Fujifilm X-T5 Underwater Housing by Nauticam

€2,950.00*

Free shipping

Delivery time: 10 days*

Product number: NA17159
HAN: NA-XT5

The X-T5, Fujifilm's latest APS-C mirrorless hybrid camera, adds a list of significant upgrades when compared to its predecessors.  Some of the most noticeable improvements are a new 40.2MP sensor with a processor 2x as fast as the X-T4.  As still/video hybrids become more popular, Fuji is offering a high-resolution camera that can record internal 6.2K 10 bit 4:2:2 video or 12 bit ProRes RAW externally over HDMI in addition to shooting an impressive 20fps of continuous stills.

FUJIFILM X-T5 Camera

The Fujifilm X-T5 features an APS-C CMOS 4 X-Trans 5 HR BSI 40MP Sensor. The X-T5 is powered by a new X Processor 5 which provides extremely fast performance and improved responsiveness. Improved in-body stabilization delivers up to a 7EV benefit which is a significant benefit for video shooters.  The intelligent 425 point hybrid autofocus tracking system is now sensitive down to -7EV allowing it accurately focus in extreme low light conditions.  

The X-T5 allows you to record oversampled 6.2K 30p or 4K 30p with a 1.23x crop factor or subsampled 4K 60p with the full width of the sensor.  When combined with the Atomos Ninja V, the X-T5 can output up to 6.2K 12 bit ProRes RAW.  Like the X-T4, the X-T5 also features HLG and F-Log capture to increase dynamic range, protecting highlights and shadows for editing. New to the X-T5 is F-Log2 which provides you with 13+ stops of dynamic range instead of just 12 stops with F-Log. 

Key Camera Specifications

  • 40MP APS-C X-Trans CMOS 5 HR BSI sensor
  • In-body image stabilization up to 7 EV benefit
  • 20 fps shooting with AF (15 fps with mechanical shutter)
  • 3.69M-dot OLED electronic viewfinder
  • 4K 60p, 6.2K 30p 4:2:2 10-Bit Videor
  • Internal F-Log and F-Log2 capture
  • Dual UHS-II SD card slots
  • Two-axis tilt rear screen

THE NAUTICAM NA-XT5 UNDERWATER HOUSING

Nauticam has supported all the previous X-T cameras and continues to create innovative and ultra-functional housings for this line with the NA-XT5 underwater housing.  The NA-XT5 features DSLR-style housing and port lock mechanisms as well as integrated ergonomic handles. The housing is designed with our Mission Control concept of placing the most important camera controls as close to the handles as possible to facilitate effortless and quick camera operation to ensure you don't miss the shot.

The NA-XT5 features thumb levers near both handles, with the left thumb lever actuating the playback function and the right thumb lever the AF-ON control. The housing includes two M14 and one M24 bulkhead openings to accommodate a variety of accessories.

The NA-XT5 uses the N100 Port System shared with the Fujifilm XH1, XT3 and XT4 system. A selection of port options are available for a variety of lenses.

PREMIUM PROFESSIONAL OPTICS

Nauticam's wide range of ports and in-house corrective optics are the perfect compliment to the NA-XT5's inherent flexibility. Built around the N100 Port System, the NA-XT5 supports a wide variety of X-mount lenses. In addition, there are several options available to use the groundbreaking WACP-1 and WACP-C wide-angle corrective lenses as well as the more compact and in-water removable WWL-1B and WWL-C.

For example, with the Fuji XF 18-55mm f/2.8-4 R LM OIS lens, the WACP-1 brings the original 75º field-of-view to an impressive 130º with sharper corners, an ~0" minimum focus distance and a more natural looking image than would be provided by a standard glass dome port.  For complete water contact lens compatibility, you can view the port chart here.  

HDMI 2.0

A large bore M24 bulkhead is located at the front of the housing for use with HDMI 2.0 or HDMI 1.4 (with a step-down adapter to M16) external monitors and recorders.  The X-T5 can output up to 6.2K 12 bit ProRes RAW over HDMI 2.0.  See the resources sidebar for additional details and recommended setups.

FLASH TRIGGERING

Reliable automatic flash exposure is available with the NA-XT5 and a variety of optically fired flashes, precisely reproducing the Fujifilm EF-X8 flash at a proportionally greater intensity. This system yields accurate automatic TTL flash performance – even in manual exposure mode – with no electrical sync cables to flood!

