+49 2501 9292419
shop@panoceanphoto.com
Shop in Münster
Go to homepage
Wishlist
Shopping cart €0.00*

OM-System Tough TG-7 underwater housing by Nauticam

OM-System Tough TG-7 underwater housing by Nauticam
OM-System Tough TG-7 underwater housing by Nauticam
OM-System Tough TG-7 underwater housing by Nauticam
OM-System Tough TG-7 underwater housing by Nauticam
OM-System Tough TG-7 underwater housing by Nauticam
OM-System Tough TG-7 underwater housing by Nauticam
Photos show accessories that are not part of your order. Only the content of the tab "What's in the box" is relevant.
OM-System Tough TG-7 underwater housing by Nauticam
OM-System Tough TG-7 underwater housing by Nauticam
OM-System Tough TG-7 underwater housing by Nauticam
OM-System Tough TG-7 underwater housing by Nauticam
OM-System Tough TG-7 underwater housing by Nauticam
OM-System Tough TG-7 underwater housing by Nauticam
on stock

€985.00*

Prices incl. VAT plus shipping costs

2 in stock

Free shipping

Delivery time: 1-3 working days*

Product number: NA17820
HAN: NA-TG7
Available stock: 2

The OM-System Tough TG-7 is the latest in their line of IP6X rated go-anywhere compact cameras. The TG-6, which also works inside the NA-TG7 housing, was a huge hit amongst underwater photographers as it was able to capture even super-macro images without any need for diopters. The TG-7 is a clear example of Olympus' drive to create a camera that rises to meet the ever-evolving needs of the traveling compact camera user.

The OM-System Tough TG-7 Camera

The Olympus TG-7 shares the same 12MP BSI CMOS sensor with the TruePic VIII quad-core processor. The camera itself is IP6X rated to be waterproof up to 50ft (which is actually IPX8 spec!) as well as crushproof to 220lbf and freezeproof to 14º F and features an upgraded rear LCD screen. The feature that made the TG-5 a true macro game-changer was the 1cm minimum focus distance. For the TG-6, this feature has seen stronger implementation through the ability to use it outside of the dedicated Microscope Mode.

Key Camera Specifications

  • 12MP BSI CMOS sensor
  • Waterproof to 50ft
  • 4K/30p UHD Video Capture
  • 1080/120p FHD High-speed Video Capture
  • Selectable Underwater White Balance Modes

Selectable Autofocus modes

On the TG-5, in order to take advantage of the camera's ability to focus at a mere 1cm from the lens to capture true super-macro images, the camera needed to be set to the dedicated Microscope Mode which forced the camera into a wider-open aperture. The resulting images had impressive magnification but there was no control over the depth-of-field and significant ambient light intrusion. With the TG-6, there is now a selectable Super Macro Focus mode available in Aperture Priority Mode. This gives the shooter complete control over the Aperture. Combined with the added ability to set a minimum shutter speed as high as 1/500sec and limit the maximum ISO, it is possible to regain control over both the depth-of-field and render clean black backgrounds free of ambient light.

Underwater White balance Setting

The TG-7 allows for even greater differentiation with depth-specific preset white balances. for shallow, mid-depth, and deep. These can be used inside the Aperture Priority mode and are helpful when shooting scenes lit purely by ambient light.

Video Perfocmance Upgrades

The 4K/30p video option can now be selected from the Quick Menu as opposed to switching the cameras Mode Dial over to Movie Mode. This combined the with the dedicated Super Macro Focus mode brings all the benefits listed above for still images to 4K video capture as well, all within the underwater-friendly Aperture Priority mode.

The Nauticam NA-TG7 Underwater Housing

Nauticam has supported the Olympus Tough series continuously since the TG-3. Despite the camera being waterproof on its own, the addition of a machined aluminum Nauticam housing transitions the TG-7 into a true underwater image-making platform. Access to essential controls is not only translated into the housing but improved with large well-placed and clearly labeled buttons and dials. The NA-TG7 is compatible with both the TG-6 and TG-7 camera models.

