+49 2501 9292419
shop@panoceanphoto.com
Shop in Münster
Go to homepage
Wishlist
Shopping cart €0.00*

Panasonic Lumix GX8 Underwater Housing by Nauticam

Panasonic Lumix GX8 Underwater Housing by Nauticam
Panasonic Lumix GX8 Underwater Housing by Nauticam
Panasonic Lumix GX8 Underwater Housing by Nauticam
Panasonic Lumix GX8 Underwater Housing by Nauticam
Panasonic Lumix GX8 Underwater Housing by Nauticam
Photos show accessories that are not part of your order. Only the content of the tab "What's in the box" is relevant.
Panasonic Lumix GX8 Underwater Housing by Nauticam
Panasonic Lumix GX8 Underwater Housing by Nauticam
Panasonic Lumix GX8 Underwater Housing by Nauticam
Panasonic Lumix GX8 Underwater Housing by Nauticam
Panasonic Lumix GX8 Underwater Housing by Nauticam
This item is discontinued. Please find accessories and technical data here.

Product number: NA17711
HAN: NA-GX8

Das NA-GX8 Unterwassergehäuse von Nauticam verfügt über einige der neuesten Technologien von Nauticam - mit der Portverriegelung, die die berühmte DSLR-Portverriegelung von Nauticam nachahmt - und so den Wechsel des Gehäuseports einfacher denn je macht. Das neue Gehäuse nutzt die vielen Funktionen der Panasonic und ermöglicht die einfache Einhandbedienung von Tasten wie den drei Einstellrädern und der Videoaufnahmetaste. Das NA-GX8 unterstützt 7 programmierbare Tasten dieser Kamera, die vom Gehäuse aus leicht zugänglich sind. Der geformte Auslöser macht das "halbe Drücken" des Fokus unglaublich einfach. Für Fans des "Daumenfokus" (Verschieben des Autofokus von der Halbauslösung auf eine mit dem rechten Daumen betätigte Taste) wird dies mit der AF/AEL-Taste vollständig unterstützt.

Underwater Komodo National Park | Indonesia from Hergen Spalink on Vimeo.

Die Liebe zum Detail ist überall vorhanden, von der komfortablen Daumenauflage rechts über die großen gerändelten Bedienräder bis hin zum Zoom-/Fokusknopf. Das Video ist leicht zugänglich; die Video-Taste wird speziell behandelt, da sie größer, konkav und rot ist. Für die Verwendung mit Stativ verfügt das Gehäuse über zwei standardmäßige 1/4? 20 Stativlöcher oder ist auch für die Verwendung des Flexitray W Kameraschachts geeignet (erfordert NA71209 verstellbaren rechten Griff und 71208 FlexiTray II W mit linkem Griff). Der Blitzbetrieb wird über Glasfaser durch den Einsatz des optionalen Panasonic DMW-FL70-S Blitzgerätes unterstützt. Die präzise automatische Blitzbelichtung (TTL-Blitz) erfolgt einfach über Blitze wie den Inon Z-240 oder S-2000.

Nauticam Vakuumprüfsystem

Die Elektronik des Nauticam Vakuumprüf- und Lecksuchsystems ist im Lieferumfang des NA-GX8 enthalten. In Kombination mit einem optionalen Vakuumventil liefert dieses Überwachungssystem ständige Updates über den wasserdichten und tauchsicheren Zustand des Gehäuses. Der Bediener kann auf einen Blick den wasserdichten und tauchsicheren Zustand des Gehäuses erkennen. Ein einfaches, codiertes LED-Beleuchtungssystem zeigt dem Benutzer an, ob das Vakuum stabil ist oder ob das Gehäuse Vakuum verliert. Die Leckageerkennung ist im gleichen Stromkreis integriert, so dass bei Wassereintritt eine akustische und optische Anzeige erfolgt. Das NA-GX8 verfügt über eine zweite Buchse (M14), die speziell für die Installation optionaler Vakuumventile vorgesehen ist, so dass die andere Buchse für HDMI, Synchronkabel und anderes Zubehör erhalten bleibt.

Blitzstecker für INON S-TTL

Mit dem NA-GX8 und einer Vielzahl von optisch gezündeten Blitzen ist eine zuverlässige automatische Blitzbelichtung möglich. Die Blitze Inon Z-240, D-2000, S-2000, S-2000 bieten eine automatisierte Beleuchtung, die den integrierten Blitz der Kamera mit einer proportional höheren Intensität präzise wiedergibt. Dieses System liefert eine präzise automatische TTL-Blitzleistung - auch im manuellen Modus - ohne elektrische Synchronisationskabel! Der NA-GX8 wird faseroptikfertig geliefert und akzeptiert Standard-Sea&Sea-Style-Buchsenanschlüsse. Nauticam Glasfaserkabel, die sowohl für Inon- als auch für Sea&Sea-Blitze erhältlich sind, bieten die beste Lichtdurchlässigkeit und damit eine genauere TTL als jedes Glasfaserkabel auf dem Markt.

