OM System OM-1 (II) Underwater Housing by AOI

This housing is fully compatible with the OM System OM-1 Mark II Camera. The OM Systems OM-1, the first high-end Micro Four Thirds mirrorless camera from OM Digital Solutions. The OM-1 features a 20MP quad-pixel AF stacked CMOS sensor.  It is paired with the latest TruePic X processor to deliver 3x faster processing speeds and is capable of 120 fps shooting with the electronic shutter. The O-M1 can also capture 4K UHD or DCI at 60p in the OM-Log profile for great color grading range. The OM-1 camera by Olympus OM Systems has announced the OM-1. The new camera is supposed to top all previous models and have the absolute "WOW factor". Autofocus, image stabiliser and processor are said to be convincingly better. It will be available from the beginning of March. The OM-1 is to be the new MFT flagship from Olymus. With its 20MP sensor, it is said to be capable of 120 frames/s at full resolution. It also has an extremely fast image sensor. OM System promises that subject tracking and autofocus tracking will be faster and better than ever before. But there's also been a big upgrade in the image stabiliser. Key Camera Specs 20MP Stacked CMOS Sensor 1053 X-type AF points Up to 120 fps with electronic shutter Image stabilization rated to 7EV of correction (up to 8EV with compatible lenses) Large 5.76M-dot OLED electronic viewfinder Dual UHS-II SD card slots UHD or DCI 4K/60p video, 1080 up to 240 fps Weather sealing rated to IP53 Olympus OM-1 underwater housing by Nauticam The OM Systems OM-1 is characterized by its combination of extreme customizability and impressive stabilization in a compact hybrid-shooting package. The Nauticam NA-OM1, similar to the OM-1 is a refinement of it's predecessors. Nauticam has produced housings for wide range of Micro Four Thirds cameras from Olympus and Panasonic. Throughout the evolution of Micro Four Thirds cameras, Nauticam has adapted our design to help image makers get take full advantage of every camera advancement. More than a simple waterproof case, the NA-OM1 integrates with the OM-1 to adapt and improve upon the camera's features for underwater shooting. MISSION CONTROL Regardless of where a dial or button may be found on the camera body, Nauticam engineers make sure it is located where it is needed most on the housing. This Mission Control philosophy drives the design of every housing and provides for the most intuitive and easy to use housings available. The NA-OM1 features a thumb lever, easily accessed from the ergonomic rubberized right handle that actuates the AF-ON control.  This back-button autofocus method prevents the camera from refocusing between shots, allowing the user fine control over a shot's focus and is critical whether shooting macro or fast moving wide-angle subjects. FLASH TRIGGERING The OM-1 can be used with the optional Olympus FL-LM3 flash inside the NA-OM1 underwater housing by Nauticam to provide accurate TTL flash triggering through the integrated Sea&Sea style fiber optic bulkheads. For high-speed manual flash triggering, the optional Mini Flash Trigger for Olympus (26306) can be used. The trigger is powered by onboard coin style lithium batteries, with thousands of flashes available from a set. Electrical triggering of legacy wired strobe systems is possible via an electrical Nikonos style bulkhead (optional). PREIUM PROFESSIONAL OPTICS A camera system is only as good as the optics placed in front of it. Nauticam's extensive line of dome and flat ports support a wide variety of Micro Four Thirds lenses. For even higher image quality and versatility, the NA-OM1 can be used in conjunction with Nauticam's lineup of Water Contact Optics. For example, with the Olympus 14-42mm f/3.5-5.6 EZ Lens, the Nauticam WWL-1 provides a full zoom through ultra wide-angle 130º field of view. MAGNIFYING VIEWFINDERS A clear view for fine focus and composition is critical for successful underwater photography, and nothing beats a magnifying viewfinder. These viewfinders use distance, not closeup vision, and provide a large, clear view of the high resolution Olympus electronic viewfinder. Available in Angled 45º (PN 32205 or 32213) and Straight 180º (PN 32204 or 32211) formats, both viewfinders have external dioptric adjustments for dialing in perfect correction matched to the photographer’s eyesight.  The Full Frame Angle Viewfinder 32°/ 1:1 (32213) or the Full Frame Straight Viewfinder 32°/ 1:1 (32211) requires the 32215 Viewfinder Collar Adaptor. INTEGRATED VACUUM CHECK AND LEAK DETECTION SYSTEM The Nauticam Vacuum check and leak detection system is available with NA-OM1 Underwater Housing as standard equipment. Combined with an optional vacuum valve (PN 25624), this monitoring system provides constant updates on the water tight and safe-to-dive status of the housing. A simple coded LED lighting system lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur.

The housing for OM Systems OM-1 allows to capitalize on the camera full potential and to capture amazing pictures underwater. Product details An easy to use highly professional product has been created through techniques and innovations gained from years of experience. Easy access to all key/main camera controls, even with gloves, by means of clearly labelled lasered long life buttons. The back door has a large window glass for a fine camera display and optical viewfinder view and it is entirely detached from the front body to make easier the camera fitting. The housing stands with great stability due to sturdy and wide rubber feet located on the bottom. ONE HAND OPEN/CLOSE It's very easy to open and close OM Systems OM-1, without efforts by the user thanks to the upper helicoid and the bottom centered pins; the camera is placed easily into the housing on a sliding tray that keeps the camera robustly in place. PORTS AND EXTENSION RING A series of ports and extension rings are available in dedicated section. The removable port is fitted thanks to markers and a bayonet 102mm connection to the OM Systems OM-1 housing. The interchangeable port bodies and extensions rings combine to allow the use of most of lenses on the market for maximum versatility and performance.  LIGHTING Two fiber optic connections are placed in front of the built-in flash and allow the use of external strobe. CONSTRUCTION AND SAFETY Only the best materials are used to manufacture our housings such as anodized aluminum, which is anticorodal and thermo-coated, and stainless steel. A longlasting product that requires easy and simple maintenance by the user. Dual high precision and quality O-Ring seals protect and ensure a perfect and secure watertight for all movable and / or removable parts; a red alarm for humidity/water inside the housing is powered by a battery replaceable by the user. Working depth is 100 metres. Different accessories can be fitted by means of an M8 upper threaded hole, using the Isotta top handle or via the M6 and M8 threaded holes on the bottom. Controls ON/OFF of OM Systems OM-1; Own camera strobe open/close; Ergonomic camera focusing and shutter button for an easy use with gloves; Lens release; Rear control panel; Upper control panel;  All controls are available on the housing;