Canon PowerShot G7XIII ProPackage by Nauticam

The next evolution of the WWL-1 is here!   As the versatility and capability of compact cameras increases, Nauticam has developed a smaller and lighter water contact wide angle lens tailored specifically to the compact camera user.  Designed from the ground up to match the compact camera's form factor without sacrificing optical quality, the WWL-C is a powerful addition to not only Nauticam compact housings but also, via an optional adapter, to those from other manufacturers such as the Olympus TG-6 and their PT-059 housing. Introducing Wet Wide Lens for Compact Cameras (WWL-C) With the original Wet Wide Lens, the WWL-1, Nauticam used computer aided lens design software to create an underwater-specific corrective lens that allowed for an unprecedented 130º field-of-view with full zoom-through optics and extreme close focus capabilities.  The WWL-1 wasn't just for higher end cameras that already benefitted from interchangeable lenses to attain better image quality, the WWL-1 was designed to work with a variety of cameras that featured a 28mm equivalent lens including compacts and micro-four thirds.  Delivering a stunningly sharp 130º field-of-view with 24mm equivalent lenses, the WWL-C also features zoom-through capable optics.** The WWL-C features a pre-installed metal buoyancy collar and a non-removable metal dome shade.   The WWL-C will also feature an updated quick-release Bayonet Mount.  Lenses that feature the new Bayonet Mount II will not be compatible with previous Bayonet Mount adapters but all Bayonet Mount lenses will be able to be used with the new Bayonet Mount II Bayonet Mount Adapters without modification.   In the sidebar you will find a list of anticipated housing compatibility along with the supported focal-length range as well as the necessary port configuration for the Bayonet Mount II standard. Compact Housings The WWL-C is designed around the 24mm focal length which is commonly the widest focal length for fixed-lens compact cameras.  While the WWL-1 was also able to deliver 130º field-of-view it required that the camera's lens be zoomed in slightly to 28mm.  With the WWL-C, there's no more need to zoom to avoid vignette!  This also means that more of the camera's zoom range is available.   The new NA-TG6 (17816) for the Olympus Tough TG-5 and TG-6 cameras is WWL-C ready out-of-the-box as it comes with the new Bayonet Mount II converter pre-installed.  With the TG-5 and TG-6 the WWL-C allows for use of the 25-100mm zoom range! For those compact housings with the N50 interchangeable port system, there are new short ports with Bayonet Mount II adapters pre-installed. Configurations for some of the latest models: Sony RX100 VII in the NA-RX100VII use (38705) N50 Short Port 17 with Bayonet Mount with a usable zoom range of 24-30mm Canon PowerShot G5X Mark II in the NA-G5XII use (38703) N50 Short Port 25 with Bayonet Mount with a usable zoom range of 24-50mm Panasonic Lumix DMC-LX100 II in the NA-LX100II use (38704) N50 Short Port 22 with Bayonet Mount with a usable zoom range of 24-30mm Complete configurations for all supported models can be found on the Port Chart for the WWL-C. Mirrorless M4/3 Housings The WWL-C is not just for compact cameras!  The Panasonic LUMIX G VARIO 12-32mm F3.5-5.6 ASPH. MEGA O.I.S. lens, when used with (36165) N85 Power zoom macro port 29 and the (83250) M67 to bayonet converter II allows for the use of the full 12-32mm zoom range. Mirrorless APS-C Housings Sony, Canon, Nikon and Fuji Mirrorless APS-C can all benefit from the WWL-C.  The Sony SELP1650 E PZ 16-50mm F3.5-5.6 OSS offers excellent performance from 17-50mm with only slight vignetting at 16mm.  The compact size of the WWL-C works in tandem with the low profile series of Nauticam housing for Sony's E-mount APS-C series of cameras such as the NA-A6600 and NA-A6400 to provide a travel-friendly package that doesn't compromise optical quality. Adapter for Olympus PT058/PT059 Housings Using the WWL-C with the Olympus PT058 and PT059 Housings for their Tough TG-5 and TG-6 cameras is now also an option with the (83256) Bayonet Mount Converter for Olympus PT058/059. 

This N50 Flat Port features an integrated Bayonet Mount.

