Sony Cyber-shot DSC-RX100 V(A) Underwater Housing by Nauticam
Photos show accessories that are not part of your order. Only the content of the tab "What's in the box" is relevant.
on stock
Product number:
NA17418
HAN:
NA-RX100V
Available stock:
1
With the RX100 V Sony has continued to add features to this workhorse compact camera and Nauticam is keeping pace with the new NA-RX100V. The NA-RX100V housing provides the ergonomics, build quality, and innovative feature set our customers demand in a tiny, travel friendly package. Nauticam designs are always improving, and new features integrated into each new release. The ergonomic experience has been tailored for a photographer's right hand on the side of the housing, placing key controls literally at the users finger tips.
THE SONY CYBER-SHOT RX100 V CAMERA
Dubbed "the Fast Five" by DPReview.com, the fifth installment in the now legendary RX100 series adds exceptional autofocus speed and a mind blowing 24 frames per second burst mode to the already well rounded and capable feature set found on RX100 IV.
The core RX100 DNA that has made this series so exceptionally popular is unchanged. These features include a large backside illuminated sensor in a compact body that can easily fit into a shirt pocket, a fast 24-70mm zoom lens, and Ultra High Definition Video.
Speed, both in focusing, and continuous shooting, catapults RX100 V to the top of the compact camera class. The DSC-RX100 V adds a 315 point phase detect af sensor array covering 65% of the frame. Phase detect focus systems can acquire focus more quickly than the contrast detect enabled competition. Hunting for focus is virtually eliminated, and the continuous and tracking focus modes are much better at tracking fast action.
The 24 fps Continuous Hi shooting mode (complete with autofocus, auto exposure, and raw capture capability) provides a completely new way of shooting behavior. Still photo strobes can't keep up with this frame rate, but with ambient light or LED video lights this high speed burst mode. Even the Continuous Mid mode is on par with the continuous shooting speeds possible with pro body DSLR cameras
Sony Cyber-shot RX-100 V Key Specifications:
- 20.1 MP 1"-type stacked CMOS Sensor
- f/1.8-2.8 24-70mm equivalent zoom lens
- Optical Image Stabilization
- 1/32,000 sec max electronic shutter speed (1/2,000 sec mechanical shutter)
- 24 fps continuous shooting
- Slow motion video recording up to 1000 fps (960 fps in NTSC mode)
- 4K (UHD) video recording with full sensor readout at 100 Mbps
- SLog2 gamma setting
- Tilting 3" 1.3m dot LCD
- Pop-up 2.36m dot OLED electronic viewfinder
- Built-in ND filter
- Wi-Fi with NFC
Example setup
THE NAUTICAM NA-RX100V UNDERWATER HOUSING
The NA-RX100V Underwater Housing by Nauticam sets a new standard for compact camera housing design. It is the ultimate refinement of the models that came before it, and proven in the field.
Nauticam designs are always improving, and new features integrated into each new release. The ergonomic experience has been tailored for a photographer's right hand on the side of the housing, placing key controls literally at the users finger tips. Some users, especially those wearing cold water gloves, prefer shooting from handles such as the Nauticam Flexitray and Easitray. To better support this style of shooting, a set of stainless steel handle brackets and amechanical shutter release trigger extension is included with every housing.
The RX100V housings features an industry standard 67mm threaded port mount, meaning it is easy to attach a number of different wet mount lenses. A compact camera underwater is only as good as the optics in front of it, and the growing Nauticam accessory lens lineup sets new performance standards with every release.
On the macro end, the Compact Super Macro Converter (CMC) is the ideal choice and enables a subject 35mm wide by 23mm tall to fill the frame. This is over 4x magnification provided by the stock lens (stock lens images 160mm wide, CMC 35mm wide).
All Nauticam lenses are engineered specifically for underwater imaging, not waterproof adaptations of lenses designed for use in air, resulting in superior image quality. The CMC provides visibly sharper images than competing macro lenses, especially in the corders, with noticeably less purple fringing. The lens design is also designed with autofocus systems in mind, easing the learning curve associated with high magnification imaging..
WET WIDE ANGLE LENS
This completely sealed and underwater mountable optic is designed to be used in water – with the refractive index of optical glass to water accounted for at every step in the design process. Optimized for best wide angle performance at the 28mm equivalent focal length, the lens offers 130° diagonal field of view with low distortion, extremely high overall sharpness (especially in the corners), excellent contrast, and resistance to flare.
The outstanding image quality of today's top compacts paired with Nauticam conversion lenses is stunning. They combine to form a complete system that covers the entire range from macro to super wide angle, and packs into a small backpack or shoulder bag
VIDEO
The standard NA-RX100V housing supports HDMI out, via an optional HDMI bulkhead connected to the M16 accessory hole in the front of the housing. This means that the underwater videographer can use the excellent SmallHD 501 or 502 Monitors (in the NA-502S housing, p/n 17907), the Atomos Ninja 2 Recorder (NA-NINJA2 housing, p/n 17902), or even the Atomos Shogun UHD Recorder (Nauticam Housing p/n 17904). The RX100IV camera offers "clean" HDMI output, allowing high bit rate Apple ProRes recording at up to 4k 30P with Shogun.
