Panasonic Lumix G9 Underwater Housing by Nauticam

This item is discontinued. Please find accessories and technical data here.

Product number: NA17715
HAN: NA-G9

Die wichtigsten Kamerasteuerungen sind von den ergonomischen, gummierten Griffen aus leicht erreichbar.  Eine unglaubliche Anzahl von Entwicklungsressourcen gehen in die Gestaltung dieses Designs ein, aber dieser Aufwand zahlt sich mit einer beispiellosen Benutzerfreundlichkeit aus. Die Bedienelemente am Gehäuse sind genau dort platziert, wo sie für den einfachsten Zugang im Wasser sein sollten, unabhängig vom Kamerabau. Ein großer, geformter Auslösehebel befindet sich am rechten Griff für die Zeigefingerbedienung und verfügt über einen patentierten Zahnradmechanismus, der die Empfindlichkeit für das taktile Gefühl von halb und voll gedrücktem Auslöser verbessert. Um den Autofokus der Rücktaste zu erleichtern, wird die AF/AE-Sperrtaste (die zum Aktivieren des AFs neu zugewiesen werden kann) durch einen Daumenhebel in der Nähe des rechten Griffs gesteuert. Kein anderes Gehäuse kommt an diese Art von ergonomischem Zugang zu diesen kritischen Bedienelementen heran.

Das Gehäuse-Verriegelungssystem hat weltweit Anerkennung für seine Einfachheit und Funktionalität gefunden. Diese eingelassenen Verschlüsse sind mit Sicherheitsverriegelungen ausgestattet, reduzieren das Volumen und erfordern minimale körperliche Anstrengung beim Ver- und Entriegeln. Portänderungen waren noch nie so einfach wie mit dem patentierten Nauticam Portverschlusssystem. Kein Kampf, kein Verdrehen, keine Fehlausrichtung - nur Einsetzen und Verriegeln. Der Objektivwechsel ist auch ohne Demontage der Kamera aus dem Gehäuse über die Objektiventriegelungstaste, die logisch an der Gehäusefront zugänglich ist, einfach durchzuführen.

Stativbefestigungspunkte

Die Befestigungspunkte für drei 1-Zoll-Kugelköpfe nach Industriestandard werden direkt in den Gehäuseboden eingearbeitet, so dass keine anderen Zubehörhalterungen zur Befestigung von Stativbeinen erforderlich sind.

Optische Sucher

Der standardmäßige optische Glassucher ist sehr gut und reisefreundlich, aber viele Fotografen bevorzugen die Erleichterungen eines vergrößerten Suchers mit einstellbaren Dioptrien. Nauticam produziert einen "geraden" 180º vergrößernden Sucher und einen um 45º abgewinkelten vergrößernden Sucher, um die Arbeit auf engstem Raum zu erleichtern, die häufig mit Makroaufnahmen verbunden ist. Beide Sucher verfügen über eine hochwertige Optik und ermöglichen eine helle Betrachtung des gesamten Bildes. Eine patentierte externe Dioptrienverstellung ermöglicht eine persönliche, gestochen scharfe Anpassung unter Wasser. Sucherwechsel können in weniger als 30 Sekunden ohne Werkzeug durchgeführt werden. Außergewöhnliche Zusammensetzung und Fokusgenauigkeit waren noch nie so zugänglich.

Hochwertige, professionelle Optik

Erfahrene Fotografen wissen, dass eine Kamera nur so gut ist wie das Objektiv vor ihr, und das Gleiche gilt für die Wahl der Optik für ein Unterwasserkamerasystem.  Eine Vielzahl von Weitwinkel- und Flachports sind im N85-System verfügbar, um einen großen Teil der Micro Four Thirds Open-Standardobjektive aufzunehmen. Die Konfigurationen werden bei Nauticam ausführlich getestet, um die ideale Verlängerungsringlänge für beste Leistung zu bestimmen.

Arm Attachment: 1-inch ballhead
Body Material: aluminum
Camera System: Mirrorless (MIL)
Camera manufacturer: Panasonic
Strobe connector: optical Sea&Sea
Tripod connection: 1 inch ball heads, Thread ¼
portsystem: N85
Weiterlesen
Technical data

  • Material: Aluminium

  • Nenntiefe: 100m

  • Gewicht 2,45kg

  • Abmessungen 331mm x 184mm x 128mm (B x H x T)

  • Portsystem N85

Scope of delivery

  • Panasonic Lumix G9 Unterwassergehäuse von Nauticam

  • Satz Griffhalterungen mit Auslöserverlängerung

  • 2 Handgriffe mit 1-Zoll-Kugelköpfen

  • Ersatz-Haupt O-Ring

  • O-Ring-Entferner und Schmiermittel

  • CR-2032 Batterie (für Feuchtealarm)

  • Inbusschlüssel-Satz

  • Gepolsterte Gehäusetasche und Schultergurt


Es werden ausschließlich die hier aufgeführten Bestandteiles des bestellten Artikels geliefert. Auf unseren Bildern gezeigtes Zubehör und/oder Dekoration dient ausschließlich der Veranschaulichung. Insbesondere weisen wir darauf hin, das bei dem Kauf eines Gehäuses weder ein Port noch die Kamera enthalten sind. Diese sind als Zubehör-Artikel erwerbbar. Wenn Sie Fragen zur Konfiguration Ihres Systems haben, sprechen Sie uns an. 

