Mounting Bracket for Monitor Housing to use with Cinema Housings

Der Atomos Shogun ist ein äußerst vielseitiges und nützliches Zubehör für die Videoproduktion, das viele wichtige Funktionen in der Content Creation Pipeline übernimmt. Shoguns Fähigkeit, 4K-Videoströme von populären Kameras wie Sony A7S und Panasonic GH4 aufzunehmen, hat die meiste Aufmerksamkeit erregt, aber das Gerät ist auch ein sehr nützlicher Monitor und Mediaplayer auf der Kamera. Der Shogun ist ein erstaunliches Gerät und verdient ein ideales Gehäuse für den Einsatz unter Wasser. Überlassen Sie es den Ingenieuren in Nauticam, ein schönes, aber absolut funktionales Gehäuse zu bauen. Das Gehäuse bietet die bestmögliche Sicht auf den großartigen 7? Shogun Monitor, während der Touchscreen-Zugang zu den wichtigsten Funktionen erhalten bleibt. Tasten in der rechten unteren Ecke des Bildschirms aktivieren die Shogun "Waveform Monitoring Functions" und "Monitor Assist Functions" Überlagerungen.  Bei aktiviertem Overlay stehen drei nützliche Überwachungsfunktionen über einen Touchscreen-Arm zur Verfügung, der von oben nach unten schwenkt und zur Aktivierung einer Funktion gedrückt wird. Nach Abschluss kann der Touchscreen-Arm vollständig aus dem Weg geräumt werden, so dass eine ungehinderte Sicht auf den Monitor gewährleistet ist.  Diese Werkzeuge zur Beurteilung von Fokus und Belichtung im Wasser sind äußerst nützlichNach Abschluss kann der Touchscreen-Arm vollständig aus dem Weg geräumt werden, so dass eine ungehinderte Sicht auf den Monitor gewährleistet ist.  Diese Werkzeuge zur Beurteilung von Fokus und Belichtung im Wasser sind äußerst nützlich und ersparen einen Großteil der Ratespiele aus einer guten Videoaufnahme. Überwachungsfunktionen, die über die Touchscreen-Schnittstelle des Nauticam-Gehäuses (AtomOS Firmware 6.2) verfügbar sind. Eine Touchscreen-Taste für die Aufnahme ist vorhanden, wird aber bei den meisten modernen Kameras nicht benötigt, wenn die Aufnahmeauslösung über HDMI erfolgt, wenn die Kamera-Aufnahmetaste gedrückt wird.  Eine Wiedergabetaste ist ebenfalls enthalten, die es ermöglicht, den letzten Clip im Wasser zu betrachten. Problemlose Installation Der Shogun wird mit drei Verriegelungen sicher im Gehäuse montiert.  Der Bildschirm ist in der Vorderseite des Gehäuses montiert, im geöffneten Zustand mit der Vorderseite nach unten.  Diese Montagestrategie ermöglicht einen einfachen Wechsel von Medien, Batterien und den Anschluss von HDMI- und SDI-Kabeln. Vakuumprüf- und Lecksuchsystem Das Nauticam Vakuumprüf- und Lecksuchsystem und das Vakuumventil sind serienmäßig im Shogun Gehäuse enthalten.  Dieses Überwachungssystem liefert ständig Updates über den wasserdichten und sicheren Zustand des Gehäuses.  Ein einfaches, codiertes LED-Beleuchtungssystem zeigt dem Benutzer an, dass das Vakuum fest ist oder dass das Gehäuse Vakuum verliert. Die Leckageerkennung ist im gleichen Stromkreis integriert, so dass bei Wassereintritt eine akustische und optische Anzeige erfolgt. Aktive Kühlung Die für die Aufnahme professioneller Videoformate erforderliche Rechenleistung ist enorm, und diese Arbeitsbelastung erzeugt Wärme.  Shogun verwendet eine Kühlschiene, um Wärme in der Luft abzuführen und um normale Betriebstemperaturen im Wasser zu gewährleisten, verwendet das Nauticam-Gehäuse zwei aktive Lüfter.  Diese Lüfter verteilen die Wärme über die Gehäuserückwand, wo sie effektiv in das Wasser übertragen werden kann. Das Kühlsystem wird von einem speziellen Sony NP-F550 Akku betrieben, der mit einer einzigen Ladung ca. 12 Stunden Betriebszeit bietet.  Eine LED-Leuchte und ein externer Schalter ermöglichen das Ein- und Ausschalten der Lüfter von der Außenseite eines abgedichteten Gehäuses.