The line between a camcorder and still camera no longer exists, with examples like RX100 V providing excellent capture functionality for both still and motion images. RX100 IV is an excellent upgrade from your favorite action cam, and can even fill a POV or Pole Cam role on natural history productions.
| Attachment lens thread: | M67 |
|---|---|
| Body Material: | aluminum |
| Camera System: | Compact camera |
| Camera manufacturer: | Sony |
| Lens operation: | Camera zoom function |
| Monitor connection: | HDMI |
| Pane material: | Optical glass |
| Port shape: | flat port |
| Strobe connector: | optical Sea&Sea |
| Tripod connection: | Thread ¼ |
| portsystem: | Fixed port |
Technical data
- Depth Rating: 100m
- Weight: 0.85kg
- Dimensions: 150mm (W) × 101mm (H) × 109mm (D)
- Port Opening: N/A
Scope of delivery
- Sony Cyber-shot DSC-RX100 V Underwater Housing by Nauticam
- Set of handle brackets with shutter release extension
- Spare silicone rubber O-ring for housing
- O-ring remover
- CR2032 battery
- Lubricant
- Set of Allen keys
- travel bag
Only the components of the item that are listed here will be delivered. Accessories and/or decoration shown in our images are for demonstration purposes only. In particular, we would like to point out that the purchase of an underwater housing does not include a camera and often not a port nor an external viewfinder. If you have any questions about the configuration of your system, do not hesitate to contact us.
Login
There aren't any asked questions yet.
Similar products
Sony Cyber-shot RX 100 V Pro Package by Nauticam
€1,765.00*
The Pro Package includes the NA-RX100V underwater housing from Nauticam:
Flexitray handle rail with right and left handle
Trigger extension
2 ball head adapters
Vacuum valve with hand pump
With the RX100 V Sony has continued to add features to this workhorse compact camera and Nauticam is keeping pace with the new NA-RX100V. The NA-RX100V housing provides the ergonomics, build quality, and innovative feature set our customers demand in a tiny, travel friendly package. Nauticam designs are always improving, and new features integrated into each new release. The ergonomic experience has been tailored for a photographer's right hand on the side of the housing, placing key controls literally at the users finger tips.
The SONY CYBER-SHOT RX100 V CAMERA
Dubbed "the Fast Five" by DPReview.com, the fifth installment in the now legendary RX100 series adds exceptional autofocus speed and a mind blowing 24 frames per second burst mode to the already well rounded and capable feature set found on RX100 IV.
The core RX100 DNA that has made this series so exceptionally popular is unchanged. These features include a large backside illuminated sensor in a compact body that can easily fit into a shirt pocket, a fast 24-70mm zoom lens, and Ultra High Definition Video.
Speed, both in focusing, and continuous shooting, catapults RX100 V to the top of the compact camera class. The DSC-RX100 V adds a 315 point phase detect af sensor array covering 65% of the frame. Phase detect focus systems can acquire focus more quickly than the contrast detect enabled competition. Hunting for focus is virtually eliminated, and the continuous and tracking focus modes are much better at tracking fast action.
The 24 fps Continuous Hi shooting mode (complete with autofocus, auto exposure, and raw capture capability) provides a completely new way of shooting behavior. Still photo strobes can't keep up with this frame rate, but with ambient light or LED video lights this high speed burst mode. Even the Continuous Mid mode is on par with the continuous shooting speeds possible with pro body DSLR cameras!
Sony Cyber-shot RX-100 V Key Specifications:
20.1 MP 1"-type stacked CMOS Sensor
f/1.8-2.8 24-70mm equivalent zoom lens
Optical Image Stabilization
1/32,000 sec max electronic shutter speed (1/2,000 sec mechanical shutter)
24 fps continuous shooting
Slow motion video recording up to 1000 fps (960 fps in NTSC mode)
4K (UHD) video recording with full sensor readout at 100 Mbps
SLog2 gamma setting
Tilting 3" 1.3m dot LCD
Pop-up 2.36m dot OLED electronic viewfinder
Built-in ND filter
Wi-Fi with NFC
THE NAUTICAM NA-RX100V UNDERWATER HOUSING PRO PACKAGE
The NA-RX100V sets a new standard for compact camera housing design. It is the ultimate refinement of the models that came before it, and proven in the field.
Nauticam designs are always improving, and new features integrated into each new release. The ergonomic experience has been tailored for a photographer's right hand on the side of the housing, placing key controls literally at the users finger tips. Some users, especially those wearing cold water gloves, prefer shooting from handles such as the Nauticam Flexitray and Easitray. To better support this style of shooting, a set of stainless steel handle brackets and amechanical shutter release trigger extension is included with every housing and this PRO package includes the Flexitray with right handle as well and two mounting balls for the handles.
Ready for transformation
The RX100V housings features an industry standard 67mm threaded port mount, meaning it is easy to attach a number of different wet mount lenses. A compact camera underwater is only as good as the optics in front of it, and the growing Nauticam accessory lens lineup sets new performance standards with every release.
Big in macro
All Nauticam lenses are engineered specifically for underwater imaging, not waterproof adaptations of lenses designed for use in air, resulting in superior image quality. The CMC provides visibly sharper images than competing macro lenses, especially in the corders, with noticeably less purple fringing. The lens design is also designed with autofocus systems in mind, easing the learning curve associated with high magnification imaging.
On the macro end, the Compact Super Macro Converter (CMC) is the ideal choice and enables a subject 35mm wide by 23mm tall to fill the frame. This is over 4x magnification provided by the stock lens (stock lens images 160mm wide, CMC 35mm wide).
Wide-angle attachment lens
This completely sealed and underwater mountable optic is designed to be used in water – with the refractive index of optical glass to water accounted for at every step in the design process. Optimized for best wide angle performance at the 28mm equivalent focal length, the lens offers 130° diagonal field of view with low distortion, extremely high overall sharpness (especially in the corners), excellent contrast, and resistance to flare.