This 3.5 inch wide angle dome port is part of the N50 port system and features an acrylic element, anodized aluminum construction and an integrated aluminum port bezel. Designed for fixed-lens compact cameras, this dome port restores the camera's lens field of view in mid-air. Various sized ports are available to support a variety of lenses and housing types. Port extensions or adapters may be required for some ports and housings.

The Weefine WFL01 Ultra Wide Angle Interchangeable Lens is designed for use on cameras with lenses up to 24mm focal length (35mm & equivalent) without noticeable vignetting. With this interchangeable lens you can reach almost 145 degrees. With a 67 mm thread that fits over the opening of the housing and can be installed and removed during the dive. The lens consists of 4 high quality low dispersion optical glasses and a hard coated polycarbonate dome to correct unwanted aberrations. All glass lenses have a broadband anti-reflective coating (BBAR). Compared to a standard fisheye lens, the Weefine WFL-01 extends the hyperfocal distance and facilitates the capture of immersive close-focus wide-angle images. With 24mm lenses (35mm & equivalent) with corner-to-corner focus, wide-angle shots of up to 145 degrees are possible. Perfect for capturing seascapes, divers, shipwrecks and schools of fish without having to move further away from the subject, while still taking full advantage of water clarity and artificial light sources. Can be mounted to ports with 67 mm thread or to other ports using an Adapter. Key features: Enlargement 0.53x Corrosion-resistant Aluminium Dome made of optically high-quality polycarbonate Optical glass lenses with multi-layer BBAR coating Depth up to 60 m Supplied with carrying case, neoprene protector and Rück cover

Zen O-ring for sealing WWL-1 on M67 flat ports A single O-ring to seal the space between the Nauticam WWL-1 and M67 threaded flat port. This allows trapped water for splits, split-shots or half-half shots. Can be used in combination with the WWL-1, WWL-1B and WWL-C. 

The CMC is an extremely powerful super-macro accessory lens optimized for use with both fixed-lens compact, mirrorless interchangeable lens, and DSLR cameras. Part of Nauticam's in-house lineup of wet and dry optics, these accessory lenses are purpose built and rigorously tested to outperform any other optics on the market. Introducing CMC-1 Smaler, lighter, stronger While the Nauticam Super Macro Converter (SMC) design inspired the development of the Compact Macro Converter, the CMC is actually more powerful. The CMC provides more magnification than the SMC with all compatible compact camera systems for which it was designed. As expected, the CMC provides more magnification than any compact camera tested can achieve on its own, and does so with improved working distance. This combination makes CMC ideal for tiny, skittish subjects. Using the popular RX100V as an example, the CMC-1 results in a magnification of 2.3X the smallest subject the camera is capable of photographing with no accessory lens (34.5mm v 80mm), and it does so with 1.4X the working distance (56mm v 80mm). Results with the Canon G7X are even more stunning, providing 3.0X magnification at approximately 2.4X the working distance. To achieve the same image sizes with sealed magnifying lenses a +15 Diopter or stronger would be required, but no +15 Diopter lens can match the overall image quality of CMC-1. This is achieved while maintaining the smallest size and weight possible. Breakthroug Lens Design Prior to the development of the Nauticam accessory macro conversion lenses, achieving super macro underwater meant using tools that were designed for