externe Sucher

Der standardmäßige optische Glassucher ist sehr gut und reisefreundlich, aber viele Fotografen bevorzugen die Erleichterungen eines vergrößerten Suchers mit einstellbaren Dioptrien. Nauticam produziert einen "geraden" 180º vergrößernden Sucher und einen um 45º abgewinkelten vergrößernden Sucher, um die Arbeit auf engstem Raum zu erleichtern, die häufig mit Makroaufnahmen verbunden ist. Beide Sucher verfügen über eine hochwertige Optik und ermöglichen eine helle Betrachtung des gesamten Bildes. Eine patentierte externe Dioptrienverstellung ermöglicht eine persönliche, gestochen scharfe Anpassung unter Wasser. Sucherwechsel können in weniger als 30 Sekunden ohne Werkzeug durchgeführt werden. Außergewöhnliche Zusammensetzung und Fokusgenauigkeit waren noch nie so zugänglich.

 

Body Material: aluminum
Camera System: Mirrorless (MIL)
Camera manufacturer: Panasonic
Strobe connector: optical INON, optical Sea&Sea
Tripod connection: Thread ¼
portsystem: N85
Weiterlesen
Technical data

  • Material: Aluminium

  • Nenntiefe 100 m

  • Gewicht 1,17 kg

  • Abmessungen 206 mm (B) × 154 mm (H)× 99 mm (T)

  • Portsystem N85

Scope of delivery

  • Panasonic Lumix GX8 Unterwassergehäuse von Nauticam

  • Ersatz-Haupt O-Ring

  • O-Ring-Entferner und Schmiermittel

  • CR-2032 Batterie (für Feuchtealarm)

  • Inbusschlüssel-Satz

  • Satz Griffhalterungen mit Auslöseverlängerung (erfordert NA71209 Verstellbarer rechter Griff und NA71208 FlexiTray II W mit linkem Griff)

  • Gepolsterte Transporttasche

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.
45° viewfinder for Mirrorless housing from Nauticam
45° viewfinder for Mirrorless housing from Nauticam
Nauticam's enhanced 45° angle viewfinder is the perfect complement to your MIL housing, providing a bright, clear and undistorted 1:1 image of the camera's viewfinder and a 45° viewing angle. The viewfinder can be rotated to any angle, which is important when shooting in a vertical orientation. The 45º viewfinder also provides more clearance for your controller and allows for a more comfortable viewing position. Introducing the Nauticam 45° viewfinder. Long or short sighted? The viewfinder features an external knob for vision adjustment; hassle-free diopter adjustment can now be easily made underwater without having to disassemble the viewfinder. Proven construction The body is made of anodised aluminium and all lens elements and prisms in the viewfinder are precision ground and multi-layer coated to ensure optimum light transmission and no distortion. Installing the viewfinder With Nauticam housings, it is easy to switch between the standard 0.66x and Enhanced 45° viewfinder, in most cases without tools or adapters. With optional adapter kits, it can also be adapted to Ikelite, Aquatica, Sea & Sea and Nexus housings.

€1,210.00*
on stock
Easitray II with Left Handle
Easitray II with Left Handle
The Nauticam Easytray is a versatile tray and handle for smaller housings. The Easitray is very similar to the Nauticam Flexitray; however the Easitray left handle is not adjustable. The Easitray is supplied with 1/4 – 20 thumbscrews which fit most tripod mount threads. Thumbscrews in thread #12-24 (for Ikelite Housings) and 6mm thumbscrews are available. The top of the handle accepts Nauticam 1″ balls or T-plate adapters. An adjustable right side handle is available that quickly mounts to this tray. A rubber insert in the base of the tray can reduce scratching of your housing and provides friction to improve camera stability. The Easitray fits a wide variety of cameras and camera housings.