The NA-XT5 is also compatible with the Nauticam Mini Flash Trigger for Panasonic/Fujifilm (PN 26305). The Flash Trigger allows for rapid fire manual flash firing via fiber optic, with no camera battery drain.

The NA-XT5 comes fiber optic ready and accepts standard Sea & Sea style bushing connections. Nauticam Universal fiber optic cable system (PN 26216) for Inon, Sea&Sea strobes, provide exceptional light transmission for accurate TTL performance.

External Battery Pack

The NA-XT5 housing supports the use of an USB-C battery pack in order to greatly extend the time between battery swaps, and allowing the housing to remain sealed between dives.  The battery compartment at the bottom of the housing supports batteries up to 150mm(W) x 18mm (H) x 72mm (D).  Here is a known compatible battery with more to come:

Anker USB-C Portable Charger 10000mAh with 20W Power Delivery, 523 Power Bank (PowerCore 10K).  (180min of additional run time)

25303 USB-C to USB-C Right Angled Cable (in 0.5m length) is recommended for use with USB-C battery packs.  

INTEGRATED VACUUM CHECK AND LEAK DETECTION SYSTEM

The Nauticam vacuum check and leak detection system is pre-installed in the NA-XT5 as standard equipment. Combined with an optional M14 Vacuum Valve II (PN 25624), this monitoring system provides constant updates throughout the dive as to watertight integrity of the housing via a multi-color LED on the rear of the housing.

Body Material: aluminum
Camera System: Mirrorless (MIL)
Camera manufacturer: Fujifilm
Strobe connector: optical Sea&Sea
Tripod connection: Thread ¼
portsystem: N100
Weiterlesen
Technical data

  • Dimension (W x H x D): 332mm x 213mm x 121mm

  • Weight in air: 2.7kg 

  • Weight in water: negative 0.1kg (includes camera and battery)

  • Depth Rating: 100m

  • Port Mount: N100


Only the components of the item that are listed here will be delivered. Accessories and/or decoration shown in our images are for demonstration purposes only. In particular, we would like to point out that the purchase of an underwater housing does not include a camera and often not a port nor an external viewfinder. If you have any questions about the configuration of your system, do not hesitate to contact us.


Scope of delivery

  • Fujifilm X-T5 Underwater Housing by Nauticam

  • Padded Travel Case

  • CR2032 Battery for Vacuum System

  • Spare 90122 main O-ring, removal tool and lubricant

  • 2x Handles with mounting balls

  • Set of Allen Keys

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.

HDMI 2.0

Atomos Ninja V Underwater housing by Nauticam
With more cameras offering high quality HDMI video output, the Atomos Ninja V steps in, not only as a stunning monitor but also as a recorder of 4K 60p 4:2:2 10-bit video to on-board SSD drives in edit-friendly ProRes or Avid formats. The Nauticam NA-Ninja V, when used with supported housings and cameras, allows for the connection of the Ninja V over HDMI 2.0 in addition to providing easy access to the Ninja V controls underwater. Atomos Ninja V The Atomos Ninja V is an exceptional monitor, featuring a bright 1000 nit 10-bit HDR 5.2" screen that can display over 10 stops of dynamic range with compatible cameras. The monitor includes a variety of exposure and focus assist tools to insure your footage is properly exposed with critical focus. In addition to being an extremely capable monitor, the Ninja V is also a recorder. When used with compatible cameras over HDMI 2.0, the Ninja V can record 4K at 60p in 10-bit 4:2:2 ProRes or DNxHR formats to Atomos AtomX SSDmini solid state drives. With a 1TB SSDmini drive, the Ninja V can record up to 150 minutes of 4K video. EXPOSURE TOOLS  The Ninja V exposure guides include a Waveform for luminance, RGB Parade for color balance, and Vector Scope for hue and saturation. These tools, especially useful for the underwater filmmaker, allow accurate and fast judging of exposure, even in the most uncooperative lighting scenarios. Even when recording Log or HDR footage, using Rec.709 or HLG monitoring displays the video on the screen adjusted to the levels of the chosen standard.. FOCUS TOOLS Critical focus can be achieved using various peaking tools. Focus Peaking Color displays the original color image with the sharpest areas outlined in a selectable color. Focus Peaking Mono provides the same overlay but on a monochrome image. Focus Assist Outline shows only the false color outline on a black background of the sharpest Areas.   THE NAUTICAM NA-NINJA V UNDERWATER HOUSING The Nauticam NA-Ninja V builds on the strong foundation Nauticam has built with previous Atomos monitor/recorder housings but is built around the new M28 large-bore bulkhead that supports HDMI 2.0. The Ninja V is easily mounted in the housing, dropping in without trays or other mounting accessories and is held in place by two rotating locking levers. The Ninja V features both an HDMI 2.0 input as well as an output and the NA-Ninja V supports both as well. With dual M28 bulkheads, a second HDMI cable can be run to another monitor. The Ninja V allows for the application of. cube format 3D LUTs to this output signal. The NA-Ninja V supports up to the NP-F970 size battery which provides up to two hours of run time. A CR-2032 battery powers the vacuum check and leak detection system. When used with the included Vacuum Valve, the system gives real-time feedback about the watertight integrity of the housing through an easily visible multi-color LED on the top of the housing. Access to the touchscreen controls of the Ninja V are handled via a series of buttons and a selector knob beneath the screen of the housing including PLAY, REC, MON, RGB, PEAK and the Muti-Selector Lever.  