The Nauticam Atomos Flame housing supports the Atomos Shogun Inferno and Shogun Flame, as well as the Shogun Inferno and Shogun Flame external recorders and monitors. This housing is equipped with an SDI connector. The Gehäuse provides an unobstructed view of the excellent 7"screen and provides  access to key touchscreen functions via buttons on the underside of the panel. Hassle-free installation Installing the Atomos Shogun or Ninja recorders couldn't be easier with the Nauticam Atomos Flame housing. The monitor simply slides into place and is secured with three rotating latches. The Rück side of the monitor is fully accessible, so media and battery changes are quick and easy. Built-in cooling The processing power required for recording professional video formats is enormous, and this workload generates heat. Shogun uses a cooling rail to dissipate heat in the air and to maintain normal operating temperatures in the water. Therefore, the Nauticam housing uses two active fans. These fans distribute heat across the housing wall, where it can be effectively transferred into the water. The cooling system is powered by a dedicated Sony NP-F550 battery that provides approximately 12 hours of operation on a single charge.  An LED light and external switch allow the lights to be turned on and off from the outside of a sealed enclosure. The Nauticam Atomos Flame Gehäuse supports all Sony NP-F batteries with the exception of the NP-F970 and Atomos NP-960, as they are too large for the Gehäuse.   Vacuum test and leak detection system The Nauticam Vacuum Check and Leak Detection System and Vacuum Valve come standard with the Shogun Gehäuse.  This   monitoring system provides constant updates   on the watertight and safe condition of the Gehäuse.  A simple coded LED lighting system indicates to the user that the vacuum is tight or that the Gehäuse is losing vacuum. Leak detection is integrated into the same circuit, providing an audible and visual indication when water enters.

The Nauticam Atomos Flame housing supports the Atomos Shogun Inferno and Shogun Flame as well as the Ninja Inferno and Ninja Flame external recorders and monitors.  This housing is equipped with an HDMI 2.0.   The enclosure offers an unobstructed view of the excellent 7" screen and provides access to the main touchscreen functions via buttons on the underside of the panel. Problem-free installation Installing Atomos Shogun or Ninja recorders couldn't be easier with the Nauticam Atomos Flame housing. The monitor simply slides into place and is secured with three rotating latches. The back of the monitor is fully accessible, making media and battery changes quick and easy. Built-in cooling The processing power required to record professional video formats is enormous, and this workload generates heat. Shogun uses a cooling rail to dissipate heat in the air and to ensure normal operating temperatures in the water. Therefore, the Nauticam enclosure uses two active fans. These fans distribute the heat across the back of the enclosure where it can be effectively transferred into the water. The cooling system is powered by a dedicated Sony NP-F550 battery that provides approximately 12 hours of operation on a single charge.  An LED light and external switch allow the fans to be switched on and off from the outside of a sealed enclosure. The Nauticam Atomos Flame housing supports all Sony NP-F batteries with the exception of the NP-F970 and Atomos NP-960 as they are too large for the housing.   Vacuum testing and leak detection system The Nauticam vacuum testing and leak detection system and vacuum valve are included as standard in the Shogun enclosure.  This monitoring system provides constant updates on the watertight and safe condition of the enclosure.  A simple coded LED lighting system indicates to the user that the vacuum is tight or that the enclosure is losing vacuum. Leak detection is integrated into the same circuit so that an audible and visual indication is given in the event of water Ingress.

Der Atomos Shogun ist ein äußerst vielseitiges und nützliches Zubehör für die Videoproduktion, das viele wichtige Funktionen in der Content Creation Pipeline übernimmt. Shoguns Fähigkeit, 4K-Videoströme von populären Kameras wie Sony A7S und Panasonic GH4 aufzunehmen, hat die meiste Aufmerksamkeit erregt, aber das Gerät ist auch ein sehr nützlicher Monitor und Mediaplayer auf der Kamera.

