Looking at the specs, the Sony FX3 is strikingly similar to the A7S III less an electronic viewfinder.  Take a closer look and its the powerful video features of the A7S III with cinema-centric controls and exterior design.  The FX3 can capture 4K at up to 120fps with 15+ stops of dynamic range with the option for RAW over HDMI.  Controls are optimized for video with direct iris, ISO and shutter angle control.  With the addition of an internal fan, the recording time limit for 4K60p has been removed.  The NA-FX3's compact size make it ideal for the traveling filmmaker and those looking for a more nimble underwater System. THE SONY ALPHA FX3 CINEMA LINE FULL-FRAME CAMERA Compact cinema cameras are increasingly a popular choice for underwater film making and Sony's FX3 brings the powerful capabilities of the A7S III full-frame mirrorless camera to the form factor.  The FX3 is built around the same sensor as the A7S III that allows for capture of up to 4K 120p 10-bit 4:2:2 with full-pixel readout.  The FX3 adds a cooling fan to reduce heat buildup during continuous filming and omits the electronic viewfinder of the A7S III.  The controls of the FX3 are also clearly cinema-centric with direct access to iris, shutter angle, ISO and WB.  There is also a zoom lever and tally light. The FX3's 627-point phase detection autofocus features customizable AF Transition Speed as well as Subject Shit Sensitivity as well as real-time AF tracking.  5-axis in-body stabilization helps create smooth video.  The FX3 has minimized rolling shutter effect at higher frame rates due to faster sensor readout. The incredible sensitivity of the A7S III is shared by the FX3 with a maximum ISO value of 409,600 and reduced noise at higher sensitivities.  When shooting at higher frame rates, the ability to shoot at higher ISO values with little penalty to image quality is a game changer.  Using color correction filters, which often result in a loss of light, while maintaining desired iris and shutter angle settings makes the FX3 ideal as an underwater filmmaking camera for even the most challenging lighting situations.  A visible and IR light sensor improves white balance accuracy. When working with external recorders, the FX3 can output a RAW 16-bit 4K60p signal via the HDMI type-A port.  Internal recording is to dual CFexpress Type A or SDXC/SDHC card slots.   THE NAUTICAM NA-FX3 UNDERWATER HOUSING The Nauticam NA-FX3 underwater housing is designed to deliver an intuitive user experience in a rugged and reliable platform that is supported by the extensive Nauticam lineup of accessories and premium optics. The NA-FX3 is built around the N100 port system that is shared by all full-frame Sony mirrorless systems in the Nauticam lineup, allowing seamless crossover for existing Sony shooters.   CAMERA COMPATIBILITY The NA-FX3 underwater housing is compatible with both the Sony FX3 and the Sony FX30.    MISSION CONTROL The NA-FX3 is designed with our Mission Control philosophy, placing controls where they can be easily accessed with minimal movement.  Within easy reach of the right handle are control dials for Iris, ISO and Shutter Speed.  There is also a dedicated REC button and FOCUS MAG lever.  Stainless steel stabilizing brackets insure the handles remain steady even when using large video lights or other accessories. CONNECTIVITY The NA-FX3 features a an M24 bulkhead which supports the Nauticam HDMI 2.0/1.4 cable system which can be paired with supported external monitors/recorders.  In addition there is an M16 bulkhead which is dedicated for remote control capability using the Sony RM-VPR1 controller (proprietary waterproof cable is required).  On the rear cover there is also an M14 bulkhead which can be fitted with the optional M14 Vacuum Valve II (25624).  The NA-FX3 comes with the Nauticam vacuum check and leak detection system as standard equipment. This monitoring system, when paired with the optional vacuum valve, provides constant updates on the water tight and safe-to-dive status of the housing. A simple color coded LED lighting system lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur. The Nauticam system is temperature compensated, eliminating false alarms caused by a change in outside temperature, or from a camera heating up on an action packed dive. PREMIUM PROFESSIONAL OPTICS Optical performance is just as necessary as camera performance and this becomes even more critical given the challenges of filming underwater. The Nauticam NA-FX3 uses the same N100 Port System as other Sony full-frame mirrorless housings which makes for a seamless transition for those upgrading or looking to add an additional camera to their lineup. While this system provides exceptional optical-glass and flat port solutions for a wide variety lenses, the real power can be realized using Nauticam's Water Contact Optics. This lineup of dry and wet lenses are conceived using commercial lens-design software to achieve truly unparalleled underwater image quality both for stills and video in both macro and wide-angle situations. The WACP-1 and WACP-2 achieve ultra-wide 130º fields-of-view with reduced distortion over conventional optics while featuring ~0" minimum focus distances, zoom through capabilities and unbeatable corner sharpness at even wide-open apertures such as F5.6.  

