Sony A7R III and A7III Underwater Housing by Nauticam

This item is discontinued. Please find accessories and technical data here.

Product number: NA17420
HAN: NA-A7RIII

Sony, pioneers of the full-frame mirrorless camera with their A7 line have brought us their latest iteration and it is awesome. Taking cues from the just-released A9 the A7RIII adds better autofocus, faster continuous shooting, and the still-awesome 5-axis stabilization rated at an amazing 5.5 stops. 4K is recorded from downsampled 5K using the full sensor width or the Super 35 crop mode is also available for a little in-camera zoom.

THE SONY ALPHA A7R III

The Sony a7R III is the company's latest high-resolution full frame mirrorless camera. Much like Nikon's recent D850, it's one that combines resolution with high speed and fast autofocus capabilities to a degree we've not previously seen.

The Sony a7R III achieved an overall DxOMark sensor score of 100 points, the same as the Nikon D850. This makes it the highest-scoring mirrorless system camera to date, beating the A7R II by two points.

The a7R III is built around it's 42MP BSI CMOS sensor and can shoot up to ten frames per second. 4K footage can be captured either from the full width of the sensor or from a Super 35 size crop. The camera can also shoot 1080p video at up to 120p and has a function to conform this footage back down to 24 or 30p, if you want out-of-camera slow-mo. These functions are also available from both the full width of the sensor or from the cropped region. 5-axis image stabilization ('Steadyshot') is available in all modes.

The a7R III inherits many of the lessons learned from the company's pro-sports model, the a9. This means faster processing, improved autofocus, improved handling and ergonomics, as well as the adoption of a much larger battery!

Sony Alpha a7RIII Key Camera Specifications

  • 42MP BSI CMOS sensor
  • Faster, lower-noise image processing
  • 10 fps shooting with full AF, 8 fps with 'live' updates between shots
  • 3.69M dot (1280 x 960 pixel) OLED viewfinder
  • Improved autofocus, including more tenacious Eye AF mode
  • 5-axis image stabilization, rated at 5.5 stops (CIPA) with 50mm lens
  • 4K footage from 'Super 35' crop region oversampled from 5K capture
  • Video AF less inclined to refocus to background
  • 'Picture Profile' video gamma/gamut modes including S-Log2 and 3
  • Twin SD Card slots (one UHS-I and one UHS-II compatible)
  • Bayer-cancelling multi-shot mode for improved resolution
  • True 14 bit uncompressed Raw, even in continuous drive mode
  • Use of phase detection (including Eye AF) at 3 fps with adapted lenses

THE SONY ALPHA A7 III CAMERA

A full frame mirrorless 24.2 MP sensor that offers 14 bit RAW imaging at 10 fps. The sensor itself is 5-axis stabilized and features 693 phase-detection AF points covering 93% of the image area in addition to 425 contrast-detection points. The A7 III is able to capture UHD 4K at 30p and 100 Mbit/s and includes Hybrid Log Gamma as well as Sony S-Log.

Sony Alpha A7III Key Camera Specifications:

  • 24.2MP Full Frame CMOS Sensor
  • Full-frame or Super 35 readout 4K UHD recording at up to 30p
  • S-Log 2/3 and Hybrid Log Gamma recording
  • In-body 5-axis image stabilization with 5-stop compensation

B46I0125

NAUTICAM NA-A7RIII UNDERWATER HOUSING

A professional housing befitting of a top-of-the-line camera, the NA-A7RIII underwater housing provides fingertip access to all key camera controls in a rugged and reliable aluminum underwater housing. Ergonomic camera control access is one of the defining strengths of a Nauticam housing, and the NA-7RIII continues this tradition. Essential camera parameter changes are made from the handles, without awkward reaches.

The NA-A7RIII housing inherits the core design elements from the Nauticam pro DSLR range, and bundles them in a more compact package. A patented port locking lever allows lens changes to be made in seconds. Opening the housing for quick battery and media changes is fast and easy with the locking housing latches. All aspects of the system are a seamless extension of the camera.

The NA-A7RIII is equipped with two M16 and one M14 bulkhead. This allows for the addition of a variety of bulkhead accessories such as a Vacuum Valve, electronic flash triggering bulkhead, and even HDMI Bulkheads for video.

