Techniques and innovations based on years of experience have resulted in an easy-to-use, highly professional product. Perfect handling of the Nikon D500 housing is made possible by adjustable grips that fit the human hand and make holding the camera very comfortable, even on long dives. Easy access to all important camera controls through clearly labelled, laser-engraved, durable buttons, even with gloves and dry-diving gloves. An easy and quick release camera mounting plate allows camera positioning and a lever locks the compartment inside the housing. The back door has a large scratch-resistant window glass for a fine camera display and optical viewfinder, and is completely separated from the front body to facilitate camera mounting. External viewfinders can be mounted, INON X-2 compatible. Open and close with one hand The housing for the Nikon D500 is locked with Isotta's one-handed, one-turn knob. It is the only single locking mechanism on the DSLR housing market. It's quick, easy and secure thanks to its double steel pins on the underside of the housing. Ports and extensions A range of connectors and extension rings are available in a dedicated section. The detachable port mounts to the Nikon D500 thanks to markers and a 120mm bayonet mount. The interchangeable port bodies and extension rings allow the use of most lenses on the market for maximum versatility and performance. TTL converter included The Nikon D500 housing features TTL converter electronics for automatic flash control. It also offers the possibility of using external flashes via two standard light connectors as well as two optional Nikonos sync cable bulkheads. This allows for easy mounting of all flash and lighting equipment.  Construction and safety Only the best materials are used in the manufacture of our enclosures, such as anodised aluminium, which is corrosion-resistant and thermally coated, and stainless steel. A durable product that requires easy and quick maintenance by the user. So small and so rich in technology! Two high quality O-ring seals protect and ensure perfect and safe waterproofing for all moving and / or removable parts; a red moisture / water alarm inside the housing is powered by a user replaceable battery. The working depth is 100 metres. Various accessories can be mounted by means of an M8 hole on the top of the enclosure and double threaded M6 holes on the bottom of the enclosure. Special features Ergonomic side grips, adjustable (via optional accessories) TTL converter electronics for automatic flash control included in scope of delivery Two fibre optic connectors Two sockets with electrical sync cable Rear housing is completely detachable from the front housing Locking compartment for easy camera mounting One-hand lock for the rear housing One M16 socket for mounting accessories, e.g. vacuum valves or monitors Aluminium buttons and dials with engraved symbols identical to the camera controls All camera controls are external Viewfinder glass with wide back Optical viewfinder Double O-ring seals on all buttons and removable parts Moisture alarm with LED and audible warning (replaceable battery) Removable port - 120mm bayonet Safety lock on ports to prevent accidental opening Wide, rubberised feet for firm footing M8 hole at the top of the housing for various accessories such as focus lamps Two M6 holes on the bottom of the body for various accessories such as flash or tripod mounts External viewfinders can be mounted, INON X-2 compatible

Techniques and innovations based on years of experience have resulted in an easy-to-use, highly professional product. Perfect handling of the Nikon D7500 housing is made possible by adjustable grips that fit the human hand and make holding the camera very comfortable, even on long dives. Easy access to all important camera controls through clearly labelled, laser-engraved, durable buttons, even with gloves and dry-diving gloves. An easy and quick release camera mounting plate allows camera positioning and a lever locks the compartment inside the housing. The back door has a large scratch-resistant window glass for a fine camera display and optical viewfinder, and is completely separated from the front body to facilitate camera mounting. External viewfinders can be mounted, INON X-2 compatible.  Open and close with one hand The housing for the Nikon D7500 is closed with the Isotta one-handed knob. It is the only single locking mechanism on the DSLR housing market. It is quick, easy and secure thanks to its double steel bolts on the underside of the housing. Ports and extension rings A range of connectors and extension rings are available in a dedicated section. The detachable port mounts to the Nikon D7500 thanks to markers and a 120mm bayonet mount. The interchangeable ports and extension rings allow the use of most lenses on the market for maximum versatility and performance. Light The housing for the Nikon D7500 offers the possibility to use external flashes via two standard light connectors as well as two Nikonos sync cable connectors. This allows for easy mounting of all flash and lighting equipment. Construction and safety Only the best materials are used in the manufacture of our enclosures, such as anodised aluminium, which is corrosion-resistant and thermally coated, and stainless steel. A durable product that requires easy and quick maintenance by the user. Two high quality O-ring seals protect and ensure perfect and safe waterproofing for all moving and removable parts; a red moisture/water alarm inside the housing is powered by a user replaceable battery. Working depth 100 metres. Various accessories can be attached using the M8 hole on the top of the housing and the double M6 threaded holes on the bottom of the housing. Special features Ergonomic side handles, adjustable (via optional accessories) Two fibre optic connections Two connections with electrical sync cable The rear housing is completely detachable from the front housing Locking compartment for easy camera mounting One-hand lock for the rear housing One M16 x 1 hole for mounting accessories, e.g. vacuum valves or monitors Aluminium buttons and dials with engraved symbols identical to the camera controls All camera controls are external Viewfinder glass with wide back Optical viewfinder Double O-ring seals on all buttons and removable parts Moisture sensor with LED and audible indicator (replaceable battery) Removable port - 120mm bayonet Safety lock on ports to prevent accidental opening Wide, rubberised feet for firm footing M8 hole at the top of the housing for various accessories such as focusing lights Two M6 holes on the bottom of the body for various accessories such as mounts for flashes or tripods External viewfinders can be mounted, INON X-2 compatible

