Panasonic Lumix DMC-LX10 (+LX15) Underwater housing by Nauticam

This item is discontinued. Please find accessories and technical data here.

Product number: NA17714

HAN: NA-LX10

Nauticam first "endorsed" the LX series in early 2011 with the LX5, recognising the image quality and performance of this compact system. The housing for the LX7 followed in 2013 and the NA-LX10 benefits from this lineage and is the most refined of the LX housings to date. This is a compact underwater housing that allows the user to realise the full potential of the advanced compact camera in the water.

All the basic features and ergonomic improvements that Nauticam users have come to know and love are built into NA-LX10. The housing is made from a solid block of aluminium and then hard anodised to seal out corrosive salt water. It is closed by a simple but secure locking twist latch. The right side of the housing is shaped to fit in the palm of the user's hand, and Nauticam's two-stage release lever allows clear distinction between the half-pressure and full-pressure positions. All functions are clearly labelled and an m14 accessory socket allows the installation of an optional vacuum valve.

The LX10 camera presents some unique challenges to the housing designer - in particular the aperture ring, aspect ratio control and on/off switch. Although this requires pre-setting these three controls when installing and removing the camera, this housing gives the user complete and very ergonomic control over these important functions and even goes so far as to label the stops/positions for all three controls.

The zoom lever is positioned for easy access and allows the video producer to zoom smoothly. A locking ring prevents overzoom when using the short connector.

This housing also includes grip mounts and a shutter release extension for use with the optional Flexitray or Easitray, which provides extra stability - important when shooting high-definition video.

The Nauticam leak alarm and vacuum monitoring system is installed as standard. This system gives an audible and visual alarm whenever water enters the enclosure, and when combined with an additional M14 vacuum valve (#25624), the watertight integrity of the system can be tested before entering the water and monitored during each dive.

Integrated vacuum check and leakage warning system

The Nauticam vacuum testing and leakage warning system is supplied as standard with NA-LX10. In combination with an additional vacuum valve, this monitoring system provides constantly updated information on the watertight and safe diving condition of the enclosure. A simple colour-coded LED lighting system indicates to the user that the internal pressure is constant or if the enclosure is losing vacuum. Leak detection is integrated into the same circuit so that an audible and visual indication is given in the event of water ingress. The Nauticam system is temperature compensated and eliminates false alarms caused by a change in outside temperature or by a camera heating up during an action-packed dive.

Attachment lens thread:	M67
Body Material:	aluminum
Camera System:	Compact camera
Camera manufacturer:	Panasonic
Pane material:	Optical glass
Port shape:	flat port
Strobe connector:	optical Sea&Sea
Tripod connection:	Thread ¼
portsystem:	Fixed port

Technical data

Material: aluminium

Weight: 0.84 kg

Dimensions: 170mm (W) × 116mm (H) × 102mm (D)

Nominal depth: 100m

Scope of delivery

Panasonic Lumix DMC-LX10 (+LX15) Underwater Housing by Nauticam

A pair of grip mounts with screws

Shutter release extension

Replacement O-ring for the housing

O-ring remover and lubricant

CR2032 battery

Allen key set

Padded carrying bag

Only the components of the ordered item listed here will be delivered. Accessories and/or decoration shown in our pictures are for illustration purposes only. In particular, we would like to point out that often neither an external viewfinder nor handles are included with the purchase of a housing. These can be purchased as accessory items. If you have any questions about the configuration of your system, please contact us.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Be the first to share your insights.

Please enter a valid email address.

Your question *

Please enter a valid question.

I agree that my data will be processed to answer the question. I have taken note of the Privacy Policy and agree to the information described therein.*

Fields marked with * are mandatory.

There aren't any asked questions yet.