With "clean" 4K 4:2:2 HDMI output, pairing the NA-A7RIII with an external recorder from Atomos will enhance the incredible video capabilities of this camera even more. 4K is created from oversampled 5K when recording in-camera to UHS-II cards giving extremely high quality internal recording as well.

Vacuum Check and Leak Detection System

The Nauticam vacuum check and leak detection system is shipped with NA-A7RIII as standard equipment. With the addition of the optional M14 Vacuum Valve (NA25624) this monitoring system provides constant updates on the water tight and safe-to-dive status of the housing. A simple color coded LED lighting system lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur. The Nauticam system is temperature compensated, eliminating false alarms caused by a change in outside temperature, or from a camera heating up on an action packed dive.

Arm Attachment: 1-inch ballhead
Body Material: aluminum
Camera System: Mirrorless (MIL)
Camera manufacturer: Sony
Strobe connector: optical Sea&Sea
Tripod connection: Thread ¼
portsystem: N100
Weiterlesen
Technical data

  • Depth Rating: 100m

  • Weight: 2.43 kg

  • Dimensions: 348mm x 200mm x 118mm

Scope of delivery

  • Sony A7R III and A7III Underwater Housing by Nauticam

  • Spare Main O-ring, o-ring remover and lubricant

  • CR-2032 Battery (for Moisture Alarm)

  • Set of Allen Keys

  • Instruction Manual

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.
Monitor Housing Mounting Adaptor
This kit replaces the standard handle top-mounting plates to allow for the mounting of the Nauticam Monitor Housings on the Fitting camera housings.

€190.00*
on stock
180° viewfinder for Nauticam SLR housings
The Nauticam's 180° enhanced straight viewfinder is the perfect complement to your SLR body, providing a bright, clear and undistorted 1:1 image of the camera's viewfinder and is essential for precise focusing and artistic creation. The straight 180º viewfinder also provides more space for your regulator and allows for a more comfortable viewing position. Diopter adjustment The viewfinder has an external knob to compensate for vision; diopter adjustment can be done easily even when you are underwater, no need to disassemble the viewfinder. Robust construction The housing is made of anodised aluminium and all lens elements and prisms in the viewfinder are precision ground and multi-layer coated to ensure optimum light transmission and no distortion. Mounting the viewfinder With Nauticam housings, it is easy to switch between the standard 0.66x and the extended 180° viewfinder, in most cases without tools or adapters.

€1,440.00*
on stock
M14 Vacuum Valve II
Installing vacuum valve to housing Remove the plug of the M14 accessory port from the housing. Remove the cap from the vacuum valve. Tighten the vacuum valve to the housing with the tool provided. Building up vacuum Remove the cap of the vacuum valve. Connect the hand pump to the valve and pump several times until it reaches the target vacuum level. The LED light will turn flashing yellow while vacuum is building up, then steady green when the target vacuum level is reached. Attention: After the target vacuum is reached, i.e. steady green light, attach the cap back to the vacuum valve. It is recommended to leave the housing for at least 20mins to ensure it is sealed. If the LED light changes from steady green light to rapidly flashing yellow light, that means there is a leakage and please check every O-ring and conduct the vacuum test again. Please ensure that the cap is attached back to the vacuum valve before going underwater. Vacuum can be released by pushing the red release button. Attention: Please DO NOT attempt to go over the designated vacuum level, i.e. stop pumping when the LED turn green. Excessive vacuum level may lead to the malfunction of the camera and lens. Note: Although the vacuum indicator is designated to compensate for a certain amount of temperature variation, it is recommended to conduct the vacuum test in an environment where the temperature is stable. After set up, the meaning of the LED indicator in the housing: Flashing “Blue” light: Standby mode. The moisture alarm is active, and the system is ready for vacuum indication whenever a vacuum is detected. Flashing “Red” light with beeping sound:Moisture is detected. Flashing “Yellow” light: Some vacuum is detected, target vacuum level is not reached. Steady “Green” light: Target vacuum level is reached. Rapidly flashing “Yellow” light: Vacuum is dropping. (Will occur only after target vacuum level is reached) Rapidly flashing “Red” light: Vacuum is totally lost. Circuit stalled until switched off. (Will occur only after target vacuum level is reached)

