HDMI 2.0 Cable M28A2R210-M28A1R170
Photos show accessories that are not part of your order. Only the content of the tab "What's in the box" is relevant.
Product number:
NA25079
This is the HDMI 2.0 cable required to use the NA-Ninja V housing with the NA-GH5V housing via the M28 bulkhead.
| Monitor connection: | HDMI |
|---|
Technical data
- HDMI 2.0
- for NA-GH5V housing for use with NINJA V monitor/recorder
Scope of delivery
M28A2R210-M28A1R170 HDMI 2.0 Cable by Nauticam
Login
There aren't any asked questions yet.
Panasonic Lumix GH5 (II) / GH5S Underwater housing by Nauticam
Panasonic hybrid camera systems have revolutionized all levels of motion imaging capture. Pairing high quality interchangeable lenses with compact camera bodies, the video camera of choice for underwater filmmakers has undergone an incredible transformation in recent years. It has become the Panasonic GH5 and GH5S. An exceptional hybrid housing to complement an exceptional hybrid camera, the NA-GH5V is a video-centric version of the NA-GH5 housing that supports HDMI 2.0 output via the new M28 bulkhead.
THE PANASONIC GH5 (II) AND GH5S
The Panasonic GH5 is a new camera body, positioned above the successful GH4, and improving it in every way. At the core is a 20 megapixel sensor with completely revamped video functionality. When shooting motion, GH5 reads the entire 5K sensor, then resamples in camera to create each individual 4K frame. This results in increased sharpness with no change in lens angle of coverage! Panasonic didn’t stop there, unlocking UHD video capture at up to 29.97 fps with 4:2:2 10-bit chroma sub-sampling. Simply put, this means the GH5 can capture twice the color information with 64x the precision of a 4:2:0 8-bit system. The GH5S, featuring the same body as the GH5 is even more video focused than its sibling. The GH5S features an anamorphic 10.2MP sensor featuring Dual Native ISO technology borrowed from the high end VariCam that can record DCI 4K internally at up to 30fps with 10-bit 4:2:2 color and HDR Hybrid Log Gamma support.
Panasonic GH5 Key Features
20MP Four Thirds sensor (no OLPF)
5-axis in-body image stabilization system with 'Dual IS 2' support
All 4K footage taken using full width of sensor (oversampled from 5.1K footage)
Internal 4K/30p 10-bit 4:2:2 video capture
4K/59.94p and 50p shooting with 10-bit 4:2:2 output or 8-bit, 4:2:0 internal recording
Panasonic GH5S Key Features
10MP Anamorphic sensor
Dual Native ISO of 400 and 2,500
DCI 4K 10-bit 4:2:2 at 30fps internal recording with simultaneous 10-bit 4:2:2 feed through HDMI out
1.8x crop factor vs 2.0x crop factor of GH5
Panasonic GH5 II
The updated Venus processor allows the 203.MP sensor to record full-sensor oversampled 4K 10-bit 4:2:0 video at up to 50/60p or 4:2:2 DCI 4K at 30p/25p. There is also the option to record at VFR DCI 4K/60p for smoother post-processing workflow.
Other notable improvements to the interface are the ability to resize the waveform exposure assistance tool and the ability to view the vectorscope when setting white balance. The viewfinder's refresh rate has also been increased to 120hz and the LCD is 1.5x brighter with a wider color space.
The GH5 II will also allow for simultaneous output over HDMI while recording internally at 4K/60p. The NA-GH5SV is compatible with the Nauticam HDMI2.0/1.4 system to allow for the use of supported external recorders/monitors.
THE NAUTICAM NA-GH5V UNDERWATER HOUSING
The NA-GH5V housing is small, but not at the expense of functionality or ergonomics. Integrated handles provide a sturdy and comfortable base to operate the system from. A sculpted shutter release lever, thumb lever for AE-L / AF-L, and well placed control dials provide the same operational feel as any Nauticam DSLR housing. Control buttons are placed within easy reach of the handles, with sufficient spacing to allow easy operation, even by feel. The NA-GH5 is a professional grade underwater housing, built with cutting edge manufacturing technology, supporting the pro-level GH5/GH5S camera bodies to its full potential.
The GH5/GH5S feature four custom White Balance Presets allowing the video shooter to store settings for various depths as well as natural/artificial light scenes and switch between them quickly on a dive. Access to these presets is a breeze with the NA-GH5 mission control layout. A second thumb lever on the right side of the housing, easily accessed from the handle, brings up the white balance presets. Simply scroll to the desired preset and film away.
PREMIUM PROFESSIONAL OPTICS
The variety of optics solutions for the NA-GH5 are staggering. Whether you're choosing a MFT open-source standard lens such as the Panasonic 8mm Fisheye or the ultra-fast Olympus 60mm macro lens there is an N85 port system port for you.
Looking for zoom-through capability and both macro and wide on the same dive? The WWL-1 and CMC wet-mate system allows for unmatched corner sharpness for your wide angle and ridiculous reproduction ratios for your macro. The bayonet mount system allows for switching underwater.
