Sony RX100 VI and VII Underwater Housing by Fantasea

The NA-RX100VI sets a new standard for compact camera body design. It is the ultimate refinement of the models that came before it and have stood the test of time. The NA-RX100VI housing is moving to an interchangeable N50 port system, meaning that in addition to connecting a range of different accessory lenses, a variety of customised ports are also available. A compact camera underwater is only as good as the optics in front of it, and the growing Nauticam accessory lens range sets new performance benchmarks with each release. NA-RX100VI Video Demo from Nauticam on Vimeo. All Nauticam accessory lenses are designed specifically for underwater shooting - not waterproof adaptations of lenses that were actually designed for aerial use - resulting in superior image quality. Nauticam's macro accessories deliver visibly sharper images than competing macro lenses, especially in the corners, with significantly less purple fringing. The lens design is also designed with autofocus systems in mind, easing the learning curve when imaging at high magnification. Port options The NA-RX100VI features an interchangeable port system not found on previous versions. This new port system allows for several different configurations to suit any shooting situation, from super wide angle to super macro! Standard connection (included): The NA-RX100VI comes with the standard port that allows full zoom through the camera's lens. Standard port with M67 swivel mount for attachment lenses (OPTIONAL) and SMC-1 (OPTIONAL): The optional M67 standard port swivel mount (NA25107) can be connected to the standard port supplied.  Equipped with the optional SMC-1 super macro converter, this enables super macro magnification (at focal lengths greater than 65mm).  With this mount, the SMC-1 can be safely transported in the water when not in use. N50 short port with bayonet connector (OPTIONAL) for WWL-1 (OPTIONAL): The N50 short port with bayonet mount (NA38703) is designed to enable the use of the NA-RX100VI with the WWL-1 Wet Wide Lens (NA83201). Optimised for a 28mm equivalent focal length, the lens offers a 130° diagonal angle of view with low distortion, extremely high overall sharpness (especially in the corners), excellent contrast and shock resistance (vignetting may occur at focal lengths below 28mm).  The short port is limited to a maximum focal length (zoom) of 70mm.    N50 short port with bayonet connector (OPTIONAL) with CMC-1 (OPTIONAL): The N50 short port with bayonet mount (AN38703) is designed to allow the NA-RX100VI to be used with the Compact Macro Converter CMC-1 (NA81301). The CMC-1 enables true macro photography in the focal length range of 36-70mm. The CMC-1 and WWL-1 can be interchanged underwater with this bayonet mount system, making the NA-RX100VI the ideal platform for true wide-angle and macro photography in the same dive!  The short port is limited to a maximum focal length (zoom) of 70mm. 

THE SONY CYBERSHOT DSC RX100 VII CAMERA The continuation of the longer 24-200mm equivalent zoom lens with the RX100 VII (same as the RX100VI) sets this camera apart from the very popular RX100 V. It hosts a redesigned 20.1MP 1" Exmor RS CMOS sensor, along with an improved BIONZ X image processor, and highly-accurate 357-point hybrid autofocus system. With 5-axis image stabilization and the 20fps blackout free silent shooting (with autofocus), the RX100 VII is going to track your subjects more accurately in photo and video modes. The RX100 VII captures UHD 4K 30/24fps video that downsamples from the entire sensor width giving extremely sharp details. For slow-motion capture, there is 120fps Full HD, as well as a dedicated HFR mode that allows the camera to record frame rates up to 960fps. Also offering "Steady Shot Active Mode", the RX100VII combines in camera and lens stabilization to give a smooth look to your videos even when making big movements, and with the addition of a microphone jack, video shooters will certainly want to give this camera a second look. Key Camera Specifications 20.1MP 1"Exmor RS BSI CMOS sensor BIONZ X Image Processor & Front-End LSI ZEISS Vario-Sonnar T* f/2.8-4.5 Lens 24-200mm (35mm Equivalent) Up to 20-fps Blackout-Free Shooting UHD 4K video at 30/24p with HLG & S-Log3 Gammas 0.39" 2.36m-Dot OLED Pop-Up EVF 3.0" 921.6k-Dot 180° Tilting Touchscreen Fast Hybrid AF, 357 Phase-Detect Points Real-Time Tracking and Eye-AF   THE NA-RX100VII UNDERWATER HOUSING Nauticam has supported every version of the Sony RX100 lineup and with the RX100 VII the housing continues with the N50 interchangeable port system. The NA-RX100VII features the same innovative and user-friendly