The housing for Nikon D780 allows to capitalize on the camera full potential and to capture amazing pictures underwater. Product details An easy to use, highly professional product has been created through techniques and innovations gained from years of experience. The perfect handling of the Nikon D780 housing is possible by means of adjustable handles crafted to match the human hand and make holding the camera very comfortable even throughout long dives. Easy access to all key/main camera controls by means of clearly labelled laser-engraved longlasting buttons, even with gloves and drysuit gloves. An easy and quick release camera mounting plate allows the camera positioning and a lever locks the tray inside the housing. The back door has a large window anti-scratch glass for a fine camera display and optical viewfinder view and it is entirely detached from the front body to make easier the camera fitting. External viewfinders can be mounted, INON X-2 compatible. ONE HAND OPEN/CLOSE The housing for Nikon D780 is closed with Isotta?s single handed one-turn knob. It?s the only single latch closing mechanism in the DSLR housing market. It?s fast, simple and secure thanks to its double steel pins at the bottom of the housing. PORTS AND EXTENSION RING A series of ports and extension rings are available in dedicated section. The removable port is fitted thanks to markers and a bayonet 120 mm connection to the Nikon D780. The interchangeable port bodies and extensions rings combine to allow the use of most of lenses on the market for maximum versatility and performance. TTL CONVERTER FLASH (optional) The housing for Nikon D780 features TTL Converter Electronics for Automatic flash control. It also offers the possibility to use external strobes via two standard optical light ports (trigger not included) as well as two optional Nikonos N5 or S6 sync cord bulkheads. This allows for easy mounting of any strobe and lighting set up. CONSTRUCTION AND SAFETY Only the best materials are used to manufacture our housings such anodized aluminum which is anticorodal and thermo-coated and stainless steel. A longlasting product that requires easy and simple maintenance by the user. So small and so rich in technology! Dual high-quality O-Ring seals protect and ensure a perfect and secure watertight for all movable and / or removable parts; a red alarm for humidity/water inside the housing is powered by a battery replaceable by the user. Working depth is 100 metres. Different accessories can be fitted by means of an M8 hole positioned on the upper side of the housing and double threaded M6 holes located on housing bottom side. Highlights: Ergonomic side handles, adjustable (via optional accessory) TTL converter electronics for automatic flash control not icluded Two fiber optic connectors Two electrical sync cord bulkheads Nikonos N5 or S6 not included Back housing completely detachable from the front housing Tray with lock for an easy fitting of the camera; Single-hand closing knob for back housing Two M16 holes for installation of accessories, e.g. vacuum valves or monitors Aluminum buttons and dials with engraved symbols identical to camera controls All camera controls are external Wide back display viewfinder glass Optical viewfinder and top window for display Double O-Ring seals on all buttons and removable parts Moisture alarm with LED and an acoustic warning signal (replaceable battery) Removable port - 120mm bayonet Ports security latch to prevent accidental opening Wide, rubber covered feet for solid footing M8 hole located on upper side of the housing for various accessories such as focus lights Two M6 holes located on housing bottom side for different accessories such as brackets for strobes or tripod External viewfinders can be mounted, INON X-2 compatible

Techniques and innovations based on years of experience have resulted in an easy-to-use, highly professional product. Perfect handling of the Nikon D810 body is made possible by adjustable grips that fit the human hand and make holding the camera very comfortable, even on long dives. Easy access to all important camera controls through clearly labelled, laser-engraved, durable buttons, even with gloves and dry-diving gloves. An easy and quick release camera mounting plate allows camera positioning and a lever locks the compartment inside the housing. The back door has a large scratch-resistant window glass for a fine camera display and optical viewfinder, and is completely separated from the front body to facilitate camera mounting. External viewfinders can be mounted, INON X-2 compatible.  Opening and closing with one hand The housing for Nikon D810 is locked with Isotta's one-handed one-turn knob. It is the only single locking mechanism on the DSLR housing market. It's quick, easy and secure thanks to its double steel bolts on the underside of the housing. Ports and extension rings A range of ports and extension rings are available in a dedicated section. The detachable port mounts to the Nikon D810 thanks to markers and a 120mm bayonet mount. The interchangeable port and extension rings allow the use of most lenses on the market for maximum versatility and performance. Light The housing for the Nikon D810 offers the possibility to use external flashes via two standard light connectors. This allows easy mounting of all flash and lighting equipment. Connectors for electric flash cables are optionally available. Talk to us! Construction and safety Only the best materials are used in the manufacture of our enclosures, such as anodised aluminium, which is corrosion-resistant and thermally coated, and stainless steel. A durable product that requires easy and quick maintenance by the user. Two high quality O-ring seals protect and ensure perfect and safe waterproofing for all moving and removable parts; a red moisture/water alarm inside the housing is powered by a user replaceable battery. Working depth 100 metres. Various accessories can be attached using the M8 hole on the top of the housing and the double M6 threaded holes on the bottom of the housing. Special features: Ergonomic side handles, adjustable (via optional accessories) Two fibre optic connections Two connections with electrical sync cable The rear housing is completely detachable from the front housing Locking compartment for easy camera mounting One-hand lock for the rear housing One M16 connector for installation of accessories, e.g. vacuum valves or monitors Aluminium buttons and dials with engraved symbols identical to the camera controls All camera controls are external Viewfinder glass with wide back Optical viewfinder Double O-ring seals on all buttons and removable parts Moisture sensor with LED and audible indicator (replaceable battery) Removable port - 120mm bayonet Safety lock on ports to prevent accidental opening Wide, rubberised feet for firm footing M8 hole at the top of the housing for various accessories such as focusing lights; Two M6 threads on the bottom of the body for various accessories such as mounts for flashes or tripods External viewfinders can be mounted, INON X-2 compatible

The Isotta underwater housing for Nikon D850 allows to capitalize on the camera full potential and to capture amazing pictures underwater. Product details Isotta underwater housing for Nikon D850 An easy to use, highly professional product has been created through techniques and innovations gained from years of experience. The perfect handling of the Nikon D850 housing is possible by means of adjustable handles crafted to match the human hand and make holding the camera very comfortable even throughout long dives. Easy access to all key/main camera controls by means of clearly labelled laser-engraved longlasting buttons, even with gloves and drysuit gloves. An easy and quick release camera mounting plate allows the camera positioning and a lever locks the tray inside the housing. The back door has a large window anti-scratch glass for a fine camera display and optical viewfinder view and it is entirely detached from the front body to make easier the camera fitting. External viewfinders can be mounted, INON X-2 compatible.   