TTL AND MANUAL OPTICAL STROBE TRIGGERING
Add the optional Panasonic DMW-FL70 Flash inside the housing for reliable, accurate triggering of optical TTL compatible strobes. Rapid fire manual triggering is also available with the Nauticam Mini Flash Trigger.
HDMI 2.0 OUTPUT
The NA-GH5V housing is a version of the NA-GH5 housing that features the M28 bulkhead connection that supports HDMI 2.0 connections for use with the NA-NinjaV housing for the Atomos Ninja V recorder. This allows for 4K 60p 10-bit 4:2:2 output and recording. The standard NA-GH5 housing supports up to HDMI 1.4.
INTEGRATED TRIPOD MOUNTS
The NA-GH5 has integrated mounting points on the bottom for industry standard 1" ball-mounts that can be used to attach tripod legs.
Atomos Ninja V Underwater housing by Nauticam
€2,435.00*
With more cameras offering high quality HDMI video output, the Atomos Ninja V steps in, not only as a stunning monitor but also as a recorder of 4K 60p 4:2:2 10-bit video to on-board SSD drives in edit-friendly ProRes or Avid formats. The Nauticam NA-Ninja V, when used with supported housings and cameras, allows for the connection of the Ninja V over HDMI 2.0 in addition to providing easy access to the Ninja V controls underwater.
Atomos Ninja V
The Atomos Ninja V is an exceptional monitor, featuring a bright 1000 nit 10-bit HDR 5.2" screen that can display over 10 stops of dynamic range with compatible cameras. The monitor includes a variety of exposure and focus assist tools to insure your footage is properly exposed with critical focus. In addition to being an extremely capable monitor, the Ninja V is also a recorder. When used with compatible cameras over HDMI 2.0, the Ninja V can record 4K at 60p in 10-bit 4:2:2 ProRes or DNxHR formats to Atomos AtomX SSDmini solid state drives. With a 1TB SSDmini drive, the Ninja V can record up to 150 minutes of 4K video.
EXPOSURE TOOLS
The Ninja V exposure guides include a Waveform for luminance, RGB Parade for color balance, and Vector Scope for hue and saturation. These tools, especially useful for the underwater filmmaker, allow accurate and fast judging of exposure, even in the most uncooperative lighting scenarios. Even when recording Log or HDR footage, using Rec.709 or HLG monitoring displays the video on the screen adjusted to the levels of the chosen standard..
FOCUS TOOLS
Critical focus can be achieved using various peaking tools. Focus Peaking Color displays the original color image with the sharpest areas outlined in a selectable color. Focus Peaking Mono provides the same overlay but on a monochrome image. Focus Assist Outline shows only the false color outline on a black background of the sharpest Areas.
THE NAUTICAM NA-NINJA V UNDERWATER HOUSING
The Nauticam NA-Ninja V builds on the strong foundation Nauticam has built with previous Atomos monitor/recorder housings but is built around the new M28 large-bore bulkhead that supports HDMI 2.0.
The Ninja V is easily mounted in the housing, dropping in without trays or other mounting accessories and is held in place by two rotating locking levers. The Ninja V features both an HDMI 2.0 input as well as an output and the NA-Ninja V supports both as well. With dual M28 bulkheads, a second HDMI cable can be run to another monitor. The Ninja V allows for the application of. cube format 3D LUTs to this output signal.
The NA-Ninja V supports up to the NP-F970 size battery which provides up to two hours of run time. A CR-2032 battery powers the vacuum check and leak detection system. When used with the included Vacuum Valve, the system gives real-time feedback about the watertight integrity of the housing through an easily visible multi-color LED on the top of the housing.
Access to the touchscreen controls of the Ninja V are handled via a series of buttons and a selector knob beneath the screen of the housing including PLAY, REC, MON, RGB, PEAK and the Muti-Selector Lever.
Atomos Shogun/Ninja Inferno/Flame (HDMI 2.0) Underwater Housing by Nauticam
€4,435.00*
The Nauticam Atomos Flame housing supports the Atomos Shogun Inferno and Shogun Flame, as well as the Ninja Inferno and Ninja Flame external recorders and monitors. This enclosure is equipped with an M28 pass-through for HDMI 2.0 cables.
The enclosure offers an unobstructed view of the excellent 7" screen and provides access to the main touchscreen functions via buttons on the underside of the panel.
Problem-free installation
Installing Atomos Shogun or Ninja recorders couldn't be easier with the Nauticam Atomos Flame housing. The monitor simply slides in and is secured with three rotating latches. The back of the monitor is fully accessible, making media and battery changes quick and easy.
Built-in cooling
The processing power required to record professional video formats is enormous, and this workload generates heat. Shogun uses a cooling rail to dissipate heat in the air and to ensure normal operating temperatures in the water. Therefore, the Nauticam enclosure uses two active fans. These fans distribute the heat across the back of the enclosure where it can be effectively transferred into the water.
The cooling system is powered by a dedicated Sony NP-F550 battery that provides approximately 12 hours of operation on a single charge. An LED light and external switch allow the fans to be switched on and off from the outside of a sealed enclosure.