The SmallHD 503 UltraBright monitor is an incredibly compact and sharp 5-inch daylight viewable field monitor and the perfect complement to a Nauticam underwater video system. The UltraBright version adds 2200 nit daylight viewable brightness to the already stunning 5″, 1920 x 1080 Full HD Display. The 443 PPI monitor comes equipped with an amazing suite of software tools for image monitoring in a compact form factor. This version of the NA-503-H is setup for an HDMI camera connection, see NA-503-S for an HD-SDI camera connection. THE SMALLHD 503 ULTRABRIGHT MONITOR There aren’t enough good things that can be said about this screen. Pixel density (the specification that results in sharpness) now sits at 443 PPI (higher than an iPhone 11). The monitor is capable of displaying 100% of the REC 709 color space allowing for accurate judgement of color and exposure even in bright daylight conditions. The monitor feels immediately familiar, almost identical in size to your favorite smart phone. A joystick is used to effortlessly flip through video “pages”. Each page accepts multiple imagine analysis tools, configured by the user for their individual Needs. EXPOSURE TOOLS EXPOSURE ASSIST (FALSE COLOR) This overlay mode "paints" areas of the image that have reached a certain brightness value allowing the shooter to see what parts of the image may be over or underexposed. The colors used to show these luminance values can be customized as well. ZEBRA A slightly simpler version of the Exposure Assistant this tool "paints" areas of the image with a stripe pattern when they reach a pre-set brightness value allowing you to quickly see areas that may be in danger of being over or under-exposed. You can run two zebra overlays at once allowing you to monitor both highlights and shadows simultaneously. This tool does not change the underlying color of the image on the display making it a less obtrusive option than False Color overlays. WAVEFORM The waveform shows you the brightness of the image as a map, matching the screen from left to right. This tool can also be set to RGB mode in which case it monitors Chrominance (Color) as well as Luminance (Brightness). The RGB and RGB Parade modes will also help judge color balance (i.e. white balance), especially useful to underwater shooters. RGB PARADE (HISTOGRAM) This tool shows an RGB Luminance Histogram that allows for easy judgement of each channel and the overall image's exposure. FOCUS TOOLS PIXEL ZOOM Zoom in on any page by simply pushing the joystick up. This allows for accurate judgement of critical focus. FOCUS ASSIST This mode highlights the sharpest areas of the image with an assignable color. This allows for quick an accurate judgement of focus without having to zoom into the image. PEAKING This is a more subtle version of Focus Assist that does not change the underlying image as much yet still shows the outline of the sharpest parts of the image in an assignable color. NAUTICAM NA-503-H UNDERWATER HOUSING Nauticam has supported the 501, 502, and 502 Bright models of SmallHD monitors and continue to evolve and innovate with the new NA-503 for the 503 UltraBright Monitor. With more cameras offering video capability the need for an efficient and bright external monitor is only growing. With Nauticam's bulkhead system, attaching and detaching the cable system can be done quickly in the field. This means you can easily switch from a still photo setup to a video setup in between dives, quickly removing the monitor and even installing a magnifying viewfinder to the housing. The NA-503 housing provides access to all monitor controls, and the complete menu system is available in the housing, and at depth. The Nauticam NA-503 housing features the rugged build quality and advanced manufacturing expertise our user base has come to expect. The joystick navigation system used by the 503 UltraBright monitor is translated to four directional arrows, a center select button, dedicated “back/power" button, along with the "F1" and "F2" buttons underneath. The interface is simple, but elegant, and perfectly suited to the underwater environment. The SmallHD 503 UltraBright does require the addition of the SmallHD L-Series Battery Plate for 503/703 UltraBright.  The Nauticam NA-503 housing accepts up to two Sony NP-F750 batteries which provides up to 4.5 hours of run time.   HDMI and HD-SDI are both supported by a single housing, providing an extremely broad range of camera support in a single underwater monitor system. CROSS CONVERSION AND PASSTHROUGH The 503 UltraBright monitor can also function as a passthrough monitor, passing either HDMI or SDI to a surface monitor. The NA-503 housings feature a M28 opening that can accommodate another HD-SDI or HDMI cable. The SmallHD 503 UltraBright also features a cross-conversion feature meaning an HDMI input from the camera can be converted to an HD-SDI signal by the monitor and passed through a second bulkhead to a surface monitor. HD-SDI can travel over longer distances making this ideal for surface monitoring even from a camera that only features HDMI output. Nauticam HD-SDI Cable Accessories provide a reliable way of transporting a video signal over long distances. Accessory Ports 1 x M16 pre-installed with 25625 Vacuum Valve II 1x M28 pre-installed with M28 to M16 Step Down Adapter

