MDX-R5 U/W HOUSING FOR CANON EOS R5 Revised ergonomic design, improved safety features and eye-catching exterior. The new MDX series housings are now upgraded with more standard features to ensure better handling and greater protection for your camera Features Equipped with Grip plus,SA8 Fixed Ball Bases The new MDX R5 is the perfect complement to Canon`s new mirrorless R5 camera. The MDX-R5 is rich in features with all controls ergonomically designed to maximize camera operation. All major camera functions can be accessed from the grip handles through thumb or finger movement without releasing your grip. Sea&Sea Optical Converter and S&S manual flash trigger compatibility, port locking system plus removal and attaching of lenses while camera is still in housing. Compatible with both native RF lenses and all EF lenses (with mount). In addition, a 24mm port has been included to accommodate HDMI 2 cables for connection to an external video monitor to realize the full potential of the cameras ultra-high video capabilities. A built-in Leak Sensor and a bulkhead for external vacuum sensor provides double protection and increased peace of mind for your camera equipment while diving. Many more features are available on the MDX R5 to help you gain full potential of all the R5`s features and make your underwater imaging experience unforgettable. MDX-R5 with YS-D3 Strobes For better noticeability, controls are partially colored with yellow. All major controls for camera function can be easily operated without releasing your grip on the handle, providing stability and assurance during all imaging situations   Compatible with the Sea&Sea, “Manual Flash Trigger” (optional). and Sea&Sea Optical TTL Coverter. 24mm bulkhead allows connection of 3rd party HDMI 2 cable for attaching an external video monitor Bulkhead will accept the S&S Vivid housing Vacuum Leak Sensor, or an optional 16mm step down converter is available to fit third party vacuum sensors Compatible with all the DX (NX) series ports. The camera can be removed from the housing easily even if a lens with large diameter such as the RF15~35 f2.8 is mounted on the camera without removing port from the housing enabling you to replace battery and lens with ease. MDX-R5 Other Features The Port lock prevents the port from turning or loosening and the Port Lock lever is specifically located to avoid being unlocked accidentally.  The housing is equipped with a lens-lock release button which makes it possible to change lenses easily, without opening the housing. Pulling out the Focus/Zoom Dial gives sufficient room inside the housing to easily accommodate larger diameter lenses. All controls have luminescense stickers which glow in a dark enbironment for better visibility of controls. Equipped with Optical Viewfinder 0.5x as standard. Other optional viewfinders such as the VF180 1.2x,VF45 1.2x and Optical Viewfinder 0.66x,0.8x can be used.?Some vignetting may occur when the VF180 1.2x is mounted on housing, the upper part of the camera's viewfinder cannot be viewed dus to vignetting. Sync Cord 2-pin Connector enables use of conventional hardwired Sync cable (Manual mode only). Equipped with two sacrificial zinc diodes (one on the fornt case and the other on the rear) to prevent electrolysis damege. Built-in leak sensor immediately alerts alerts you to water ingress.Tripod screw mount is located on the center underside of the housing. Equipped with an under guard to protect housing from scratches and abrasion

MDX-R5 - U/W HOUSING FOR CANON EOS R5 Revised ergonomic design, improved safety features and eye-catching exterior. The new MDX series housings are now upgraded with more standard features to ensure better handling and greater protection for your camera Features Equipped with Grip plus,SA8 Fixed Ball Bases The new MDX R5 is the perfect complement to Canon`s new mirrorless R5 camera. The MDX-R5 is rich in features with all controls ergonomically designed to maximize camera operation. All major camera functions can be accessed from the grip handles through thumb or finger movement without releasing your grip. Sea&Sea Optical Converter and S&S manual flash trigger compatibility, port locking system plus removal and attaching of lenses while camera is still in housing. Compatible with both native RF lenses and all EF lenses (with mount). In addition, a 24mm port has been included to accommodate HDMI 2 cables for connection to an external video monitor to realize the full potential of the cameras ultra-high video capabilities. A built-in Leak Sensor and a bulkhead for external vacuum sensor provides double protection and increased peace of mind for your camera equipment while diving. Many more features are available on the MDX R5 to help you gain full potential of all the R5`s features and make your underwater imaging experience unforgettable. MDX-R5 with YS-D3 Strobes For better noticeability, controls are partially colored with yellow. All major controls for camera function can be easily operated without releasing your grip on the handle, providing stability and assurance during all imaging situations  Compatible with the Sea&Sea, “Manual Flash Trigger” (optional). and Sea&Sea Optical TTL Coverter. 