€2,435.00*
HDMI 2.0 Cable M24D1R205-M28A1R170
This HDMI 2.0 cable is suitable for connecting the NA-XT3 and NA-R3/R5/R5C/R6/R7 or OM1 housing to the Ninja V underwater housing from Nauticam.

€295.00*
on stock
M24 Adaptor for HDMI 2.0 Cable (to use with 25087 with NA-A7RIV+SIII)
M24 Adaptor for HDMI 2.0 Cable (to use with 25087 with NA-A7RIV+SIII)

€55.00*

Ball heads

Monitor Housing Mounting Adaptor
This kit replaces the standard handle top-mounting plates to allow for the mounting of the Nauticam Monitor Housings on the Fitting camera housings.

€190.00*
on stock
Strobe mounting ball for cold shoe
Standard 1" ball mount that attaches to the cold-shoe mount of compatible housings. Specially designed metal plate prevents the ball mount from slipping off even if it becomes slightly loose.

€48.00*
M5 Strobe Mounting Ball for Housing
Strobe mounting ball that attaches to M5 threaded mount on select housings. Installation Guide: Nauticam M5 & M10 Strobe Mounting Balls from Nauticam on Vimeo.

€27.00*
45° viewfinder for Nauticam SLR housing
Nauticam's improved 45°angle viewfinder is the perfect complement to your housing, providing a bright, clear and undistorted 1:1 image of the camera's viewfinder, as well as a 45°viewing angle. The viewfinder can be rotated to any angle, which is important when shooting in a vertical orientation. The 45º viewfinder also provides more clearance for your regulator, allowing for a more comfortable viewing position. Introducing the NAUTICAM 45° VIEWFINDER . Long- or short-sightedness? The viewfinder features an external knob for vision compensation; easy diopter adjustment can now be made underwater without disassembling the viewfinder . Proven design The body is made of anodised aluminium and all lens elements and prisms in the viewfinder are precision ground and multi-layer coated to ensure optimum light transmission and no distortion . INSTALLING THE SEARCHER . With Nauticam housings, it is easy to switch between the standard 0.66x and Enhanced 45° viewfinder, in most cases without tools or adapters. With optional adapter kits, it can also be adapted to the housings of Ikelite, Aquatica, Sea & Sea and Nexus. Note: Because some newer camera models have higher magnifications and a decreasing eye point, there may be a slight reduction in view from edge to edge when using a Nauticam magnification viewfinder. The extent varies, but the benefits of the magnification viewfinder remain.