€125.00*
on stock
M14 Vacuum Valve II
M14 Vacuum Valve II
Installing vacuum valve to housing Remove the plug of the M14 accessory port from the housing. Remove the cap from the vacuum valve. Tighten the vacuum valve to the housing with the tool provided. Building up vacuum Remove the cap of the vacuum valve. Connect the hand pump to the valve and pump several times until it reaches the target vacuum level. The LED light will turn flashing yellow while vacuum is building up, then steady green when the target vacuum level is reached. Attention: After the target vacuum is reached, i.e. steady green light, attach the cap back to the vacuum valve. It is recommended to leave the housing for at least 20mins to ensure it is sealed. If the LED light changes from steady green light to rapidly flashing yellow light, that means there is a leakage and please check every O-ring and conduct the vacuum test again. Please ensure that the cap is attached back to the vacuum valve before going underwater. Vacuum can be released by pushing the red release button. Attention: Please DO NOT attempt to go over the designated vacuum level, i.e. stop pumping when the LED turn green. Excessive vacuum level may lead to the malfunction of the camera and lens. Note: Although the vacuum indicator is designated to compensate for a certain amount of temperature variation, it is recommended to conduct the vacuum test in an environment where the temperature is stable. After set up, the meaning of the LED indicator in the housing: Flashing “Blue” light: Standby mode. The moisture alarm is active, and the system is ready for vacuum indication whenever a vacuum is detected. Flashing “Red” light with beeping sound:Moisture is detected. Flashing “Yellow” light: Some vacuum is detected, target vacuum level is not reached. Steady “Green” light: Target vacuum level is reached. Rapidly flashing “Yellow” light: Vacuum is dropping. (Will occur only after target vacuum level is reached) Rapidly flashing “Red” light: Vacuum is totally lost. Circuit stalled until switched off. (Will occur only after target vacuum level is reached)

€205.00*
on stock
Flexitray II with Left Handle
Flexitray II with Left Handle
The Nauticam Flexitray II is a very versatile and easy to use camera tray. Flexitray II W adds two 1/4-20 threaded tripod mounting holes to the popular Flexitray II. The Flexitray II W does not have the anti-rotation feature of the Flexitray II. For compact and point-and-shoot housings that have only one tripod mounting screw, please use the Flexitray II. Comparing Flexitray II (top) with Flexitray II W (bottom) Note the tripod mounting holes in the middle of the Flexitray II W. The left handle of the Flexitray II is adjustable for width (length of tray). If additional length is desired, you may add optional Nauticam 20mm extension or Nauticam 30mm extension to this tray. The handle is also adjustable front and back. This adjustment means the ability to adjust your Flexitray II for much more comfort and camera control than ordinary camera trays. The bottom side of the tray is designed to lay flat. On the top side of the tray is a rubber insert which can reduce the possibility of scratching your housing and, more importantly, increase friction between the camera housing and the tray for improved stability. The Flexitray II is supplied with 1/4 – 20 thumbscrews which fit most tripod mount threads. Thumbscrews in thread #12-24 (Ikelite housings) and 6mm thumbscrews are available. Optional T-groove plates and 1 inch ball adapters are custom designed to fit these handles. An adjustable right side handle is available that quickly mounts to this tray. With the optional Nauticam right-handle kit added the distance from handle to handle can be adjusted from 8+3/4 inch to 10+1/4 inch (center to center measurement).

€175.00*
on stock
180° straight viewfinder for MIL housing
180° straight viewfinder for MIL housing
The Nauticam's 180° enhanced straight viewfinder is the perfect complement to your SLR body, providing a bright, clear and undistorted 1:1 image of the camera's viewfinder and is essential for precise focusing and artistic creation. The straight 180º viewfinder also provides more space for your regulator and allows for a more comfortable viewing position. Diopter adjustment The viewfinder has an external knob to compensate for vision; diopter adjustment can be done easily even when you are underwater, no need to disassemble the viewfinder. Robust construction The housing is made of anodised aluminium and all lens elements and prisms in the viewfinder are precision ground and multi-layer coated to ensure optimum light transmission and no distortion. Mounting the viewfinder With Nauticam housings, it is easy to switch between the standard 0.66x and the extended 180° viewfinder, in most cases without tools or adapters.

€1,440.00*

JTL Cross-selling

45° viewfinder for Mirrorless housing from Nauticam
45° viewfinder for Mirrorless housing from Nauticam
Nauticam's enhanced 45° angle viewfinder is the perfect complement to your MIL housing, providing a bright, clear and undistorted 1:1 image of the camera's viewfinder and a 45° viewing angle. The viewfinder can be rotated to any angle, which is important when shooting in a vertical orientation. The 45º viewfinder also provides more clearance for your controller and allows for a more comfortable viewing position. Introducing the Nauticam 45° viewfinder. Long or short sighted? The viewfinder features an external knob for vision adjustment; hassle-free diopter adjustment can now be easily made underwater without having to disassemble the viewfinder. Proven construction The body is made of anodised aluminium and all lens elements and prisms in the viewfinder are precision ground and multi-layer coated to ensure optimum light transmission and no distortion. Installing the viewfinder With Nauticam housings, it is easy to switch between the standard 0.66x and Enhanced 45° viewfinder, in most cases without tools or adapters. With optional adapter kits, it can also be adapted to Ikelite, Aquatica, Sea & Sea and Nexus housings.