24mm bulkhead allows connection of 3rd party HDMI 2 cable for attaching an external video monitor     Bulkhead will accept the S&S Vivid housing Vacuum Leak Sensor, or an optional 16mm step down converter is available to fit third party vacuum sensors   Compatible with all the DX (NX) series ports. The camera can be removed from the housing easily even if a lens with large diameter such as the RF15~35 f2.8 is mounted on the camera without removing port from the housing enabling you to replace battery and lens with ease. MDX-R5 Other Features The Port lock prevents the port from turning or loosening and the Port Lock lever is specifically located to avoid being unlocked accidentally.  The housing is equipped with a lens-lock release button which makes it possible to change lenses easily, without opening the housing. Pulling out the Focus/Zoom Dial gives sufficient room inside the housing to easily accommodate larger diameter lenses. All controls have luminescense stickers which glow in a dark enbironment for better visibility of controls. Equipped with Optical Viewfinder 0.5x as standard. Other optional viewfinders such as the VF180 1.2x,VF45 1.2x and Optical Viewfinder 0.66x,0.8x can be used.?Some vignetting may occur when the VF180 1.2x is mounted on housing, the upper part of the camera's viewfinder cannot be viewed dus to vignetting. Sync Cord 2-pin Connector enables use of conventional hardwired Sync cable (Manual mode only). Equipped with two sacrificial zinc diodes (one on the fornt case and the other on the rear) to prevent electrolysis damege. Built-in leak sensor immediately alerts alerts you to water ingress.Tripod screw mount is located on the center underside of the housing. Equipped with an under guard to protect housing from scratches and abrasion    

Its superior ergonomic design and standout range of optional accessories help you capture those optimal moments with the best image Quality. Much lighter than previous housings. Using unprecedented precision machining, the dimensions of the housing are similar to those of the camera. In addition, the revised internal design has also helped reduce weight. The MDX-D850 is approximately 11% (350g/12.3oz) lighter than the previous MDX-D810 housing. All the dials have a spring (damper) to prevent slip of the controls All the dials have a spring (damper) to prevent slip of the controls even if the dimensions of the cameras are slightly different or even if gears or other parts wear out to some extent.  Leak Alarm Unit as standard equipment The Leak Alarm Unit, which was previously available as an option, is now included as standard equipment. It is effective not only for early detection of underwater flooding accidents, but also for protection of equipment by checking its waterproof performance before entry. CR2032 lithium battery included. Optical YS Converter/N1 can be built into the housing Optical YS Converter/N1 can be built into the housing Compatible with Optical YS Converter/N1 for MDX housing which converts the camera’s hot-shoeTTL signal to a light signal. Both TTL and manual strobe modes can be used and controlled from the housing using a Fiber-Optic Cable II. * Fiber-Optic Cable ll is required when using the Optical YS Converter. * Serial numbers 124000274 and above are compatible with the Nikon D850. Serial numbers below 124000274 are not compatible. New firmware and/or conversion of the converter will be required. Other Features The Port Lock prevents the port from turning or loosening and the Port Lock lever is specifically located to avoid being unlocked accidentally. The housing is equipped with a lens-lock release button which makes it possible to change lenses easily, without opening the housing. The camera’s diopter adjustment dial can be operated from outside the housing. This feature is useful when two or more people with different eyesight use the housing. Pulling out the Focus/Zoom Dial gives sufficient room inside the housing to easily accommodate larger diameter lenses. All controls have luminescence stickers which glow in dark environment. Equipped with the Optical Viewfinder 0.5x as standard. Other optional viewfinders such as the VF180 1.2x, VF45 1.2x and Optical Viewfinder 0.8x can be used. *When the VF180 1.2x is mounted on the MDX-D850 housing, the lower part of the camera's viewfinder (where the shooting data is displayed) cannot be viewed due to vignetting. Sync Cord 2-pin Connector enables use of conventional hardwired Sync cable (Manual mode only). Accessory port enables use of Leak Sentinel (vacuum sensor). Equipped with two sacrificial zinc diodes (one on the front case and the other on the rear) to prevent electrolysis damage. Built-in leak sensor immediately alerts you to water ingress. Tripod screw mount is located on the centre underside of the housing.

