Cable Clamp with Screws

The Z Cam E2 The Z Cam E2 range consists of three models, the namesake E2, the E2C and the E2G.   The E2 is the true powerhouse of the range, featuring a 4/3" WDR CMOS sensor that produces 10-bit colour with up to 16 dynamic levels. C4K can be shot at up to 160 frames per second in a variety of ProRes flavours, as well as Z Cam's RAW codec ZRAW partial-debayer. An MFT lens mount means the E2 can be used with a wide range of open-source lenses from Panasonic, Olympus and Sigma.   Important camera specifications: Micro Four Third (MFT) WDR CMOS sensor. MFT lens mount 10-bit C4K at 160fps ProRes 422HQ or ZRAW The Nauticam NA-E2 Underwater Geäuse The NA-E2 sets the standard as the lightest and smallest RAW-ready cinema underwater gear ever produced. Nauticam is a leading supplier of Cinema underwater housings with offerings for RED, ARRI, Canon, PhantomFlex, Blackmagic, Sony and now Z Cam. The NA-E2 uses the N85 port system, which is shared with Nauticam's other MFT platform cameras, allowing easy  transition to the NA-E2 from other MFT Nauticam systems. The N85 system also provides access to Nauticam's premium professional optics such as WWL-1 and CMC-1/2. A dedicated mounting lever is located on the right side of the walker within easy reach of the adjustable ergonomic grips. 1/4"-20 mounting threads are located on the top and bottom of the walker, allowing easy mounting of cinematic accessories. The E2 supports the CMC-1/2. The E2 supports Sony NP-F series batteries and the NA-E2 matches this compatibility up to and including the FP-970. As with the NA-BMPCC2, the NA-E2 allows a Samsung T-5 SSD drive to be mounted internally as a recording medium, making the transition from recording to editing seamless.   The Z Cam E2 requires an external monitor and Nauticam offers several options for SmallHD and Atomos monitors. The NA-E2 has both one M28 and two M16 ports, supporting both HDMI 2.0 (M28) and HDMI 1.4 (M16) connections. HDMI output Required accessories for the HDMI 2.0 cable system NA25079 M28A2R210-M28A1R170 HDMI 2.0 cable (for NA-GH5V/E2 for use with Ninja V housing) *A special positioning cable clamp für NA25079 is required. Required accessories for HDMI 1.4 cable system NA16243 HDMI A-D cable in 0.5m length for RED DSMC2/C200/EVA1/E2 (for internal connection) NA25033 standard HDMI connector with M16 thread. (NA25033 is included in NA-058/502H/FHD5/502B-H Monitorgehüuse). Recommended monitor housing NA17920 NA-502B-H Housing for SmallHD 502 Bright Monitor (with HDMI 1.4 input support) NA17922 Nauticam Atomos Ninja V Gehäuse für Atomos Ninja V 5" 4Kp60 4:2:2 10-bit Reorder/Monitor/Player (without HDMI 2.0 cable) *With camera firmware 0.87, the maximum recording format for the Ninja V with 25079 HDMI 2.0 cable is 4K30P.

THE Z CAM LINEUP The Z Cam flagship lineup is comprised of four models, the E2-F8, E2-F6, E2-S6, and the E2-M4.  The Nauticam NA-E2F housing will accommodate all four models.   Key Camera Specifications: E2-F8 8K 30fps, 6K 30fps, 4K 60fps, 10-bit color 12-Bit ProRes RAW Recording over HDMI to Atomos Ninja V Full Frame CMOS Sensor Dual native ISO 14 stops dynamic range ZRAW supported EF Mount Gigabit Ethernet for data, control, and live preview E2-F6 6K 60fps, 4K 120fps, 10-bit color 12-Bit ProRes RAW Recording over HDMI to Atomos Ninja V Full Frame CMOS Sensor 15 stops dynamic range ZRAW supported EF Mount Gigbit Ethernet for data, control, and live preview E2-S6 6K 60fps, 4K 100fps, 10-bit color 12-Bit ProRes RAW Recording over HDMI to Atomos Ninja V Super 35 CMOS Sensor 14 stops dynamic range ZRAW supported EF Mount Gigabit Ethernet for data, control, and live preview E2-M4 4K 160fps, 10-bit color 12-Bit ProRes RAW Recording over HDMI to Atomos Ninja V 4/3" WDR CMOS Sensor 13-15 stops dynamic range (16 stops with WDR enabled) ZRAW (partial debayer) MFT Mount Gigabit Ethernet for data, control, and live preview THE NAUTICAM NA-E2F HOUSING The NA-E2F follows suit with the original NA-E2 as one of the lightest and smallest raw-capable cinema housings ever produced. Nauticam has been a leader in cinema housings with offerings for RED, ARRI, Canon, PhantomFlex, Sony and now Z Cam. The NA-E2F uses the N120 Cinema port system, shared with Nauticam's other N120 platform cameras which allows for easy transition to the NA-E2F from other N120 Nauticam systems. The N120 system also provides access to Nauticam's line of professional premium optics such as the WACP-1/2 and SMC-1/2. The Z Cam E2-M4 can be used with either the Z Cam EF Mount or using the native MFT mount with Metabones EF-MFT Speed Booster Ultra 0.71x Adaptor.  When using the Metabones Speed Booster, the mounting position of the camera tray must be adjusted by the user.   There are 17 LANC control buttons ergonomically placed around the housing including dedicated iris+/iris-, record, focus near/focus far, eND+/eND-, and many more.  1/4"-20 size mounting threads are located on the top and bottom of the housing for easy mounting of cinema accessories. The NA-E2F supports an ethernet surface feed in 5m (pole cam) and 45m (studio) lengths.  The Z Cam E2 lineup offers a wide range of remote control options including live preview over ethernet.  This opens up the option of using an ethernet to lighting adaptor, then having an iPad or iPhone on the surface to allow monitoring and full control via the Z Cam app.   The housing also features adjustable handles with cinema style zoom and focus knobs.   The E2 lineup supports Sony NP-F series batteries and the NA-E2F matches this compatibility up to and including the FP-970. As with the NA-BMPCC2 and NA-E2, the NA-E2F allows for the internal mounting of a Samsung T-5 SSD drive as recording media making the transition from capture to edit seamless. The Z Cam E2 lineup requires an external monitor and Nauticam produces several options for both SmallHD and Atomos monitors.  To access the 12-Bit ProRes RAW Recording, you will need to use the Atomos Ninja V monitor with the Nauticam Ninja V housing. The NA-E2F features both an M28 and four M16 bulkheads supporting both HDMI 2.0 (M28) and HDMI 1.4 (M16) connections. HDMI OUTPUT Required accessories for HDMI 2.0 Cable System 25079 M28A2R210-M28A1R170 HDMI 2.0 Cable (for NA-GH5V/E2/E2F to use with Ninja V housing) 25088 Cable Clamp for NA-E2/E2F Housing with Screws Required accessories for HDMI 1.4 Cable System 16243 HDMI A-D Cable in 0.5m Length for RED DSMC2/C200/EVA1/E2 (for internal connection) 25033 standard HDMI bulkhead with M16 thread Recommended monitor housing 17922 Nauticam Atomos Ninja V Housing for Atomos Ninja V 5? Recorder/Monitor (with HDMI 2.0 support) 17920 NA-502B-H Housing for SmallHD 502 Bright Monitor (with HDMI 1.4 input support)