in-air use. These tools simply do not take into account the physics of shooting through water. Thanks to Edward Lai, Managing Director of Nauticam, the CMC-1 takes a radically different approach: hundreds of engineering hours utilizing computer software to model a lens that complements an entire system – camera, lens, port, air, and water – as a whole. This accounts for the critical air-water interfaces in a conversion lens design to achieve the best image quality possible. The improvements are stunning, measurable and a new standard in underwater macro imaging. Uncompromised optical Quality The CMC-1 is constructed from lenses precision crafted of specially formulated low-dispersion optical-grade glass, ground to the most demanding standards. This means greater sharpness and contrast on every shot and extraordinary resolution rivaling a macro lens used in air. Broadband anti-refective coatings effectively reduce common optical issues such as chromatic aberrations, coma, spherical aberration, and field deformation associated with underwater macro photography using traditional magnifying lenses. This means superior light transmission, accurate color and no distortion or vignetting in the most demanding situations. These exceptional optics are assembled in a rugged hard anodized aluminum housing, and nitrogen purged during assembly to eliminate fogging. The CMC-1 is compatible with a variety of camera systems, but the most impressive increase in magnification comes when paired with the Olympus M.ZUIKO DIGITAL ED 60mm f/2.8 Macro Lens for M43 Systems. This combination achieves a 2:1 reproduction ratio. This translates into an image 8.5mm X 6.3MM, and one of the most powerful macro imaging systems available. Optimized for Autofocus By utilizing a specially developed algorithm in the optimization process, the CMC-1 renders superior image quality over the full focusing range of the camera lens. This, combined with the high brightness and contrast of the image, allows the autofocus system of the camera to work well – often better than less powerful close focus lenses. Just as important are the out-of-focus (Bokeh) portions of the image that exhibit the same creamy smooth quality that photographers appreciate when shooting macro in air – all without color fringing common to traditional magnifying lenses. Avoiding Diffraction Due to the overall superior optical performance and precision focus of the CMC-1 it is possible to shoot larger apertures with excellent image quality. This avoids reaching the diffraction limit of high resolution sensors, and allows selective focus effects with narrow depth of field in super macro images. Also compatible with Nikon AF-S 60mm Macro While designed with compact cameras in mind, compatibility with larger formats has proven to be possible in some cases. Nikon AF-S 60mm Macro (not compatible with the earlier SMC-1) provides 1.5 : 1 Reproduction Ratio when with combined CMC-1. This combination is extremely versatile, covering fish portraits, 1:1 macro, and now 1.5:1 super macro on the same dive. Mounting and Using the CMC-1 The CMC-1 ships with the common 67mm threaded lens mount. The CMC-1 has a protruding rear lens element, designed to place the accessory optic as close to the camera lens port as is possible, providing the best overall image quality when used with flip lens adapters. A flush mount adapter ring is used when attaching CMC-1 directly to an underwater housing, and is included with the lens. Flip lens holders, available to suit most Nauticam housings and lens ports, provide the fastest and most convenient lens mount possible. The lens is always threaded in place, and available to be flipped down as needed.