ONE HAND OPEN/CLOSE The housing for Nikon D850 is closed with Isotta’s single handed one-turn knob. It’s the only single latch closing mechanism in the DSLR housing market. It’s fast, simple and secure thanks to its double steel pins at the bottom of the housing. PORTS AND EXTENSION RING A series of ports and extension rings are available in dedicated section. The removable port is fitted thanks to markers and a bayonet 120 mm connection to the Nikon D850. The interchangeable port bodies and extensions rings combine to allow the use of most of lenses on the market for maximum versatility and performance. TTL CONVERTER FLASH (optional) The housing for Nikon D850 features TTL Converter Electronics for Automatic flash control. It also offers the possibility to use external strobes via two standard optical light ports (trigger not included) as well as two optional Nikonos N5 or S6 sync cord bulkheads. This allows for easy mounting of any strobe and lighting set up. CONSTRUCTION AND SAFETY Only the best materials are used to manufacture our housings such anodized aluminum which is anticorodal and thermo-coated and stainless steel. A longlasting product that requires easy and simple maintenance by the user. Dual high-quality O-Ring seals protect and ensure a perfect and secure watertight for all movable and / or removable parts; a red alarm for humidity/water inside the housing is powered by a battery replaceable by the user. Working depth is 100 metres. Different accessories can be fitted by means of an M8 hole positioned on the upper side of the housing and double threaded M6 holes located on housing bottom side. Highlights Ergonomic side handles, adjustable (via optional accessory) TTL converter electronics for automatic flash control not included Two fiber optic connectors (included) Two electrical sync cord bulkheads Nikonos N5 or S6 not included Back housing completely detachable from the front housing Tray with lock for an easy fitting of the camera Single-hand closing knob for back housing One M16 hole for installation of accessories, e.g. vacuum valves or monitors Aluminum buttons and dials with engraved symbols identical to camera controls All camera controls are external Wide back display viewfinder glass Optical viewfinder Double O-Ring seals on all buttons and removable parts Moisture alarm with LED and an acoustic warning signal (replaceable battery) Removable port - 120mm bayonet Ports security latch to prevent accidental opening Wide, rubber covered feet for solid footing M8 hole located on upper side of the housing for various accessories such as focus lights Two M6 holes located on housing bottom side for different accessories such as brackets for strobes or tripods External viewfinders can be mounted, INON X-2 compatible

Its superior ergonomic design and standout range of optional accessories help you capture those optimal moments with the best image Quality. Much lighter than previous housings. Using unprecedented precision machining, the dimensions of the housing are similar to those of the camera. In addition, the revised internal design has also helped reduce weight. The MDX-D850 is approximately 11% (350g/12.3oz) lighter than the previous MDX-D810 housing. All the dials have a spring (damper) to prevent slip of the controls All the dials have a spring (damper) to prevent slip of the controls even if the dimensions of the cameras are slightly different or even if gears or other parts wear out to some extent.  Leak Alarm Unit as standard equipment The Leak Alarm Unit, which was previously available as an option, is now included as standard equipment. It is effective not only for early detection of underwater flooding accidents, but also for protection of equipment by checking its waterproof performance before entry. CR2032 lithium battery included. Optical YS Converter/N1 can be built into the housing Optical YS Converter/N1 can be built into the housing Compatible with Optical YS Converter/N1 for MDX housing which converts the camera’s hot-shoeTTL signal to a light signal. Both TTL and manual strobe modes can be used and controlled from the housing using a Fiber-Optic Cable II. * Fiber-Optic Cable ll is required when using the Optical YS Converter. * Serial numbers 124000274 and above are compatible with the Nikon D850. Serial numbers below 124000274 are not compatible. New firmware and/or conversion of the converter will be required. Other Features The Port Lock prevents the port from turning or loosening and the Port Lock lever is specifically located to avoid being unlocked accidentally. The housing is equipped with a lens-lock release button which makes it possible to change lenses easily, without opening the housing. The camera’s diopter adjustment dial can be operated from outside the housing. This feature is useful when two or more people with different eyesight use the housing. Pulling out the Focus/Zoom Dial gives sufficient room inside the housing to easily accommodate larger diameter lenses. All controls have luminescence stickers which glow in dark environment. Equipped with the Optical Viewfinder 0.5x as standard. Other optional viewfinders such as the VF180 1.2x, VF45 1.2x and Optical Viewfinder 0.8x can be used. *When the VF180 1.2x is mounted on the MDX-D850 housing, the lower part of the camera's viewfinder (where the shooting data is displayed) cannot be viewed due to vignetting. Sync Cord 2-pin Connector enables use of conventional hardwired Sync cable (Manual mode only). Accessory port enables use of Leak Sentinel (vacuum sensor). Equipped with two sacrificial zinc diodes (one on the front case and the other on the rear) to prevent electrolysis damage. Built-in leak sensor immediately alerts you to water ingress. Tripod screw mount is located on the centre underside of the housing.

Compact design. Due to the compact design and light weight of the Z7 / Z6 camera, the housing has been adapted accordingly to enhance these features. Compared to the SLR MDX-850 camera body, the MDX-Z7/Z6 is 100g lighter on land.  Ports and lens rings for the MDX series SLR housings can be used. With the FTZ adapter and the ports and lens rings for the MDX series bodies, you can use F-mount lenses. Compatible with the YS optical converter/N1. TTL flash photography possible. An optional optical YS converter, which converts the camera's hot shoe TTL signal into an LED light signal, is compatible with the housing. Manual flash photography is also possible. Designed for F-mount lenses with the FTZ mounting adapter and Z-mount lenses. The focus/zoom gear has two gears, one for F-mount lenses with the FTZ mounting adapter and the other for Z-mount lenses. The MDX-Z7 is designed to accommodate various Z-mount lenses that will be available soon. The upper control panel of the camera is visible. A window for the upper control panel of the camera is also integrated. As the brightness of the camera's upper control panel has increased, visibility is now significantly improved.  The port lock prevents the port from turning or coming loose, and the port lock lever is specially positioned to prevent accidental unlocking. The body is equipped with a lens release button that allows for easy lens changes without opening the body. Pulling out the focus/zoom wheel provides enough space inside the housing to easily accommodate larger diameter lenses. The camera's diopter adjustment knob can be operated from outside the housing. This feature is useful when two or more people with different eyesight use the housing. All controls have luminescent stickers that glow in dark environments. Equipped with the 0.5x optical viewfinder as standard. Other optional viewfinders such as the 0.66x and 0.8x optical viewfinders can be used. When the VF45 and VF180 1.2x are mounted on the body, the corners of the camera's viewfinder cannot be viewed due to vignetting.  The 2-pin sync cable connector allows the use of a conventional hard-wired sync cable (manual mode only). Equipped with two sacrificial zinc diodes (one on the front and the other on the back) to prevent electrolyte damage.