Integrated Bayonet Mount

The NA-TG7 comes with an integrated Bayonet Mount which will work with all previous Bayonet Mount accessories as well as the new WWL-C Wet Wide Lens for compact camera systems. The WWL-C is designed to bring true underwater-specific ultra-wide angle performance to 24mm equivalent lenses such as that found on the TG-5 and TG-6 cameras. The WWL-C in a low-profile wet-mate corrective optic that delivers 130º field-of-view with full zoom-through capability. The lens can easily be removed underwater when macro situations arise and securely stored with one of the Nauticam Bayonet Mount storage Solutions.

Accessory Mounting Options

With the Nauticam NA-TG7 there are both a cold-shoe and M10 threaded mounting point on the housing. These can be outfitted to support a variety of lighting accessories. If even more flexibility is needed, the housing ships with a set of stainless steel stiffening brackets and a shutter release extension for use with the Nauticam Flexitray II system. The addition of the tray, an Adjustable Right Handle and optional Strobe Mounting Balls (NA71311) creates an even more stable shooting platform with up to four accessory mounting locations.

NOTE: When using with NA71207 Flexitray II, the baseplate must be rotated 180º and the handles adjusted accordingly.

Flash Triggering

The NA-TG7 is able to transmit the camera's internal flash to supported external strobes via Nauticam Universal Fiber Optic Cables which plug directly into the Sea&Sea style bulkheads on the front of the housing. The included diffuser can also be attached to use the internal flash as the primary light source.

LDC Magnifier

The NA-TG6 can be outfitted with Rails (NA25123) above and below the rear LCD display window that can accommodate the LCD Magnifier with Dioptric Adjustment (NA25106). The magnifier not only functions as a shade to assist in bright shooting conditions it can magnify the screen to help judge critical focus. The magnifier features a dioptric adjustment to set the focus for your vision, even when using a prescription mask.

Attachment lens thread: Nauticam Bayonett II
Body Material: aluminum
Camera System: Compact camera
Camera manufacturer: Olympus
Pane material: Optical glass
Port shape: flat port
Strobe connector: optical Sea&Sea
Tripod connection: Thread ¼
portsystem: Fixed port
Weiterlesen
Technical data

  • Housing material aluminium

  • Nominal depth 100 m

  • Weight: 0.67 kg

  • Dimensions: 162 mm (W) × 103 mm (H) × 93 mm (D)


Scope of delivery

  • OM-System Tough TG-7 underwater housing by Nauticam

  • A pair of grip mounts with screws

  • Shutter release extension

  • Replacement silicone rubber O-ring for the housing

  • O-ring remover and O-ring grease

  • Allen key set

  • Padded case bag



Only the components of the item that are listed here will be delivered. Accessories and/or decoration shown in our images are for demonstration purposes only. In particular, we would like to point out that the purchase of an underwater housing does not include a camera and often not a port nor an external viewfinder. If you have any questions about the configuration of your system, do not hesitate to contact us.


0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.

Ball heads

on stock
M10 Strobe Mounting Ball for Housing
M10 Strobe Mounting Ball for Housing
Provides an additional ball mount for housings with available M10 threaded mount. Installation Guide: Nauticam M5 & M10 Strobe Mounting Balls from Nauticam on Vimeo.

€40.00*
on stock
Strobe mounting ball for cold shoe
Strobe mounting ball for cold shoe
Standard 1" ball mount that attaches to the cold-shoe mount of compatible housings. Specially designed metal plate prevents the ball mount from slipping off even if it becomes slightly loose.

€48.00*
Light Mounting Stem for Coldshoe
Light Mounting Stem for Coldshoe
Provides an attachment point for a YS-mount light on the housing's cold-shoe slot.