The SmallHD 503 UltraBright monitor is an incredibly compact and sharp 5-inch daylight viewable field monitor and the perfect complement to a Nauticam underwater video system. The UltraBright version adds 2200 nit daylight viewable brightness to the already stunning 5″, 1920 x 1080 Full HD Display. The 443 PPI monitor comes equipped with an amazing suite of software tools for image monitoring in a compact form factor. This version of the NA-503-H is setup for an HDMI camera connection, see NA-503-S for an HD-SDI camera connection. THE SMALLHD 503 ULTRABRIGHT MONITOR There aren’t enough good things that can be said about this screen. Pixel density (the specification that results in sharpness) now sits at 443 PPI (higher than an iPhone 11). The monitor is capable of displaying 100% of the REC 709 color space allowing for accurate judgement of color and exposure even in bright daylight conditions. The monitor feels immediately familiar, almost identical in size to your favorite smart phone. A joystick is used to effortlessly flip through video “pages”. Each page accepts multiple imagine analysis tools, configured by the user for their individual needs. EXPOSURE TOOLS EXPOSURE ASSIST (FALSE COLOR) This overlay mode "paints" areas of the image that have reached a certain brightness value allowing the shooter to see what parts of the image may be over or underexposed. The colors used to show these luminance values can be customized as well ZEBRA A slightly simpler version of the Exposure Assistant this tool "paints" areas of the image with a stripe pattern when they reach a pre-set brightness value allowing you to quickly see areas that may be in danger of being over or under-exposed. You can run two zebra overlays at once allowing you to monitor both highlights and shadows simultaneously. This tool does not change the underlying color of the image on the display making it a less obtrusive option than False Color overlays. WAVEFORM The waveform shows you the brightness of the image as a map, matching the screen from left to right. This tool can also be set to RGB mode in which case it monitors Chrominance (Color) as well as Luminance (Brightness). The RGB and RGB Parade modes will also help judge color balance (i.e. white balance), especially useful to underwater shooters. RGB PARADE (HISTOGRAM) This tool shows an RGB Luminance Histogram that allows for easy judgement of each channel and the overall image's exposure. FOCUS TOOLS PIXEL ZOOM Zoom in on any page by simply pushing the joystick up. This allows for accurate judgement of critical focus. FOCUS ASSIST This mode highlights the sharpest areas of the image with an assignable color. This allows for quick an accurate judgement of focus without having to zoom into the image. PEAKING This is a more subtle version of Focus Assist that does not change the underlying image as much yet still shows the outline of the sharpest parts of the image in an assignable color. NAUTICAM NA-503-H UNDERWATER HOUSING Nauticam has supported the 501, 502, and 502 Bright models of SmallHD monitors and continue to evolve and innovate with the new NA-503 for the 503 UltraBright Monitor. With more cameras offering video capability the need for an efficient and bright external monitor is only growing. With Nauticam's bulkhead system, attaching and detaching the cable system can be done quickly in the field. This means you can easily switch from a still photo setup to a video setup in between dives, quickly removing the monitor and even installing a magnifying viewfinder to the housing. The NA-503 housing provides access to all monitor controls, and the complete menu system is available in the housing, and at depth. The Nauticam NA-503 housing features the rugged build quality and advanced manufacturing expertise our user base has come to expect. The joystick navigation system used by the 503 UltraBright monitor is translated to four directional arrows, a center select button, dedicated “back/power" button, along with the "F1" and "F2" buttons underneath. The interface is simple, but elegant, and perfectly suited to the underwater environment. The SmallHD 503 UltraBright does require the addition of the SmallHD L-Series Battery Plate for 503/703 UltraBright.  