An ergonomic highly professional product entirely Made in Italy that offers the highest quality and enhanced performance underwater. Product details The durable anodized aluminum protects the camera from water and other damaging elements and its stylish, compact and ergonomic design has been specifically created for the breakthrough models of mirrorless Nikon Z7 / Z6. The perfect handling of the Isotta signature-red color Nikon Z7/6 housing is possible by means of adjustable handles crafted to match the human hand and make holding the camera very comfortable even throughout long dives. Easy access to all key/main camera controls by means of clearly labelled laser-engraved longlasting buttons, even with gloves and drysuit gloves. An quick release camera mounting plate allows the camera positioning and a lever locks the tray inside the housing. The back door has a large window anti-scratch glass for a fine camera display and optical viewfinder view and it is entirely detached from the front body to make easier the camera fitting. External viewfinders can be mounted, INON X-2 compatible. ONE HAND OPEN/CLOSE The housing for Nikon Z7 / Z6 is closed with Isotta’s single handed one-turn knob. It’s the only single latch closing mechanism in the DSLR housing market. It’s fast, simple and secure thanks to its double steel pins at the bottom of the housing. PORTS AND EXTENSION RING A series of ports and extension rings are available in dedicated section. The removable port is fitted thanks to markers and a bayonet 120 mm connection to the Nikon Z7 / Z6. The housing has been made on purpose to fit the Nikon FTZ adapter, which does let you use Nikon F-mount lenses on the Z7 – with varying degrees of compatibility. The interchangeable port bodies and extensions rings combine to allow the use of most of lenses on the market for maximum versatility and performance. CONSTRUCTION AND SAFETY Only the best materials are used to manufacture our housings such anodized aluminum which is anticorodal and thermo-coated and stainless steel. A longlasting product that requires easy and simple maintenance by the user. Dual high-quality O-Ring seals protect and ensure a perfect and secure watertight for all movable and / or removable parts; a red alarm for humidity/water inside the housing is powered by a battery replaceable by the user. Working depth is 100 metres. Different accessories can be fitted by means of one M8 hole positioned on the upper side of the housing and two threaded M6 holes located on housing bottom side. Three M16 x1 threaded holes can be used for different needs such as to accomodate a vacuum. Controls ON/OFF of Nikon Z7 / Z6 Ergonomic camera focusing and shutter button for an easy use with gloves Lens release Rear control panel Upper control panel All controls are available on the housing Highlights Ergonomic side handles, adjustable (via optional accessory) Two fiber optic connections Two optional electrical sync cord bulkheads Back housing completely detachable from the front housing Dedicated REC lever and ISO button Tray with lock for an easy fitting of the camera Single-hand closing knob for back housing Three M16 hole for installation of accessories, e.g. vacuum valves or monitors Aluminum buttons and dials with engraved symbols identical to camera controls All camera controls are external Wide back display viewfinder glass Optical viewfinder Double O-Ring seals on all buttons and removable parts Moisture alarm with LED and an acoustic warning signal (replaceable battery) Removable port - 120mm bayonet Ports security latch to prevent accidental opening Wide, rubber covered feet for solid footing One M8 hole located on upper side of the housing for various accessories such as focus lights Two M6 holes located on housing bottom side for different accessories such as brackets for strobes or tripods External viewfinders can be mounted, INON X-2 compatible

An ergonomic highly professional product entirely Made in Italy that offers the highest quality and enhanced performance underwater. The Nikon Z7 II / Z6 II Underwater Housing by Isotta The durable anodized aluminum protects the camera from water and other damaging elements and its stylish, compact and ergonomic design has been specifically created for the breakthrough models of mirrorless Nikon Z7 / Z6 and Nikon Z7 II / Z6 II. The perfect handling of the Isotta signature-red color Nikon Z7/6 housing is possible by means of adjustable handles crafted to match the human hand and make holding the camera very comfortable even throughout long dives. Easy access to all key/main camera controls by means of clearly labelled laser-engraved longlasting buttons, even with gloves and drysuit gloves. An quick release camera mounting plate allows the camera positioning and a lever locks the tray inside the housing. The back door has a large window anti-scratch glass for a fine camera display and optical viewfinder view and it is entirely detached from the front body to make easier the camera fitting. External viewfinders can be mounted, INON X-2 compatible. ONE HAND OPEN/CLOSE The Isotta underwater housing for Nikon Z7 II / 6 II is closed with Isotta’s single handed one-turn knob. It’s the only single latch closing mechanism in the DSLR housing market. It’s fast, simple and secure thanks to its double steel pins at the bottom of the housing. PORTS AND EXTENSION RING A series of ports and extension rings are available in dedicated section. The removable port is fitted thanks to markers and a bayonet 120 mm connection to the Nikon Z7 II / Z6 II. The housing has been made on purpose to fit the Nikon FTZ adapter, which does let you use Nikon F-mount lenses on the Z7 – with varying degrees of compatibility. The interchangeable port bodies and extensions rings combine to allow the use of most of lenses on the market for maximum versatility and performance. CONSTRUCTION AND SAFETY Only the best materials are used to manufacture our housings such anodized aluminum which is anticorodal and thermo-coated and stainless steel. A longlasting product that requires easy and simple maintenance by the user. Dual high-quality O-Ring seals protect and ensure a perfect and secure watertight for all movable and / or removable parts; a red alarm for humidity/water inside the housing is powered by a battery replaceable by the user. Working depth is 100 metres. Different accessories can be fitted by means of one M8 hole positioned on the upper side of the housing and two threaded M6 holes located on housing bottom side. Three M16 x1 threaded holes can be used for different needs such as to accomodate a vacuum. Controls ON/OFF of Nikon Z7 II / Z6 II Ergonomic camera focusing and shutter button for an easy use with gloves Lens release Rear control panel Upper control