Canon EOS 5DS/5DS R/5DMKIII Underwater Housing by Nauticam

This item is discontinued. Please find accessories and technical data here.

Product number: NA17320
HAN: NA-5DSR

Of course, a camera of this size deserves the best housing to take it underwater. Existing NA-5DMKIII housing owners - stop reading here, because this housing will work just fine with the 5DS. But Nauticam can't rest on laurels, so they simply had to produce the NA-5DSR and refine the NA-5DMKIII housing even more. The Nauticam NA-5DMKIII is incredibly popular and well-liked by their users. Many of the controls for the NA-5DSR are based on the NA-MKIII and take advantage of how stable this housing is. However, the Nauticam designers were able to make improvements. Small ¨changes, of course, but each incredibly well thought out - designed by underwater photographers, for underwater photographers.

As an example of a small but important ¨change, the right side of the housing has been made less "ücluttered" by moving the video/still switch to the top of the housing and combining the ISO and DOF preview buttons into a tactile rocker that makes accessing both controls especially easy. Perhaps the biggest change is the addition of the patent-pending Multi-Controller. This brings the joystick controls closer to the right hand for easier access. The piano keys für Set and Q have been beautifully designed to make room for them, creating a user interface that is both beautiful and functional.

Simple buttons such as Menü, Picture Style, Rate, Zoom Out, and Trash have been adjusted so that you can reach these buttons more easily with your left hand. The shutter is in the new paddle style - exceptionally easy to use, even with thick gloves, while maintaining amazing tactile feel for using the half-pressure of the 5DS shutter. The NA-5DSR includes strobe mounting balls and lightweight laser-cut stabilitäts mounts. 

System Specifications:

  • Flash output dual Nikonos connectors pre-installed
  • .
  • Spare O-ring 90134
  • Vacuum system electronics pre-installed

Use with Canon 5DMKIII

Because the 5DS, 5DS R, and 5D Mark III share the same basic body housing, this housing can be used with all three cameras. This provides incredible flexibility.... Shoot for high resolutions with the 5DS R on a dive, then switch to the 5D Mark III for its excellent low-light capabilities.

Finally, the NA-5DS is slightly lighter than the original NA-5DMKIII.... so much so that the additional lift required for most applications is reduced or eliminated. The result is a housing that is a dream for underwater use.

.

View finder

The standard optical glass viewfinder is very good and travel-friendly, but many photographers prefer the convenience of a magnified viewfinder with adjustable diopters. Nauticam produces a "straight" 180º magnifying viewfinder and a 45º angled magnifying viewfinder to facilitate the tight-space work often associated with macro shooting. Both viewfinders feature high-quality optics and allow bright viewing of the entire image. A patented external diopter adjustment allows for personalized, pin-sharp adjustment underwater. Viewfinder changes can be performed in less than 30 seconds without tools. Exceptional composition and focus accuracy have never been so accessible.

.

High-quality professional optics

.

Experienced photographers know that a camera is only as good as the lens in front of it, and the same goes for the choice of optics for an underwater camera system. Four optically coated glass dome ports (diameters 250mm, 230mm, 180mm and 140mm) and a range of acrylic ports support common lenses from Canon, Sigma and Tokina.  Port configurations are extensively tested at Nauticam to determine the ideal extension ring length for best performance.

.

For macro and super macro photography, the Nauticam Super Macro Converter is a revolutionary accessory. It is a completely proprietary design optimized for use in water.

Water contact correction provides the highest overall sharpness, free of chromatic aberration and violet fringing, with imaging ratios of more than 2:1 when used with an EF 100mm f/2.8L IS USM macro lens.

.
Arm Attachment: 1-inch ballhead
Body Material: aluminum
Camera System: DSLR
Camera manufacturer: CANON
Strobe connector: electrical N5
Tripod connection: Thread 3/8
portsystem: N120
Weiterlesen
Technical data

  • Gehäusematerial: aluminum

  • Nominal depth: 100 m

  • Weight: approx. 2.84 kg

  • Dimensions: 358 mm (W) x 187 mm (H) x 135 mm (D) 

  • Port connector: N120


Scope of delivery

  • Canon EOS 5DS/5DS R/5DMKIII underwater housing by Nauticam.
  • Canon hot shoe connector to two Nikonos connectors (outlet and ground connectors only)

  • Silicone rubber replacement O-ring for housing.
  • O-ring remover

  • O-ring grease

  • CR-2032 battery

  • Allenkey set

  • Instruction manual


Only the components of the item that are listed here will be delivered. Accessories and/or decoration shown in our images are for demonstration purposes only. In particular, we would like to point out that the purchase of an underwater housing often does not include a port or an external viewfinder. These can be purchased as accessory items. If you have any questions about the configuration of your system, do not hesitate to contact us.


