Canon EOS R Underwater housing by Sea&Sea

This item is discontinued. Please find accessories and technical data here.

Product number: SEA06190
HAN: MDX-R

Most modern Sea&sea underwater housing MDX-R for mirrorless full-frame camera Canon EOS R. Compact, compatible with YS optical converter and ergonomically designed.

  • The Port Lock prevents the port from rotating or loosening, and the Port Lock lever is specially positioned to prevent accidental unlocking.
  • The housing is equipped with a lens release button that allows for easy lens changes without having to öopen the housing.
  • Pulling out the focus/zoom wheel provides enough space inside the housing to easily accommodate larger diameter lenses.
  • All controls have luminescent decals that glow in dark environments.
  • Fitted with the 0.5x optical viewfinder as standard. Other optional viewfinders such as the 0.66x and 0.8x optical viewfinders can be used.
  • When the VF45 and VF180 1.2x are mounted on the housing, the corners of the camera's viewfinder cannot be viewed due to vignetting.
  • The 2-pin sync cable connector allows the use of a conventional hard-wired sync cable (only in manual mode).
  • Equipped with two sacrificial zinc diodes (one on the front and the other on the Rück side) to prevent electrolytic damage.
  • Equipped with an underbody protector to protect against scratches.

Designed to be compact and lightweight.

The housingsäuse been developed according to the advantages of the compact design and light weight of the mirrorless camera to improve these characteristics. Compared to the SLR MDX-5D Mark lV camera body, the MDX-R is 100g/ lighter on land. 

seaandsea-mdx-r-open

Connectors and gears for the MDX series SLR housings can be used.

The MDX-R is compatible with the MDX series SLR housing port system. With the mounting adapter and ports/gears for the MDX series housings, you can use EF lenses.

Compatible with YS optical converter C/R. TTL flash mode possible.

The new optional YS optical converter C/R*, which converts the camera's TTL signal into an LED light signal, is available. With the converter, both TTL and manual exposure adjustment is possible.

seaandsea-mdx-r-converter

Developed for RF mount lenses

.

The focus/zoom wheel has two gears, one of which is designed for RF-mount lenses.

seaandsea-mdx-r-zoomrad

Body Material: aluminum
Camera System: Mirrorless (MIL)
Camera manufacturer: CANON
Strobe connector: optical Sea&Sea
Tripod connection: Thread 3/8
Weiterlesen
Technical data
  • Material: korrosionsbeständige Aluminiumlegierung (bearbeitet) 
  • Griff: korrosionsbeständige Aluminiumdruckgusslegierung
  • Nenntiefe 100m
  • Abmessungen (BxHxT) 342 x 174 x 159 mm
  • Gewicht ca. 2.900g (nur Gehäuse)
Scope of delivery

1 Sea&Sea MDX-R Unterwassergehäuse für Canon EOS R

Keine Ports im Lieferumfang enthalten!

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.