panel All controls are available on the housing Highlights Ergonomic side handles, adjustable (via optional accessory) Two fiber optic connections Two optional electrical sync cord bulkheads Back housing completely detachable from the front housing Dedicated REC lever and ISO button Tray with lock for an easy fitting of the camera Single-hand closing knob for back housing Three M16 hole for installation of accessories, e.g. vacuum valves or monitors Aluminum buttons and dials with engraved symbols identical to camera controls All camera controls are external Wide back display viewfinder glass Optical viewfinder Double O-Ring seals on all buttons and removable parts Moisture alarm with LED and an acoustic warning signal (replaceable battery) Removable port - 120mm bayonet Ports security latch to prevent accidental opening Wide, rubber covered feet for solid footing One M8 hole located on upper side of the housing for various accessories such as focus lights Two M6 holes located on housing bottom side for different accessories such as brackets for strobes or tripods External viewfinders can be mounted, INON X-2 compatible

THE NIKON Z 6II AND Z 7II CAMERAS For many full-frame Nikon shooters the appeal of a mirrorless camera had been tempered by the thought of having to invest in and master a new system by moving to another ecosystem such as Sony. For those awaiting a mirrorless system that utilized Nikon imaging technology and ergonomics, the wait is over. The Z 6II and Z 7II cameras feature an identical body, differing only in their feature sets, an ideal feature when it comes to housing the camera for underwater use.  Each camera also features dual EXPEED 6 image processor to significantly improve autofocus and continuous speed shooting.   Both camera bodies are built around Nikon's Z-mount. With an incredibly wide 55mm mount diameter (17% larger than F-mount) and very short flange distance, the Z-mount is able to offer a maximum aperture of F0.95. While the current range of Z-mount lenses continues to grow, almost the entire line of F-mount lenses is usable with the optional Nikon FTZ Adapter. When using the adapter, even non VR lenses benefit from the camera's in-body stabilization. VR and Z-Mount lenses receive 5-axis stabilization whereas non-VR F-mount lenses have access to 3-axis stabilization. There is also a dedicated e-VR (electronic VR) that combines optical and electronic stabilization for video shooting. Both the Z 6II and Z 7II will be able to capture internal UHD 4K at 60fps or 1080 HD at up to 120fps.  The Z 6II will be able to record 4K/60P early in 2021 through an expected firmware update.  In addition to N-Log, both cameras also feature HLG (hybrid-log gamma for HDR) which work in 10-bit 4:2:2 over HDMI 2.0 to an external recorder such as the Ninja V.   The OLED electronic viewfinder (EVF) of both the Z 6II and Z 7II gives 100% frame coverage at Quad-VGA (3.69M dot) resolution. When triggering external flashes, both cameras feature a 1/200 X-sync shutter speed. THE NIKON Z 7II CAMERA The Z 7II features a high resolution 45.7MP FX-format sensor that can shoot at up to 10FPS. The Z 7II features a wide ISO range of 64-25,600. Autofocus is achieved with 493 on-sensor AF points that cover 90% of the frame and the camera intelligently switches between contrast-detection and phase-detection points to achieve accurate focus regardless of light conditions. KEY CAMERA SPECS: 45.7MP FX Format Sensor with no OLPF 10 FPS continuous shooting 64-25,600 ISO Range UHD 4K 60p recording with 1.08x crop 10bit UHD 4K N-log output via HDMI with start/stop support 5-axis VR stabilization (with Z lenses) 3.69M-dot EVF, 3.2" 2.1M-dot rear screen -3EV focusing with F2.0 lens 1 CFExpress / XQD card slot, 1 UHS-II SD card slot THE NIKON Z 6II CAMERA The Z 6II is equipped with a 24.5MP FX-format sensor capable of up to 14FPS continuous shooting with an ISO range of 100-51,200. Video is currently recorded internally at up to UHD 4K 30p.  UHD 4K 60p with a 1.6x crop will be available in early 2021 through a firmware update. 273 on-sensor focus points cover 90% of the fame and the Z 6II intelligently switches between contrast-detection and phase-detection points to assure accurate autofocus. KEY CAMERA SPECS: 24.5MP FX Format Sensor with OLPF 14 FPS continuous shooting 100-51,200 ISO Range Full Sensor UHD 4K 30p  UHD 4K 60p recording with 1.6x crop (firmware update early 2021) 10bit N-log UHD 4K output via HDMI with start/stop support 5-axis VR stabilization (with Z-mount lenses) 3.6m-Dot OLED Electronic Viewfinder Two card slots (1x CFexpress/XQD, 1x UHS-II SD) THE NAUTICAM NA-Z7II UNDERWATER HOUSING The NA-Z7II underwater housing follows suit with Nauticam's drive for innovation. Both the Nikon Z 6II and Z 7II present shooters with the ability to use both the available legacy F Mount lenses via the FTZ adapter in addition to their native Z Mount optics.  To support both the legacy and native lenses, Nauticam has integrated the NA-Z7II into the N120 port system.  This is critical as the new Z mount lenses are being phased in over the next few years. The Nauticam NA-Z7II housing features two lens release buttons that correspond to either F or Z mount lenses. When switching between F and Z mount lenses, the camera must be removed from the housing to remove the adapter. When working within either the F or Z mount system use the appropriate lens release button to switch lenses without having to remove the camera from the housing. A vacuum system reset switch is located below the tray as well so there is no need to open the rear of the housing during lens or port changes. The NA-Z7II is part of the N120 port system which allows for full support of Nikon F mount lenses with the same ports needed for their application on Nikon SLR housings. As more Z mount lenses become available Nauticam will add supported configurations. INTELLIGENT CONTROL PLACEMENT Nauticam engineers are obsessed with functionality and this is evident in the location of essential controls. Regardless of where the control is located on the camera, the Nauticam housing puts them where you need them to be underwater. For those switching between photo and video modes, an easily reachable switch is located on the right rear of the housing. The right side double thumb lever, easily reached from the right handle features access to the AF-on and Record buttons respectively. Between the double thumb lever and the multi-stage shutter release is an ISO lever allowing quick changes to sensitivity. The left double thumb lever accesses the DISP and Playback controls. The Zoom In and Zoom Out controls, located on the right rear of the camera body is relocated to the left side of the housing to a location more familiar to Nauticam housing