+49 2501 9292419
shop@panoceanphoto.com
Shop in Münster
Go to homepage
Wishlist
Shopping cart €0.00*

Panasonic Lumix DMC-GX85/GX80/GX7 Mark II Underwater Housing by Nauticam

Panasonic Lumix DMC-GX85/GX80/GX7 Mark II Underwater Housing by Nauticam
Panasonic Lumix DMC-GX85/GX80/GX7 Mark II Underwater Housing by Nauticam
Panasonic Lumix DMC-GX85/GX80/GX7 Mark II Underwater Housing by Nauticam
Panasonic Lumix DMC-GX85/GX80/GX7 Mark II Underwater Housing by Nauticam
Panasonic Lumix DMC-GX85/GX80/GX7 Mark II Underwater Housing by Nauticam
Panasonic Lumix DMC-GX85/GX80/GX7 Mark II Underwater Housing by Nauticam
Panasonic Lumix DMC-GX85/GX80/GX7 Mark II Underwater Housing by Nauticam
Panasonic Lumix DMC-GX85/GX80/GX7 Mark II Underwater Housing by Nauticam
Photos show accessories that are not part of your order. Only the content of the tab "What's in the box" is relevant.
Panasonic Lumix DMC-GX85/GX80/GX7 Mark II Underwater Housing by Nauticam
Panasonic Lumix DMC-GX85/GX80/GX7 Mark II Underwater Housing by Nauticam
Panasonic Lumix DMC-GX85/GX80/GX7 Mark II Underwater Housing by Nauticam
Panasonic Lumix DMC-GX85/GX80/GX7 Mark II Underwater Housing by Nauticam
Panasonic Lumix DMC-GX85/GX80/GX7 Mark II Underwater Housing by Nauticam
Panasonic Lumix DMC-GX85/GX80/GX7 Mark II Underwater Housing by Nauticam
Panasonic Lumix DMC-GX85/GX80/GX7 Mark II Underwater Housing by Nauticam
Panasonic Lumix DMC-GX85/GX80/GX7 Mark II Underwater Housing by Nauticam
This item is discontinued. Please find accessories and technical data here.

Product number: NA17712
HAN: NA-GX85

Nauticam-Nutzer finden alle Premium-Features beim NA-GX85, die sie bei den anderen spiegellosen Gehäuse von Nauticam schätzen gelernt haben. Als eine der Gehäusebauformen, die das N85-Portsystem verwenden, gibt es eine Vielzahl von unterstützten Objektiven und Anschlussoptionen für jeden Aufnahmestil.

Die Ingenieure von Nauticam haben hart daran gearbeitet, sicherzustellen, dass alle wichtigen Belichtungs- und Aufnahmesteuerungen gut erreichbar sind, unabhängig davon, wo sich diese Regler oder Tasten an der Kamera befinden.  

Digital Shootout from North American Rolex Scholar on Vimeo.

 

Das NA-GX85 kann mit einer Vielzahl von Zubehörteilen kombiniert werden, um den Bedürfnissen des Fotografen gerecht zu werden.  Von Stativen über Bodenplatten bis hin zu Videomonitoren kann das NA-GX85 in ein vollwertiges Video-Rig umgewandelt werden. Durch die Kombination des NA-GX85 mit dem N85 WWL-1- und CMC-System hat der Filmemacher die Möglichkeit, im selben Tauchgang durch Weitwinkel- und spezielle Makros zu zoomen.

Das NA-GX85 ist mit der vorinstallierten Elektronik des charakteristischen Vakuum- und Lecksuchsystems von Nauticam ausgestattet.  Mit dem Hinzufügen eines Vakuumventils ist das System bereit, über eine große mehrfarbige LED auf der Rückseite des Gehäuses eine ständige Rückmeldung über die Wasserdichtigkeit des Systems zu geben.

Das Nauticam Easi oder Flexitray System ist perfekt geeignet für diejenigen, die ihr NA-GX85 System um Griffe erweitern möchten. Die gleichen Griffe wie bei Spiegelreflexkameras und größeren spiegellosen Systemen sind jetzt für alle Gehäuse erhältlich. Das NA-GX84 wird mit den Stabilisierungsbügeln und der Auslöserverlängerung geliefert, die bei Verwendung des Easi oder Flexitrays benötigt wird.

Die Blitzauslösung erfolgt über integrierte Glasfaserbuchsen, die vom eingebauten Blitz der Kamera aus gesteuert werden. Elektronische Anschlüsse sind auch erhältlich, um ältere Blitze auszulösen, die keine Glasfaserverbindungen akzeptieren.