The Nauticam NA-503 housing accepts up to two Sony NP-F750 batteries which provides up to 4.5 hours of run time.   HDMI and HD-SDI are both supported by a single housing, providing an extremely broad range of camera support in a single underwater monitor system. CROSS CONVERSION AND PASSTHROUGH The 503 UltraBright monitor can also function as a passthrough monitor, passing either HDMI or SDI to a surface monitor. The NA-503 housings feature a M28 opening that can accommodate another HD-SDI or HDMI cable. The SmallHD 503 UltraBright also features a cross-conversion feature meaning an HDMI input from the camera can be converted to an HD-SDI signal by the monitor and passed through a second bulkhead to a surface monitor. HD-SDI can travel over longer distances making this ideal for surface monitoring even from a camera that only features HDMI output. Nauticam HD-SDI Cable Accessories provide a reliable way of transporting a video signal over long distances. Accessory Ports 1 x M16 pre-installed with 25625 Vacuum Valve II 1x M28 pre-installed with M28 to M16 Step Down Adapter

The RED Digital Cinema V-RAPTOR 8K VV is RED's latest flagship camera capable of recording REDCODE RAW in 8K resolution at up to 120 frames per second.  Combined with the Nauticam housing, it creates one of the smallest and easiest-to-use cinema systems on the market.  In addition, the Nauticam Raptor housing offers full control of the RED KOMODO through an optional camera sled.   RED Digital Cinema V-Raptor ST 8 X Cinema System The V-RAPTOR 8K camera features an 8K VV multi-format sensor with the ability to shoot 8K large format or 6K Super 35.  It has a dynamic range of more than 17 stops and can record R3D (REDCODE RAW) files directly onto CFexpress cards, eliminating the need for expensive proprietary media.  It also features Canon's new RF mount with full support for Canon's EF-to-EOS R lens adapter, so a wide range of focal lengths can be used.  The V-RAPTOR 8K VV is RED's most powerful camera to date and also one of the smallest cinema cameras available.  The feature set is clearly aimed at those who require professional specifications in a travel-friendly package, which accurately describes the majority of underwater filmmakers.   Important camera specifications: 8K VV 35,4 Megapixel CMOS Sensor (8192 x 4320) R3D files (REDCODE RAW) 17+ stops dynamic range Recording on CFexpress cards Canon RF lens mount Integrated Micro V-Lock battery interface Dual 12G SDI output Integrated 2.4" LCD screen with touch camera control Wireless control via smart phone Recording formats: REDCODE RAW 8K 8192 x 4320 at 120 fps 7K 7168 x 3780 at 140 fps 6K 6144 x 3240 at 160 fps 5K 5120 x 2700 at 192 fps 4K 4096 x 2160 at 240 fps 3K 3072 x 1620 at 320 fps 2K 2048 x 1080 at 480 fps REDCODE HQ 8K 8192 x 4320p with up to 60 fps  6K 6144 x 3240p up to 96 fps  4K 4096 x 2160p up to 240 fps  2K 2048 x 1080p up to 480 fps  REDCODE MQ 8K 8192 x 4320p up to 60 fps  6K 6144 x 3240p up to 160 fps  4K 4096 x 2160p up to 240 fps  2K 2048 x 1080p up to 480 fps  REDCODE LQ 8K 8192 x 4320p up to 120 fps  6K 6144 x 3240p up to 160 fps  4K 4096 x 2160p up to 240 fps  2K 2048 x 1080p up to 480 fps    RED Digital Cinema V-Raptor ST 8K Underwater Housing by Nauticam The enclosure supports both the RED V-RAPTOR 8K VV and the RED KOMODO through an optional insert (16250).  It has been designed in a similar way to the previous DSMC2 LT and Komodo housings to offer the most compact and travel-friendly system possible.  Raptor offers seamless integration with DSLR lenses and the same N120 connection system used in Nauticam DSLR and Cinema systems.  Enjoy unmatched user-friendly set-up and intuitive operation, including tool-free set-up and tear-down in minutes.  Batteries can be changed without removing the camera from the housing and lens changes are done in seconds.   The Nauticam Raptor housing uses the N120 Cinema Port system, which is shared with the other Nauticam cameras in the N120 platform and allows easy transition from other N120 Nauticam systems to the Nauticam Raptor. The N120 system also provides access to Nauticam's premium professional optics such as the WACP-1/2 and SMC-1/2. The housing also features adjustable handles with easy access to the cinema-style zoom and focus knobs.  On the top of the housing is a 1/4"-20 cheese plate that allows for a variety of accessory mounting points. In addition to Nauticam's traditional fully mechanical controls, the Raptor housing also features a set of backlit electronic controls.  These controls provide access to Iris+/-, Shut+/-, ISO+/-, WB on the left side of the housing and Pre-Record, FPS+/-, Playback, Play/Pause, Magnify and Tools on the top of the housing.   