users. The switch that allows for switching between the LCD display and the EVF, a crucial and much used control with mirrorless systems is located close to the left handle within easy reach. Front and rear control dials are readily accessible by the familiar large knurled dials at the right handle. The ergonomic housing handles are rubberized and feature stainless steel stiffening brackets to ensure a stable platform when using large strobes or video lights attached to the pre-installed 1" mounting balls. FLASH TRIGGERING The NA-Z7II comes with Nauticam's self powered manual flash trigger preinstalled. The flash trigger plugs into the hot-shoe of the camera and uses LED lights recessed into each of the two optical bulkheads to trigger supported underwater flashes when used with the correct fiber optic connection. The flash trigger is powered by coin cell batteries that provide thousands of flashes per battery. The flash trigger can be upgraded to support TTL triggering (PN 26308 TTL Converter for Nikon). INTEGRATED VACUUM CHECK AND LEAK DETECTION SYSTEM The Nauticam vacuum check and leak detection system is shipped with NA-Z7II as standard equipment. Combined with an accessory M16 vacuum valve (PN 25625), this monitoring system provides constant updates on the water tight and safe-to-dive status of the housing. A simple color coded LED lighting system lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur. The Nauticam system is temperature compensated, eliminating false alarms caused by a change in outside temperature, or from a camera heating up on an action packed dive. PREMIUM PROFESSIONAL OPTICS Optical performance is just as necessary as camera performance and this becomes even more critical given the challenges of filming underwater. The Nauticam NA-Z7II uses the same N120 Port System as the previous NA-Z7 which makes for a seamless transition for those upgrading to the "II." While this system provides exceptional optical-glass and flat port solutions for a wide variety of F and Z Mount lenses, the real power of the Z 6II and Z 7II can be realized using Nauticam's Water Contact Optics. This lineup of dry and wet lenses are conceived using commercial lens-design software to achieve truly unparalleled underwater image quality both for stills and video in both macro and wide-angle situations. The WACP-1 and WACP-2 achieve ultra-wide 130º fields-of-view with reduced distortion over conventional optics while featuring ~0" minimum focus distances, zoom through capabilities and unbeatable corner sharpness at even wide-open apertures such as F5.6. The SMC-1 and SMC-2 macro wet-optics, when used with the Nikon 105mm f/2.8G VR macro lens provide 2x and 4x magnification respectively and the SMC-1 actually provides a resulting image with increased contrast and sharpness than the 105mm lens itself can achieve in air without a magnifier. HDMI Recommended Configurations For HDMI 2.0 Cable System NA25089 M28 adaptor for HDMI 2.0 Cable NA25085 M28C1R200-M28A1R170 HDMI 2.0 Cable for NA-Z7V/Z7II and NA-Ninja V For HDMI 1.4 Cable System NA25033 Standard HDMI Cable with M16 Thread NA25080 M28-M16 Step Down Adaptor NA25036 HDMI (D-C) cable in 190mm length

State-of-the-art housing for the full-frame mirrorless Nikon Z7II/Z6II/Z7/Z6 camera. Compact, compatible with the Optical YS Converter and ergonomically designed. Compact design The housing of the Z7/6 camera, as well as the Z7/6 II, takes advantage of the compact design and light weight and has been designed accordingly to enhance these features. Compared to the MDX-850 SLR camera body, the MDX-Z7/6 is 100 grams lighter on land. Ports and gears for the MDX series SLR housings can be used. An optional Optical YS Converter which converts the camera’s hot-shoe TTL signal into an LED light signal is compatible with the housing. Manual strobe photography is also possible. Designed for both F mount lenses with the mount adapter FTZ and Z mount lenses. The Focus/Zoom dial has two gears, one for F-mount lenses with the mount adapter FTZ and the other for Z mount lenses. The MDX-Z7 has been designed to take into consideration various Z mount lenses which will soon be available.   Entwickelt für F-Mount-Objektive mit Adapter FTZ und Z-Mount-Objektive. Das Fokus/Zoom-Drehrad hat zwei Zahnräder, eines für F-Mount-Objektive mit dem Anschlussadapter FTZ und das andere für Z-Mount-Objektive. Das MDX-Z7 wurde für die Berücksichtigung verschiedener Z-Mount-Objektive entwickelt, die in Kürze erhältlich sein werden. The camera’s upper control panel can be seen. A window for the camera’s upper control panel is also incorporated. As brightness of the camera’s upper control panel has increased, the visibility is now greatly improved. MDX-Z7? Other Features The Port Lock prevents the port from turning or loosening and the Port Lock lever is specifically located to avoid being unlocked accidentally. The housing is equipped with a lens-lock release button which makes it possible to change lenses easily, without opening the housing. Pulling out the Focus/Zoom Dial gives sufficient room inside the housing to easily accommodate larger diameter lenses. The camera’s diopter adjustment dial can be operated from outside the housing. This feature is useful when two or more people with different eyesight use the housing. All controls have luminescence stickers which glow in dark environment. Equipped with the Optical Viewfinder 0.5x as standard. Other optional viewfinders such as Optical Viewfinder 0.66x,and 0.8x can be used. ?Some vignetting occurs.When the VF45 and VF180 1.2x is mounted on housing, the  corners of the camera's viewfinder cannot be viewed due to vignetting.  Sync Cord 2-pin Connector enables use of conventional hardwired Sync cable (Manual mode only). Equipped with two sacrificial zinc diodes (one on the front case and the other on the rear) to prevent electrolysis damage. Equipped with under guard to protect from scrach. Compatible with Z7 / Z6 cameras by using the included parts 

