adding the optional 25028 Socket Extension and 25032 Custom HDMI bulkhead, the NA-RX100VII is compatible with external monitor housings such as the NA-502B-H or NA-Ninja V (HDMI 1.4 connection only). INTEGRATED VACUUM CHECK AND LEAK DETECTION SYSTEM The Nauticam vacuum check and leak detection system is shipped with NA-RX100VII as standard equipment. Combined with an accessory M14 Vacuum Valve II (PN 25624), this monitoring system provides constant updates on the water tight and safe-to-dive status of the housing. A simple color coded LED lighting system lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur. The Nauticam system is temperature compensated, eliminating false alarms caused by a change in outside temperature, or from a camera heating up on an action packed dive. Recommended Accessories HDMI Connectivity Accessories NA25028 Socket extension for 25032 HDMI bulkhead with M16 thread NA25032 Custom HDMI bulkhead to use with socket extension NA25046 HDMI (D-D) cable in 200mm length (for connection from HDMI Bulkhead to camera)    

€1,355.00*
Sony RX100 Mark VI /VIII Underwater Housing by Isotta
Sony RX100 Mark VI /VIII Underwater Housing by Isotta
The housing for Sony Cyber-shot RX100 Mark VI / RX100 Mark VII allows to capitalize on the camera full potential and to capture amazing pictures underwater. Product details An easy to use, highly professional product has been created through techniques and innovations gained from years of experience. The housing for  Sony Cyber-shot RX100 Mark VI / RX100 Mark VII perfect handling by means of an adjustable strips. Easy access to all key/main camera controls by means of clearly labelled laser-engraved longlasting buttons. An easy and quick release camera mounting plate allows the camera positioning; the back door has a large window for a fine camera display view and it is entirely detached from the front body to make easier the camera fitting. ONE HAND OPEN/CLOSE It's very easy to open and close Sony Cyber-shot RX100 Mark VI / RX100 Mark VII, without any efforts by the user thanks to the side helicoid screw and the bottom centered pins; the camera is placed easily into the housing on a sliding tray that keeps the camera robustly in place. A lever locks the tray safely inside the housing. The housing stands with great stability due to sturdy and wide rubber feet located on the bottom. PORT, CLOSE-UP AND WIDE-ANGLE LENSES The housing is equipped with a square port which allows the user to make use of the full range of the built-in camera zoom. The port is made of high quality materials to ensure a perfect image quality. This flat port is mounted via a secure bayonet mount to the housing. There is also an alternative port with an M67 thread that allows the usage of macro diopters (AS739). Alternatively, the standard compact port with M67 thread can be used, enabling the use of other M67 accessories but limits the range of the camera zoom (AS761) LIGHTING Sony Cyber-shot RX100 Mark VI / RX100 Mark VII own strobe lighting can be used fitting an outside diffuser on the porthole. For better performance with wide angle lenses, one or two external strobes can be connected by optical fiber using the adaptor included. CONSTRUCTION AND SAFETY Only the best materials are used to manufacture our housings such anodized aluminum which is anticorodal and thermo-coated and stainless steel. A longlasting product that requires easy and simple maintenance by the user. So small and so rich in technology! Dual high precision and quality O-Ring seals protect and ensure a perfect and secure watertight for all movable and / or removable parts; a red alarm for humidity/water inside the housing is powered by a battery replaceable by the user. Working depth is 100 metres. An hole positioned on the bottom allows to secure the housing for Sony Cyber-shot RX100 Mark VI / RX100 Mark VII with a line/strap. Different accessories can be fitted by means of an upper sliding tray and double threaded M6 holes and one 1/4W on the bottom. Controls ON/OFF of Sony Cyber-shot RX100 Mark VI / RX100 Mark VII Own camera strobe open/close Ergonomic camera focusing and shutter button for an easy use with gloves Shutter speed priority Lens aperture Exposure

€1,120.00*
LCD Magnifier attachment rails for NA-RX100III/RX100IV/RX100V
LCD Magnifier attachment rails for NA-RX100III/RX100IV/RX100V
The mounting rails are required to attach the LCD enlarger to the following Nauticam underwater housings: -NA-RX100III -NA-RX100IV -NA-RX100V -NA-RX100VI -NA-LX10/NA-RX100III NA-RX100IV NA-RX100V NA-RX100VI NA-LX10/15

€33.00*
on stock
Socket extension for 25032 HDMI bulkhead with M16 thread
Socket extension for 25032 HDMI bulkhead with M16 thread
M16 socket extension designed to be used with the NA25032 Custom HDMI M16 Bulkhead

€75.00*
on stock
M14 Vacuum Valve II
M14 Vacuum Valve II
Installing vacuum valve to housing Remove the plug of the M14 accessory port from the housing. Remove the cap from the vacuum valve. Tighten the vacuum valve to the housing with the tool provided. Building up vacuum Remove the cap of the vacuum valve. Connect the hand pump to the valve and pump several times until it reaches the target vacuum level. The LED light will turn flashing yellow while vacuum is building up, then steady green when the target vacuum level is reached. Attention: After the target vacuum is reached, i.e. steady green light, attach the cap back to the vacuum valve. It is recommended to leave the housing for at least 20mins to ensure it is sealed. If the LED light changes from steady green light to rapidly flashing yellow light, that means there is a leakage and please check every O-ring and conduct the vacuum test again. Please ensure that the cap is attached back to the vacuum valve before going underwater. Vacuum can be released by pushing the red release button. Attention: Please DO NOT attempt to go over the designated vacuum level, i.e. stop pumping when the LED turn green. Excessive vacuum level may lead to the malfunction of the camera and lens. Note: Although the vacuum indicator is designated to compensate for a certain amount of temperature variation, it is recommended to conduct the vacuum test in an environment where the temperature is stable. After set up, the meaning of the LED indicator in the housing: Flashing “Blue” light: Standby mode. The moisture alarm is active, and the system is ready for vacuum indication whenever a vacuum is detected. Flashing “Red” light with beeping sound:Moisture is detected. Flashing “Yellow” light: Some vacuum is detected, target vacuum level is not reached. Steady “Green” light: Target vacuum level is reached. Rapidly flashing “Yellow” light: Vacuum is dropping. (Will occur only after target vacuum level is reached) Rapidly flashing “Red” light: Vacuum is totally lost. Circuit stalled until switched off. (Will occur only after target vacuum level is reached)

€205.00*