The Nauticam Atomos Flame housing supports all Sony NP-F batteries with the exception of the NP-F970 and Atomos NP-960 as they are too large for the housing.
Vacuum testing and leak detection system
The Nauticam vacuum testing and leak detection system and vacuum valve are included as standard in the Shogun enclosure. This monitoring system provides constant updates on the watertight and safe condition of the enclosure. A simple coded LED lighting system indicates to the user that the vacuum is tight or that the enclosure is losing vacuum. Leak detection is integrated into the same circuit so that an audible and visual indication is given in the event of water Ingress.
Z CAM E2-M4/S6/F6/F8 Underwater Housing by Nauticam
€5,600.00*
THE Z CAM LINEUP
The Z Cam flagship lineup is comprised of four models, the E2-F8, E2-F6, E2-S6, and the E2-M4. The Nauticam NA-E2F housing will accommodate all four models.
Key Camera Specifications:
E2-F8
8K 30fps, 6K 30fps, 4K 60fps, 10-bit color
12-Bit ProRes RAW Recording over HDMI to Atomos Ninja V
Full Frame CMOS Sensor
Dual native ISO
14 stops dynamic range
ZRAW supported
EF Mount
Gigabit Ethernet for data, control, and live preview
E2-F6
6K 60fps, 4K 120fps, 10-bit color
12-Bit ProRes RAW Recording over HDMI to Atomos Ninja V
Full Frame CMOS Sensor
15 stops dynamic range
ZRAW supported
EF Mount
Gigbit Ethernet for data, control, and live preview
E2-S6
6K 60fps, 4K 100fps, 10-bit color
12-Bit ProRes RAW Recording over HDMI to Atomos Ninja V
Super 35 CMOS Sensor
14 stops dynamic range
ZRAW supported
EF Mount
Gigabit Ethernet for data, control, and live preview
E2-M4
4K 160fps, 10-bit color
12-Bit ProRes RAW Recording over HDMI to Atomos Ninja V
4/3" WDR CMOS Sensor
13-15 stops dynamic range (16 stops with WDR enabled)
ZRAW (partial debayer)
MFT Mount
Gigabit Ethernet for data, control, and live preview
THE NAUTICAM NA-E2F HOUSING
The NA-E2F follows suit with the original NA-E2 as one of the lightest and smallest raw-capable cinema housings ever produced. Nauticam has been a leader in cinema housings with offerings for RED, ARRI, Canon, PhantomFlex, Sony and now Z Cam.
The NA-E2F uses the N120 Cinema port system, shared with Nauticam's other N120 platform cameras which allows for easy transition to the NA-E2F from other N120 Nauticam systems. The N120 system also provides access to Nauticam's line of professional premium optics such as the WACP-1/2 and SMC-1/2.
The Z Cam E2-M4 can be used with either the Z Cam EF Mount or using the native MFT mount with Metabones EF-MFT Speed Booster Ultra 0.71x Adaptor. When using the Metabones Speed Booster, the mounting position of the camera tray must be adjusted by the user.
There are 17 LANC control buttons ergonomically placed around the housing including dedicated iris+/iris-, record, focus near/focus far, eND+/eND-, and many more. 1/4"-20 size mounting threads are located on the top and bottom of the housing for easy mounting of cinema accessories.
The NA-E2F supports an ethernet surface feed in 5m (pole cam) and 45m (studio) lengths. The Z Cam E2 lineup offers a wide range of remote control options including live preview over ethernet. This opens up the option of using an ethernet to lighting adaptor, then having an iPad or iPhone on the surface to allow monitoring and full control via the Z Cam app.
The housing also features adjustable handles with cinema style zoom and focus knobs.
The E2 lineup supports Sony NP-F series batteries and the NA-E2F matches this compatibility up to and including the FP-970.
As with the NA-BMPCC2 and NA-E2, the NA-E2F allows for the internal mounting of a Samsung T-5 SSD drive as recording media making the transition from capture to edit seamless.
The Z Cam E2 lineup requires an external monitor and Nauticam produces several options for both SmallHD and Atomos monitors. To access the 12-Bit ProRes RAW Recording, you will need to use the Atomos Ninja V monitor with the Nauticam Ninja V housing. The NA-E2F features both an M28 and four M16 bulkheads supporting both HDMI 2.0 (M28) and HDMI 1.4 (M16) connections.
HDMI OUTPUT
Required accessories for HDMI 2.0 Cable System
25079 M28A2R210-M28A1R170 HDMI 2.0 Cable (for NA-GH5V/E2/E2F to use with Ninja V housing)
25088 Cable Clamp for NA-E2/E2F Housing with Screws
Required accessories for HDMI 1.4 Cable System
16243 HDMI A-D Cable in 0.5m Length for RED DSMC2/C200/EVA1/E2 (for internal connection)
25033 standard HDMI bulkhead with M16 thread
Recommended monitor housing
17922 Nauticam Atomos Ninja V Housing for Atomos Ninja V 5? Recorder/Monitor (with HDMI 2.0 support)
17920 NA-502B-H Housing for SmallHD 502 Bright Monitor (with HDMI 1.4 input support)