The ARRI ALEXA 35 sets a new standard for Super 35 digital video cameras, featuring an all-new 4.6K ALEV 4 CMOS sensor, a massive 17 stops of dynamic range and a host of new features that make it the new gold standard for digital cinematography.   The ARRI ALEXA 35 camera   The ALEXA 35 builds on ARRI's already impressive range of cinema cameras and is perfect for underwater production, providing a compact and feature-rich addition to the ARRI camera range. The ALEXA 35 has a robust, compact form factor, similar to the ALEXA Mini, but with features similar to the larger ALEXA camera. The ALEXA 35 can record both ARRIRAW and Apple ProRES at resolutions up to 4.6K and frame rates up to 120p onto 2TB Codex drives. To take full advantage of the all-new sensor, ARRI has also developed the all-new REVEAL Color Science.  Developed based on feedback from colourists and cinematographers, REVEAL Color Science provides improvements in colour, contrast, sensitivity and dynamic range.   In addition to ARRI's newer LPL (LBUS) mount, which covers ARRI's entire sensor size range with optimised full sensor coverage, the ALEXA 35 can also be used with the PL to LPL Adapter, EF Mount and PL Mount.     The Nauticam underwater housing for the ARRI ALEXA 35 Easy camera installation The Nauticam system is designed for both owners/operators and landlords and is very easy to set up. With just a pin and an Allen key, the entire mounting and lens control system is set up on the camera base plate outside the housing. This means that the rig can be set up on a table, in good light and with plenty of room to work. Once the camera is mounted on the base plate, the entire system slides into the housing and locks securely into place. Lens operation Similar to the ALEXA Mini and Mini LF hoods, the ALEXA 35 hood features an adjustable gear tower that allows you to control focus, iris and zoom via the knobs on the outside of the hood. This diver-controlled device fully meets the needs of a single operator. For more production-oriented shoots that require remote control, the redesigned Nauticam ALEXA 35 housing features two upper and two lower 15mm rods that allow the use of cforce Plus and cforce mini motors in conjunction with the ARRI Hi-5 handheld unit. Only the upper 15 mm rod is suitable for the larger cforce Plus motors.   Unlike the previous generation housings, the motors now drive the lens itself and no longer   via the adjustable gear tower.  With the standard housing, two motors can be mounted for short primes.  If you add the optional 100mm housing extension NA16422, you can mount 3 motors on the 15mm rods, which allows the use of zoom lenses or longer lenses. The housing also comes with a 3/4′hydroflex bulkhead so that the power, remote control and remote monitoring lines of other Hydroflex rental systems can be used on the Alexa Mini. A huge range of lenses are supported, from very small standard Zeiss lenses to very large cinema-style zoom lenses. Our port system was tested with the Arri UWZ 9.5-18, the most sophisticated wide-angle lens ever made, and achieved excellent results. Recommended Accessories for Surface Lens Control NA16249 LBUS surface cable for Hi-5 hand unit for use with Nauticam Alexa 35 housing (30m) NA16247 Replacement of internal LBUS cable (from camera to housing bulkhead) NA16248 Conversion cable für 16223 LCS cable for use with the Hi-5 Hand Unit . Battery Configuration The Nauticam underwater housing comes with a V-mount battery plate and a LEMO connector for the ALEXA 35 camera.  There is enough room in the housing for various battery sizes, allowing for long operating times. Surface power is also an option for all-cable shooting. Trim weights . The optional trim weights can be moved independently along the skids of the walker, and there are additional attachment points on the walker itself to tailor the walker to the exact needs of the skier. Supports the entire skid. Support for external monitors . The SmallHD 503 Ultrabright or Atomos Ninja V monitor can be mounted in the Nauticam NA-503-S or Nauticam Atomos Ninja V-S enclosure and connected via SDI bulkheads and cables, allowing greater flexibility in positioning the monitor on the Nauticam Alexa 35 enclosure. SDI output Required accessories for SDI cable system NA25058 M16 SDI bulkhead NA25060 SDI cable in 0.3m length Recommended monitor housing NA17925S Nauticam NA-503-S Housing for Small HD 503 Ultrabright (SDI cable and bulkhead included) NA17922S Nauticam Atomos Ninja V-S Gehäuse (SDI cable and Bulkhead are sold separately) Recommended SDI surface cables NA25064 SDI surface monitor cable in 15m length NA25065 SDI surface monitor cable of 45m length Vacuum test and humidity warning system . The Nauticam ALEXA 35 underwater housing is equipped with Nauticam's field-proven vacuum check and leak detection system, which provides constant üinformation on the housing's watertight and submersible status. By creating a slight vacuum in the housing with a reliable and compact hand pump, the system can ensure watertightness before entering the water and during the dive. A simple color-coded LED light system, clearly visible on the Rück side of the case, indicates to the user if the vacuum is stable or if the case is losing vacuum. Leak detection is integrated into the same circuit so that an audible and visual signal is emitted in the event of water ingress. The Nauticam system is temperature compensated, so false alarms due to changes in external temperature or camera heating during an action-packed dive are avoided.  

In additional to the large window for viewing the Raptor's 2.4" LCD screen, Nauticam offers an optional rear housing back for the Portkeys BM5WR monitor (16610).  This allows the monitor to be viewed by the camera operator from a natural filming position and provides an extremely streamlined system.  The monitor back features control buttons to access the various tools offered by the BM5WR.  

