The Z Cam E2
The Z Cam E2 range consists of three models, the namesake E2, the E2C and the E2G.
The E2 is the true powerhouse of the range, featuring a 4/3" WDR CMOS sensor that produces 10-bit colour with up to 16 dynamic levels. C4K can be shot at up to 160 frames per second in a variety of ProRes flavours, as well as Z Cam's RAW codec ZRAW partial-debayer. An MFT lens mount means the E2 can be used with a wide range of open-source lenses from Panasonic, Olympus and Sigma.
Important camera specifications:
Micro Four Third (MFT) WDR CMOS sensor.
MFT lens mount
10-bit C4K at 160fps
ProRes 422HQ or ZRAW
The Nauticam NA-E2 Underwater Geäuse
The NA-E2 sets the standard as the lightest and smallest RAW-ready cinema underwater gear ever produced. Nauticam is a leading supplier of Cinema underwater housings with offerings for RED, ARRI, Canon, PhantomFlex, Blackmagic, Sony and now Z Cam.
The NA-E2 uses the N85 port system, which is shared with Nauticam's other MFT platform cameras, allowing easy transition to the NA-E2 from other MFT Nauticam systems. The N85 system also provides access to Nauticam's premium professional optics such as WWL-1 and CMC-1/2.
A dedicated mounting lever is located on the right side of the walker within easy reach of the adjustable ergonomic grips. 1/4"-20 mounting threads are located on the top and bottom of the walker, allowing easy mounting of cinematic accessories. The E2 supports the CMC-1/2.
The E2 supports Sony NP-F series batteries and the NA-E2 matches this compatibility up to and including the FP-970.
As with the NA-BMPCC2, the NA-E2 allows a Samsung T-5 SSD drive to be mounted internally as a recording medium, making the transition from recording to editing seamless.
The Z Cam E2 requires an external monitor and Nauticam offers several options for SmallHD and Atomos monitors. The NA-E2 has both one M28 and two M16 ports, supporting both HDMI 2.0 (M28) and HDMI 1.4 (M16) connections.
HDMI output
Required accessories for the HDMI 2.0 cable system
NA25079 M28A2R210-M28A1R170 HDMI 2.0 cable (for NA-GH5V/E2 for use with Ninja V housing)
*A special positioning cable clamp für NA25079 is required.
Required accessories for HDMI 1.4 cable system
NA16243 HDMI A-D cable in 0.5m length for RED DSMC2/C200/EVA1/E2 (for internal connection)
NA25033 standard HDMI connector with M16 thread.
(NA25033 is included in NA-058/502H/FHD5/502B-H Monitorgehüuse).
Recommended monitor housing
NA17920 NA-502B-H Housing for SmallHD 502 Bright Monitor (with HDMI 1.4 input support)
NA17922 Nauticam Atomos Ninja V Gehäuse für Atomos Ninja V 5" 4Kp60 4:2:2 10-bit Reorder/Monitor/Player (without HDMI 2.0 cable)
*With camera firmware 0.87, the maximum recording format for the Ninja V with 25079 HDMI 2.0 cable is 4K30P.
THE CANON EOS-C500 MARK II AND EOS-C300 MARK III CAMERAS
The Nauticam C500II Underwater Housing is compatible with both the Canon EOS-C500 Mark II and EOS-C300 Mark III Cameras. While each camera has its own unique specifications, there are a couple shared sticking points that underwater video shooters have to come to love with a Canon cinema camera, autofocus and white balance. "Canon Color" or Canon's unique ability to give better manual white balance results than any other camera manufacturer and Canon's Dual Pixel AF which uses two photodiodes behind each pixel to improve the camera's autofocus abilities are precisely why Canon cameras remain so popular underwater.
