Bayonet Holder II for 90mm Float Arm
Photos show accessories that are not part of your order. Only the content of the tab "What's in the box" is relevant.
on stock
Product number:
NA72243
Available stock:
1
This adapter mounts to the 90mm buoyancy arms and provides a secure attachment point for a Nauticam Bayonet mount or Bayonet mount II attachment lens.
| Attachment lens thread: | Nauticam Bayonett II |
|---|---|
| Body Material: | aluminum |
Technical data
- Material: aluminium
- suitable for buoyancy arms with 90 mm diameter
- Nauticam bayonet system II (blue lever)
Scope of delivery
Single Bayonet Holder II for 90mm Float Arm by Nauticam
Login
There aren't any asked questions yet.
on stock
Macro to Wideangle Lens 1 (MWL-1)
€2,050.00*
The Nauticam MWL-1 is a revolutionary concept! It is a wet-mounted ultra wide lens (meaning it can be attached and removed underwater) designed to be used with a 60mm full frame equivalent macro lens that results in an ultra-wide 150º field of view. The MWL-1 can focus from the lens' front element to infinity. Ultra wide angle and macro perspectives are now available on the same dive - even with full frame DSLR systems.
MACRO TO WIDE ANGLE LENS 1 (MWL-1)
The MWL-1, similar to other Nauticam underwater optics is made from precision ground optical glass with advanced anti-reflective coatings to eliminate glare and internal reflection.
MACRO AND WIDE WITH ONE CAMERA LENS!
For many photographers, especially those moving up to an SLR or mirrorless system, there is trepidation at being locked in to either macro or wide angle on a dive. With compact systems that featured wide zoom range lenses that, when paired with corrective optics, could allow for wide angle or macro on the same dive. When moving to an interchangeable lens and port system you would previously have been committed to either wide angle or macro for a given dive.
CLOSE FOCUS WIDE ANGLE IMPACT
With the introduction of the MWL-1, not only can you switch between wide angle and macro on the same dive you can also capture unique close focus wide angle images of macro subjects. This technique works best when a macro subject can be placed very close to the lens where exaggerated perspective makes it pop out from an ordinary background.
The MWL-1 excels at smaller apertures and full-frame shooters will get optimal results at F16 or higher.
MULTIPLE MOUNTING OPTIONS
With two mounting options, Nauticam's bayonet system or one of two available flip mounts, the MWL-1 can be quickly engaged or disengaged or even swapped for an CMC-1, going from wide angle to super macro in seconds.#
on stock
Wet Wide Lens 1B with float collar (WWL-1B) by Nauticam
€1,395.00*
The next generation of WWL-1 is here! The WWL-1B features the same stunningly sharp optics as the WWL-1, but it now includes an integrated aluminum buoyancy collar to make it nearly neutral in water. The WWL-1 and now WWL-1B are still the highest quality wet-changeable underwater wide-angle conversion optics ever made, featuring unmatched contrast, overall sharpness, corner sharpness, and clarity. The design is truly full zoom through, allowing zoom to to be used as a tool for framing, and removable in water for close-up and macro shots.
INTRODUCING WET WIDE LENS 1B (WWL-1B) 130 DEG. FOV WITH COMPATIBLE 28MM LENSES (INCL. FLOAT COLLAR)
The WWL-1 is the highest quality wet-changeable underwater wide-angle conversion optic ever made, featuring unmatched contrast, overall sharpness, corner sharpness, and clarity. The design is truly full zoom through, allowing zoom to to be used as a tool for framing, and removable in water for close-up and macro shots.
NA-GX7 & Nauticam WWL-1 Lens Showreel from Nauticam on Vimeo.
Breakthrough lens design
Every Nauticam lens is a "clean slate" design. These optical systems are engineered entirely as underwater corrective and conversion optics, and not adaptations of in air designs. The process isn't an easy one, but the images captured by WWL-1B and previous Nauticam optical designs prove the effort is well spent. Uncompromised Optical Quality
WWL-1B is constructed of 6 precisely ground elements of highly refractive optical glass. All internal elements are coated with a broadband anti reflective coating to keep flare and internal reflections to an absolute minimum.