The RED Digital Cinema V-RAPTOR 8K VV is RED's latest flagship camera capable of recording REDCODE RAW in 8K resolution at up to 120 frames per second.  Combined with the Nauticam housing, it creates one of the smallest and easiest-to-use cinema systems on the market.  In addition, the Nauticam Raptor housing offers full control of the RED KOMODO through an optional camera sled.   RED Digital Cinema V-Raptor ST 8 X Cinema System The V-RAPTOR 8K camera features an 8K VV multi-format sensor with the ability to shoot 8K large format or 6K Super 35.  It has a dynamic range of more than 17 stops and can record R3D (REDCODE RAW) files directly onto CFexpress cards, eliminating the need for expensive proprietary media.  It also features Canon's new RF mount with full support for Canon's EF-to-EOS R lens adapter, so a wide range of focal lengths can be used.  The V-RAPTOR 8K VV is RED's most powerful camera to date and also one of the smallest cinema cameras available.  The feature set is clearly aimed at those who require professional specifications in a travel-friendly package, which accurately describes the majority of underwater filmmakers.   Important camera specifications: 8K VV 35,4 Megapixel CMOS Sensor (8192 x 4320) R3D files (REDCODE RAW) 17+ stops dynamic range Recording on CFexpress cards Canon RF lens mount Integrated Micro V-Lock battery interface Dual 12G SDI output Integrated 2.4" LCD screen with touch camera control Wireless control via smart phone Recording formats: REDCODE RAW 8K 8192 x 4320 at 120 fps 7K 7168 x 3780 at 140 fps 6K 6144 x 3240 at 160 fps 5K 5120 x 2700 at 192 fps 4K 4096 x 2160 at 240 fps 3K 3072 x 1620 at 320 fps 2K 2048 x 1080 at 480 fps REDCODE HQ 8K 8192 x 4320p with up to 60 fps  6K 6144 x 3240p up to 96 fps  4K 4096 x 2160p up to 240 fps  2K 2048 x 1080p up to 480 fps  REDCODE MQ 8K 8192 x 4320p up to 60 fps  6K 6144 x 3240p up to 160 fps  4K 4096 x 2160p up to 240 fps  2K 2048 x 1080p up to 480 fps  REDCODE LQ 8K 8192 x 4320p up to 120 fps  6K 6144 x 3240p up to 160 fps  4K 4096 x 2160p up to 240 fps  2K 2048 x 1080p up to 480 fps    RED Digital Cinema V-Raptor ST 8K Underwater Housing by Nauticam The enclosure supports both the RED V-RAPTOR 8K VV and the RED KOMODO through an optional insert (16250).  It has been designed in a similar way to the previous DSMC2 LT and Komodo housings to offer the most compact and travel-friendly system possible.  Raptor offers seamless integration with DSLR lenses and the same N120 connection system used in Nauticam DSLR and Cinema systems.  Enjoy unmatched user-friendly set-up and intuitive operation, including tool-free set-up and tear-down in minutes.  Batteries can be changed without removing the camera from the housing and lens changes are done in seconds.   The Nauticam Raptor housing uses the N120 Cinema Port system, which is shared with the other Nauticam cameras in the N120 platform and allows easy transition from other N120 Nauticam systems to the Nauticam Raptor. The N120 system also provides access to Nauticam's premium professional optics such as the WACP-1/2 and SMC-1/2. The housing also features adjustable handles with easy access to the cinema-style zoom and focus knobs.  On the top of the housing is a 1/4"-20 cheese plate that allows for a variety of accessory mounting points. In addition to Nauticam's traditional fully mechanical controls, the Raptor housing also features a set of backlit electronic controls.  These controls provide access to Iris+/-, Shut+/-, ISO+/-, WB on the left side of the housing and Pre-Record, FPS+/-, Playback, Play/Pause, Magnify and Tools on the top of the housing.   The Nauticam Raptor is covered by Nauticam's 2-year warranty. Lens support The RED V-RAPTOR 8K has a Canon RF lens mount, but Canon EF lenses are also supported through the Canon EF to EOS R adapter.  The Nauticam Raptor housing offers full support for Canon RF lenses along with the Canon EF to EOS R adapter and the Canon EF to EOS R adapter with variable ND filter or control ring.  On the left side of the housing is an easily accessible control wheel for smooth ND changes.  Regardless of the choice of EF or RF lens, changing lenses is quick and easy and requires no tools.  Note that when switching between RF and EF lenses, the camera must be removed from the housing to remove or install the RF-to-EF adapter.  Nauticam is constantly testing new lenses to offer optimised connection and extension combinations. Large cinema-style control wheels on the housing, within easy reach of the handles, allow precise manual focus and zoom control with the supported lenses when used with the appropriate lens kit.   The Nauticam Raptor housing, in conjunction with the 16410 N120-to-N200 port adapter, supports the use of selected cinema lenses and the associated N200 port system, as it is not limited to the use of DSLR lenses.  Installation is quick and easy and requires no tools, allowing seamless lens changes in the field - even when switching between DSLR and cinema lenses. Support for internal monitors In addition to the large viewing window for the Raptor's 2.4" LCD screen, Nauticam offers an optional rear housing for the Portkeys BM5WR monitor (16110).  This allows the monitor to be viewed by the cameraman from a natural filming position and provides an extremely slim system.  On the back of the monitor are control buttons for accessing the various tools of the BM5WR.   Support for external monitors The SmallHD 503 Ultrabright or Atomos Ninja V monitor can be mounted in the external Nauticam NA-503-S or Nauticam Atomos Ninja V-S enclosures and connected via SDI bulkheads and cables, allowing greater flexibility in positioning the monitor on the Nauticam Raptor enclosure.  SDI output Required accessories for the SDI cable system NA25058 M16 SDI-Bulkhead NA25060 SDI cable in 0.3 m length Recommended monitor housing NA17925S Nauticam NA-503-S Housing for Small HD 503 Ultrabright (SDI cable and bulkhead included) NA17922S Nauticam Atomos Ninja V-S Housing (SDI cable and bulkhead sold separately) Battery compatibility The RED V-RAPTOR 8K VV has an integrated Micro V-Lock battery interface.  Changing batteries is as easy as opening the housing, as the camera does not need to be removed to access the batteries.  The following batteries are supported in the housing: REDVOLT Micro-V 98Wh Anton Bauer Titon Micro V-Mount 45Wh/98Wh/140Wh bebob V-MICRO 45Wh/98Wh/150Wh/200Wh Core SWX NANO Micro 98Wh/147Wh Lithium-ion battery (V-mount) Fxlion NANO ONE/TWO Ultra Kompakt 50Wh/98Wh Hawk-Woods Mini V-Lok 14.4V 98Wh/150Wh Li-Ion battery IDX System Technology Imicro-150 14.5V 97Wh/145Wh Li-Ion V-Mount Battery SWIT PB-M98S 14.4V 98Wh Pocket Battery with D-Tap and USB Output (V-Mount) Ethernet remote control The Nauticam Raptor housing is designed to give the operator full control. However, it also supports an Ethernet surface feed in lengths of 5 m (Pole Cam) and 45 m (Studio). There is space in the housing to install a USB-C to Ethernet adapter, which would allow full control of the camera at the surface via the RedControl app.   Recommended Ethernet cables NA16261 Ethernet surface cable set in 45m length (incl. housing lemo bulkhead with integrated internal cable and external Duracell cables). NA16262 Replacement for enclosure Lemo Bulkhead with integrated Ethernet cable NA16263 Ethernet surface cable set in 5 m length (incl. housing Lemo Bulkhead with integrated inner cable and external Duracell cables). Vacuum control and leakage warning system The Nauticam Raptor housing features Nauticam's field-proven vacuum testing and leak detection system, which provides constant information on the housing's watertight and submersible status. By applying a light vacuum inside the housing using a reliable and compact hand pump, the system can ensure watertightness before entering the water and during the dive. A simple colour-coded LED lighting system, clearly visible on the back of the enclosure, indicates to the user if the vacuum is stable or if the enclosure is losing vacuum. Leak detection is integrated into the same circuitry so that an audible and visual signal sounds if water penetrates. The Nauticam system is temperature compensated so that false alarms due to changes in outside temperature or heating of the camera during an action-packed dive are avoided.    