€1,210.00*
on stock
M14 Vacuum Valve II
Installing vacuum valve to housing Remove the plug of the M14 accessory port from the housing. Remove the cap from the vacuum valve. Tighten the vacuum valve to the housing with the tool provided. Building up vacuum Remove the cap of the vacuum valve. Connect the hand pump to the valve and pump several times until it reaches the target vacuum level. The LED light will turn flashing yellow while vacuum is building up, then steady green when the target vacuum level is reached. Attention: After the target vacuum is reached, i.e. steady green light, attach the cap back to the vacuum valve. It is recommended to leave the housing for at least 20mins to ensure it is sealed. If the LED light changes from steady green light to rapidly flashing yellow light, that means there is a leakage and please check every O-ring and conduct the vacuum test again. Please ensure that the cap is attached back to the vacuum valve before going underwater. Vacuum can be released by pushing the red release button. Attention: Please DO NOT attempt to go over the designated vacuum level, i.e. stop pumping when the LED turn green. Excessive vacuum level may lead to the malfunction of the camera and lens. Note: Although the vacuum indicator is designated to compensate for a certain amount of temperature variation, it is recommended to conduct the vacuum test in an environment where the temperature is stable. After set up, the meaning of the LED indicator in the housing: Flashing “Blue” light: Standby mode. The moisture alarm is active, and the system is ready for vacuum indication whenever a vacuum is detected. Flashing “Red” light with beeping sound:Moisture is detected. Flashing “Yellow” light: Some vacuum is detected, target vacuum level is not reached. Steady “Green” light: Target vacuum level is reached. Rapidly flashing “Yellow” light: Vacuum is dropping. (Will occur only after target vacuum level is reached) Rapidly flashing “Red” light: Vacuum is totally lost. Circuit stalled until switched off. (Will occur only after target vacuum level is reached)

€205.00*
on stock
45 °Viewfinder Unit II for Nauticam by INON
This viewfinder can be used at all DSLR Underwater Housings by Nauticam. It also fits at: Sony: α1 / A9 / A7RV / A7IV / A7SIII / α2020 / A7RIV / A7RIII / A7II / A7 Nikon: Z9 / Z7 / Z7Ⅴ / Z7II / Z50 Canon: R5C / R3 / R5 / R6 / R7 / EOS R Fujifilm: XT4 / XT3 / GFX100S / GFX100 / GFX50S Panasonic: NA-S1R, NA-S1H Olympus: EM1X The viewfinders are bundled with dedicated tool to remove preinstalled Nauticam viewfinder and install INON viewfinder for self installation. You can refer to instruction movie in addition to the user manual. If you do not have confident on self installation, please contact us for advice. Olympus: NA-EM1X

€599.00*

Flash Trigger

on stock
Mini Flash Trigger for Panasonic/Fujifilm/Canon
Nauticam flash trigger units allow the use of robust and reliable fiber optic cables to fire external strobes, providing dependable, rapid-fire flash triggering over fiber. Flash triggers allow motor drive shooting sequences, perfect for fast moving action. This flash trigger plugs into the compatible camera hotshoe and provides an optical signal for fast, continuous strobe firing. Automatic TTL flash control is not supported by this flash trigger, flash power is set manually on the strobe itself. Compatible with NA-GH4 NA-XT1 NA-XT2 NA-XT3 NA-XT5 NA-XH1 NA-R6II NA-R7

€295.00*

Spare parts

on stock
M14 plug for housing (with o-ring)
Plug for M14 bulkhead on underwater housings.

€23.00*
on stock
Strobe Mounting Ball for Handle
Attaches to housing handles providing a standard 1" ball mount.

€30.00*
on stock
Housing o-ring 90122
Spare housing O-ring for the following Nauticam underwater housings: NA-7D NA-80D NA-D7100 NA-D7200 NA-D7500 NA-GH5 NA-GH6 NA-G9 NA-REDLT NA-Z7II/Z6II Furthermore, this O-ring also fits N200 ports from Nauticam.

€22.00*
on stock
Spare O-Rings for 1 inch ballheads
Spare O-rings for 1-inch ball heads in the popular Nauticam blue.

€16.00*

HDMI 1.4

on stock
Standard HDMI Bulkhead (M16)
Standard HDMI Bulkhead with M16 thread for Housing M16 socket.