KEY CAMERA SPECIFICATIONS:
CANON EOS-C500 MARK II
20.8 Megapixel Full Frame CMOS Sensor, DIGIC DV 7 Processor
5.9K 60fps, 4K 60fps, 2K 120fps
Dual Pixel CMOS Autofocus
15 Stops of Dynamic Range
Internal Canon RAW Light (12-bit or 10-bit)) and XF-AVC (10-bit) Recording
Canon Log 2 and Log 3 Gamma
2x CFexpress Type B Card Slots
5-axis Electronic Image Stabilization
CANON EOS-C300 MARK III
9.6 Megapixel Super 35 Dual Gain Output (DGO) Sensor, DIGIC DV 7 Processor
4K 120fps, 2K 180fps
Dual Pixel CMOS Autofocus
16 Stops of Dynamic Range
Internal Canon RAW Light (12-bit or 10-bit) and XF-AVC (10-bit) Recording
Canon Log 2 and Log 3 Gamma
2x CFexpress Type B Card Slots
5-axis Electronic Image Stabilization
Integrated into both cameras are an in-camera Neutral Density filter which allow for 5 steps of neutral density at 2,4,6,8 and 10 stops. Both cameras also share the unique ability to record in Canon RAW Light format that captures Raw video data in files as little as 1/5 the size of standard Cinema RAW files.
THE NAUTICAM NA-C500II UNDERWATER HOUSING
Nauticam has long been producing industry-leading housings for Cinema cameras and have taken that experience to create the most advanced underwater cinema system housing available.
Taking advantage of the small form factor of the C500 Mark II and the C300 Mark III, the Nauticam NA-C500II is both ultra-portable yet offers full access to the camera's critical functions. Nauticam has taken a modular approach to the this system, similar to that of the DCS housings for RED and ARRI cameras with a wide variety of add-ons from top-handles to skids and movable trim weights.
The NA-C500II features multiple bulkhead openings for HDMI/SDI Bulkheads to support an external monitor or surface monitor feed. The housing also supports the Canon LM-V2 4.3" LCD monitor in the rear of the housing for a more streamlined approach.
The housing includes the newest version of the venerable Nauticam Cinema Skids that feature tracks along which the optional trim weights can be moved to achieve perfect trim for the shot. Mounts on the housing itself also allow for direct attachment of the trim weights to allow for either a fixed trim or for when using tripod legs instead of the skids.
The housing will accommodate the Canon BP-A30 and larger BP-A60 batteries, providing plenty of run time. As with previous Cinema System housings, the Nauticam NA-C500II features large control knobs for focus and zoom which also feature marking disks that can be removed and marked with the desired lens position or focus information.
MISSION CONTROL
Regardless of where a button or control dial may lie on the camera body, Nauticam engineers obsess over making sure that access to that control on the housing be intuitively placed for ease of use to insure no shot is missed while searching for a button or dial. To take this a step further, Nauticam has also integrated the Nauticam to Canon SDK Control Board which places a variety of electronic control functions at your finger tips.
INTEGRATED VACUUM CHECK AND LEAK DETECTION SYSTEM
The Nauticam vacuum check and leak detection system is shipped with NA-C500II as standard equipment. Also included is the M16 Vacuum Valve II, this monitoring system provides constant updates on the water tight and safe-to-dive status of the housing. A simple color coded LED lighting system lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur. The Nauticam system is temperature compensated, eliminating false alarms caused by a change in outside temperature, or from a camera heating up on an action packed dive.
PREMIUM PROFESSIONAL OPTICS
Optical performance is just as necessary as camera performance and this becomes even more critical given the challenges of filming underwater. The Nauticam NA-C500II uses the same N120 Port System as the previous NA-C200 housing which makes for a seamless transition for those upgrading to the C500 Mark II or C300 Mark III. While this system provides exceptional optical-glass and flat port solutions for a wide variety of EF-mount lenses, the real power can be realized using Nauticam's Water Contact Optics. This lineup of dry and wet lenses are conceived using commercial lens-design software to achieve truly unparalleled underwater image quality both for stills and video in both macro and wide-angle situations. The WACP-1 and WACP-2 achieve ultra-wide 130º fields-of-view with reduced distortion over conventional optics while featuring ~0" minimum focus distances, zoom through capabilities and unbeatable corner sharpness at even wide-open apertures such as F5.6. The SMC-1 and SMC-2 macro wet-optics, when used with the Canon 100mm F2.8 macro lens provide 2x and 4x magnification respectively and the SMC-1 actually provides a resulting image with increased contrast and sharpness than the 100mm lens itself can achieve in air without a magnifier.