Compact design. Due to the compact design and light weight of the Z7 / Z6 camera, the housing has been adapted accordingly to enhance these features. Compared to the SLR MDX-850 camera body, the MDX-Z7/Z6 is 100g lighter on land.  Ports and lens rings for the MDX series SLR housings can be used. With the FTZ adapter and the ports and lens rings for the MDX series bodies, you can use F-mount lenses. Compatible with the YS optical converter/N1. TTL flash photography possible. An optional optical YS converter, which converts the camera's hot shoe TTL signal into an LED light signal, is compatible with the housing. Manual flash photography is also possible. Designed for F-mount lenses with the FTZ mounting adapter and Z-mount lenses. The focus/zoom gear has two gears, one for F-mount lenses with the FTZ mounting adapter and the other for Z-mount lenses. The MDX-Z7 is designed to accommodate various Z-mount lenses that will be available soon. The upper control panel of the camera is visible. A window for the upper control panel of the camera is also integrated. As the brightness of the camera's upper control panel has increased, visibility is now significantly improved.  The port lock prevents the port from turning or coming loose, and the port lock lever is specially positioned to prevent accidental unlocking. The body is equipped with a lens release button that allows for easy lens changes without opening the body. Pulling out the focus/zoom wheel provides enough space inside the housing to easily accommodate larger diameter lenses. The camera's diopter adjustment knob can be operated from outside the housing. This feature is useful when two or more people with different eyesight use the housing. All controls have luminescent stickers that glow in dark environments. Equipped with the 0.5x optical viewfinder as standard. Other optional viewfinders such as the 0.66x and 0.8x optical viewfinders can be used. When the VF45 and VF180 1.2x are mounted on the body, the corners of the camera's viewfinder cannot be viewed due to vignetting.  The 2-pin sync cable connector allows the use of a conventional hard-wired sync cable (manual mode only). Equipped with two sacrificial zinc diodes (one on the front and the other on the back) to prevent electrolyte damage.

State-of-the-art housing for the full-frame mirrorless Nikon Z7II/Z6II/Z7/Z6 camera. Compact, compatible with the Optical YS Converter and ergonomically designed. Compact design The housing of the Z7/6 camera, as well as the Z7/6 II, takes advantage of the compact design and light weight and has been designed accordingly to enhance these features. Compared to the MDX-850 SLR camera body, the MDX-Z7/6 is 100 grams lighter on land. Ports and gears for the MDX series SLR housings can be used. An optional Optical YS Converter which converts the camera’s hot-shoe TTL signal into an LED light signal is compatible with the housing. Manual strobe photography is also possible. Designed for both F mount lenses with the mount adapter FTZ and Z mount lenses. The Focus/Zoom dial has two gears, one for F-mount lenses with the mount adapter FTZ and the other for Z mount lenses. The MDX-Z7 has been designed to take into consideration various Z mount lenses which will soon be available. The camera’s upper control panel can be seen. A window for the camera’s upper control panel is also incorporated. As brightness of the camera’s upper control panel has increased, the visibility is now greatly improved. MDX-Z7 - Other Features The Port Lock prevents the port from turning or loosening and the Port Lock lever is specifically located to avoid being unlocked accidentally. The housing is equipped with a lens-lock release button which makes it possible to change lenses easily, without opening the housing. Pulling out the Focus/Zoom Dial gives sufficient room inside the housing to easily accommodate larger diameter lenses. The camera’s diopter adjustment dial can be operated from outside the housing. This feature is useful when two or more people with different eyesight use the housing. All controls have luminescence stickers which glow in dark environment. Equipped with the Optical Viewfinder 0.5x as standard. Other optional viewfinders such as Optical Viewfinder 0.66x,and 0.8x can be used. ?Some vignetting occurs.When the VF45 and VF180 1.2x is mounted on housing, the  corners of the camera's viewfinder cannot be viewed due to vignetting.  Sync Cord 2-pin Connector enables use of conventional hardwired Sync cable (Manual mode only). Equipped with two sacrificial zinc diodes (one on the front case and the other on the rear) to prevent electrolysis damage. Equipped with under guard to protect from scrach. Compatible with Z7 / Z6 cameras by using the included parts 

