Bayonet Mount II Lens Holder for Arm

on stock

€85.00*

1 in stock

Delivery time: 1-3 working days*

Product number: NA83252
Available stock: 1

This adapter mounts to standard arms and provides a secure attachment point for a Bayonet Mount or Bayonet Mount II optic.

Attachment lens thread: Nauticam Bayonett II
Body Material: aluminum
Weiterlesen
Technical data

  • Material: Aluminum

Scope of delivery

Bayonet Mount II Lens Holder for arms by Nauticam


0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.
on stock
Bayonet Mount Adaptor for SMC/CMC
In order to use the CMC/SMC with the Bayonet Mount System this adapter is required. It threads onto the CMC or SMC.

€55.00*
Double Ball Arm (30cm)
300mm aluminum arm with standard 1" ball mounts on either end. The Nauticam Light Mounting System features a complete array of industry standard 1" ball mount arms, clamps, floats and accessories for attaching a variety of lighting solutions to your housing.

€65.00*
on stock
Double ball arm (40 cm)
400mm aluminum arm with standard 1" ball mounts on either end. The Nauticam Light Mounting System features a complete array of industry standard 1" ball mount arms, clamps, floats and accessories for attaching a variety of lighting solutions to your housing.

€70.00*
on stock
Wet Wide Lens C (WWL-C) by Nauticam
The next evolution of the WWL-1 is here!   As the versatility and capability of compact cameras increases, Nauticam has developed a smaller and lighter water contact wide angle lens tailored specifically to the compact camera user.  Designed from the ground up to match the compact camera's form factor without sacrificing optical quality, the WWL-C is a powerful addition to not only Nauticam compact housings but also, via an optional adapter, to those from other manufacturers such as the Olympus TG-6 and their PT-059 housing. Introducing Wet Wide Lens for Compact Cameras (WWL-C) With the original Wet Wide Lens, the WWL-1, Nauticam used computer aided lens design software to create an underwater-specific corrective lens that allowed for an unprecedented 130º field-of-view with full zoom-through optics and extreme close focus capabilities.  The WWL-1 wasn't just for higher end cameras that already benefitted from interchangeable lenses to attain better image quality, the WWL-1 was designed to work with a variety of cameras that featured a 28mm equivalent lens including compacts and micro-four thirds.  Delivering a stunningly sharp 130º field-of-view with 24mm equivalent lenses, the WWL-C also features zoom-through capable optics.** The WWL-C features a pre-installed metal buoyancy collar and a non-removable metal dome shade.   The WWL-C will also feature an updated quick-release Bayonet Mount.  Lenses that feature the new Bayonet Mount II will not be compatible with previous Bayonet Mount adapters but all Bayonet Mount lenses will be able to be used with the new Bayonet Mount II Bayonet Mount Adapters without modification.   In the sidebar you will find a list of anticipated housing compatibility along with the supported focal-length range as well as the necessary port configuration for the Bayonet Mount II standard. Compact Housings The WWL-C is designed around the 24mm focal length which is commonly the widest focal length for fixed-lens compact cameras.  While the WWL-1 was also able to deliver 130º field-of-view it required that the camera's lens be zoomed in slightly to 28mm.  With the WWL-C, there's no more need to zoom to avoid vignette!  This also means that more of the camera's zoom range is available.   The new NA-TG6 (17816) for the Olympus Tough TG-5 and TG-6 cameras is WWL-C ready out-of-the-box as it comes with the new Bayonet Mount II converter pre-installed.  With the TG-5 and TG-6 the WWL-C allows for use of the 25-100mm zoom range! For those compact housings with the N50 interchangeable port system, there are new short ports with Bayonet Mount II adapters pre-installed. Configurations for some of the latest models: Sony RX100 VII in the NA-RX100VII use (38705) N50 Short Port 17 with Bayonet Mount with a usable zoom range of 24-30mm Canon PowerShot G5X Mark II in the NA-G5XII use (38703) N50 Short Port 25 with Bayonet Mount with a usable zoom range of 24-50mm Panasonic Lumix DMC-LX100 II in the NA-LX100II use (38704) N50 Short Port 22 with Bayonet Mount with a usable zoom range of 24-30mm Complete configurations for all supported models can be found on the Port Chart for the WWL-C. Mirrorless M4/3 Housings The WWL-C is not just for compact cameras!  The Panasonic LUMIX G VARIO 12-32mm F3.5-5.6 ASPH. MEGA O.I.S. lens, when used with (36165) N85 Power zoom macro port 29 and the (83250) M67 to bayonet converter II allows for the use of the full 12-32mm zoom range. Mirrorless APS-C Housings Sony, Canon, Nikon and Fuji Mirrorless APS-C can all benefit from the WWL-C.  The Sony SELP1650 E PZ 16-50mm F3.5-5.6 OSS offers excellent performance from 17-50mm with only slight vignetting at 16mm.  The compact size of the WWL-C works in tandem with the low profile series of Nauticam housing for Sony's E-mount APS-C series of cameras such as the NA-A6600 and NA-A6400 to provide a travel-friendly package that doesn't compromise optical quality. Adapter for Olympus PT058/PT059 Housings Using the WWL-C with the Olympus PT058 and PT059 Housings for their Tough TG-5 and TG-6 cameras is now also an option with the (83256) Bayonet Mount Converter for Olympus PT058/059. 

€1,030.00*

Similar products

on stock
Double Bayonet Holder (Ø90 Float Arm)
This bayonet holder mounts securely to 90mm diameter Carbon Float arms allowing storage of wet-optics when not in use. This holds two bayonet mount items. Note: Not compatible with WWL-C

€85.00*
Bayonet II Holder for 70mm float arms by Nauticam
This adapter mounts to 70mm float arms and provides a secure attachment point for a Bayonet Mount or Bayonet Mount II optic.

€65.00*
on stock
Bayonet Holder II for 90mm Float Arm
This adapter mounts to the 90mm buoyancy arms and provides a secure attachment point for a Nauticam Bayonet mount or Bayonet mount II attachment lens.

€65.00*
on stock
Double Bayonet Holder II for 70m Float Arm by Nauticam
This adapter mounts to Nauticam 70mm float arms and provides a secure attachment point for two Bayonet Mount or Bayonet Mount II optics.

€100.00*
on stock
Double Bayonet Holder for Arms
This adapter mounts to standard arms and provides a secure attachment point for a Bayonet Mount or Bayonet Mount II optic.

€125.00*