THE Z CAM LINEUP
The Z Cam flagship lineup is comprised of four models, the E2-F8, E2-F6, E2-S6, and the E2-M4. The Nauticam NA-E2F housing will accommodate all four models.
Key Camera Specifications:
E2-F8
8K 30fps, 6K 30fps, 4K 60fps, 10-bit color
12-Bit ProRes RAW Recording over HDMI to Atomos Ninja V
Full Frame CMOS Sensor
Dual native ISO
14 stops dynamic range
ZRAW supported
EF Mount
Gigabit Ethernet for data, control, and live preview
E2-F6
6K 60fps, 4K 120fps, 10-bit color
12-Bit ProRes RAW Recording over HDMI to Atomos Ninja V
Full Frame CMOS Sensor
15 stops dynamic range
ZRAW supported
EF Mount
Gigbit Ethernet for data, control, and live preview
E2-S6
6K 60fps, 4K 100fps, 10-bit color
12-Bit ProRes RAW Recording over HDMI to Atomos Ninja V
Super 35 CMOS Sensor
14 stops dynamic range
ZRAW supported
EF Mount
Gigabit Ethernet for data, control, and live preview
E2-M4
4K 160fps, 10-bit color
12-Bit ProRes RAW Recording over HDMI to Atomos Ninja V
4/3" WDR CMOS Sensor
13-15 stops dynamic range (16 stops with WDR enabled)
ZRAW (partial debayer)
MFT Mount
Gigabit Ethernet for data, control, and live preview
THE NAUTICAM NA-E2F HOUSING
The NA-E2F follows suit with the original NA-E2 as one of the lightest and smallest raw-capable cinema housings ever produced. Nauticam has been a leader in cinema housings with offerings for RED, ARRI, Canon, PhantomFlex, Sony and now Z Cam.
The NA-E2F uses the N120 Cinema port system, shared with Nauticam's other N120 platform cameras which allows for easy transition to the NA-E2F from other N120 Nauticam systems. The N120 system also provides access to Nauticam's line of professional premium optics such as the WACP-1/2 and SMC-1/2.
The Z Cam E2-M4 can be used with either the Z Cam EF Mount or using the native MFT mount with Metabones EF-MFT Speed Booster Ultra 0.71x Adaptor. When using the Metabones Speed Booster, the mounting position of the camera tray must be adjusted by the user.
There are 17 LANC control buttons ergonomically placed around the housing including dedicated iris+/iris-, record, focus near/focus far, eND+/eND-, and many more. 1/4"-20 size mounting threads are located on the top and bottom of the housing for easy mounting of cinema accessories.
The NA-E2F supports an ethernet surface feed in 5m (pole cam) and 45m (studio) lengths. The Z Cam E2 lineup offers a wide range of remote control options including live preview over ethernet. This opens up the option of using an ethernet to lighting adaptor, then having an iPad or iPhone on the surface to allow monitoring and full control via the Z Cam app.
The housing also features adjustable handles with cinema style zoom and focus knobs.
The E2 lineup supports Sony NP-F series batteries and the NA-E2F matches this compatibility up to and including the FP-970.
As with the NA-BMPCC2 and NA-E2, the NA-E2F allows for the internal mounting of a Samsung T-5 SSD drive as recording media making the transition from capture to edit seamless.
The Z Cam E2 lineup requires an external monitor and Nauticam produces several options for both SmallHD and Atomos monitors. To access the 12-Bit ProRes RAW Recording, you will need to use the Atomos Ninja V monitor with the Nauticam Ninja V housing. The NA-E2F features both an M28 and four M16 bulkheads supporting both HDMI 2.0 (M28) and HDMI 1.4 (M16) connections.