Compatible with Sony a6000, a6300 and a6500 cameras. *When the walkie-talkie picks up the a6500, the camera's C1/C2 buttons cannot be used.. * MDX-?6300 handsets with the following serial numbers (last four digits) are compatible with all of the above cameras; Black: 0020 - 0028 and higher 0037 Orange: 0004, 0005, 0009 and 0010 Light blue: ¨above 0004 * MDX-a6300 housings¨use with serial numbers other than the above are compatible with a6000 and a6300 cameras only.. Improved underwater weight. The weight of the MDX-a6300 is approximately the same as that of the MDX-a6000. However, the underwater weight has been improved by redesigning the key components and precision machining. SA8 accessories can be attached. The MDX-a6300 is compatible with SA8 accessories, making it a compact, high-quality system. Two ergonomic thumb rests on the rear walker. When the SA8 rail and handles are not in use, the two ergonomic thumb rests can be used to securely grip the walker. ML hand strap can be attached. The ML Hand Strap is recommended when no rail or grip is used. With the ML hand strap, you can grip the walker securely with one hand. The walker features two accessory ports. One port can be used with the optional N-type lightning connector (two pins). The other port can be used with the optional leakage wächter (vacuum system). The 5-pin sync cable/N can be used when a flash (e.g., YS-D2) is connected to the housing, allowing for precise rapid flash discharge. LCD monitor hood with lens can be mounted. The hood reduces reflections and provides a clear and full view of the camera's LCD screen. Additional Features All camera functions can be used underwater. Equipped with two fiber optic cable jacks. Equipped with a lens release button. The port lock can be activated from the outside of the housing. Powerful luminescent buttons. Controls glow in low light conditions. The camera's built-in flash can be activated and deactivated from the walk üuse via the built-in flash cancel button and flash lock lever. Optional leak sensor can be built into the housing. The LED light is located in the LCD monitor window. Using the hand strap is recommended when not using a camera rail . The hand strap helps you hold the go use with only one hand. Equipped with two sacrificial zinc diodes (one on the front go use and the second on the Rück side) to prevent electrolytic shock.

Universal compatibility(*) with Sony Alpha series. The future-oriented mirrorless SLR compatible housing is now fully loaded. (*) For other Sony Alpha cameras customize kits a needed. Please contact us. Enhancement Customization Kit The shooting mode lever cannot be used. This can be handled by using an optional kit. S&Q cannot be used. Universal design for the future The back panel is designed to be large. The back acrylic panel is more than twice as large as before to improve visibility of the monitor and reduce the underwater weight. Furthermore, it is a sustainable design that can be used with new cameras in the future with minimal parts replacement.  Full range of standard equipment Grip Plus made of silicone material. Robust yet secure fit to hold the housing in place. Lighting can be deployed as desired from the SA8 fixed ball base. Pre-equipped with lanyard hooks for convenient transportation.  Newly designed fiber-optic cable cover Newly designed fiber-optic cable cover included. Prevents optical cable terminals from falling out and smartly protects light-emitting panels and cable terminals. Includes a strap to prevent loss of the cover.  Leak Alarm Unit as standard equipment The Leak Alarm Unit, which was previously available as an option, is now included as standard equipment. It is effective not only for early detection of underwater flooding accidents, but also for protection of equipment by checking its waterproof performance before entry. CR2032 lithium battery included. Strobe Synchro System The fiber-optic cable connection enables manual firing of the YS strobe. Compatible with optional Sea&Seas “Optical YS Converter S1” which converts the strobe light emission signal of the camera to LED light and synchronizes with the SEA&SEA YS strobe. It is a high-performance converter that does not just emit simple light-emitting signals, but also performs TTL auto light Control. YS strobes can be electrically connected with a sync cord with an optional electrical Connection. Please contact us for any futher questions. Focus Point Movement Settings To perform "focus point operation" during shooting, please make a custom setting for the focus point in the dial customization of the camera in advance. The focus point can be moved by operating the front/rear dial. Other Features The Port Lock prevents the port from turning or loosening and the Port Lock lever is specifically located to avoid being unlocked accidentally. The housing is equipped with a lens-lock release button which makes it possible to change lenses easily, without opening the housing. Pulling out the Focus/Zoom Dial gives sufficient room inside the housing to easily accommodate larger diameter lenses. All controls have luminescence stickers which glow in dark environment. Equipped with the Optical Viewfinder 0.5x as standard. Other optional viewfinders such as the VF180 1.2x, VF45 1.2x and Optical Viewfinder 0.66x, 0.8x can be used. ※Some vignetting occurs.When the VF180 1.2x is mounted on housing, the uper part of the camera's viewfinder cannot be viewed due to vignetting. Equipped with two sacrificial zinc diodes (one on the front case and the other on the rear) to prevent electrolysis damage. Tripod screw mount is located on the centre underside of the housing. Equipped with under guard to protect from scrach.