€48.00*

Trays and handles

on stock
Adjustable Right Handle for Easitray & Flexitray II
Adjustable Right Handle for Easitray & Flexitray II
An adjustable right-side handle is designed to fit the Nauticam Easitray and Nauticam Flexitray system. The right handle is shipped ready to mount to the Flexitray II and Easitray II. Included are two marine grade stainless steel screws to mount the right handle to your tray. This right side handle, as with the left side handle, is designed to accept the Nauticam base ball 1″ ball adapter. The right side handle can be adjusted for spacing both left-to-right and front-to-back. If additional length is needed, add an optional Nauticam 20mm Extension or Nauticam 30mm Extension is available.

€55.00*
on stock
Flexitray II with Left Handle
Flexitray II with Left Handle
The Nauticam Flexitray II is a very versatile and easy to use camera tray. Flexitray II W adds two 1/4-20 threaded tripod mounting holes to the popular Flexitray II. The Flexitray II W does not have the anti-rotation feature of the Flexitray II. For compact and point-and-shoot housings that have only one tripod mounting screw, please use the Flexitray II. Comparing Flexitray II (top) with Flexitray II W (bottom) Note the tripod mounting holes in the middle of the Flexitray II W. The left handle of the Flexitray II is adjustable for width (length of tray). If additional length is desired, you may add optional Nauticam 20mm extension or Nauticam 30mm extension to this tray. The handle is also adjustable front and back. This adjustment means the ability to adjust your Flexitray II for much more comfort and camera control than ordinary camera trays. The bottom side of the tray is designed to lay flat. On the top side of the tray is a rubber insert which can reduce the possibility of scratching your housing and, more importantly, increase friction between the camera housing and the tray for improved stability. The Flexitray II is supplied with 1/4 – 20 thumbscrews which fit most tripod mount threads. Thumbscrews in thread #12-24 (Ikelite housings) and 6mm thumbscrews are available. Optional T-groove plates and 1 inch ball adapters are custom designed to fit these handles. An adjustable right side handle is available that quickly mounts to this tray. With the optional Nauticam right-handle kit added the distance from handle to handle can be adjusted from 8+3/4 inch to 10+1/4 inch (center to center measurement).

€175.00*
on stock
Strobe Mounting Ball for Easitray & Flexitray
Strobe Mounting Ball for Easitray & Flexitray
A standard 1" ball mount for Easi/Flexitray handles.