HDMI OUTPUT
Required accessories for HDMI 2.0 Cable System
25079 M28A2R210-M28A1R170 HDMI 2.0 Cable (for NA-GH5V/E2/E2F to use with Ninja V housing)
25088 Cable Clamp for NA-E2/E2F Housing with Screws
Required accessories for HDMI 1.4 Cable System
16243 HDMI A-D Cable in 0.5m Length for RED DSMC2/C200/EVA1/E2 (for internal connection)
25033 standard HDMI bulkhead with M16 thread
Recommended monitor housing
17922 Nauticam Atomos Ninja V Housing for Atomos Ninja V 5? Recorder/Monitor (with HDMI 2.0 support)
17920 NA-502B-H Housing for SmallHD 502 Bright Monitor (with HDMI 1.4 input support)
The Z Cam E2
The Z Cam E2 range consists of three models, the namesake E2, the E2C and the E2G.
The E2 is the true powerhouse of the range, featuring a 4/3" WDR CMOS sensor that produces 10-bit colour with up to 16 dynamic levels. C4K can be shot at up to 160 frames per second in a variety of ProRes flavours, as well as Z Cam's RAW codec ZRAW partial-debayer. An MFT lens mount means the E2 can be used with a wide range of open-source lenses from Panasonic, Olympus and Sigma.
Important camera specifications:
Micro Four Third (MFT) WDR CMOS sensor.
MFT lens mount
10-bit C4K at 160fps
ProRes 422HQ or ZRAW
The Nauticam NA-E2 Underwater Geäuse
The NA-E2 sets the standard as the lightest and smallest RAW-ready cinema underwater gear ever produced. Nauticam is a leading supplier of Cinema underwater housings with offerings for RED, ARRI, Canon, PhantomFlex, Blackmagic, Sony and now Z Cam.
The NA-E2 uses the N85 port system, which is shared with Nauticam's other MFT platform cameras, allowing easy transition to the NA-E2 from other MFT Nauticam systems. The N85 system also provides access to Nauticam's premium professional optics such as WWL-1 and CMC-1/2.
A dedicated mounting lever is located on the right side of the walker within easy reach of the adjustable ergonomic grips. 1/4"-20 mounting threads are located on the top and bottom of the walker, allowing easy mounting of cinematic accessories. The E2 supports the CMC-1/2.
The E2 supports Sony NP-F series batteries and the NA-E2 matches this compatibility up to and including the FP-970.
As with the NA-BMPCC2, the NA-E2 allows a Samsung T-5 SSD drive to be mounted internally as a recording medium, making the transition from recording to editing seamless.
The Z Cam E2 requires an external monitor and Nauticam offers several options for SmallHD and Atomos monitors. The NA-E2 has both one M28 and two M16 ports, supporting both HDMI 2.0 (M28) and HDMI 1.4 (M16) connections.
HDMI output
Required accessories for the HDMI 2.0 cable system
NA25079 M28A2R210-M28A1R170 HDMI 2.0 cable (for NA-GH5V/E2 for use with Ninja V housing)
*A special positioning cable clamp für NA25079 is required.
Required accessories for HDMI 1.4 cable system
NA16243 HDMI A-D cable in 0.5m length for RED DSMC2/C200/EVA1/E2 (for internal connection)
NA25033 standard HDMI connector with M16 thread.
(NA25033 is included in NA-058/502H/FHD5/502B-H Monitorgehüuse).
Recommended monitor housing
NA17920 NA-502B-H Housing for SmallHD 502 Bright Monitor (with HDMI 1.4 input support)
NA17922 Nauticam Atomos Ninja V Gehäuse für Atomos Ninja V 5" 4Kp60 4:2:2 10-bit Reorder/Monitor/Player (without HDMI 2.0 cable)
*With camera firmware 0.87, the maximum recording format for the Ninja V with 25079 HDMI 2.0 cable is 4K30P.