Universal compatibility(*) with Sony Alpha series. The future-oriented mirrorless SLR compatible housing is now fully loaded. (*) For other Sony Alpha cameras customize kits a needed. Please contact us. Universal design for the future The back panel is designed to be large. The back acrylic panel is more than twice as large as before to improve visibility of the monitor and reduce the underwater weight. Furthermore, it is a sustainable design that can be used with new cameras in the future with minimal parts replacement.  Full range of standard equipment Grip Plus made of silicone material. Robust yet secure fit to hold the housing in place. Lighting can be deployed as desired from the SA8 fixed ball base. Pre-equipped with lanyard hooks for convenient transportation.  Newly designed fiber-optic cable cover Newly designed fiber-optic cable cover included. Prevents optical cable terminals from falling out and smartly protects light-emitting panels and cable terminals. Includes a strap to prevent loss of the cover.  Leak Alarm Unit as standard equipment The Leak Alarm Unit, which was previously available as an option, is now included as standard equipment. It is effective not only for early detection of underwater flooding accidents, but also for protection of equipment by checking its waterproof performance before entry. CR2032 lithium battery included. Strobe Synchro System The fiber-optic cable connection enables manual firing of the YS strobe. Compatible with optional Sea&Seas “Optical YS Converter S1” which converts the strobe light emission signal of the camera to LED light and synchronizes with the SEA&SEA YS strobe. It is a high-performance converter that does not just emit simple light-emitting signals, but also performs TTL auto light Control. YS strobes can be electrically connected with a sync cord with an optional electrical Connection. Please contact us for any futher questions. Focus Point Movement Settings To perform "focus point operation" during shooting, please make a custom setting for the focus point in the dial customization of the camera in advance. The focus point can be moved by operating the front/rear dial. Other Features The Port Lock prevents the port from turning or loosening and the Port Lock lever is specifically located to avoid being unlocked accidentally. The housing is equipped with a lens-lock release button which makes it possible to change lenses easily, without opening the housing. Pulling out the Focus/Zoom Dial gives sufficient room inside the housing to easily accommodate larger diameter lenses. All controls have luminescence stickers which glow in dark environment. Equipped with the Optical Viewfinder 0.5x as standard. Other optional viewfinders such as the VF180 1.2x, VF45 1.2x and Optical Viewfinder 0.66x, 0.8x can be used. ※Some vignetting occurs.When the VF180 1.2x is mounted on housing, the uper part of the camera's viewfinder cannot be viewed due to vignetting. Equipped with two sacrificial zinc diodes (one on the front case and the other on the rear) to prevent electrolysis damage. Tripod screw mount is located on the centre underside of the housing. Equipped with under guard to protect from scrach.