In order to use the CMC/SMC with the Bayonet Mount System this adapter is required. It threads onto the CMC or SMC.

INTRODUCING CMC-2 The CMC-1 became the benchmark other lenses are measured against with extremely high magnification and overall sharpness. The CMC-2 is a follow-up designed to give photographers using compact systems more magnification choices without sacrificing quality. New underwater photographers, or new system owners, will appreciate an easier-to-use lens with more accurate autofocus performance than stronger lenses can offer. More experienced users will find that CMC-2 is an ideal companion to CMC-1, allowing the perfect lens to be selected based on the subject size. IMPROVED SHARPNESS During pre-production testing we noticed a stunning increase in overall image sharpness when comparing shots taken with CMC-2 to those behind a flat port with no accessory lens whatsoever. It became clear that with both compact cameras at full telephoto and mirrorless interchangeable lens systems the conversion lens markedly improved overall sharpness. This is counterintuitive, as conventional wisdom implies that any conversion lens reduces image quality. In this case, the flat port degrades overall sharpness, and the optical correction offered by the CMC-2 restores it. Simply put – an image taken underwater with CMC-2 is sharper than the same image taken with no accessory lens mounted. These are true water-contact corrective optics! BREAKTHROUGH LENS DESIGN Prior to the development of the Nauticam accessory macro conversion lenses, achieving "super macro" underwater meant using tools that were designed for in-air use. These tools simply do not take into account the physics of shooting in water. Thanks to Edward Lai, Managing Director of Nauticam, the CMC-2 takes a radically different approach: hundreds of engineering hours utilizing computer software to model an accessory lens that complements an entire system – camera, lens, port, air, and water – as a whole. This accounts for the critical air-water interfaces in a conversion lens design to achieve the best image quality possible. The improvements are stunning, measurable and a new standard in underwater macro imaging. UNCOMPROMISING OPTICAL QUALITY The CMC-2, like all Nauticam Macro Converters, is constructed from lenses precision crafted of specially formulated low dispersion optical grade glass, ground to the most demanding standards. This means greater sharpness and contrast on every shot and extraordinary resolution rivaling a macro lens used in air. Broadband anti-reflective coatings effectively reduce common optical issues such as chromatic aberrations, coma, spherical aberration, and field deformation associated with underwater macro photography using traditional magnifying lenses. This means superior light transmission, accurate color and no distortion and vignetting in the most demanding situations. These exceptional optics are assembled in a rugged hard anodized aluminum housing, and nitrogen purged during assembly to eliminate fogging. STUNNING MAGNIFICATION The CMC-2 is the less powerful of the two Nauticam Macro Converters designed for compact cameras, but magnification when compared to the capabilities of these cameras with no accessory lens is still very impressive. As an example, the popular Sony RX100V can capture an image area 160mm (6.3 in.) wide at its full telephoto zoom position at its minimum focus distance. With the addition of CMC-2, that image area is reduced to 55mm (2.2 in) wide. CMC-1 brings the minimum focus distance even closer, allowing a captured frame 36mm (1.4 in) wide. OPTIMIZED FOR AUTOFOCUS By utilizing a specially developed algorithm in the lens design process, the CMC-2 renders superior image quality over the full focusing range of the camera lens. This, combined with the high brightness and contrast of the image, allows the autofocus system of the camera to work well – often better than less powerful close focus lenses. Just as important are the out-of-focus (Bokeh) portions of the image that exhibit the same creamy smooth quality that photographers appreciate when shooting macro in air – all without color fringing common to traditional magnifying lenses. AVOIDING DIFFRACTION Due to the overall superior optical performance and precision focus of the CMC-2 it is possible to shoot larger apertures with excellent image quality. This avoids reaching the diffraction limit of high resolution sensors, and allows selective focus effects with narrow depth of field in super macro images. MOUNTING, AND USING THE CMC-2 The CMC-2 ships with the common 67mm threaded lens mount. The lens has a protruding rear element, designed to place the accessory optic as close to the camera lens port as is possible, providing the best overall image quality when used with flip lens adapters. A flush mount adapter ring is used when attaching CMC-2 directly to an underwater housing, and is included with the lens. Flip and Bayonet Lens Mounts are available as accessories. MOUNTING CONFIGURATIONS The same Nauticam bayonet system designed with the Wet Wide Lens (WWL-1) is also compatible with CMC-2. (P/N 81302). The bayonet mounting system is the attachment method of choice for shooting both macro and wide angle on the same dive. Nothing beats the convenience of flip adaptors, allowing the accessory lenses to be flipped in place when needed, and conveniently swung out of the way for normal lens shooting. A flip adaptor is the best mounting system for macro only dives, or camera systems that don't support macro and wide angle lenses on the same dive (such as Canon G7X Mark II) The new M67 Double Flip Holder for M67 Macro Ports, P/N 25108 allows both CMC-1 and CMC-2 to be used on the same dive for multiple macro framing options. A WORD ON MAGNIFICATION The industry standard macro lens magnification measure is a dioptric power, but we don't feel that is actually that useful. Dioptric numbers can be misleading. They are often multiple lenses stacked together, and the resulting stack doesn't always yield the power of its individual components. In an attempt to make the power and utility of these lenses less confusing, we offer a simplified magnification factor. CMC-2 offers 2.8x magnification (as an average) with compact cameras currently supported by Nauticam housings. For comparison, CMC-1 results in 4.5x average magnification.

