Canon EOS R6 Underwater Housing X-2 by INON

With Canon EOS R6 the producer has focused on the photographer's creativity, wanting to support the user in his artistic flair with a camera defined as "radical". With silent shooting at 20 fps, Dual Pixel CMOS AF II sensors and ISO 102,400 this camera promises to meet expectations even under water, allowing you to photograph moving subjects even in low-light. The image stabilizer, 20 megapixel photos and the ability to shoot 4K video, make this camera complete. Built for speed, it produces up to 240 images in RAW format. The possibility of using the double memory card certainly helps to shoot more lightly. Product details Canon EOS R6 Underwater Housing by Isotta The housing respects all the key points of Isotta's line of housings: one-handed opening, double O-ring seals for greater safety, the use of high quality materials and the made in Italy craftsmanship. The housing was created to follow the lines of the camera, resulting small and manageable, while ensuring complete control of camera functions and absolute freedom in the use of accessories. MAN BEFORE MACHINE! The focus in the study of the housing goes to the diver who decides to use it. The comfort in the use and management of the machine in water is a fixed point, studied in every detail. The handles are ergonomic, adjustable and interchangeable*. if necessary; the housing is compact and lightweight, so you won't tire your arm too much and have an excellent control over stability. All buttons are conveniently reachable from the grip position of the handles ensuring maximum management of the camera with minimum effort. The rear back offers a full view of the camera screen so that you can shoot in live view unobstructed and in comfort and it detaches completely from the front body so that it is easy to insert the camera and perform operations inside the housing. The presence of the viewfinder allows you to take pictures framing in the classic way and to replace it with a magnifier. The closing knob is Single-hand actionable. MORE AND MORE CUSTOMIZABLE! Supplied with only the connections for the optical fiber, the housing has been designed with three M16x1 connections and one M24x1 connection, for total freedom in the choice of the conformation of the equipment. When ordering, you can select your preferred lighting control system choosing between Trigger, Sincro N5 or S6 and your right port system. Through the different combinations between ports and extension rings it is possible to use most of the lenses on the market. Various accessories can be used by means of an M8 hole located at the top of the case and two M6 threaded holes located at the bottom. To make it even more unique, have your name or logo engraved. SAFETY IS IMPORTANT! The locking pins on the back are made of stainless steel and penetrate the shell for added strength and security. The housing is made of aluminum, resistant and anti-corrosion, anodized in the unmistakable red color. The classic double o-ring seal is on all moving and removable parts ensures an optimal watertight seal. The camera is held straight, centered and in place by a mounting plate with a safety catch, which slips nimbly into the housing. NNo risk of sudden infiltration. A red humidity alarm inside the case is powered by a user-replaceable battery and instantly signals an increase in humidity in a critical area. Watertightness is guaranteed up to a maximum depth of 100 meters. Highlights Ergonomic side handles, adjustable (via optional accessory) Two built-in fiber optic connectors Two standard electrical sync cord bulkheads Nikonos N5 or S6 not included Back housing completely detachable from the front housing Tray with lock for an easy fitting of the camera Single-hand closing knob for back housing Three M16x1 port for installation of accessories, e.g. vacuum valves or monitors One M24x1 port for installation of accessories, e.g. monitor Aluminum buttons and knobs and levers marked in the near with symbols identical to those of the machine in use Wide back display viewfinder glass Viewfinder Dual O-Ring seals on all buttons and removable parts Moisture sensor with LED and audible indicator (replaceable battery) Removable port - 120mm bayonet Ports security latch to prevent accidental opening Wide, rubber covered feet for solid footing M8 hole located on upper side of the housing for various accessories such as focus lights Two M6 holes located on housing bottom side for different accessories such as brackets for strobes or tripods External viewfinders can be mounted, INON compatible