The outstanding image quality of today's top compacts paired with Nauticam conversion lenses is stunning. They combine to form a complete system that covers the entire range from macro to super wide angle, and packs into a small backpack or shoulder bag
Video
The standard NA-RX100V housing supports HDMI out, via an optional HDMI bulkhead connected to the M16 accessory hole in the front of the housing. This means that the underwater videographer can use the excellent SmallHD 501 or 502 Monitors (in the NA-502S housing, p/n 17907), the Atomos Ninja 2 Recorder (NA-NINJA2 housing, p/n 17902), or even the Atomos Shogun UHD Recorder (Nauticam Housing p/n 17904). The RX100IV camera offers "clean" HDMI output, allowing high bit rate Apple ProRes recording at up to 4k 30P with Shogun.
The line between a camcorder and still camera no longer exists, with examples like RX100 V providing excellent capture functionality for both still and motion images. RX100 IV is an excellent upgrade from your favorite action cam, and can even fill a POV or Pole Cam role on natural history productions.
Sony RX100 VA / V / IV / III Underwater housing FRX100 V from Fantasea
The FRX100 V housing has been specially designed for the Sony Cyber-shot RX100 III, RX100 IV, RX100 V and RX100 VA digital cameras. The FRX100 V housing is manufactured to the highest professional standards of function, style and durability. It is rated to a depth of 60m and is fully functional with ergonomically designed and labelled controls. The Fantasea FRX100 V is the ultimate waterproof housing for the Sony RX100 III, RX100 IV, RX100 V and RX100 VA cameras.
The FRX100 V housing is shockproof and protects the camera from water, sand, dust and other harmful elements.
The FRX100 V housing is designed to be compatible with a complete accessory system that allows photographers to enhance the quality of their images.
Features (highlights)
Ergonomic design
Full access to all key camera controls and functions with clearly marked controls.
Solid
Double O-ring seal
Special holder for lighting accessories.
Detachable double fibre optic cable connector.
Removable flash diffuser
Easy and secure camera installation
Removable anti-glare cover for the LCD screen.
BONUS - Moisture analyzer is installed in every FRX100 V housing at no extra charge!
BONUS - Hand strap and port cover included.
Special video control button for easy filming in any shooting mode.
Compatible with a variety of underwater photo accessories
(*) Important Note: The FRX100 V housing is very similar to the FRX100 IV housing. However, the FRX100 IV housing has a built-in front mount thread that is compatible with 55 mm attachment lenses and also includes a 55 - 67 mm lens ring adapter. The FRX100 V housing has a built-in front mount thread that is compatible with 67 mm attachment lenses and is therefore not compatible with 55 mm attachment lenses.
Sony RX100 III/IV/V(A) Underwater Housing by Sea&Sea
€1,399.00*
The latest MDX-RX100 lll housing is compatible with the Sony RX100 lll, lV and V cameras.
* The MDX-RX100 lll housing with serial numbers above ...0201 is compatible with all of the above cameras.
* If you would like to have the housing modified to accommodate the SONY RX100 V camera, please contact us before ordering.
Adapter lenses or filters with threaded connection M67 can be mounted on the port
The port is threaded so that the M67 wide-angle converter lens 0.6x can be mounted directly.
* If the lens is used with the widest angle, vignetting will occur in the corners of the image. Zoom in slightly (approx. 30 mm angle of view) to avoid vignetting.
Two SA8 ball head adapter mounts built in
By attaching the SA8 ball head adapter to the specially designed brackets located on the top and side of the housing, SA8 components can be mounted on the housing without a handle or rail. Mounting the SA8 ball head for hot shoe adapter offers even more versatile lighting options. Additional flashes or lamps can be used.
LCD monitor bonnet with lens can be mounted
The LCD bonnet reduces reflections and provides a clear and complete view of the camera's LCD screen. (LCD bonnet stopper included)
All camera functions can be operated underwater.
The large control dial on the front of the housing connects to the camera's control ring and enables smooth operation of manual focus and other functions.
The multi-purpose control dial on the back of the camera is operated via the multi-point control on the back of the housing. All controls are easily accessible and can be operated with the right hand.The flash built into the camera can be activated and deactivated from the walker.Equipped with two fibre optic cable sockets.
Optional leak sensor can be installed in the housing. The LED light is located in the LCD monitor window and warns you of water ingress. The sensor warns you immediately of water ingress when the super bright LED lights up. Equipped with two sacrificial zinc diodes (one in the front of the housing and one on the back) to prevent electrolyte damage.
The camera can be mounted in the housing with the Sony AG-R2 accessory handle, so that it can be used comfortably and stably on land if required.
Non-slip rubber on the upper right rear handle, which keeps the handle stable.
The housing is easy to open and lock with the twist lock and hinge.
External flash or light can be mounted by attaching an SA8 rail & handle 2118 to the tripod thread on the underside of the housing.
A rated depth of 100m makes the housing ideal for tech diving.
on stock
Sony RX100 Mark V and VA Underwater housing by Isotta
€1,105.00*
The housing for Sony Cyber-shot RX100 Mark V / RX100 Mark VA allows to capitalize on the camera full potential and to capture amazing pictures underwater.
Product details
An easy to use, highly professional product has been created through techniques and innovations gained from years of experience. The housing for Sony Cyber-shot RX100 Mark V / RX100 Mark VA perfect handling by means of an adjustable strips. Easy access to all key/main camera controls by means of clearly labelled laser-engraved longlasting buttons. An easy and quick release camera mounting plate allows the camera positioning; the back door has a large window for a fine camera display view and it is entirely detached from the front body to make easier the camera fitting.
ONE HAND OPEN/CLOSE
It's very easy to open and close Sony Cyber-shot RX100 Mark V / RX100 Mark VA, without any efforts by the user thanks to the side helicoid screw and the bottom centered pins; the camera is placed easily into the housing on a sliding tray that keeps the camera robustly in place. A lever locks the tray safely inside the housing. The housing stands with great stability due to sturdy and wide rubber feet located on the bottom.