Body Material: aluminum
Camera System: Mirrorless (MIL)
Camera manufacturer: Panasonic
Strobe connector: optical Sea&Sea
Tripod connection: Thread ¼
portsystem: N85
Weiterlesen
Technical data

  • Material: Aluminium

  • Nenntiefe 100 m

  • Abmessungen: 194 mm (B), 127 mm (H), 102 mm (T)

  • Gewicht: 1,1 kg

  • Portsystem N85

Scope of delivery

  • Panasonic Lumix DMC-GX85/GX80/GX7 Mark II Unterwassergehäuse von Nauticam

  • Satz Griffhalterungen mit Auslöserverlängerung

  • Ersatz-Haupt O-Ring

  • O-Ring-Entferner und Schmiermittel

  • CR-2032 Batterie (für Feuchtealarm)

  • Inbusschlüssel-Satz

  • Gepolsterte Transporttasche


Es werden ausschließlich die hier aufgeführten Bestandteiles des bestellten Artikels geliefert. Auf unseren Bildern gezeigtes Zubehör und/oder Dekoration dient ausschließlich der Veranschaulichung. Insbesondere weisen wir darauf hin, das bei dem Kauf eines Gehäuses weder die Kamera noch Griffe enthalten sind. Diese sind als Zubehör-Artikel erwerbbar. Wenn Sie Fragen zur Konfiguration Ihres Systems haben, sprechen Sie uns an. 

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.
45° viewfinder for Mirrorless housing from Nauticam
45° viewfinder for Mirrorless housing from Nauticam
Nauticam's enhanced 45° angle viewfinder is the perfect complement to your MIL housing, providing a bright, clear and undistorted 1:1 image of the camera's viewfinder and a 45° viewing angle. The viewfinder can be rotated to any angle, which is important when shooting in a vertical orientation. The 45º viewfinder also provides more clearance for your controller and allows for a more comfortable viewing position. Introducing the Nauticam 45° viewfinder. Long or short sighted? The viewfinder features an external knob for vision adjustment; hassle-free diopter adjustment can now be easily made underwater without having to disassemble the viewfinder. Proven construction The body is made of anodised aluminium and all lens elements and prisms in the viewfinder are precision ground and multi-layer coated to ensure optimum light transmission and no distortion. Installing the viewfinder With Nauticam housings, it is easy to switch between the standard 0.66x and Enhanced 45° viewfinder, in most cases without tools or adapters. With optional adapter kits, it can also be adapted to Ikelite, Aquatica, Sea & Sea and Nexus housings.

€1,210.00*
on stock
M14 Vacuum Valve II
M14 Vacuum Valve II
Installing vacuum valve to housing Remove the plug of the M14 accessory port from the housing. Remove the cap from the vacuum valve. Tighten the vacuum valve to the housing with the tool provided. Building up vacuum Remove the cap of the vacuum valve. Connect the hand pump to the valve and pump several times until it reaches the target vacuum level. The LED light will turn flashing yellow while vacuum is building up, then steady green when the target vacuum level is reached. Attention: After the target vacuum is reached, i.e. steady green light, attach the cap back to the vacuum valve. It is recommended to leave the housing for at least 20mins to ensure it is sealed. If the LED light changes from steady green light to rapidly flashing yellow light, that means there is a leakage and please check every O-ring and conduct the vacuum test again. Please ensure that the cap is attached back to the vacuum valve before going underwater. Vacuum can be released by pushing the red release button. Attention: Please DO NOT attempt to go over the designated vacuum level, i.e. stop pumping when the LED turn green. Excessive vacuum level may lead to the malfunction of the camera and lens. Note: Although the vacuum indicator is designated to compensate for a certain amount of temperature variation, it is recommended to conduct the vacuum test in an environment where the temperature is stable. After set up, the meaning of the LED indicator in the housing: Flashing “Blue” light: Standby mode. The moisture alarm is active, and the system is ready for vacuum indication whenever a vacuum is detected. Flashing “Red” light with beeping sound:Moisture is detected. Flashing “Yellow” light: Some vacuum is detected, target vacuum level is not reached. Steady “Green” light: Target vacuum level is reached. Rapidly flashing “Yellow” light: Vacuum is dropping. (Will occur only after target vacuum level is reached) Rapidly flashing “Red” light: Vacuum is totally lost. Circuit stalled until switched off. (Will occur only after target vacuum level is reached)

€205.00*
on stock
180° straight viewfinder for MIL housing
180° straight viewfinder for MIL housing
The Nauticam's 180° enhanced straight viewfinder is the perfect complement to your SLR body, providing a bright, clear and undistorted 1:1 image of the camera's viewfinder and is essential for precise focusing and artistic creation. The straight 180º viewfinder also provides more space for your regulator and allows for a more comfortable viewing position. Diopter adjustment The viewfinder has an external knob to compensate for vision; diopter adjustment can be done easily even when you are underwater, no need to disassemble the viewfinder. Robust construction The housing is made of anodised aluminium and all lens elements and prisms in the viewfinder are precision ground and multi-layer coated to ensure optimum light transmission and no distortion. Mounting the viewfinder With Nauticam housings, it is easy to switch between the standard 0.66x and the extended 180° viewfinder, in most cases without tools or adapters.