THE CANON EOS-C500 MARK II AND EOS-C300 MARK III CAMERAS
The Nauticam C500II Underwater Housing is compatible with both the Canon EOS-C500 Mark II and EOS-C300 Mark III Cameras. While each camera has its own unique specifications, there are a couple shared sticking points that underwater video shooters have to come to love with a Canon cinema camera, autofocus and white balance. "Canon Color" or Canon's unique ability to give better manual white balance results than any other camera manufacturer and Canon's Dual Pixel AF which uses two photodiodes behind each pixel to improve the camera's autofocus abilities are precisely why Canon cameras remain so popular underwater.
KEY CAMERA SPECIFICATIONS:
CANON EOS-C500 MARK II
20.8 Megapixel Full Frame CMOS Sensor, DIGIC DV 7 Processor
5.9K 60fps, 4K 60fps, 2K 120fps
Dual Pixel CMOS Autofocus
15 Stops of Dynamic Range
Internal Canon RAW Light (12-bit or 10-bit)) and XF-AVC (10-bit) Recording
Canon Log 2 and Log 3 Gamma
2x CFexpress Type B Card Slots
5-axis Electronic Image Stabilization
CANON EOS-C300 MARK III
9.6 Megapixel Super 35 Dual Gain Output (DGO) Sensor, DIGIC DV 7 Processor
4K 120fps, 2K 180fps
Dual Pixel CMOS Autofocus
16 Stops of Dynamic Range
Internal Canon RAW Light (12-bit or 10-bit) and XF-AVC (10-bit) Recording
Canon Log 2 and Log 3 Gamma
2x CFexpress Type B Card Slots
5-axis Electronic Image Stabilization
Integrated into both cameras are an in-camera Neutral Density filter which allow for 5 steps of neutral density at 2,4,6,8 and 10 stops. Both cameras also share the unique ability to record in Canon RAW Light format that captures Raw video data in files as little as 1/5 the size of standard Cinema RAW files.
THE NAUTICAM NA-C500II UNDERWATER HOUSING
Nauticam has long been producing industry-leading housings for Cinema cameras and have taken that experience to create the most advanced underwater cinema system housing available.
Taking advantage of the small form factor of the C500 Mark II and the C300 Mark III, the Nauticam NA-C500II is both ultra-portable yet offers full access to the camera's critical functions. Nauticam has taken a modular approach to the this system, similar to that of the DCS housings for RED and ARRI cameras with a wide variety of add-ons from top-handles to skids and movable trim weights.
The NA-C500II features multiple bulkhead openings for HDMI/SDI Bulkheads to support an external monitor or surface monitor feed. The housing also supports the Canon LM-V2 4.3" LCD monitor in the rear of the housing for a more streamlined approach.
The housing includes the newest version of the venerable Nauticam Cinema Skids that feature tracks along which the optional trim weights can be moved to achieve perfect trim for the shot. Mounts on the housing itself also allow for direct attachment of the trim weights to allow for either a fixed trim or for when using tripod legs instead of the skids.
The housing will accommodate the Canon BP-A30 and larger BP-A60 batteries, providing plenty of run time. As with previous Cinema System housings, the Nauticam NA-C500II features large control knobs for focus and zoom which also feature marking disks that can be removed and marked with the desired lens position or focus information.
MISSION CONTROL
Regardless of where a button or control dial may lie on the camera body, Nauticam engineers obsess over making sure that access to that control on the housing be intuitively placed for ease of use to insure no shot is missed while searching for a button or dial. To take this a step further, Nauticam has also integrated the Nauticam to Canon SDK Control Board which places a variety of electronic control functions at your finger tips.
INTEGRATED VACUUM CHECK AND LEAK DETECTION SYSTEM
The Nauticam vacuum check and leak detection system is shipped with NA-C500II as standard equipment. Also included is the M16 Vacuum Valve II, this monitoring system provides constant updates on the water tight and safe-to-dive status of the housing. A simple color coded LED lighting system lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur. The Nauticam system is temperature compensated, eliminating false alarms caused by a change in outside temperature, or from a camera heating up on an action packed dive.