Universal compatibility(*) with Sony Alpha series. The future-oriented mirrorless SLR compatible housing is now fully loaded. (*) For other Sony Alpha cameras customize kits a needed. Please contact us. Enhancement Customization Kit The shooting mode lever cannot be used. This can be handled by using an optional kit. S&Q cannot be used. Universal design for the future The back panel is designed to be large. The back acrylic panel is more than twice as large as before to improve visibility of the monitor and reduce the underwater weight. Furthermore, it is a sustainable design that can be used with new cameras in the future with minimal parts replacement.  Full range of standard equipment Grip Plus made of silicone material. Robust yet secure fit to hold the housing in place. Lighting can be deployed as desired from the SA8 fixed ball base. Pre-equipped with lanyard hooks for convenient transportation.  Newly designed fiber-optic cable cover Newly designed fiber-optic cable cover included. Prevents optical cable terminals from falling out and smartly protects light-emitting panels and cable terminals. Includes a strap to prevent loss of the cover.  Leak Alarm Unit as standard equipment The Leak Alarm Unit, which was previously available as an option, is now included as standard equipment. It is effective not only for early detection of underwater flooding accidents, but also for protection of equipment by checking its waterproof performance before entry. CR2032 lithium battery included. Strobe Synchro System The fiber-optic cable connection enables manual firing of the YS strobe. Compatible with optional Sea&Seas “Optical YS Converter S1” which converts the strobe light emission signal of the camera to LED light and synchronizes with the SEA&SEA YS strobe. It is a high-performance converter that does not just emit simple light-emitting signals, but also performs TTL auto light Control. YS strobes can be electrically connected with a sync cord with an optional electrical Connection. Please contact us for any futher questions. Focus Point Movement Settings To perform "focus point operation" during shooting, please make a custom setting for the focus point in the dial customization of the camera in advance. The focus point can be moved by operating the front/rear dial. Other Features The Port Lock prevents the port from turning or loosening and the Port Lock lever is specifically located to avoid being unlocked accidentally. The housing is equipped with a lens-lock release button which makes it possible to change lenses easily, without opening the housing. Pulling out the Focus/Zoom Dial gives sufficient room inside the housing to easily accommodate larger diameter lenses. All controls have luminescence stickers which glow in dark environment. Equipped with the Optical Viewfinder 0.5x as standard. Other optional viewfinders such as the VF180 1.2x, VF45 1.2x and Optical Viewfinder 0.66x, 0.8x can be used. ※Some vignetting occurs.When the VF180 1.2x is mounted on housing, the uper part of the camera's viewfinder cannot be viewed due to vignetting. Equipped with two sacrificial zinc diodes (one on the front case and the other on the rear) to prevent electrolysis damage. Tripod screw mount is located on the centre underside of the housing. Equipped with under guard to protect from scrach.

Universal compatibility(*) with Sony Alpha series. The future-oriented mirrorless SLR compatible housing is now fully loaded. (*) For other Sony Alpha cameras customize kits a needed. Please contact us. Enhancement Customization Kit Drive mode/focus mode dials are not available as standard. It can be supported by using the kit. If you want to change the drive mode etc. without modification, you can temporarily use it by registering the camera's custom shooting setting in advance and calling up the function, but it is not a perfect Substitute. Universal design for the future The back panel is designed to be large. The back acrylic panel is more than twice as large as before to improve visibility of the monitor and reduce the underwater weight. Furthermore, it is a sustainable design that can be used with new cameras in the future with minimal parts replacement.  Full range of standard equipment Grip Plus made of silicone material. Robust yet secure fit to hold the housing in place. Lighting can be deployed as desired from the SA8 fixed ball base. Pre-equipped with lanyard hooks for convenient transportation.  Newly designed fiber-optic cable cover Newly designed fiber-optic cable cover included. Prevents optical cable terminals from falling out and smartly protects light-emitting panels and cable terminals. Includes a strap to prevent loss of the cover.  Leak Alarm Unit as standard equipment The Leak Alarm Unit, which was previously available as an option, is now included as standard equipment. It is effective not only for early detection of underwater flooding accidents, but also for protection of equipment by checking its waterproof performance before entry. CR2032 lithium battery included. Strobe Synchro System The fiber-optic cable connection enables manual firing of the YS strobe. Compatible with optional Sea&Seas “Optical YS Converter S1” which converts the strobe light emission signal of the camera to LED light and synchronizes with the SEA&SEA YS strobe. It is a high-performance converter that does not just emit simple light-emitting signals, but also performs TTL auto light Control. YS strobes can be electrically connected with a sync cord with an optional electrical Connection. Please contact us for any futher questions. Focus Point Movement Settings To perform "focus point operation" during shooting, please make a custom setting for the focus point in the dial customization of the camera in advance. The focus point can be moved by operating the front/rear dial. Other Features The Port Lock prevents the port from turning or loosening and the Port Lock lever is specifically located to avoid being unlocked accidentally. The housing is equipped with a lens-lock release button which makes it possible to change lenses easily, without opening the housing. Pulling out the Focus/Zoom Dial gives sufficient room inside the housing to easily accommodate larger diameter lenses. All controls have luminescence stickers which glow in dark environment. Equipped with the Optical Viewfinder 0.5x as standard. Other optional viewfinders such as the VF180 1.2x, VF45 1.2x and Optical Viewfinder 0.66x, 0.8x can be used. ※Some vignetting occurs.When the VF180 1.2x is mounted on housing, the uper part of the camera's viewfinder cannot be viewed due to vignetting. Equipped with two sacrificial zinc diodes (one on the front case and the other on the rear) to prevent electrolysis damage. Tripod screw mount is located on the centre underside of the housing. Equipped with under guard to protect from scrach.