PORT, CLOSE-UP AND WIDE-ANGLE LENSES
Front portholes are built with high quality standards of materials to ensure a perfect image quality. A removable flat port is fitted thanks to markers and a bayonet connection to Sony Cyber-shot RX100 Mark V / RX100 Mark VA housing. A M67 threaded end allows the use of additional wet wide angle lenses and macro lenses.
LIGHTING
Sony Cyber-shot RX100 Mark V / RX100 Mark VA own strobe lighting can be used fitting an outside diffuser on the porthole. For better performance with wide angle lenses, one or two external strobes can be connected by optical fiber using the adaptor included.
CONSTRUCTION AND SAFETY
Only the best materials are used to manufacture our housings such anodized aluminum which is anticorodal and thermo-coated and stainless steel. A longlasting product that requires easy and simple maintenance by the user. So small and so rich in technology! Dual high precision and quality O-Ring seals protect and ensure a perfect and secure watertight for all movable and / or removable parts; a red alarm for humidity/water inside the housing is powered by a battery replaceable by the user. Working depth is 100 metres. An hole positioned on the bottom allows to secure the housing for Sony Cyber-shot RX100 Mark V / RX100 Mark VA with a line/strap. Different accessories can be fitted by means of an upper sliding tray and double threaded M6 holes and one 1/4W on the bottom.
Controls
ON/OFF of Sony Cyber-shot RX100 Mark V / RX100 Mark VA
Own camera strobe open/close
Ergonomic camera focusing and shutter button for an easy use with gloves
Shutter speed priority
Lens aperture
Highlights
All Sony Cyber-shot RX100 Mark V / RX100 Mark VA key main controls
M16x1 hole for vacuum system or external monitor
Easy one hand housing open/close
Moisture sensor
Double high precision and quality O-Ring seals
HDMI 1.4
on stock
Long Standard Clamp
€50.00*
Nauticam clamp for attaching two 1" standard ball mount accessories together that features a longer clamp body for use with flotation arms or other applications that requires a greater clearance than the normal standard clamp.
The Nauticam Light Mounting System features a complete array of industry standard 1" ball mount arms, clamps, floats and accessories for attaching a variety of lighting solutions to your housing.
on stock
Strobe mounting ball for cold shoe
€48.00*
Standard 1" ball mount that attaches to the cold-shoe mount of compatible housings. Specially designed metal plate prevents the ball mount from slipping off even if it becomes slightly loose.
on stock
HDMI (D-D) cable in 200mm length
€58.00*
HDMI cable with connectors from type D (Micro) to type D (Micro) for connecting a camera to an HDMI socket in 200 mm length (approx. 7.9").
For use with the following underwater cameras by Nauticam:
NA-RX100V
NA-GH4
NA-A7
NA-A1
Underwater Monitor WED-7 Pro
€1,568.00*
The WED-7 Pro is a professional HD monitor specially designed for underwater photographer.
The product is made of aluminum alloy, with carbon-fiber trim panels and delicate stainlesssteelchrome-plated buttons. It is High-end and professional product. The underwater monitor uses a full HD FHD display, plays for 4K HDMI input and outout,and is configuredwith a variety of auxiliary tools, so that the photographer is more freely and with ease in shooting.
Professional auxiliary shooting function: The product has a variety of professional shooting functions, such as: brightness histogram, audio column, auxiliary focus, false color, exposure prompt, monochrome display, nine grid, square, etc., all can better help the photographer effectively monitor and control the picture to the process of shooting and creating works.
Long back-up life: The product is powered by two 18650 lithium batteries, the longest working time can be up to 3.5 hours, and the product has a battery indicator light, so that the photographer can observe the battery power at any time.
4K signal transmission: The product supports 4K HDMI input and output, and high-definition pictures of the camera can be displayed on the monitor in real time through 4K signal transmission of HDMI.
7-inch FHD: The product features a 7-inch full HD screen with 1920x1200 resolution and 440PPI pixel density, as well as 500CD /m² high brightness and 1200:1 high contrast.
Ultra-wide viewing Angle: The choice of IPS display has an ultra-wide viewing Angle of 160°, which allows the photographer to easily get a clear picture when adjusting the position.
True color: The product uses the trustworthy Rec.709 high-definition color standard in the professional field, and accurately restore the color without distortion or color bias, it shows the real image.
Hood: The product design has a professional hood, so that the photographer can get the ideal viewing effect when using in the outdoor bright light.
Excellent image processing engine: the product is matched with an independent image processing engine, which improves the light and dark effect and contrast of the picture, so that the picture quality is more exquisite.
Excellent deep waterproofing effect: UP to 80m/263ft IP68 waterproofing grade: professional waterproofing design, full process technology and quality control, as well as real simulation of various deep water conditions of pressure testing.
on stock
WED-5 Underwater Monitor
€998.00*
5-inch HD Underwater Monitor by Weefine
A lightweight made of aluminium that is travel-friendly and practical. This is how the WED-5 underwater monitor from Weefine presents itself. With a brightness of just under 500 nits and 16.7 million colours, it allows you to fully assess your shots even in the water.
The monitor housing is milled from aluminium in the highest precision and then protected with a solid surface anodisation. This makes the monitor resistant to salt water and overheating.
M16 Adaptor (long) for HDMI cable
€25.00*
For self-installation on suitable underwater housings with M16 bulkhead.
Wide Angle
on stock
Wet Wide Lens C (WWL-C) by Nauticam
€1,030.00*
The next evolution of the WWL-1 is here! As the versatility and capability of compact cameras increases, Nauticam has developed a smaller and lighter water contact wide angle lens tailored specifically to the compact camera user. Designed from the ground up to match the compact camera's form factor without sacrificing optical quality, the WWL-C is a powerful addition to not only Nauticam compact housings but also, via an optional adapter, to those from other manufacturers such as the Olympus TG-6 and their PT-059 housing.