Similar products

Panasonic Lumix DMC-LX10/LX15 Pro Package

Das Panasonic Lumix DMC-LX10 (Lumix DMC-LX15) Pro Package besteht aus: NA-LX10 Unterwassergehäuse von Nauticam Griffplatte mit 1-Zoll-Kugelköpfen Befestigung für Griffplatte Auslöserverlängerung Vakuumventil große gepolsterte Transporttasche Nauticam hat die LX-Serie Anfang 2011 erstmals mit dem LX5 "unterstützt" und damit die Bildqualität und Leistungsfähigkeit dieses kompakten Systems erkannt. Das Gehäuse für den LX7 folgte 2013. Der NA-LX10 profitiert von dieser Linie und ist das bisher raffinierteste der LX-Gehäuse. Dies ist ein kompaktes Unterwassergehäuse, das es dem Benutzer ermöglicht, das volle Potenzial der fortschrittlichen Kompaktkamera im Wasser zu nutzen. Alle Grundfunktionen und ergonomischen Verbesserungen, die Nauticam-Anwender inzwischen kennen und lieben, sind in NA-LX10 integriert. Das Gehäuse wird aus einem massiven Aluminiumblock gefertigt und anschließend hart anodisiert, um korrodierendes Salzwasser zu versiegeln. Sie wird über eine einfache, aber sichere, verriegelnde Drehfalle geschlossen. Die rechte Seite des Gehäuses ist so geformt, dass sie in die Handfläche des Benutzers passt, und der zweistufige Auslöserhebel von Nauticam ermöglicht eine klare Unterscheidung zwischen der Position des halben Drucks und des vollen Drucks. Alle Funktionen sind klar gekennzeichnet, und eine m14-Zubehörsteckdose ermöglicht den Einbau eines optionalen Vakuumventils. Die LX10-Kamera stellt einige besondere Herausforderungen an den Gehäusedesigner - insbesondere den Blendenring, den Seitenverhältnisregler und den Ein-/Ausschalter. Obwohl dies eine Voreinstellung dieser drei Bedienelemente beim Ein- und Ausbau der Kamera erfordert, bietet dieses Gehäuse dem Benutzer eine vollständige und sehr ergonomische Kontrolle über diese wichtigen Funktionen und geht sogar so weit, die Anschläge/Positionen für alle drei Bedienelemente zu beschriften. Der Zoomhebel ist so platziert, dass er leicht zugänglich ist und dem Videoproduzenten ein sanftes Zoomen ermöglicht. Ein Sicherungsring verhindert ein Überzoomen bei Verwendung des kurzen Anschlusses. Dieses Gehäuse beinhaltet auch Griffhalterungen und eine Auslöserverlängerung für die Verwendung mit dem optionalen Flexitray oder Easitray, die zusätzliche Stabilität bietet - wichtig bei der Aufnahme von hochauflösenden Videos. Das Leckalarm- und Vakuumüberwachungssystem Nauticam ist serienmäßig installiert. Dieses System gibt einen akustischen und visuellen Alarm bei jedem Wassereintritt in das Gehäuse, und wenn es mit einem zusätzlichen M14-Vakuumventil (#25624) kombiniert wird, kann die wasserdichte Integrität des Systems vor dem Eindringen in das Wasser getestet und bei jedem Tauchgang überwacht werden. Intergriertes Vakuumüberprüfung- und Leckagewarnsystem Das Nauticam Vakuumprüf- und Lecakgewarnystem wird standardmäßig mit NA-LX10 geliefert. In Kombination mit dem Vakuumventil liefert dieses Überwachungssystem ständig aktuelle Informationen über den wasserdichten und sicheren Tauchzustand des Gehäuses. Ein einfaches, farbcodiertes LED-Beleuchtungssystem zeigt dem Benutzer an, dass der Innerdruck konstant ist oder ob das Gehäuse Vakuum verliert. Die Leckageerkennung ist im gleichen Stromkreis integriert, so dass bei Wassereintritt eine akustische und optische Anzeige erfolgt. Das Nauticam-System ist temperaturkompensiert und eliminiert Fehlalarme, die durch eine Änderung der Außentemperatur oder durch die Erwärmung einer Kamera bei einem actionreichen Tauchgang verursacht werden.