€20.00*

Wide Angle

on stock
Wet Wide Lens C (WWL-C) by Nauticam
Wet Wide Lens C (WWL-C) by Nauticam
The next evolution of the WWL-1 is here!   As the versatility and capability of compact cameras increases, Nauticam has developed a smaller and lighter water contact wide angle lens tailored specifically to the compact camera user.  Designed from the ground up to match the compact camera's form factor without sacrificing optical quality, the WWL-C is a powerful addition to not only Nauticam compact housings but also, via an optional adapter, to those from other manufacturers such as the Olympus TG-6 and their PT-059 housing. Introducing Wet Wide Lens for Compact Cameras (WWL-C) With the original Wet Wide Lens, the WWL-1, Nauticam used computer aided lens design software to create an underwater-specific corrective lens that allowed for an unprecedented 130º field-of-view with full zoom-through optics and extreme close focus capabilities.  The WWL-1 wasn't just for higher end cameras that already benefitted from interchangeable lenses to attain better image quality, the WWL-1 was designed to work with a variety of cameras that featured a 28mm equivalent lens including compacts and micro-four thirds.  Delivering a stunningly sharp 130º field-of-view with 24mm equivalent lenses, the WWL-C also features zoom-through capable optics.** The WWL-C features a pre-installed metal buoyancy collar and a non-removable metal dome shade.   The WWL-C will also feature an updated quick-release Bayonet Mount.  Lenses that feature the new Bayonet Mount II will not be compatible with previous Bayonet Mount adapters but all Bayonet Mount lenses will be able to be used with the new Bayonet Mount II Bayonet Mount Adapters without modification.   In the sidebar you will find a list of anticipated housing compatibility along with the supported focal-length range as well as the necessary port configuration for the Bayonet Mount II standard. Compact Housings The WWL-C is designed around the 24mm focal length which is commonly the widest focal length for fixed-lens compact cameras.  While the WWL-1 was also able to deliver 130º field-of-view it required that the camera's lens be zoomed in slightly to 28mm.  With the WWL-C, there's no more need to zoom to avoid vignette!  This also means that more of the camera's zoom range is available.   The new NA-TG6 (17816) for the Olympus Tough TG-5 and TG-6 cameras is WWL-C ready out-of-the-box as it comes with the new Bayonet Mount II converter pre-installed.  With the TG-5 and TG-6 the WWL-C allows for use of the 25-100mm zoom range! For those compact housings with the N50 interchangeable port system, there are new short ports with Bayonet Mount II adapters pre-installed. Configurations for some of the latest models: Sony RX100 VII in the NA-RX100VII use (38705) N50 Short Port 17 with Bayonet Mount with a usable zoom range of 24-30mm Canon PowerShot G5X Mark II in the NA-G5XII use (38703) N50 Short Port 25 with Bayonet Mount with a usable zoom range of 24-50mm Panasonic Lumix DMC-LX100 II in the NA-LX100II use (38704) N50 Short Port 22 with Bayonet Mount with a usable zoom range of 24-30mm Complete configurations for all supported models can be found on the Port Chart for the WWL-C. Mirrorless M4/3 Housings The WWL-C is not just for compact cameras!  The Panasonic LUMIX G VARIO 12-32mm F3.5-5.6 ASPH. MEGA O.I.S. lens, when used with (36165) N85 Power zoom macro port 29 and the (83250) M67 to bayonet converter II allows for the use of the full 12-32mm zoom range. Mirrorless APS-C Housings Sony, Canon, Nikon and Fuji Mirrorless APS-C can all benefit from the WWL-C.  The Sony SELP1650 E PZ 16-50mm F3.5-5.6 OSS offers excellent performance from 17-50mm with only slight vignetting at 16mm.  The compact size of the WWL-C works in tandem with the low profile series of Nauticam housing for Sony's E-mount APS-C series of cameras such as the NA-A6600 and NA-A6400 to provide a travel-friendly package that doesn't compromise optical quality. Adapter for Olympus PT058/PT059 Housings Using the WWL-C with the Olympus PT058 and PT059 Housings for their Tough TG-5 and TG-6 cameras is now also an option with the (83256) Bayonet Mount Converter for Olympus PT058/059. 

€1,030.00*

Similar products

Olympus Tough! TG6 Underwater Housing by Isotta
Olympus Tough! TG6 Underwater Housing by Isotta
The housing for Olympus Tough! TG-6 allows to capitalize on the camera full potential and to capture amazing pictures underwater. Product details An easy to use, highly professional product has been created through techniques and innovations gained from years of experience. The housing for Olympus Tough! TG-6 perfect handling by means of an adjustable strips. Easy access to all key/main camera controls by means of clearly labelled laser-engraved longlasting buttons. The back door has a large window for a fine camera display view and it is entirely detached from the front body to make easier the camera fitting. ONE HAND OPEN/CLOSE It?s very fast to open and close Olympus Tough! TG-6, without any efforts by the user thanks to the side helicoid screw and the bottom centered pins. The housing stands with great stability due to sturdy and wide rubber feet located on the bottom. PORT, CLOSE-UP AND WIDE-ANGLE LENSES The housing for Olympus Tough! TG-6 ends with a tempered glass optic and features a M67 and M52 thread mount that allows the use of additional wide angle lens and macro lens. LIGHTING The Olympus Tough! TG-6 own strobe lighting is enhanced thanks to a standard diffuser placed in the provided flash window. For better performance with wide angle lenses, one or two external strobes can be connected by optic fiber bushing. CONSTRUCTION AND SAFETY Only the best materials are used to manufacture our housings such anodized aluminum which is anticorodal and thermo-coated and stainless steel. A longlasting product that requires easy and simple maintenance by the user. So small and so rich in technology! Dual high precision and quality O-Ring seals protect and ensure a perfect and secure watertight for all movable and / or removable parts; a red alarm for humidity/water inside the housing is powered by a battery replaceable by the user. Working depth is 100 metres. An hole positioned on the bottom allows to secure the housing for Olympus Tough! TG-6 with a strap. Different accessories can be fitted by means of an upper sliding tray and double threaded M6 holes and one 1/4W on the bottom. Controls ON/OFF of Olympus Tough! TG-6 Ergonomic camera focusing and shutter button for an easy use with gloves Mode button