THE RED KOMODO The Komodo camera features a 6K Super 35 sensor with up to 16 stops of dynamic range.  R3D files (REDCODE RAW) can be recorded directly to CFast 2.0 cards, eliminating the need for expensive proprietary media.  It also features Canon's new RF mount with full support of the Canon EF to EOS R lens adaptor allowing a wide variety of focal lengths to be used.  Komodo is RED's smallest form-factor and most economically priced camera to-date.  The feature set is clearly aimed at those requiring professional level specs in a travel-friendly package, which accurately describes the majority of underwater filmmakers.   Key Camera Specifications: 6K Super 35 Sensor (6144 x 3240) R3D Files (REDCODE RAW) Records to CFast 2.0 cards Canon RF Lens Mount Dual Battery Mount (Canon BP-955/975) 12G SDI Out Integrated LCD Screen with Touch Camera Control Wireless Control From a Smart Phone Global Shutter Mode Anamorphic Options Recording Formats: REDCODE RAW 6144 x 3240 at 40 fps 5120 x 2700 at 50 fps 4096 x 2160 at 60 fps 2048 x 1080 at 120 fps ProRes 422/ProRes 422HQ 4096 x 2160 up to 60 fps ProRes 422 2048 x 1080 up to 120 fps THE NAUTICAM KOMODO HOUSING The Nauticam Komodo housing is officially RED APPROVED.  The housing is engineered in a similar fashion to previous Epic LT and DSMC2 LT housings, providing the most compact and travel friendly system possible.  Komodo offers seamless integration with DSLR lenses and the same N120 port system used in Nauticam DSLR and Cinema systems.  Enjoy unmatched user friendly setup and intuitive operation including tool-less setup and tear down in minutes.  Batteries can be swapped without ever removing the camera from the housing, and lens changes can be accomplished in seconds.   The Nauticam Komodo housing uses the N120 Cinema port system, shared with Nauticam's other N120 platform cameras which allows for easy transition to the Nauticam Komodo from other N120 Nauticam systems. The N120 system also provides access to Nauticam's line of professional premium optics such as the WACP-1/2 and SMC-1/2. The housing also features adjustable handles with easy access to the cinema style zoom and focus knobs.  On top of the housing is a 1/4"-20 cheese plate which allows for a wide variety of accessory mounting points. The Nauticam Komodo is also backed by Nauticam's 2 year warranty. LENS SUPPORT The Komodo features a Canon RF lens mount, but currently RED is only offering support of Canon EF lenses.  The Nauticam Komodo housing offers full support of the Canon EF to EOS R Adaptor along with the Canon EF to EOS R Adaptor with Variable ND Filter.  The left side of the housing features an easily accessible command wheel for smooth ND changes.  Once RED releases RF lens support, the Nauticam Komodo housing will be ready and fully compatible.   Regardless of EF or RF lens selection, changing lenses is quick, easy and doesn't require any tools.  Note that when changing between RF and EF lenses, the camera must be removed from the housing to remove or install the RF to EF adapter.  Nauticam is constantly testing new lenses to provide optimized port and extension combinations. Large cinema-styled control wheels on the housing, located within easy reach of the handles, provide precise manual focus and zoom control with supported lenses when used with the corresponding lens gear set.   Not being limited to using DSLR lenses is crucial for cinema systems and the Nauticam Komodo housing, when used with the 16410 N120 to N200 Port Adapter can support the use of Cinema Lenses and the associated N200 Port System.  Installation is quick, easy and requires no tools allowing seamless lens switching in the field - even when changing between DSLR and Cinema lenses. INTERNAL MONITOR SUPPORT The Komodo has a built-in monitor on top of the camera. The Nauticam Komodo does feature a large window for using the Komodo's built in monitor to be used for an extremely streamlined solution.  If an additional monitoring options in requires, the Atomos Shinobi SDI monitor is an ideal lightweight monitoring solution for the RED Komodo.  The Shinobi Monitor Back option Komodo Housing supports the use of the Atomos Shinobi SDI monitor inside rear of the housing allowing the monitor to be viewed by the camera operator from a natural filming position.  The monitor back features control buttons for the on-screen buttons of the Shinobi.  EXTERNAL MONITOR SUPPORT The Atomos Shinobi SDI monitor can also be mounted in the external Nauticam NA-Shinobi-S housing and connected via SDI bulkheads and cables allowing greater flexibility when positioning the monitor on the Nauticam Komodo housing.  SDI OUTPUT Required accessories for SDI Cable System NA25058 M16 SDI Bulkhead NA25060 SDI Cable in 0.3m Length Recommended monitor housing NA17921 NA-502B-S Housing for SmallHD 502 Bright Monitor NA17924 NA-Shinobi-S Housing for Atomos Shinobi 5.2" 4K HDMI Monitor with SDI input BATTERY COMPATIBILITY The system supports Canon BP- batteries and the housing will fit up to two Canon BP-975 batteries with the standard housing back.  When using the Shinobi Monitor Back, dual BP-955 can be used. Swapping batteries in as simple as opening the housing as the camera does not need to be removed to access the batteries. ETHERNET REMOTE CONTROL While the Nauticam Komodo housing is engineered to allow for full control byt he operator, it also supports an ethernet surface feed in 5m (pole cam) and 45m (studio) lengths. Within the housing, there is space to install a small ethernet router which would allow for full control of the camera at the surface through the RedControl App.   Recommended Ethernet Cables NA16261 Ethernet Surface Cable Set in 45m length (Incl. housing lemo bulkhead with integrated internal cable and external Duracell cables) NA16262 Replacement of Housing Lemo Bulkhead with Integrated Ethernet Cable NA16263 Ethernet Surface Cable Set in 5 meter length (Incl. housing lemo bulkhead with integrated internal cable and external Duracell cables) VACUUM CHECK AND LEAK DETECTION SYSTEM The Nauticam Komodo housing features Nauticam's field-tested Vacuum Check and Leak Detection System that provides constant updates on the water tight and safe-to-dive status of the housing. By drawing a slight vacuum inside the housing using a reliable and compact manual hand-pump, the system is able to insure water-tightness before entering the water as well as throughout the dive. A simple color-coded LED lighting system, easily visible at the rear of the housing lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur. The Nauticam system is temperature compensated, eliminating false alarms caused by a change in outside temperature, or from a camera heating up on an action packed dive.  