The Nauticam Raptor is covered by Nauticam's 2-year warranty. Lens support The RED V-RAPTOR 8K has a Canon RF lens mount, but Canon EF lenses are also supported through the Canon EF to EOS R adapter.  The Nauticam Raptor housing offers full support for Canon RF lenses along with the Canon EF to EOS R adapter and the Canon EF to EOS R adapter with variable ND filter or control ring.  On the left side of the housing is an easily accessible control wheel for smooth ND changes.  Regardless of the choice of EF or RF lens, changing lenses is quick and easy and requires no tools.  Note that when switching between RF and EF lenses, the camera must be removed from the housing to remove or install the RF-to-EF adapter.  Nauticam is constantly testing new lenses to offer optimised connection and extension combinations. Large cinema-style control wheels on the housing, within easy reach of the handles, allow precise manual focus and zoom control with the supported lenses when used with the appropriate lens kit.   The Nauticam Raptor housing, in conjunction with the 16410 N120-to-N200 port adapter, supports the use of selected cinema lenses and the associated N200 port system, as it is not limited to the use of DSLR lenses.  Installation is quick and easy and requires no tools, allowing seamless lens changes in the field - even when switching between DSLR and cinema lenses. Support for internal monitors In addition to the large viewing window for the Raptor's 2.4" LCD screen, Nauticam offers an optional rear housing for the Portkeys BM5WR monitor (16110).  This allows the monitor to be viewed by the cameraman from a natural filming position and provides an extremely slim system.  On the back of the monitor are control buttons for accessing the various tools of the BM5WR.   Support for external monitors The SmallHD 503 Ultrabright or Atomos Ninja V monitor can be mounted in the external Nauticam NA-503-S or Nauticam Atomos Ninja V-S enclosures and connected via SDI bulkheads and cables, allowing greater flexibility in positioning the monitor on the Nauticam Raptor enclosure.  SDI output Required accessories for the SDI cable system NA25058 M16 SDI-Bulkhead NA25060 SDI cable in 0.3 m length Recommended monitor housing NA17925S Nauticam NA-503-S Housing for Small HD 503 Ultrabright (SDI cable and bulkhead included) NA17922S Nauticam Atomos Ninja V-S Housing (SDI cable and bulkhead sold separately) Battery compatibility The RED V-RAPTOR 8K VV has an integrated Micro V-Lock battery interface.  Changing batteries is as easy as opening the housing, as the camera does not need to be removed to access the batteries.  The following batteries are supported in the housing: REDVOLT Micro-V 98Wh Anton Bauer Titon Micro V-Mount 45Wh/98Wh/140Wh bebob V-MICRO 45Wh/98Wh/150Wh/200Wh Core SWX NANO Micro 98Wh/147Wh Lithium-ion battery (V-mount) Fxlion NANO ONE/TWO Ultra Kompakt 50Wh/98Wh Hawk-Woods Mini V-Lok 14.4V 98Wh/150Wh Li-Ion battery IDX System Technology Imicro-150 14.5V 97Wh/145Wh Li-Ion V-Mount Battery SWIT PB-M98S 14.4V 98Wh Pocket Battery with D-Tap and USB Output (V-Mount) Ethernet remote control The Nauticam Raptor housing is designed to give the operator full control. However, it also supports an Ethernet surface feed in lengths of 5 m (Pole Cam) and 45 m (Studio). There is space in the housing to install a USB-C to Ethernet adapter, which would allow full control of the camera at the surface via the RedControl app.   Recommended Ethernet cables NA16261 Ethernet surface cable set in 45m length (incl. housing lemo bulkhead with integrated internal cable and external Duracell cables). NA16262 Replacement for enclosure Lemo Bulkhead with integrated Ethernet cable NA16263 Ethernet surface cable set in 5 m length (incl. housing Lemo Bulkhead with integrated inner cable and external Duracell cables). Vacuum control and leakage warning system The Nauticam Raptor housing features Nauticam's field-proven vacuum testing and leak detection system, which provides constant information on the housing's watertight and submersible status. By applying a light vacuum inside the housing using a reliable and compact hand pump, the system can ensure watertightness before entering the water and during the dive. A simple colour-coded LED lighting system, clearly visible on the back of the enclosure, indicates to the user if the vacuum is stable or if the enclosure is losing vacuum. Leak detection is integrated into the same circuitry so that an audible and visual signal sounds if water penetrates. The Nauticam system is temperature compensated so that false alarms due to changes in outside temperature or heating of the camera during an action-packed dive are avoided.    