The Z8 is arguably the most hotly anticipated full-frame mirrorless camera from Nikon and the first to feature the '8' series badging.  Featuring a high-resolution 45.7MP sensor that will also capture 8K/60p N-RAW video while delivering incredible autofocus and dynamic range.  The Z8's 3690k-dot OLED EVF packs a fast refresh rate for blackout free shooting thanks to the camera's electronic shutter. The Nauticam NA-Z8 is the latest release in the world's finest line of underwater camera housings and builds on the field-proven housings for other Nikon 'Z-series' cameras . Nauticam is the market leader in ergonomics, build quality, and reliability that are built on a foundation of innovative product design and modern manufacturing technology. The NA-Z8 is the ultimate accessory for the powerful Nikon Z8. THE NIKON Z8 The excitement for the Nikon Z8 rivals that of the release of the Nikon D850. Nikon shooters have been eagerly waiting for what this "mini" Z9. The D850 long ruled the Nikon roost for incredible image quality, amazing autofocus and a wide dynamic range all in a high-resolution package.  While the Z6/7 and Z9 have bracketed the spectrum of specs, the Z8 is the system that many D850 shooters have been waiting for. The Nikon Z8 features a 45.7MP stacked CMOS sensor that is delivers incredible still and moving image performance.  The Z8's electronic shutter means true zero blackout continuous shooting when using the camera's EVF and the wide range of autofocus options insure there's the right mode for every situation. For video shooters, the Z8 can capture up to 8K/60p or oversampled 4K/120p internally in their ultra-efficient 12-bit N-RAW format or a variety of ProRes formats including ProRes RAW.  The Z8 also adds pro-level video features such as a waveform monitor, focus peaking, and the ability to fine tune ISO at 1/6EV steps.  There's also a convenient 'Video Info Display' and Red Record Border. THE NAUTICAM NA-Z8 Underwater Housing The Nauticam NA-Z8 is the most intuitive and reliable underwater housing available for the Nikon Z8.  Building on the successful and field-tested designs for the NA-Z6/7 and Z9 housings the NA-Z8 embodies Nauticam's Mission Control design philosophy placing essential controls within easy reach of the reinforced molded handles. F AND Z MOUNT COMPATIBLE The NA-Z8 underwater housing for the Nikon Z8 utilizes the N120 Port System for Z-mount full-frame lenses. However, the NA-Z8 is also designed to accommodate the use of F-mount lenses, thanks to the FTZ adapter. This allows the same port configuration as found on an F-mount DSLR system like the NA-D6 or NA-D850. The NA-Z8 housing is equipped with convenient lens release buttons for both F and Z mounts, making lens changes a breeze, regardless of the lens platform. You can quickly and easily switch between different lenses without having to remove the camera from the housing, except when installing or removing the FTZ adapter. ENHANCED VIEWFINDERS Electronic viewfinders are constantly achieving higher resolution and better dynamic range and the Z8 features a 3690k-dot OLED 0.5" viewfinder.  Pair the Z8's EVF with Nauticam's Full Frame Enhanced Viewfinders for unrestricted viewing of the entire EVF in either a straight or angled configuration.  The added working distance from the back of the housing makes for a more comfortable and natural position underwater.  Edge to edge visibility and a dioptric adjustment make for easier composition and tack-sharp focus. PREMIUM PROFESSIONAL OPTICS Nauticam's lineup of optics insure the sharpest, most natural looking images underwater whether it's super-macro or wide-angle.  The WACP-1 Wide Angle Conversion Lens works flawlessly with the Nikkor Z 28-75mm f/2.8 lens to deliver an impressive 130º field-of-view at 28mm and 83º at 48mm.  A ~0" minimum focus distance and small front element makes composition and lighting even easier. Those looking for a more compact system can use the new WACP-C with the Sony SEL2870 28-70mm f3.5-5.6 OSS lens plus the Megadap ETZ 21 adapter which delivers full zoom through and a 130º to 59º field-of-view. Want greater than 1:1 magnification with unmatched sharpness?  The SMC-1 and SMC-2 provide 2.2x and 3.6x magnification respectively with the Nikkor Z MC 105mm f/2.8 VR S Macro lens and can be easily mounted with the Nauticam flips system allowing for fast deployment as well as secure and accurate placement of the optic. HDMI OUTPUT The Nikon Z8 promises clean full-resolution HDMI output using an HDMI type A connector and the NA-Z8 features an M24 bulkhead that can accommodate an HDMI 2.0 connection to a monitor/recorder such as the Atomos Ninja5+ in the NA-Ninja5 housing.  INTEGRATED VACUUM CHECK AND LEAK DETECTION SYSTEM The Nauticam vacuum check and leak detection system is shipped with NA-Z8 as standard equipment. Combined with an accessory vacuum valve (NA25624), this monitoring system provides constant updates on the water tight and safe-to-dive status of the housing. A simple color coded LED lighting system lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur.The Nauticam system is temperature compensated, eliminating false alarms caused by a change in outside temperature, or from a camera heating up on an action packed dive.

An ergonomic highly professional product entirely Made in Italy that offers the highest quality and enhanced performance underwater. Isotta's Nikon Z9 Underwater Housing The durable anodized aluminum protects the camera from water and other damaging elements and its stylish, compact and ergonomic design has been specifically created for the breakthrough models of mirrorless Nikon Z7 / Z6. The perfect handling of the Isotta signature-red color Nikon Z7/6 housing is possible by means of adjustable handles crafted to match the human hand and make holding the camera very comfortable even throughout long dives. Easy access to all key/main camera controls by means of clearly labelled laser-engraved longlasting buttons, even with gloves and drysuit gloves. An quick release camera mounting plate allows the camera positioning and a lever locks the tray inside the housing. The back door has a large window anti-scratch glass for a fine camera display and optical viewfinder view and it is entirely detached from the front body to make easier the camera fitting. External viewfinders can be mounted, INON X-2 compatible. ONE HAND OPEN/CLOSE The housing for Nikon Z7 / Z6 is closed with Isotta’s single handed one-turn knob. It’s the only single latch closing mechanism in the DSLR housing market. It’s fast, simple and secure thanks to its double steel pins at the bottom of the housing. PORTS AND EXTENSION RING A series of ports and extension rings are available in dedicated section. The removable port is fitted thanks to markers and a bayonet 120 mm connection to the Nikon Z9. The housing has been made on purpose to fit the Nikon FTZ adapter, which does let you use Nikon F-mount lenses on the Z7 – with varying degrees of compatibility. The interchangeable port bodies and extensions rings combine to allow the use of most of lenses on the market for maximum versatility and performance. CONSTRUCTION AND SAFETY Only the best materials are used to manufacture our housings such anodized aluminum which is anticorodal and thermo-coated and stainless steel. A longlasting product that requires easy and simple maintenance by the user. Dual high-quality O-Ring seals protect and ensure a perfect and secure watertight for all movable and / or removable parts; a red alarm for humidity/water inside