WWL-1 besteht aus 6 präzise geschliffenen Elementen aus hochbrechendem optischem Glas. Alle Innenelemente sind mit einer breitbandigen Anti-Reflexionsschicht beschichtet, um Streulicht und Innenreflexionen auf ein absolutes Minimum zu reduzieren.
Zoom to frame
WWL-1B is a full zoom through lens, performing well through the entire zoom range of popular compacts and Micro Four Thirds systems with power zoom lenses. This feature distinguishes this lens from all others on the market, which are designed to be used at a single focal length. The ability to be used with zoom makes WWL-1 extremely versatile! A touch of zoom can be used to crop a subject in camera, or for close-up shots without removing the lens.
Stunning field of view
130 degrees of glorious wide angle coverage, and even a bit wider if your camera system allows it! This is a field of view that sits between the popular full frame fisheye lenses (180 degrees diagonal) and ultra wide rectilinear zooms (approximately 110 degrees). This coverage angle was targeted from the very beginning as an ideal coverage angle for a wide variety of underwater imaging scenarios. Big animals, close focus wide angle shots of reef dwelling creatures, and even mid-range fish portraits are all within the range of WWL-1B.
Incredible sharpness and contrast
The cutting edge optical design employed in WWL-1 results in extremely high overall sharpness, contrast, and edge sharpness. The design is optimized for the high resolution sensors of today, as well as the even higher resolutions sensors of tomorrow.
Close focus
The ability to focus close is key, and WWL-1B does amazingly well. With all compatible systems at wide angle the lens is able to focus on the front of its dome lens element, maximizing the impact of even small subjects. Amazingly, with the Panasonic 14-42 Power Zoom, the lens is still able to focus on the front of the dome port when zoomed to full telephoto! The best macro images will always be obtained by removing WWL-1 and mounting a macro converter (such as CMC or SMC), but in situations where that is difficult close-up shots can still be obtained without removing the wide angle conversion lens.
Compatibility
Wet lenses have traditionally been an accessory geared toward compact cameras, but Nauticam set out from the very beginning to support a wider range of systems, with larger sensor sizes.
Most impressive is the outstanding performance available with the full frame Sony A7 series cameras using the Sony 28mm /2 Prime lens. In our tests, this combo out-performed all of the Sony wide angle lenses behind dome ports, and is especially well matched to the demanding 42 megapixel sensor in Sony A7R II.
Micro four thirds systems used with power zoom lenses are another compelling combination. 130 Degrees on the wide end, with a 3x Zoom Range, and close focus on the front of the dome. This combination is wider, sharper, and has less distortion than the Panasonic 7-14 F/4 and Olympus 7-14 F/2.8 lenses behind a dome port. Twist off the lens, and snap on a CMC for high powered macro photography, capturing an image area 22mm (just under 1?) wide! The full range of compatible systems is listed below.
Simple bayonet mounting
A new bayonet mounting system has been designed to accompany the WWL-1B release, and maximize ease of use. Lenses snap into place, and are securely locked. A red locking tab releases the lens for removal, and lens holders provide storage for lenses on a strobe arm when not in use.
The bayonet mount system has been designed to incorporate vents that quickly flood the space between lens and camera, washing away air bubbles.
on stock
Wet Wide Lens C (WWL-C) by Nauticam
€1,030.00*
The next evolution of the WWL-1 is here! As the versatility and capability of compact cameras increases, Nauticam has developed a smaller and lighter water contact wide angle lens tailored specifically to the compact camera user. Designed from the ground up to match the compact camera's form factor without sacrificing optical quality, the WWL-C is a powerful addition to not only Nauticam compact housings but also, via an optional adapter, to those from other manufacturers such as the Olympus TG-6 and their PT-059 housing.
Introducing Wet Wide Lens for Compact Cameras (WWL-C)
With the original Wet Wide Lens, the WWL-1, Nauticam used computer aided lens design software to create an underwater-specific corrective lens that allowed for an unprecedented 130º field-of-view with full zoom-through optics and extreme close focus capabilities. The WWL-1 wasn't just for higher end cameras that already benefitted from interchangeable lenses to attain better image quality, the WWL-1 was designed to work with a variety of cameras that featured a 28mm equivalent lens including compacts and micro-four thirds.