Universal compatibility(*) with Sony Alpha series. The future-oriented mirrorless SLR compatible housing is now fully loaded. (*) For other Sony Alpha cameras customize kits a needed. Please contact us. Enhancement Customization Kit Drive mode/focus mode dials are not available as standard. It can be supported by using the kit. If you want to change the drive mode etc. without modification, you can temporarily use it by registering the camera's custom shooting setting in advance and calling up the function, but it is not a perfect Substitute. Universal design for the future The back panel is designed to be large. The back acrylic panel is more than twice as large as before to improve visibility of the monitor and reduce the underwater weight. Furthermore, it is a sustainable design that can be used with new cameras in the future with minimal parts replacement.  Full range of standard equipment Grip Plus made of silicone material. Robust yet secure fit to hold the housing in place. Lighting can be deployed as desired from the SA8 fixed ball base. Pre-equipped with lanyard hooks for convenient transportation.  Newly designed fiber-optic cable cover Newly designed fiber-optic cable cover included. Prevents optical cable terminals from falling out and smartly protects light-emitting panels and cable terminals. Includes a strap to prevent loss of the cover.  Leak Alarm Unit as standard equipment The Leak Alarm Unit, which was previously available as an option, is now included as standard equipment. It is effective not only for early detection of underwater flooding accidents, but also for protection of equipment by checking its waterproof performance before entry. CR2032 lithium battery included. Strobe Synchro System The fiber-optic cable connection enables manual firing of the YS strobe. Compatible with optional Sea&Seas “Optical YS Converter S1” which converts the strobe light emission signal of the camera to LED light and synchronizes with the SEA&SEA YS strobe. It is a high-performance converter that does not just emit simple light-emitting signals, but also performs TTL auto light Control. YS strobes can be electrically connected with a sync cord with an optional electrical Connection. Please contact us for any futher questions. Focus Point Movement Settings To perform "focus point operation" during shooting, please make a custom setting for the focus point in the dial customization of the camera in advance. The focus point can be moved by operating the front/rear dial. Other Features The Port Lock prevents the port from turning or loosening and the Port Lock lever is specifically located to avoid being unlocked accidentally. The housing is equipped with a lens-lock release button which makes it possible to change lenses easily, without opening the housing. Pulling out the Focus/Zoom Dial gives sufficient room inside the housing to easily accommodate larger diameter lenses. All controls have luminescence stickers which glow in dark environment. Equipped with the Optical Viewfinder 0.5x as standard. Other optional viewfinders such as the VF180 1.2x, VF45 1.2x and Optical Viewfinder 0.66x, 0.8x can be used. ※Some vignetting occurs.When the VF180 1.2x is mounted on housing, the uper part of the camera's viewfinder cannot be viewed due to vignetting. Equipped with two sacrificial zinc diodes (one on the front case and the other on the rear) to prevent electrolysis damage. Tripod screw mount is located on the centre underside of the housing. Equipped with under guard to protect from scrach.