THE RED KOMODO The Komodo camera features a 6K Super 35 sensor with up to 16 stops of dynamic range.  R3D files (REDCODE RAW) can be recorded directly to CFast 2.0 cards, eliminating the need for expensive proprietary media.  It also features Canon's new RF mount with full support of the Canon EF to EOS R lens adaptor allowing a wide variety of focal lengths to be used.  Komodo is RED's smallest form-factor and most economically priced camera to-date.  The feature set is clearly aimed at those requiring professional level specs in a travel-friendly package, which accurately describes the majority of underwater filmmakers.   Key Camera Specifications: 6K Super 35 Sensor (6144 x 3240) R3D Files (REDCODE RAW) Records to CFast 2.0 cards Canon RF Lens Mount Dual Battery Mount (Canon BP-955/975) 12G SDI Out Integrated LCD Screen with Touch Camera Control Wireless Control From a Smart Phone Global Shutter Mode Anamorphic Options Recording Formats: REDCODE RAW 6144 x 3240 at 40 fps 5120 x 2700 at 50 fps 4096 x 2160 at 60 fps 2048 x 1080 at 120 fps ProRes 422/ProRes 422HQ 4096 x 2160 up to 60 fps ProRes 422 2048 x 1080 up to 120 fps THE NAUTICAM KOMODO HOUSING The Nauticam Komodo housing is officially RED APPROVED.  The housing is engineered in a similar fashion to previous Epic LT and DSMC2 LT housings, providing the most compact and travel friendly system possible.  Komodo offers seamless integration with DSLR lenses and the same N120 port system used in Nauticam DSLR and Cinema systems.  Enjoy unmatched user friendly setup and intuitive operation including tool-less setup and tear down in minutes.  Batteries can be swapped without ever removing the camera from the housing, and lens changes can be accomplished in seconds.   The Nauticam Komodo housing uses the N120 Cinema port system, shared with Nauticam's other N120 platform cameras which allows for easy transition to the Nauticam Komodo from other N120 Nauticam systems. The N120 system also provides access to Nauticam's line of professional premium optics such as the WACP-1/2 and SMC-1/2. The housing also features adjustable handles with easy access to the cinema style zoom and focus knobs.  On top of the housing is a 1/4"-20 cheese plate which allows for a wide variety of accessory mounting Points. LENS SUPPORT The Komodo features a Canon RF lens mount, but currently RED is only offering support of Canon EF lenses.  The Nauticam Komodo housing offers full support of the Canon EF to EOS R Adaptor along with the Canon EF to EOS R Adaptor with Variable ND Filter.  The left side of the housing features an easily accessible command wheel for smooth ND changes.  Once RED releases RF lens support, the Nauticam Komodo housing will be ready and fully compatible.   Regardless of EF or RF lens selection, changing lenses is quick, easy and doesn't require any tools.  Note that when changing between RF and EF lenses, the camera must be removed from the housing to remove or install the RF to EF adapter.  Nauticam is constantly testing new lenses to provide optimized port and extension combinations. Large cinema-styled control wheels on the housing, located within easy reach of the handles, provide precise manual focus and zoom control with supported lenses when used with the corresponding lens gear set.   Not being limited to using DSLR lenses is crucial for cinema systems and the Nauticam Komodo housing, when used with the 16410 N120 to N200 Port Adapter can support the use of Cinema Lenses and the associated N200 Port System.  Installation is quick, easy and requires no tools allowing seamless lens switching in the field - even when changing between DSLR and Cinema lenses. INTERNAL MONITOR SUPPORT The Komodo has a built-in monitor on top of the camera. The Nauticam Komodo does feature a large window for using the Komodo's built in monitor to be used for an extremely streamlined solution.  If an additional monitoring options in requires, the Atomos Ninja V monitor is an ideal lightweight monitoring solution for the RED Komodo.  The Ninja V Monitor Back option Komodo Housing supports the use of the Atomos Ninja V monitor inside rear of the housing allowing the monitor to be viewed by the camera operator from a natural filming position.  The monitor back features control buttons for the on-screen buttons of the Shinobi.  EXTERNAL MONITOR SUPPORT The Atomos Shinobi SDI monitor can also be mounted in the external Nauticam NA-Shinobi-S housing and connected via SDI bulkheads and cables allowing greater flexibility when positioning the monitor on the Nauticam Komodo housing.  SDI OUTPUT Required accessories for SDI Cable System NA25058 M16 SDI Bulkhead NA25060 SDI Cable in 0.3m Length Recommended monitor housing NA17921 NA-502B-S Housing for SmallHD 502 Bright Monitor NA17924 NA-Shinobi-S Housing for Atomos Shinobi 5.2" 4K HDMI Monitor with SDI input BATTERY COMPATIBILITY The system supports Canon BP- batteries and the housing will fit up to two Canon BP-975 batteries with the standard housing back.  When using the Shinobi Monitor Back, dual BP-955 can be used. Swapping batteries in as simple as opening the housing as the camera does not need to be removed to access the batteries. ETHERNET REMOTE CONTROL While the Nauticam Komodo housing is engineered to allow for full control byt he operator, it also supports an ethernet surface feed in 5m (pole cam) and 45m (studio) lengths. Within the housing, there is space to install a small ethernet router which would allow for full control of the camera at the surface through the RedControl App.   Recommended Ethernet Cables NA16261 Ethernet Surface Cable Set in 45m length (Incl. housing lemo bulkhead with integrated internal cable and external Duracell cables) NA16262 Replacement of Housing Lemo Bulkhead with Integrated Ethernet Cable NA16263 Ethernet Surface Cable Set in 5 meter length (Incl. housing lemo bulkhead with integrated internal cable and external Duracell cables) VACUUM CHECK AND LEAK DETECTION SYSTEM The Nauticam Komodo housing features Nauticam's field-tested Vacuum Check and Leak Detection System that provides constant updates on the water tight and safe-to-dive status of the housing. By drawing a slight vacuum inside the housing using a reliable and compact manual hand-pump, the system is able to insure water-tightness before entering the water as well as throughout the dive. A simple color-coded LED lighting system, easily visible at the rear of the housing lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur. The Nauticam system is temperature compensated, eliminating false alarms caused by a change in outside temperature, or from a camera heating up on an action packed dive.  