Delivering a stunningly sharp 130º field-of-view with 24mm equivalent lenses, the WWL-C also features zoom-through capable optics.** The WWL-C features a pre-installed metal buoyancy collar and a non-removable metal dome shade.
The WWL-C will also feature an updated quick-release Bayonet Mount. Lenses that feature the new Bayonet Mount II will not be compatible with previous Bayonet Mount adapters but all Bayonet Mount lenses will be able to be used with the new Bayonet Mount II Bayonet Mount Adapters without modification.
In the sidebar you will find a list of anticipated housing compatibility along with the supported focal-length range as well as the necessary port configuration for the Bayonet Mount II standard.
Compact Housings
The WWL-C is designed around the 24mm focal length which is commonly the widest focal length for fixed-lens compact cameras. While the WWL-1 was also able to deliver 130º field-of-view it required that the camera's lens be zoomed in slightly to 28mm. With the WWL-C, there's no more need to zoom to avoid vignette! This also means that more of the camera's zoom range is available.
The new NA-TG6 (17816) for the Olympus Tough TG-5 and TG-6 cameras is WWL-C ready out-of-the-box as it comes with the new Bayonet Mount II converter pre-installed. With the TG-5 and TG-6 the WWL-C allows for use of the 25-100mm zoom range!
For those compact housings with the N50 interchangeable port system, there are new short ports with Bayonet Mount II adapters pre-installed.
Configurations for some of the latest models:
Sony RX100 VII in the NA-RX100VII use (38705) N50 Short Port 17 with Bayonet Mount with a usable zoom range of 24-30mm
Canon PowerShot G5X Mark II in the NA-G5XII use (38703) N50 Short Port 25 with Bayonet Mount with a usable zoom range of 24-50mm
Panasonic Lumix DMC-LX100 II in the NA-LX100II use (38704) N50 Short Port 22 with Bayonet Mount with a usable zoom range of 24-30mm
Complete configurations for all supported models can be found on the Port Chart for the WWL-C.
Mirrorless M4/3 Housings
The WWL-C is not just for compact cameras! The Panasonic LUMIX G VARIO 12-32mm F3.5-5.6 ASPH. MEGA O.I.S. lens, when used with (36165) N85 Power zoom macro port 29 and the (83250) M67 to bayonet converter II allows for the use of the full 12-32mm zoom range.
Mirrorless APS-C Housings
Sony, Canon, Nikon and Fuji Mirrorless APS-C can all benefit from the WWL-C. The Sony SELP1650 E PZ 16-50mm F3.5-5.6 OSS offers excellent performance from 17-50mm with only slight vignetting at 16mm. The compact size of the WWL-C works in tandem with the low profile series of Nauticam housing for Sony's E-mount APS-C series of cameras such as the NA-A6600 and NA-A6400 to provide a travel-friendly package that doesn't compromise optical quality.
Adapter for Olympus PT058/PT059 Housings
Using the WWL-C with the Olympus PT058 and PT059 Housings for their Tough TG-5 and TG-6 cameras is now also an option with the (83256) Bayonet Mount Converter for Olympus PT058/059.
on stock
Bayonet Mount Adaptor for SMC/CMC
€55.00*
In order to use the CMC/SMC with the Bayonet Mount System this adapter is required. It threads onto the CMC or SMC.
Similar products
Bayonet Lens Holder for Inon Float Arms
€85.00*
This adapter mounts to INON arms and provides a secure attachment point for a Bayonet Mount or Bayonet Mount II optic.
on stock
Double Bayonet Holder II for Ø90 Float Arm
€100.00*
This adapter mounts to Nauticam 90mm float arms and provides a secure attachment point for two Bayonet Mount or Bayonet Mount II optics.
on stock
Bayonet Mount II Lens Holder for Arm
€85.00*
This adapter mounts to standard arms and provides a secure attachment point for a Bayonet Mount or Bayonet Mount II optic.
on stock
Bayonet II Holder for 70mm float arms by Nauticam
€65.00*
This adapter mounts to 70mm float arms and provides a secure attachment point for a Bayonet Mount or Bayonet Mount II optic.