Similar products

Canon EOS R Underwater Housing by Nauticam
With the Canon EOS R, underwater photographers not only get a full-frame mirrorless camera with Canon's Dual Pixel autofocus and the ability to use the EF-S range with an adapter, but also the new RF mount, which enables new lenses with groundbreaking features. The EOS R features a 30.3 MP full-frame CMOS sensor with the new RF lens mount and a 3.7-million-dot electronic viewfinder. The Canon EOS R Camera The Canon EOS R is remarkable not only because it is Canon's first full-frame mirrorless camera, but also because of the many additional features available with the introduction of the RF lens mount. The RF lens mount has the same large diameter of 54mm, but the ability to use larger rear lens elements that are closer to the sensor increases the sharpness in the corners and at the outer edge. The lenses can also be more compact than lenses with the same coverage area in the EF mount. The addition of 4 more lens communication pins to a total of 12 pins expands the functionality of the lenses. RF lenses feature a customizable control ring that will also be available on one of the two EF mount lens adapters and can be assigned to control various exposure settings. On the RF lenses, manual focus is now controlled electronically, which allows the direction of rotation of the lens' manual focus ring to be changed. The EOS R is also able to use the wide range of EF-mount lenses üvia three optional adapters: a simple EF-to-R adapter, an adapter that supports the customizable control ring, and another that offers a drop-in filter port. The features that have made Canon DSLR and Cinema cameras favorites of underwater photographers are also present in the EOS-R, including powerful and precise Dual Pixel autofocus and 4K Canon Log video recording üvia the large 30.2MP CMOS full-frame sensor. Important Camera Specifications 30.3MP CMOS full-frame sensor 8fps continuous shooting 4K UHD recording at up to 30 frames per second All-I ISO 100-40,000   The NA-R underwater gear from Nauticam. The NA-R underwater gear embodies Nauticam's drive for innovation. Both the Canon EOS R and Nikon Z-7/6 cameras offer photographers the ability to use available äolder lenses üvia an adapter in addition to the original optics.  For many, the EOS R is a transition from a Canon full-frame DSLR. To support both conventional and original lenses, Nauticam has integrated the NA-R into the N120 port system.. Use lenses with RF or EF mounts - with the same port system. Canon's EF-to-RF adapters can be attached to the camera before insertion into the housing.  When using the EOS R inside the housing with the adapter and a supported EF lens, the port and port extension are identical to the same arrangement on a Nauticam Canon N120 DSLR. As the range of RF lenses evolves, dedicated port and port extension combinations will be listed in the port overview.   Two lens release buttons, one for RF lenses and one for EF lenses used with the optional Canon adapter, are located on the front of the housing to facilitate lens removal through the portöopening.   Controls. Nauticam engineers are obsessed with giving the photographer unobstructed access to all necessary controls underwater, with as many as possible within easy reach of the ergonomically rubberized grips.  This mission control philosophy extends to the NA-R, which features a dual thumb lever and dual sub-lever on the right grip.   The thumb lever activates the "AF-On" buttons and the lower one activates the "Info" buttons, while the lower lever corresponds to the "M-Fn" and "Record" buttons.  Next to the left grip is a thumb lever for "Playback" as well as a dedicated switch for switching from LCD to EVF.   Large, knurled and rubberized knobs access the camera's "main"and "sub"command controls.  The two-stage off"ser enables smooth focus and off"activation. Additional buttons for "Menü", "focus point selection" and others are also "easily accessible via the handles.. An additional control wheel is located on the left side of the housing and connects to the control ring on the supported EF to EOS R mount adapter with control ring üvia the optional gear (NA19561). Flash triggering Flash output is via one of two optional flash outputs, a manual LED output (NA26301) or a TTL flash output (NA26321), which use the built-in fiber optic ports with optional fiber optic cables to output supported flash units. For control of flashes that do not support fiber-optic flash output, a variety of older flash sockets are available. Video üvia HDMI  The EOS R is capable of outputting a 10-bit 4K UHD (3840 x 2160) 30p video signal üvia HDMI.  When combined with the optional standard M16 HDMI jack (NA25033) and HDMI (D-C) 190mm cable (NA25036), the NA-R can be used in conjunction with an external monitor or recorder such as the SmallHD 502B or Ninja Inferno in their respective Nauticam housings. Vacuum test and leak detection system  The NA-R is supplied with the electronics as well as the M16 II vacuum valve for vacuum testing and the leak detection system. This simple system makes it possible to check the waterproof integrity of the housing before the dive and to monitor it continuously throughout the dive. The Nauticam system is temperature compensated, eliminating false alarms caused by a  change in external temperature or by heating a camera during an action-packed dive.