THE RED KOMODO The Komodo camera features a 6K Super 35 sensor with up to 16 stops of dynamic range.  R3D files (REDCODE RAW) can be recorded directly to CFast 2.0 cards, eliminating the need for expensive proprietary media.  It also features Canon's new RF mount with full support of the Canon EF to EOS R lens adaptor allowing a wide variety of focal lengths to be used.  Komodo is RED's smallest form-factor and most economically priced camera to-date.  The feature set is clearly aimed at those requiring professional level specs in a travel-friendly package, which accurately describes the majority of underwater filmmakers.   Key Camera Specifications: 6K Super 35 Sensor (6144 x 3240) R3D Files (REDCODE RAW) Records to CFast 2.0 cards Canon RF Lens Mount Dual Battery Mount (Canon BP-955/975) 12G SDI Out Integrated LCD Screen with Touch Camera Control Wireless Control From a Smart Phone Global Shutter Mode Anamorphic Options Recording Formats: REDCODE RAW 6144 x 3240 at 40 fps 5120 x 2700 at 50 fps 4096 x 2160 at 60 fps 2048 x 1080 at 120 fps ProRes 422/ProRes 422HQ 4096 x 2160 up to 60 fps ProRes 422 2048 x 1080 up to 120 fps THE NAUTICAM KOMODO HOUSING The Nauticam Komodo housing is officially RED APPROVED.  The housing is engineered in a similar fashion to previous Epic LT and DSMC2 LT housings, providing the most compact and travel friendly system possible.  Komodo offers seamless integration with DSLR lenses and the same N120 port system used in Nauticam DSLR and Cinema systems.  Enjoy unmatched user friendly setup and intuitive operation including tool-less setup and tear down in minutes.  Batteries can be swapped without ever removing the camera from the housing, and lens changes can be accomplished in seconds.   The Nauticam Komodo housing uses the N120 Cinema port system, shared with Nauticam's other N120 platform cameras which allows for easy transition to the Nauticam Komodo from other N120 Nauticam systems. The N120 system also provides access to Nauticam's line of professional premium optics such as the WACP-1/2 and SMC-1/2. The housing also features adjustable handles with easy access to the cinema style zoom and focus knobs.  On top of the housing is a 1/4"-20 cheese plate which allows for a wide variety of accessory mounting points. The Nauticam Komodo is also backed by Nauticam's 2 year warranty. LENS SUPPORT The Komodo features a Canon RF lens mount, but currently RED is only offering support of Canon EF lenses.  The Nauticam Komodo housing offers full support of the Canon EF to EOS R Adaptor along with the Canon EF to EOS R Adaptor with Variable ND Filter.  The left side of the housing features an easily accessible command wheel for smooth ND changes.  Once RED releases RF lens support, the Nauticam Komodo housing will be ready and fully compatible.   Regardless of EF or RF lens selection, changing lenses is quick, easy and doesn't require any tools.  Note that when changing between RF and EF lenses, the camera must be removed from the housing to remove or install the RF to EF adapter.  Nauticam is constantly testing new lenses to provide optimized port and extension combinations. Large cinema-styled control wheels on the housing, located within easy reach of the handles, provide precise manual focus and zoom control with supported lenses when used with the corresponding lens gear set.   Not being limited to using DSLR lenses is crucial for cinema systems and the Nauticam Komodo housing, when used with the 16410 N120 to N200 Port Adapter can support the use of Cinema Lenses and the associated N200 Port System.  Installation is quick, easy and requires no tools allowing seamless lens switching in the field - even when changing between DSLR and Cinema lenses. INTERNAL MONITOR SUPPORT The Komodo has a built-in monitor on top of the camera. The Nauticam Komodo does feature a large window for using the Komodo's built in monitor to be used for an extremely streamlined solution.  If an additional monitoring options in requires, the Atomos Shinobi SDI monitor is an ideal lightweight monitoring solution for the RED Komodo.  The Shinobi Monitor Back option Komodo Housing supports the use of the Atomos Shinobi SDI monitor inside rear of the housing allowing the monitor to be viewed by the camera operator from a natural filming position.  The monitor back features control buttons for the on-screen buttons of the Shinobi.  EXTERNAL MONITOR SUPPORT The Atomos Shinobi SDI monitor can also be mounted in the external Nauticam NA-Shinobi-S housing and connected via SDI bulkheads and cables allowing greater flexibility when positioning the monitor on the Nauticam Komodo housing.  SDI OUTPUT Required accessories for SDI Cable System NA25058 M16 SDI Bulkhead NA25060 SDI Cable in 0.3m Length Recommended monitor housing NA17921 NA-502B-S Housing for SmallHD 502 Bright Monitor NA17924 NA-Shinobi-S Housing for Atomos Shinobi 5.2" 4K HDMI Monitor with SDI input BATTERY COMPATIBILITY The system supports Canon BP- batteries and the housing will fit up to two Canon BP-975 batteries with the standard housing back.  When using the Shinobi Monitor Back, dual BP-955 can be used. Swapping batteries in as simple as opening the housing as the camera does not need to be removed to access the batteries. ETHERNET REMOTE CONTROL While the Nauticam Komodo housing is engineered to allow for full control byt he operator, it also supports an ethernet surface feed in 5m (pole cam) and 45m (studio) lengths. Within the housing, there is space to install a small ethernet router which would allow for full control of the camera at the surface through the RedControl App.   