rotary-latch locking system and two-stage trigger from previous versions as well as the clearly-labeled and intuitive buttons and dials. Example setup MISSION CONTROL The NA-RX100VII follows Nauticam's design philosophy of placing the camera controls where they are most needed and easily accessible. The record button is colored red and within easy reach of the right side of the housing, even when using an optional tray system. The pop-up flash can be activated or stowed with the camera inside the housing, eliminating the need to preset the flash before inserting the camera and allowing quick changes between artificial and ambient lighting scenarios. The shutter speed and aperture controls feature easy-to-use control wheels, with the front dial sporting large grooves to facilitate fingertip control without having to reach forward. INTERCHANGEABLE N50 PORT To maximize the added flexibility of the longer zoom lens on the RX100 VII, the NA-RX100VII features an interchangeable N50 port. The Standard Port that is included with the housing allows for the use of the full zoom range and is compatible with the 25107 M67 Flip Diopter Holder. At 90mm equivalent and above, the RX100VII can be used with the SMC-1 wet-optic to achieve true super-macro capability. PREMIUM PROFESIONAL OPTICS For super wide-angle, the standard port can be changed for 38702 N50 Short Port with Bayonet Mount. This port is ready to support the WWL-1 Wet-Wide Lens with the intuitive and convenient bayonet-mounting system. Zoom range is still accessible but is limited to 65mm equivalent. The WWL-1 can be changed underwater with the CMC-1 or CMC-2 to give macro capabilities on the same dive. OPTIONAL PRO PACKAGE CONFIGURATION The NA-RX100VII is also available in the Pro Package configuration that comes with the Flexitray II, Right Handle, two ball-mounts and M14 vacuum valve pre-installed. The standard NA-RX100VII ships with stainless steel stiffening brackets and shutter release extension should a Nauticam Easitray or Flexitray be added later. HDMI OUTPUT The RX100VII has HDMI output for video, allowing for the use of external monitors which make judging exposure, focus and composition easier than using the built-in LCD of the camera. By adding the optional 25028 Socket Extension and 25032 Custom HDMI bulkhead, the NA-RX100VII is compatible with external monitor housings such as the NA-502B-H or NA-Ninja V (HDMI 1.4 connection only). INTEGRATED VACUUM CHECK AND LEAK DETECTION SYSTEM The Nauticam vacuum check and leak detection system is shipped with NA-RX100VII as standard equipment. Combined with an accessory M14 Vacuum Valve II (PN 25624), this monitoring system provides constant updates on the water tight and safe-to-dive status of the housing. A simple color coded LED lighting system lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur. The Nauticam system is temperature compensated, eliminating false alarms caused by a change in outside temperature, or from a camera heating up on an action packed dive. Recommended Accessories HDMI Connectivity Accessories NA25028 Socket extension for 25032 HDMI bulkhead with M16 thread NA25032 Custom HDMI bulkhead to use with socket extension NA25046 HDMI (D-D) cable in 200mm length (for connection from HDMI Bulkhead to camera)    

The housing for Sony Cyber-shot RX100 Mark VI / RX100 Mark VII allows to capitalize on the camera full potential and to capture amazing pictures underwater. Product details An easy to use, highly professional product has been created through techniques and innovations gained from years of experience. The housing for  Sony Cyber-shot RX100 Mark VI / RX100 Mark VII perfect handling by means of an adjustable strips. Easy access to all key/main camera controls by means of clearly labelled laser-engraved longlasting buttons. An easy and quick release camera mounting plate allows the camera positioning; the back door has a large window for a fine camera display view and it is entirely detached from the front body to make easier the camera fitting. ONE HAND OPEN/CLOSE It's very easy to open and close Sony Cyber-shot RX100 Mark VI / RX100 Mark VII, without any efforts by the user thanks to the side helicoid screw and the bottom centered pins; the camera is placed easily into the housing on a sliding tray that keeps the camera robustly in place. A lever locks the tray safely inside the housing. The housing stands with great stability due to sturdy and wide rubber feet located on the bottom. PORT, CLOSE-UP AND WIDE-ANGLE LENSES The housing is equipped with a square port which allows the user to make use of the full range of the built-in camera zoom. The port is made of high quality materials to ensure