Installing vacuum valve to housing Remove the plug of the M14 accessory port from the housing. Remove the cap from the vacuum valve. Tighten the vacuum valve to the housing with the tool provided. Building up vacuum Remove the cap of the vacuum valve. Connect the hand pump to the valve and pump several times until it reaches the target vacuum level. The LED light will turn flashing yellow while vacuum is building up, then steady green when the target vacuum level is reached. Attention: After the target vacuum is reached, i.e. steady green light, attach the cap back to the vacuum valve. It is recommended to leave the housing for at least 20mins to ensure it is sealed. If the LED light changes from steady green light to rapidly flashing yellow light, that means there is a leakage and please check every O-ring and conduct the vacuum test again. Please ensure that the cap is attached back to the vacuum valve before going underwater. Vacuum can be released by pushing the red release button. Attention: Please DO NOT attempt to go over the designated vacuum level, i.e. stop pumping when the LED turn green. Excessive vacuum level may lead to the malfunction of the camera and lens. Note: Although the vacuum indicator is designated to compensate for a certain amount of temperature variation, it is recommended to conduct the vacuum test in an environment where the temperature is stable. After set up, the meaning of the LED indicator in the housing: Flashing “Blue” light: Standby mode. The moisture alarm is active, and the system is ready for vacuum indication whenever a vacuum is detected. Flashing “Red” light with beeping sound:Moisture is detected. Flashing “Yellow” light: Some vacuum is detected, target vacuum level is not reached. Steady “Green” light: Target vacuum level is reached. Rapidly flashing “Yellow” light: Vacuum is dropping. (Will occur only after target vacuum level is reached) Rapidly flashing “Red” light: Vacuum is totally lost. Circuit stalled until switched off. (Will occur only after target vacuum level is reached)

Plug for M14 bulkhead on underwater housings.

Gummistopfen (4 Stck.) für Sea&Sea Glasfaserkabel-Adapter (optisch) von Nauticam

An adjustable right-side handle is designed to fit the Nauticam Easitray and Nauticam Flexitray system. The right handle is shipped ready to mount to the Flexitray II and Easitray II. Included are two marine grade stainless steel screws to mount the right handle to your tray. This right side handle, as with the left side handle, is designed to accept the Nauticam base ball 1″ ball adapter. The right side handle can be adjusted for spacing both left-to-right and front-to-back. If additional length is needed, add an optional Nauticam 20mm Extension or Nauticam 30mm Extension is available.

The Nauticam Flexitray II is a very versatile and easy to use camera tray. Flexitray II W adds two 1/4-20 threaded tripod mounting holes to the popular Flexitray II. The Flexitray II W does not have the anti-rotation feature of the Flexitray II. For compact and point-and-shoot housings that have only one tripod mounting screw, please use the Flexitray II. Comparing Flexitray II (top) with Flexitray II W (bottom) Note the tripod mounting holes in the middle of the Flexitray II W. The left handle of the Flexitray II is adjustable for width (length of tray). If additional length is desired, you may add optional Nauticam 20mm extension or Nauticam 30mm extension to this tray. The handle is also adjustable front and back. This adjustment means the ability to adjust your Flexitray II for much more comfort and camera control than ordinary camera trays. The bottom side of the tray is designed to lay flat. On the top side of the tray is a rubber insert which can reduce the possibility of scratching your housing and, more importantly, increase friction between the camera housing and the tray for improved stability. The Flexitray II is supplied with 1/4 – 20 thumbscrews which fit most tripod mount threads. Thumbscrews in thread #12-24 (Ikelite housings) and 6mm thumbscrews are available. Optional T-groove plates and 1 inch ball adapters are custom designed to fit these handles. An adjustable right side handle is available that quickly mounts to this tray. With the optional Nauticam right-handle kit added the distance from handle to handle can be adjusted from 8+3/4 inch to 10+1/4 inch (center to center measurement).

Dies ist ein Ersatz N50-Standardport.

Replacement housing O-ring for this underwater housing from Nauticam. NA-RX100III NA-RX100IV NA-RX100V NA-RX100VI NA-RX100VIII NA-G5X NA-G5XII NA-G7X NA-G7XII NA-G7XIII

Diese Hartplastikkappe wird auf 67mm Makro-Ports aufgeschraubt. Mit praktischer Öse zur Befestigung eines Sicherungbandes!

A standard 1" ball mount for Easi/Flexitray handles.