Universal compatibility(*) with Sony Alpha series. The future-oriented mirrorless SLR compatible housing is now fully loaded. (*) For other Sony Alpha cameras customize kits a needed. Please contact us. Enhancement Customization Kit The shooting mode lever cannot be used. This can be handled by using an optional kit. S&Q cannot be used. Universal design for the future The back panel is designed to be large. The back acrylic panel is more than twice as large as before to improve visibility of the monitor and reduce the underwater weight. Furthermore, it is a sustainable design that can be used with new cameras in the future with minimal parts replacement.  Full range of standard equipment Grip Plus made of silicone material. Robust yet secure fit to hold the housing in place. Lighting can be deployed as desired from the SA8 fixed ball base. Pre-equipped with lanyard hooks for convenient transportation.  Newly designed fiber-optic cable cover Newly designed fiber-optic cable cover included. Prevents optical cable terminals from falling out and smartly protects light-emitting panels and cable terminals. Includes a strap to prevent loss of the cover.  Leak Alarm Unit as standard equipment The Leak Alarm Unit, which was previously available as an option, is now included as standard equipment. It is effective not only for early detection of underwater flooding accidents, but also for protection of equipment by checking its waterproof performance before entry. CR2032 lithium battery included. Strobe Synchro System The fiber-optic cable connection enables manual firing of the YS strobe. Compatible with optional Sea&Seas “Optical YS Converter S1” which converts the strobe light emission signal of the camera to LED light and synchronizes with the SEA&SEA YS strobe. It is a high-performance converter that does not just emit simple light-emitting signals, but also performs TTL auto light Control. YS strobes can be electrically connected with a sync cord with an optional electrical Connection. Please contact us for any futher questions. Focus Point Movement Settings To perform "focus point operation" during shooting, please make a custom setting for the focus point in the dial customization of the camera in advance. The focus point can be moved by operating the front/rear dial. Other Features The Port Lock prevents the port from turning or loosening and the Port Lock lever is specifically located to avoid being unlocked accidentally. The housing is equipped with a lens-lock release button which makes it possible to change lenses easily, without opening the housing. Pulling out the Focus/Zoom Dial gives sufficient room inside the housing to easily accommodate larger diameter lenses. All controls have luminescence stickers which glow in dark environment. Equipped with the Optical Viewfinder 0.5x as standard. Other optional viewfinders such as the VF180 1.2x, VF45 1.2x and Optical Viewfinder 0.66x, 0.8x can be used. ※Some vignetting occurs.When the VF180 1.2x is mounted on housing, the uper part of the camera's viewfinder cannot be viewed due to vignetting. Equipped with two sacrificial zinc diodes (one on the front case and the other on the rear) to prevent electrolysis damage. Tripod screw mount is located on the centre underside of the housing. Equipped with under guard to protect from scrach.

The latest MDX-RX100 lll housing is compatible with the Sony RX100 lll, lV and V cameras. * The MDX-RX100 lll housing with serial numbers above ...0201 is compatible with all of the above cameras. * If you would like to have the housing modified to accommodate the SONY RX100 V camera, please contact us before ordering. Adapter lenses or filters with threaded connection M67 can be mounted on the port The port is threaded so that the M67 wide-angle converter lens 0.6x can be mounted directly. * If the lens is used with the widest angle, vignetting will occur in the corners of the image. Zoom in slightly (approx. 30 mm angle of view) to avoid vignetting. Two SA8 ball head adapter mounts built in By attaching the SA8 ball head adapter to the specially designed brackets located on the top and side of the housing, SA8 components can be mounted on the housing without a handle or rail. Mounting the SA8 ball head for hot shoe adapter offers even more versatile lighting options. Additional flashes or lamps can be used. LCD monitor bonnet with lens can be mounted The LCD bonnet reduces reflections and provides a clear and complete view of the camera's LCD screen. (LCD bonnet stopper included)  All camera functions can be operated underwater. The large control dial on the front of the housing connects to the camera's control ring and enables smooth operation of manual focus and other functions. The multi-purpose control dial on the back of the camera is operated via the multi-point control on the back of the housing. All controls are easily accessible and can be operated with the right hand.The flash built into the camera can be activated and deactivated from the walker.Equipped with two fibre optic cable sockets. Optional leak sensor can be installed in the housing. The LED light is located in the LCD monitor window and warns you of water ingress. The sensor warns you immediately of water ingress when the super bright LED lights up. Equipped with two sacrificial zinc diodes (one in the front of the housing and one on the back) to prevent electrolyte damage. The camera can be mounted in the housing with the Sony AG-R2 accessory handle, so that it can be used comfortably and stably on land if required. Non-slip rubber on the upper right rear handle, which keeps the handle stable. The housing is easy to open and lock with the twist lock and hinge. External flash or light can be mounted by attaching an SA8 rail & handle 2118 to the tripod thread on the underside of the housing. A rated depth of 100m makes the housing ideal for tech diving.