The Nauticam Atomos Flame housing supports the Atomos Shogun Inferno and Shogun Flame, as well as the Ninja Inferno and Ninja Flame external recorders and monitors.  This enclosure is equipped with an M28 pass-through for HDMI 2.0 cables.   The enclosure offers an unobstructed view of the excellent 7" screen and provides access to the main touchscreen functions via buttons on the underside of the panel. Problem-free installation Installing Atomos Shogun or Ninja recorders couldn't be easier with the Nauticam Atomos Flame housing. The monitor simply slides in and is secured with three rotating latches. The back of the monitor is fully accessible, making media and battery changes quick and easy. Built-in cooling The processing power required to record professional video formats is enormous, and this workload generates heat. Shogun uses a cooling rail to dissipate heat in the air and to ensure normal operating temperatures in the water. Therefore, the Nauticam enclosure uses two active fans. These fans distribute the heat across the back of the enclosure where it can be effectively transferred into the water. The cooling system is powered by a dedicated Sony NP-F550 battery that provides approximately 12 hours of operation on a single charge.  An LED light and external switch allow the fans to be switched on and off from the outside of a sealed enclosure. The Nauticam Atomos Flame housing supports all Sony NP-F batteries with the exception of the NP-F970 and Atomos NP-960 as they are too large for the housing.   Vacuum testing and leak detection system The Nauticam vacuum testing and leak detection system and vacuum valve are included as standard in the Shogun enclosure.  This monitoring system provides constant updates on the watertight and safe condition of the enclosure.  A simple coded LED lighting system indicates to the user that the vacuum is tight or that the enclosure is losing vacuum. Leak detection is integrated into the same circuit so that an audible and visual indication is given in the event of water Ingress.

This version is suitable to accommodate the Atomos AtomX SDI module. With more cameras offering high quality HDMI video output, the Atomos Ninja V steps in, not only as a stunning monitor but also as a recorder of 4K 60p 4:2:2 10-bit video to on-board SSD drives in edit-friendly ProRes or Avid formats. The Nauticam NA-Ninja V, when used with supported housings and cameras, allows for the connection of the Ninja V over HDMI 2.0 in addition to providing easy access to the Ninja V controls underwater. Atomos Ninja V The Atomos Ninja V is an exceptional monitor, featuring a bright 1000 nit 10-bit HDR 5.2" screen that can display over 10 stops of dynamic range with compatible cameras. The monitor includes a variety of exposure and focus assist tools to insure your footage is properly exposed with critical focus. In addition to being an extremely capable monitor, the Ninja V is also a recorder. When used with compatible cameras over HDMI 2.0, the Ninja V can record 4K at 60p in 10-bit 4:2:2 ProRes or DNxHR formats to Atomos AtomX SSDmini solid state drives. With a 1TB SSDmini drive, the Ninja V can record up to 150 minutes of 4K video. EXPOSURE TOOLS  The Ninja V exposure guides include a Waveform for luminance, RGB Parade for color balance, and Vector Scope for hue and saturation. These tools, especially useful for the underwater filmmaker, allow accurate and fast judging of exposure, even in the most uncooperative lighting scenarios. Even when recording Log or HDR footage, using Rec.709 or HLG monitoring displays the video on the screen adjusted to the levels of the chosen standard.. FOCUS TOOLS Critical focus can be achieved using various peaking tools. Focus Peaking Color displays the original color image with the sharpest areas outlined in a selectable color. Focus Peaking Mono provides the same overlay but on a monochrome image. Focus Assist Outline shows only the false color outline on a black background of the sharpest areas.   THE NAUTICAM NA-NINJA V UNDERWATER HOUSING The Nauticam NA-Ninja V builds on the strong foundation Nauticam has built with previous Atomos monitor/recorder housings but is built around the new M28 large-bore bulkhead that supports HDMI 2.0. The Ninja V is easily mounted in the housing, dropping in without trays or other mounting accessories and is held in place by two rotating locking levers. The Ninja V features both an HDMI 2.0 input as well as an output and the NA-Ninja V supports both as well. With dual M28 bulkheads, a second HDMI cable can be run to another monitor. The Ninja V allows for the application of. cube format 3D LUTs to this output signal. The NA-Ninja V supports up to the NP-F970 size battery which provides up to two hours of run time. A CR-2032 battery powers the vacuum check and leak detection system. When used with the included Vacuum Valve, the system gives real-time feedback about the watertight integrity of the housing through an easily visible multi-color LED on the top of the housing. Access to the touchscreen controls of the Ninja V are handled via a series of buttons and a selector knob beneath the screen of the housing including PLAY, REC, MON, RGB, PEAK and the Muti-Selector Lever.