Panasonic Lumix DMC-LX15 Underwater housing by Isotta

The housing for Panasonic Lumix DMC-LX10 and Panasonic Lumix DMC-LX15 allows to capitalize on the camera full potential and to capture amazing pictures underwater. Product details Isotta Underwater Housing for Panasonic Lumix DMC-LX10 and Panasonic Lumix DMC-LX15 An easy to use, highly professional product has been created through techniques and innovations gained from years of experience. The housing for Panasonic Lumix DMC-LX10 and Panasonic Lumix DMC-LX15 perfect handling by means of an adjustable strips. Easy access to all key/main camera controls by means of clearly labelled laser-engraved longlasting buttons. An easy and quick release camera mounting plate allows the camera positioning; the back door has a large window for a fine camera display view and it is entirely detached from the front body to make easier the camera fitting. ONE HAND OPEN/CLOSE It's very easy to open and close Panasonic Lumix DMC-LX10 and Panasonic Lumix DMC-LX15, without any efforts by the user thanks to the side helicoid screw and the bottom centered pins; the camera is placed easily into the housing on a sliding tray that keeps the camera robustly in place. A lever locks the tray safely inside the housing. The housing stands with great stability due to sturdy and wide rubber feet located on the bottom. PORT, CLOSE-UP AND WIDE-ANGLE LENSES Front portholes are built with high quality standards of materials to ensure a perfect image quality. A removable flat port is fitted thanks to markers and a bayonet connection to Panasonic Lumix DMC-LX10 and Panasonic Lumix DMC-LX15 housing. A M67 threaded end allows the use of additional wet wide angle lenses and macro lenses. LIGHTING Panasonic Lumix DMC-LX10 and Panasonic Lumix DMC-LX15 own strobe lighting can be used fitting an outside diffuser on the porthole. For better performance with wide angle lenses, one or two external strobes can be connected by optical fiber using the adaptor included. CONSTRUCTION AND SAFETY Only the best materials are used to manufacture our housings such anodized aluminum which is anticorodal and thermo-coated and stainless steel. A longlasting product that requires easy and simple maintenance by the user. So small and so rich in technology! Dual high precision and quality O-Ring seals protect and ensure a perfect and secure watertight for all movable and / or removable parts; a red alarm for humidity/water inside the housing is powered by a battery replaceable by the user. Working depth is 100 metres. An hole positioned on the bottom allows to secure the housing for Panasonic Lumix DMC-LX10 and Panasonic Lumix DMC-LX15 with a line/strap. Different accessories can be fitted by means of an threaded M8 hole and double threaded M6 holes and one 1/4W on the bottom. Controls ON/OFF of Panasonic Lumix DMC-LX10 and Panasonic Lumix DMC-LX15 Own camera strobe open/close Ergonomic camera focusing and shutter button for an easy use with gloves Shutter speed priority and all other button of the camera Lens aperture Highlights All Panasonic Lumix DMC-LX10 and Panasonic Lumix DMC-LX15 key main controls M16x1 hole for vacuum system or external monitor Easy one hand housing open/close Moisture sensor Double high precision and quality O-Ring seals

