T-HOUSING Adapter

High end aluminum housing for your GoPro Hero 5, 6 and 7 black CNC milled from a single from an aluminum block and hard anodized Waterproof up to 150m Optimal heat dissipation – practically fog-free Replaceable zinc sacrificial anode Optional magnetic filter system and magnetic macro lens Attachment via two 1/4? camera threads on the housing base. If you need a GoPro-compatible attachment option, there is an appropriate adapter, which must be ordered separately. Scope of delivery: aluminum housing with front and rear rubber protective cap The camera shown for illustration is NOT included in the scope of delivery. This product and/or service is not affiliated with, endorsed by or in any way associated with GoPro Inc. or its products and services. GoPro, HERO, Session and their respective logos are trademarks or registered trademarks of GoPro, Inc.

With the T-HOUSING underwater housing for your GoPro® Hero 8, you will break through every limit: extremely durable and yet super light, there are no more limits for you. Best quality from the German manufacturer. The aluminium housing ensures optimum heat dissipation and is therefore virtually fog-free. Its stability not only allows it to be used at (almost) any diving depth, it also protects the camera from the hardest impacts. As with the Osmo housing, the underwater housing for the Hero 8 now comes with a new optional accessory: the magnetic diving filter set and the magnetic filter frame with macro lens. A magnetic filter parking station is now available for all housings. Screwed onto a diving rail, the park station can be used to quickly and easily "park" magnetic filters or the macro lens that are not needed at the moment. As always, every single enclosure is tested in the pressure chamber beforehand - in this case up to 250m diving depth!

The T-HOUSING Classic underwater housing makes your GoPro® Hero 5/6/7 black fit for any adventure: extremely durable and yet super light, you are prepared for (almost) anything. Best quality from the German manufacturer. The aluminium housing ensures optimum heat dissipation and is therefore virtually fog-free. Its stability not only ensures possible use at (almost) any diving depth - it also protects the camera from the hardest impacts. An optional flip-up filter system that allows the use of two filters mounted at the same time or a filter and a macro attachment (+10 dioptre macro lens) optimally complements the housing function.

The CNC-machined T-HOUSING aluminium housing has been tested to a depth of 250m and offers several new features that have never been seen before. These include the magnetic filter system and a heat dissipation system derived from the semiconductor industry, through which the entire housing serves as a heat sink for the camera electronics. Especially at high resolutions and when using stabilisation, the camera is thus optimally cooled and automatic shutdowns due to overheating are a thing of the past. Made in Germany All housing parts are individually milled from an aluminium block using state-of-the-art CNC machines. The assembly and subsequent testing of each case is carried out under the strictest quality requirements in Germany. No overheating The optimal heat dissipation of the aluminium housing and a heat bridge to the camera originating from the semiconductor industry ensure that the camera is safe from fogging on the front lens Clear view without desiccant! Neodymium magnets are integrated into the front glass for easy and flexible filter mounting. Always well protected The extremely sturdy shell protects your valuable camera from water and the toughest knocks. The replaceable zinc sacrificial anode also protects your case in case of damage.

High-end aluminum housing for the GoPro Hero 8 with space for the optional H8ENERGY power bank and charging adapter. Triple your battery capacity above and under water! CNC machined from a single aluminum block and hard anodized Waterproof up to 250m Optimal heat dissipation - practically fog-free Replaceable zinc sacrificial anode Optional magnetic filter set and magnetic macro lens Attachment via two 1/4 Inch camera threads on the housing base. If you need a GoPro-compatible mounting option, there is a corresponding adapter, which must be ordered separately. The illustrated camera and the H8ENERGY power bank adapter are NOT included in the scope of delivery.

This adapter triples the battery capacity of your Hero 8 and also serves as a charging cradle. Equipped with two original GoPro batteries (not included), the H8ENERGY adapter is simply plugged into the Hero 8 and supplies it with additional energy.