Spare O-ring for the N50 port system by Nauticam

Black flash cover plate for compact housing with screws by Nauticam

The G7X Mark III camera continues to live up to the incredibly high standard set by its predecessor the G7X Mark II. Thanks to its overall image quality, snappy autofocus, excellent manual white balance, and useful built-in macro mode, this little camera makes a big impression. This feature set, paired with the most ergonomic, rugged, and easy to use underwater housing available forms a perfect underwater imaging combination. THE CANON G7X MARK III CAMERA Offering multimedia fluency within a compact design, the Canon PowerShot G7X Mark III is a sleek camera distinguished by its advanced sensor design and flexible imaging capabilities. Its 20.1MP 1" CMOS sensor uses a stacked design, which pairs with the DIGIC 8 image processor to realize especially fast focusing performance, full-resolution shooting at up to 20 fps, and UHD 4K30p video recording. Optically, the G7X Mark III houses a 4.2x zoom lens, which covers a 24-100mm equivalent focal length range for wide-angle to short-telephoto fields of view. An f/1.8-2.8 maximum aperture range suits working in difficult lighting conditions as does an Optical Image Stabilizer, which compensates for the effects of camera shake. The camera's slim design also incorporates a 3.0" 180° tilting touchscreen LCD and has both Bluetooth and Wi-Fi for wirelessly connecting to a mobile device. Key Camera Specifications 20.1MP 1"-type BSI CMOS sensor 24-100mm F1.8-F2.8 lens 3" tilting touchscreen LCD 30 fps continuous shooting at 8.8 MP resolution (RAW) 4k/30p 1080/60p video capture THE NAUTICAM NA-G7XIII HOUSING NA-G7XIII is the latest iteration in a lineup of advanced housings for very capable compact cameras supported by Nauticam. Many features found on professional DSLR systems have been integrated into this system, and the result is an underwater housing that allows the user to harness the full potential of this advanced compact camera in the water. The basic functions and ergonomic enhancements that Nauticam users have grown to know and love are incorporated in NA-G7XIII. The housing is machined from a solid block of aluminum, then hard anodized to seal out corrosive salt water. It is closed via a simple, yet secure locking rotary latch. The right side of the housing is sculpted to fit the palm of the user’s hand, and Nauticam’s two-stage shutter release lever provides clear differentiation between the half press and full press shutter release positions. All functions are clearly labeled. The Nauticam leak alarm and vacuum monitoring system is installed as standard equipment. This system provides an audible and visual alert to any water entry in the housing, and when combined with an accessory M14 Vacuum Valve (#25624) the watertight integrity of the system can be tested before ever entering the water and monitored during every dive. Expert product design, modern manufacturing techniques, top quality materials backed by a two-year warranty, and a critical focus on the user experience combine to produce the premier system for Canon Powershot G7X Mark III. The Nauticam NA-G7XMKIII. THE N50 PORT SYSTEM The NA-G7X Mark III ships with the “Standard” Port but other ports are available from the N50 system. Supplied with the housing, this port allows full zoom through and features a 67mm threaded front for attaching accessory macro lenses or a flip-adapter. This port is ideal for mid-range fish portraiture or close-up and macro work with add on wet-lenses. INTEGRATED VACUUM CHECK AND LEAK DETECTION SYSTEM The Nauticam vacuum check and leak detection system is shipped with NA-G7XMKIII as standard equipment. Combined with an accessory vacuum valve (PN 25624), this monitoring system provides constant updates on the watertight and safe-to-dive status of the housing. A simple color-coded LED lighting system lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur. The Nauticam system is temperature compensated, eliminating false alarms caused by a change in outside temperature, or from a camera heating up on an action-packed dive. OPTIONAL PRO PACKAGE CONFIGURATION The NA-G7XIII is also available in the Pro Package configuration that comes with the Flexitray II, Right Handle, two ball-mounts and M14 vacuum valve pre-installed. The standard NA-G7XIII ships with stainless steel stiffening brackets and shutter release extension should a Nauticam Easitray or Flexitray be added later. HDMI OUTPUT The G7X Mark III has HDMI output for video, allowing for the use of external monitors which make judging exposure, focus and composition easier than using the built-in LCD of the camera. Nauticam has included an m16 port on the NA-G7XIII to take advantage of HDMI connectivity. By adding the optional NA25028 Socket Extension and connection from HDMI bulkhead to camera) *2 *1 M16 extension ring is required, which is included in NA-058/502H/FHD5/502B-H monitor housing. *2 The pop-up flash needs to be in up position in order for the internal cable to work (flash up lever is disabled when using an external monitor)