the housing is powered by a battery replaceable by the user. Working depth is 100 metres. Different accessories can be fitted by means of one M8 hole positioned on the upper side of the housing and two threaded M6 holes located on housing bottom side. Three M16 x1 threaded holes can be used for different needs such as to accomodate a vacuum. Controls On and off lever of the Nikon Z9 Ergonomic camera focusing and shutter lever, easy to use with gloves Lens release lever Front dial Fn1 lever Fn2 lever Fn3 lever ISO button MODE button BKT button Flash button +/- button Focus mode button Quick release-mode button Zoom knob Port safety lever Movie lever (REC) AF-ON lever Rear dial R Release mode knob I (info) button Menu button AEL button DISP. button Multi-selector Playback, Viewing pictures button Zoom-in (+) button Zoom-out (-) button Qual button WB button Delete button Fn4 button Photo/video selector On/Off Display lever Highlights Ergonomic side handles, adjustable (via optional accessory) Two fiber optic connections standard (to shoot it needs an additional trigger) Three M16 holes and one M28 for installation of accessories, e.g. syncro cords, vacuum valves, monitors Back housing completely detachable from the front housing Tray with lock for the easy insertion of the camera Single-hand closing knob for the back of the housing Aluminum buttons and dials with engraved symbols identical to camera controls Wide back display viewfinder glass Double O-Ring seals on all buttons and removable parts Moisture sensor with LED indicator (replaceable battery) Removable port 120 mm bayonet Ports security latch to prevent accidental opening Wide, rubber covered feet for solid footing on boat floors or sea floor M8 hole located on upper side of the housing for various accessories such as focus lights Two M6 holes located on housing bottom side for different accessories such as brackets for strobes or tripods External viewfinders can be mounted, INON X-2 compatible

THE NIKON Z9 MIRRORLESS FULL FRAME CAMERA Nikon's Z9 takes a divergent step from similar top-level mirrorless full frame systems from Sony and Canon by removing the mechanical shutter altogether. This departure, along with the powerful processor allow for the true no-blackout or 'Real-Live" electronic viewfinder (EVF). With a maximum 3,000nit brightness, the EVF promises an even more natural viewing experience similar to an optical viewfinder. The 'F3' button comes pre-set to remove all overlay data from the EVF for an unobstructed composition-focused workspace.  The Z9 is built around a 45.7MP stacked CMOS sensor with exceptional low light performance and 14-bit raw image capture.  The ISO range of the Z9 is 64 to 25,600 with expansion possible to 32-102,400.  The EXPEED 7 processor features advanced noise reduction to maximize image quality at even higher ISO values. AUTOFOCUS Nikon's autofocus has seen dramatic improvement with the Z series and Z9 continues that evolution with AF that works all the way down to -8.5EV (with supported lenses) and features advanced 3D subject tracking. Furthermore, the subject detection system can be set to auto-select the subject type such as animals or people. With over 400 points into auto-detect area, this is sure to deliver exceptional tracking across the frame. 8K VIDEO The EXPEED 7 processor also allows for 8K UHD 30p internal recording with advanced heat dissipation to prevent overheating with an 8K/60P Raw recording firmware update coming in 2022. 10-bit 4K UHD can also be recorded with full pixel readout or with a 2.3x crop factor, exceptional for getting even more macro magnification. The future firmware update will add 12-bit 8K/60p in either Nikon's RAW format or ProRes RAW HQ.  Internal recording is available in either H.265 (8-bit), H.265 (8,10-bit) or ProRes HQ 422 (10-bit) formats to support different workflows.  The Z9 is equipped with dual CFexpress Type-B card slots that also accommodate XQD media. THE NAUTICAM NA-Z9 UNDERWATER HOUSING The Nauticam NA-Z9 brings embodies the experience gained by producing professional housings for Nikon's flagship DSLR and mirrorless cameras, blending them to create the most intuitive underwater imaging platform available. F AND Z MOUNT COMPATIBLE The NA-Z9 uses the N120 Port System for Z-Mount full-frame lenses. When using F-mount lenses, the FTZ adapter is inside the housing which allows for the same port configuration as is found on an F-mount DSLR system such as the NA-D6 or NA-D850. Convenient lens release buttons on the housing for both F and Z mount makes lens changes a snap regardless of platform without having to remove the camera from the housing; only when installing or removing the FTZ adapter. MISSION CONTROL Essential control are placed within easy reach of the ergonomic handles and easy setup means more time in the water and less time working on your rig. Within easy reach of the ergonomic left handle are finger-actuated levers for the customizable 'Fn1' and 'Fn2' buttons as well as the AF-Mode button. A double thumb lever triggers the PLAYBACK and DISP buttons. On the right side is a double thumb lever for the AF-ON and REC control as well as recessed lever for ISO and a forward placed lever for the 'Fn1' button. HDMI OUTPUT As a true hybrid shooting platform the NA-Z9 is just as comfortable being outfitted to capture video as stills. External monitors and recorders can easily be connected via the large M24 bulkhead which supports both HDMI 1.4 and HDMI 2.0 connections. PREMIUM PROFESSIONAL OPTICS The NA-Z9 is built around the extensive N120 Port System that supports a wide range of F-Mount and Z-Mount lenses with a variety of acrylic and optical-glass port options. In addition to standard ports, Nauticam's premium professional water-contact optics deliver the highest possible underwater image quality. The WACP-2, when used with the Nikon Z 14-24mm lenses provides a stunning rectilinear 140º field-of-view and full zoom-through capability with an incredibly natural looking image when compared to a standard rectilinear lens and dome port combination. HDMI Output Required for HDMI 2.0 System NA25086 M24 adaptor for HDMI 2.0 cable (incl. tightening tool) NA25099 M24A2R200-M28A1R170 HDMI 2.0 Cable (for NA-a1 to use with Ninja V housing) Required for HDMI 1.4 System NA25033 Standard HDMI bulkhead with M16 thread* NA25081 M24-M16 Step Down Adaptor NA25100 HDMI (D-A) 1.4 Cable in 200mm length for NA-a1 (for connection from HDMI bulkhead to camera) Compatible Monitor Mounting System NA17951 Nauticam Atomos Shogun housing mounting system NA17954 Tripod plate for NA-A7S and NA-GH4 NA17957 Nauticam Atomos Shogun Housing Mounting Adaptor for NA-S1R/S1H/BMPCC/E2F/R3/Z9(SN from A439736) NA17960 Universal Quadra-Pod Plate for Nauticam Housings