€205.00*
Nikonos Adaptor for Sony Fullframe
Ready to reuse those Nikonos lenses with your new Sony mirrorless? This adapter allows the use of supported Nikonos lenses on the NA-A7II/A9 housing. NA-A7II NA-A9 NA-A7RIII NA-A7RIV/A9II NA-A1 NA-a2020 NA-FX3 NA-A7C

€545.00*
on stock
Mounting Ball Set for Tripod
This kit allows for the secure mounting of industry standard 1" ball mounts directly onto the NA-A9 housing that provides a low-profile attachment point for tripod legs or accessory light arms. Compatible with Nauticam Housings: NA-A9 NA-A7RIII NA-BMPCC NA-XT3 NA-RIV NA-Z50 NA-XT5

€77.00*
on stock
Mini Flash Trigger for Sony
Nauticam flash trigger units allow the use of robust and reliable fiber optic cables to fire external strobes, providing dependable, rapid-fire flash triggering over fiber. Flash triggers allow motor drive shooting sequences, perfect for fast moving action. This flash trigger plugs into the A7 camera hotshoe and provides an optical signal for fast, continuous strobe firing. Automatic TTL flash control is not supported by this flash trigger, flash power is set manually on the strobe itself.

€285.00*
45° viewfinder for Nauticam SLR housing
Nauticam's improved 45°angle viewfinder is the perfect complement to your housing, providing a bright, clear and undistorted 1:1 image of the camera's viewfinder, as well as a 45°viewing angle. The viewfinder can be rotated to any angle, which is important when shooting in a vertical orientation. The 45º viewfinder also provides more clearance for your regulator, allowing for a more comfortable viewing position. Introducing the NAUTICAM 45° VIEWFINDER . Long- or short-sightedness? The viewfinder features an external knob for vision compensation; easy diopter adjustment can now be made underwater without disassembling the viewfinder . Proven design The body is made of anodised aluminium and all lens elements and prisms in the viewfinder are precision ground and multi-layer coated to ensure optimum light transmission and no distortion . INSTALLING THE SEARCHER . With Nauticam housings, it is easy to switch between the standard 0.66x and Enhanced 45° viewfinder, in most cases without tools or adapters. With optional adapter kits, it can also be adapted to the housings of Ikelite, Aquatica, Sea & Sea and Nexus. Note: Because some newer camera models have higher magnifications and a decreasing eye point, there may be a slight reduction in view from edge to edge when using a Nauticam magnification viewfinder. The extent varies, but the benefits of the magnification viewfinder remain.

€1,210.00*
TTL-Converter for Sony A1/A7/A9-series in Nauticam housings
Optoelectronic TTL converter (for SONY) for NAUTICAM underwater housings NA- NA-A7 II, A7R III, A7RIV, A9, A9 II. Compatible underwater flashes: Inon Z-330 / Z-240 / S-220, Sea&Sea YS-D1 / YS-D3 Mark II / YS-250, Ikelite DS-230 / DS160 / DS160 DS-125, Subtronic Pro-270 / Pro-160, RetraFlash PRO TTL and HSS on the RetraFlash Fantastic TTL accuracy allows photographers to relax and rely entirely on automatic flash exposure control. Many creative tasks are made possible by using extremely fast HSS shutter speeds of up to 1/8000 with the Retra Pro flash in manual mode. The TTL converter firmware also has some other important updates related to its common functionality. The Retra PRO profile can be set by the user üvia the TTL converter's built-in rotary switch. The TTL/M modes can be switched underwater simply by using the camera name or the flash button. In manual mode, the flash intensity can be adjusted manually üvia the camera wheel/scale, but also üvia the flash control knob. (+/-) TTL flash compensation is supported by the firmware, the full range is available via the camera control in the range -3ev......+3ev. The firmware supports sync settings for the 1-st /2-nd curtain and the rear curtain. Continuous (serial) recording is supported. The HSS firmware of the TTL converter supports the HSS functionality of the Retra Pro flash. The built-in rotary switch must be set to the Retra Pro profile (position - "7"). Available HSS shutter speeds for Sony A7-A9: 1/320 ....1/8000 sec. The Retra flash allows the HSS flash intensity to be adjusted with the rotary knob. In the updated firmware, switching to HSS shutter speeds is also included in the general functionality of the TTL converter (also for all other positions of the rotary switch), - usable for shooting with ambient light at high shutter speeds if required. However, the X-Sync speed limit (1/250 for Sony A7-A9) is still automatically supported for TTL modes, as required for mono flash TTL underwater flash. Incredibly long battery life in the TTL converter: 1-3 years of continuous operation. The product has extremely low power consumption. The converter features an automatic on/off switching module that saves battery power. No mechanical switch is required to switch UW Technics TTL converters on and off. The TTL converter firmware includes TTL profiles for the following underwater flashes: Retra Pro, Inon Z-330/ Z-240/S-2000, Sea&Sea YS-D2/ YS-D1/ YS-250, Ikelite DS-161/ DS-160 and Subtronic Pro-270/Pro-160. Each profile can be easily set by the user üvia an onboard switch. Full compatibility with all SONY mirrorless cameras, regardless of model and TTL protocol version.