€890.00*
on stock
Olympus Tough TG-5 TG-6 TG-7 Underwater Housing by Weefine
Olympus Tough TG-5 TG-6 TG-7 Underwater Housing by Weefine
The Weefine WFH-TG6 for the Olympus TG5/TG6/TG7 is an outstanding example of the next generation of high-end housings for compact cameras. With excellent fit and finish, rugged construction, and meticulous attention to detail, all in a user friendly sized package, this is a beautifully executed housing. Ergonomic command dials make this housing a joy to use. An easy to use, highly professional product has been created through techniques and innovations gained from years of experience. The housing for Olympus Tough! TG5/TG6 perfect handling by means of an adjustable strips. Easy access to all key/main camera controls by means of clearly labelled laser-engraved longlasting buttons. The back door has a large window for a fine camera display view and it is entirely detached from the front body to make easier the camera fitting. ONE HAND OPEN/CLOSE It?s very fast to open and close Olympus Tough! TG6/TG6, without any efforts by the user thanks to the side helicoid screw and the bottom centered pins. The housing stands with great stability due to sturdy and wide rubber feet located on the bottom. PORT, CLOSE-UP AND WIDE-ANGLE LENSES The housing for Olympus Tough! TG6/TG6 ends with a tempered glass optic and features a M52 thread mount that allows the use of additional wide angle lens and macro lens. CONSTRUCTION AND SAFETY Only the best materials are used to manufacture our housings such anodized aluminum which is anticorodal and thermo-coated and stainless steel. A longlasting product that requires easy and simple maintenance by the user. So small and so rich in technology! Dual high precision and quality O-Ring seals protect and ensure a perfect and secure watertight for all movable and / or removable parts; an alarm for humidity/water inside the housing is powered by a battery replaceable by the user. Working depth is 100 metres. An hole positioned on the bottom allows to secure the housing for Olympus Tough! TG-5/TG6 with a strap. Different accessories can be fitted by means of an upper sliding tray and double threaded NC1/4 holes on the bottom. BUILT-IN VACUUM SYSTEM Weefine Smart Housing has vacuum leak check circuitry and valve built-in. Just use the included pump to secure your housings against leaks before your dive. Vacuum system lets yuou clearly know if the housing is sealed before diving. This is important to keep yourdevices safe.