The housing for Canon Powershot G7X Mark III allows to capitalize on the camera full potential and to capture amazing pictures underwater. Product details An easy to use, highly professional product has been created through techniques and innovations gained from years of experience. The housing for  Canon Powershot G7X Mark III perfect handling by means of an adjustable strips. Easy access to all key/main camera controls by means of clearly labelled laser-engraved longlasting buttons. An easy and quick release camera mounting plate allows the camera positioning; the back door has a large window for a fine camera display view and it is entirely detached from the front body to make easier the camera fitting. One Hand open/close It's very easy to open and close Canon Powershot G7X Mark III, without any efforts by the user thanks to the side helicoid screw and the bottom centered pins; the camera is placed easily into the housing on a sliding tray that keeps the camera robustly in place. A lever locks the tray safely inside the housing. The housing stands with great stability due to sturdy and wide rubber feet located on the bottom. Port, Close-up and Wide-angle Lenses Front portholes are built with high quality standards of materials to ensure a perfect image quality. A removable flat port is fitted thanks to markers and a bayonet connection to Canon Powershot G7X Mark III housing. A M67 threaded end allows the use of additional wet wide angle lenses and macro lenses. For extreme additional wide angle lens a shorter porthole is available. Lighting Canon Powershot G7X Mark II own strobe lighting can be used fitting an outside diffuser on the porthole. For better performance with wide angle lenses, one or two external strobes can be connected by optical fiber using the adaptor included. Construction and Safety Only the best materials are used to manufacture our housings such anodized aluminum which is anticorodal and thermo-coated and stainless steel. A longlasting product that requires easy and simple maintenance by the user. So small and so rich in technology! Dual high precision and quality O-Ring seals protect and ensure a perfect and secure watertight for all movable and / or removable parts; a red alarm for humidity/water inside the housing is powered by a battery replaceable by the user. Working depth is 100 metres. An hole positioned on the bottom allows to secure the housing for Canon Powershot G7X Mark III with a line/strap. Different accessories can be fitted by means of an upper sliding tray and double threaded M6 holes and one 1/4W on the bottom. Controls ON/OFF of Canon PowerShot G7X Mark III; Own camera strobe open/close; Ergonomic camera focusing and shutter button for an easy use with gloves; Shutter speed priority; Lens aperture;  

The FG7X III housing has been specially designed for the Canon PowerShot G7 X Mark III digital camera. The FG7X III housing is manufactured to the highest professional standards of function, style and durability. It is rated to a depth of 60m and is fully functional with ergonomically designed and labelled controls. The Fantasea FG7X II is the ultimate waterproof housing for the Canon PowerShot G7 X Mark III camera. The FG7X III body is ideal for outdoor and underwater photography. Underwater photographers can dive or snorkel and capture all the excitement of this fascinating world, while outdoor photographers can also capture the action of activities such as white water sports, sailing, boating, surfing, fishing, hunting and camping. The FG7X II body is shock resistant and protects the camera from water, sand, dust and other harmful elements.  The FG7X III body is designed to be compatible with a complete accessory system that enables photographers to enhance the quality of their images. The FG7X III vacuum housing features the Fantasea Hybrid Vacuum Safety System (included), which includes both a pre-dive vacuum check and a leak detector during diving. The system makes it possible to confirm the waterproofness of the housing before the dive with the vacuum system and to monitor the housing seal during the dive with the moisture detector. Performance features: Ergonomic design Made from durable injection-moulded polycarbonate Full access to all camera controls and functions with clearly marked controls. Shock resistant Double O-ring seal Dedicated holder for lighting accessories Detachable double fibre optic cable connector Removable flash diffuser Easy and secure camera installation Removable anti-glare cover for LCD screen Record button for video function in any recording mode BONUS - Moisture detector, hand strap and port cover are included at no extra charge! Hybrid Vacuum System from Fantasea

Provides an additional ball mount for housings with available M10 threaded mount. Installation Guide: Nauticam M5 & M10 Strobe Mounting Balls from Nauticam on Vimeo.

Standard 1" ball mount that attaches to the cold-shoe mount of compatible housings. Specially designed metal plate prevents the ball mount from slipping off even if it becomes slightly loose.