Introducing Wet Wide Lens for Compact Cameras (WWL-C)
With the original Wet Wide Lens, the WWL-1, Nauticam used computer aided lens design software to create an underwater-specific corrective lens that allowed for an unprecedented 130º field-of-view with full zoom-through optics and extreme close focus capabilities. The WWL-1 wasn't just for higher end cameras that already benefitted from interchangeable lenses to attain better image quality, the WWL-1 was designed to work with a variety of cameras that featured a 28mm equivalent lens including compacts and micro-four thirds.
Delivering a stunningly sharp 130º field-of-view with 24mm equivalent lenses, the WWL-C also features zoom-through capable optics.** The WWL-C features a pre-installed metal buoyancy collar and a non-removable metal dome shade.
The WWL-C will also feature an updated quick-release Bayonet Mount. Lenses that feature the new Bayonet Mount II will not be compatible with previous Bayonet Mount adapters but all Bayonet Mount lenses will be able to be used with the new Bayonet Mount II Bayonet Mount Adapters without modification.
In the sidebar you will find a list of anticipated housing compatibility along with the supported focal-length range as well as the necessary port configuration for the Bayonet Mount II standard.
Compact Housings
The WWL-C is designed around the 24mm focal length which is commonly the widest focal length for fixed-lens compact cameras. While the WWL-1 was also able to deliver 130º field-of-view it required that the camera's lens be zoomed in slightly to 28mm. With the WWL-C, there's no more need to zoom to avoid vignette! This also means that more of the camera's zoom range is available.
The new NA-TG6 (17816) for the Olympus Tough TG-5 and TG-6 cameras is WWL-C ready out-of-the-box as it comes with the new Bayonet Mount II converter pre-installed. With the TG-5 and TG-6 the WWL-C allows for use of the 25-100mm zoom range!
For those compact housings with the N50 interchangeable port system, there are new short ports with Bayonet Mount II adapters pre-installed.
Configurations for some of the latest models:
Sony RX100 VII in the NA-RX100VII use (38705) N50 Short Port 17 with Bayonet Mount with a usable zoom range of 24-30mm
Canon PowerShot G5X Mark II in the NA-G5XII use (38703) N50 Short Port 25 with Bayonet Mount with a usable zoom range of 24-50mm
Panasonic Lumix DMC-LX100 II in the NA-LX100II use (38704) N50 Short Port 22 with Bayonet Mount with a usable zoom range of 24-30mm
Complete configurations for all supported models can be found on the Port Chart for the WWL-C.
Mirrorless M4/3 Housings
The WWL-C is not just for compact cameras! The Panasonic LUMIX G VARIO 12-32mm F3.5-5.6 ASPH. MEGA O.I.S. lens, when used with (36165) N85 Power zoom macro port 29 and the (83250) M67 to bayonet converter II allows for the use of the full 12-32mm zoom range.
Mirrorless APS-C Housings
Sony, Canon, Nikon and Fuji Mirrorless APS-C can all benefit from the WWL-C. The Sony SELP1650 E PZ 16-50mm F3.5-5.6 OSS offers excellent performance from 17-50mm with only slight vignetting at 16mm. The compact size of the WWL-C works in tandem with the low profile series of Nauticam housing for Sony's E-mount APS-C series of cameras such as the NA-A6600 and NA-A6400 to provide a travel-friendly package that doesn't compromise optical quality.
Adapter for Olympus PT058/PT059 Housings
Using the WWL-C with the Olympus PT058 and PT059 Housings for their Tough TG-5 and TG-6 cameras is now also an option with the (83256) Bayonet Mount Converter for Olympus PT058/059.
on stock
M67 to Bayonet Mount Converter II
€100.00*
This Bayonet Mount Converter II is designed for M67 threaded ports to use with Water Contact Optics. This works with 1st generation bayonet mount optics as well as the new 2nd generation (WWL-C).
Trays and handles
on stock
Easitray II with Left Handle
€125.00*
The Nauticam Easytray is a versatile tray and handle for smaller housings. The Easitray is very similar to the Nauticam Flexitray; however the Easitray left handle is not adjustable.
The Easitray is supplied with 1/4 – 20 thumbscrews which fit most tripod mount threads. Thumbscrews in thread #12-24 (for Ikelite Housings) and 6mm thumbscrews are available.
The top of the handle accepts Nauticam 1″ balls or T-plate adapters. An adjustable right side handle is available that quickly mounts to this tray.
A rubber insert in the base of the tray can reduce scratching of your housing and provides friction to improve camera stability.
The Easitray fits a wide variety of cameras and camera housings.
on stock
Adjustable Right Handle for Easitray & Flexitray II
€55.00*
An adjustable right-side handle is designed to fit the Nauticam Easitray and Nauticam Flexitray system. The right handle is shipped ready to mount to the Flexitray II and Easitray II.
Included are two marine grade stainless steel screws to mount the right handle to your tray.
This right side handle, as with the left side handle, is designed to accept the Nauticam base ball 1″ ball adapter.
The right side handle can be adjusted for spacing both left-to-right and front-to-back. If additional length is needed, add an optional Nauticam 20mm Extension or Nauticam 30mm Extension is available.
on stock
Strobe Mounting Ball for Easitray & Flexitray
€20.00*
A standard 1" ball mount for Easi/Flexitray handles.
Ball heads
on stock
M10 Strobe Mounting Ball for Housing
€40.00*
Provides an additional ball mount for housings with available M10 threaded mount.