€499.00*
on stock
45 °Viewfinder Unit II for Nauticam by INON
This viewfinder can be used at all DSLR Underwater Housings by Nauticam. It also fits at: Sony: α1 / A9 / A7RV / A7IV / A7SIII / α2020 / A7RIV / A7RIII / A7II / A7 Nikon: Z9 / Z7 / Z7Ⅴ / Z7II / Z50 Canon: R5C / R3 / R5 / R6 / R7 / EOS R Fujifilm: XT4 / XT3 / GFX100S / GFX100 / GFX50S Panasonic: NA-S1R, NA-S1H Olympus: EM1X The viewfinders are bundled with dedicated tool to remove preinstalled Nauticam viewfinder and install INON viewfinder for self installation. You can refer to instruction movie in addition to the user manual. If you do not have confident on self installation, please contact us for advice. Olympus: NA-EM1X

€599.00*

Similar products

Sony a7 III Underwater Housing by Isotta
Techniques and innovations based on years of experience have resulted in an easy-to-use, highly professional product. Easy access to all major camera controls, even with gloves, through clearly labelled, laser-etched, durable buttons. The back door has a large window glass for a fine camera display and optical viewfinder, and is completely separated from the front body to facilitate camera mounting. The enclosure is very stable due to the sturdy and wide rubber feet on the underside. Open and close with one hand It is very easy to open and close the Sony a7III without any effort by the user thanks to the upper spiral channel and the lower centring pins; the camera is simply placed in the housing on a sliding carriage that holds the camera sturdily in place. Ports and extension rings A range of ports and extension rings are available in the relevant section. The detachable port mounts to the Sony a7III body thanks to markers and a 120mm bayonet mount. The interchangeable ports and extension rings allow the use of most lenses on the market for maximum versatility and Performance. Light Two fibre optic ports allow the use of external flashes through the manual trigger. The housing has three M16 holes for the installation of accessories, e.g. synchro cables, vacuum valves, monitors. Construction and safety Only the best materials are used in the manufacture of our enclosures, such as anodised aluminium, which is corrosion-resistant and thermally coated, and stainless steel. A durable product that requires easy and quick maintenance by the user. Two high precision and high quality O-ring seals protect and ensure perfect and safe watertightness for all moving and / or removable parts; a red moisture / water alarm inside the housing is powered by a user replaceable battery. The working depth is 100 metres. Various accessories can be mounted directly on the handles or by means of an M8 upper threaded hole, with the Isotta upper handle or via the M6 and M8 threaded holes on the bottom. Operation Sony a7 III ON/OFF Ergonomic camera focus and shutter release for easy gloved operation Lens release Rear control panel Upper control panel All controls are on the body Special features Ergonomic side handles, adjustable (via optional accessories); Two fibre optic ports;  Three M16 holes for installation of accessories, e.g. synchro cables, vacuum valves, monitors;  The rear enclosure is fully detachable from the front enclosure; Locking compartment for easy camera insertion; One-handed locking button for the rear housing; Aluminium buttons and dials with engraved symbols identical to the camera controls; Viewfinder glass with wide back; Double O-ring seals on all buttons and removable parts; Humidity sensor with LED indicator (replaceable battery); Detachable port -120 mm bayonet; Safety lock on ports to prevent accidental opening; Wide, rubberised feet for firm footing on boat bottoms or seabed; M8 hole at the top of the housing for various accessories such as focusing lights; Two M6 holes on the bottom of the housing for various accessories such as brackets for strobes or tripods; External viewfinders can be mounted, INON X-2 compatible;

€3,290.00*