€1,210.00*
on stock
Easitray II with Left Handle
Easitray II with Left Handle
The Nauticam Easytray is a versatile tray and handle for smaller housings. The Easitray is very similar to the Nauticam Flexitray; however the Easitray left handle is not adjustable. The Easitray is supplied with 1/4 – 20 thumbscrews which fit most tripod mount threads. Thumbscrews in thread #12-24 (for Ikelite Housings) and 6mm thumbscrews are available. The top of the handle accepts Nauticam 1″ balls or T-plate adapters. An adjustable right side handle is available that quickly mounts to this tray. A rubber insert in the base of the tray can reduce scratching of your housing and provides friction to improve camera stability. The Easitray fits a wide variety of cameras and camera housings.

€125.00*
on stock
M14 Vacuum Valve II
M14 Vacuum Valve II
Installing vacuum valve to housing Remove the plug of the M14 accessory port from the housing. Remove the cap from the vacuum valve. Tighten the vacuum valve to the housing with the tool provided. Building up vacuum Remove the cap of the vacuum valve. Connect the hand pump to the valve and pump several times until it reaches the target vacuum level. The LED light will turn flashing yellow while vacuum is building up, then steady green when the target vacuum level is reached. Attention: After the target vacuum is reached, i.e. steady green light, attach the cap back to the vacuum valve. It is recommended to leave the housing for at least 20mins to ensure it is sealed. If the LED light changes from steady green light to rapidly flashing yellow light, that means there is a leakage and please check every O-ring and conduct the vacuum test again. Please ensure that the cap is attached back to the vacuum valve before going underwater. Vacuum can be released by pushing the red release button. Attention: Please DO NOT attempt to go over the designated vacuum level, i.e. stop pumping when the LED turn green. Excessive vacuum level may lead to the malfunction of the camera and lens. Note: Although the vacuum indicator is designated to compensate for a certain amount of temperature variation, it is recommended to conduct the vacuum test in an environment where the temperature is stable. After set up, the meaning of the LED indicator in the housing: Flashing “Blue” light: Standby mode. The moisture alarm is active, and the system is ready for vacuum indication whenever a vacuum is detected. Flashing “Red” light with beeping sound:Moisture is detected. Flashing “Yellow” light: Some vacuum is detected, target vacuum level is not reached. Steady “Green” light: Target vacuum level is reached. Rapidly flashing “Yellow” light: Vacuum is dropping. (Will occur only after target vacuum level is reached) Rapidly flashing “Red” light: Vacuum is totally lost. Circuit stalled until switched off. (Will occur only after target vacuum level is reached)

€205.00*
on stock
Flexitray II with Left Handle
Flexitray II with Left Handle
The Nauticam Flexitray II is a very versatile and easy to use camera tray. Flexitray II W adds two 1/4-20 threaded tripod mounting holes to the popular Flexitray II. The Flexitray II W does not have the anti-rotation feature of the Flexitray II. For compact and point-and-shoot housings that have only one tripod mounting screw, please use the Flexitray II. Comparing Flexitray II (top) with Flexitray II W (bottom) Note the tripod mounting holes in the middle of the Flexitray II W. The left handle of the Flexitray II is adjustable for width (length of tray). If additional length is desired, you may add optional Nauticam 20mm extension or Nauticam 30mm extension to this tray. The handle is also adjustable front and back. This adjustment means the ability to adjust your Flexitray II for much more comfort and camera control than ordinary camera trays. The bottom side of the tray is designed to lay flat. On the top side of the tray is a rubber insert which can reduce the possibility of scratching your housing and, more importantly, increase friction between the camera housing and the tray for improved stability. The Flexitray II is supplied with 1/4 – 20 thumbscrews which fit most tripod mount threads. Thumbscrews in thread #12-24 (Ikelite housings) and 6mm thumbscrews are available. Optional T-groove plates and 1 inch ball adapters are custom designed to fit these handles. An adjustable right side handle is available that quickly mounts to this tray. With the optional Nauticam right-handle kit added the distance from handle to handle can be adjusted from 8+3/4 inch to 10+1/4 inch (center to center measurement).

€175.00*
on stock
180° straight viewfinder for MIL housing
180° straight viewfinder for MIL housing
The Nauticam's 180° enhanced straight viewfinder is the perfect complement to your SLR body, providing a bright, clear and undistorted 1:1 image of the camera's viewfinder and is essential for precise focusing and artistic creation. The straight 180º viewfinder also provides more space for your regulator and allows for a more comfortable viewing position. Diopter adjustment The viewfinder has an external knob to compensate for vision; diopter adjustment can be done easily even when you are underwater, no need to disassemble the viewfinder. Robust construction The housing is made of anodised aluminium and all lens elements and prisms in the viewfinder are precision ground and multi-layer coated to ensure optimum light transmission and no distortion. Mounting the viewfinder With Nauticam housings, it is easy to switch between the standard 0.66x and the extended 180° viewfinder, in most cases without tools or adapters.

€1,440.00*