&Um;revised ergonomic design, improved safety features and eye-catching Äeres. The new MDX-L series housings are now equipped with more standard features to ensure better handling and protection of your camera
.Best Features
The Sea&Sea underwater housing is equipped with the Handgrip plus, SA8 ball head adapter and Leak Sensor moisture warning system
.- Equipped with new silicone handle inserts for firm and solid grip as standard. Silicone composite material implanted in the handle to provide a firm grip.
- SA8 Fixed Ball Bases now come standard with MDX-L series housings. .
- Installed leak sensor is a standard accessory.
For better visibility, some of the controls are set off in yellow.
Compatible with YS optical covertor S1
.Compatible with SEA&SEA "Optical YS Converter S1" which converts the camera's electrical flash signal into LED light and synchronizes it with the SEA&SEA YS underwater flash. It is a powerful converter that not only outputs simple light-emitting signals, but also adopts TTL automatic üb.
* The Sony original adapter "ADP-MAA" is needed separately for connecting camera and YS optical converter.
.Combined buoyancy/battery compartment
.With the "Buoyancy Pocket" (*1), the downforce is reduced by about 240 g (*2). However, the compartment can also be used as a place für an additional battery pack (*3).
- *1) Dimensions: 100x63x24 mm .
- *2) Compared to MDX-5D Mark lV, 240 g lighter under the following conditions: MDX-?7lV + SEL90M28 + Focus Gear + DX Macro Port 87 (underwater weight: 700 g).
- *3) Sea&Sea üassumes no responsibility for accidents caused by the use of an additional battery or other accessory in the buoyancy compartment.
Compatible with all DX (NX) series ports
.The camera can be easily removed from the housing even when a large diameter lens such as the SEL1635GM is mounted on the camera without removing the port from the housing, allowing you to replace the battery and lens with ease.
Special Features:
- The "port lock" prevents the port from rotating or loosening, and the port lock lever is specially positioned to prevent accidental unlocking.
- The housing is equipped with a lens release button that allows for easy lens changes without opening the housing.
- Pulling out the focus/zoom wheel provides enough space inside the housing to easily accommodate larger diameter lenses.
- The camera's diopter adjustment knob can be operated from outside the housing. This feature is useful when two or more people with different eyesight are using the walker.
- All controls have luminescent decals that glow in a dark environment.
- Fitted with the 0.5x optical viewfinder as standard. Other optional viewfinders such as the VF180 1.2x, VF45 1.2x and the 0.66x, 0.8x optical viewfinders can be used.
- When the VF180 1.2x is mounted on the housing, the upper part of the viewfinder of the camera cannot be viewed due to vignetting.
- The 2-pin sync cable connector allows the use of a conventional hardwired sync cable (only in manual mode).
- Equipped with two sacrificial zinc diodes (one on the front and the other on the Rück side) to prevent electrolytic damage.
- The built-in leak sensor immediately warns you of water ingress.
- The tripod screw mount is located on the middle bottom of the case.
- Equipped with an underbody protector to protect against scratches.
Arm Attachment: | 1-inch ballhead |
---|---|
Body Material: | aluminum |
Camera System: | Mirrorless (MIL) |
Camera manufacturer: | Sony |
Strobe connector: | optical Sea&Sea |
Tripod connection: | Thread ¼ |
portsystem: | DX |
- Material: corrosion-resistant aluminium alloy (housing)
- corrosion-resistant die-cast aluminium alloy (handles)
- Nominal depth:100 m
- Dimensions: (WxHxD) 330 x 189 x 131 mm
- Weight approx. 2,800 g (housing only)
Sony a7R Mark IV Underwater Housing by Sea&Sea
Login