Optical YS Converter/CR for MDX housing
Converts the Canon EOS R's TTL signal to a light signal. Therefore, strobes can be fired as quickly as the strobes' recycle time. Compatilbe strobes: YS-D3 MKII, YS-D3, YS-D2 and YS-D1. Mechanical specifications are the same as other Optical YS Converters. Specifications Sea&Sea Optical Converter Firmware Update for YS-D3 Sea&Sea has now released firmware for updating existing S&S Optical Converts already in the field to enable YS-D3 compatibility. In order to update existing S&S Optical Converters, please contact your local Sea&Sea Dealer or Sea&Sea Distributor. Please note that the YS-110α position is utilized on existing Optical Converters for YS-D3 functioning. The following Optical Converters, shipping from October 2020, are updated for D3 compatibility. Updated Optical Converters are distinguished by a “D3” position. Note: After completing the update on existing units in the field and all Optical converters shipping after October 2020 will not be compatible with the YS-110αstrobes.

€499.00*
45° external viewfinder with 1.2x magnification (VF45) by Sea&Sea
A 45° prism viewfinder (magnification: 1.2x) The optional VF45 prism viewfinder replaces the original viewfinder in your housing and provides excellent viewing. Covering the entire field of view, the VF45 increases magnification by 1.2x and enables accurate framing and focusing of subjects. The eyepiece can be rotated 360° in 90° increments to achieve the ideal camera position in portrait or landscape mode. The 45-degree prism viewfinder is ideal for all conditions, but is particularly suited to macro photography when the camera is often positioned lower than the photographer. The ergonomically designed eyepiece prevents unnecessary light from entering and allows clear and precise images through the viewfinder.

€949.00*
TTL-Converter for Canon in Sea&Sea housings
Optoelectronic TTL converter for the modern generation of Sea&Sea cameras for Canon, including the latest R5, R7, R6II etc. All Canon cameras are compatible, regardless of model and TTL protocol version. Supported flash units: Inon S-220Z240, Z330, D2000; Ikelite DS161, DS160; Sea&Sea YS-250, YS-D1, YS-D3 Mark II; Subtronic Pro270, Pro160, RetraFlash. TTL board supports 2pcs optical bulks + 2pcs electric bulks can be connected. The standard kit contains optical LED emitters (2 pcs.). The electrical cable/connector (1 or 2 pcs.) for connection to the Nikonos-V bulkhead is an optional product that can be purchased separately (please specify when ordering).  TTL and HSS on the RetraFlash Fantastic TTL accuracy allows the photographer to relax and rely entirely on automatic flash exposure control. Many creative tasks are made possible by using extremely fast HSS shutter speeds of up to 1/8000 with the Retra Pro flash in manual mode. The TTL converter firmware also has several other important updates related to its common functionality. The Retra PRO profile can be set by the user üvia the TTL converter's built-in rotary switch. The TTL/M modes can be switched underwater simply by using the camera name or the flash button. In manual mode, the flash intensity can be adjusted manually üvia the camera wheel/scale, but also üvia the flash control knob. (+/-) TTL flash compensation is supported by the firmware, the full range is available via the camera control in the range -3ev......+3ev. The firmware supports sync settings for the 1-st /2-nd curtain and the rear curtain. Continuous (serial) recording is supported. The HSS firmware of the TTL converter supports the HSS functionality of the Retra Pro flash. The built-in rotary switch must be set to the Retra Pro profile (position - "7"). Available HSS shutter speeds for Sony A7-A9: 1/320 ....1/8000 sec. The Retra flash allows the HSS flash intensity to be adjusted with the rotary knob. In the updated firmware, switching to HSS shutter speeds is also included in the general functionality of the TTL converter (also for all other positions of the rotary switch), - usable for shooting with ambient light at high shutter speeds if required. However, the X-Sync speed limit (1/250 for Sony A7-A9) is still automatically supported for TTL modes, as required for mono flash TTL underwater flash. Incredibly long battery life in the TTL converter: 1-3 years of continuous operation. The product has extremely low power consumption. The converter features an automatic on/off switching module that saves battery power. No mechanical switch is required to switch UW Technics TTL converters on and off. The TTL converter firmware includes TTL profiles for the following underwater flashes: Retra Pro, Inon Z-330/ Z-240/S-2000, Sea&Sea YS-D2/ YS-D1/ YS-250, Ikelite DS-161/ DS-160 and Subtronic Pro-270/Pro-160. Each profile can be easily set by the user via an onboard switch.

€590.00*