PREMIUM PROFESSIONAL OPTICS
Optical performance is just as necessary as camera performance and this becomes even more critical given the challenges of filming underwater. The Nauticam NA-C500II uses the same N120 Port System as the previous NA-C200 housing which makes for a seamless transition for those upgrading to the C500 Mark II or C300 Mark III. While this system provides exceptional optical-glass and flat port solutions for a wide variety of EF-mount lenses, the real power can be realized using Nauticam's Water Contact Optics. This lineup of dry and wet lenses are conceived using commercial lens-design software to achieve truly unparalleled underwater image quality both for stills and video in both macro and wide-angle situations. The WACP-1 and WACP-2 achieve ultra-wide 130º fields-of-view with reduced distortion over conventional optics while featuring ~0" minimum focus distances, zoom through capabilities and unbeatable corner sharpness at even wide-open apertures such as F5.6. The SMC-1 and SMC-2 macro wet-optics, when used with the Canon 100mm F2.8 macro lens provide 2x and 4x magnification respectively and the SMC-1 actually provides a resulting image with increased contrast and sharpness than the 100mm lens itself can achieve in air without a magnifier.
THE Z CAM LINEUP
The Z Cam flagship lineup is comprised of four models, the E2-F8, E2-F6, E2-S6, and the E2-M4. The Nauticam NA-E2F housing will accommodate all four models.
Key Camera Specifications:
E2-F8
8K 30fps, 6K 30fps, 4K 60fps, 10-bit color
12-Bit ProRes RAW Recording over HDMI to Atomos Ninja V
Full Frame CMOS Sensor
Dual native ISO
14 stops dynamic range
ZRAW supported
EF Mount
Gigabit Ethernet for data, control, and live preview
E2-F6
6K 60fps, 4K 120fps, 10-bit color
12-Bit ProRes RAW Recording over HDMI to Atomos Ninja V
Full Frame CMOS Sensor
15 stops dynamic range
ZRAW supported
EF Mount
Gigbit Ethernet for data, control, and live preview
E2-S6
6K 60fps, 4K 100fps, 10-bit color
12-Bit ProRes RAW Recording over HDMI to Atomos Ninja V
Super 35 CMOS Sensor
14 stops dynamic range
ZRAW supported
EF Mount
Gigabit Ethernet for data, control, and live preview
E2-M4
4K 160fps, 10-bit color
12-Bit ProRes RAW Recording over HDMI to Atomos Ninja V
4/3" WDR CMOS Sensor
13-15 stops dynamic range (16 stops with WDR enabled)
ZRAW (partial debayer)
MFT Mount
Gigabit Ethernet for data, control, and live preview
THE NAUTICAM NA-E2F HOUSING
The NA-E2F follows suit with the original NA-E2 as one of the lightest and smallest raw-capable cinema housings ever produced. Nauticam has been a leader in cinema housings with offerings for RED, ARRI, Canon, PhantomFlex, Sony and now Z Cam.
The NA-E2F uses the N120 Cinema port system, shared with Nauticam's other N120 platform cameras which allows for easy transition to the NA-E2F from other N120 Nauticam systems. The N120 system also provides access to Nauticam's line of professional premium optics such as the WACP-1/2 and SMC-1/2.
The Z Cam E2-M4 can be used with either the Z Cam EF Mount or using the native MFT mount with Metabones EF-MFT Speed Booster Ultra 0.71x Adaptor. When using the Metabones Speed Booster, the mounting position of the camera tray must be adjusted by the user.
There are 17 LANC control buttons ergonomically placed around the housing including dedicated iris+/iris-, record, focus near/focus far, eND+/eND-, and many more. 1/4"-20 size mounting threads are located on the top and bottom of the housing for easy mounting of cinema accessories.
The NA-E2F supports an ethernet surface feed in 5m (pole cam) and 45m (studio) lengths. The Z Cam E2 lineup offers a wide range of remote control options including live preview over ethernet. This opens up the option of using an ethernet to lighting adaptor, then having an iPad or iPhone on the surface to allow monitoring and full control via the Z Cam app.