Installation Guide: Nauticam M5 & M10 Strobe Mounting Balls from Nauticam on Vimeo.
on stock
Strobe mounting ball for cold shoe
€48.00*
Standard 1" ball mount that attaches to the cold-shoe mount of compatible housings. Specially designed metal plate prevents the ball mount from slipping off even if it becomes slightly loose.
on stock
M14 Vacuum Valve II
€205.00*
Installing vacuum valve to housing
Remove the plug of the M14 accessory port from the housing. Remove the cap from the vacuum valve. Tighten the vacuum valve to the housing with the tool provided.
Building up vacuum
Remove the cap of the vacuum valve. Connect the hand pump to the valve and pump several times until it reaches the target vacuum level. The LED light will turn flashing yellow while vacuum is building up, then steady green when the target vacuum level is reached.
Attention: After the target vacuum is reached, i.e. steady green light, attach the cap back to the vacuum valve.
It is recommended to leave the housing for at least 20mins to ensure it is sealed. If the LED light changes from steady green light to rapidly flashing yellow light, that means there is a leakage and please check every O-ring and conduct the vacuum test again.
Please ensure that the cap is attached back to the vacuum valve before going underwater.
Vacuum can be released by pushing the red release button.
Attention: Please DO NOT attempt to go over the designated vacuum level, i.e. stop pumping when the LED turn green. Excessive vacuum level may lead to the malfunction of the camera and lens.
Note: Although the vacuum indicator is designated to compensate for a certain amount of temperature variation, it is recommended to conduct the vacuum test in an environment where the temperature is stable.
After set up, the meaning of the LED indicator in the housing:
Flashing “Blue” light: Standby mode. The moisture alarm is active, and the system is ready for vacuum indication whenever a vacuum is detected.
Flashing “Red” light with beeping sound:Moisture is detected.
Flashing “Yellow” light: Some vacuum is detected, target vacuum level is not reached.
Steady “Green” light: Target vacuum level is reached.
Rapidly flashing “Yellow” light: Vacuum is dropping. (Will occur only after target vacuum level is reached)
Rapidly flashing “Red” light: Vacuum is totally lost. Circuit stalled until switched off. (Will occur only after target vacuum level is reached)
LCD Magnifier attachment rails for NA-RX100III/RX100IV/RX100V
€33.00*
The mounting rails are required to attach the LCD enlarger to the following Nauticam underwater housings:
-NA-RX100III -NA-RX100IV -NA-RX100V -NA-RX100VI -NA-LX10/NA-RX100III
NA-RX100IV
NA-RX100V
NA-RX100VI
NA-LX10/15
LCD Magnifier with Dioptric Adjustment
€225.00*
The LCD Magnifier uses a specially designed underwater +10 achromatic optic and features a dioptric adjustment so the user can dial in the lens correction to get a very sharp view of the camera LCD. The molded rubber sunshade virtually eliminates problems seeing the LCD in bright sunlight.
Spare parts
on stock
M16 plug for housing (with o-ring)
€23.00*
To cover an M16 socket on an underwater housing from Nauticam.
on stock
Housing o-ring 90135
€21.00*
Replacement housing O-ring for this underwater housing from Nauticam.
NA-RX100III
NA-RX100IV
NA-RX100V
NA-RX100VI
NA-RX100VIII
NA-G5X
NA-G5XII
NA-G7X
NA-G7XII
NA-G7XIII
Macro
on stock
Compact Macro Converter CMC-1
€405.00*
The CMC is an extremely powerful super-macro accessory lens optimized for use with both fixed-lens compact, mirrorless interchangeable lens, and DSLR cameras. Part of Nauticam's in-house lineup of wet and dry optics, these accessory lenses are purpose built and rigorously tested to outperform any other optics on the market.
Introducing CMC-1
Smaler, lighter, stronger
While the Nauticam Super Macro Converter (SMC) design inspired the development of the Compact Macro Converter, the CMC is actually more powerful. The CMC provides more magnification than the SMC with all compatible compact camera systems for which it was designed.
As expected, the CMC provides more magnification than any compact camera tested can achieve on its own, and does so with improved working distance. This combination makes CMC ideal for tiny, skittish subjects.
Using the popular RX100V as an example, the CMC-1 results in a magnification of 2.3X the smallest subject the camera is capable of photographing with no accessory lens (34.5mm v 80mm), and it does so with 1.4X the working distance (56mm v 80mm).
Results with the Canon G7X are even more stunning, providing 3.0X magnification at approximately 2.4X the working distance. To achieve the same image sizes with sealed magnifying lenses a +15 Diopter or stronger would be required, but no +15 Diopter lens can match the overall image quality of CMC-1. This is achieved while maintaining the smallest size and weight possible.
Breakthroug Lens Design
Prior to the development of the Nauticam accessory macro conversion lenses, achieving super macro underwater meant using tools that were designed for in-air use. These tools simply do not take into account the physics of shooting through water. Thanks to Edward Lai, Managing Director of Nauticam, the CMC-1 takes a radically different approach: hundreds of engineering hours utilizing computer software to model a lens that complements an entire system – camera, lens, port, air, and water – as a whole. This accounts for the critical air-water interfaces in a conversion lens design to achieve the best image quality possible. The improvements are stunning, measurable and a new standard in underwater macro imaging.
Uncompromised optical Quality
The CMC-1 is constructed from lenses precision crafted of specially formulated low-dispersion optical-grade glass, ground to the most demanding standards. This means greater sharpness and contrast on every shot and extraordinary resolution rivaling a macro lens used in air. Broadband anti-refective coatings effectively reduce common optical issues such as chromatic aberrations, coma, spherical aberration, and field deformation associated with underwater macro photography using traditional magnifying lenses. This means superior light transmission, accurate color and no distortion or vignetting in the most demanding situations. These exceptional optics are assembled in a rugged hard anodized aluminum housing, and nitrogen purged during assembly to eliminate fogging.