Recommended Ethernet Cables NA16261 Ethernet Surface Cable Set in 45m length (Incl. housing lemo bulkhead with integrated internal cable and external Duracell cables) NA16262 Replacement of Housing Lemo Bulkhead with Integrated Ethernet Cable NA16263 Ethernet Surface Cable Set in 5 meter length (Incl. housing lemo bulkhead with integrated internal cable and external Duracell cables) VACUUM CHECK AND LEAK DETECTION SYSTEM The Nauticam Komodo housing features Nauticam's field-tested Vacuum Check and Leak Detection System that provides constant updates on the water tight and safe-to-dive status of the housing. By drawing a slight vacuum inside the housing using a reliable and compact manual hand-pump, the system is able to insure water-tightness before entering the water as well as throughout the dive. A simple color-coded LED lighting system, easily visible at the rear of the housing lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur. The Nauticam system is temperature compensated, eliminating false alarms caused by a change in outside temperature, or from a camera heating up on an action packed dive.  

THE RED WEAPON CAMERA BRAIN The RED cinema camera system revolves around the BRAIN which houses the sensor and to which all additional components are attached. This modular approach allows the user to use only the parts they need and create a streamlined purpose-fit rig. The RED Weapon works off the DSMC2 form factor, the smallest and lightest RED BRAIN to date. Weapon BRAINS can be purchased with one of three sensors, each with unique characteristics and resolutions. Monstro 8K VV Featuring the Vista Vision full-frame 8K sensor, this is the latest RED Weapon. The 35.4MP CMOS sensor offers full frame lens coverage and over 17 stops of dynamic range. Helium 8K S35 The Helium 8K 35.4MP CMOS sensor offers Super 35 format and received the highest rating of any sensor on DxOMark. Gemini 5K S35 Gemini is RED's highest sensitivity sensor to date and offers significantly increased performance in low-light settings and improved performance in shadows. Dragon-X 6K S35 Dragon-X features the industry workhorse and award-winning DRAGON sensor, now with IPP2, delivering 6K cinematic imagery in a Super 35 format. Additional Weapon Specs All Weapon BRAINS are capable of data write speeds of 300 MB/s and are able to write simultaneously in REDCODE RAW as well as Apple ProRes or Avid DNxHR/HD allowing for a faster and more streamlined post-processing workflow. 8K offers 17x more resolution than HD and 4x more than 4K allowing for unparalleled sharpness. RED DSMC2 BRAINS can be configured to accept Canon EF, Nikon, Leica-M or PL lenses by swapping lens mounts. Changing lens mounts is as simple as removing four screws. This also gives access to the OLPF which can also be swapped. THE NAUTICAM WEAPON LT UNDERWATER HOUSING The Nauticam Weapon LT housing is the smallest, lightest, and easiest to operate underwater housing for RED Cameras available. On location, the usability of this system is unmatched. Set up and tear down in minutes, easily swap batteries and recording media while the camera is mounted in the housing, and lens changes in seconds. The small size and light weight dramatically decrease resistance in water, especially when free diving. This version of the housing uses the N120 port system which allows for the use of even the largest diameter DSLR lenses such as the Canon Ultra-Wide Zoom EF 11-24mm f/4 USM. When paired with the Monstro VV sensor the Weapon will capture the full 126º05' rectilinear field of view. EXTERNAL MONITOR SUPPORT The Weapon LT housing supports the use of optional bulkheads to support a variety of external monitors with either SDI or LEMO connectivity. With LEMO support the use of the REDTOUCH monitor is possible removing the need for monitor battery changes as was necessary with SDI monitors like the SmallHD. INTEGRATED VACUUM CHECK AND LEAK DETECTION SYSTEM The Nauticam vacuum check and leak detection system is shipped with Weapon LT as standard equipment. Combined with an accessory vacuum valve (PN 25625), this monitoring system provides constant updates on the water tight and safe-to-dive status of the housing. A simple color coded LED lighting system lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur. The Nauticam system is temperature compensated, eliminating false alarms caused by a change in outside temperature, or from a camera heating up on an action packed dive. REQUIRED RED COMPONENTS: RED DSMC2 Sidekick - This allows control access within the housing. RED Lens Mount RED DSMC Canon Mount RED PL Mount if using this 16410 adaptor. Nauticam N120 Nikonos RS Lens Adaptor Battery Mount and Input/Output Adaptor RED DSMC2 V-Lock I/O Expander (All in one solution) RED DSMC2 Base Expander, plus one of the following: RED DSMC2 V-Lock Battery Module RED DSMC2 Redvolt XL Module Wooden Camera Cable-less V-Mount - This is most versatile as it allows you to mount the battery lower allowing taller batteries to fit within the housing. RED Mini-Mag SUPPORTED BATTERY CONFIGURATIONS: RED DSMC2 Redvolt XL Module Redvolt XL Battery   RED DSMC2 V-Lock I/O Expander 1 or 2 PAGLink PL96 or PL150 Batteries Switronix Hyper Core Slim IDX Endura CUE-D150 146Wh   RED DSMC2 Base Expander with Wooden Camera Cable-less V-Mount (low position) 1 or 2 PAGLink PL96 or PL150 Batteries Switronix Hyper Core Slim IDX Endure CUE-D150 146Wh RED Brick BLUESHAPE BV065-BV150 BLUESHAPE BV100HD-BV150HD BLUESHAPE BV100HD-BV150HD SPLASH BeBob V98RM Cine IDX Endura CUE-D150 146Wh SWIT S-8192S 92 +92Wh Split Style V-Mount   RED DSMC2 Base Expander with Element Technica V-Mount Module 1 or 2 PAGLink PL96 or PL150 Batteries Switronic Hyper Core Slim   RED DSMC2 Base Expander with Element Technica Gold Mount Moduler Anton Bauer Dionic HC *This list is only what has been tested and is not all encompassing.