High End Aluminium Housing for GoPro HERO 12/11/10 and 9 black  CNC machined from one block of aluminium and hard anodised . Waterproof up to 250m Optimum heat dissipation – thus virtually fog-free . Replaceable zinc sacrificial anode Optional magnetic filter set and magnetic macro lens . Mounts via two 1/4′ camera threads on the bottom of the housing. If you need a GoPro-compatible mounting option, a corresponding adapter is available, but must be ordered separately. The neoprene bag is included in the scope of delivery. The camera pictured for illustration purposes is NOT included in the scope of delivery. This product is not owned, supported by, or affiliated in any way with GoPro Inc. or its products and services. GoPro, HERO and corresponding logos are trademarks or registered trademarks of GoPro, Inc. .

T-HOUSING DOME1 The new T-HOUSING DOME1 for the Insta360 ONE R with 1-inch module raises underwater recording quality to a completely new level that was previously only possible with digital system or SLR cameras in combination with high-priced housings. On this basis, an underwater housing has been created that not only shines with the quality of the camera, but also with outstanding optical qualities that are unique in this price segment. What is the issue with a flat front glass in underwater housings? It refracts the incoming light rays by about 25 percent. This also increases the focal length accordingly and reduces the angle of view. Radial distortions occur. The effect is a blurring that increases from the sharpest point in the centre of the image to the outer edge. Chromatic aberrations occur, light rays are refracted unevenly as they pass from the water into the housing, causing the different colours to shift - especially in the outer areas. The dome aperture of a dome port almost completely eliminates these effects: The angle of view is maintained, the image is not distorted towards the edge and the images are sharp right to the edge. To make the use of a dome port possible for the Insta360 ONE R 1-inch, a coated correction lens is used. This can be slid down by a handle, enabling sharp shots even above water after surfacing. The same magnetic sliding system is used for the two integrated colour filters (red and magenta). It has never been so easy to use the colour filters flexibly underwater. The DOME1 is made of aluminium and "Made in Germany". The dome base is not attached to the housing, but the complete base housing and the dome base consist of only one part, which is milled from a 5kg aluminium block. Each housing is pressure tested to a maximum depth of 80m before delivery. The DOME1 enables underwater recording quality for which you previously had to invest several thousand euros. Nevertheless, it is light and compact enough to fit in small luggage. The total weight with camera is about 1150g, whereby it has so much buoyancy underwater that together with the T-HOUSING aluminium dive mount (item no. TH20017901) it only has a slight downward thrust and almost floats in the water. The DOME1 comes fully equipped with lens and filter system, fully assembled and with a neoprene bag. The standard battery or the larger boosted battery can be used, as a corresponding adapter is included.

More power underwater for the GoPro HERO9 and HERO10 black With the T-Housing H10 Power it is also possible to use the GoPro underwater in combination with the Digipower Re-Fuel Hero 9&10 battery pack. Above water, long recordings at high resolutions and frame rates are limited to the battery life. With the battery pack underwater, not only is battery life maximized - the T-Housing aluminum housing becomes a giant heat sink underwater. This makes recordings of 5 - 6 hours possible. Each T-HOUSING consists of a high-quality aluminum alloy for maximum stability. All housing parts are individually milled from a single aluminum block using the latest CNC machines. Each housing is individually pressure tested after production. Optimal protection and outstanding function The extremely stable housing protects your valuable camera from water and the hardest blows – down to a diving depth of 250m. Due to the optimal heat dissipation of the aluminum housing, your camera is protected against fogging on the front lens – clear view without desiccant! Each T-HOUSING can be mounted by using two 1/4″ tripod threads, for which there is also an optional non-rotating adapter to standard GoPro attachments.

Waterproof up to 250m Optimal heat dissipation – practically fog-free Replaceable zinc sacrificial anode Prepared for the optional magnetic filter set Attachment via two 1/4″ camera threads on the housing base. If you need a GoPro-compatible attachment option, there is an appropriate adapter, which must be ordered separately. This product and/or service is not affiliated with, endorsed by or in any way associated with SZ DJI Technology Co., Ltd. or its products and services. DJI, Osmo and their respective logos are trademarks or registered trademarks of SZ DJI Technology Co., Ltd.