The CMC-1 is compatible with a variety of camera systems, but the most impressive increase in magnification comes when paired with the Olympus M.ZUIKO DIGITAL ED 60mm f/2.8 Macro Lens for M43 Systems. This combination achieves a 2:1 reproduction ratio. This translates into an image 8.5mm X 6.3MM, and one of the most powerful macro imaging systems available.
Optimized for Autofocus
By utilizing a specially developed algorithm in the optimization process, the CMC-1 renders superior image quality over the full focusing range of the camera lens. This, combined with the high brightness and contrast of the image, allows the autofocus system of the camera to work well – often better than less powerful close focus lenses. Just as important are the out-of-focus (Bokeh) portions of the image that exhibit the same creamy smooth quality that photographers appreciate when shooting macro in air – all without color fringing common to traditional magnifying lenses.
Avoiding Diffraction
Due to the overall superior optical performance and precision focus of the CMC-1 it is possible to shoot larger apertures with excellent image quality. This avoids reaching the diffraction limit of high resolution sensors, and allows selective focus effects with narrow depth of field in super macro images.
Also compatible with Nikon AF-S 60mm Macro
While designed with compact cameras in mind, compatibility with larger formats has proven to be possible in some cases. Nikon AF-S 60mm Macro (not compatible with the earlier SMC-1) provides 1.5 : 1 Reproduction Ratio when with combined CMC-1. This combination is extremely versatile, covering fish portraits, 1:1 macro, and now 1.5:1 super macro on the same dive.
Mounting and Using the CMC-1
The CMC-1 ships with the common 67mm threaded lens mount. The CMC-1 has a protruding rear lens element, designed to place the accessory optic as close to the camera lens port as is possible, providing the best overall image quality when used with flip lens adapters. A flush mount adapter ring is used when attaching CMC-1 directly to an underwater housing, and is included with the lens.
Flip lens holders, available to suit most Nauticam housings and lens ports, provide the fastest and most convenient lens mount possible. The lens is always threaded in place, and available to be flipped down as needed.
on stock
Bayonet Mount Adaptor for SMC/CMC
€55.00*
In order to use the CMC/SMC with the Bayonet Mount System this adapter is required. It threads onto the CMC or SMC.
on stock
Compact Macro Converter CMC-2
€360.00*
INTRODUCING CMC-2
The CMC-1 became the benchmark other lenses are measured against with extremely high magnification and overall sharpness. The CMC-2 is a follow-up designed to give photographers using compact systems more magnification choices without sacrificing quality. New underwater photographers, or new system owners, will appreciate an easier-to-use lens with more accurate autofocus performance than stronger lenses can offer. More experienced users will find that CMC-2 is an ideal companion to CMC-1, allowing the perfect lens to be selected based on the subject size.
IMPROVED SHARPNESS
During pre-production testing we noticed a stunning increase in overall image sharpness when comparing shots taken with CMC-2 to those behind a flat port with no accessory lens whatsoever.
It became clear that with both compact cameras at full telephoto and mirrorless interchangeable lens systems the conversion lens markedly improved overall sharpness.
This is counterintuitive, as conventional wisdom implies that any conversion lens reduces image quality. In this case, the flat port degrades overall sharpness, and the optical correction offered by the CMC-2 restores it.
Simply put – an image taken underwater with CMC-2 is sharper than the same image taken with no accessory lens mounted. These are true water-contact corrective optics!
BREAKTHROUGH LENS DESIGN
Prior to the development of the Nauticam accessory macro conversion lenses, achieving "super macro" underwater meant using tools that were designed for in-air use. These tools simply do not take into account the physics of shooting in water. Thanks to Edward Lai, Managing Director of Nauticam, the CMC-2 takes a radically different approach: hundreds of engineering hours utilizing computer software to model an accessory lens that complements an entire system – camera, lens, port, air, and water – as a whole. This accounts for the critical air-water interfaces in a conversion lens design to achieve the best image quality possible. The improvements are stunning, measurable and a new standard in underwater macro imaging.
UNCOMPROMISING OPTICAL QUALITY
The CMC-2, like all Nauticam Macro Converters, is constructed from lenses precision crafted of specially formulated low dispersion optical grade glass, ground to the most demanding standards. This means greater sharpness and contrast on every shot and extraordinary resolution rivaling a macro lens used in air. Broadband anti-reflective coatings effectively reduce common optical issues such as chromatic aberrations, coma, spherical aberration, and field deformation associated with underwater macro photography using traditional magnifying lenses. This means superior light transmission, accurate color and no distortion and vignetting in the most demanding situations.
These exceptional optics are assembled in a rugged hard anodized aluminum housing, and nitrogen purged during assembly to eliminate fogging.
STUNNING MAGNIFICATION
The CMC-2 is the less powerful of the two Nauticam Macro Converters designed for compact cameras, but magnification when compared to the capabilities of these cameras with no accessory lens is still very impressive.
As an example, the popular Sony RX100V can capture an image area 160mm (6.3 in.) wide at its full telephoto zoom position at its minimum focus distance. With the addition of CMC-2, that image area is reduced to 55mm (2.2 in) wide. CMC-1 brings the minimum focus distance even closer, allowing a captured frame 36mm (1.4 in) wide.
OPTIMIZED FOR AUTOFOCUS
By utilizing a specially developed algorithm in the lens design process, the CMC-2 renders superior image quality over the full focusing range of the camera lens. This, combined with the high brightness and contrast of the image, allows the autofocus system of the camera to work well – often better than less powerful close focus lenses. Just as important are the out-of-focus (Bokeh) portions of the image that exhibit the same creamy smooth quality that photographers appreciate when shooting macro in air – all without color fringing common to traditional magnifying lenses.