The housing also features adjustable handles with cinema style zoom and focus knobs.
The E2 lineup supports Sony NP-F series batteries and the NA-E2F matches this compatibility up to and including the FP-970.
As with the NA-BMPCC2 and NA-E2, the NA-E2F allows for the internal mounting of a Samsung T-5 SSD drive as recording media making the transition from capture to edit seamless.
The Z Cam E2 lineup requires an external monitor and Nauticam produces several options for both SmallHD and Atomos monitors. To access the 12-Bit ProRes RAW Recording, you will need to use the Atomos Ninja V monitor with the Nauticam Ninja V housing. The NA-E2F features both an M28 and four M16 bulkheads supporting both HDMI 2.0 (M28) and HDMI 1.4 (M16) connections.
HDMI OUTPUT
Required accessories for HDMI 2.0 Cable System
25079 M28A2R210-M28A1R170 HDMI 2.0 Cable (for NA-GH5V/E2/E2F to use with Ninja V housing)
25088 Cable Clamp for NA-E2/E2F Housing with Screws
Required accessories for HDMI 1.4 Cable System
16243 HDMI A-D Cable in 0.5m Length for RED DSMC2/C200/EVA1/E2 (for internal connection)
25033 standard HDMI bulkhead with M16 thread
Recommended monitor housing
17922 Nauticam Atomos Ninja V Housing for Atomos Ninja V 5? Recorder/Monitor (with HDMI 2.0 support)
17920 NA-502B-H Housing for SmallHD 502 Bright Monitor (with HDMI 1.4 input support)
€5,600.00*
Functional cookies are absolutely necessary for the functionality of the web shop. These cookies assign a unique random ID to your browser so that your unhindered shopping experience can be guaranteed over several page views.
PayPal payments
Cookie settings:
The cookie is used to store the cookie settings of the site user over several browser sessions.
PayPal:
The cookie is used for payment processing via PayPal.
Session:
The session cookie stores your shopping data over several page views and is therefore essential for your personal shopping experience.
Information on origin:
The cookie stores the referrer and the first page visited by the user for further use.
Mollie Payment:
This cookie is used to group all events generated from a unique user session across multiple checkout pages.
CAPTCHA integration
CSRF token:
The CSRF token cookie contributes to your security. It strengthens the security of forms against unwanted hacker attacks.
Timezone:
The cookie is used to provide the system with the user's current time zone.
Cache handling:
The cookie is used to differentiate the cache for different scenarios and page users.
Activated cookies:
Saves which cookies have already been accepted by the user for the first time.
Cookies used for statistics and shop performance metrics.
Google Analytics
Google Tagmanager
Tracking cookies help the shop operator to collect and evaluate information about the behaviour of users on their website.
Google Analytics:
Google Analytics is used for traffic analysis of the website. Thereby statistics about website activities can be created and read out.
Hotjar:
Hotjar cookies are used to analyze website activities of users. The site user is identified by the cookie over several page views and his or her behavior is analyzed.
Yandex Metrica:
Yandex Metrica cookies are used for traffic analysis of the website. Statistics on website activity can be created and read.
Service cookies are used to provide the user with additional offers (e.g. live chats) on the website. Information obtained via these service cookies may also be processed for site analysis.
Tawk:
Tawk provides a live chat for site users. The cookie ensures the function of the application over several page views.
Gross / net prices setting
Marketing cookies are used to display advertisements on the website in a targeted and individualized manner across multiple page views and browser sessions.
Google AdSense:
The cookie is used by Google AdSense to promote advertising efficiency on the website.
Google conversion tracking:
The Google Conversion Tracking Cookie is used to track conversions on the website effectively. This information is used by the site operator to target Google AdWords campaigns.
Local Storage:
Stores a timestamp to hide elements for a certain time if desired.
Wishlist
This website uses cookies to ensure the best experience possible. More information...