€768.00*
on stock
OM-System Tough TG-7 (M52) underwater housing by Nauticam
OM-System Tough TG-7 (M52) underwater housing by Nauticam
The OM-System Tough TG-7 is the latest in their line of IP6X rated go-anywhere compact cameras. The TG-6, which also works inside the NA-TG7 housing, was a huge hit amongst underwater photographers as it was able to capture even super-macro images without any need for diopters. The TG-7 is a clear example of Olympus' drive to create a camera that rises to meet the ever-evolving needs of the traveling compact camera user. The OM-System Tough TG-7 Camera The Olympus TG-7 shares the same 12MP BSI CMOS sensor with the TruePic VIII quad-core processor. The camera itself is IP6X rated to be waterproof up to 50ft (which is actually IPX8 spec!) as well as crushproof to 220lbf and freezeproof to 14º F and features an upgraded rear LCD screen. The feature that made the TG-5 a true macro game-changer was the 1cm minimum focus distance. For the TG-6, this feature has seen stronger implementation through the ability to use it outside of the dedicated Microscope Mode. Key Camera Specifications 12MP BSI CMOS sensor Waterproof to 50ft 4K/30p UHD Video Capture 1080/120p FHD High-speed Video Capture Selectable Underwater White Balance Modes Selectable Autofocus modes On the TG-5, in order to take advantage of the camera's ability to focus at a mere 1cm from the lens to capture true super-macro images, the camera needed to be set to the dedicated Microscope Mode which forced the camera into a wider-open aperture. The resulting images had impressive magnification but there was no control over the depth-of-field and significant ambient light intrusion. With the TG-6, there is now a selectable Super Macro Focus mode available in Aperture Priority Mode. This gives the shooter complete control over the Aperture. Combined with the added ability to set a minimum shutter speed as high as 1/500sec and limit the maximum ISO, it is possible to regain control over both the depth-of-field and render clean black backgrounds free of ambient light. Underwater White balance Setting The TG-7 allows for even greater differentiation with depth-specific preset white balances. for shallow, mid-depth, and deep. These can be used inside the Aperture Priority mode and are helpful when shooting scenes lit purely by ambient light. Video Perfocmance Upgrades The 4K/30p video option can now be selected from the Quick Menu as opposed to switching the cameras Mode Dial over to Movie Mode. This combined the with the dedicated Super Macro Focus mode brings all the benefits listed above for still images to 4K video capture as well, all within the underwater-friendly Aperture Priority mode. The Nauticam NA-TG7 Underwater Housing Nauticam has supported the Olympus Tough series continuously since the TG-3. Despite the camera being waterproof on its own, the addition of a machined aluminum Nauticam housing transitions the TG-7 into a true underwater image-making platform. Access to essential controls is not only translated into the housing but improved with large well-placed and clearly labeled buttons and dials. The NA-TG7 is compatible with both the TG-6 and TG-7 camera models. M52-Mount The NA-TG7 has the same M52 thread as the OM-System Tough TG-7 and the Olympus Tough TG-6 and 5. Accessory Mounting Options With the Nauticam NA-TG7 there are both a cold-shoe and M10 threaded mounting point on the housing. These can be outfitted to support a variety of lighting accessories. If even more flexibility is needed, the housing ships with a set of stainless steel stiffening brackets and a shutter release extension for use with the Nauticam Flexitray II system. The addition of the tray, an Adjustable Right Handle and optional Strobe Mounting Balls (NA71311) creates an even more stable shooting platform with up to four accessory mounting locations. NOTE: When using with NA71207 Flexitray II, the baseplate must be rotated 180º and the handles adjusted accordingly. Flash Triggering The NA-TG7 is able to transmit the camera's internal flash to supported external strobes via Nauticam Universal Fiber Optic Cables which plug directly into the Sea&Sea style bulkheads on the front of the housing. The included diffuser can also be attached to use the internal flash as the primary light source. LDC Magnifier The NA-TG6 can be outfitted with Rails (NA25123) above and below the rear LCD display window that can accommodate the LCD Magnifier with Dioptric Adjustment (NA25106). The magnifier not only functions as a shade to assist in bright shooting conditions it can magnify the screen to help judge critical focus. The magnifier features a dioptric adjustment to set the focus for your vision, even when using a prescription mask.

€985.00*
LCD Magnifier Attachment Rails
LCD Magnifier Attachment Rails
These rails are designed for the NA-S110/S120/TG3/G7X/G7X/G7XII/TG5/TG6 housings and allow the use of the Nauticam LCD magnifier.

€33.00*
LCD Magnifier with Dioptric Adjustment
LCD Magnifier with Dioptric Adjustment
The LCD Magnifier uses a specially designed underwater +10 achromatic optic and features a dioptric adjustment so the user can dial in the lens correction to get a very sharp view of the camera LCD. The molded rubber sunshade virtually eliminates problems seeing the LCD in bright sunlight.

€225.00*