€145.00*
Underwater Monitor WED-7 Pro
The WED-7 Pro is a professional HD monitor specially designed for underwater photographer. The product is made of aluminum alloy, with carbon-fiber trim panels and delicate stainlesssteelchrome-plated buttons. It is High-end and professional product. The underwater monitor uses a full HD FHD display, plays for 4K HDMI input and outout,and is configuredwith a variety of auxiliary tools, so that the photographer is more freely and with ease in shooting. Professional auxiliary shooting function: The product has a variety of professional shooting functions, such as: brightness histogram, audio column, auxiliary focus, false color, exposure prompt, monochrome display, nine grid, square, etc., all can better help the photographer effectively monitor and control the picture to the process of shooting and creating works. Long back-up life: The product is powered by two 18650 lithium batteries, the longest working time can be up to 3.5 hours, and the product has a battery indicator light, so that the photographer can observe the battery power at any time. 4K signal transmission: The product supports 4K HDMI input and output, and high-definition pictures of the camera can be displayed on the monitor in real time through 4K signal transmission of HDMI. 7-inch FHD: The product features a 7-inch full HD screen with 1920x1200 resolution and 440PPI pixel density, as well as 500CD /m² high brightness and 1200:1 high contrast. Ultra-wide viewing Angle: The choice of IPS display has an ultra-wide viewing Angle of 160°, which allows the photographer to easily get a clear picture when adjusting the position. True color: The product uses the trustworthy Rec.709 high-definition color standard in the professional field, and accurately restore the color without distortion or color bias, it shows the real image. Hood: The product design has a professional hood, so that the photographer can get the ideal viewing effect when using in the outdoor bright light. Excellent image processing engine: the product is matched with an independent image processing engine, which improves the light and dark effect and contrast of the picture, so that the picture quality is more exquisite. Excellent deep waterproofing effect: UP to 80m/263ft IP68 waterproofing grade: professional waterproofing design, full process technology and quality control, as well as real simulation of various deep water conditions of pressure testing.

€1,568.00*
on stock
HDMI (D-D) Cable in 200mm Length
This 200mm long HDMi (D-D) cable is designed for the internal connection from the HDMI bulkhead of the housing to the Fujifilm XT2/HX1/A6400 camera HDMI output.

€81.00*
on stock
WED-5 Underwater Monitor
5-inch HD Underwater Monitor by Weefine A lightweight made of aluminium that is travel-friendly and practical. This is how the WED-5 underwater monitor from Weefine presents itself. With a brightness of just under 500 nits and 16.7 million colours, it allows you to fully assess your shots even in the water. The monitor housing is milled from aluminium in the highest precision and then protected with a solid surface anodisation. This makes the monitor resistant to salt water and overheating.

€998.00*

Tripod

Stativplatte für NA-A7S/GH4/A7II/GH5/A9
Stativplatte, die an der Unterseite des Gehäuses befestigt wird und drei Standard 1 Zoll Kugelköpfe für Stativbeine oder anderes Zubehör bietet. HINWEIS: Eignet sich nicht für die Cinema-Gehäuse von Nauticam

€580.00*
on stock
Mounting Ball Set for Tripod
This kit allows for the secure mounting of industry standard 1" ball mounts directly onto the NA-A9 housing that provides a low-profile attachment point for tripod legs or accessory light arms. Compatible with Nauticam Housings: NA-A9 NA-A7RIII NA-BMPCC NA-XT3 NA-RIV NA-Z50 NA-XT5

€77.00*
Universal Quadra-Pod Plate
  A stable filming platform is crucial to capturing many underwater scenes. While larger cinema systems such as the NA-C200, RED Komodo and RED DSMC2 housings feature integrated stabilization options, many Nauticam DSLR and Mirrorless systems now have an option for a similar level of support with the Universal Quadra-Pod Plate. INTRODUCING UNIVERSAL QUADRA-POD PLATE FOR NAUTICAM HOUSINGS   Featuring a flexible housing mounting position, the Quadra-Pod attaches via the integrated threaded mounts on the bottom of supported housings with large knurled thumb screws. The Quadra-Pod can be used in either Quadrapod or Tripod configurations. QUADRAPOD CONFIGURATION TRIPOD CONFIGURATION There are five separate positions with which the Quadra-Pod can be mounted relative to the housing extending either more towards the front or rear of the housing. This flexible positioning allows for the use of various ports and accessories without interference. Four 1" ball mounts can be used to attach a variety of leg options and configurations such as Nauticam double ball arms. The Nauticam Universal Quadra-Pod gives DSLR and Mirrorless users a flexible solution to achieving a more stable filming position underwater while maintaining the low profile that makes these systems appealing.

€375.00*