€1,440.00*

JTL Cross-selling

45° viewfinder for Mirrorless housing from Nauticam
45° viewfinder for Mirrorless housing from Nauticam
Nauticam's enhanced 45° angle viewfinder is the perfect complement to your MIL housing, providing a bright, clear and undistorted 1:1 image of the camera's viewfinder and a 45° viewing angle. The viewfinder can be rotated to any angle, which is important when shooting in a vertical orientation. The 45º viewfinder also provides more clearance for your controller and allows for a more comfortable viewing position. Introducing the Nauticam 45° viewfinder. Long or short sighted? The viewfinder features an external knob for vision adjustment; hassle-free diopter adjustment can now be easily made underwater without having to disassemble the viewfinder. Proven construction The body is made of anodised aluminium and all lens elements and prisms in the viewfinder are precision ground and multi-layer coated to ensure optimum light transmission and no distortion. Installing the viewfinder With Nauticam housings, it is easy to switch between the standard 0.66x and Enhanced 45° viewfinder, in most cases without tools or adapters. With optional adapter kits, it can also be adapted to Ikelite, Aquatica, Sea & Sea and Nexus housings.

€1,210.00*
on stock
M14 Vacuum Valve II
M14 Vacuum Valve II
Installing vacuum valve to housing Remove the plug of the M14 accessory port from the housing. Remove the cap from the vacuum valve. Tighten the vacuum valve to the housing with the tool provided. Building up vacuum Remove the cap of the vacuum valve. Connect the hand pump to the valve and pump several times until it reaches the target vacuum level. The LED light will turn flashing yellow while vacuum is building up, then steady green when the target vacuum level is reached. Attention: After the target vacuum is reached, i.e. steady green light, attach the cap back to the vacuum valve. It is recommended to leave the housing for at least 20mins to ensure it is sealed. If the LED light changes from steady green light to rapidly flashing yellow light, that means there is a leakage and please check every O-ring and conduct the vacuum test again. Please ensure that the cap is attached back to the vacuum valve before going underwater. Vacuum can be released by pushing the red release button. Attention: Please DO NOT attempt to go over the designated vacuum level, i.e. stop pumping when the LED turn green. Excessive vacuum level may lead to the malfunction of the camera and lens. Note: Although the vacuum indicator is designated to compensate for a certain amount of temperature variation, it is recommended to conduct the vacuum test in an environment where the temperature is stable. After set up, the meaning of the LED indicator in the housing: Flashing “Blue” light: Standby mode. The moisture alarm is active, and the system is ready for vacuum indication whenever a vacuum is detected. Flashing “Red” light with beeping sound:Moisture is detected. Flashing “Yellow” light: Some vacuum is detected, target vacuum level is not reached. Steady “Green” light: Target vacuum level is reached. Rapidly flashing “Yellow” light: Vacuum is dropping. (Will occur only after target vacuum level is reached) Rapidly flashing “Red” light: Vacuum is totally lost. Circuit stalled until switched off. (Will occur only after target vacuum level is reached)

€205.00*
on stock
180° straight viewfinder for MIL housing
180° straight viewfinder for MIL housing
The Nauticam's 180° enhanced straight viewfinder is the perfect complement to your SLR body, providing a bright, clear and undistorted 1:1 image of the camera's viewfinder and is essential for precise focusing and artistic creation. The straight 180º viewfinder also provides more space for your regulator and allows for a more comfortable viewing position. Diopter adjustment The viewfinder has an external knob to compensate for vision; diopter adjustment can be done easily even when you are underwater, no need to disassemble the viewfinder. Robust construction The housing is made of anodised aluminium and all lens elements and prisms in the viewfinder are precision ground and multi-layer coated to ensure optimum light transmission and no distortion. Mounting the viewfinder With Nauticam housings, it is easy to switch between the standard 0.66x and the extended 180° viewfinder, in most cases without tools or adapters.

€1,440.00*