€1,140.00*

on stock

M14 Vacuum Valve II

Installing vacuum valve to housing Remove the plug of the M14 accessory port from the housing. Remove the cap from the vacuum valve. Tighten the vacuum valve to the housing with the tool provided. Building up vacuum Remove the cap of the vacuum valve. Connect the hand pump to the valve and pump several times until it reaches the target vacuum level. The LED light will turn flashing yellow while vacuum is building up, then steady green when the target vacuum level is reached. Attention: After the target vacuum is reached, i.e. steady green light, attach the cap back to the vacuum valve. It is recommended to leave the housing for at least 20mins to ensure it is sealed. If the LED light changes from steady green light to rapidly flashing yellow light, that means there is a leakage and please check every O-ring and conduct the vacuum test again. Please ensure that the cap is attached back to the vacuum valve before going underwater. Vacuum can be released by pushing the red release button. Attention: Please DO NOT attempt to go over the designated vacuum level, i.e. stop pumping when the LED turn green. Excessive vacuum level may lead to the malfunction of the camera and lens. Note: Although the vacuum indicator is designated to compensate for a certain amount of temperature variation, it is recommended to conduct the vacuum test in an environment where the temperature is stable. After set up, the meaning of the LED indicator in the housing: Flashing “Blue” light: Standby mode. The moisture alarm is active, and the system is ready for vacuum indication whenever a vacuum is detected. Flashing “Red” light with beeping sound:Moisture is detected. Flashing “Yellow” light: Some vacuum is detected, target vacuum level is not reached. Steady “Green” light: Target vacuum level is reached. Rapidly flashing “Yellow” light: Vacuum is dropping. (Will occur only after target vacuum level is reached) Rapidly flashing “Red” light: Vacuum is totally lost. Circuit stalled until switched off. (Will occur only after target vacuum level is reached)

€205.00*

on stock

Adjustable Right Handle for Easitray & Flexitray II

An adjustable right-side handle is designed to fit the Nauticam Easitray and Nauticam Flexitray system. The right handle is shipped ready to mount to the Flexitray II and Easitray II. Included are two marine grade stainless steel screws to mount the right handle to your tray. This right side handle, as with the left side handle, is designed to accept the Nauticam base ball 1″ ball adapter. The right side handle can be adjusted for spacing both left-to-right and front-to-back. If additional length is needed, add an optional Nauticam 20mm Extension or Nauticam 30mm Extension is available.

€55.00*

LCD Magnifier attachment rails for NA-RX100III/RX100IV/RX100V

The mounting rails are required to attach the LCD enlarger to the following Nauticam underwater housings: -NA-RX100III -NA-RX100IV -NA-RX100V -NA-RX100VI -NA-LX10/NA-RX100III NA-RX100IV NA-RX100V NA-RX100VI NA-LX10/15

€33.00*

on stock

Flexitray II with Left Handle

The Nauticam Flexitray II is a very versatile and easy to use camera tray. Flexitray II W adds two 1/4-20 threaded tripod mounting holes to the popular Flexitray II. The Flexitray II W does not have the anti-rotation feature of the Flexitray II. For compact and point-and-shoot housings that have only one tripod mounting screw, please use the Flexitray II. Comparing Flexitray II (top) with Flexitray II W (bottom) Note the tripod mounting holes in the middle of the Flexitray II W. The left handle of the Flexitray II is adjustable for width (length of tray). If additional length is desired, you may add optional Nauticam 20mm extension or Nauticam 30mm extension to this tray. The handle is also adjustable front and back. This adjustment means the ability to adjust your Flexitray II for much more comfort and camera control than ordinary camera trays. The bottom side of the tray is designed to lay flat. On the top side of the tray is a rubber insert which can reduce the possibility of scratching your housing and, more importantly, increase friction between the camera housing and the tray for improved stability. The Flexitray II is supplied with 1/4 – 20 thumbscrews which fit most tripod mount threads. Thumbscrews in thread #12-24 (Ikelite housings) and 6mm thumbscrews are available. Optional T-groove plates and 1 inch ball adapters are custom designed to fit these handles. An adjustable right side handle is available that quickly mounts to this tray. With the optional Nauticam right-handle kit added the distance from handle to handle can be adjusted from 8+3/4 inch to 10+1/4 inch (center to center measurement).

€175.00*

LCD Magnifier with Dioptric Adjustment

The LCD Magnifier uses a specially designed underwater +10 achromatic optic and features a dioptric adjustment so the user can dial in the lens correction to get a very sharp view of the camera LCD. The molded rubber sunshade virtually eliminates problems seeing the LCD in bright sunlight.

€225.00*

Panasonic Lumix DMC-LX10 (+LX15) Underwater housing by Nauticam

Login

Ask a question

Previously asked questions