a perfect image quality. This flat port is mounted via a secure bayonet mount to the housing. There is also an alternative port with an M67 thread that allows the usage of macro diopters (AS739). Alternatively, the standard compact port with M67 thread can be used, enabling the use of other M67 accessories but limits the range of the camera zoom (AS761) LIGHTING Sony Cyber-shot RX100 Mark VI / RX100 Mark VII own strobe lighting can be used fitting an outside diffuser on the porthole. For better performance with wide angle lenses, one or two external strobes can be connected by optical fiber using the adaptor included. CONSTRUCTION AND SAFETY Only the best materials are used to manufacture our housings such anodized aluminum which is anticorodal and thermo-coated and stainless steel. A longlasting product that requires easy and simple maintenance by the user. So small and so rich in technology! Dual high precision and quality O-Ring seals protect and ensure a perfect and secure watertight for all movable and / or removable parts; a red alarm for humidity/water inside the housing is powered by a battery replaceable by the user. Working depth is 100 metres. An hole positioned on the bottom allows to secure the housing for Sony Cyber-shot RX100 Mark VI / RX100 Mark VII with a line/strap. Different accessories can be fitted by means of an upper sliding tray and double threaded M6 holes and one 1/4W on the Bottom. Controls ON/OFF of Sony Cyber-shot RX100 Mark VI / RX100 Mark VII Own camera strobe open/close Ergonomic camera focusing and shutter button for an easy use with gloves Shutter speed priority Lens aperture Exposure

The housing for Sony Cyber-shot RX100 Mark VI / RX100 Mark VII allows to capitalize on the camera full potential and to capture amazing pictures underwater. Product details An easy to use, highly professional product has been created through techniques and innovations gained from years of experience. The housing for  Sony Cyber-shot RX100 Mark VI / RX100 Mark VII perfect handling by means of an adjustable strips. Easy access to all key/main camera controls by means of clearly labelled laser-engraved longlasting buttons. An easy and quick release camera mounting plate allows the camera positioning; the back door has a large window for a fine camera display view and it is entirely detached from the front body to make easier the camera fitting. ONE HAND OPEN/CLOSE It's very easy to open and close Sony Cyber-shot RX100 Mark VI / RX100 Mark VII, without any efforts by the user thanks to the side helicoid screw and the bottom centered pins; the camera is placed easily into the housing on a sliding tray that keeps the camera robustly in place. A lever locks the tray safely inside the housing. The housing stands with great stability due to sturdy and wide rubber feet located on the bottom. PORT, CLOSE-UP AND WIDE-ANGLE LENSES The housing is equipped with a square port which allows the user to make use of the full range of the built-in camera zoom. The port is made of high quality materials to ensure a perfect image quality. This flat port is mounted via a secure bayonet mount to the housing. There is also an alternative port with an M67 thread that allows the usage of macro diopters (AS739). Alternatively, the standard compact port with M67 thread can be used, enabling the use of other M67 accessories but limits the range of the camera zoom (AS761) LIGHTING Sony Cyber-shot RX100 Mark VI / RX100 Mark VII own strobe lighting can be used fitting an outside diffuser on the porthole. For better performance with wide angle lenses, one or two external strobes can be connected by optical fiber using the adaptor included. CONSTRUCTION AND SAFETY Only the best materials are used to manufacture our housings such anodized aluminum which is anticorodal and thermo-coated and stainless steel. A longlasting product that requires easy and simple maintenance by the user. So small and so rich in technology! Dual high precision and quality O-Ring seals protect and ensure a perfect and secure watertight for all movable and / or removable parts; a red alarm for humidity/water inside the housing is powered by a battery replaceable by the user. Working depth is 100 metres. An hole positioned on the bottom allows to secure the housing for Sony Cyber-shot RX100 Mark VI / RX100 Mark VII with a line/strap. Different accessories can be fitted by means of an upper sliding tray and double threaded M6 holes and one 1/4W on the bottom. Controls ON/OFF of Sony Cyber-shot RX100 Mark VI / RX100 Mark VII Own camera strobe open/close Ergonomic camera focusing and shutter button for an easy use with gloves Shutter speed priority Lens aperture Exposure