The Canon EOS R5 is attractive to underwater image makers for a variety of reasons. It is a 45MP full frame mirrorless camera that shoots full width 8K video, utilizes Canon's new RF lens mount, and also has next generation Dual Pixel autofocus. The Canon EOS R6 Camera The Canon EOS R6 is one of the latest in Canon's full-frame mirrorless camera lineup which has gained unprecedented demand.  It features the RF lens mount which has the same large 54mm diameter but the ability to have larger rear lens elements that are closer to the sensor gives increased corner and outer edge sharpness.  The R6 uses an 20MP CMOS sensor which is closely related to the one used in the Canon 1D X Mark III flagship camera.  It offers in-body image stabilization rated at up to 8 stops of correction.  The camera's Dual Pixel autofocus system uses 1053 autofocus points across the entire frame.   It is also capable of recording 4K video at up to 60p and 1080 at up to 120p.   The EOS R6 can also use the large EF-mount lens lineup via three optional adapters, a simple EF to R adapter, one which supports the customizable control ring and another that features a drop-in filter mount. Key Camera Specifications 20MP full-frame Dual Pixel CMOS sensor UHD 4K shooting up to 60p, 1080 at up to 120p, 10-bit 4:2:2 internal recording in C-Log or HDR PQ 100% coverage Dual Pixel II AF system 12 fps / 20 fps burst (mechanical / electronic shutter) 3.68M-dot EVF 1.62M-dot fully-articulated rear touchscreen 10-bit HDR photos in HEIF format Dual UHS-II SD slots The Nauticam Underwater Housing for the Canon EOS R6 Camera The NA-R6 underwater housing follows suit with Nauticam's drive for innovation. Both the Canon EOS R5 and EOS R6 present shooters with the ability to use both the available legacy EF lenses via an adapter in addition to their native RF optics.  To support both the legacy and native lenses, Nauticam has integrated the NA-R6 into the N120 port system. Canon's EF to RF mount adapters can be affixed to the camera before insertion into the housing. When using the EOS R6 inside the housing with the adapter and a supported EF lens, the port and extension ring arrangement will be identical to the same setup on a Nauticam Canon N120 DSLR. As the RF lens lineup emerges, dedicated port and extension ring combinations will be listed on the Port Chart. Two lens release buttons, one for RF and one for EF lenses used with the optional Canon adapter, are located on the front of the housing to make lens removal through the port opening simple. Mission Control Nauticam engineers are obsessed with getting the underwater image maker unfettered access to all the necessary controls, with as many within easy reach of the ergonomic rubberized handles. This Mission Control philosophy extends to the NA-R6 where a dual thumb lever and dual sub-lever are placed by the right handle. The upper thumb lever activates the "AF-On" and the lower the "Q" buttons while the sub-lever corresponds to the "M-Fn" and "Record" buttons. Near the left handle is a thumb lever for "Playback" as well as a dedicated switch to change from using LCD to the EVF. Large knurled and rubberized control dials access the camera's "main" and "sub" command dials. The two-stage trigger allows for smooth focus and firing activation. Additional buttons for "Menu", "Focus Point Selection" and others are also easily reached from the handles. An additional control wheel is located on the left side of the housing and will interface with the control ring on the supported EF to EOS R Mount Adapter with Control Ring using the optional gear (NA19561). Flash Triggering Flash triggering is achieved via one of two optional Flash Triggers, a manual LED trigger (NA26301) or a TTL Flash Trigger (NA26321) that use the built-in fiber optic bulkheads with optional fiber-optic cables to trigger supported strobes. For controlling strobes that do not support fiber optic flash triggering, a variety of legacy hot-shoe flash control bulkheads are available. Integrated Vacuum Check and Leak Detection System The Nauticam vacuum check and leak detection electronics are shipped with the NA-R6 as standard equipment. Combined with an accessory vacuum valve (NA25625) this monitoring system provides constant updates on the water tight and safe-to-dive status of the housing. A simple color coded LED lighting system lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur. The Nauticam system is temperature compensated, eliminating false alarms caused by a change in outside temperature, or from a camera heating up on an action packed dive.