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.
Mini Flash Trigger for Panasonic Housings
Nauticam flash trigger units allow the use of robust and reliable fiber optic cables to fire external strobes, providing dependable, rapid-fire flash triggering over fiber. Flash triggers allow motor drive shooting sequences, perfect for fast moving action. This flash trigger plugs into the GH5 camera hotshoe and provides an optical signal for fast, continuous strobe firing. Automatic TTL flash control is not supported by this flash trigger, flash power is set manually on the strobe itself.

€295.00*
45° viewfinder for Mirrorless housing from Nauticam
Nauticam's enhanced 45° angle viewfinder is the perfect complement to your MIL housing, providing a bright, clear and undistorted 1:1 image of the camera's viewfinder and a 45° viewing angle. The viewfinder can be rotated to any angle, which is important when shooting in a vertical orientation. The 45º viewfinder also provides more clearance for your controller and allows for a more comfortable viewing position. Introducing the Nauticam 45° viewfinder. Long or short sighted? The viewfinder features an external knob for vision adjustment; hassle-free diopter adjustment can now be easily made underwater without having to disassemble the viewfinder. Proven construction The body is made of anodised aluminium and all lens elements and prisms in the viewfinder are precision ground and multi-layer coated to ensure optimum light transmission and no distortion. Installing the viewfinder With Nauticam housings, it is easy to switch between the standard 0.66x and Enhanced 45° viewfinder, in most cases without tools or adapters. With optional adapter kits, it can also be adapted to Ikelite, Aquatica, Sea & Sea and Nexus housings.

€1,210.00*
on stock
M14 Vacuum Valve II
Installing vacuum valve to housing Remove the plug of the M14 accessory port from the housing. Remove the cap from the vacuum valve. Tighten the vacuum valve to the housing with the tool provided. Building up vacuum Remove the cap of the vacuum valve. Connect the hand pump to the valve and pump several times until it reaches the target vacuum level. The LED light will turn flashing yellow while vacuum is building up, then steady green when the target vacuum level is reached. Attention: After the target vacuum is reached, i.e. steady green light, attach the cap back to the vacuum valve. It is recommended to leave the housing for at least 20mins to ensure it is sealed. If the LED light changes from steady green light to rapidly flashing yellow light, that means there is a leakage and please check every O-ring and conduct the vacuum test again. Please ensure that the cap is attached back to the vacuum valve before going underwater. Vacuum can be released by pushing the red release button. Attention: Please DO NOT attempt to go over the designated vacuum level, i.e. stop pumping when the LED turn green. Excessive vacuum level may lead to the malfunction of the camera and lens. Note: Although the vacuum indicator is designated to compensate for a certain amount of temperature variation, it is recommended to conduct the vacuum test in an environment where the temperature is stable. After set up, the meaning of the LED indicator in the housing: Flashing “Blue” light: Standby mode. The moisture alarm is active, and the system is ready for vacuum indication whenever a vacuum is detected. Flashing “Red” light with beeping sound:Moisture is detected. Flashing “Yellow” light: Some vacuum is detected, target vacuum level is not reached. Steady “Green” light: Target vacuum level is reached. Rapidly flashing “Yellow” light: Vacuum is dropping. (Will occur only after target vacuum level is reached) Rapidly flashing “Red” light: Vacuum is totally lost. Circuit stalled until switched off. (Will occur only after target vacuum level is reached)

€205.00*
Kugelkopf-Set für Stativ (für NA-GH5/G9) von Nauticam
Dieser Bausatz ermöglicht die sichere Montage von Kugelmontagen nach Industriestandard 1 Zoll direkt auf das NA-GH5-Gehäuse, das einen flachen Befestigungspunkt für Stativbeine oder Zubehör-Leuchtenarme bietet.

€77.00*
on stock
Strobe Mounting Ball for Handle
Attaches to housing handles providing a standard 1" ball mount.

€30.00*
on stock
180° straight viewfinder for MIL housing
The Nauticam's 180° enhanced straight viewfinder is the perfect complement to your SLR body, providing a bright, clear and undistorted 1:1 image of the camera's viewfinder and is essential for precise focusing and artistic creation. The straight 180º viewfinder also provides more space for your regulator and allows for a more comfortable viewing position. Diopter adjustment The viewfinder has an external knob to compensate for vision; diopter adjustment can be done easily even when you are underwater, no need to disassemble the viewfinder. Robust construction The housing is made of anodised aluminium and all lens elements and prisms in the viewfinder are precision ground and multi-layer coated to ensure optimum light transmission and no distortion. Mounting the viewfinder With Nauticam housings, it is easy to switch between the standard 0.66x and the extended 180° viewfinder, in most cases without tools or adapters.