0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.
on stock
TTL Converter for Canon in Naurticam and Hugyfot housings
Optoelectronic flash trigger for Canon cameras in Nauticam and Hugyfot housings. The world's first TTL converter that is compatible with all Canon DSLR and DSLM cameras, regardless of model or TTL protocol version. Compatible underwater flashes: Inon Z330, Z240; Ikelite DS-161, DS-160; Sea&Sea YS-D1, YS-D2 (made-in-China), YS-250, RetraFlash PRO and Prime (including HSS support). The product supports 4 pcs TTL outputs: 2 pcs optical bulkheads + 2 pcs electrical bulkheads can be connected. TTL converter has automatic on/off, incredible battery life 5 years. Easy installation by the user. TTL and HSS on RetraFlash Fantastic TTL accuracy allows photographers to relax and rely completely on automatic flash exposure control. Many creative tasks are made possible by using extremely fast HSS shutter speeds of up to 1/8000 with the Retra Pro flash in manual mode. The TTL converter firmware also has some other important updates related to its common functionality. The Retra PRO profile can be set by the user üvia the TTL converter's built-in rotary switch. The TTL/M modes can be switched underwater simply by using the camera name or the flash button. In manual mode, the flash intensity can be adjusted manually üvia the camera wheel/scale, but also üvia the flash control knob. (+/-) TTL flash compensation is supported by the firmware, the full range is available via the camera control in the range -3ev......+3ev. The firmware supports sync settings for the 1-st /2-nd curtain and the rear curtain. Continuous (serial) recording is supported. The HSS firmware of the TTL converter supports the HSS functionality of the Retra Pro flash. The built-in rotary switch must be set to the Retra Pro profile (position - "7"). Available HSS shutter speeds for Sony A7-A9: 1/320 ....1/8000 sec. The Retra flash allows the HSS flash intensity to be set using the rotary knob. In the updated firmware, switching to HSS shutter speeds is also included in the general functionality of the TTL converter (also for all other positions of the rotary switch), - usable for shooting with ambient light at high shutter speeds if required. However, the X-Sync speed limit (1/250 for Sony A7-A9) is still automatically supported for TTL modes, as required for mono flash TTL underwater flash. Incredibly long battery life in the TTL converter: 1-3 years of continuous operation. The product has extremely low power consumption. The converter features an automatic on/off switching module that saves battery power. No mechanical switch is required to switch UW Technics TTL converters on and off. The TTL converter firmware includes TTL profiles for the following underwater flashes: Retra Pro, Inon Z-330/ Z-240/S-2000, Sea&Sea YS-D2/ YS-D1/ YS-250, Ikelite DS-161/ DS-160 and Subtronic Pro-270/Pro-160. Each profile can be easily set by the user üvia an onboard switch.

€499.00*

Similar products

Canon EOS 5D Mark III Underwater Housing by Isotta
Techniques and innovations based on years of experience have resulted in an easy-to-use, highly professional product. Perfect handling of the Canon EOS 5D Mark III body is made possible by adjustable grips that fit the human hand and make holding the camera very comfortable, even on long dives. Easy access to all key camera controls with clearly labelled, laser engraved, durable buttons, even when wearing gloves and dry diving gloves. An easy and quick release camera mounting plate allows camera positioning and a lever locks the compartment inside the housing. The back door has a large scratch-resistant window glass for a fine camera display and optical viewfinder, and is completely separated from the front body to facilitate camera mounting. External viewfinders can be mounted, INON X-2 compatible.  Open and close with one hand The Canon EOS 5D Mark III housing is locked with Isotta's one-handed, single-turn knob. It is the only single locking mechanism on the DSLR housing market. It is quick, easy and secure thanks to its double steel bolts on the underside of the housing. Ports and extensions A range of ports and extension rings are available in a dedicated section. The detachable port mounts to the Canon EOS 5D Mark III thanks to markers and a 120mm bayonet mount. The interchangeable port bodies and extension rings allow the use of most lenses on the market for maximum versatility and performance. Light The housing of the Canon EOS 5D Mark III offers the possibility to use external flashes via two standard light connectors as well as two Nikonos sync cable sockets. This allows for easy mounting of all flash and lighting equipment. Construction and safety Only the best materials are used in the manufacture of our enclosures, such as anodised aluminium, which is corrosion-resistant and thermally coated, and stainless steel. A durable product that requires easy and quick maintenance by the user. Two high quality O-ring seals protect and ensure perfect and safe waterproofing for all moving and removable parts; a red moisture/water alarm inside the housing is powered by a user replaceable battery. Working depth 100 metres. Various accessories can be attached using the M8 hole on the top of the housing and the double M6 threaded holes on the bottom of the housing. Special features: Ergonomic side handles, adjustable (via optional accessories); Two fibre optic connectors (optional); Two standard sync cable sockets; Rear housing is fully detachable from the front housing; Locking compartment for easy camera mounting; One-hand lock for rear housing; One M16 connector for installation of accessories, e.g. vacuum valves or monitors; Aluminium buttons and dials with engraved symbols identical to the camera controls; all camera controls are external; Viewfinder glass with wide back; Optical viewfinder;  double O-ring seals on all buttons and removable parts;  Humidity sensor with LED and audible indicator (replaceable battery); Removable port - 120mm bayonet; Safety lock on ports to prevent accidental opening;  Wide, rubberised feet for firm footing;  M8 hole on top of housing for various accessories such as focus lamps; Two M6 holes on the bottom of the housing for various accessories such as mounts for flash units or tripods;  External viewfinders can be mounted, INON X-2 compatible; 

€3,490.00*