THE Z CAM LINEUP The Z Cam flagship lineup is comprised of four models, the E2-F8, E2-F6, E2-S6, and the E2-M4.  The Nauticam NA-E2F housing will accommodate all four models.   Key Camera Specifications: E2-F8 8K 30fps, 6K 30fps, 4K 60fps, 10-bit color 12-Bit ProRes RAW Recording over HDMI to Atomos Ninja V Full Frame CMOS Sensor Dual native ISO 14 stops dynamic range ZRAW supported EF Mount Gigabit Ethernet for data, control, and live preview E2-F6 6K 60fps, 4K 120fps, 10-bit color 12-Bit ProRes RAW Recording over HDMI to Atomos Ninja V Full Frame CMOS Sensor 15 stops dynamic range ZRAW supported EF Mount Gigbit Ethernet for data, control, and live preview E2-S6 6K 60fps, 4K 100fps, 10-bit color 12-Bit ProRes RAW Recording over HDMI to Atomos Ninja V Super 35 CMOS Sensor 14 stops dynamic range ZRAW supported EF Mount Gigabit Ethernet for data, control, and live preview E2-M4 4K 160fps, 10-bit color 12-Bit ProRes RAW Recording over HDMI to Atomos Ninja V 4/3" WDR CMOS Sensor 13-15 stops dynamic range (16 stops with WDR enabled) ZRAW (partial debayer) MFT Mount Gigabit Ethernet for data, control, and live preview THE NAUTICAM NA-E2F HOUSING The NA-E2F follows suit with the original NA-E2 as one of the lightest and smallest raw-capable cinema housings ever produced. Nauticam has been a leader in cinema housings with offerings for RED, ARRI, Canon, PhantomFlex, Sony and now Z Cam. The NA-E2F uses the N120 Cinema port system, shared with Nauticam's other N120 platform cameras which allows for easy transition to the NA-E2F from other N120 Nauticam systems. The N120 system also provides access to Nauticam's line of professional premium optics such as the WACP-1/2 and SMC-1/2. The Z Cam E2-M4 can be used with either the Z Cam EF Mount or using the native MFT mount with Metabones EF-MFT Speed Booster Ultra 0.71x Adaptor.  When using the Metabones Speed Booster, the mounting position of the camera tray must be adjusted by the user.   There are 17 LANC control buttons ergonomically placed around the housing including dedicated iris+/iris-, record, focus near/focus far, eND+/eND-, and many more.  1/4"-20 size mounting threads are located on the top and bottom of the housing for easy mounting of cinema accessories. The NA-E2F supports an ethernet surface feed in 5m (pole cam) and 45m (studio) lengths.  The Z Cam E2 lineup offers a wide range of remote control options including live preview over ethernet.  This opens up the option of using an ethernet to lighting adaptor, then having an iPad or iPhone on the surface to allow monitoring and full control via the Z Cam app.   The housing also features adjustable handles with cinema style zoom and focus knobs.   The E2 lineup supports Sony NP-F series batteries and the NA-E2F matches this compatibility up to and including the FP-970. As with the NA-BMPCC2 and NA-E2, the NA-E2F allows for the internal mounting of a Samsung T-5 SSD drive as recording media making the transition from capture to edit seamless. The Z Cam E2 lineup requires an external monitor and Nauticam produces several options for both SmallHD and Atomos monitors.  To access the 12-Bit ProRes RAW Recording, you will need to use the Atomos Ninja V monitor with the Nauticam Ninja V housing. The NA-E2F features both an M28 and four M16 bulkheads supporting both HDMI 2.0 (M28) and HDMI 1.4 (M16) connections. HDMI OUTPUT Required accessories for HDMI 2.0 Cable System 25079 M28A2R210-M28A1R170 HDMI 2.0 Cable (for NA-GH5V/E2/E2F to use with Ninja V housing) 25088 Cable Clamp for NA-E2/E2F Housing with Screws Required accessories for HDMI 1.4 Cable System 16243 HDMI A-D Cable in 0.5m Length for RED DSMC2/C200/EVA1/E2 (for internal connection) 25033 standard HDMI bulkhead with M16 thread Recommended monitor housing 17922 Nauticam Atomos Ninja V Housing for Atomos Ninja V 5? Recorder/Monitor (with HDMI 2.0 support) 17920 NA-502B-H Housing for SmallHD 502 Bright Monitor (with HDMI 1.4 input support)