AVOIDING DIFFRACTION
Due to the overall superior optical performance and precision focus of the CMC-2 it is possible to shoot larger apertures with excellent image quality. This avoids reaching the diffraction limit of high resolution sensors, and allows selective focus effects with narrow depth of field in super macro images.
MOUNTING, AND USING THE CMC-2
The CMC-2 ships with the common 67mm threaded lens mount. The lens has a protruding rear element, designed to place the accessory optic as close to the camera lens port as is possible, providing the best overall image quality when used with flip lens adapters. A flush mount adapter ring is used when attaching CMC-2 directly to an underwater housing, and is included with the lens. Flip and Bayonet Lens Mounts are available as accessories.
MOUNTING CONFIGURATIONS
The same Nauticam bayonet system designed with the Wet Wide Lens (WWL-1) is also compatible with CMC-2. (P/N 81302). The bayonet mounting system is the attachment method of choice for shooting both macro and wide angle on the same dive.
Nothing beats the convenience of flip adaptors, allowing the accessory lenses to be flipped in place when needed, and conveniently swung out of the way for normal lens shooting. A flip adaptor is the best mounting system for macro only dives, or camera systems that don't support macro and wide angle lenses on the same dive (such as Canon G7X Mark II)
The new M67 Double Flip Holder for M67 Macro Ports, P/N 25108 allows both CMC-1 and CMC-2 to be used on the same dive for multiple macro framing options.
A WORD ON MAGNIFICATION
The industry standard macro lens magnification measure is a dioptric power, but we don't feel that is actually that useful. Dioptric numbers can be misleading. They are often multiple lenses stacked together, and the resulting stack doesn't always yield the power of its individual components.
In an attempt to make the power and utility of these lenses less confusing, we offer a simplified magnification factor. CMC-2 offers 2.8x magnification (as an average) with compact cameras currently supported by Nauticam housings. For comparison, CMC-1 results in 4.5x average magnification.
on stock
M67 to Bayonet Mount Converter II
€100.00*
This Bayonet Mount Converter II is designed for M67 threaded ports to use with Water Contact Optics. This works with 1st generation bayonet mount optics as well as the new 2nd generation (WWL-C).
on stock
UCL-67 Close-up Lens (M67)
€345.00*
The UCL-67 M67 underwater close-up lens is designed to deliver high magnification yet superior image quality best suited to full frame SLR macro lenses of focal length 60mm - 100mm with comfortable long working distance enabling easy lighting. The lens also supports mirrorless as well as compact system.
Compatible Lens
60mm-100mm range macro lens for full-frame SLR (*1)
40mm-60mm range macro lens exclusively designed for APS-C (*1)
45mm-60mm range macro lens (*1), standard zoom lens (*2) for Micro Four Thirds
Compact digital camera with maximum optical zoom 5x or less (*2)
(*1) Vignetting may be observed depends on the distance between master lens and lens port glass and/or UCL-67 and lens port glass.
(*2) Only usable when the focal length is between 60mm and 100mm range at 35mm film equivalent. Beyond this range, there will be vignetting at the wide side and deteriorated image quality at the telephoto side.
Powerful magnification with focal length 67mm (+15 diopter). Maximum magnification of the UCL-67 with range of 100mm macro lens for full frame SLR is 2.76x (area ratio: 7.65x) at the minimum focusing distance. (*3)
While the UCL-67 delivers high magnification, it still offers long working distance. When using with 100mm range macro lens for SLR, working distance is 52mm (83.4mm from housing port surface) at minimum focusing distance (*3).
Together with its compact size, the lens supports friendly lighting even at minimum focusing distance.
(*3) When using for AF-S VR Micro-Nikkor 105mm f/2.8G IF-ED.
The lens is consists of 4 elements in 3 groups using high refractive index glass to accommodate with a macro lens for full-frame digital SLR with compact body yet delivering high magnification and superior image quality.
Employing achromatic lens effectively suppresses chromatic aberration and anti-reflection coating on all surfaces suppresses flare/ghost. Designed sole use underwater to provide effectively suppressed aberrations in all focal range and unparalleled high quality image on any supported shooting range. (*4)
(*4) This product is designed for underwater use only. Using on land will have less magnification, distortion, vignetting etc.
Optional "Lens Adapter Ring for UCL-67" is attached on the M65 screw thread of the UCL-67 allowing to stack INON M67 series, "UCL-165M67"/"UCL-330" on the front side of the UCL-67 to support even higher magnification for super macro imaging needs. (*5)
(*5) Other higher magnification close-up lens, "UCL-100M67" and "UCL-67 M67" are not usable as those combinations will have significantly degrade image Quality.
Lens mount is highly versatile screw type "M67 Mount".
Optional "M67 Flip Mount Adapter for UCL-67" is available to replace with original M67 screw mount to use the lens on a flip mount such as Nauticam flip lens holder etc. This adapter allows the UCL-67 to locate close to housing lens port.(*6) (*7)
(*6) Not compatible with a flip lens holder with 57mm or smaller inner diameter such as from SAGA.
(*7) Original lens mount is replaceable by a customer using precision Philips screw driver to unscrew fixing screws.
on stock
WFL13 Close-up Lens +18 by Weefine
€275.00*
WEEFINE WFL13 is a premium underwater equipment close-up lens. It comes with a +18 diopter (Air and Underwater) in optical power and allow the close-up shooting in a very short object distance (30mm-53mm).
Weefine WFL13 is designed by 3 high quality optical glasses with an achromatic doublet.This achromatic helps to reduce the axle chromatic aberration.