Installing vacuum valve to housing
Remove the plug of the M14 accessory port from the housing. Remove the cap from the vacuum valve. Tighten the vacuum valve to the housing with the tool provided.
Building up vacuum
Remove the cap of the vacuum valve. Connect the hand pump to the valve and pump several times until it reaches the target vacuum level. The LED light will turn flashing yellow while vacuum is building up, then steady green when the target vacuum level is reached.
Attention: After the target vacuum is reached, i.e. steady green light, attach the cap back to the vacuum valve.
It is recommended to leave the housing for at least 20mins to ensure it is sealed. If the LED light changes from steady green light to rapidly flashing yellow light, that means there is a leakage and please check every O-ring and conduct the vacuum test again.
Please ensure that the cap is attached back to the vacuum valve before going underwater.
Vacuum can be released by pushing the red release button.
Attention: Please DO NOT attempt to go over the designated vacuum level, i.e. stop pumping when the LED turn green. Excessive vacuum level may lead to the malfunction of the camera and lens.
Note: Although the vacuum indicator is designated to compensate for a certain amount of temperature variation, it is recommended to conduct the vacuum test in an environment where the temperature is stable.
After set up, the meaning of the LED indicator in the housing:
Flashing “Blue” light: Standby mode. The moisture alarm is active, and the system is ready for vacuum indication whenever a vacuum is detected.
Flashing “Red” light with beeping sound:Moisture is detected.
Flashing “Yellow” light: Some vacuum is detected, target vacuum level is not reached.
Steady “Green” light: Target vacuum level is reached.
Rapidly flashing “Yellow” light: Vacuum is dropping. (Will occur only after target vacuum level is reached)
Rapidly flashing “Red” light: Vacuum is totally lost. Circuit stalled until switched off. (Will occur only after target vacuum level is reached)
Ermöglicht die Verwendung sowohl eines Vakuumventils als auch eines anderen M16-Zubehörs, wie beispielsweise eines blitzauslösenden Anschlusses. Inklusive Vakuumventil II (mit Drucktastenentriegelung) und Kappe.
Entfernen Sie die M16-Anschluss vom Gehäuse. Ziehen Sie den Offset-Stecker mit Vakuumventil mit dem mitgelieferten Schraubenschlüssel am Gehäuse an. Befestigen Sie dann die M16-Anschluss wieder auf dem Offset-Stecker.
Installing vacuum valve to housing
Remove the plug of the M16 accessory port from the housing. Remove the cap from the vacuum valve. Tighten the vacuum valve to the housing with the tool provided.
Building up vacuum
Remove the cap of the vacuum valve. Connect the hand pump to the valve and pump several times until it reaches the target vacuum level. The LED light will turn flashing yellow while vacuum is building up, then steady green when the target vacuum level is reached.
Attention: After the target vacuum is reached, i.e. steady green light, attach the cap back to the vacuum valve.
It is recommended to leave the housing for at least 20mins to ensure it is sealed. If the LED light changes from steady green light to rapidly flashing yellow light, that means there is a leakage and please check every O-ring and conduct the vacuum test again.
Please ensure that the cap is attached back to the vacuum valve before going underwater.
Vacuum can be released by pushing the red release button.
Attention: Please DO NOT attempt to go over the designated vacuum level, i.e. stop pumping when the LED turn green. Excessive vacuum level may lead to the malfunction of the camera and lens.
Note: Although the vacuum indicator is designated to compensate for a certain amount of temperature variation, it is recommended to conduct the vacuum test in an environment where the temperature is stable.
After set up, the meaning of the LED indicator in the housing:
Flashing “Blue” light: Standby mode. The moisture alarm is active, and the system is ready for vacuum indication whenever a vacuum is detected.
Flashing “Red” light with beeping sound:Moisture is detected.
Flashing “Yellow” light: Some vacuum is detected, target vacuum level is not reached.
Steady “Green” light: Target vacuum level is reached.
Rapidly flashing “Yellow” light: Vacuum is dropping. (Will occur only after target vacuum level is reached)
Rapidly flashing “Red” light: Vacuum is totally lost. Circuit stalled until switched off. (Will occur only after target vacuum level is reached)
Ermöglicht die Verwendung sowohl eines Vakuumventils als auch eines anderen M14-Zubehörs, wie beispielsweise eines blitzauslösenden Anschlusses. Inklusive Vakuumventil II (mit Drucktastenentriegelung) und Kappe.
Functional cookies are absolutely necessary for the functionality of the web shop. These cookies assign a unique random ID to your browser so that your unhindered shopping experience can be guaranteed over several page views.
PayPal payments
Cookie settings:
The cookie is used to store the cookie settings of the site user over several browser sessions.
PayPal:
The cookie is used for payment processing via PayPal.
Session:
The session cookie stores your shopping data over several page views and is therefore essential for your personal shopping experience.
Information on origin:
The cookie stores the referrer and the first page visited by the user for further use.
Mollie Payment:
This cookie is used to group all events generated from a unique user session across multiple checkout pages.
CAPTCHA integration
CSRF token:
The CSRF token cookie contributes to your security. It strengthens the security of forms against unwanted hacker attacks.
Timezone:
The cookie is used to provide the system with the user's current time zone.
Cache handling:
The cookie is used to differentiate the cache for different scenarios and page users.
Activated cookies:
Saves which cookies have already been accepted by the user for the first time.
Cookies used for statistics and shop performance metrics.
Google Analytics
Google Tagmanager
Tracking cookies help the shop operator to collect and evaluate information about the behaviour of users on their website.
Google Analytics:
Google Analytics is used for traffic analysis of the website. Thereby statistics about website activities can be created and read out.
Hotjar:
Hotjar cookies are used to analyze website activities of users. The site user is identified by the cookie over several page views and his or her behavior is analyzed.
Yandex Metrica:
Yandex Metrica cookies are used for traffic analysis of the website. Statistics on website activity can be created and read.
Service cookies are used to provide the user with additional offers (e.g. live chats) on the website. Information obtained via these service cookies may also be processed for site analysis.
Tawk:
Tawk provides a live chat for site users. The cookie ensures the function of the application over several page views.
Gross / net prices setting
Marketing cookies are used to display advertisements on the website in a targeted and individualized manner across multiple page views and browser sessions.
Google AdSense:
The cookie is used by Google AdSense to promote advertising efficiency on the website.
Google conversion tracking:
The Google Conversion Tracking Cookie is used to track conversions on the website effectively. This information is used by the site operator to target Google AdWords campaigns.
Local Storage:
Stores a timestamp to hide elements for a certain time if desired.
Wishlist
This website uses cookies to ensure the best experience possible. More information...