€1,440.00*

JTL Cross-selling

Mini Flash Trigger for Panasonic Housings
Nauticam flash trigger units allow the use of robust and reliable fiber optic cables to fire external strobes, providing dependable, rapid-fire flash triggering over fiber. Flash triggers allow motor drive shooting sequences, perfect for fast moving action. This flash trigger plugs into the GH5 camera hotshoe and provides an optical signal for fast, continuous strobe firing. Automatic TTL flash control is not supported by this flash trigger, flash power is set manually on the strobe itself.

€295.00*
45° viewfinder for Mirrorless housing from Nauticam
Nauticam's enhanced 45° angle viewfinder is the perfect complement to your MIL housing, providing a bright, clear and undistorted 1:1 image of the camera's viewfinder and a 45° viewing angle. The viewfinder can be rotated to any angle, which is important when shooting in a vertical orientation. The 45º viewfinder also provides more clearance for your controller and allows for a more comfortable viewing position. Introducing the Nauticam 45° viewfinder. Long or short sighted? The viewfinder features an external knob for vision adjustment; hassle-free diopter adjustment can now be easily made underwater without having to disassemble the viewfinder. Proven construction The body is made of anodised aluminium and all lens elements and prisms in the viewfinder are precision ground and multi-layer coated to ensure optimum light transmission and no distortion. Installing the viewfinder With Nauticam housings, it is easy to switch between the standard 0.66x and Enhanced 45° viewfinder, in most cases without tools or adapters. With optional adapter kits, it can also be adapted to Ikelite, Aquatica, Sea & Sea and Nexus housings.

€1,210.00*
on stock
M14 Vacuum Valve II
Installing vacuum valve to housing Remove the plug of the M14 accessory port from the housing. Remove the cap from the vacuum valve. Tighten the vacuum valve to the housing with the tool provided. Building up vacuum Remove the cap of the vacuum valve. Connect the hand pump to the valve and pump several times until it reaches the target vacuum level. The LED light will turn flashing yellow while vacuum is building up, then steady green when the target vacuum level is reached. Attention: After the target vacuum is reached, i.e. steady green light, attach the cap back to the vacuum valve. It is recommended to leave the housing for at least 20mins to ensure it is sealed. If the LED light changes from steady green light to rapidly flashing yellow light, that means there is a leakage and please check every O-ring and conduct the vacuum test again. Please ensure that the cap is attached back to the vacuum valve before going underwater. Vacuum can be released by pushing the red release button. Attention: Please DO NOT attempt to go over the designated vacuum level, i.e. stop pumping when the LED turn green. Excessive vacuum level may lead to the malfunction of the camera and lens. Note: Although the vacuum indicator is designated to compensate for a certain amount of temperature variation, it is recommended to conduct the vacuum test in an environment where the temperature is stable. After set up, the meaning of the LED indicator in the housing: Flashing “Blue” light: Standby mode. The moisture alarm is active, and the system is ready for vacuum indication whenever a vacuum is detected. Flashing “Red” light with beeping sound:Moisture is detected. Flashing “Yellow” light: Some vacuum is detected, target vacuum level is not reached. Steady “Green” light: Target vacuum level is reached. Rapidly flashing “Yellow” light: Vacuum is dropping. (Will occur only after target vacuum level is reached) Rapidly flashing “Red” light: Vacuum is totally lost. Circuit stalled until switched off. (Will occur only after target vacuum level is reached)

€205.00*
Kugelkopf-Set für Stativ (für NA-GH5/G9) von Nauticam
Dieser Bausatz ermöglicht die sichere Montage von Kugelmontagen nach Industriestandard 1 Zoll direkt auf das NA-GH5-Gehäuse, das einen flachen Befestigungspunkt für Stativbeine oder Zubehör-Leuchtenarme bietet.

€77.00*
on stock
Strobe Mounting Ball for Handle
Attaches to housing handles providing a standard 1" ball mount.

€30.00*
on stock
180° straight viewfinder for MIL housing
The Nauticam's 180° enhanced straight viewfinder is the perfect complement to your SLR body, providing a bright, clear and undistorted 1:1 image of the camera's viewfinder and is essential for precise focusing and artistic creation. The straight 180º viewfinder also provides more space for your regulator and allows for a more comfortable viewing position. Diopter adjustment The viewfinder has an external knob to compensate for vision; diopter adjustment can be done easily even when you are underwater, no need to disassemble the viewfinder. Robust construction The housing is made of anodised aluminium and all lens elements and prisms in the viewfinder are precision ground and multi-layer coated to ensure optimum light transmission and no distortion. Mounting the viewfinder With Nauticam housings, it is easy to switch between the standard 0.66x and the extended 180° viewfinder, in most cases without tools or adapters.

€1,440.00*